-
-
Save sonulgupta/4c1806dd702cb84fce3b9eddcd0b4d06 to your computer and use it in GitHub Desktop.
Arduino_Port_Expander with Mage_2560
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| // Must disable logging if using logging in main.cpp or in other custom components for the | |
| // __c causes a section type conflict with __c thingy | |
| // you can enable logging and use it if you enable this in logger: | |
| /* | |
| logger: | |
| level: DEBUG | |
| esp8266_store_log_strings_in_flash: False | |
| */ | |
| //#define APE_LOGGING | |
| // take advantage of LOG_ defines to decide which code to include | |
| #ifdef LOG_BINARY_OUTPUT | |
| #define APE_BINARY_OUTPUT | |
| #endif | |
| #ifdef LOG_BINARY_SENSOR | |
| #define APE_BINARY_SENSOR | |
| #endif | |
| #ifdef LOG_SENSOR | |
| #define APE_SENSOR | |
| #endif | |
| static const char *TAGape = "ape"; | |
| #define APE_CMD_DIGITAL_READ 0 | |
| #define APE_CMD_WRITE_ANALOG 2 | |
| #define APE_CMD_WRITE_DIGITAL_HIGH 3 | |
| #define APE_CMD_WRITE_DIGITAL_LOW 4 | |
| #define APE_CMD_SETUP_PIN_OUTPUT 5 | |
| #define APE_CMD_SETUP_PIN_INPUT_PULLUP 6 | |
| #define APE_CMD_SETUP_PIN_INPUT 7 | |
| // 16 analog registers.. A0 to A15 | |
| // A4 and A5 on Arduino Uno not supported due to I2C | |
| #define CMD_ANALOG_READ_A0 0b1000 // 0x8 = A0 | |
| // .... | |
| #define CMD_ANALOG_READ_A15 10111 // 17 = A15 | |
| #define CMD_SETUP_ANALOG_INTERNAL 0x10 | |
| #define CMD_SETUP_ANALOG_DEFAULT 0x11 | |
| #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0)) | |
| #define ape_binary_output(ape, pin) get_ape(ape)->get_binary_output(pin) | |
| #define ape_binary_sensor(ape, pin) get_ape(ape)->get_binary_sensor(pin) | |
| #define ape_analog_input(ape, pin) get_ape(ape)->get_analog_input(pin) | |
| class ArduinoPortExpander; | |
| using namespace esphome; | |
| #ifdef APE_BINARY_OUTPUT | |
| class ApeBinaryOutput : public output::BinaryOutput | |
| { | |
| public: | |
| ApeBinaryOutput(ArduinoPortExpander *parent, uint8_t pin) | |
| { | |
| this->parent_ = parent; | |
| this->pin_ = pin; | |
| } | |
| void write_state(bool state) override; | |
| uint8_t get_pin() { return this->pin_; } | |
| protected: | |
| ArduinoPortExpander *parent_; | |
| uint8_t pin_; | |
| // Pins are setup as output after the state is written, Arduino has no open drain outputs, after setting an output it will either sink or source thus activating outputs writen to false during a flick. | |
| bool setup_{true}; | |
| bool state_{false}; | |
| friend class ArduinoPortExpander; | |
| }; | |
| #endif | |
| #ifdef APE_BINARY_SENSOR | |
| class ApeBinarySensor : public binary_sensor::BinarySensor | |
| { | |
| public: | |
| ApeBinarySensor(ArduinoPortExpander *parent, uint8_t pin) | |
| { | |
| this->pin_ = pin; | |
| } | |
| uint8_t get_pin() { return this->pin_; } | |
| protected: | |
| uint8_t pin_; | |
| }; | |
| #endif | |
| #ifdef APE_SENSOR | |
| class ApeAnalogInput : public sensor::Sensor | |
| { | |
| public: | |
| ApeAnalogInput(ArduinoPortExpander *parent, uint8_t pin) | |
| { | |
| this->pin_ = pin; | |
| } | |
| uint8_t get_pin() { return this->pin_; } | |
| protected: | |
| uint8_t pin_; | |
| }; | |
| #endif | |
| class ArduinoPortExpander : public Component, public I2CDevice | |
| { | |
| public: | |
| static ArduinoPortExpander *instance; // Add this line! | |
| ArduinoPortExpander(I2CBus *bus, uint8_t address, bool vref_default = false) | |
| { | |
| instance = this; // Add this line! | |
| set_i2c_address(address); | |
| set_i2c_bus(bus); | |
| this->vref_default_ = vref_default; | |
| } | |
| void setup() override | |
| { | |
| #ifdef APE_LOGGING | |
| ESP_LOGCONFIG(TAGape, "Setting up ArduinoPortExpander at %#02x ...", address_); | |
| #endif | |
| /* We cannot setup as usual as arduino boots later than esp8266 | |
| Poll i2c bus for our Arduino for a n seconds instead of failing fast, | |
| also this is important as pin setup (INPUT_PULLUP, OUTPUT it's done once) | |
| */ | |
| this->configure_timeout_ = millis() + 5000; | |
| } | |
| void loop() override | |
| { | |
| if (millis() < this->configure_timeout_) | |
| { | |
| bool try_configure = millis() % 100 > 50; | |
| if (try_configure == this->configure_) | |
| return; | |
| this->configure_ = try_configure; | |
| if (ERROR_OK == this->read_register(APE_CMD_DIGITAL_READ, const_cast<uint8_t *>(this->read_buffer_), 9)) //changed 3 to 9 | |
| { | |
| #ifdef APE_LOGGING | |
| ESP_LOGCONFIG(TAGape, "ArduinoPortExpander found at %#02x", address_); | |
| #endif | |
| delay(10); | |
| if (this->vref_default_) | |
| { | |
