Skip to content

Instantly share code, notes, and snippets.

@slav123

slav123/material.xml

Created July 7, 2020 13:00
Show Gist options
  • Save slav123/14bdc70783fe27385a530bf73f3120e4 to your computer and use it in GitHub Desktop.
Save slav123/14bdc70783fe27385a530bf73f3120e4 to your computer and use it in GitHub Desktop.
Download ZIP
Material and power speed ratio for laser engraver / cutter
Raw
material.xml
<?xml version="1.0" standalone="yes"?>
<MaterialDB xmlns="http://tempuri.org/MaterialDB.xsd">
<Materials>
<id>3d3e2cff-f117-4df7-a7c3-09e4fd62ce44</id>
<Visible>true</Visible>
<Model>Ortur LU7W (1.5W)</Model>
<Material>Plywood</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>100</Power>
<Speed>2000</Speed>
<Cycles>1</Cycles>
<Remarks>It need to be adjusted based on different woods, different colors.</Remarks>
</Materials>
<Materials>
<id>d22539c7-dd4a-41b6-b004-c5de2f5fdea2</id>
<Visible>true</Visible>
<Model>Ortur LU7W (1.5W)</Model>
<Material>Paperboard</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>100</Power>
<Speed>3000</Speed>
<Cycles>1</Cycles>
<Remarks>It need to be adjusted based on different thickness paperboards, different colors.</Remarks>
</Materials>
<Materials>
<id>57137551-3ed5-4d9f-9cd5-50fa92007b2a</id>
<Visible>true</Visible>
<Model>Ortur LU7W (1.5W)</Model>
<Material>Paperboard</Material>
<Thickness>-</Thickness>
<Action>Cut</Action>
<Power>100</Power>
<Speed>200</Speed>
<Cycles>2</Cycles>
<Remarks>It need to be adjusted based on different thickness paperboards, different colors.</Remarks>
</Materials>
<Materials>
<id>d00cbacc-a032-4122-bc28-7326875a808f</id>
<Visible>true</Visible>
<Model>Ortur LU7W (1.5W)</Model>
<Material>Kraft Paper</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>100</Power>
<Speed>3000</Speed>
<Cycles>1</Cycles>
<Remarks>It need to be adjusted based on different colors.</Remarks>
</Materials>
<Materials>
<id>38db0905-be2c-4687-8f9d-f45a8ef6ddb9</id>
<Visible>true</Visible>
<Model>Ortur LU7W (1.5W)</Model>
<Material>Kraft Paper</Material>
<Thickness>250 g/mq</Thickness>
<Action>Cut</Action>
<Power>100</Power>
<Speed>200</Speed>
<Cycles>1</Cycles>
<Remarks>It need to be adjusted based on different colors.</Remarks>
</Materials>
<Materials>
<id>05d3ec8c-9b5f-465c-9c9b-abfc5c363612</id>
<Visible>true</Visible>
<Model>Ortur LU7W (1.5W)</Model>
<Material>KT Board (dark color)</Material>
<Thickness>5mm</Thickness>
<Action>Cut</Action>
<Power>100</Power>
<Speed>600</Speed>
<Cycles>1</Cycles>
<Remarks>Pay attention to toxic gases! It need to be adjusted based on different colors. There will be black edges after cutting.</Remarks>
</Materials>
<Materials>
<id>a9358fb5-a97f-4c1c-82bc-def9f9de67da</id>
<Visible>true</Visible>
<Model>Ortur LU7W (1.5W)</Model>
<Material>Non-woven fabrics (dark color)</Material>
<Thickness>0.5mm</Thickness>
<Action>Cut</Action>
<Power>100</Power>
<Speed>500</Speed>
<Cycles>1</Cycles>
<Remarks>Cannot cut Non-woven in white color. It need to be adjusted based on different colors. There will be black edges after cutting</Remarks>
</Materials>
<Materials>
<id>86f0732e-f7ad-4521-bd29-4ecaff41c8cc</id>
<Visible>true</Visible>
<Model>Ortur LU7W (1.5W)</Model>
<Material>Cotton Cloth (dark color)</Material>
<Thickness>-</Thickness>
<Action>Cut</Action>
<Power>100</Power>
<Speed>500</Speed>
<Cycles>1</Cycles>
<Remarks>Some cotton blended fabrics may be melt. It need to be adjusted based on different colors. There will be black edges after cutting</Remarks>
</Materials>
<Materials>
<id>02374c7b-a1f9-4989-b691-d5fc1d0ee693</id>
<Visible>true</Visible>
<Model>Ortur LU7W (1.5W)</Model>
