dmesg from noname 10" tablet

gistfile1.txt

<6>[    0.000000] Booting Linux on physical CPU 0
<5>[    0.000000] Linux version 3.4.0+ ([email protected]) (gcc version 4.6.1 (Sourcery CodeBench Lite 2011.09-70) ) #2 SMP PREEMPT Fri Apr 25 18:26:17 CST 2014
<4>[    0.000000] Machine: gs702c
<4>[    0.000000] xml_buf_start_phys:0x428d8c0, xml_buf_len:0x3f000
<4>[    0.000000] bin_cfg_xml_buf_start_phys:0x428e760, bin_cfg_xml_buf_len:0x9000
<4>[    0.000000] pinctrl_buf_start_phys:0x207c000, pinctrl_buf_len:0xad60
<4>[    0.000000] tag: dvfslevel: 0x40710503
<4>[    0.000000] tag: icversion: 0x43
<4>[    0.000000] board_opt 0, flags 0x0
<4>[    0.000000] tag: boot_dev 0
<4>[    0.000000] tag: boot_afinfo 0x4000040, len 1024
<6>[    0.000000] bootconsole [earlycon0] enabled
<4>[    0.000000] memblock_reserve,0x428d8c0:0x3f000
<4>[    0.000000] memblock_reserve,0x9000:0x9000
<4>[    0.000000] memblock_reserve,0x207c000:0xad60
<4>[    0.000000] memblock_reserve,0x4000040:0x400
<4>[    0.000000] pfn asoc_ion_start: 149504, asoc_ion_size: 176160768
<6>[    0.000000] cma: CMA: reserved 168 MiB at 24800000
<4>[    0.000000] dma_declare_contiguous successed to reserve mem base: 0x24800000, size: 176160768
<4>[    0.000000] &asoc_ion_device: 0xc078af88
<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
<4>[    0.000000] BUG: mapping for 0x80000000 at 0xffffa000 out of vmalloc space
<7>[    0.000000] On node 0 totalpages: 258304
<7>[    0.000000] free_area_init_node: node 0, pgdat c07bc100, node_mem_map c1269000
<7>[    0.000000]   Normal zone: 1520 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 193040 pages, LIFO batch:31
<7>[    0.000000]   HighMem zone: 528 pages used for memmap
<7>[    0.000000]   HighMem zone: 63216 pages, LIFO batch:15
<4>[    0.000000] bootmem_for_xml:0xc1a74000
<4>[    0.000000] rebuild_xml_tree,xml_buf_start_virt:0x428d8c0, xml_buf_start_phys:0x428d8c0
<4>[    0.000000] rebuild_xml_tree,bootmem_for_xml:0xc1a74000, xml_buf_start_phys:0x428d8c0
<4>[    0.000000] bootmem_for_bin_cfg_xml:0xc1ab3000
<4>[    0.000000] rebuild_xml_tree,bin_cfg_xml_buf_start_virt:0x428e760, bin_cfg_xml_buf_start_phys:0x428e760
<4>[    0.000000] rebuild_xml_tree,bootmem_for_bin_cfg_xml:0xc1ab3000, bin_cfg_xml_buf_start_phys:0x428e760
<4>[    0.000000] asoc_boot_afinfo_init: afinfo_buf 0xc1abc000, afinfo_buf_phys 0x4000040, len 400
<4>[    0.000000] bootmem_for_pinctrl:0xc1abd000
<4>[    0.000000] setup_pinctrl,pinctrl_buf_start_virt:0x207c000, pinctrl_buf_start_phys:0x207c000
<4>[    0.000000] setup_pinctrl,bootmem_for_pinctrl:0xc1abd000, pinctrl_buf_start_phys:0x207c000
<4>[    0.000000] -------buf:0xc1abd000, diff:0xbfa41000-------
<6>[    0.000000] PERCPU: Embedded 7 pages/cpu @c1aca000 s7424 r8192 d13056 u32768
<7>[    0.000000] pcpu-alloc: s7424 r8192 d13056 u32768 alloc=8*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256256
<5>[    0.000000] Kernel command line:   console=ttyS5,115200 earlyprintk androidboot.supportduallogo=0  lowfreq=0 androidboot.serialno=A0D54CEDB8E2EB92   selinux=0  androidboot.bootdev=nand androidboot.dvfslevel=0x7029 
<6>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
<6>[    0.000000] Preemptible hierarchical RCU implementation.
<6>[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
<6>[    0.000000] NR_IRQS:223
<4>[    0.000000] [LEOPARD] timer rate 24000000 Hz
<6>[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
<6>[    0.000000] Console: colour dummy device 80x30
<6>[    0.004589] Calibrating delay loop... 1022.18 BogoMIPS (lpj=5111808)
<6>[    0.062820] pid_max: default: 32768 minimum: 301
<6>[    0.067801] Security Framework initialized
<6>[    0.071949] SELinux:  Disabled at boot.
<6>[    0.075623] AppArmor: AppArmor disabled by boot time parameter
<6>[    0.081664] Mount-cache hash table entries: 512
<6>[    0.087654] CPU: Testing write buffer coherency: ok
<6>[    0.092713] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>[    0.098539] Setting up static identity map for 0x57c850 - 0x57c8a8
<4>[    0.104545] leopard_l2x0_init()
<6>[    0.107929] L310 cache controller enabled
<7>[    0.111945] l2x0: 16 ways, CACHE_ID 0x410000c9, AUX_CTRL 0x3e050000, Cache size: 524288 B
<4>[    0.208928] CPU1: Booted secondary processor
<6>[    0.268419] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<4>[    0.308914] CPU2: Booted secondary processor
<6>[    0.368418] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
<4>[    0.408923] CPU3: Booted secondary processor
<6>[    0.468418] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
<6>[    0.468470] Brought up 4 CPUs
<6>[    0.501518] SMP: Total of 4 processors activated (4089.72 BogoMIPS).
<6>[    0.511961] platform_device_register 356 devname=power
<6>[    0.517786] pinctrl core: initialized pinctrl subsystem
<6>[    0.523846] dummy: 
<4>[    0.526104] cma area[1], startpfn: 149504, endpfn: 192512
<4>[    0.531343] dev: 0xc078af90, startpfn: 149504, endpfn: 163840, sum: 14336, limit: 192512
<4>[    0.549316] dev: 0xc078af90
<4>[    0.551928] dma_contiguous_default_area: 0xef03f380
<4>[    0.556867] dump_cma_pageblocks: 
<4>[    0.560270] block[0], startpfn: 149504, endpfn: 192511
<4>[    0.565447] CMA free mem size: 172032kb
<4>[    0.569363] 
<4>[    0.570908] cma_reserve_reserved.dev: 0xc078af90
<4>[    0.575588] cma_reserve_reserved.start_pfn: 0x00024800
<4>[    0.580800] cma_reserve_reserved.end_pfn: 0x00028000
<4>[    0.585986] cma_reserve_reserved.limit_pfn: 0x0002f000
<4>[    0.591028] cma_reserve_reserved.sum_pages: 0x00003800
<6>[    0.596598] NET: Registered protocol family 16
<6>[    0.623139] DMA: preallocated 1024 KiB pool for atomic coherent allocations
<4>[    0.632284] leopard_board_init()
<4>[    0.635414] asoc_board_pinmux_init()
<6>[    0.639002] platform_device_register 356 devname=pinctrl-asoc
<4>[    0.645185] asoc_uart_platform_data_init()
<3>[    0.649243] [get_config]NOT find item:uart2_port.use_dma_tx
<3>[    0.654864] [get_config]NOT find item:uart2_port.use_dma_rx
<3>[    0.660514] [get_config]NOT find item:uart2_port.rx_poll_rate
<3>[    0.666387] [get_config]NOT find item:uart2_port.rx_timeout
<3>[    0.671954] [get_config]NOT find item:uart3_port.use_dma_tx
<3>[    0.677568] [get_config]NOT find item:uart3_port.use_dma_rx
<3>[    0.683219] [get_config]NOT find item:uart3_port.rx_poll_rate
<3>[    0.689108] [get_config]NOT find item:uart3_port.rx_timeout
<6>[    0.694599] platform_device_register 356 devname=asoc-serial
<6>[    0.700488] platform_device_register 356 devname=asoc-serial
<6>[    0.706354] platform_device_register 356 devname=asoc-serial
<6>[    0.712086] platform_device_register 356 devname=asoc-mmc0
<6>[    0.717691] platform_device_register 356 devname=asoc-mmc1
<6>[    0.723406] platform_device_register 356 devname=arm-pmu
<6>[    0.728775] platform_device_register 356 devname=wlan_pm_dev
<4>[    0.734651] asoc_gpio_init()
<6>[    0.737675] gpiochip_add: registered GPIOs 0 to 117 on device: asoc-gpio-chip
<4>[    0.745085] asoc_spi_devices_init()
<6>[    0.748513] hw-breakpoint: found 2 (+1 reserved) breakpoint and 1 watchpoint registers.