| this->write_register(CMD_SETUP_ANALOG_DEFAULT, nullptr, 0); // 0: unused | |
| } | |
| // Config success | |
| this->configure_timeout_ = 0; | |
| this->status_clear_error(); | |
| #ifdef APE_BINARY_SENSOR | |
| for (ApeBinarySensor *pin : this->input_pins_) | |
| { | |
| App.feed_wdt(); | |
| uint8_t pinNo = pin->get_pin(); | |
| #ifdef APE_LOGGING | |
| ESP_LOGCONFIG(TAGape, "Setup input pin %d", pinNo); | |
| #endif | |
| this->write_register(APE_CMD_SETUP_PIN_INPUT_PULLUP, &pinNo, 1); | |
| delay(20); | |
| } | |
| #endif | |
| #ifdef APE_BINARY_OUTPUT | |
| for (ApeBinaryOutput *output : this->output_pins_) | |
| { | |
| if (!output->setup_) | |
| { // this output has a valid value already | |
| this->write_state(output->pin_, output->state_, true); | |
| App.feed_wdt(); | |
| delay(20); | |
| } | |
| } | |
| #endif | |
| #ifdef APE_SENSOR | |
| for (ApeAnalogInput *sensor : this->analog_pins_) | |
| { | |
| App.feed_wdt(); | |
| uint8_t pinNo = sensor->get_pin(); | |
| #ifdef APE_LOGGING | |
| ESP_LOGCONFIG(TAGape, "Setup analog input pin %d", pinNo); | |
| #endif | |
| this->write_register(APE_CMD_SETUP_PIN_INPUT, &pinNo, 1); | |
| delay(20); | |
| } | |
| #endif | |
| return; | |
| } | |
| // Still not answering | |
| return; | |
| } | |
| if (this->configure_timeout_ != 0 && millis() > this->configure_timeout_) | |
| { | |
| #ifdef APE_LOGGING | |
| ESP_LOGE(TAGape, "ArduinoPortExpander NOT found at %#02x", address_); | |
| #endif | |
| this->mark_failed(); | |
| return; | |
| } | |
| #ifdef APE_BINARY_SENSOR | |
| if (ERROR_OK != this->read_register(APE_CMD_DIGITAL_READ, const_cast<uint8_t *>(this->read_buffer_), 9)) //Changed this from 3 to 9 | |
| { | |
| #ifdef APE_LOGGING | |
| ESP_LOGE(TAGape, "Error reading. Reconfiguring pending."); | |
| #endif | |
| this->status_set_error(); | |
| this->configure_timeout_ = millis() + 5000; | |
| return; | |
| } | |
| for (ApeBinarySensor *pin : this->input_pins_) | |
| { | |
| uint8_t pinNo = pin->get_pin(); | |
| uint8_t bit = pinNo % 8; | |
| uint8_t value = 0; | |
| if(pinNo < 8){ | |
| value = this->read_buffer_[0]; | |
| }else if(pinNo < 16){ | |
| value = this->read_buffer_[1]; | |
| }else if(pinNo < 24){ | |
| value = this->read_buffer_[2]; | |
| }else if(pinNo < 32){ | |
| value = this->read_buffer_[3]; | |
| }else if(pinNo < 40){ | |
| value = this->read_buffer_[4]; | |
| }else if(pinNo < 48){ | |
| value = this->read_buffer_[5]; | |
| }else if(pinNo < 56){ | |
| value = this->read_buffer_[6]; | |
| }else if(pinNo < 64){ | |
| value = this->read_buffer_[7]; | |
| }else{ | |
| value = this->read_buffer_[8]; | |
| } | |
| bool ret = value & (1 << bit); | |
| if (this->initial_state_) | |
| pin->publish_initial_state(ret); | |
| else | |
| pin->publish_state(ret); | |
| } | |
| #endif | |
| #ifdef APE_SENSOR | |
| for (ApeAnalogInput *pin : this->analog_pins_) | |
| { | |
| uint8_t pinNo = pin->get_pin(); | |
| pin->publish_state(analogRead(pinNo)); | |
| } | |
| #endif | |
| this->initial_state_ = false; | |
| } | |
| #ifdef APE_SENSOR | |
| uint16_t analogRead(uint8_t pin) | |
| { | |
| bool ok = (ERROR_OK == this->read_register((uint8_t)(CMD_ANALOG_READ_A0 + pin), const_cast<uint8_t *>(this->read_buffer_), 2)); | |
| #ifdef APE_LOGGING | |
| ESP_LOGVV(TAGape, "analog read pin: %d ok: %d byte0: %d byte1: %d", pin, ok, this->read_buffer_[0], this->read_buffer_[1]); | |
| #endif | |
| uint16_t value = this->read_buffer_[0] | ((uint16_t)this->read_buffer_[1] << 8); | |
| return value; | |
| } | |
| #endif | |
| #ifdef APE_BINARY_OUTPUT | |
| output::BinaryOutput *get_binary_output(uint8_t pin) | |
| { | |
| ApeBinaryOutput *output = new ApeBinaryOutput(this, pin); | |
| output_pins_.push_back(output); | |
| return output; | |
| } | |
| #endif | |
| #ifdef APE_BINARY_SENSOR | |
| binary_sensor::BinarySensor *get_binary_sensor(uint8_t pin) | |
| { | |
| ApeBinarySensor *binarySensor = new ApeBinarySensor(this, pin); | |
| input_pins_.push_back(binarySensor); | |
| return binarySensor; | |
| } | |
| #endif | |
| #ifdef APE_SENSOR | |
| sensor::Sensor *get_analog_input(uint8_t pin) | |
| { | |
| ApeAnalogInput *input = new ApeAnalogInput(this, pin); | |
| analog_pins_.push_back(input); | |
| return input; | |
| } | |
| #endif | |
| void write_state(uint8_t pin, bool state, bool setup = false) | |
| { | |
| if (this->configure_timeout_ != 0) | |
| return; | |
| #ifdef APE_LOGGING | |
| ESP_LOGD(TAGape, "Writing %d to pin %d", state, pin); | |
| #endif | |
| this->write_register(state ? APE_CMD_WRITE_DIGITAL_HIGH : APE_CMD_WRITE_DIGITAL_LOW, &pin, 1); | |
| if (setup) | |
| { | |
| App.feed_wdt(); | |
| delay(20); | |
| #ifdef APE_LOGGING | |
| ESP_LOGI(TAGape, "Setup output pin %d", pin); | |
| #endif | |
| this->write_register(APE_CMD_SETUP_PIN_OUTPUT, &pin, 1); | |
| } | |
| } | |
| protected: | |
| bool configure_{true}; | |
| bool initial_state_{true}; | |
| uint8_t read_buffer_[9]{0, 0, 0, 0, 0, 0, 0, 0, 0}; //changed from [3]{0, 0, 0} | |
| unsigned long configure_timeout_{5000}; | |
| bool vref_default_{false}; | |
| #ifdef APE_BINARY_OUTPUT | |
| std::vector<ApeBinaryOutput *> output_pins_; | |
| #endif | |
| #ifdef APE_BINARY_SENSOR | |
| std::vector<ApeBinarySensor *> input_pins_; | |
| #endif | |
| #ifdef APE_SENSOR | |
| std::vector<ApeAnalogInput *> analog_pins_; | |
| #endif | |
| }; | |
| #ifdef APE_BINARY_OUTPUT | |
| void ApeBinaryOutput::write_state(bool state) | |
| { | |
| this->state_ = state; | |
| this->parent_->write_state(this->pin_, state, this->setup_); | |
| this->setup_ = false; | |
| } | |
| #endif | |
| ArduinoPortExpander *ArduinoPortExpander::instance = nullptr; |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| esphome: | |
| name: xxxxxxxxxx | |
| friendly_name: xxxxxxxxx | |
| includes: | |
| - arduino_port_expander.h | |
| esp32: | |
| board: esp32-s3-devkitc-1 | |
| framework: | |
| type: arduino | |
| # Enable logging | |
| logger: | |
| level: DEBUG | |
| # Enable Home Assistant API | |
| api: | |
| encryption: | |
| key: "xxxxxxxxx" | |
| ota: | |
| - platform: esphome | |
| password: "xxxxxxxxx" | |
| ethernet: | |
| type: W5500 | |
| clk_pin: GPIO13 | |
| mosi_pin: GPIO11 | |
| miso_pin: GPIO12 | |
| cs_pin: GPIO14 | |
| interrupt_pin: GPIO10 | |
| reset_pin: GPIO09 | |
| manual_ip: | |
| static_ip: 192.168.0.127 | |
| gateway: 192.168.0.1 | |
| subnet: 255.255.255.0 | |
| modbus: | |
| id: modbus1 | |
| uart_id: mbus | |
| i2c: | |
| - id: i2c_component | |
| sda: 34 | |
| scl: 33 | |
| scan: true | |
| external_components: | |
| - source: | |
| type: git | |
| url: https://github.com/robertklep/esphome-custom-component | |
| components: [ custom, custom_component ] | |
| custom_component: | |
| - lambda: |- | |
| auto ape = new ArduinoPortExpander(id(i2c_component), 0x08); | |
| return {ape}; | |
| id: expander1 | |
| output: | |
| - platform: custom | |
| type: binary | |
| lambda: |- | |
| return []() -> std::vector<esphome::output::BinaryOutput*> { | |
| auto *exp = ArduinoPortExpander::instance; | |
| if (exp == nullptr) return {}; | |
| return { | |
| exp->get_binary_output(47), exp->get_binary_output(48), | |
| exp->get_binary_output(49), exp->get_binary_output(50), | |
| exp->get_binary_output(51), exp->get_binary_output(52), | |
| exp->get_binary_output(13)}; | |
| }(); | |
| outputs: | |
| - id: relay_1 | |
| inverted: true | |
| - id: relay_2 | |
| inverted: true | |
| - id: relay_3 | |
| inverted: true | |
| - id: relay_4 | |
| inverted: true | |
| - id: relay_5 | |
| inverted: true | |
| - id: relay_6 | |
| inverted: true | |
| - id: relay_7 | |
| inverted: true | |
| switch: | |
| - platform: output | |
| name: "xxxxxxxxx" | |
| output: relay_1 | |
| - platform: output | |
| name: "xxxxxxxxx" | |
| output: relay_2 | |
| - platform: output | |
| name: "xxxxxxxxx" | |
| output: relay_3 | |
| - platform: output | |
| name: "xxxxxxxxx" | |
| output: relay_4 | |
| - platform: output | |
| name: "xxxxxxxxx" | |
| output: relay_5 | |
| - platform: output | |
| name: "xxxxxxxxx" | |
| output: relay_6 | |
| - platform: output | |
| name: "xxxxxxxxx" | |
| output: relay_7 | |
| binary_sensor: | |
| - platform: custom | |
| lambda: |- | |
| return []() -> std::vector<binary_sensor::BinarySensor*> { | |
| auto *exp = ArduinoPortExpander::instance; | |
| if (exp == nullptr) return {}; | |
| return { | |
| exp->get_binary_sensor(0), exp->get_binary_sensor(1), exp->get_binary_sensor(2), | |
| exp->get_binary_sensor(3), exp->get_binary_sensor(4), exp->get_binary_sensor(5), | |
| exp->get_binary_sensor(6), exp->get_binary_sensor(7), exp->get_binary_sensor(8), | |
| exp->get_binary_sensor(9), exp->get_binary_sensor(10), exp->get_binary_sensor(11), | |
| exp->get_binary_sensor(12), exp->get_binary_sensor(14), exp->get_binary_sensor(15), | |
| exp->get_binary_sensor(16), exp->get_binary_sensor(17), exp->get_binary_sensor(18), | |
| exp->get_binary_sensor(19), exp->get_binary_sensor(22), exp->get_binary_sensor(23), | |
| exp->get_binary_sensor(24), exp->get_binary_sensor(25), exp->get_binary_sensor(26), | |
| exp->get_binary_sensor(27), exp->get_binary_sensor(28), exp->get_binary_sensor(29), | |
| exp->get_binary_sensor(30), exp->get_binary_sensor(31), exp->get_binary_sensor(32), | |
| exp->get_binary_sensor(33), exp->get_binary_sensor(34), exp->get_binary_sensor(35), | |
| exp->get_binary_sensor(36), exp->get_binary_sensor(37), exp->get_binary_sensor(38), | |
| exp->get_binary_sensor(39), exp->get_binary_sensor(40), exp->get_binary_sensor(41), | |
| exp->get_binary_sensor(42), exp->get_binary_sensor(43), exp->get_binary_sensor(44), | |
| exp->get_binary_sensor(45), exp->get_binary_sensor(46), exp->get_binary_sensor(53)}; | |
| }(); | |
| binary_sensors: | |
| - id: spare1 | |
| name: "spare switch1" | |
| trigger_on_initial_state: true | |
| filters: | |
| - invert: | |
| on_state: | |
| then: | |
| - logger.log: "Spare Swith1 Active" | |
| #- light.toggle: light | |
| - id: spare2 | |
| name: "spare switch2" | |
| trigger_on_initial_state: true | |
| filters: | |
| - invert: | |
| on_state: | |
| then: | |
| - logger.log: "Spare Swith2 Active" | |
| #- light.toggle: light | |
| - id: spare3 | |
| name: "spare switch3" | |
| trigger_on_initial_state: true | |
| filters: | |
| - invert: | |
| on_state: | |
| then: | |
| - logger.log: "Spare Swith3 Active" | |
| #- light.toggle: light | |
| - id: spare4 | |
| name: "spare switch4" | |
| trigger_on_initial_state: true | |
| filters: | |
| - invert: | |
| on_state: | |
| then: | |
| - logger.log: "Spare Swith4 Active" | |
| #- light.toggle: light | |
| - id: spare5 | |
| name: "spare switch5" | |
| trigger_on_initial_state: true | |
| filters: | |
| - invert: | |
| on_state: | |
| then: | |
| - logger.log: "Spare Swith5 Active" | |
| #- light.toggle: light | |
| - id: spare6 | |
| name: "spare switch6" | |
| trigger_on_initial_state: true | |
| filters: | |
| - invert: | |
| on_state: | |
| then: | |
| - logger.log: "Spare Swith6 Active" | |
| #- light.toggle: light | |
| - id: spare7 | |
| name: "spare switch7" | |
| trigger_on_initial_state: true | |
| filters: | |
| - invert: | |
| on_state: | |
| then: | |
| - logger.log: "Spare Swith7 Active" | |
| #- light.toggle: light | |
| - id: spare8 | |
| name: "spare switch8" | |
| trigger_on_initial_state: true | |
| filters: | |
| - invert: | |
| on_state: | |
| then: | |
| - logger.log: "Spare Swith8 Active" | |
| #- light.toggle: light | |
| - id: spare9 | |
| name: "spare switch9" | |
| trigger_on_initial_state: true | |
| filters: | |
| - invert: | |
| on_state: | |
| then: | |
| - logger.log: "Spare Swith9 Active" | |
| #- light.toggle: light | |
| #(Continue as per your pin requirement) | |
| # define analog sensors | |
| sensor: | |
| - platform: custom | |
| lambda: |- | |
| return []() -> std::vector<sensor::Sensor*> { | |
| auto *exp = ArduinoPortExpander::instance; | |
| if (exp == nullptr) return {}; | |
| return { | |
| exp->get_analog_input(54), exp->get_analog_input(55), | |
| exp->get_analog_input(56), exp->get_analog_input(57), | |
| exp->get_analog_input(58), exp->get_analog_input(59), | |
| exp->get_analog_input(60), exp->get_analog_input(61), | |
| exp->get_analog_input(62), exp->get_analog_input(63), | |
| exp->get_analog_input(64), exp->get_analog_input(65), | |
| exp->get_analog_input(66), exp->get_analog_input(67), | |
| exp->get_analog_input(68), exp->get_analog_input(69)}; | |
| }(); | |
| sensors: | |
| - name: "Analog Voltage-1" | |
| filters: | |
| - throttle: 60s | |
| - lambda: | |
| if (x >= 3.11) { | |
| return x * 1.60256; | |
| } else if (x <= 0.15) { | |
| return 0; | |
| } else { | |
| return x * 1.51; | |
| } | |
| - name: "Analog Voltage-2" | |
| #attenuation: 11db | |
| filters: | |
| - throttle: 60s | |
| - lambda: | |
| if (x >= 3.11) { | |
| return x * 1.60256; | |
| } else if (x <= 0.15) { | |
| return 0; | |
| } else { | |
| return x * 1.51; | |
| } | |
| - name: "Analog Voltage-3" | |
| filters: | |
| - throttle: 60s | |
| - lambda: | |
| if (x >= 3.11) { | |
| return x * 1.60256; | |
| } else if (x <= 0.15) { | |
| return 0; | |
| } else { | |
| return x * 1.51; | |
| } | |
| - name: "Analog Voltage-4" | |
| filters: | |
| - throttle: 60s | |
| - lambda: | |
| if (x >= 3.11) { | |
| return x * 1.60256; | |
| } else if (x <= 0.15) { | |
| return 0; | |
| } else { | |
| return x * 1.51; | |
| } | |
| - name: "Analog Voltage-5" | |
| filters: | |
| - throttle: 60s | |
| - lambda: | |
| if (x >= 3.11) { | |
| return x * 1.60256; | |
| } else if (x <= 0.15) { | |
| return 0; | |
| } else { | |
| return x * 1.51; | |
| } | |
| - name: "Analog Voltage-6" | |
| filters: | |
| - throttle: 60s | |
| - lambda: | |
| if (x >= 3.11) { | |
| return x * 1.60256; | |
| } else if (x <= 0.15) { | |
| return 0; | |
| } else { | |
| return x * 1.51; | |
| } | |
| - name: "Analog Voltage-7" | |
| filters: | |
| - throttle: 60s | |
