dmesg with modified amixer and firmware

dmesg-with-new-fw_sst_0f28.bin.txt

[    0.000000] Linux version 4.7.0-rc4+ (root@srikant-vbox) (gcc version 4.9.3 (Ubuntu 4.9.3-8ubuntu2~14.04) ) #5 SMP Tue Jul 19 10:38:15 IST 2016
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.7.0-rc4+ root=UUID=ced35319-add5-4ea3-811e-d7f96d9a5226 ro quiet intel_idle.max_cstate=1 splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000007be68fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007be69000-0x000000007be98fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007be99000-0x000000007beccfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007becd000-0x000000007c3ecfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007c3ed000-0x000000007c655fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007c656000-0x000000007c6aafff] type 20
[    0.000000] BIOS-e820: [mem 0x000000007c6ab000-0x000000007cbfffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc80000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI=0x7becc000  ACPI 2.0=0x7becc014  ESRT=0x7be98000  SMBIOS=0x7c655290 
[    0.000000] efi: requested map not found.
[    0.000000] esrt: ESRT header is not in the memory map.
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./To be filled by O.E.M., BIOS 5.6.5 07/14/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7cc00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07E000000 mask FFE000000 uncachable
[    0.000000]   2 base 07D000000 mask FFF000000 uncachable
[    0.000000]   3 base 07CE00000 mask FFFE00000 uncachable
[    0.000000]   4 base 07CE00000 mask FFFE00000 uncachable
[    0.000000]   5 base 07CD00000 mask FFFF00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] total RAM covered: 1997M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 64M 	num_reg: 5  	lose cover RAM: 0G
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] BRK [0x031a8000, 0x031a8fff] PGTABLE
[    0.000000] BRK [0x031a9000, 0x031a9fff] PGTABLE
[    0.000000] BRK [0x031aa000, 0x031aafff] PGTABLE
[    0.000000] BRK [0x031ab000, 0x031abfff] PGTABLE
[    0.000000] BRK [0x031ac000, 0x031acfff] PGTABLE
[    0.000000] BRK [0x031ad000, 0x031adfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33c50000-0x35e1ffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000007BECC014 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x000000007BECB100 0000CC (v01 ALASKA A M I    00000003 MSFT 0100000D)
[    0.000000] ACPI: FACP 0x000000007BEC6000 00010C (v05 ALASKA A M I    00000003 AMI  0100000D)
[    0.000000] ACPI: DSDT 0x000000007BEB0000 011F02 (v02 ALASKA A M I    00000003 AMI  0100000D)
[    0.000000] ACPI: TCPA 0x000000007BECA000 000032 (v02                 00000000      00000000)
[    0.000000] ACPI: UEFI 0x000000007C3A1000 000042 (v01 ALASKA A M I    00000000      00000000)
[    0.000000] ACPI: BCFG 0x000000007BEC9000 0000BD (v01 ALASKA BATTCON  00000003 AMI  0100000D)
[    0.000000] ACPI: OEM0 0x000000007BEC8000 000084 (v05 ALASKA BATTERY  00000003 AMI  0100000D)
[    0.000000] ACPI: DBG2 0x000000007BEC7000 000072 (v00 ALASKA INTLDBG2 00000003 AMI  0100000D)
[    0.000000] ACPI: HPET 0x000000007BEC5000 000038 (v01 ALASKA A M I    00000003 AMI  0100000D)
[    0.000000] ACPI: LPIT 0x000000007BEC4000 000104 (v01 ALASKA A M I    00000003 AMI  0100000D)
[    0.000000] ACPI: APIC 0x000000007BEC3000 00006C (v03 ALASKA A M I    00000003 AMI  0100000D)
[    0.000000] ACPI: MCFG 0x000000007BEC2000 00003C (v01 ALASKA A M I    00000003 AMI  0100000D)
[    0.000000] ACPI: SSDT 0x000000007BEAF000 0005DA (v01 ALASKA CpuDptf  00000003 AMI  0100000D)
[    0.000000] ACPI: SSDT 0x000000007BEAC000 00249B (v01 ALASKA DptfTab  00000003 AMI  0100000D)
[    0.000000] ACPI: SSDT 0x000000007BEAB000 000058 (v01 ALASKA LowPwrM  00000003 AMI  0100000D)
[    0.000000] ACPI: SSDT 0x000000007BEAA000 0000FF (v01 ALASKA SoCDptf  00000003 AMI  0100000D)
[    0.000000] ACPI: FPDT 0x000000007BEA9000 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x000000007BEA8000 000763 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x000000007BEA7000 000290 (v01 PmRef  Cpu0Tst  00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x000000007BEA6000 00017A (v01 PmRef  ApTst    00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x000000007BEA5000 000427 (v01 Intel_ Tpm2Tabl 00001000 INTL 20061109)
[    0.000000] ACPI: TPM2 0x000000007BEA4000 000034 (v03                 00000000      00000000)
[    0.000000] ACPI: CSRT 0x000000007BEA3000 00014C (v00 ALASKA A M I    00000005 INTL 20120624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007cbfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x7bc82000-0x7bcacfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007cbfffff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000008efff]
[    0.000000]   node   0: [mem 0x0000000000090000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000007be68fff]
