Sigrok Timing Decoder with Frequency and Averaging

pd.py

##
## This file is part of the libsigrokdecode project.
##
## Copyright (C) 2014 Torsten Duwe <[email protected]>
## Copyright (C) 2014 Sebastien Bourdelin <[email protected]>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
##

import sigrokdecode as srd
from collections import deque
class SamplerateError(Exception):
    pass

def normalize_time(t):
    if t >= 1.0:
        return '%.3f s  (%.3f Hz)' % (t, (1/t))
    elif t >= 0.001:
        if 1/t/1000 < 1:
          return '%.3f ms (%.3f Hz)' % (t * 1000.0, (1/t))
        else:
          return '%.3f ms (%.3f kHz)' % (t * 1000.0, (1/t)/1000)
    elif t >= 0.000001:
        if 1/t/1000/1000 < 1:
          return '%.3f μs (%.3f kHz)' % (t * 1000.0 * 1000.0, (1/t)/1000)
        else:
          return '%.3f μs (%.3f MHz)' % (t * 1000.0 * 1000.0, (1/t)/1000/1000)
    elif t >= 0.000000001:
        if 1/t/1000/1000/1000:
          return '%.3f ns (%.3f MHz)' % (t * 1000.0 * 1000.0 * 1000.0, (1/t)/1000/1000)
        else:
          return '%.3f ns (%.3f GHz)' % (t * 1000.0 * 1000.0 * 1000.0, (1/t)/1000/1000/1000)
    else:
        return '%f' % t

class Decoder(srd.Decoder):
    api_version = 2
    id = 'timing'
    name = 'Timing'
    longname = 'Timing calculation with Frequency and Averaging'
    desc = 'Calculate time between edges.'
    license = 'gplv2+'
    inputs = ['logic']
    outputs = ['timing']
    channels = (
        {'id': 'data', 'name': 'Data', 'desc': 'Data line'},
    )
    annotations = (
        ('time',    'Time'),
        ('average', 'Average'),
    )
    annotation_rows = (
        ('time', 'Time', (0,)),
        ('average', 'Average', (1,)),
    )
    options = (
        { 'id': 'avg-period', 'desc': 'Averaging Period',  'default': 100 },
    )
    def __init__(self, **kwargs):
        self.samplerate = None
        self.oldpin = None
        self.last_samplenum = None
        self.last_n = deque()
        self.chunks = 0
        
    def metadata(self, key, value):
        if key == srd.SRD_CONF_SAMPLERATE:
            self.samplerate = value

    def start(self):
        self.out_ann = self.register(srd.OUTPUT_ANN)

    def decode(self, ss, es, data):
        if not self.samplerate:
            raise SamplerateError('Cannot decode without samplerate.')
        
        for (samplenum, (pin,)) in data:

            if self.oldpin is None:
                self.oldpin = pin
                self.last_samplenum = samplenum
                continue
    
            # It seems that the decoder gets passed the same samples
            # over and over again sometimes, so we have to make sure
            # we are only looking at samples we have not already seen
            # otherwise a big mess happens.
            if self.last_samplenum >= samplenum:
                continue
              
            if self.oldpin != pin:
                # print('%d %s' % (samplenum, pin))
                samples = samplenum - self.last_samplenum
                t = samples / self.samplerate
                self.chunks += 1
                
                # Don't insert the first chunk into the averaging as it is 
                # not complete probably.
                if self.last_samplenum is None or self.chunks < 2:
                  # Report the timing normalized.
                  self.put(self.last_samplenum, samplenum, self.out_ann,
                           [0, [normalize_time(t)]])                                     
                else:                  
                  if t > 0:
                    self.last_n.append(t)
                    # print (self.last_n)
                  
                  if len(self.last_n) > self.options['avg-period']:
                    self.last_n.popleft()
                  
                  #if len(self.last_n) < 2:
                  #  self.put(self.last_samplenum, samplenum, self.out_ann,
                  #          [0, [normalize_time(t) ]])
                  #else:                  
                  # Report the timing normalized.
                  self.put(self.last_samplenum, samplenum, self.out_ann,
                          [0, [normalize_time(t)]])
                  
                  self.put(self.last_samplenum, samplenum, self.out_ann,
                          [1, [normalize_time(sum(self.last_n)/len(self.last_n))]])

                # Store data for next round.

                self.last_samplenum = samplenum
                self.oldpin = pin