<Material>Leather</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>100</Power>
<Speed>3000</Speed>
<Cycles>1</Cycles>
<Remarks>It need to be adjusted based on different leathers, different colors.</Remarks>
</Materials>
<Materials>
<id>100a3369-09bd-4a02-96aa-6425a2efdaa9</id>
<Visible>true</Visible>
<Model>Ortur LU7W (1.5W)</Model>
<Material>Leather</Material>
<Thickness>0.7mm</Thickness>
<Action>Cut</Action>
<Power>100</Power>
<Speed>100</Speed>
<Cycles>1</Cycles>
<Remarks>It need to be adjusted based on different leathers, different colors.</Remarks>
</Materials>
<Materials>
<id>0e4d66f0-ff9c-4bd9-b783-50e87f73c342</id>
<Visible>true</Visible>
<Model>Ortur LU7W (1.5W)</Model>
<Material>Plastic Sheet (dark color)</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>100</Power>
<Speed>2000</Speed>
<Cycles>1</Cycles>
<Remarks>Pay attention to toxic gases! Some plastic sheets may be melt. It need to be adjusted based on different colors, different colors.</Remarks>
</Materials>
<Materials>
<id>262f124e-01ac-428e-89c2-aceb9e0a76c7</id>
<Visible>true</Visible>
<Model>Ortur LU7W (1.5W)</Model>
<Material>Solid Wood</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>100</Power>
<Speed>2000</Speed>
<Cycles>1</Cycles>
<Remarks>It need to be adjusted based on different woods, different colors.</Remarks>
</Materials>
<Materials>
<id>8556bccb-da77-4d28-afb8-1c037bb62cb4</id>
<Visible>true</Visible>
<Model>Ortur LU7W (1.5W)</Model>
<Material>Acrylic</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>100</Power>
<Speed>2000</Speed>
<Cycles>1</Cycles>
<Remarks>Pay attention to toxic gases! Cannot engrave transparent Acrylic directly, need to paste Kraft paper film on the surface.</Remarks>
</Materials>
<Materials>
<id>59b2af01-4f0e-469e-8708-d0f9d21fcdf3</id>
<Visible>true</Visible>
<Model>Ortur LU7W (1.5W)</Model>
<Material>Powder Coated Metal</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>100</Power>
<Speed>2000</Speed>
<Cycles>1</Cycles>
<Remarks>Engraved on powder coating. It need to be adjusted based on different finishings and colors.</Remarks>
</Materials>
<Materials>
<id>86450e5e-9e6a-4679-9a83-6a411ea947f5</id>
<Visible>true</Visible>
<Model>Ortur LU7W (1.5W)</Model>
<Material>Paint Sprayed Metal</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>100</Power>
<Speed>2000</Speed>
<Cycles>1</Cycles>
<Remarks>Engraved on Paint layer. It need to be adjusted based on different finishings and colors.</Remarks>
</Materials>
<Materials>
<id>8702efe1-2b35-4508-9fed-fc1b0c6505c2</id>
<Visible>true</Visible>
<Model>Ortur LU7W (1.5W)</Model>
<Material>Plated Metal</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>100</Power>
<Speed>2000</Speed>
<Cycles>1</Cycles>
<Remarks>It's the surface color turned to be other color. Need to use Marker to black the finishing first. It need to be adjusted based on different finishings and colors.</Remarks>
</Materials>
<Materials>
<id>3d07cee1-e129-4dfd-ac2b-2d945df2b651</id>
<Visible>true</Visible>
<Model>Ortur LU7W (1.5W)</Model>
<Material>Anodised Aluminium</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>100</Power>
<Speed>2000</Speed>
<Cycles>1</Cycles>
<Remarks>It's the surface color turned to be other color. It need to be adjusted based on different finishings and colors.</Remarks>
</Materials>
<Materials>
<id>a46e8208-5ef2-4cef-b79b-dcc09720a289</id>
<Visible>true</Visible>
<Model>Ortur LU15W (4.5W)</Model>
<Material>Plywood</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>100</Power>
<Speed>3000</Speed>
<Cycles>1</Cycles>
<Remarks>It need to be adjusted based on different woods, different colors.</Remarks>
