Portfile for nginx with file upload module, and upload status

Portfile

# -*- coding: utf-8; mode: tcl; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- vim:fenc=utf-8:ft=tcl:et:sw=4:ts=4:sts=4
# $Id: Portfile 86786 2011-11-04 05:20:35Z [email protected] $

PortSystem          1.0

name                nginx
version             1.0.8
categories          www mail
platforms           darwin
license             BSD
maintainers         nomaintainer

description         High-performance HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server
long_description    Nginx ("engine x") is a high-performance HTTP(S) server \
                    and reverse proxy, as well as an IMAP/POP3 proxy server. \
                    Nginx was written by Igor Sysoev for Rambler.ru, Russia's \
                    second-most visited website, where it has been running in \
                    production for over two and a half years. Igor has \
                    released the source code under a BSD-like license. \
                    Although still in beta, Nginx is known for its stability, \
                    rich feature set, simple configuration, and low resource \
                    consumption.

homepage            http://nginx.org/
master_sites        http://nginx.org/download:nginx \
                    http://www.grid.net.ru/nginx/download/:upload_module \
                    http://wiki.nginx.org/images/1/10/:secure_download_module \
                    http://wiki.nginx.org/images/b/bb/:zip_module \
                    http://people.freebsd.org/~osa/:redis_module

distfiles           ${name}-${version}${extract.suffix}:nginx
checksums           ${name}-${version}${extract.suffix} \
                    rmd160  45d0e0d2c21a18fb2b0a69321e55526fb26ba22e \
                    sha256  9bde8d054dcdcc6aedcbd87b456049b39ba930bfee284edb15817ab64ec72ba7

depends_lib         \
                    port:pcre \
                    port:zlib

patchfiles          patch-auto__install.diff \
                    patch-conf__nginx.conf.diff

set nginx_confdir   ${prefix}/etc/${name}
set nginx_logdir    ${prefix}/var/log/${name}
set nginx_rundir    ${prefix}/var/run/${name}
set nginx_pidfile   ${nginx_rundir}/${name}.pid

configure.args-append \
                    --with-cc-opt=\"${configure.cppflags} ${configure.cflags}\" \
                    --with-ld-opt=\"${configure.ldflags}\" \
                    --conf-path=${nginx_confdir}/${name}.conf \
                    --error-log-path=${nginx_logdir}/error.log \
                    --http-log-path=${nginx_logdir}/access.log \
                    --pid-path=${nginx_pidfile} \
                    --lock-path=${nginx_rundir}/${name}.lock \
                    --http-client-body-temp-path=${nginx_rundir}/client_body_temp \
                    --http-proxy-temp-path=${nginx_rundir}/proxy_temp \
                    --http-fastcgi-temp-path=${nginx_rundir}/fastcgi_temp \
                    --http-uwsgi-temp-path=${nginx_rundir}/uwsgi_temp

default_variants    +ipv6
universal_variant   no

build.target        build
destroot.keepdirs   ${destroot}${nginx_logdir} \
                    ${destroot}${nginx_rundir}

set nginx_conf ${prefix}/etc/${name}/${name}.conf
post-destroot {
    delete ${destroot}${nginx_conf}
}
pre-activate {
    # Try to cover for the fact that, in earlier revisions of this port, the
    # configuration file was installed live instead of an example, in which
    # case an upgrade will clobber any customisations that a user might have
    # made :(
    set nginx_conf_is_registered_to_nginx \
        [expr {[registry_file_registered ${nginx_conf}] == "${name}"}]
    set nginx_conf_differs \
        [catch {exec cmp ${nginx_conf} ${nginx_conf}.example}]
    if { ${nginx_conf_is_registered_to_nginx} && ${nginx_conf_differs} } {
        copy ${nginx_conf} ${nginx_conf}.altered
        ui_msg ""
        ui_msg "###############################################################"
        ui_msg "# It appears that you have altered ${nginx_conf},"
        ui_msg "# and that upgrading or uninstalling your previous installation"
        ui_msg "# of ${name} will clobber your copy.  It has been copied to"
        ui_msg "# ${nginx_conf}.altered for preservation when you upgrade or"
        ui_msg "# uninstall ${name}.  This problem should not occur with future"
        ui_msg "# upgrades or installations of this port.\n"
        ui_msg "###############################################################"
        ui_msg ""
    }
}

startupitem.create      yes
startupitem.executable  ${prefix}/sbin/nginx
startupitem.pidfile     auto ${nginx_pidfile}

variant dav description {Add WebDAV support to server} {
    configure.args-append   --with-http_dav_module
}

variant flv description {Add FLV (Flash Video) streaming support to server} {
    configure.args-append   --with-http_flv_module
}

variant mail description {Add IMAP4/POP3 mail proxy support} {
    configure.args-append   --with-mail
}

variant ssl description {Add SSL (HTTPS) support to the server, and\
        also to the mail proxy if that is enabled} {
    depends_lib-append      port:openssl
    configure.args-append   --with-http_ssl_module
    if [variant_isset mail] {
        configure.args-append   --with-mail_ssl_module
    }
}

variant status description {Add /nginx_status support to the server} {
    configure.args-append   --with-http_stub_status_module
}

variant ipv6 description {Add support for ipv6} {
    configure.args-append   --with-ipv6
}

# This variant has been labelled "perl5" so as to allow users to easily stick
# with perl 5.x once perl 6.x is released; a "perl6" variant will also be added
# at that time.
variant perl5 description {Add perl support to the server directly within\
        nginx and call perl via SSI} {
    depends_run-append	    path:bin/perl:perl5
    configure.args-append   --with-http_perl_module \
                            --with-perl=${prefix}/bin/perl
}

variant realip description {Using nginx as a backend} {
    configure.args-append   --with-http_realip_module
}

variant addition description {Append text to pages} {
    configure.args-append   --with-http_addition_module
}

variant substitution description {Replace text in pages} {
    configure.args-append   --with-http_sub_module
}

variant gzip_static description {Avoids compressing the same file each\
        time it is requested} {
    configure.args-append   --with-http_gzip_static_module
}

variant google_perftools description {Enable Google Performance Tools\
        profiling for workers} {
    depends_lib-append      port:google-perftools
    configure.args-append   --with-google_perftools_module
}

variant upload description {Enable Valery Kholodkov's upload module\
        (http://grid.net.ru/nginx/upload.en.html)} {
    set upload_filename nginx_upload_module
    set upload_version  2.2.0
    set upload_distname ${upload_filename}-${upload_version}
    distfiles-append    ${upload_distname}.tar.gz:upload_module
    checksums-append    ${upload_distname}.tar.gz \
                        md5     2681a6167551830a23336fa41bc539a1 \
                        sha1    93d6e83e613a0ce2ed057a434b344fa1b6609b47 \
                        rmd160  5734af837be3fe8ec444a7e5e7f6707118594098
    configure.args-append   --add-module=${workpath}/${upload_distname}
}

variant secure_download description {Enable Ngx http secure download \
        (http://wiki.nginx.org/HttpSecureDownload)} {

    set secure_download_distname Ngx_http_secure_download
    distfiles-append    ${secure_download_distname}.tar.gz:secure_download_module
    checksums-append    ${secure_download_distname}.tar.gz \
                            md5     8d83bfb4853ed76eb22453712c394519
    configure.args-append   --add-module=${workpath}/${secure_download_distname}
    depends_lib-append  port:mhash
}

variant zip description {Enable Ngx zip download module \
        (http://wiki.nginx.org/NginxNgxZip)} {

    set zip_distname Mod_zip-1.1.4
    distfiles-append    ${zip_distname}.tar.gz:zip_module
    checksums-append    ${zip_distname}.tar.gz \
                            md5     be934138446793ca783ebfcc1a74883d
    configure.args-append   --add-module=${workpath}/${zip_distname}
}

variant redis description {Enable Ngx HTTP Redis module} {
    set redis_filename  ngx_http_redis
    set redis_version   0.3.1
    set redis_distname  ${redis_filename}-${redis_version}
    distfiles-append    ${redis_distname}.tar.gz:redis_module
    checksums-append    ${redis_distname}.tar.gz \
                            md5     c731d6ac14b4c8a99fda2c7e89356a8f
    configure.args-append   --add-module=${workpath}/${redis_distname}
}

variant geoip description {Enable Ngx http GeoIP module \
        (http://wiki.nginx.org/HttpGeoIPModule)} {

    configure.args-append  --with-http_geoip_module
    depends_lib-append  port:libgeoip
}

variant debug description {Enable debug mode} {
    configure.args-append   --with-debug
}

livecheck.type      regex
livecheck.url       http://trac.nginx.org/nginx/browser/nginx_org/xml/versions.xml?format=txt
livecheck.regex     "<stable> *(\\d+(?:\\.\\d+)*)"