installer.sh

#!/bin/sh

osname="$(lsb_release -c -s)"

if [ -z "$DISPLAY" ] && [ "$(fgconsole)" -eq 1 ]; then
    echo "Please switch TTY to something other than 1."
    exit
fi

nc -z gnu.org 80
if [ "$?" -ne 0 ]; then
    echo "No internet connection detected, if you rebooted and chornyd is not running,"
    echo "please make sure the date is correct."
    exit
fi

if [ "$osname" != "void" -o "$osname" != "buster" ]; then
    echo "You need to be running on a Void Linux or a Debian Buster system."
    exit
fi

if [ "$(whoami)" != "root" ]; then
    echo "This script needs to be ran as root."
    exit
fi

read -p "What hostname should the robot have? " hostname
hostname=${hostname:-voidbot}

wirelessDrivers=0
while true; do read -p "Do you wish to install wireless drivers?" yn 
case $yn in
        [Yy]* ) wirelessDrivers=1; break;;
        [Nn]* ) wirelessDrivers=0; break;;
        * ) echo "Please enter Yes or No.";;
    esac
done

installX11=0
while true; do read -p "Do you wish to install a graphical enviroment?" yn 
case $yn in
        [Yy]* ) installX11=1; break;;
        [Nn]* ) installX11=0; break;;
        * ) echo "Please enter Yes or No.";;
    esac
done

experimentalVideo=0
if [ "$installX11" -eq 1 ]
    while true; do read -p "Do you wish to enable the experimental desktop GL driver?" yn 
    case $yn in
            [Yy]* ) installX11=1; break;;
            [Nn]* ) installX11=0; break;;
            * ) echo "Please enter Yes or No.";;
        esac
    done
fi

say() {
    printf "\033[0;34m :: \033[0m%s\n" "$1"
}

# INSTALL

# System update

say "Updating system"
if [ "$osname" != "void" ]; then
    xbps-install -S
    xbps-install -uy xbps
    xbps-install -Suy
    xbps-install -y wget
else
    apt update
    apt upgrade -y
    apt install -y wget
fi

# RPi kernel

if [ "$osname" != "void" ]; then
    say "Installing the RPi kernel"
    xbps-install -Sy rpi-base
fi

# Install chrony

if [ "$osname" != "void" ]; then
    say "Installing chrony"
    xbps-install -Sy chrony

    ln -s /etc/sv/chrony /var/service
    sv start chrony
fi

# Hostname setup

say "Setting up hostname"
echo "$hostname" > /etc/hostname

# Wireless drivers

if [ "$wirelessDrivers" -eq 1 ]; then
    say "Installing wireless drivers"
    curl -L http://downloads.fars-robotics.net/wifi-drivers/install-wifi -o /usr/bin/install-wifi
    chmod +x /usr/bin/install-wifi
    install-wifi
fi

# Enable RNG

if [ "$osname" != "void" ]; then
    say "Enabling RNG"
    xbps-install -Sy rng-tools
    ln -s /etc/sv/rngd /etc/service
    sv start rngd
fi

# Enable ssh

say "Enabling ssh"
if [ "$osname" != "void" ]; then
    xbps-install -Sy openssh
    ln -s /etc/sv/sshd /var/service
else
    apt install openssh -y
    systemctl enable sshd
fi
sed -i 's/#PermitRootLogin prohibit-password/PermitRootLogin yes/g' /etc/ssh/sshd_config
if [ "$osname" != "void" ]; then
    sv start sshd
else
    systemctl start sshd
fi

# Install python

say "Installing python"

if [ "$osname" != "void" ]; then
    xbps-install -Sy python3 python3-pip base-devel python3-devel git
    export CFLAGS=-fcommon
    pip3 install RPi.GPIO
    export CFLAGS=
else
    apt install python3 python3-pip build-essential git -y
fi

# Install pigpio

say "Installing pigpio"

if [ "$osname" != "void" ]; then
    mkdir -p /root/.local/src
    git clone --depth 1 https://github.com/joan2937/pigpio /root/.local/src/pigpio
    cd /root/.local/src/pigpio
    make -j$(nproc)
    make install
    cd /root

    mkdir /etc/sv/pigpiod
    cat<<EOF > /etc/sv/dripd/run
#!/bin/sh

exec /usr/local/bin/pigpiod -g 2>&1
EOF

    chmod +x /etc/sv/pigpiod/run
    ln -s /etc/sv/pigpiod /var/service
    sv start pigpiod
else
    sudo apt install pigpio python3-pigpio -y
    systemctl enable pigpiod
    systemctl start pigpiod
fi

# Enable I2C

say "Enabling I2C"

if [ "$osname" != "void" ]; then
    echo 'device_tree_param=i2c_arm=on' >> /boot/config.txt
    sed '1 s/$/ bcm2708.vc_i2c_override=1/' /boot/cmdline.txt

    mkdir -p /etc/modules-load.d
    echo 'i2c-dev' > /etc/modules-load.d/00-i2c.conf
else
    echo "Since you are not using Void, you need to do this step manually."
    echo "Press [ENTER] to continue."
    read
    raspi-config
fi

# Install I2C tools

say "Installing I2C tools."
if [ "$osname" != "void" ]; then
    xbps-install -Sy i2c-tools
else
    apt install -y i2c-tools
fi