</Materials>
<Materials>
<id>0c88ef11-670c-4ffb-ab76-351f893d999a</id>
<Visible>true</Visible>
<Model>Ortur LU15W (4.5W)</Model>
<Material>Plywood</Material>
<Thickness>1.5mm</Thickness>
<Action>Cut</Action>
<Power>100</Power>
<Speed>200</Speed>
<Cycles>2</Cycles>
<Remarks>It need to be adjusted based on different woods, different colors.</Remarks>
</Materials>
<Materials>
<id>6b0151a7-ac03-4d5f-bcb3-4af3db7d5534</id>
<Visible>true</Visible>
<Model>Ortur LU15W (4.5W)</Model>
<Material>Plywood</Material>
<Thickness>3mm</Thickness>
<Action>Cut</Action>
<Power>100</Power>
<Speed>100</Speed>
<Cycles>3</Cycles>
<Remarks>It need to be adjusted based on different woods, different colors.</Remarks>
</Materials>
<Materials>
<id>bdc160a7-8fde-4d8e-8894-8451aea30853</id>
<Visible>true</Visible>
<Model>Ortur LU15W (4.5W)</Model>
<Material>Paperboard</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>30</Power>
<Speed>3000</Speed>
<Cycles>1</Cycles>
<Remarks>It need to be adjusted based on different thickness paperboards, different colors.</Remarks>
</Materials>
<Materials>
<id>ab1a18ec-a9d7-4e80-8976-277c35f56590</id>
<Visible>true</Visible>
<Model>Ortur LU15W (4.5W)</Model>
<Material>Paperboard</Material>
<Thickness>-</Thickness>
<Action>Cut</Action>
<Power>100</Power>
<Speed>1000</Speed>
<Cycles>4</Cycles>
<Remarks>It need to be adjusted based on different thickness paperboards, different colors.</Remarks>
</Materials>
<Materials>
<id>65469d2b-2f96-4b4f-b473-425d5d1c4049</id>
<Visible>true</Visible>
<Model>Ortur LU15W (4.5W)</Model>
<Material>Kraft Paper</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>30</Power>
<Speed>3000</Speed>
<Cycles>1</Cycles>
<Remarks>It need to be adjusted based on different colors.</Remarks>
</Materials>
<Materials>
<id>6d4e78b6-72ea-4436-a134-f668b2b5e0b7</id>
<Visible>true</Visible>
<Model>Ortur LU15W (4.5W)</Model>
<Material>Kraft Paper</Material>
<Thickness>250 g/mq</Thickness>
<Action>Cut</Action>
<Power>100</Power>
<Speed>800</Speed>
<Cycles>1</Cycles>
<Remarks>It need to be adjusted based on different colors.</Remarks>
</Materials>
<Materials>
<id>b2ef2f8f-5254-45b1-9a5b-21632b2158d0</id>
<Visible>true</Visible>
<Model>Ortur LU15W (4.5W)</Model>
<Material>KT Board (dark color)</Material>
<Thickness>5mm</Thickness>
<Action>Cut</Action>
<Power>100</Power>
<Speed>2000</Speed>
<Cycles>1</Cycles>
<Remarks>Pay attention to toxic gases! It need to be adjusted based on different colors. There will be black edges after cutting.</Remarks>
</Materials>
<Materials>
<id>b22ede75-6b22-4b66-ba39-d4b24f8d07bf</id>
<Visible>true</Visible>
<Model>Ortur LU15W (4.5W)</Model>
<Material>Cotton Cloth (dark color)</Material>
<Thickness>-</Thickness>
<Action>Cut</Action>
<Power>100</Power>
<Speed>1000</Speed>
<Cycles>1</Cycles>
<Remarks>Some cotton blended fabrics may be melt. It need to be adjusted based on different colors. There will be black edges after cutting.</Remarks>
</Materials>
<Materials>
<id>c765a10b-04e4-482f-baea-7e99f5c41d30</id>
<Visible>true</Visible>
<Model>Ortur LU15W (4.5W)</Model>
<Material>Leather</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>40</Power>
<Speed>3000</Speed>
<Cycles>1</Cycles>
<Remarks>It need to be adjusted based on different leathers, different colors.</Remarks>
</Materials>
<Materials>
<id>9ada632a-07e3-4e46-ba91-3bf77ae5418f</id>
<Visible>true</Visible>
<Model>Ortur LU15W (4.5W)</Model>
<Material>Leather</Material>
<Thickness>0.7mm</Thickness>
<Action>Cut</Action>
<Power>100</Power>
<Speed>300</Speed>
<Cycles>1</Cycles>
<Remarks>It need to be adjusted based on different leathers, different colors.</Remarks>