[    0.000000]   node   0: [mem 0x000000007c6ab000-0x000000007cbfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007cbfffff]
[    0.000000] On node 0 totalpages: 508250
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7920 pages used for memmap
[    0.000000]   DMA32 zone: 504254 pages, LIFO batch:31
[    0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[    0.000000] Reserving Intel graphics stolen memory at 0x7cf00000-0x7eefffff
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-86
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7be69000-0x7be98fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7be99000-0x7beccfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7becd000-0x7c3ecfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c3ed000-0x7c655fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c656000-0x7c6aafff]
[    0.000000] e820: [mem 0x7ef00000-0xe00f7fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 34 pages/cpu @ffff88007ba00000 s99352 r8192 d31720 u524288
[    0.000000] pcpu-alloc: s99352 r8192 d31720 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 500244
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.7.0-rc4+ root=UUID=ced35319-add5-4ea3-811e-d7f96d9a5226 ro quiet intel_idle.max_cstate=1 splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 1901616K/2033000K available (6680K kernel code, 1423K rwdata, 2976K rodata, 1800K init, 2532K bss, 131384K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:524544 nr_irqs:1024 0
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Maximum core-clock to bus-clock ratio: 0x10
[    0.000000] Resolved frequency ID: 0, frequency: 83200 KHz
[    0.000000] TSC runs at 1331200 KHz
[    0.000000] lapic_timer_frequency = 332800
[    0.000000] tsc: Detected 1331.200 MHz processor
[    0.000047] Calibrating delay loop (skipped), value calculated using timer frequency.. 2662.40 BogoMIPS (lpj=5324800)
[    0.000055] pid_max: default: 32768 minimum: 301
[    0.000074] ACPI: Core revision 20160422
[    0.001225] Security Framework initialized
[    0.001233] Yama: becoming mindful.
[    0.001250] AppArmor: AppArmor initialized
[    0.001708] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.003126] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.003773] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.003788] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.004358] CPU: Physical Processor ID: 0
[    0.004365] CPU: Processor Core ID: 0
[    0.004373] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.004376] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.004388] mce: CPU supports 6 MCE banks
[    0.004401] CPU0: Thermal monitoring enabled (TM1)
[    0.004410] process: using mwait in idle threads
[    0.004418] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.004423] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[    0.004940] Freeing SMP alternatives memory: 24K (ffffffff81f27000 - ffffffff81f2d000)
[    0.012013] ftrace: allocating 27732 entries in 109 pages
[    0.034631] smpboot: Max logical packages: 1
[    0.034640] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.034709] TSC deadline timer enabled
[    0.034716] smpboot: CPU0: Intel(R) Atom(TM) CPU  Z3735F @ 1.33GHz (family: 0x6, model: 0x37, stepping: 0x8)
[    0.034727] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[    0.034748] ... version:                3
[    0.034751] ... bit width:              40
[    0.034754] ... generic registers:      2
[    0.034758] ... value mask:             000000ffffffffff
[    0.034761] ... max period:             000000ffffffffff
[    0.034764] ... fixed-purpose events:   3
[    0.034767] ... event mask:             0000000700000003
[    0.036281] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.036633] x86: Booting SMP configuration:
[    0.036639] .... node  #0, CPUs:      #1 #2 #3
[    0.277156] x86: Booted up 1 node, 4 CPUs
[    0.277164] smpboot: Total of 4 processors activated (10656.07 BogoMIPS)
[    0.278559] devtmpfs: initialized
[    0.278744] x86/mm: Memory block size: 128MB
[    0.288180] evm: security.selinux
[    0.288184] evm: security.SMACK64
[    0.288187] evm: security.SMACK64EXEC
[    0.288190] evm: security.SMACK64TRANSMUTE
[    0.288193] evm: security.SMACK64MMAP
[    0.288196] evm: security.ima
[    0.288198] evm: security.capability
[    0.288337] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[    0.288343] PM: Registering ACPI NVS region [mem 0x7becd000-0x7c3ecfff] (5373952 bytes)
[    0.288711] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.288805] pinctrl core: initialized pinctrl subsystem
[    0.289051] RTC time:  9:50:59, date: 08/12/16
[    0.289395] NET: Registered protocol family 16
[    0.298989] cpuidle: using governor ladder
[    0.311002] cpuidle: using governor menu
[    0.311008] PCCT header not found.
