Last active
March 7, 2018 12:29
-
-
Save skygunner/2a709e4836d4cd601e9ae646edcc5098 to your computer and use it in GitHub Desktop.
D-Link DIR-865L Router Notes/flashing/CFE Mini/Reset Factory defaults
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Dlink DIR-865L Router | |
| Reset to factory default settings: | |
| While is the router is powered on and running, | |
| push a pin into the reset hole behind the router and keep pressing it for about 6 seconds, the LED turns off; | |
| release the reset button and the router shall resetted. | |
| Recovery/Upgrade: | |
| 1. Switch off the router | |
| 2. Push a pin into the reset hole behind the router (above the power switch), hold it in there and power on the router, | |
| the LED turns orange and the router is now in recovery/rescue mode (Mini CFE http page) | |
| 3. Configure you pc's ip to be 192.168.0.2 mask 255.255.255.0 (or any 192.168.0.x) | |
| 4. Access router's webpage at 192.168.0.1, and upload the downloaded firmware | |
| 5. Wait for router to reboot | |
| 6. For Tomato firmware Default router address is at 192.168.1.1, username: root or admin, password: admin | |
| Compaible firmeware: | |
| Tomato Shibby 131 | |
| [V05] https://www.dropbox.com/s/gcik5qw1a19ibdy/tomato-dir865l_V05-shibby131-no_nginx-AIO.trx?dl=0 | |
| MultiWan |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment