SoapySDR install script for raspberry PI

install-soapysdr.sh

# Building CubicSDR for Linux
# This script will successfully build CubicSDR under Debian Jessie on the Raspberry Pi3.
# Adapted from https://github.com/cjcliffe/CubicSDR/wiki/Build-Linux
# Larry Dighera June 7, 2016
# [email protected]

# songritk Mar 24,2018

sudo apt-get install -y git build-essential automake cmake
sudo apt-get install -y libpulse-dev libgtk-3-dev
sudo apt-get install -y freeglut3 freeglut3-dev
sudo apt-get install -y libjpeg-dev libtiff-dev \
	libsdl1.2-dev libgstreamer-plugins-base0.10-dev \
	libgstreamer-plugins-base1.0-dev \
	libnotify-dev freeglut3 freeglut3-dev libsm-dev \
	libwebkitgtk-dev libwebkitgtk-3.0-dev libwebkit2gtk-4.0-dev \
	libxtst-dev
sudo apt-get install -y git-core
sudo apt-get install -y libusb-1.0-0-dev

sudo echo "deb http://archive.raspbian.org/raspbian jessie main" > /etc/apt/sources.list.d/gnuradio.list
sudo apt update -y
sudo apt upgrade -y

cat <<EOF >no-rtl.conf
blacklist dvb_usb_rtl28xxu
blacklist rtl2832
blacklist rtl2830
EOF

sudo mv no-rtl.conf /etc/modprobe.d/
cd 
git clone git://git.osmocom.org/rtl-sdr.git
cd rtl-sdr
mkdir build
cd build
cmake ../ -DINSTALL_UDEV_RULES=ON -DDETACH_KERNEL_DRIVER=ON
make
sudo make install
sudo ldconfig
cd ~
sudo cp ./rtl-sdr/rtl-sdr.rules /etc/udev/rules.d/
sudo apt-get install -y libasound-dev
sudo apt-get install -y libpulse-dev
sudo apt-get install -y gnuradio gnuradio-dev

mkdir cubicsdr && cd cubicsdr
git clone https://github.com/pothosware/SoapySDR.git
cd SoapySDR
mkdir build && cd build
cmake ../ -DCMAKE_BUILD_TYPE=Release
make -j4
sudo make install
ldconfig
SoapySDRUtil --info #test SoapySDR install
cd ..
git clone https://github.com/jgaeddert/liquid-dsp
cd liquid-dsp
./bootstrap.sh
./configure --enable-fftoverride 
make -j4
sudo make install
ldconfig
cd ..
wget https://github.com/wxWidgets/wxWidgets/releases/download/v3.1.0/wxWidgets-3.1.0.tar.bz2
tar -xvjf wxWidgets-3.1.0.tar.bz2  
cd wxWidgets-3.1.0/
sudo mkdir -p /opt/wxWidgets-staticlib
./autogen.sh 
./configure --with-opengl --disable-shared --enable-monolithic --with-libjpeg --with-libtiff --with-libpng --with-zlib --disable-sdltest --enable-unicode --enable-display --enable-propgrid --disable-webkit --disable-webview --disable-webviewwebkit --prefix=`echo /opt/wxWidgets-staticlib` CXXFLAGS="-std=c++0x" --with-libiconv=/usr
make -j4 && sudo make install
cd ..
apt-get install -y libhamlib2 libhamlib-utils libhamlib++-dev libhamlib-dev libhamlib-doc python-libhamlib2

git clone https://github.com/cjcliffe/CubicSDR.git
cd CubicSDR
mkdir build && cd build
cmake ../ -DUSE_HAMLIB=1 -DCMAKE_BUILD_TYPE=Release -DwxWidgets_CONFIG_EXECUTABLE=/opt/wxWidgets-staticlib/bin/wx-config
make
cd x86/
./CubicSDR
sudo make install
cd ..
git clone https://github.com/pothosware/SoapyRTLSDR.git
cd SoapyRTLSDR
cd build
cmake .. -DCMAKE_BUILD_TYPE=Release
make
sudo make install
ldconfig
SoapySDRUtil --probe     

in line 78 the cmake command is missing.
Thanks for making this script, it saves a lot of time.

lol ... 2 times I ran it unattended... 2 times I got an error ... then I examined the script and wondered about line 78 .. ouch.. thx, you poined it out!

also this script tries to build for x86 somewhere... obvisiously won't work for a rasperry pi ... (also there are multipl missing "sudo make install" (Ln 53, 62 & 71))

none the less, great script.to get started! thx @songritk

main point for this script: it installs all dependencies which are needed for other great HAM-projects, like linhpsdr, etc ... mainly the gtk-part ...

note: this is for rasbian jessie , update 4 buster / ... plz.. example below:
@21 change jessie to buster (or even bullseye)
@53 sudo make install (for Raspberr Pi / RPi)
@55 maybe move to end of file or make it interactive with user promt to show info yes/no
@62 sudo make install
@65-67 by now its version 3.1.4 (just replace the numbers)
@70 check the configuring options ...
@71 sudo make install
@73 sudo apt ...
@80 check architecture, make sure you are on x86, armhf, etc..
@81 maybe move to end for testing .. or make promt to user

happy greetz from germany,

3NK1/34 -- Marcus -- fallenangel3k (Anno Covid 2020)

BUMP

INFO: See the following pages...
https://github.com/cjcliffe/CubicSDR/wiki/Build-Linux

INFO #2: Updated this script for building on Raspberry Pi Zero..
https://gist.github.com/fallenangel3k/ca8ee7dc8cee84c3ee03a4eb6142d13c