| - lambda: | |
| if (x >= 3.11) { | |
| return x * 1.60256; | |
| } else if (x <= 0.15) { | |
| return 0; | |
| } else { | |
| return x * 1.51; | |
| } | |
| - name: "Analog current-1" | |
| unit_of_measurement: mA | |
| filters: | |
| - throttle: 60s | |
| - multiply: 6.66666666 | |
| - name: "Analog current-2" | |
| unit_of_measurement: mA | |
| filters: | |
| - throttle: 60s | |
| - multiply: 6.66666666 | |
| - name: "Analog current-3" | |
| unit_of_measurement: mA | |
| filters: | |
| - throttle: 60s | |
| - multiply: 6.66666666 | |
| - name: "Analog current-4" | |
| unit_of_measurement: mA | |
| filters: | |
| - throttle: 60s | |
| - multiply: 6.66666666 | |
| - name: "Analog current-5" | |
| unit_of_measurement: mA | |
| filters: | |
| - throttle: 60s | |
| - multiply: 6.66666666 | |
| - name: "Analog current-6" | |
| unit_of_measurement: mA | |
| filters: | |
| - throttle: 60s | |
| - multiply: 6.66666666 | |
| - name: "Analog current-7" | |
| unit_of_measurement: mA | |
| filters: | |
| - throttle: 60s | |
| - multiply: 6.66666666 | |
| - name: "Living Room LDR" | |
| id: livingroom_ldr_sensor | |
| unit_of_measurement: "lx" | |
| device_class: "illuminance" | |
| state_class: "measurement" | |
| accuracy_decimals: 1 | |
| filters: | |
| - throttle: 60s | |
| - calibrate_linear: | |
| method: exact | |
| datapoints: | |
| - 10.0 -> 800.0 | |
| - 100.0 -> 600.0 | |
| - 9000.0 -> 50.0 | |
| - 32729.0 -> 30.0 | |
| - name: "BedRoom LDR" | |
| id: bedroom_ldr_sensor | |
| unit_of_measurement: "lx" | |
| device_class: "illuminance" | |
| state_class: "measurement" | |
| accuracy_decimals: 1 | |
| filters: | |
| - throttle: 60s | |
| - calibrate_linear: | |
| method: exact | |
| datapoints: | |
| - 10.0 -> 800.0 | |
| - 100.0 -> 600.0 | |
| - 9000.0 -> 50.0 | |
| - 32729.0 -> 30.0 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Compiling .pioenvs/esp32-rozdzielnia/libd56/ESPAsyncTCP/ESPAsyncTCP.cpp.o
/config/esphome/test.yaml: In lambda function:
/config/esphome/test.yaml:87:42: warning: 'esphome::sensor::Sensor::raw_state' is deprecated: Use get_raw_state() instead of .raw_state. Will be removed in 2026.10.0 [-Wdeprecated-declarations]
87 | int seconds = round(id(uptime_sensor).raw_state);
| ^~~~~~~~~
In file included from src/esphome/core/application.h:46,
from src/esphome/components/api/api_frame_helper.h:14,
from src/esphome/components/api/api_connection.h:5,
from src/esphome.h:4,
from src/main.cpp:3:
src/esphome/components/sensor/sensor.h:144:9: note: declared here
144 | float raw_state;
| ^~~~~~~~~
/config/esphome/test.yaml:87:42: warning: 'esphome::sensor::Sensor::raw_state' is deprecated: Use get_raw_state() instead of .raw_state. Will be removed in 2026.10.0 [-Wdeprecated-declarations]
87 | int seconds = round(id(uptime_sensor).raw_state);
| ^~~~~~~~~
In file included from src/esphome/core/application.h:46,
from src/esphome/components/api/api_frame_helper.h:14,
from src/esphome/components/api/api_connection.h:5,
from src/esphome.h:4,
from src/main.cpp:3:
src/esphome/components/sensor/sensor.h:144:9: note: declared here
144 | float raw_state;
| ^~~~~~~~~
/config/esphome/test.yaml:87:42: warning: 'esphome::sensor::Sensor::raw_state' is deprecated: Use get_raw_state() instead of .raw_state. Will be removed in 2026.10.0 [-Wdeprecated-declarations]
87 | int seconds = round(id(uptime_sensor).raw_state);
| ^~~~~~~~~
In file included from src/esphome/core/application.h:46,
from src/esphome/components/api/api_frame_helper.h:14,
from src/esphome/components/api/api_connection.h:5,
from src/esphome.h:4,
from src/main.cpp:3:
src/esphome/components/sensor/sensor.h:144:9: note: declared here
144 | float raw_state;
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml: In lambda function:
/config/esphome/test.yaml:117:33: error: 'expander1' is not captured
117 | return {ape_binary_output(expander1, 22),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:117:15: note: in expansion of macro 'ape_binary_output'
117 | return {ape_binary_output(expander1, 22),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:175:122: note: the lambda has no capture-default
175 | name: kuchnia
| ^
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:118:33: error: 'expander1' is not captured
118 | ape_binary_output(expander1, 23),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:118:15: note: in expansion of macro 'ape_binary_output'
118 | ape_binary_output(expander1, 23),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:175:122: note: the lambda has no capture-default
175 | name: kuchnia
| ^