<6>[    0.756447] hw-breakpoint: maximum watchpoint size is 4 bytes.
<4>[    0.762453] asoc_common_init()
<6>[    0.765463] platform_device_register 356 devname=ion-asoc
<6>[    0.771170] platform_device_register 356 devname=act_fb
<6>[    0.776602] platform_device_register 356 devname=pvrsrvkm
<4>[    0.782096] [asoc] dma clock rate 192000000
<6>[    0.786287] [PowerGate] init
<6>[    0.789483] platform_device_register 356 devname=asoc-pwm
<6>[    0.794940] platform_device_register 356 devname=asoc-pwm
<6>[    0.800402] platform_device_register 356 devname=asoc-pwm
<6>[    0.806003] platform_device_register 356 devname=asoc-pwm
<6>[    0.811461] platform register pwm driver: asoc-pwm
<4>[    0.816366] init_leopard_pads,660
<4>[    0.819562] leopard_pinctrl_probe
<4>[    0.822875] Actions pinctrl probe
<6>[    0.826439] asoc_pinmux_endisable(enable:1) function:6 'lvds', group:7 'lvds'
<6>[    0.833565] asoc_pinmux_endisable(enable:1) function:18 'spi1', group:21 'spi1'
<6>[    0.841008] asoc_pinmux_endisable(enable:1) function:15 'sens1', group:18 'sens1'
<6>[    0.848360] asoc_pinmux_endisable(enable:1) function:9 'pwm', group:10 'pwm01_ksin02'
<6>[    0.856433] asoc_pinmux_endisable(enable:1) function:9 'pwm', group:12 'pwm2_ksout2'
<6>[    0.864061] asoc_pinmux_endisable(enable:1) function:9 'pwm', group:11 'pwm123_ksin3out0out1'
<6>[    0.872640] asoc_pinmux_endisable(enable:1) function:21 'uart2', group:23 'uart2'
<6>[    0.880329] pinctrl-asoc pinctrl-asoc: initialized Actions SOC pin control driver
<4>[    0.889066] [SIRQ] init sirqs
<6>[    0.892776] platform_device_register 356 devname=asoc-i2c
<6>[    0.898240] platform_device_register 356 devname=asoc-i2c
<3>[    0.903889] [get_config]NOT find item:i2c.i2c1_freq
<4>[    0.908642] i2c: use no fifo mode for hdmi hdcp
<3>[    0.913689] [get_config]NOT find item:i2c.i2c2_freq
<4>[    0.918607] i2c: use no fifo mode for hdmi hdcp
<6>[    0.923528] asoc_spi: driver initialized
<4>[    0.927628] asoc_spi: add controller devices()
<3>[    0.932213] [get_config]NOT find item:spi1_cfg.use_dma
<3>[    0.937296] [get_config]NOT find item:spi1_cfg.rt
<6>[    0.942120] platform_device_register 356 devname=asoc_spi
<6>[    0.948016] spi spi1.0: setup: 2000000 Hz bpw 8 mode 0x3 for cs 0(gpio 4294967295)
<6>[    0.955762] atc260x_spi_probe()
<4>[    0.959054] 
<4>[    0.959059]  atc260x_get_version val:7[ATC260X] found atc260x connected (version: D)
<6>[    0.968344] atc260x spi1.0: atc260x_irq_init(irq:88) irq_base:207
<4>[    0.978255] [ATC260X] Probing DCDC1
<6>[    0.982081] vddcore: 700 <--> 1400 mV at 1100 mV 
<4>[    0.987185] [ATC260X] Probing DCDC2
<6>[    0.991053] vddr: 1400 <--> 2200 mV at 1550 mV 
<4>[    0.995891] [ATC260X] Probing DCDC3
<6>[    0.999661] vcc: 2600 <--> 3100 mV at 3100 mV 
<4>[    1.004500] [ATC260X] Probing DCDC4 (5v)
<6>[    1.008704] vcc5v: 5000 mV 
<4>[    1.012108] [ATC260X] Probing LDO1
<6>[    1.015836] avcccore: 2600 <--> 3300 mV at 2900 mV 
<4>[    1.021151] [ATC260X] Probing LDO2
<6>[    1.024874] avccpmic: 2600 <--> 3300 mV at 3100 mV 
<4>[    1.029980] [ATC260X] Probing LDO3
<6>[    1.033695] vddpmic: 1500 <--> 2000 mV at 1800 mV 
<4>[    1.038814] [ATC260X] Probing LDO4
<6>[    1.042534] LDO4: 2800 <--> 3500 mV at 3100 mV 
<4>[    1.047373] [ATC260X] Probing LDO5
<6>[    1.050964] LDO5: 2600 <--> 3300 mV at 3300 mV 
<4>[    1.055810] [ATC260X] Probing LDO6
<6>[    1.059600] avddcore: 700 <--> 1400 mV at 1200 mV 
<4>[    1.064740] [ATC260X] Probing LDO7
<6>[    1.068584] LDO7: 1500 <--> 2000 mV at 1800 mV 
<4>[    1.073332] [ATC260X] Probing LDO8
<6>[    1.077081] LDO8: 2300 <--> 3300 mV at 3100 mV 
<4>[    1.081949] [ATC260X] Probing LDO9
<6>[    1.085676] LDO9: 1000 <--> 1500 mV at 1200 mV 
<4>[    1.090450] [ATC260X] Probing LDO10
<6>[    1.094194] LDO10: 2300 <--> 3300 mV at 3100 mV 
<4>[    1.099070] [ATC260X] Probing LDO11
<6>[    1.102800] svcc: 2600 <--> 3300 mV at 3100 mV 
<4>[    1.107630] [ATC260X] Probing Switch/LDO1
<4>[    1.111637] 
<4>[    1.111641]  atc260x_get_version val:7
<6>[    1.117278] Switch LDO1: 3000 <--> 3300 mV at 3000 mV 
<6>[    1.162363] bio: create slab <bio-0> at 0
<5>[    1.167925] SCSI subsystem initialized
<6>[    1.172144] usbcore: registered new interface driver usbfs
<6>[    1.177844] usbcore: registered new interface driver hub
<6>[    1.183413] usbcore: registered new device driver usb
<6>[    1.189112] Linux video capture interface: v2.00
<6>[    1.194667] Advanced Linux Sound Architecture Driver Version 1.0.25.
<6>[    1.202269] Bluetooth: Core ver 2.16
<6>[    1.205870] NET: Registered protocol family 31
<6>[    1.210365] Bluetooth: HCI device and connection manager initialized
<6>[    1.216673] Bluetooth: HCI socket layer initialized
<6>[    1.221539] Bluetooth: L2CAP socket layer initialized
<6>[    1.226755] Bluetooth: SCO socket layer initialized
<6>[    1.232287] cfg80211: Calling CRDA to update world regulatory domain
<6>[    1.240327] Switching to clocksource timer0
<6>[    1.266099] NET: Registered protocol family 2
<6>[    1.270730] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    1.278527] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>[    1.289128] TCP bind hash table entries: 65536 (order: 8, 1572864 bytes)
<6>[    1.300549] TCP: Hash tables configured (established 131072 bind 65536)
<6>[    1.307095] TCP: reno registered
<6>[    1.310382] UDP hash table entries: 512 (order: 3, 32768 bytes)
<6>[    1.316377] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes)
<6>[    1.323287] NET: Registered protocol family 1
<6>[    1.327997] Trying to unpack rootfs image as initramfs...