</Materials>
<Materials>
<id>188fa707-324f-4ccc-bc3b-3403db8efda0</id>
<Visible>true</Visible>
<Model>Ortur LU15W (4.5W)</Model>
<Material>Plastic Sheet (dark color)</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>100</Power>
<Speed>3000</Speed>
<Cycles>1</Cycles>
<Remarks>Some plastic sheets may be melt. It need to be adjusted based on different colors,different colors.</Remarks>
</Materials>
<Materials>
<id>2b7f0cc3-06f7-4d94-91f9-d4a30aaf2468</id>
<Visible>true</Visible>
<Model>Ortur LU15W (4.5W)</Model>
<Material>Solid Wood</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>100</Power>
<Speed>3000</Speed>
<Cycles>1</Cycles>
<Remarks>It need to be adjusted based on different woods, different colors.</Remarks>
</Materials>
<Materials>
<id>3f52bce2-1699-4d34-98f0-2fd4c4f26423</id>
<Visible>true</Visible>
<Model>Ortur LU15W (4.5W)</Model>
<Material>Acrylic</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>100</Power>
<Speed>3000</Speed>
<Cycles>1</Cycles>
<Remarks>Pay attention to toxic gases! Cannot engrave transparent Acrylic directly, need to paste Kraft paper film on the surface.</Remarks>
</Materials>
<Materials>
<id>9f10aef9-84be-4931-90a9-15cbea1a0052</id>
<Visible>true</Visible>
<Model>Ortur LU15W (4.5W)</Model>
<Material>Powder Coated Metal</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>100</Power>
<Speed>3000</Speed>
<Cycles>1</Cycles>
<Remarks>Engraved on powder coating. It need to be adjusted based on different finishings and colors.</Remarks>
</Materials>
<Materials>
<id>6ab9e617-76ba-4fd3-baff-4060f8970faf</id>
<Visible>true</Visible>
<Model>Ortur LU15W (4.5W)</Model>
<Material>Paint Sprayed Metal</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>100</Power>
<Speed>3000</Speed>
<Cycles>1</Cycles>
<Remarks>Engraved on powder coating. It need to be adjusted based on different finishings and colors.</Remarks>
</Materials>
<Materials>
<id>d1945d41-e5ef-4446-be81-87a50365ad6f</id>
<Visible>true</Visible>
<Model>Ortur LU15W (4.5W)</Model>
<Material>Plated Metal</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>100</Power>
<Speed>3000</Speed>
<Cycles>1</Cycles>
<Remarks>It's the surface color turned to be other color. Need to use Marker to balck the finishing first. It need to be adjusted based on different finishings and colors.</Remarks>
</Materials>
<Materials>
<id>3fbf5ab4-30e2-40be-afc2-16911f4b4eeb</id>
<Visible>true</Visible>
<Model>Ortur LU15W (4.5W)</Model>
<Material>Anodised Aluminium</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>100</Power>
<Speed>3000</Speed>
<Cycles>1</Cycles>
<Remarks>It's the surface color turned to be other color. It need to be adjusted based on different finishings and colors.</Remarks>
</Materials>
<Materials>
<id>6dbab6d4-542a-4212-828d-ea80a422b816</id>
<Visible>true</Visible>
<Model>Ortur LU15W (4.5W)</Model>
<Material>Cobblestone</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>100</Power>
<Speed>100</Speed>
<Cycles>1</Cycles>
<Remarks>The surface should be coated with acrylic dye heat transfer film.</Remarks>
</Materials>
<Materials>
<id>d1560995-a870-4fe8-83b5-5dadbff8fbdd</id>
<Visible>true</Visible>
<Model>Ortur LU15W (4.5W)</Model>
<Material>Stainless Steel</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>100</Power>
<Speed>100</Speed>
<Cycles>1</Cycles>
<Remarks>The surface should be painted black by Marker Pen.</Remarks>
</Materials>
<Materials>
<id>c739e3ee-c38b-47a7-b1ff-79d02928231e</id>
<Visible>true</Visible>
<Model>Ortur LU20W (5.5W)</Model>
<Material>Plywood</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>80</Power>
<Speed>3000</Speed>
