.xprofile

#!/bin/sh 
# If an external monitor is connected, place it with xrandr
# Adapted from: http://www.thinkwiki.org/wiki/Xorg_RandR_1.2#Now_automate_it_on_login

###### CHANGE THESE
 
# External output may be "VGA" or "VGA-0" or "DVI-0" or "TMDS-1"
EXTERNAL_OUTPUT="VGA1"
INTERNAL_OUTPUT="LVDS1"
# Resolution for the external monitor
EXTERNAL_RES="1920x1080"
# EXTERNAL_LOCATION may be one of: left, right, above, or below
EXTERNAL_LOCATION="right"

###### DON'T CHANGE THESE

case "$EXTERNAL_LOCATION" in
       left|LEFT)
               EXTERNAL_LOCATION="--left-of $INTERNAL_OUTPUT"
               ;;
       right|RIGHT)
               EXTERNAL_LOCATION="--right-of $INTERNAL_OUTPUT"
               ;;
       top|TOP|above|ABOVE)
               EXTERNAL_LOCATION="--above $INTERNAL_OUTPUT"
               ;;
       bottom|BOTTOM|below|BELOW)
               EXTERNAL_LOCATION="--below $INTERNAL_OUTPUT"
               ;;
       *)
               EXTERNAL_LOCATION="--left-of $INTERNAL_OUTPUT"
               ;;
esac
 
xrandr |grep $EXTERNAL_OUTPUT | grep " connected "
if [ $? -eq 0 ]; then
    xrandr --output $INTERNAL_OUTPUT --off --output $EXTERNAL_OUTPUT --auto $EXTERNAL_LOCATION -s $EXTERNAL_RES
    # Alternative command in case of trouble:
    # (sleep 2; xrandr --output $INTERNAL_OUTPUT --auto --output $EXTERNAL_OUTPUT --auto $EXTERNAL_LOCATION) &
else
    xrandr --output $INTERNAL_OUTPUT --auto --output $EXTERNAL_OUTPUT --off
fi