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:119:33: error: 'expander1' is not captured
119 | ape_binary_output(expander1, 24),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:119:15: note: in expansion of macro 'ape_binary_output'
119 | ape_binary_output(expander1, 24),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:175:122: note: the lambda has no capture-default
175 | name: kuchnia
| ^
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:120:33: error: 'expander1' is not captured
120 | ape_binary_output(expander1, 25),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:120:15: note: in expansion of macro 'ape_binary_output'
120 | ape_binary_output(expander1, 25),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:175:122: note: the lambda has no capture-default
175 | name: kuchnia
| ^
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:121:33: error: 'expander1' is not captured
121 | ape_binary_output(expander1, 26),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:121:15: note: in expansion of macro 'ape_binary_output'
121 | ape_binary_output(expander1, 26),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:175:122: note: the lambda has no capture-default
175 | name: kuchnia
| ^
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:122:33: error: 'expander1' is not captured
122 | ape_binary_output(expander1, 28),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:122:15: note: in expansion of macro 'ape_binary_output'
122 | ape_binary_output(expander1, 28),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:175:122: note: the lambda has no capture-default
175 | name: kuchnia
| ^
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:123:33: error: 'expander1' is not captured
123 | ape_binary_output(expander1, 30),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:123:15: note: in expansion of macro 'ape_binary_output'
123 | ape_binary_output(expander1, 30),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:175:122: note: the lambda has no capture-default
175 | name: kuchnia
| ^
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:124:33: error: 'expander1' is not captured
124 | ape_binary_output(expander1, 32),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:124:15: note: in expansion of macro 'ape_binary_output'
124 | ape_binary_output(expander1, 32),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:175:122: note: the lambda has no capture-default
175 | name: kuchnia
| ^
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:125:33: error: 'expander1' is not captured
125 | ape_binary_output(expander1, 34),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:125:15: note: in expansion of macro 'ape_binary_output'
125 | ape_binary_output(expander1, 34),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:175:122: note: the lambda has no capture-default
175 | name: kuchnia
| ^
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:126:33: error: 'expander1' is not captured
126 | ape_binary_output(expander1, 35),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:126:15: note: in expansion of macro 'ape_binary_output'
126 | ape_binary_output(expander1, 35),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:175:122: note: the lambda has no capture-default
175 | name: kuchnia
| ^
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:127:33: error: 'expander1' is not captured
127 | ape_binary_output(expander1, 36),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:127:15: note: in expansion of macro 'ape_binary_output'
127 | ape_binary_output(expander1, 36),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:175:122: note: the lambda has no capture-default
175 | name: kuchnia
| ^
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:128:33: error: 'expander1' is not captured
128 | ape_binary_output(expander1, 38),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:128:15: note: in expansion of macro 'ape_binary_output'
128 | ape_binary_output(expander1, 38),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:175:122: note: the lambda has no capture-default
175 | name: kuchnia
| ^
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:129:33: error: 'expander1' is not captured
129 | ape_binary_output(expander1, 39),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:129:15: note: in expansion of macro 'ape_binary_output'
129 | ape_binary_output(expander1, 39),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:175:122: note: the lambda has no capture-default
175 | name: kuchnia
| ^
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:130:33: error: 'expander1' is not captured