[    0.311138] ACPI: bus type PCI registered
[    0.311144] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.311312] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.311319] PCI: not using MMCONFIG
[    0.311323] PCI: Using configuration type 1 for base access
[    0.323378] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.324147] ACPI: Added _OSI(Module Device)
[    0.324153] ACPI: Added _OSI(Processor Device)
[    0.324158] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.324161] ACPI: Added _OSI(Processor Aggregator Device)
[    0.369577] ACPI: 9 ACPI AML tables successfully acquired and loaded

[    0.394160] ACPI: Dynamic OEM Table Load:
[    0.394183] ACPI: SSDT 0xFFFF8800761B1800 000501 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.396367] ACPI: Dynamic OEM Table Load:
[    0.396386] ACPI: SSDT 0xFFFF8800761B2000 000433 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.399222] ACPI: Dynamic OEM Table Load:
[    0.399239] ACPI: SSDT 0xFFFF88007639F400 00015F (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.401376] ACPI: Dynamic OEM Table Load:
[    0.401393] ACPI: SSDT 0xFFFF88007B41F180 00008D (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.407697] ACPI: Interpreter enabled
[    0.407740] ACPI: (supports S0 S5)
[    0.407746] ACPI: Using IOAPIC for interrupt routing
[    0.407836] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.423451] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] not reserved in ACPI motherboard resources
[    0.423458] PCI: not using MMCONFIG
[    0.423467] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.429821] ACPI: Power Resource [USBC] (on)
[    0.430710] ACPI: Power Resource [WWPR] (off)
[    0.436926] ACPI: Power Resource [PLPE] (on)
[    0.446972] ACPI: Power Resource [CLK0] (on)
[    0.447109] ACPI: Power Resource [CLK1] (on)
[    0.447415] ACPI: Power Resource [P28P] (off)
[    0.447550] ACPI: Power Resource [P18P] (off)
[    0.452729] ACPI: Power Resource [CLK0] (on)
[    0.452859] ACPI: Power Resource [CLK1] (on)
[    0.468909] ACPI: Power Resource [P28X] (off)
[    0.469042] ACPI: Power Resource [P18X] (off)
[    0.469189] ACPI: Power Resource [P28T] (off)
[    0.469329] ACPI: Power Resource [P18T] (off)
[    0.469464] ACPI: Power Resource [P1XT] (off)
[    0.479948] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.479963] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.480093] \_SB_.PCI0 (33DB4D5B-1FF7-401C-9657-7441C03DD766): _OSC invalid UUID
[    0.480098] _OSC request data: 1 1e 0
[    0.480110] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.480141] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.481095] PCI host bridge to bus 0000:00
[    0.481105] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.481111] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.481117] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.481123] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.481128] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.481134] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.481139] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.481145] pci_bus 0000:00: root bus resource [mem 0x90c00000-0x90ffffff window]
[    0.481150] pci_bus 0000:00: root bus resource [mem 0x7cf00001-0x7ef00000 window]
[    0.481156] pci_bus 0000:00: root bus resource [mem 0x80000000-0x908ffffe window]
[    0.481161] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff window]
[    0.481167] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.481185] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[    0.481472] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[    0.481493] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff]
[    0.481510] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
[    0.481527] pci 0000:00:02.0: reg 0x20: [io  0x1000-0x1007]
[    0.481809] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[    0.481836] pci 0000:00:14.0: reg 0x10: [mem 0x90800000-0x9080ffff 64bit]
[    0.481917] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.482163] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[    0.482191] pci 0000:00:1a.0: reg 0x10: [mem 0x90700000-0x907fffff]
[    0.482206] pci 0000:00:1a.0: reg 0x14: [mem 0x90600000-0x906fffff]
[    0.482308] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.482543] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[    0.483826] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.484038] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.484238] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.484436] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.484633] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.484832] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.485031] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.485228] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.501991] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.501999] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.502004] vgaarb: loaded
[    0.502007] vgaarb: bridge control possible 0000:00:02.0
[    0.502861] PCI: Using ACPI for IRQ routing
[    0.502867] PCI: pci_cache_line_size set to 64 bytes
[    0.502893] Expanded resource reserved due to conflict with PCI Bus 0000:00
[    0.502899] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[    0.502904] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.502909] e820: reserve RAM buffer [mem 0x7be69000-0x7bffffff]
[    0.502913] e820: reserve RAM buffer [mem 0x7cc00000-0x7fffffff]
[    0.503175] NetLabel: Initializing
[    0.503180] NetLabel:  domain hash size = 128
[    0.503183] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.503217] NetLabel:  unlabeled traffic allowed by default
[    0.503481] clocksource: Switched to clocksource refined-jiffies
[    0.519779] VFS: Disk quotas dquot_6.6.0
[    0.519824] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.519997] AppArmor: AppArmor Filesystem Enabled
[    0.520154] pnp: PnP ACPI init
[    0.520306] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.520634] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.520643] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.520649] system 00:01: [io  0x0500-0x05fe] has been reserved
[    0.520655] system 00:01: [io  0x0600-0x061f] has been reserved
[    0.520662] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.520672] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.520950] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.526661] pnp: PnP ACPI: found 3 devices
[    0.532347] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    0.532355] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    0.532361] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    0.532367] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.532373] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.532378] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.532384] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    0.532390] pci_bus 0000:00: resource 11 [mem 0x90c00000-0x90ffffff window]
[    0.532395] pci_bus 0000:00: resource 12 [mem 0x7cf00001-0x7ef00000 window]
[    0.532401] pci_bus 0000:00: resource 13 [mem 0x80000000-0x908ffffe window]
[    0.532407] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed40fff window]
[    0.532474] NET: Registered protocol family 2
[    0.532878] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.532997] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.533116] TCP: Hash tables configured (established 16384 bind 16384)
[    0.533178] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.533211] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.533322] NET: Registered protocol family 1
[    0.533359] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.533751] PCI: CLS 0 bytes, default 64
[    0.533887] Unpacking initramfs...