<6>[    1.360435] Freeing initrd memory: 2464K
<6>[    1.365418] asoc_serial: detected port #2
<6>[    1.369299] asoc-serial.2: ttyS2 at MMIO 0xf8164000 (irq = 62) is a ASOC_SERIAL
<6>[    1.377226] asoc_serial: detected port #3
<6>[    1.381161] asoc-serial.3: ttyS3 at MMIO 0xf8166000 (irq = 63) is a ASOC_SERIAL
<6>[    1.388996] asoc_serial: detected port #5
<6>[    1.392930] asoc-serial.5: ttyS5 at MMIO 0xf816a000 (irq = 65) is a ASOC_SERIAL
<6>[    1.400390] asoc_serial: console setup on port #5
<6>[    1.405191] console [ttyS5] enabled, bootconsole disabled
<6>[    1.416387] asoc_serial: driver initialized
<1>[    1.420560] PROC DMA INIT
<6>[    1.423526] timer_monitor_init
<6>[    1.426593] platform_device_register 356 devname=timer_monitor
<6>[    1.432782] twohz_start: start timer monitor
<4>[    1.437337] [ATC260X] Probing PM
<7>[    1.440553] [PM] set pmic suspend ops
<7>[    1.441118] [ATC260X PM]: wakeup_mask 7ff, wakeup_src 706
<4>[    1.441531] 
<4>[    1.441535]  #####atc260x_pm_probe atc2603_PMU_SYS_CTL0:0xe0d5 ####[ATC260X] probe On/Off key
<6>[    1.452640] input: atc260x_onoff as /devices/platform/asoc_spi.1/spi_master/spi1/spi1.0/atc260x-onoff/input/input0
<4>[    1.463365] cpu idle drv->state_count 1, cpuidle_register_driver: 0xc038bcac
<6>[    1.471847] audit: initializing netlink socket (disabled)
<5>[    1.477300] type=2000 audit(1.440:1): initialized
<4>[    1.483696] highmem bounce pool size: 64 pages
<6>[    1.514586] ROMFS MTD (C) 2007 Red Hat, Inc.
<6>[    1.519219] fuse init (API version 7.18)
<6>[    1.524204] exFAT: Core Version 1.1.11p1(13-FEB-2013)
<6>[    1.529271] exFAT: FS Version 1.1.11p1(13-FEB-2013)
<6>[    1.534565] msgmni has been set to 1482
<6>[    1.539978] io scheduler noop registered
<6>[    1.543890] io scheduler deadline registered
<6>[    1.548630] io scheduler cfq registered (default)
<6>[    1.553322] start plist test
<6>[    1.561697] end plist test
<6>[    1.581310] brd: module loaded
<6>[    1.592326] loop: module loaded
<6>[    1.596429] tun: Universal TUN/TAP device driver, 1.6
<6>[    1.601466] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
<6>[    1.607942] PPP generic driver version 2.4.2
<6>[    1.612679] PPP BSD Compression module registered
<6>[    1.617391] PPP Deflate Compression module registered
<6>[    1.623304] PPP MPPE Compression module registered
<6>[    1.628109] NET: Registered protocol family 24
<6>[    1.632955] usbcore: registered new interface driver cdc_acm
<6>[    1.638621] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[    1.646888] usbcore: registered new interface driver cdc_wdm
<6>[    1.652534] Initializing USB Mass Storage driver...
<6>[    1.657670] usbcore: registered new interface driver usb-storage
<6>[    1.663662] USB Mass Storage support registered.
<6>[    1.668745] usbcore: registered new interface driver usbserial
<6>[    1.674581] usbserial: USB Serial Driver core
<6>[    1.679493] mousedev: PS/2 mouse device common for all mice
<6>[    1.687390] device-mapper: uevent: version 1.0.3
<6>[    1.692678] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
<6>[    1.701361] cpuidle: using governor ladder
<6>[    1.705724] cpuidle: using governor menu
<6>[    1.711716] usbcore: registered new interface driver usbhid
<6>[    1.717294] usbhid: USB HID core driver
<6>[    1.721946] ashmem: initialized
<6>[    1.725390] logger: created 256K log 'log_main'
<6>[    1.730174] logger: created 256K log 'log_events'
<6>[    1.735150] logger: created 256K log 'log_radio'
<6>[    1.740034] logger: created 256K log 'log_system'
<4>[    1.745558] ASoC: Failed to create debugfs directory
<6>[    1.751508] u32 classifier
<6>[    1.754206]     Actions configured
<6>[    1.757617] Netfilter messages via NETLINK v0.30.
<6>[    1.762397] nf_conntrack version 0.5.0 (15840 buckets, 63360 max)
<6>[    1.769516] ctnetlink v0.93: registering with nfnetlink.
<6>[    1.774919] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[    1.781863] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[    1.788247] xt_time: kernel timezone is -0000
<6>[    1.793169] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    1.798855] arp_tables: (C) 2002 David S. Miller
<6>[    1.803548] TCP: cubic registered
<6>[    1.806874] Initializing XFRM netlink socket
<6>[    1.813184] NET: Registered protocol family 10
<6>[    1.818822] Mobile IPv6
<6>[    1.821327] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[    1.827011] IPv6 over IPv4 tunneling driver
<6>[    1.833978] NET: Registered protocol family 17
<6>[    1.838481] NET: Registered protocol family 15
<6>[    1.843067] Bluetooth: RFCOMM TTY layer initialized
<6>[    1.847975] Bluetooth: RFCOMM socket layer initialized
<6>[    1.853100] Bluetooth: RFCOMM ver 1.11
<6>[    1.856853] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[    1.862149] Bluetooth: BNEP filters: protocol multicast
<6>[    1.867376] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[    1.873576] lib80211: common routines for IEEE802.11 drivers
<7>[    1.879243] lib80211_crypt: registered algorithm 'NULL'
<7>[    1.879258] lib80211_crypt: registered algorithm 'WEP'
<7>[    1.879271] lib80211_crypt: registered algorithm 'CCMP'
<7>[    1.879284] lib80211_crypt: registered algorithm 'TKIP'
<6>[    1.879569] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
<6>[    1.887271] platform_device_register 356 devname=leopard-dynamic-cpu-hotplug
<4>[    1.894737] init_threshold,139,size:0x28
<4>[    1.898648] leopard PM-hotplug init function
<6>[    1.902949] [PM] ASOC Power Management
<7>[    1.906955] [ATC260X PM]: wakeup_mask 7ff, wakeup_src 706
<7>[    1.908348] PM: Checking hibernation image partition swap
<7>[    1.908375] PM: Hibernation image not present or could not be loaded.
<4>[    1.908566] Switch LDO1: incomplete constraints, leaving on
<4>[    1.914127] svcc: incomplete constraints, leaving on
<4>[    1.919316] LDO8: incomplete constraints, leaving on
<4>[    1.924340] avddcore: incomplete constraints, leaving on
<4>[    1.929802] vddpmic: incomplete constraints, leaving on
<4>[    1.935033] avccpmic: incomplete constraints, leaving on
<4>[    1.940331] avcccore: incomplete constraints, leaving on
<4>[    1.945714] vcc: incomplete constraints, leaving on
<3>[    1.950791] /home2/yuyonghui/5202c/TAG_140422_BF2__TAG_GS702C_4420_140411/leopard/kernel/linux-3.4/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<6>[    1.964709] ALSA device list:
<6>[    1.967663]   No soundcards found.
<6>[    1.971628] Freeing init memory: 180K
<3>[    3.361179] init: could not import file 'init.mt6620.rc' from '/init.gs702c.rc'
<4>[    3.369701] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<4>[    3.390129] find ksyms user_dump_stack!
<4>[    3.394282] find ksyms asoc_get_dvfslevel!
<4>[    3.398396] c&d_ftl_Jul 21 2014_16:24:12
<4>[    3.402310] (CMU_NANDPLL=0x00000120, CMU_NANDCCLK=0x00000001
<4>[    3.418707] __CheckChipIdAndTable 202: nandId[0]=4b04882c, nandId[1]=a9
<4>[    3.427776] Read mbrc successfully
<4>[    3.431190] afi config: ce=0x4000000, clk=0, paddrv=0x0, extraEccMode=0, noBatteryMode=0, downGradeMode=0, BadBlockRunRec=0, nandReserved=0x00000001
<4>[    3.444535] ChipCnt = 1, ChipBitMap 0x0
<4>[    3.448593] CMU_NANDPLL=120, CMU_NANDCCLK=1
<4>[    3.452835] PDL_ConfigInfo.PadDrvLevel==0, use default level 3
<4>[    3.458758] __NandInit 445
<4>[    3.461530] l_dvfslevel=0x7029: (PAD_CTL=0x00000002, NAND_ANALOG_CTL=0x02053333, PAD_PULLCTL2=0x000007d0, MFP_CTL3=0x00940000
<4>[    3.472872] (CMU_NANDPLL=0x00000120, CMU_NANDCCLK=0x00000001
<4>[    3.478612] (NAND_CTL=0x00000000, NAND_DMA_ADDR=0x241bc000, NAND_DMA_CTL=0x20002000
<4>[    3.502361] Bad Block List:
<4>[    3.505022] die0: 30 31 42 43 46 47 90 91
<4>[    3.509302] Total block 4096,bad block 8.
<6>[    3.513632] asoc_register_secure_storage: register nand
<4>[    3.543484] dieNum              =1
<4>[    3.546929] blkNumPerDie        =2020
<4>[    3.550580] reserveBlkNumPerDie =60
<4>[    3.554053] pageNumPerBlk       =256
<4>[    3.557639] pageNumPerSecureBlk =256
<4>[    3.561204] orderBlkNum         =1
<4>[    3.564605] unsafeMode          =0
<4>[    3.567993] noBatteryMode       =0
<4>[    3.571379] pageSize            =16384
<4>[    3.575124] maxRRCount          =0
<4>[    3.578512] ECCBitNum           =24
<4>[    3.581985] eraseLimit          =3000
<4>[    3.585650] readLimit           =100000
<4>[    3.589472] partitionNum        =11
<6>[    3.606865] io scheduler nand_elevator registered
<4>[    3.613928] permitTimes=20
<4>[    3.616872] acta sectors=98304
<4>[    3.619914] permitTimes=16
<4>[    3.622779] actb sectors=98304
<4>[    3.625964] permitTimes=12
<4>[    3.628857] actc sectors=1572864
<4>[    3.632071] permitTimes=8
<4>[    3.634898] actd sectors=4194304
<4>[    3.638113] permitTimes=4
<4>[    3.640929] acte sectors=131072
<4>[    3.644059] permitTimes=1
<4>[    3.646867] actj sectors=25493504
<4>[    3.650168] permitTimes=1
<4>[    3.652948] actk sectors=524288
<6>[    3.657769]  acta:
<6>[    3.661714]  actb:
<6>[    3.665716]  actc: unknown partition table
<6>[    3.671693]  actd: unknown partition table
<6>[    3.677721]  acte: unknown partition table
<6>[    3.683628]  actj:
<6>[    3.686954]  actk: unknown partition table
<6>[    3.691477] platform_device_register 356 devname=ddl_pm
<6>[    3.712534] platform_device_register 356 devname=act_de
<4>[    3.718673] de init in boot 
<3>[    3.727177] [get_config]NOT find item:lcd.physical_area
<3>[    3.733071] [get_config]NOT find item:lcd.rb_swap
<3>[    3.737880] [get_config]NOT find item:lcd.dsi_ctrl
<3>[    3.742713] [get_config]NOT find item:lcd.dsi_size
<3>[    3.747664] [get_config]NOT find item:lcd.dsi_rgbht0
<3>[    3.752666] [get_config]NOT find item:lcd.dsi_rgbht1
<3>[    3.757691] [get_config]NOT find item:lcd.dsi_rgbvt0
<3>[    3.762690] [get_config]NOT find item:lcd.dsi_rgbvt1
<3>[    3.767705] [get_config]NOT find item:lcd.dsi_pack_cfg
<3>[    3.772883] [get_config]NOT find item:lcd.dsi_pack_header
<3>[    3.778331] [get_config]NOT find item:lcd.dsi_vedio_cfg
<3>[    3.783589] [get_config]NOT find item:lcd.dsi_phy_t0
<3>[    3.788749] [get_config]NOT find item:lcd.dsi_phy_t1
<3>[    3.793752] [get_config]NOT find item:lcd.dsi_phy_t2
<3>[    3.798780] [get_config]NOT find item:lcd.dsi_init
<3>[    3.807279] [get_config]NOT find item:hardware.version
<4>[    3.812408] [get_config]NOT find item:hardware.version
<3>[    3.817879] [get_config]NOT find item:lcd.physical_area
<3>[    3.823771] [get_config]NOT find item:lcd.rb_swap
<3>[    3.828685] [get_config]NOT find item:lcd.dsi_ctrl
<3>[    3.833519] [get_config]NOT find item:lcd.dsi_size
<3>[    3.838378] [get_config]NOT find item:lcd.dsi_rgbht0
<3>[    3.843378] [get_config]NOT find item:lcd.dsi_rgbht1
<3>[    3.848398] [get_config]NOT find item:lcd.dsi_rgbvt0
<3>[    3.853397] [get_config]NOT find item:lcd.dsi_rgbvt1
<3>[    3.858417] [get_config]NOT find item:lcd.dsi_pack_cfg
<3>[    3.863595] [get_config]NOT find item:lcd.dsi_pack_header
<3>[    3.869101] [get_config]NOT find item:lcd.dsi_vedio_cfg
<3>[    3.874361] [get_config]NOT find item:lcd.dsi_phy_t0
<3>[    3.879389] [get_config]NOT find item:lcd.dsi_phy_t1
<3>[    3.884389] [get_config]NOT find item:lcd.dsi_phy_t2
<3>[    3.889409] [get_config]NOT find item:lcd.dsi_init
<4>[    3.894190] [get_config]NOT find item:lcd.physical_area
<4>[    3.902690] fbmem res c078b160, start 3f100000, end 3fffffff
<4>[    3.902700]  
<3>[    3.909889] [get_config]NOT find item:fb_info.fb_cfg
<4>[    3.915065] fb config info read failed used default cofnig 
<4>[    3.920733] fb_cfg.rotate ~~~~~~~~~~~~~~~~~~~~~~ = 2 fbdev info size f00000  phys 3f100000 base f1000000
<4>[    3.930581] sizeof(struct act_fb_info) = 28 
<4>[    3.930588]  sizeof(struct act_fb_info) = 28 
<4>[    3.936262]  display = bf0d67b8 display->disp_cur_mode = bf0d609c 
<4>[    3.945453] display = bf0d67b8 display->disp_cur_mode = bf0d609c 
<3>[    3.952518] [get_config]NOT find item:hdmi.lighteness1
<3>[    3.957724] [get_config]NOT find item:hdmi.saturation1
<3>[    3.962882] [get_config]NOT find item:hdmi.contrast1
<3>[    3.967918] [get_config]NOT find item:lcd.lighteness
<3>[    3.972925] [get_config]NOT find item:lcd.saturation
<3>[    3.977945] [get_config]NOT find item:lcd.contrast
<3>[    3.986138] init: /dev/hw_random not found
<3>[    3.990815] init: cannot open '/initlogo.rle'
<3>[    3.996417] init: 
<3>[    3.996425]  failed to mount cgroup none /acct   ret=-1 errnostr=No such device 
<3>[    3.996433]  
<3>[    4.007600] init: 
<3>[    4.007607]  failed to mount tmpfs none /sys/fs/cgroup   ret=-1 errnostr=No such file or directory 
<3>[    4.007616]  
<3>[    4.020357] init: 
<3>[    4.020363]  failed to mount cgroup none /sys/fs/cgroup/memory   ret=-1 errnostr=No such file or directory 
<3>[    4.020373]  
<3>[    4.036470] init: 
<3>[    4.036476]  failed to mount cgroup none /dev/cpuctl   ret=-1 errnostr=No such device 
<3>[    4.036485]  
<6>[    4.058102] EXT4-fs (actc): mounted filesystem without journal. Opts: noauto_da_alloc
<7>[    4.082225] EXT4-fs (actd): ext4_orphan_cleanup: deleting unreferenced inode 114902
<6>[    4.085457] EXT4-fs (actd): 1 orphan inode deleted
<6>[    4.090238] EXT4-fs (actd): recovery complete
<6>[    4.129598] EXT4-fs (actd): mounted filesystem with ordered data mode. Opts: nodelalloc,discard
<6>[    4.316756] EXT4-fs (actd): mounted filesystem with ordered data mode. Opts: nodelalloc,discard
<6>[    4.334772] EXT4-fs (acte): mounted filesystem with ordered data mode. Opts: nodelalloc
<6>[    4.470092] EXT4-fs (acte): mounted filesystem with ordered data mode. Opts: nodelalloc
<3>[    4.478397] init: 
<3>[    4.478405]  failed to mount vfat /dev/block/actg /mnt/media   ret=-1 errnostr=No such file or directory 
<3>[    4.478415]  
<3>[    4.491791] init: 
<3>[    4.491797]  failed to mount vfat /dev/block/acth /vendor/app   ret=-1 errnostr=No such file or directory 
<3>[    4.491807]  
<4>[    4.511792] miscinfo init Apr 16 2014 13:05:31, key count 10
<4>[    4.517465] [MISC INFO] getMiscInfoLite 
<4>[    4.521377] [MISCINFO] buf ef3b1c00, len:1024
<4>[    4.525778] OPEN FILE ERROR!!
<4>[    4.528733] [MISC_INFO] wifi mac read error, modules closed?
<4>[    4.534374] 
<4>[    4.535913] misc info read type=3, size=32
<4>[    4.540011] can not find info block with flag 0x4d495343
<4>[    4.545325] virnand error: can not find 0x4d495343 info block
<4>[    4.551054] virnand error: read misc info failed
<3>[    4.555672] asoc_read_secure_storage_data: faild to read secure storage, ret -1
<4>[    4.562961] read sn/devnum failed
<4>[    4.566272] 
<4>[    4.567755] misc info read type=4, size=4096
<4>[    4.572012] can not find info block with flag 0x4d495343
<4>[    4.577347] virnand error: can not find 0x4d495343 info block
<4>[    4.583075] virnand error: read misc info failed
<3>[    4.587692] asoc_read_secure_storage_data: faild to read secure storage, ret -1
<4>[    4.594994] data read error
<4>[    4.597774] read EXTENSION failed
<4>[    4.601072] 
<4>[    4.602555] misc info read type=4, size=4096
<4>[    4.606824] can not find info block with flag 0x4d495343
<4>[    4.612120] virnand error: can not find 0x4d495343 info block
<4>[    4.617867] virnand error: read misc info failed
<3>[    4.622471] asoc_read_secure_storage_data: faild to read secure storage, ret -1
<4>[    4.629774] data read error
<4>[    4.632552] read EXTENSION failed
<4>[    4.635869] misc info read type=4, size=4096
<4>[    4.640125] can not find info block with flag 0x4d495343
<4>[    4.645434] virnand error: can not find 0x4d495343 info block
<4>[    4.651163] virnand error: read misc info failed
<3>[    4.655780] asoc_read_secure_storage_data: faild to read secure storage, ret -1
<4>[    4.663070] data read error
<4>[    4.665868] read EXTENSION failed
<4>[    4.669170] miscinfo_sysfs_init
<6>[    4.674443] gl5201_adckey_drv: [atc260x_adckeypad_probe start]
<6>[    4.680325] gl5201_adckey_drv: [atc260x_adckeypad_probe]get keymap  (adckey.key1_map) success! 0--(left:right:value)=(0:0:102)
<6>[    4.691723] gl5201_adckey_drv: [atc260x_adckeypad_probe]get keymap  (adckey.key2_map) success! 1--(left:right:value)=(50:150:139)
<6>[    4.703381] gl5201_adckey_drv: [atc260x_adckeypad_probe]get keymap  (adckey.key3_map) success! 2--(left:right:value)=(151:250:115)
<6>[    4.715136] gl5201_adckey_drv: [atc260x_adckeypad_probe]get keymap  (adckey.key4_map) success! 3--(left:right:value)=(251:350:114)
<6>[    4.726880] gl5201_adckey_drv: [atc260x_adckeypad_probe]get keymap  (adckey.key5_map) success! 4--(left:right:value)=(351:450:158)
<6>[    4.738627] gl5201_adckey_drv: [atc260x_adckeypad_probe]get keymap  (adckey.key6_map) success! 5--(left:right:value)=(451:550:0)
<6>[    4.750198] gl5201_adckey_drv: [atc260x_adckeypad_probe]get keymap  (adckey.key7_map) success! 6--(left:right:value)=(590:690:0)
<6>[    4.761769] gl5201_adckey_drv: [atc260x_adckeypad_probe]get keymap  (adckey.key8_map) success! 7--(left:right:value)=(691:700:0)
<6>[    4.773341] gl5201_adckey_drv: [atc260x_adckeypad_probe]get keymap  (adckey.key9_map) success! 8--(left:right:value)=(701:1024:103)
<6>[    4.785777] input: atc260x-adckeypad as /devices/platform/asoc_spi.1/spi_master/spi1/spi1.0/atc260x-adckeypad/input/input1
<6>[    4.797518] gl5201_adckey_drv: [in atc260x_adckeypad_probe]ret = 0
<6>[    4.803899] gl5201_adckey_drv: open:AuxADC_CTL0 = 0xffff
<6>[    4.809249] gl5201_adckey_drv: [atc260x_adckeypad_probe finish]
<4>[    4.819416] [poewr] atc260x_power version: 20140402-103738
<4>[    5.135008] check_bat_online bat_v:4131, exist:1024
<4>[    5.142319] create  boot_cap_threshold_attr file success!
<4>[    5.147799] create  charger_online_attr file success!
<4>[    5.153385] 
<4>[    5.153391]  atc260x_get_version val:7atc260x_power_probe, 2065, bl_on_current_usb_pc: 2 
<4>[    5.163316] atc260x_power_probe, 2066, bl_off_current_usb_pc: 3 
<4>[    5.169359] atc260x_power_probe, 2067, bl_on_current_usb_adp: 2 
<4>[    5.175387] atc260x_power_probe, 2068, bl_off_current_usb_adp: 6 
<4>[    5.181465] atc260x_power_probe, 2069, bl_on_current_wall_adp: 2 
<4>[    5.187588] atc260x_power_probe, 2070, bl_off_current_wall_adp: 11 
<4>[    5.193972] [power]support adaptor type: 3
<4>[    5.198139] [power]boot_cap_threshold: 3
<4>[    5.202101] [power]change_current_temp: 0
<4>[    5.206175] [power]ot_shutoff_enable: 0
<4>[    5.210020] 
<4>[    5.210025] [power] get led gpio failed!
<4>[    5.215273] [power] get charge control gpio failed!atc260x_power_probe: PWM_CTL2:8500
<4>[    5.525003] check_bat_online bat_v:4131, exist:1024
<4>[    5.529866] 
<4>[    5.529870] [power] Battery detectedatc260x_bat_charger_init,atc2603_PMU_APDS_CTL:e5fe
<4>[    5.542634] [ATC260X] Probing RTC
<6>[    5.548008] atc260x-rtc atc260x-rtc: rtc core: registered atc260x as rtc0
<4>[    5.558779] vddcore: Failed to create debugfs directory
<4>[    5.564011] avddcore: Failed to create debugfs directory
<3>[    5.569720] [get_config]NOT find item:powersave.mode
<6>[    5.578334] platform_device_register 356 devname=dummy_udc
<6>[    5.602989] android_usb gadget: Number of LUNs=2
<6>[    5.607648]  lun0: LUN: removable file: (no medium)
<6>[    5.612532]  lun1: LUN: removable file: (no medium)
<6>[    5.618420] android_usb gadget: android_usb ready
<3>[    5.633350] [get_config]NOT find item:usb2_ports.ports_config
<4>[    5.639146] [get_config]NOT find item:usb2_ports
<4>[    5.643769] usb gpio vbus get pre_cfg failed, use wifi33 ldo!
<4>[    5.649533] usb gpio vbus get pre_cfg failed, use wifi33 ldo!
<3>[    5.655524] [get_config]NOT find item:usb2_ports.port0_host_plug_detect
<3>[    5.662163] [get_config]NOT find item:usb2_ports.port1_host_plug_detect
<4>[    5.675212] use new usb2+usb controller!
<6>[    5.684113] platform_device_register 356 devname=usb_monitor
<4>[    5.690319] get_usb_hc_type ASOC_GET_IC(dvfslevel)=0x7029
<3>[    5.696758] [get_config]NOT find item:umonitor.detect_type
<0>[    5.702228] umonitor, use default config!
<4>[    5.706306] otgvbus_gpio:19
<4>[    5.710949] [ATC260X] probe sound
<6>[    5.720685] sndrv driver for Sound I/O.
<4>[    5.725314] sndrv: device actsnd--1 detected!
<4>[    5.730459] sndrv: driver for actsnd.0 (14,0) registered
<4>[    5.736901] sndrv: malloc size = 0X4000, buf = 0XE4900000, phy = 0X24900000
<4>[    5.745182] sndrv: malloc size = 0X72000, buf = 0XE4904000, phy = 0X24904000
<4>[    5.752879] sndrv: create sysfs
<6>[    5.760015] platform_device_register 356 devname=mali0
<4>[    5.765901] device_create_file !
<4>[    5.769128] IC : 28713, LEVEL : 0
<4>[    5.772427] ####insmod vde(for 02C) driver successfully!
<3>[    5.780832] vce_drv_init ....
<6>[    5.783813] platform_device_register 356 devname=vce
<6>[    5.797600] usbcore: registered new interface driver option
<6>[    5.803418] USB Serial support registered for GSM modem (1-port)
<4>[    5.828853] 
<4>[    5.828860] mmc Host Driver, version 1.0 (r)
<4>[    5.828864] Compiled on May 12 2014 at 15:56:44
<3>[    5.839390] [get_config]NOT find item:card.detect_gpio_active
<3>[    5.845164] [get_config]NOT find item: CFG_CARD_SD0_DETECT_GPIO_ACTIVE -1 
<4>[    5.852036] acts_mmc_init,detect_gpio_active=46916
<4>[    5.856982] acts_mmc_init, sd0=1 detect_gpio:1 detect_irq:0 
<4>[    5.862623] acts_mmc_init: bootdev 0x0
<4>[    5.866393] acts_mmc_init, sd2=0 
<6>[    5.869709] platform_device_register 356 devname=asoc-mmc2
<4>[    5.875723] mmc SD0_SLOT added!
<4>[    5.878851] sd[0] : iobase[0xb0340000]
<3>[    5.882650] [get_config]NOT find item:hardware.version
<4>[    5.887821] hardware.version not config!
<6>[    5.892192] asoc_pinmux_endisable(enable:1) function:11 'sd0', group:14 'sd0'
<4>[    5.899368] acts_mmc_get_host_pin,1711,[pin_attr = 1],switch to host function!
<4>[    5.906651] error:detect_gpio_active:46916, check config.xml,defult set to 0
<4>[    5.913680] acts_mmc_probe,host->detect_gpio_active =0
<4>[    5.918856] MMC use GPIO_DETECT
<4>[    5.922392] mmc_rescan,2220,[detect type:1]
<4>[    5.926604] gpio level:1,gpio active :0
<4>[    5.927157] mmc SD1_SLOT(Wifi) added!
<4>[    5.927167] sd[1] : iobase[0xb0344000]
<6>[    5.927198] asoc_pinmux_endisable(enable:1) function:12 'sd1', group:15 'sd1'
<4>[    5.929829] [flash light] flash_light version: 1.0.0, 2013-6-05
<6>[    5.929841] platform_device_register 356 devname=flashlight
<3>[    5.930217] flashlight_probe: setup GPIO failed
<7>[    5.930477] Registered led device: flashlight
<6>[    5.961043] asoc_pinmux_endisable(enable:0) function:11 'sd0', group:14 'sd0'
<6>[    5.968372] asoc_pinmux_endisable(enable:1) function:24 'uart5', group:28 'uart5_sd0'
<4>[    5.976252] acts_mmc_get_serialport_pin,1690,[pin_attr = 0]switch to uart5 function!
<4>[    5.983933] [camera_detect] camera_detect version: 1.0.0, 2013-10-31
<6>[    5.983949] platform_device_register 356 devname=camera_detect
<4>[    5.984426] [camera_detect] camera.detect_enable :1
<4>[    5.984448] [camera_detect] camera.i2c_adap_id :2
<3>[    5.984735] [get_config]NOT find item:camera_detect_list.gc0311
<3>[    5.984771] [get_config]NOT find item:camera_detect_list.gc2145
<3>[    5.984884] [get_config]NOT find item:camera_detect_list.(null)
<3>[    5.984915] [get_config]NOT find item:camera_detect_list.(null)
<4>[    5.984936] [camera_detect] camera.avdd_use_ragulator :0
<4>[    5.984955] [camera_detect] camera.avdd_use_ldo :1
<4>[    5.984975] [camera_detect] camera.dvdd_use_ragulator :1
<4>[    5.984994] [camera_detect] camera.dvdd_use_ldo :0
<4>[    5.985014] [camera_detect] camera.dovdd_use_ragulator :0
<4>[    5.985034] [camera_detect] camera.dovdd_use_ldo :0
<3>[    5.985057] [get_config]NOT find item:camera.hot_plug_enable
<4>[    5.985065] [camera_detect] get camera.hot_plug_enable error!
<4>[    5.985077] [camera_detect] get_gpio_config 186, sensorf_pwdn pin num: 87
<4>[    5.985088] [camera_detect] get_gpio_config 197, sensorb_pwdn pin num: 88
<4>[    5.985099] [camera_detect] get_gpio_config 208, sensorf_reset pin num: 89
<4>[    5.985110] [camera_detect] get_gpio_config 220, sensor_avdd pin num: 18
<4>[    6.066607] [cap_gauge] atc260x_cap_gauge version: 1.0.1, 2013-5-29
<3>[    6.066811] [get_config]NOT find item:charger.i_charge_stop
<3>[    6.066850] [get_config]NOT find item:charger.battery_capacity
<4>[    6.066993] create sysfs for soft gauge
<4>[    6.067009] atc260x_cap_gauge_probe, 843, register early_suspend
<4>[    6.067102] 
<4>[    6.067105]  atc260x_get_version val:7
<4>[    6.067161]  atc260x_get_version val:7[cap_gauge] PMU version: 3
<4>[    6.091819] ==gsensor_detect_init==
<6>[    6.091834] platform_device_register 356 devname=gsensor_detect
<3>[    6.092586] [get_config]NOT find item:gsensor_detect_list.bma222
<4>[    6.092706] in gsensor_init.
<4>[    6.093169] Detect gsensor:bma222.
<4>[    6.093262] asoc_i2c: asoc_fifo_irq(): [i2c2] no ACK, fifostat 0x20013
<4>[    6.093270] 
<4>[    6.104697] asoc_i2c: asoc_fifo_irq(): [i2c2] no ACK, fifostat 0x20013
<4>[    6.104705] 
<4>[    6.124722] asoc_i2c: asoc_fifo_irq(): [i2c2] no ACK, fifostat 0x20013
<4>[    6.124733] 
<4>[    6.144611] bma222: read the chipid is: 0xfffffffa
<4>[    6.144622] Is not the gsensor:bma222,skip it.
<4>[    6.144631] Detect gsensor:stk8312.
<4>[    6.144767] Find u,u are:stk8312
<4>[    6.144783] in gsensor_deinit.
<6>[    6.166431] ===================STK_INIT==========================
<6>[    6.166879] stk831x_probe: driver version:1.6.1 2013/05/24
<4>[    6.166894] [STK831x][stk831x_probe][LINE:2254]Use Polling_mode
<4>[    6.166904] [STK831x][STK831X_Init][LINE:2842]<6>STK831X_Init: Initialize stk831x
<6>[    6.167911] input: stk8312 as /devices/virtual/input/input2
<3>[    6.176986] gsensor calibration file not exist!
<6>[    6.177001] stk831x_probe successfully
<4>[    6.239606] ==gsensor_detect_exit==
<6>[    6.243499] platform_device_unregister 373 devname=gsensor_detect
<6>[    6.250438] platform_device_unregister 376 devname=gsensor_detect 
<4>[    6.259737] vibrate.max_timeout:10000
<4>[    6.264348] vibrate.min_timeout:100
<4>[    6.267940] iogroup:0,pin_num:10,gpio_dir:0,active_level:1
<4>[    6.275766] ==ctp_detect_init==
<6>[    6.278995] platform_device_register 356 devname=ctp_detect
<4>[    6.285920] in ctp_detect_probe.
<4>[    6.289155] 
<4>[    6.289165] TP_USE_CONFIG
<4>[    6.293399] --------------------------
<4>[    6.297969]   tp_reset GPIOB3
<4>[    6.300938]   ctp_adapter 1
<4>[    6.303729] --------------------------
<4>[    6.307631]   ctp detect list: ICN83XX=1
<4>[    6.311642]   ctp detect list: GSLX6X0=1
<3>[    6.315842] [get_config]NOT find item:ctp_detect_list.GSL3675
<4>[    6.321589]   ctp detect list: GSL3675=1
<4>[    6.325633]   ctp detect list: FT52-406=1
<4>[    6.329716]   ctp detect list: FT5606=1
<4>[    6.333619]   ctp detect list: GT813=1
<4>[    6.337552]   ctp detect list: AW5206=0
<4>[    6.341464]   ctp detect list: AW5209=1
<4>[    6.345402]   ctp detect list: CT36X=0
<4>[    6.349207]   ctp detect list: HL3X06=0
<4>[    6.353104]   ctp detect list: ILITEK=1
<4>[    6.357175]   ctp detect list: MT395=0
<4>[    6.361006]   ctp detect list: NT1100X=0
<4>[    6.365106]   ctp detect list: SSD254X=1
<4>[    6.369201] vout->id = 1 !
<4>[    6.372024] layer_mgr->path_id = 1 layer_id = 3 
<4>[    6.377293] vout->id = 2 !
<4>[    6.380010] layer_mgr->path_id = 0 layer_id = 1 
<6>[    6.397546] platform_device_register 356 devname=asoc_hdmi
<6>[    6.403959] I2C_HDMI_EDID_DRV: [i2c_hdmi_init start]
<3>[    6.411627] [get_config]NOT find item:boot_disp_cfg.hdmi_cfg
<6>[    6.439154] -->rfkill_bluetooth_init
<6>[    6.443928] -->rfkill_bluetooth_probe
<6>[    6.447875] [BT-PLAT] GPIO22 is requested as BT_PWR_EN
<4>[    6.453862] bluetooth_set_power: block=1
<6>[    6.457937] [BT-PLAT] mt_bt_power_off ++:(0-0)
<6>[    6.531113] <--rfkill_bluetooth_probe
<3>[    6.571163] init: /dev/hw_random not found
<3>[    6.585508] init: persist.sys.shutok is init
<3>[    6.589822] init: signal_init, recoverywhencrash: 4.
<3>[    6.596076] init: signal_init, poweroffwhencrash not defined.
<3>[    6.602317] init: total=1980
<3>[    6.605086] init: value=1980
<3>[    6.608298] init: failed to open /data/system/entropy.dat
<3>[    6.627880] healthd: wakealarm_init: timerfd_create failed
<6>[    6.642079] binder: 1455:1455 transaction failed 29189, size 0-0
<3>[    6.692542] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
<3>[    6.701883] init: powerctl: cannot expand '${sys.powerctl}'
<3>[    6.708381] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
<3>[    6.720353] init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
<3>[    6.735662] android_usb: already disabled
<7>[    6.747156] adb_android_function_enable: 1 0
<7>[    6.747174] enable_store:  enable  2
<4>[    6.751204] adb_open, cnt:1
<6>[    6.754030] adb_bind_config
<6>[    6.928119] warning: `daemonsu' uses 32-bit capabilities (legacy support in use)
<6>[    6.950830] EXT4-fs (actc): re-mounted. Opts: (null)
<4>[    6.967918] we do not support cmd 4701 in nand drv ioctl!
<6>[    6.984945] EXT4-fs (actc): re-mounted. Opts: (null)
<6>[    7.113602] platform_device_register 356 devname=pvrsrvkm
<4>[    7.132398] act_fb_open device id = (1)
<4>[    7.132411] #####: Device 1: Framebuffer physical address: 0x3f808000
<4>[    7.143726] act_fb_open device id = (0)
<4>[    7.143752] #####: Device 0: Framebuffer physical address: 0x3f100000
<6>[    7.155773] EXT4-fs (actc): re-mounted. Opts: (null)
<6>[    7.210470] EXT4-fs (actc): re-mounted. Opts: (null)
<4>[    7.364674] in ctp_init.
<4>[    7.515298] ctp enter old board
<4>[    7.518495] ctp_detect,line:230.
<4>[    7.524292] asoc_i2c: asoc_fifo_irq(): [i2c1] no ACK, fifostat 0x3
<4>[    7.524306] 
<4>[    7.544852] asoc_i2c: asoc_fifo_irq(): [i2c1] no ACK, fifostat 0x3
<4>[    7.544863] 
<4>[    7.564855] asoc_i2c: asoc_fifo_irq(): [i2c1] no ACK, fifostat 0x3
<4>[    7.564866] 
<4>[    7.584953] read the chipid is:0xfffffffa
<4>[    7.588990] Is not the ctp:ICN83XX,skip it.
<4>[    7.593369] Find u,u are:GSLX6X0
<4>[    7.596858] in ctp_deinit.
<4>[    7.766275] ==ctp_detect_exit==
<4>[    7.769499] in ctp_detect_remove.
<6>[    7.773605] platform_device_unregister 373 devname=ctp_detect
<6>[    7.780012] platform_device_unregister 376 devname=ctp_detect 
<4>[    7.815256] ==gsl_ts_init==
<4>[    7.819606] ==gslX680_init 1355!!!!!!!!
<4>[    7.824728] GSLX680 Enter gsl_ts_probe
<4>[    7.828482] ==kzalloc success=
<4>[    7.831543] [GSLX680] Enter gslX680_ts_init
<6>[    7.838117] input: ft5x0x_ts as /devices/platform/asoc-i2c.1/i2c-1/1-0040/input/input3
<6>[    7.848796] cpufreq_interactive_input_connect: connect to ft5x0x_ts
<4>[    7.974908] I read reg 0xf0 is 0
<4>[    7.994999] I write reg 0xf0 0x12
<4>[    8.015000] I read reg 0xf0 is 0x12
<4>[    8.104375] act_fb_blank called blank is 0 
<4>[    8.104384]  act_fb_blank called blank is 0 
<4>[    8.110260]  act_fb_blank called blank is 0 
<4>[    8.115075]  act_fb_blank called blank is 0 
<4>[    8.119854]  act_fb_open device id = (0)
<4>[    8.161626] act_fb_open device id = (0)
<5>[    8.165742] dc_owl: CreateDCSwapChain: Device 0: Swap chain refCount 2
<4>[    8.172968] act_fb_open device id = (0)
<4>[    8.177038] act_fb_open device id = (1)
<4>[    8.184727] =============gsl_load_fw start==============
<4>[    8.240847] =====open
<4>[    8.246242] 
<4>[    8.246247] /home/liuzi/workspace/git/mid/actions/GS702C/GS702C_SDK_V5.1/GS702C_SDK_V5.0/GS702C_sdk/leopard/platform/drivers/usb/monitor/umonitor_core.c--691, SYS_MSG_USB_B_IN
<4>[    8.302449] adb wait event err:-512
<4>[    8.306855] adb_release, cnt:1
<4>[    8.310031] adb_closed_callback:  disable  0 1
<7>[    8.314784] <ADB TRACE> adb_closed_callback,360
<7>[    8.314802] <ADB TRACE> android_disable,253
<7>[    8.314817] <ADB TRACE> usb_remove_config,841
<7>[    8.314829] <ADB TRACE> remove_config,800
<7>[    8.314860] <ADB TRACE> remove_config,825
<4>[    8.608549] =====open
<4>[    8.816219] =============gsl_load_fw end==============
<4>[    8.965013] [GSLX680] End gsl_ts_probe
<4>[    8.969520] ret=0
<4>[    9.085993] [camera_list] module_detect_gc0308, 99, detect gc0308
<4>[    9.092101] [camera_detect] (gc0308), success!!!!!