130 | ape_binary_output(expander1, 40),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:130:15: note: in expansion of macro 'ape_binary_output'
130 | ape_binary_output(expander1, 40),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:175:122: note: the lambda has no capture-default
175 | name: kuchnia
| ^
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:131:33: error: 'expander1' is not captured
131 | ape_binary_output(expander1, 42),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:131:15: note: in expansion of macro 'ape_binary_output'
131 | ape_binary_output(expander1, 42),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:175:122: note: the lambda has no capture-default
175 | name: kuchnia
| ^
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:132:33: error: 'expander1' is not captured
132 | ape_binary_output(expander1, 44),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:132:15: note: in expansion of macro 'ape_binary_output'
132 | ape_binary_output(expander1, 44),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:175:122: note: the lambda has no capture-default
175 | name: kuchnia
| ^
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:133:33: error: 'expander1' is not captured
133 | ape_binary_output(expander1, 45)};
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:133:15: note: in expansion of macro 'ape_binary_output'
133 | ape_binary_output(expander1, 45)};
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:175:122: note: the lambda has no capture-default
175 | name: kuchnia
| ^
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
/config/esphome/test.yaml:133:47: error: could not convert '{, , , , , , , , , , , , , , , , }' from '' to 'std::vectoresphome::output::BinaryOutput*'
133 | ape_binary_output(expander1, 45)};
| ^
| |
|
In file included from src/main.cpp:254:
/config/esphome/test.yaml: In lambda function:
/config/esphome/test.yaml:247:33: error: 'expander1' is not captured
247 | return {ape_binary_sensor(expander1, 4),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:247:15: note: in expansion of macro 'ape_binary_sensor'
247 | return {ape_binary_sensor(expander1, 4),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:658:122: note: the lambda has no capture-default
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:248:33: error: 'expander1' is not captured
248 | ape_binary_sensor(expander1, 5),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:248:15: note: in expansion of macro 'ape_binary_sensor'
248 | ape_binary_sensor(expander1, 5),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:658:122: note: the lambda has no capture-default
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:249:33: error: 'expander1' is not captured
249 | ape_binary_sensor(expander1, 6),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:249:15: note: in expansion of macro 'ape_binary_sensor'
249 | ape_binary_sensor(expander1, 6),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:658:122: note: the lambda has no capture-default
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:250:33: error: 'expander1' is not captured
250 | ape_binary_sensor(expander1, 7),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:250:15: note: in expansion of macro 'ape_binary_sensor'
250 | ape_binary_sensor(expander1, 7),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:658:122: note: the lambda has no capture-default
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:251:33: error: 'expander1' is not captured
251 | ape_binary_sensor(expander1, 8),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:251:15: note: in expansion of macro 'ape_binary_sensor'
251 | ape_binary_sensor(expander1, 8),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:658:122: note: the lambda has no capture-default
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:252:33: error: 'expander1' is not captured
252 | ape_binary_sensor(expander1, 10),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:252:15: note: in expansion of macro 'ape_binary_sensor'
252 | ape_binary_sensor(expander1, 10),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:658:122: note: the lambda has no capture-default
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:253:33: error: 'expander1' is not captured
253 | ape_binary_sensor(expander1, 54),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:253:15: note: in expansion of macro 'ape_binary_sensor'
253 | ape_binary_sensor(expander1, 54),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:658:122: note: the lambda has no capture-default
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:254:33: error: 'expander1' is not captured