[    1.910432] Freeing initrd memory: 34624K (ffff880033c50000 - ffff880035e20000)
[    1.910707] Scanning for low memory corruption every 60 seconds
[    1.911682] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    1.911735] audit: initializing netlink subsys (disabled)
[    1.911782] audit: type=2000 audit(1470995460.888:1): initialized
[    1.912692] Initialise system trusted keyrings
[    1.912920] workingset: timestamp_bits=33 max_order=19 bucket_order=0
[    1.918096] zbud: loaded
[    1.918570] Key type big_key registered
[    1.919552] Key type asymmetric registered
[    1.919559] Asymmetric key parser 'x509' registered
[    1.919685] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.919770] io scheduler noop registered
[    1.919775] io scheduler deadline registered (default)
[    1.919875] io scheduler cfq registered
[    1.920151] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.920169] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.920290] efifb: probing for efifb
[    1.920317] efifb: framebuffer at 0x80000000, using 4160k, total 4160k
[    1.920322] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    1.920325] efifb: scrolling: redraw
[    1.920330] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.930593] Console: switching to colour frame buffer device 170x48
[    1.940486] fb0: EFI VGA frame buffer device
[    1.940511] intel_idle: MWAIT substates: 0x33000020
[    1.940516] intel_idle: v0.4.1 model 0x37
[    1.940523] intel_idle: max_cstate 1 reached
[    1.940700] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.945105] GHES: HEST is not enabled!
[    1.945237] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.965405] 00:02: ttyS0 at I/O 0x3f8 (irq = 199, base_baud = 115200) is a 16550A
[    1.969662] hpet: number irqs doesn't agree with number of timers
[    1.970977] PPP generic driver version 2.4.2
[    1.971136] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    2.881669] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x13303f810e3, max_idle_ns: 440795235405 ns
[    3.006542] i8042: No controller found
[    3.006565] clocksource: Switched to clocksource tsc
[    3.006833] mousedev: PS/2 mouse device common for all mice
[    3.006967] ACPI Warning: Could not enable fixed event - RealTimeClock (4) (20160422/evxface-654)
[    3.007178] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    3.007224] rtc_cmos 00:00: alarms up to one day, 242 bytes nvram
[    3.007280] intel_pstate: Intel P-state driver initializing
[    3.007527] ledtrig-cpu: registered to indicate activity on CPUs
[    3.008391] NET: Registered protocol family 10
[    3.009437] NET: Registered protocol family 17
[    3.010863] microcode: CPU0 sig=0x30678, pf=0x2, revision=0x82a
[    3.010910] microcode: CPU1 sig=0x30678, pf=0x2, revision=0x82a
[    3.010955] microcode: CPU2 sig=0x30678, pf=0x2, revision=0x82a
[    3.010991] microcode: CPU3 sig=0x30678, pf=0x2, revision=0x82a
[    3.011242] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    3.012201] registered taskstats version 1
[    3.012226] Loading compiled-in X.509 certificates
[    3.012331] zswap: loaded using pool lzo/zbud
[    3.030170] Key type encrypted registered
[    3.030180] AppArmor: AppArmor sha1 policy hashing enabled
[    3.030184] ima: No TPM chip found, activating TPM-bypass!
[    3.030236] evm: HMAC attrs: 0x1
[    3.030512]   Magic number: 12:653:828
[    3.030708] rtc_cmos 00:00: setting system clock to 2016-08-12 09:51:02 UTC (1470995462)
[    3.031149] PM: Hibernation image not present or could not be loaded.
[    3.034335] Freeing unused kernel memory: 1800K (ffffffff81d65000 - ffffffff81f27000)
[    3.034342] Write protecting the kernel read-only data: 12288k
[    3.035497] Freeing unused kernel memory: 1496K (ffff88000268a000 - ffff880002800000)
[    3.043027] Freeing unused kernel memory: 1120K (ffff880002ae8000 - ffff880002c00000)
[    3.069617] random: systemd-udevd urandom read with 0 bits of entropy available
[    3.154353] sdhci: Secure Digital Host Controller Interface driver
[    3.154359] sdhci: Copyright(c) Pierre Ossman
[    3.164283] hidraw: raw HID events driver (C) Jiri Kosina
[    3.174905] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
[    3.179513] mmc1: SDHCI controller on ACPI [INT33BB:00] using ADMA
[    3.195996] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    3.199211] mmc2: SDHCI controller on ACPI [80860F14:02] using ADMA
[    3.208881] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    3.209100] ACPI: Lid Switch [LID0]
[    3.212000] [Firmware Bug]: No valid trip found
[    3.214351] Linux agpgart interface v0.103
[    3.216975] ACPI: bus type USB registered
[    3.217045] usbcore: registered new interface driver usbfs
[    3.217075] usbcore: registered new interface driver hub
[    3.217156] usbcore: registered new device driver usb
[    3.229637] [drm] Initialized drm 1.1.0 20060810
[    3.235171] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.235190] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    3.236294] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    3.236303] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    3.236483] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.236489] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.236493] usb usb1: Product: xHCI Host Controller
[    3.236498] usb usb1: Manufacturer: Linux 4.7.0-rc4+ xhci-hcd
[    3.236502] usb usb1: SerialNumber: 0000:00:14.0
[    3.236854] hub 1-0:1.0: USB hub found
[    3.236878] hub 1-0:1.0: 6 ports detected
[    3.266659] mmc1: new high speed SDIO card at address 0001
[    3.654394] mmc0: new HS200 MMC card at address 0001
[    3.654847] mmcblk0: mmc0:0001 NCard  28.9 GiB 
[    3.655010] mmcblk0boot0: mmc0:0001 NCard  partition 1 4.00 MiB
[    3.655439] mmcblk0boot1: mmc0:0001 NCard  partition 2 4.00 MiB
[    3.655581] mmcblk0rpmb: mmc0:0001 NCard  partition 3 4.00 MiB
[    3.658599]  mmcblk0: p1 p2 p3 p4
[    3.750711] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.750725] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    3.750837] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    3.750843] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.750848] usb usb2: Product: xHCI Host Controller
[    3.750852] usb usb2: Manufacturer: Linux 4.7.0-rc4+ xhci-hcd
[    3.750856] usb usb2: SerialNumber: 0000:00:14.0
[    3.751190] hub 2-0:1.0: USB hub found
[    3.751213] hub 2-0:1.0: 1 port detected
[    3.753003] [drm] Memory usable by graphics device = 2048M
[    3.753012] checking generic (80000000 410000) vs hw (80000000 10000000)
[    3.753016] fb: switching to inteldrmfb from EFI VGA
[    3.753068] Console: switching to colour dummy device 80x25
[    3.753235] [drm] Replacing VGA console driver
[    3.753361] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.753365] [drm] Driver supports precise vblank timestamp query.