<Cycles>1</Cycles>
<Remarks>It need to be adjusted based on different woods, different colors.</Remarks>
</Materials>
<Materials>
<id>a9254766-dc59-457e-8071-846a61b02e53</id>
<Visible>true</Visible>
<Model>Ortur LU20W (5.5W)</Model>
<Material>Plywood</Material>
<Thickness>1.5mm</Thickness>
<Action>Cut</Action>
<Power>100</Power>
<Speed>200</Speed>
<Cycles>1</Cycles>
<Remarks>It need to be adjusted based on different woods, different colors.</Remarks>
</Materials>
<Materials>
<id>180109df-7de5-42b8-b762-a3a99da8c4d9</id>
<Visible>true</Visible>
<Model>Ortur LU20W (5.5W)</Model>
<Material>Plywood</Material>
<Thickness>3mm</Thickness>
<Action>Cut</Action>
<Power>100</Power>
<Speed>100</Speed>
<Cycles>2</Cycles>
<Remarks>It need to be adjusted based on different woods, different colors.</Remarks>
</Materials>
<Materials>
<id>c644379f-f7fc-4c43-a413-94f2899b11db</id>
<Visible>true</Visible>
<Model>Ortur LU20W (5.5W)</Model>
<Material>Paperboard</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>20</Power>
<Speed>3000</Speed>
<Cycles>1</Cycles>
<Remarks>It need to be adjusted based on different thickness paperboards, different colors.</Remarks>
</Materials>
<Materials>
<id>8ecff531-c5d4-4202-9448-e300429f99e2</id>
<Visible>true</Visible>
<Model>Ortur LU20W (5.5W)</Model>
<Material>Paperboard</Material>
<Thickness>-</Thickness>
<Action>Cut</Action>
<Power>100</Power>
<Speed>1000</Speed>
<Cycles>3</Cycles>
<Remarks>It need to be adjusted based on different thickness paperboards, different colors.</Remarks>
</Materials>
<Materials>
<id>9423348a-55db-4b0e-ab1e-68079740ca2a</id>
<Visible>true</Visible>
<Model>Ortur LU20W (5.5W)</Model>
<Material>Kraft Paper</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>20</Power>
<Speed>3000</Speed>
<Cycles>1</Cycles>
<Remarks>It need to be adjusted based on different colors.</Remarks>
</Materials>
<Materials>
<id>f7368a6e-3155-4c56-8294-3aa9e640ca20</id>
<Visible>true</Visible>
<Model>Ortur LU20W (5.5W)</Model>
<Material>KT Board (dark color)</Material>
<Thickness>5mm</Thickness>
<Action>Cut</Action>
<Power>100</Power>
<Speed>2000</Speed>
<Cycles>1</Cycles>
<Remarks>Pay attention to toxic gases! It need to be adjusted based on different colors. There will be black edges after cutting.</Remarks>
</Materials>
<Materials>
<id>c033ab40-7a52-4b9f-88fc-8b5e636a8704</id>
<Visible>true</Visible>
<Model>Ortur LU20W (5.5W)</Model>
<Material>Non-woven fabrics (dark color)</Material>
<Thickness>0.5mm</Thickness>
<Action>Cut</Action>
<Power>100</Power>
<Speed>1600</Speed>
<Cycles>1</Cycles>
<Remarks>It need to be adjusted based on different colors. There will be black edges after cutting</Remarks>
</Materials>
<Materials>
<id>ef98a292-1b2b-4be9-88c1-26de37c32fc2</id>
<Visible>true</Visible>
<Model>Ortur LU20W (5.5W)</Model>
<Material>Cotton Cloth (dark color)</Material>
<Thickness>-</Thickness>
<Action>Cut</Action>
<Power>100</Power>
<Speed>1200</Speed>
<Cycles>1</Cycles>
<Remarks>Some cotton blended fabrics may be melt. It need to be adjusted based on different colors. There will be black edges after cutting</Remarks>
</Materials>
<Materials>
<id>94d6b6ae-4bed-4923-a1c4-bba1285862fb</id>
<Visible>true</Visible>
<Model>Ortur LU20W (5.5W)</Model>
<Material>Leather</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>40</Power>
<Speed>3000</Speed>
<Cycles>1</Cycles>
<Remarks>It need to be adjusted based on different leathers, different colors.</Remarks>
</Materials>
<Materials>
<id>c7bf2bcf-6fa3-42ff-8975-4cd418c7963f</id>
<Visible>true</Visible>
<Model>Ortur LU20W (5.5W)</Model>
<Material>Leather</Material>
<Thickness>0.7mm</Thickness>
<Action>Cut</Action>