# Get Drip

say "Getting Drip server"
if [ "$osname" != "void" ]; then
    xbps-install -Sy git neovim
else
    apt install -y git neovim
fi
git clone --depth 1 https://git.xslendi.xyz/xSlendiX/DripServer.git /root/DripServer

echo "You now need to configure Drip. Opening in vim."
echo "Press [ENTER] to continue."
vim /root/DripServer/config.py

# Install Drip

say "Installing Drip server as a service"

if [ "$osname" != "void" ]; then
    mkdir /etc/sv/dripd
    cat<<EOF > /etc/sv/dripd/run
#!/bin/sh

cd /root/DripServer
exec ./app.py 2>&1
EOF

    chmod +x /etc/sv/dripd/run
    ln -s /etc/sv/dripd /var/service
else
    cat<<EOF > /etc/systemd/system/dripd.service
[Unit]
Description=Drip server system service
After=pigpiod.service

[Service]
Type=simple
Restart=always
RestartSec=1
User=root
WorkingDirectory=/root/DripServer
ExecStart=python3 ./app.py

[Install]
WantedBy=multi-user.target

EOF

    systemctl enable dripd.service
    systemctl start dripd.service
fi

# Installing debugging tools

if [ "$osname" != "void" ]; then
    xbps-install -Sy xtools htop
else
    apt install -y htop
fi

# Autologin

say "Configuring autologin"

if [ "$osname" != "void" ]; then
    cp -R /etc/sv/agetty-tty1 /etc/sv/agetty-autologin-tty1
    sed -i 's/GETTY_ARGS="--noclear"/GETTY_ARGS="--autologin root --noclear"/g' /etc/sv/agetty-autologin-tty1/conf
    rm /var/service/agetty-tty1
    ln -s /etc/sv/agetty-autologin-tty1 /var/service
else
    mkdir -p /etc/systemd/getty\@tty1.service.d/
    cat<<EOF > /etc/systemd/getty\@tty1.service.d/autologin.conf
[Service]
ExecStart=
ExecStart=-/sbin/agetty --autologin pi --noclear %I 38400 linux
EOF

    systemctl enable [email protected]
fi

chsh -s /bin/bash root

say "Disabling boot-slowing options"
cat << EOF >> /boot/config.txt

disable_spash=1
dtoverlay=disable-bt
boot_delay=0

EOF

# X11

if [ "$installX11" -eq 1 ]; then

    if [ "$osname" != "void" ]; then
        say "Installing drivers"
        xbps-install -Sy mesa-dri 
    fi
    
    say "Installing xorg"
    if [ "$osname" != "void" ]; then
        xbps-install -Sy xorg xinit harfbuzz-devel libXft-devel libXinerama-devel
    else
        apt install -y xorg xinit harfbuzz-dev libxft-dev libxinerama-dev libx11-dev
    fi

    say "Installing dmenu"
    if [ "$osname" != "void" ]; then
        xbps-install -Sy dmenu
    else
        apt install -y dmenu
    fi

    say "Installing st"
    cd /root/.local/src
    git clone --depth 1 https://git.xslendi.xyz/xSlendiX/st.git
    cd st
    make -j4
    make install
    cd ..

    say "Installing dwm"
    git clone --depth 1 https://git.xslendi.xyz/xSlendiX/dwm.git
    cd dwm
    make -j4
    make install
    cd /root

    say "Creating xinitrc"
    cat << EOF > /root/.xinitrc
#!/bin/sh

start-pipewire &

dwm

EOF

    say "Installing dbus and rtkit"
    if [ "$osname" != "void" ]; then
        xbps-install -Sy dbus rtkit
        ln -sf /etc/sv/dbus /var/service harfbuzz-devel
        ln -sf /etc/sv/rtkit /var/service
        sv start dbus rtkit
    else
        apt install dbus rtkit
        systemctl enable dbus rtkit
        systemctl start dbus rtkit
    fi

    say "Enabling audio sound chip"
    sed -i 's/#dtparam=audio=on/dtparam=audio=on/g' /boot/config.txt

    if [ experimentalVideo -eq 1 ]; then
        say "Enabling experimental desktop GL driver"
        sed -i 's/#dtoverlay=vc4-kms-v3d/dtoverlay=vc4-kms-v3d/g' /boot/config.txt
    fi

    cat << EOF > /root/.profile
#!/bin/sh
    
if [ -z "\$DISPLAY" ] && [ "\$(fgconsole)" -eq 1 ]; then
    exec startx
fi

EOF
    chmod a+x /root/.profile

    say "Installing pipewire"
    if [ "$osname" != "void" ]; then
        xbps-install -Sy pipewire pavucontrol pulseaudio-utils
    else
        apt install -y pipewire pavucontrol pulseaudio-utils
    fi

    say "Creating pipewire startup script"
    cat<<EOF > /usr/local/bin/start-pipewire
#!/bin/sh

pgrep -x pipewire > /dev/null || pipewire &
pgrep -x pipewire-pulse > /dev/null || pipewire-pulse &

EOF
    chmod a+x /usr/local/bin/start-pipewire

fi

say "Installation finished. After reboot please run `i2c-detect` to make sure everything installed properly."