[    3.878417] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.936903] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.937527] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input1
[    3.937725] [drm] Initialized i915 1.6.0 20160425 for 0000:00:02.0 on minor 0
[    4.062418] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    4.062606] fbcon: inteldrmfb (fb0) is primary device
[    4.191659] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
[    4.191663] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    4.191665] usb 1-1: Product: USB2.0 Hub
[    4.192292] hub 1-1:1.0: USB hub found
[    4.192577] hub 1-1:1.0: 4 ports detected
[    4.466419] usb 1-1.1: new high-speed USB device number 3 using xhci_hcd
[    4.555578] usb 1-1.1: New USB device found, idVendor=0bda, idProduct=8176
[    4.555582] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.555585] usb 1-1.1: Product: 802.11n WLAN Adapter
[    4.555587] usb 1-1.1: Manufacturer: Realtek
[    4.555589] usb 1-1.1: SerialNumber: 00e04c000001
[    4.626420] usb 1-1.2: new high-speed USB device number 4 using xhci_hcd
[    4.854279] usb 1-1.2: New USB device found, idVendor=058f, idProduct=5608
[    4.854283] usb 1-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[    4.854285] usb 1-1.2: Product: USB 2.0 WebCamera
[    4.854287] usb 1-1.2: Manufacturer: Alcor Micro, Corp.
[    4.934418] usb 1-1.4: new low-speed USB device number 5 using xhci_hcd
[    5.028084] usb 1-1.4: New USB device found, idVendor=1d0b, idProduct=0102
[    5.028088] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.028090] usb 1-1.4: Product: USB KB & TouchPad
[    5.028093] usb 1-1.4: Manufacturer: YCK-092A
[    5.039686] usbcore: registered new interface driver usbhid
[    5.039687] usbhid: USB HID core driver
[    5.041212] input: YCK-092A USB KB & TouchPad as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:1D0B:0102.0001/input/input2
[    5.094625] hid-generic 0003:1D0B:0102.0001: input,hidraw0: USB HID v1.01 Keyboard [YCK-092A USB KB & TouchPad] on usb-0000:00:14.0-1.4/input0
[    5.095165] input: YCK-092A USB KB & TouchPad as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:1D0B:0102.0002/input/input3
[    5.150765] hid-generic 0003:1D0B:0102.0002: input,hiddev0,hidraw1: USB HID v1.01 Mouse [YCK-092A USB KB & TouchPad] on usb-0000:00:14.0-1.4/input1
[    5.426525] Console: switching to colour frame buffer device 170x48
[    5.563044] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    5.679934] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    5.956871] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    5.957262] systemd[1]: Detected architecture x86-64.
[    5.960262] systemd[1]: Set hostname to <linux>.
[    6.166100] systemd[1]: Reached target Remote File Systems (Pre).
[    6.166346] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.166384] systemd[1]: Reached target Remote File Systems.
[    6.166548] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.166635] systemd[1]: Listening on udev Kernel Socket.
[    6.166741] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.166993] systemd[1]: Created slice User and Session Slice.
[    6.167066] systemd[1]: Listening on fsck to fsckd communication Socket.
[    6.167270] systemd[1]: Created slice System Slice.
[    6.167505] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    6.167552] systemd[1]: Reached target Encrypted Volumes.
[    6.167889] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.168067] systemd[1]: Listening on Journal Audit Socket.
[    6.168184] systemd[1]: Listening on Journal Socket.
[    6.182546] systemd[1]: Mounting POSIX Message Queue File System...
[    6.183858] systemd[1]: Starting Uncomplicated firewall...
[    6.185375] systemd[1]: Mounting Debug File System...
[    6.187331] systemd[1]: Started Braille Device Support.
[    6.198158] systemd[1]: Starting Load Kernel Modules...
[    6.199586] systemd[1]: Mounting Huge Pages File System...
[    6.201061] systemd[1]: Started Read required files in advance.
[    6.201355] systemd[1]: Reached target User and Group Name Lookups.
[    6.203066] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.203216] systemd[1]: Listening on Syslog Socket.
[    6.204859] systemd[1]: Starting Journal Service...
[    6.205068] systemd[1]: Listening on udev Control Socket.
[    6.205491] systemd[1]: Created slice system-getty.slice.
[    6.205557] systemd[1]: Reached target Slices.
[    6.209515] systemd[1]: Mounted Huge Pages File System.
[    6.209595] systemd[1]: Mounted POSIX Message Queue File System.