254 | ape_binary_sensor(expander1, 56),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:254:15: note: in expansion of macro 'ape_binary_sensor'
254 | ape_binary_sensor(expander1, 56),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:658:122: note: the lambda has no capture-default
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:255:33: error: 'expander1' is not captured
255 | ape_binary_sensor(expander1, 58),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:255:15: note: in expansion of macro 'ape_binary_sensor'
255 | ape_binary_sensor(expander1, 58),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:658:122: note: the lambda has no capture-default
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:256:33: error: 'expander1' is not captured
256 | ape_binary_sensor(expander1, 59),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:256:15: note: in expansion of macro 'ape_binary_sensor'
256 | ape_binary_sensor(expander1, 59),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:658:122: note: the lambda has no capture-default
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:257:33: error: 'expander1' is not captured
257 | ape_binary_sensor(expander1, 60),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:257:15: note: in expansion of macro 'ape_binary_sensor'
257 | ape_binary_sensor(expander1, 60),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:658:122: note: the lambda has no capture-default
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:258:33: error: 'expander1' is not captured
258 | ape_binary_sensor(expander1, 62),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:258:15: note: in expansion of macro 'ape_binary_sensor'
258 | ape_binary_sensor(expander1, 62),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:658:122: note: the lambda has no capture-default
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:259:33: error: 'expander1' is not captured
259 | ape_binary_sensor(expander1, 63),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:259:15: note: in expansion of macro 'ape_binary_sensor'
259 | ape_binary_sensor(expander1, 63),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:658:122: note: the lambda has no capture-default
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:260:33: error: 'expander1' is not captured
260 | ape_binary_sensor(expander1, 64),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:260:15: note: in expansion of macro 'ape_binary_sensor'
260 | ape_binary_sensor(expander1, 64),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:658:122: note: the lambda has no capture-default
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:261:33: error: 'expander1' is not captured
261 | ape_binary_sensor(expander1, 66),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:261:15: note: in expansion of macro 'ape_binary_sensor'
261 | ape_binary_sensor(expander1, 66),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:658:122: note: the lambda has no capture-default
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:262:33: error: 'expander1' is not captured
262 | ape_binary_sensor(expander1, 68),
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:262:15: note: in expansion of macro 'ape_binary_sensor'
262 | ape_binary_sensor(expander1, 68),
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:658:122: note: the lambda has no capture-default
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
In file included from src/main.cpp:254:
/config/esphome/test.yaml:263:33: error: 'expander1' is not captured
263 | ape_binary_sensor(expander1, 69)};
| ^~~~~~~~~
src/arduino_port_expander.h:41:65: note: in definition of macro 'get_ape'
41 | #define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
| ^~~~~~~~~~~
/config/esphome/test.yaml:263:15: note: in expansion of macro 'ape_binary_sensor'
263 | ape_binary_sensor(expander1, 69)};
| ^~~~~~~~~~~~~~~~~
/config/esphome/test.yaml:658:122: note: the lambda has no capture-default
src/main.cpp:539:48: note: 'esphome::custom_component::CustomComponentConstructor expander1' declared here
539 | custom_component::CustomComponentConstructor expander1 = custom_component::CustomComponentConstructor( -> std::vector<Component *> {
| ^~~~~~~~~
/config/esphome/test.yaml:263:47: error: could not convert '{, , , , , , , , , , , , , , , , }' from '' to 'std::vectoresphome::binary_sensor::BinarySensor*'
263 | ape_binary_sensor(expander1, 69)};
| ^
| |
|
*** [.pioenvs/esp32-rozdzielnia/src/main.cpp.o] Error 1
========================= [FAILED] Took 637.11 seconds =========================