shadowsocks shell script

shadowsocks

#!/bin/sh /etc/rc.common

START=90
STOP=15

NAME=shadowsocks
EXTRA_COMMANDS=rules
CONFIG_FILE=/etc/$NAME.json

DELAY=10

RULES_REMOTE_SERVER_IP=47.90.55.99
RULES_BYPASS_LIST_FILE=/etc/chinadns_chnroute.txt

REDIR_LOCAL_PORT=10086
REDIR_MTU=1492

LOCAL_LOCAL_PORT=10087
LOCAL_MTU=1492

TUNNEL_LOCAL_PORT=10088
TUNNEL_DESTINATION=8.8.4.4:53
TUNNEL_MTU=1492

start_rules() {
	/data/ss-rules \
		-s $RULES_REMOTE_SERVER_IP \
		-l $REDIR_LOCAL_PORT \
		-B $RULES_BYPASS_LIST_FILE
}

rules() {
	if !(pidof ss-redir >/dev/null); then
		logger -st $NAME -p3 "ss-redir not running."
		return 1
	fi
	start_rules || /usr/bin/ss-rules -f
}

ss_redir() {
	command -v ss-redir >/dev/null 2>&1 || return 1
	ss-redir -c $CONFIG_FILE -u \
		-l $REDIR_LOCAL_PORT \
		--mtu $REDIR_MTU \
		-f /var/run/ss-redir.pid
}

ss_local() {
	command -v ss-local >/dev/null 2>&1 || return 0
	ss-local -c $CONFIG_FILE -u \
		-l $LOCAL_LOCAL_PORT \
		--mtu $LOCAL_MTU \
		-f /var/run/ss-local.pid
}

ss_tunnel() {
	command -v ss-tunnel >/dev/null 2>&1 || return 0
	ss-tunnel -c $CONFIG_FILE -u \
		-l $TUNNEL_LOCAL_PORT \
		-L $TUNNEL_DESTINATION \
		--mtu $TUNNEL_MTU \
		-f /var/run/ss-tunnel.pid
}

start() {
	mkdir -p /var/run /var/etc
	ss_redir && rules
	ss_local
	ss_tunnel
}

delay_start() {
	(sleep $1 && start >/dev/null 2>&1) &
}

boot() {
	if [ "$DELAY" -gt 0 ]; then
		delay_start $DELAY
	else
		start
	fi
	return 0
}

kill_all() {
	kill -9 $(pidof $@) >/dev/null 2>&1
}

stop() {
	/data/ss-rules -f
	kill_all ss-redir ss-local ss-tunnel
	if [ -f /var/run/ss-plugin ]; then
		kill -9 $(pidof $(cat /var/run/ss-plugin | sort | uniq)) >/dev/null 2>&1
		rm -f /var/run/ss-plugin
	fi
}

ss-rules

#!/bin/sh
#
# Copyright (C) 2014-2017 Jian Chang <[email protected]>
#
# This is free software, licensed under the GNU General Public License v3.
# See /LICENSE for more information.
#

usage() {
	cat <<-EOF
		Usage: ss-rules [options]

		Valid options are:

		    -s <server_ips>         ip address of shadowsocks remote server
		    -l <local_port>         port number of shadowsocks local server
		    -S <server_ips>         ip address of shadowsocks remote UDP server
		    -L <local_port>         port number of shadowsocks local UDP server
		    -B <ip_list_file>       a file whose content is bypassed ip list
		    -b <wan_ips>            wan ip of will be bypassed
		    -W <ip_list_file>       a file whose content is forwarded ip list
		    -w <wan_ips>            wan ip of will be forwarded
		    -I <interface>          proxy only for the given interface
		    -d <target>             the default target of lan access control
		    -a <lan_hosts>          lan ip of access control, need a prefix to
		                            define proxy type
		    -e <extra_args>         extra arguments for iptables
		    -o                      apply the rules to the OUTPUT chain
		    -O                      apply the global rules to the OUTPUT chain
		    -u                      enable udprelay mode, TPROXY is required
		    -U                      enable udprelay mode, using different IP
		                            and ports for TCP and UDP
		    -f                      flush the rules
		    -h                      show this help message and exit
EOF
	exit $1
}

loger() {
	# 1.alert 2.crit 3.err 4.warn 5.notice 6.info 7.debug
	logger -st ss-rules[$$] -p$1 $2
}

flush_rules() {
	iptables-save -c | grep -v "SS_SPEC" | iptables-restore -c
	if command -v ip >/dev/null 2>&1; then
		ip rule del fwmark 1 lookup 100 2>/dev/null
		ip route del local default dev lo table 100 2>/dev/null
	fi
	for setname in $(ipset -n list | grep "ss_spec"); do
		ipset destroy $setname 2>/dev/null
	done
	return 0
}

ipset_init() {
	ipset -! restore <<-EOF || return 1
		create ss_spec_src_ac hash:ip hashsize 64
		create ss_spec_src_bp hash:ip hashsize 64
		create ss_spec_src_fw hash:ip hashsize 64
		create ss_spec_dst_sp hash:net hashsize 64
		create ss_spec_dst_bp hash:net hashsize 64
		create ss_spec_dst_fw hash:net hashsize 64
		$(gen_lan_host_ipset_entry)
		$(gen_special_purpose_ip | sed -e "s/^/add ss_spec_dst_sp /")
		$(sed -e "s/^/add ss_spec_dst_bp /" ${WAN_BP_LIST:=/dev/null} 2>/dev/null)
		$(for ip in $WAN_BP_IP; do echo "add ss_spec_dst_bp $ip"; done)
		$(sed -e "s/^/add ss_spec_dst_fw /" ${WAN_FW_LIST:=/dev/null} 2>/dev/null)
		$(for ip in $WAN_FW_IP; do echo "add ss_spec_dst_fw $ip"; done)
EOF
	return 0
}

ipt_nat() {
	include_ac_rules nat
	ipt="iptables -t nat"
	$ipt -A SS_SPEC_WAN_FW -p tcp \
		-j REDIRECT --to-ports $local_port || return 1
	if [ -n "$OUTPUT" ]; then
		$ipt -N SS_SPEC_WAN_DG
		$ipt -A SS_SPEC_WAN_DG -m set --match-set ss_spec_dst_sp dst -j RETURN
		$ipt -A SS_SPEC_WAN_DG -p tcp $EXT_ARGS -j $OUTPUT
		$ipt -I OUTPUT 1 -p tcp -j SS_SPEC_WAN_DG
	fi
	return $?
}

ipt_mangle() {
	[ -n "$TPROXY" ] || return 0
	if !(lsmod | grep -q TPROXY && command -v ip >/dev/null); then
		loger 4 "TPROXY or ip not found."
		return 0
	fi
	ip rule add fwmark 1 lookup 100
	ip route add local default dev lo table 100
	include_ac_rules mangle
	iptables -t mangle -A SS_SPEC_WAN_FW -p udp \
		-j TPROXY --on-port $LOCAL_PORT --tproxy-mark 0x01/0x01
	return $?
}

export_ipt_rules() {
	[ -n "$FWI" ] || return 0
	cat <<-CAT >>$FWI
	iptables-restore -n <<-EOF
	$(iptables-save | grep -E "SS_SPEC|^\*|^COMMIT" |\
			sed -e "s/^-A \(OUTPUT\|PREROUTING\)/-I \1 1/")
	EOF
CAT
	return $?
}

gen_lan_host_ipset_entry() {
	for host in $LAN_HOSTS; do
		case "${host:0:1}" in
			n|N)
				echo add ss_spec_src_ac ${host:2}
				;;
			b|B)
				echo add ss_spec_src_bp ${host:2}
				;;
			g|G)
				echo add ss_spec_src_fw ${host:2}
				;;
		esac
	done
}

gen_special_purpose_ip() {
	cat <<-EOF | grep -E "^([0-9]{1,3}\.){3}[0-9]{1,3}"
		0.0.0.0/8
		10.0.0.0/8
		100.64.0.0/10
		127.0.0.0/8
		169.254.0.0/16
		172.16.0.0/12
		192.0.0.0/24
		192.0.2.0/24
		192.31.196.0/24
		192.52.193.0/24
		192.88.99.0/24
		192.168.0.0/16
		192.175.48.0/24
		198.18.0.0/15
		198.51.100.0/24
		203.0.113.0/24
		224.0.0.0/4
		240.0.0.0/4
		255.255.255.255
		$server
		$SERVER
EOF
}

include_ac_rules() {
	local protocol=$([ "$1" = "mangle" ] && echo udp || echo tcp)
	iptables-restore -n <<-EOF
	*$1
	:SS_SPEC_LAN_DG - [0:0]
	:SS_SPEC_LAN_AC - [0:0]
	:SS_SPEC_WAN_AC - [0:0]
	:SS_SPEC_WAN_FW - [0:0]
	-A SS_SPEC_LAN_DG -m set --match-set ss_spec_dst_sp dst -j RETURN
	-A SS_SPEC_LAN_DG -p $protocol $EXT_ARGS -j SS_SPEC_LAN_AC
	-A SS_SPEC_LAN_AC -m set --match-set ss_spec_src_bp src -j RETURN
	-A SS_SPEC_LAN_AC -m set --match-set ss_spec_src_fw src -j SS_SPEC_WAN_FW
	-A SS_SPEC_LAN_AC -m set --match-set ss_spec_src_ac src -j SS_SPEC_WAN_AC
	-A SS_SPEC_LAN_AC -j ${LAN_TARGET:=SS_SPEC_WAN_AC}
	-A SS_SPEC_WAN_AC -m set --match-set ss_spec_dst_fw dst -j SS_SPEC_WAN_FW
	-A SS_SPEC_WAN_AC -m set --match-set ss_spec_dst_bp dst -j RETURN
	-A SS_SPEC_WAN_AC -j SS_SPEC_WAN_FW
	$(gen_prerouting_rules $protocol)
	COMMIT
EOF
}

gen_prerouting_rules() {
	[ -z "$IFNAMES" ] && echo -I PREROUTING 1 -p $1 -j SS_SPEC_LAN_DG
	for ifname in $IFNAMES; do
		echo -I PREROUTING 1 -i $ifname -p $1 -j SS_SPEC_LAN_DG
	done
}

while getopts ":s:l:S:L:B:b:W:w:I:d:a:e:oOuUfh" arg; do
	case "$arg" in
		s)
			server=$(for ip in $OPTARG; do echo $ip; done)
			;;
		l)
			local_port=$OPTARG
			;;
		S)
			SERVER=$(for ip in $OPTARG; do echo $ip; done)
			;;
		L)
			LOCAL_PORT=$OPTARG
			;;
		B)
			WAN_BP_LIST=$OPTARG
			;;
		b)
			WAN_BP_IP=$OPTARG
			;;
		W)
			WAN_FW_LIST=$OPTARG
			;;
		w)
			WAN_FW_IP=$OPTARG
			;;
		I)
			IFNAMES=$OPTARG
			;;
		d)
			LAN_TARGET=$OPTARG
			;;
		a)
			LAN_HOSTS=$OPTARG
			;;
		e)
			EXT_ARGS=$OPTARG
			;;
		o)
			OUTPUT=SS_SPEC_WAN_AC
			;;
		O)
			OUTPUT=SS_SPEC_WAN_FW
			;;
		u)
			TPROXY=1
			;;
		U)
			TPROXY=2
			;;
		f)
			flush_rules
			exit 0
			;;
		h)
			usage 0
			;;
	esac
done

[ -z "$server" -o -z "$local_port" ] && usage 2

if [ "$TPROXY" = 1 ]; then
	unset SERVER
	LOCAL_PORT=$local_port
elif [ "$TPROXY" = 2 ]; then
	: ${SERVER:?"You must assign an ip for the udp relay server."}
	: ${LOCAL_PORT:?"You must assign a port for the udp relay server."}
fi

flush_rules && ipset_init && ipt_nat && ipt_mangle && export_ipt_rules
RET=$?
[ "$RET" = 0 ] || loger 3 "Start failed!"
exit $RET