[    6.209647] systemd[1]: Mounted Debug File System.
[    6.210288] systemd[1]: Started Uncomplicated firewall.
[    6.217198] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    6.258722] systemd[1]: Starting Create Static Device Nodes in /dev...
[    6.264779] lp: driver loaded but no devices found
[    6.272412] ppdev: user-space parallel port driver
[    6.278294] systemd[1]: Started Load Kernel Modules.
[    6.280014] systemd[1]: Starting Apply Kernel Variables...
[    6.313509] systemd[1]: Started Journal Service.
[    6.513701] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[    6.543615] systemd-journald[199]: Received request to flush runtime journal from PID 1
[    6.744758] ACPI Error: No handler for Region [XSCG] (ffff8800763c1af8) [GenericSerialBus] (20160422/evregion-166)
[    6.744771] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20160422/exfldio-299)
[    6.744779] ACPI Error: Method parse/execution failed [\_SB.I2C5.BMBT.PSRC] (Node ffff8800763caac8), AE_NOT_EXIST (20160422/psparse-542)
[    6.744795] ACPI Error: Method parse/execution failed [\_SB.ADP1._PSR] (Node ffff8800763c9898), AE_NOT_EXIST (20160422/psparse-542)
[    6.744813] ACPI Exception: AE_NOT_EXIST, Error reading AC Adapter state (20160422/ac-128)
[    6.755313] 80860F0A:00: ttyS4 at MMIO 0x90941000 (irq = 191, base_baud = 2764800) is a 16550A
[    6.771422] 80860F0A:01: ttyS5 at MMIO 0x90947000 (irq = 192, base_baud = 2764800) is a 16550A
[    6.820460] Bluetooth: Core ver 2.21
[    6.820496] NET: Registered protocol family 31
[    6.820500] Bluetooth: HCI device and connection manager initialized
[    6.820508] Bluetooth: HCI socket layer initialized
[    6.820515] Bluetooth: L2CAP socket layer initialized
[    6.820530] Bluetooth: SCO socket layer initialized
[    6.847288] Bluetooth: HCI UART driver ver 2.3
[    6.847296] Bluetooth: HCI UART protocol H4 registered
[    6.847299] Bluetooth: HCI UART protocol BCSP registered
[    6.847302] Bluetooth: HCI UART protocol LL registered
[    6.847305] Bluetooth: HCI UART protocol ATH3K registered
[    6.847308] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    6.847395] Bluetooth: HCI UART protocol Intel registered
[    6.847456] Bluetooth: HCI UART protocol BCM registered
[    6.847460] Bluetooth: HCI UART protocol QCA registered
[    6.847463] Bluetooth: HCI UART protocol AG6XX registered
[    6.907147] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[    6.938939] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[    6.951055] mei_txe 0000:00:1a.0: can't derive routing for PCI INT A
[    6.951063] mei_txe 0000:00:1a.0: PCI INT A: not connected
[    6.985850] i2c_designware 80860F41:04: I2C bus managed by PUNIT
[    7.007573] [Firmware Bug]: No valid trip found
[    7.022885] ACPI: Battery Slot [BMBT] (battery present)
[    7.042307] intel_sst_acpi 80860F28:00: Detected Baytrail-CR platform
[    7.042575] intel_sst_acpi 80860F28:00: LPE base: 0x90a00000 size:0x200000
[    7.042581] intel_sst_acpi 80860F28:00: IRAM base: 0x90ac0000
[    7.042616] intel_sst_acpi 80860F28:00: DRAM base: 0x90b00000
[    7.042626] intel_sst_acpi 80860F28:00: SHIM base: 0x90b40000
[    7.042637] intel_sst_acpi 80860F28:00: Mailbox base: 0x90b44000
[    7.042647] intel_sst_acpi 80860F28:00: DDR base: 0x20000000
[    7.046508] intel_sst_acpi 80860F28:00: Got drv data max stream 25
[    7.046717] intel_sst_acpi 80860F28:00: registering device Intel(R) SST LPE
[    7.087585] axp20x-i2c i2c-INT33F4:00: AXP20x variant AXP288 found
[    7.172873] media: Linux media interface: v0.10
[    7.173461] EFI Variables Facility v0.08 2004-May-17
[    7.199812] pstore: Registered efi as persistent store backend
[    7.206304] Linux video capture interface: v2.00
[    7.254097] SSE version of gcm_enc/dec engaged.
[    7.259195] uvcvideo: Found UVC 1.00 device USB 2.0 WebCamera (058f:5608)
[    7.265248] Adding 3838972k swap on /dev/mmcblk0p3.  Priority:-1 extents:1 across:3838972k SSFS
[    7.271083] uvcvideo 1-1.2:1.0: Entity type for entity Extension 6 was not initialized!
[    7.271089] uvcvideo 1-1.2:1.0: Entity type for entity Processing 5 was not initialized!
[    7.271093] uvcvideo 1-1.2:1.0: Entity type for entity Selector 4 was not initialized!
[    7.271096] uvcvideo 1-1.2:1.0: Entity type for entity Camera 1 was not initialized!
