gistfile1.txt

Linux version 2.6.31.7 (mitch@home) (gcc version 4.1.2) #1 Sat Dec 19 13:00:37 GST 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
DMI not present or invalid.
last_pfn = 0x10000 max_arch_pfn = 0x100000
init_memory_mapping: 0000000000000000-0000000010000000
ACPI Error: A valid RSDP was not found 20090521 tbxfroot-219
256MB LOWMEM available.
  mapped low ram: 0 - 10000000
  low ram: 0 - 10000000
  node 0 low ram: 00000000 - 10000000
  node 0 bootmap 00001000 - 00003000
(5 early reservations) ==> bootmem [0000000000 - 0010000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0001000000 - 0001348c8c]    TEXT DATA BSS ==> [0001000000 - 0001348c8c]
  #2 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
  #3 [0001349000 - 000134f000]              BRK ==> [0001349000 - 000134f000]
  #4 [0000001000 - 0000003000]          BOOTMAP ==> [0000001000 - 0000003000]
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x00010000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x000000a0
    0: 0x00000100 -> 0x00010000
Using APIC driver default
No local APIC present or hardware disabled
APIC: disable apic facility
Allocating PCI resources starting at 10000000 (gap: 10000000:eff00000)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64928
Kernel command line: root=/dev/hda2 rootfstype=ext2 rootwait  noinitrd console=tty0 console=ttyS0,38400n8 reboot=bios
PID hash table entries: 1024 (order: 10, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Initializing CPU#0
Memory: 255864k/262144k available (2166k kernel code, 5640k reserved, 793k data, 280k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfffa3000 - 0xfffff000   ( 368 kB)
    vmalloc : 0xd0800000 - 0xfffa1000   ( 759 MB)
    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
      .init : 0xc12e4000 - 0xc132a000   ( 280 kB)
      .data : 0xc121d8a4 - 0xc12e3d5c   ( 793 kB)
      .text : 0xc1000000 - 0xc121d8a4   (2166 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:288
Fast TSC calibration using PIT
Detected 497.946 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
console [ttyS0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 995.89 BogoMIPS (lpj=4979460)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 128K (32 bytes/line)
CPU: Geode(TM) Integrated Processor by AMD PCS stepping 02
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfcd03, last bus=0
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Interpreter disabled.
SCSI subsystem initialized
PCI: Probing PCI hardware
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0e.0: PME# supported from D0 D3hot
pci 0000:00:0e.0: PME# disabled
pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold
pci 0000:00:0f.4: PME# disabled
pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold
pci 0000:00:0f.5: PME# disabled
pnp: PnP ACPI: disabled
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
platform rtc_cmos: registered platform RTC device (no PNP device found)
scx200: NatSemi SCx200 Driver
microcode: no support for this CPU vendor
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $
JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
msgmni has been set to 500
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered (default)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12b
Non-volatile memory driver v1.3
AMD Geode RNG detected
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
TCP westwood registered
NET: Registered protocol family 17
Bridge firewalling registered
802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
All bugs added by David S. Miller <[email protected]>
Using IPI Shortcut mode
Waiting for root device /dev/hda2...
ata1.00: CFA: SanDisk SDCFH-2048, HDX 4.32, max MWDMA2
ata1.00: 4001760 sectors, multi 0: LBA
ata1.00: configured for MWDMA2
scsi 0:0:0:0: Direct-Access     ATA      SanDisk SDCFH-20 HDX  PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 4001760 512-byte logical blocks: (2.04 GB/1.90 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sda:
 sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI removable disk