<4>[    9.149890] [camera_list] module_detect_gc0308, 99, detect gc0308
<4>[    9.156038] [camera_detect] (gc0308), success!!!!!
<4>[    9.239797] [camera] camera_gc0308 version: 1.0.0, 2013-11-25
<4>[    9.245922] [camera] camera.avdd_use_ragulator :0
<4>[    9.250652] [camera] camera.avdd_use_ldo :1
<4>[    9.254951] [camera] camera.dvdd_use_ragulator :1
<4>[    9.259711] [camera] camera.dvdd_use_ldo :0
<4>[    9.263909] [camera] camera.dovdd_use_ragulator :0
<4>[    9.269084] [camera] camera.dovdd_use_ldo :0
<4>[    9.273349] [camera] get same config
<4>[    9.277055] [camera] camerab.h_mirror :0
<4>[    9.281009] [camera] camerab.v_flip :0
<3>[    9.284922] [get_config]NOT find item:camerab.auto_focus
<4>[    9.290533] [camera] get camerab.auto_focus error!
<3>[    9.295500] [get_config]NOT find item:camerab.always_power_on
<4>[    9.301251] [camera] get camerab.always_power_on error!
<3>[    9.306682] [get_config]NOT find item:camerab.no_avdd
<4>[    9.311971] [camera] get camerab.no_avdd error!
<3>[    9.316644] [get_config]NOT find item:camerab.gain_level
<4>[    9.321953] [camera] get camerab.gain_level error!
<4>[    9.326915] [camera] camerab.h_mirror :0
<4>[    9.330889] [camera] camerab.v_flip :0
<4>[    9.335111] [camera] cameraf.h_mirror :0
<4>[    9.339088] [camera] cameraf.v_flip :0
<4>[    9.342833] [camera] front mirror 0 flip 0; back mirror 0 flip 0
<4>[    9.348905] [camera] get_gpio_config 504, sensorf_pwdn pin num: 87
<4>[    9.355433] [camera] get_gpio_config 515, sensorb_pwdn pin num: 88
<4>[    9.361620] [camera] get_gpio_config 538, sensorb_reset pin num: 89
<4>[    9.367933] [camera] get_gpio_config 551, sensor_avdd pin num: 18
<4>[    9.374031] [camera] get_gpio_config 560, can't get flashlight_gpio gpio_cfg
<6>[    9.406055] platform_device_register 356 devname=camera_flag_device
<4>[    9.420758] <android_remove_audio_function 1046>.start
<6>[    9.426221] android_work: did not send uevent (0 0   (null))
<7>[    9.432860] <ADB TRACE> adb_cleanup,739
<6>[    9.435669] platform_device_register 356 devname=soc-camera-pdrv
<4>[    9.442931] i2c-core: driver [camera_gc0308] using legacy suspend method
<4>[    9.449858] i2c-core: driver [camera_gc0308] using legacy resume method
<6>[    9.465337] platform_device_unregister 373 devname=dummy_udc
<6>[    9.473086] platform_device_unregister 376 devname=dummy_udc 
<3>[    9.480074] [get_config]NOT find item:isp.enchance_drv
<6>[    9.487395] platform_device_register 356 devname=asoc_camera
<6>[    9.494117] soc-camera-pdrv soc-camera-pdrv.5: Probing soc-camera-pdrv.5
<6>[    9.512508] platform_device_register 356 devname=actions-dwc3
<4>[    9.549710] [gc0308] Product ID verified 9b
<4>[    9.559327] 1297
<4>[    9.616859] [camera] now switch to back camera
<4>[    9.685642] 1297
<4>[    9.724541] [camera] now switch to front camera
<4>[    9.755962] dwc3_gadget_init dwc->revision:0x5533240a
<4>[    9.761009] dwc3_gadget_dma_sync_addr_request 84
<4>[    9.801256] 1297
<4>[    9.809265] dwc3_gadget_init: 2718; DESR: 0
<4>[    9.832082] dwc3_gadget_run_stop 1503 usbpll: 0x1f
<6>[    9.844931]  gadget: Number of LUNs=2
<6>[    9.848661]  lun0: LUN: removable file: (no medium)
<6>[    9.853541]  lun1: LUN: removable file: (no medium)
<6>[    9.860314]  gadget: android_usb ready
<4>[    9.879105] adb_open, cnt:1
<7>[    9.981184] adb_android_function_enable: 1 1
<7>[    9.981204] enable_store:  enable  1
<6>[    9.981262] adb_bind_config
<4>[    9.984098] dwc3_gadget_run_stop 1503 usbpll: 0x1f
<4>[    9.989129] dwc3_gadget_run_stop 1503 usbpll: 0x1f
<4>[   10.124166] store_opt_mode: 0x1
<4>[   10.127355] screen_mode_changed: 1, scene_mode: 0x4
<4>[   10.429063] reset irq come!!!!!!!
<5>[   10.447739] <monitor>,usb plugin type=1. monitor_set_usb_plugin_type,882
<6>[   10.509578] android_work: sent uevent USB_STATE=CONNECTED
<4>[   10.512762] <android_remove_audio_function 1046>.start
<4>[   10.512793] reset irq come!!!!!!!
<6>[   10.513326] android_work: sent uevent USB_STATE=DISCONNECTED
<7>[   10.620595] usb serialnumber config is 1
<6>[   10.620790] android_work: sent uevent USB_STATE=CONNECTED
<6>[   10.626245] android_usb gadget: high-speed config #1: android
<6>[   10.632944] android_work: sent uevent USB_STATE=CONFIGURED
<4>[   11.534944] 
<4>[   11.534949] get_cap_gauge, 484, store cap: 96, temp: 93000
<4>[   11.629440] common->inquiry_string : SMART,UniPad,3.00
<4>[   11.634675] VENDOR : SMART
<7>[   11.637498] usb serialnumber config is 1
<4>[   11.637549] PRODUCT : UniPad 5
<4>[   11.640611] VERSION : 3.00�w�
<4>[   11.644320] common->inquiry_string : SMART,UniPad,3.00
<4>[   11.650184] VENDOR : SMART
<4>[   11.653328] PRODUCT : UniPad 5
<4>[   11.656526] VERSION : 3.00�w�
<4>[   19.535436] 
<4>[   19.535441] [power] atc260x_charger_check_state, 1152, start charge
<6>[   21.444405] request_suspend_state: wakeup (3->0) at 21409848671 (2014-09-23 20:34:04.318459834 UTC)
<6>[   22.165029] acc_open
<6>[   22.167221] acc_release
<4>[   25.905298] store_opt_mode: 0x0
<6>[   28.920351] STK831X_SetEnable:1
<6>[   28.923520] stk_handle_first_en: In.
<3>[   28.927483] stk_get_file_content: filp_open error, no offset file!
<3>[   28.933696] stk_store_in_file: filp_open error!
<6>[   28.933713] stk_handle_first_en: Out. cali_status = 0xff
<6>[   28.984961] STK831X_ReadByteOTP: read 0x7f=0x9
<6>[   29.045215] STK831X_ReadByteOTP: read 0x70=0xdc
<3>[   29.198323] init: sys_prop: permission denied uid:1003  name:service.bootanim.exit
<6>[   34.115615] STK831X_ReadByteOTP: read 0x70=0xdc
<3>[   34.120891] stk_store_in_file: filp_open error!
<6>[   34.125488] STK831X_Tune:TUNE done, 254,2,1
<4>[   34.691808] we do not support cmd 4701 in nand drv ioctl!
<6>[   34.699370] EXT4-fs (actc): re-mounted. Opts: (null)
<6>[   34.712745] EXT4-fs (actc): re-mounted. Opts: (null)
<4>[   34.724512] we do not support cmd 4701 in nand drv ioctl!
<6>[   34.731400] EXT4-fs (actc): re-mounted. Opts: (null)
<6>[   34.802734] EXT4-fs (actc): re-mounted. Opts: (null)
<6>[   34.817031] EXT4-fs (actc): re-mounted. Opts: (null)
<6>[   34.831062] EXT4-fs (actc): re-mounted. Opts: (null)
<3>[   65.675889] init: untracked pid 3700 exited