<Power>100</Power>
<Speed>500</Speed>
<Cycles>1</Cycles>
<Remarks>It need to be adjusted based on different leathers, different colors.</Remarks>
</Materials>
<Materials>
<id>d15db21e-6d8a-4460-b57b-c079b0ca7d0e</id>
<Visible>true</Visible>
<Model>Ortur LU20W (5.5W)</Model>
<Material>Plastic Sheet (dark color)</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>80</Power>
<Speed>3000</Speed>
<Cycles>1</Cycles>
<Remarks>Some plastic sheets may be melt. It need to be adjusted based on different colors,different colors.</Remarks>
</Materials>
<Materials>
<id>6f669bad-402f-4f98-925e-8e48b9496748</id>
<Visible>true</Visible>
<Model>Ortur LU20W (5.5W)</Model>
<Material>Solid Wood</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>80</Power>
<Speed>3000</Speed>
<Cycles>1</Cycles>
<Remarks>It need to be adjusted based on different woods, different colors.</Remarks>
</Materials>
<Materials>
<id>b0240e9c-70b3-4617-ad7d-4187244fee1d</id>
<Visible>true</Visible>
<Model>Ortur LU20W (5.5W)</Model>
<Material>Acrylic</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>80</Power>
<Speed>3000</Speed>
<Cycles>1</Cycles>
<Remarks>Pay attention to toxic gases! Cannot engrave transparent Acrylic directly, need to paste Kraft paper film on the surface.</Remarks>
</Materials>
<Materials>
<id>7b62a276-944b-4ca7-bf1d-731c0e9b9734</id>
<Visible>true</Visible>
<Model>Ortur LU20W (5.5W)</Model>
<Material>Powder Coated Metal</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>100</Power>
<Speed>3000</Speed>
<Cycles>1</Cycles>
<Remarks>Engraved on powder coating. It need to be adjusted based on different finishings and colors.</Remarks>
</Materials>
<Materials>
<id>a190a0b1-8418-44e2-a756-4bafc8c467f1</id>
<Visible>true</Visible>
<Model>Ortur LU20W (5.5W)</Model>
<Material>Paint Sprayed Metal</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>100</Power>
<Speed>3000</Speed>
<Cycles>1</Cycles>
<Remarks>Engraved on powder coating. It need to be adjusted based on different finishings and colors.</Remarks>
</Materials>
<Materials>
<id>96ce9e1e-600e-4028-b81d-0e6fbae7deea</id>
<Visible>true</Visible>
<Model>Ortur LU20W (5.5W)</Model>
<Material>Plated Metal</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>100</Power>
<Speed>3000</Speed>
<Cycles>1</Cycles>
<Remarks>It's the surface color turned to be other color. Need to use Marker to balck the finishing first. It need to be adjusted based on different finishings and colors.</Remarks>
</Materials>
<Materials>
<id>76079fbb-f472-4945-9488-48f1275d6732</id>
<Visible>true</Visible>
<Model>Ortur LU20W (5.5W)</Model>
<Material>Anodised Aluminium</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>100</Power>
<Speed>3000</Speed>
<Cycles>1</Cycles>
<Remarks>It's the surface color turned to be other color. It need to be adjusted based on different finishings and colors.</Remarks>
</Materials>
<Materials>
<id>14283b36-627f-4d91-81a0-5e2b6e0440a1</id>
<Visible>true</Visible>
<Model>Ortur LU20W (5.5W)</Model>
<Material>Cobblestone</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>100</Power>
<Speed>100</Speed>
<Cycles>1</Cycles>
<Remarks>The surface should be coated with acrylic dye heat transfer film.</Remarks>
</Materials>
<Materials>
<id>52b6d808-1e28-4a4b-898d-4b3674dd1f31</id>
<Visible>true</Visible>
<Model>Ortur LU20W (5.5W)</Model>
<Material>Stainless Steel</Material>
<Thickness>-</Thickness>
<Action>Engrave</Action>
<Power>100</Power>
<Speed>100</Speed>
<Cycles>1</Cycles>
<Remarks>The surface should be painted black by Marker Pen.</Remarks>
</Materials>
</MaterialDB>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment