Reference: http://www.cnx-software.com/2012/07/31/84-mb-minimal-raspbian-armhf-image-for-raspberry-pi/
curl -O https://dl.dropbox.com/u/45842273/2012-07-15-wheezy-raspian-minimal.img.7z
yum install p7zip
7za e 2012-07-15-wheezy-raspian-minimal.img.7z
qemu-system-arm -kernel kernel-qemu -cpu arm1176 -m 256 -M versatilepb -no-reboot -serial stdio -append "root=/dev/sda2 panic=1" -hda 2012-07-15-wheezy-raspian-minimal.img -net nic -net user -vnc :0 -net tap,ifname=vnet0,script=no,downscript=no
yum install makebootfat dosfstools
dd if=/dev/zero of=rpi_installer.img bs=1M count=2048
losetup /dev/loop0 rpi_installer.img
kpartx -av /dev/loop0
fdisk /dev/loop0
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-261, default 1):
Using default value 1
Last cylinder, +cylinders or +size{K,M,G} (1-261, default 261):
Using default value 261
Command (m for help): a
Partition number (1-4): 1
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 22: Invalid argument.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)
Syncing disks.
kpartx -av /dev/loop0
mkfs.vfat /dev/mapper/loop0p1
mkdir /tmp/x
mount -o loop rpi_installer.img /tmp/x
cd /tmp/x
unzip /root/rpi_installer_08-19-12.zip
cd && umount /tmp/x
losetup -d /dev/loop0
qemu-system-arm -kernel kernel-qemu -cpu arm1176 -m 256 -M versatilepb -no-reboot -serial stdio -append "root=/dev/sda1 panic=1" -hda rpi_installer.img -net nic -net user -vnc :1 -net tap,ifname=vnet1,script=no,downscript=no
VM doesn't boot for lack of init script.
virt-install --name=owen --ram=1024 --vcpus=1 --cdrom=/media/CentOS-6.3-x86_64-minimal.iso --os-type=linux --os-variant=rhel6 --disk pool=vmstorage,size=20 --network bridge=br0,model=e1000 --video=vga --vnc --connect qemu:///system
Installation options: (copy params from post and adapt) /dev/vda1 500 /boot /dev/vda2 19979 os root 17960 /root ext4 swap 2016 - swap (copy default tasks from post)
curl -O http://ftp.snt.utwente.nl/pub/software/rpi/images/raspbian/2012-12-16-wheezy-raspbian/2012-12-16-wheezy-raspbian.zip
curl -O http://xecdesign.com/downloads/linux-qemu/kernel-qemu
yum install unzip
unzip 2012-12-16-wheezy-raspbian.zip
yum install http://www.opencomputingsolutions.com/pub/rpms/over/centos/6/x86_64/qemu-1.1.0-1.x86_64.rpm http://www.opencomputingsolutions.com/pub/rpms/over/centos/6/x86_64/qemu-arm-1.1.0-1.x86_64.rpm
qemu-img convert -f raw -O qcow2 2012-12-16-wheezy-raspbian.img raspbian.qcow
qemu-img resize raspbian.qcow +6G
qemu-img info raspbian.qcow
image: raspbian.qcow
file format: qcow2
virtual size: 7.8G (8382316544 bytes)
disk size: 1.6G
cluster_size: 65536
screen -dmS rpi qemu-system-arm -kernel kernel-qemu -cpu arm1176 -m 256 -M versatilepb -no-reboot -serial stdio -append "root=/dev/sda2 panic=1" -hda 2012-12-16-wheezy-raspbian.img -net nic -net user -vnc :0 -net tap,ifname=vnet0,script=no,downscript=no
Configurator:
Setup bridge on host VM:
vi /etc/sysconfig/network-script/ifcfg-virbr0
DEVICE=virbr0
TYPE=Bridge
IPADDR=172.16.32.6
NETMASK=255.255.255.0
GATEWAY=172.16.32.254
ONBOOT=yes
BOOTPROTO=static
IPV6INIT=no
IPV6_AUTOCONF=no
STP=no
vi /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
BOOTPROTO="none"
HWADDR="52:54:00:70:79:B3"
NM_CONTROLLED="no"
ONBOOT="yes"
TYPE="Ethernet"
UUID="e2d7181d-be2d-496f-aa2f-d4c49832c393"
BRIDGE="virbr0"
PROMISC="yes"
Add raspberry interface to bridge:
brctl addif virbr0 vnet0
ip link set vnet0 up
Configure address on RPi interface:
sudo vi /etc/network/interfaces
iface eth0 inet static
address 172.16.32.7
netmask 255.255.255.0
gateway 172.16.32.254
sudo vi /etc/resolv.conf
nameserver 8.8.8.8
Update packages and install puppet:
sudo apt-get update
sudo apt-get upgrade
sudo apt-get install puppet
Configure server:
sudo vi /etc/puppet/puppet.conf
...