[    7.271317] input: USB 2.0 WebCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
[    7.271500] usbcore: registered new interface driver uvcvideo
[    7.271502] USB Video Class driver (1.1.1)
[    7.283100] axp20x-i2c i2c-INT33F4:00: AXP20X driver loaded
[    7.370514] genirq: Flags mismatch irq 8. 00000083 (volume_down) vs. 00000080 (rtc0)
[    7.370638] gpio-keys gpio-keys.0.auto: Unable to claim irq 8; error -16
[    7.370781] gpio-keys: probe of gpio-keys.0.auto failed with error -16
[    7.370997] input: gpio-keys as /devices/platform/gpio-keys.1.auto/input/input6
[    7.438282] bytcr_rt5640 bytcr_rt5640: quirk DMIC1_MAP enabled
[    7.438290] bytcr_rt5640 bytcr_rt5640: quirk DMIC enabled
[    7.438295] bytcr_rt5640 bytcr_rt5640: quirk SSP0_AIF2 enabled
[    7.438298] bytcr_rt5640 bytcr_rt5640: quirk MCLK_EN enabled
[    7.543754] bytcr_rt5640 bytcr_rt5640: snd-soc-dummy-dai <-> media-cpu-dai mapping ok
[    7.543838] bytcr_rt5640 bytcr_rt5640: snd-soc-dummy-dai <-> deepbuffer-cpu-dai mapping ok
[    7.543883] compress asoc: snd-soc-dummy-dai <-> compress-cpu-dai mapping ok
[    7.566503] bytcr_rt5640 bytcr_rt5640: rt5640-aif2 <-> ssp0-port mapping ok
[    7.794675] input: axp20x-pek as /devices/platform/80860F41:04/i2c-12/i2c-INT33F4:00/axp20x-pek/input/input7
[    7.850638] random: nonblocking pool is initialized
[    8.266161] rtl8192cu: Chip version 0x10
[    8.311151] rtl8192cu: MAC address: 7c:dd:90:2f:c7:35
[    8.311161] rtl8192cu: Board Type 0
[    8.313221] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[    8.313291] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[    8.332976] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[    8.334534] usbcore: registered new interface driver rtl8192cu
[    8.341893] usbcore: registered new interface driver rtl8xxxu
[    8.346931] rtl8192cu 1-1.1:1.0 wlx7cdd902fc735: renamed from wlan0
[    8.796150] audit: type=1400 audit(1470995468.260:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=469 comm="apparmor_parser"
[    8.796170] audit: type=1400 audit(1470995468.260:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=469 comm="apparmor_parser"
[    8.796184] audit: type=1400 audit(1470995468.260:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=469 comm="apparmor_parser"
[    8.796196] audit: type=1400 audit(1470995468.260:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=469 comm="apparmor_parser"
[    8.802539] audit: type=1400 audit(1470995468.268:6): apparmor="STATUS" operation="profile_load" name="/usr/bin/ubuntu-core-launcher" pid=473 comm="apparmor_parser"
[    8.803861] audit: type=1400 audit(1470995468.268:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=468 comm="apparmor_parser"
[    8.803879] audit: type=1400 audit(1470995468.268:8): apparmor="STATUS" operation="profile_load" name="chromium" pid=468 comm="apparmor_parser"
[    8.814320] audit: type=1400 audit(1470995468.276:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cups-browsed" pid=478 comm="apparmor_parser"
[    8.820208] audit: type=1400 audit(1470995468.284:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ippusbxd" pid=483 comm="apparmor_parser"
[    8.826214] audit: type=1400 audit(1470995468.288:11): apparmor="STATUS" operation="profile_load" name="webbrowser-app" pid=475 comm="apparmor_parser"
[    9.874129] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd902fc735: link is not ready
[    9.875777] rtl8192cu: MAC auto ON okay!
[    9.886634] rtl8192cu: Tx queue select: 0x05
[   10.268472] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd902fc735: link is not ready
[   10.491468] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd902fc735: link is not ready
[   11.474981] wlx7cdd902fc735: authenticate with 28:c6:8e:dd:12:c5
[   11.485822] wlx7cdd902fc735: send auth to 28:c6:8e:dd:12:c5 (try 1/3)
[   11.503702] wlx7cdd902fc735: authenticated
[   11.506497] wlx7cdd902fc735: associate with 28:c6:8e:dd:12:c5 (try 1/3)
[   11.516280] wlx7cdd902fc735: RX AssocResp from 28:c6:8e:dd:12:c5 (capab=0x431 status=0 aid=3)
[   11.517298] wlx7cdd902fc735: associated
[   11.517386] IPv6: ADDRCONF(NETDEV_CHANGE): wlx7cdd902fc735: link becomes ready
[   11.573159] fuse init (API version 7.24)
[   13.083210] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.083219] Bluetooth: BNEP filters: protocol multicast
[   13.083233] Bluetooth: BNEP socket layer initialized
[   13.598502] sst-mfld-platform sst-mfld-platform: Enter: enable=1 port_name=ssp0-port
[   13.599894] intel_sst_acpi 80860F28:00: Alloc for str 3 pipe 0xe
[   13.600122]  Baytrail Audio Port: setting buffer ptr param
[   13.600204] sst-mfld-platform sst-mfld-platform: SET_SWM cmd max inputs reached
[   13.600287] sst-mfld-platform sst-mfld-platform: SET_SWM cmd max inputs reached
[   13.633037] sst-mfld-platform sst-mfld-platform: Enter: enable=0 port_name=ssp0-port
[   13.634845] intel_sst_acpi 80860F28:00: Free for str 3 pipe 0xe
[   13.635704] sst-mfld-platform sst-mfld-platform: SET_SWM cmd max inputs reached
[   13.635825] sst-mfld-platform sst-mfld-platform: SET_SWM cmd max inputs reached
[   13.647905] sst-mfld-platform sst-mfld-platform: Enter: enable=1 port_name=ssp0-port
[   13.648274] intel_sst_acpi 80860F28:00: Alloc for str 3 pipe 0xe
[   13.648390]  Baytrail Audio Port: setting buffer ptr param
[   13.648460] sst-mfld-platform sst-mfld-platform: SET_SWM cmd max inputs reached
[   13.648553] sst-mfld-platform sst-mfld-platform: SET_SWM cmd max inputs reached
[   13.666288] sst-mfld-platform sst-mfld-platform: Enter: enable=0 port_name=ssp0-port
[   13.668244] intel_sst_acpi 80860F28:00: Free for str 3 pipe 0xe
[   13.669194] sst-mfld-platform sst-mfld-platform: SET_SWM cmd max inputs reached
[   13.669325] sst-mfld-platform sst-mfld-platform: SET_SWM cmd max inputs reached
[   13.671224] sst-mfld-platform sst-mfld-platform: Enter: enable=0 port_name=ssp0-port
[   13.673193] sst-mfld-platform sst-mfld-platform: Enter: enable=0 port_name=ssp0-port
[   13.674719] sst-mfld-platform sst-mfld-platform: Enter: enable=0 port_name=ssp0-port
[   13.677836] sst-mfld-platform sst-mfld-platform: Enter: enable=0 port_name=ssp0-port
[   13.682707] sst-mfld-platform sst-mfld-platform: Enter: enable=1 port_name=ssp0-port
[   14.090539] intel_sst_acpi 80860F28:00: Alloc for str 1 pipe 0x90
[   14.090691]  Baytrail Audio Port: setting buffer ptr param
[   14.734563] intel_sst_acpi 80860F28:00: Alloc for str 3 pipe 0xe
[   14.734719]  Baytrail Audio Port: setting buffer ptr param
[   14.734818] sst-mfld-platform sst-mfld-platform: SET_SWM cmd max inputs reached
[   14.734898] sst-mfld-platform sst-mfld-platform: SET_SWM cmd max inputs reached
[   15.242934] intel_sst_acpi 80860F28:00: Free for str 3 pipe 0xe
[   15.247498] sst-mfld-platform sst-mfld-platform: SET_SWM cmd max inputs reached
[   15.248249] sst-mfld-platform sst-mfld-platform: SET_SWM cmd max inputs reached
[   15.331036] intel_sst_acpi 80860F28:00: Alloc for str 3 pipe 0xe
[   15.331172]  Baytrail Audio Port: setting buffer ptr param
[   15.331276] sst-mfld-platform sst-mfld-platform: SET_SWM cmd max inputs reached
[   15.331349] sst-mfld-platform sst-mfld-platform: SET_SWM cmd max inputs reached
[   15.842802] intel_sst_acpi 80860F28:00: Free for str 3 pipe 0xe
[   15.843094] sst-mfld-platform sst-mfld-platform: SET_SWM cmd max inputs reached
[   15.843156] sst-mfld-platform sst-mfld-platform: SET_SWM cmd max inputs reached
[   15.843427] sst-mfld-platform sst-mfld-platform: Enter: enable=0 port_name=ssp0-port
[   15.844457] intel_sst_acpi 80860F28:00: Free for str 1 pipe 0x90
[   15.922639] sst-mfld-platform sst-mfld-platform: Enter: enable=1 port_name=ssp0-port
[   16.062508] intel_sst_acpi 80860F28:00: Alloc for str 1 pipe 0x90
[   16.062640]  Baytrail Audio Port: setting buffer ptr param
[   16.619467]  Baytrail Audio Port: sst_platform_pcm_trigger called
[   16.619477]  Baytrail Audio Port: sst: Trigger Start
[   16.619491]  SSP2-Codec: sst_platform_pcm_trigger called
[   17.543983] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
[   21.639999]  Baytrail Audio Port: sst_platform_pcm_trigger called
[   21.640009]  Baytrail Audio Port: sst: in stop
[   21.640022]  SSP2-Codec: sst_platform_pcm_trigger called
[   21.640118] sst-mfld-platform sst-mfld-platform: Enter: enable=0 port_name=ssp0-port
[   21.641217] intel_sst_acpi 80860F28:00: Free for str 1 pipe 0x90
[   90.553429] sst-mfld-platform sst-mfld-platform: Enter: enable=1 port_name=ssp0-port
[   90.706650] intel_sst_acpi 80860F28:00: Alloc for str 1 pipe 0x90
[   90.706895]  Baytrail Audio Port: setting buffer ptr param
[   91.210839]  Baytrail Audio Port: sst_platform_pcm_trigger called
[   91.210861]  Baytrail Audio Port: sst: Trigger Start
[   91.210890]  SSP2-Codec: sst_platform_pcm_trigger called
[  111.902183]  Baytrail Audio Port: sst_platform_pcm_trigger called
[  111.902205]  Baytrail Audio Port: sst: in stop
[  111.902234]  SSP2-Codec: sst_platform_pcm_trigger called
[  111.902562] sst-mfld-platform sst-mfld-platform: Enter: enable=0 port_name=ssp0-port
[  111.903312] intel_sst_acpi 80860F28:00: Free for str 1 pipe 0x90