[agent]
server = puppet.derecom.it
First run:
sudo puppet agent --test --verbose
On the master:
puppet ca sign raspberrypi
sudo fdisk /dev/sda
Command (m for help): d
Partition number (1-4): 2
Command (m for help): n
Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
Select (default p): p
Partition number (1-4, default 2): 2
First sector (2048-16371711, default 2048): 122880
Last sector, +sectors or +size{K,M,G} (122880-16371711, default 16371711):
Using default value 16371711
Command (m for help): p
Disk /dev/sda: 8382 MB, 8382316544 bytes
64 heads, 32 sectors/track, 7994 cylinders, total 16371712 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00017b69
Device Boot Start End Blocks Id System
/dev/sda1 8192 122879 57344 c W95 FAT32 (LBA)
/dev/sda2 122880 16371711 8124416 83 Linux
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)
Syncing disks.
Reboot??? (I needed to do so, even after running partprobe).
sudo resize2fs /dev/sda2
resize2fs 1.42.5 (29-Jul-2012)
Filesystem at /dev/sda2 is mounted on /; on-line resizing required
old_desc_blocks = 1, new_desc_blocks = 1
The filesystem on /dev/sda2 is now 2031104 blocks long.
pi@raspberrypi ~ $ df -h
Filesystem Size Used Avail Use% Mounted on
rootfs 7.7G 1.6G 5.8G 22% /
/dev/root 7.7G 1.6G 5.8G 22% /
devtmpfs 124M 0 124M 0% /dev
tmpfs 25M 180K 25M 1% /run
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 50M 0 50M 0% /run/shm
curl -O http://people.freebsd.org/~gonzo/arm/rpi/raspberry-pi-uboot-20120621.tar.gz
yum install makebootfat dosfstools
dd if=/dev/zero of=uboot.img bs=1M count=2048
losetup /dev/loop1 uboot.img
kpartx -av /dev/loop1
fdisk /dev/loop1
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-261, default 1):
Using default value 1
Last cylinder, +cylinders or +size{K,M,G} (1-261, default 261):
Using default value 261
Command (m for help): a
Partition number (1-4): 1
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 22: Invalid argument.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)
Syncing disks.
kpartx -av /dev/loop1
mkfs.vfat /dev/mapper/loop1p1
mkdir /tmp/x
mount -o loop /dev/mapper/loop1p1 /tmp/x
cd /tmp/x
tar zxvf /root/raspberry-pi-uboot-20120621.tar.gz
cd && umount /tmp/x
losetup -d /dev/loop0
qemu-system-arm -kernel kernel-qemu -cpu arm1176 -m 256 -M versatilepb -no-reboot -serial stdio -append "root=/dev/sda1 panic=1" -hda uboot.img -net nic -net user -vnc :1 -net tap,ifname=vnet1,script=no,downscript=no
Same failure as with installer...
I don't like these parameters :
m 256 -M versatilepb
I tried to do something like this :
virt-install
--name pi
--machine raspi3
--cpu arm1176
--memory 1024
--import \ --disk /root/Desktop/zi/Work/Android/Raspy/Debian/2019-09-26-raspbian-buster-lite.img,format=raw,bus=virtio
--network user,model=virtio
--video vga
--graphics spice
--rng device=/dev/urandom,model=virtio
--boot 'uefi=RPI_EFI.fd,dtb=bcm2710-rpi-3-b-plus.dtb,kernel=kernel8.img,kernel_args=root=/dev/vda2 rootwait panic=1 dwc_otg.fiq_fsm_enable=0'
--events on_reboot=destroy
But I get this error :
ERROR internal error: Unexpected enum value 0 for virDomainDeviceAddressType