Skip to content

Instantly share code, notes, and snippets.

@stelf
Created November 17, 2017 15:42
Show Gist options
  • Select an option

  • Save stelf/09b829d9d9f4d7fbcc2590c23cb179c8 to your computer and use it in GitHub Desktop.

Select an option

Save stelf/09b829d9d9f4d7fbcc2590c23cb179c8 to your computer and use it in GitHub Desktop.
# decode-dimms version 6231 (2014-02-20 10:54:34 +0100)
Memory Serial Presence Detect Decoder
By Philip Edelbrock, Christian Zuckschwerdt, Burkart Lingner,
Jean Delvare, Trent Piepho and others
Decoding EEPROM: /sys/bus/i2c/drivers/eeprom/9-0050
Guessing DIMM is in bank 1
---=== SPD EEPROM Information ===---
EEPROM CRC of bytes 0-116 OK (0x9579)
# of bytes written to SDRAM EEPROM 176
Total number of bytes in EEPROM 256
Fundamental Memory type DDR3 SDRAM
Module Type SO-DIMM
---=== Memory Characteristics ===---
Fine time base 2.500 ps
Medium time base 0.125 ns
Maximum module speed 1600 MHz (PC3-12800)
Size 8192 MB
Banks x Rows x Columns x Bits 8 x 16 x 10 x 64
Ranks 2
SDRAM Device Width 8 bits
Bus Width Extension 0 bits
tCL-tRCD-tRP-tRAS 9-9-9-24
Supported CAS Latencies (tCL) 9T, 8T, 7T, 6T
---=== Timing Parameters ===---
Minimum Write Recovery time (tWR) 15.000 ns
Minimum Row Active to Row Active Delay (tRRD) 6.000 ns
Minimum Active to Auto-Refresh Delay (tRC) 48.125 ns
Minimum Recovery Delay (tRFC) 260.000 ns
Minimum Write to Read CMD Delay (tWTR) 7.500 ns
Minimum Read to Pre-charge CMD Delay (tRTP) 7.500 ns
Minimum Four Activate Window Delay (tFAW) 30.000 ns
---=== Optional Features ===---
Operable voltages 1.5V, 1.35V
RZQ/6 supported? Yes
RZQ/7 supported? Yes
DLL-Off Mode supported? Yes
Operating temperature range 0-95 degrees C
Refresh Rate in extended temp range 1X
Auto Self-Refresh? No
On-Die Thermal Sensor readout? No
Partial Array Self-Refresh? Yes
Thermal Sensor Accuracy Not implemented
SDRAM Device Type Standard Monolithic
---=== Physical Characteristics ===---
Module Height (mm) 30
Module Thickness (mm) 3 front, 3 back
Module Width (mm) 67.6
Module Reference Card F
---=== Manufacturer Data ===---
Module Manufacturer Corsair
Manufacturing Location Code 0x01
Manufacturing Date 2016-W24
Part Number CMSX16GX3M2B1600C9
Decoding EEPROM: /sys/bus/i2c/drivers/eeprom/9-0052
Guessing DIMM is in bank 3
---=== SPD EEPROM Information ===---
EEPROM CRC of bytes 0-116 OK (0x9579)
# of bytes written to SDRAM EEPROM 176
Total number of bytes in EEPROM 256
Fundamental Memory type DDR3 SDRAM
Module Type SO-DIMM
---=== Memory Characteristics ===---
Fine time base 2.500 ps
Medium time base 0.125 ns
Maximum module speed 1600 MHz (PC3-12800)
Size 8192 MB
Banks x Rows x Columns x Bits 8 x 16 x 10 x 64
Ranks 2
SDRAM Device Width 8 bits
Bus Width Extension 0 bits
tCL-tRCD-tRP-tRAS 9-9-9-24
Supported CAS Latencies (tCL) 9T, 8T, 7T, 6T
---=== Timing Parameters ===---
Minimum Write Recovery time (tWR) 15.000 ns
Minimum Row Active to Row Active Delay (tRRD) 6.000 ns
Minimum Active to Auto-Refresh Delay (tRC) 48.125 ns
Minimum Recovery Delay (tRFC) 260.000 ns
Minimum Write to Read CMD Delay (tWTR) 7.500 ns
Minimum Read to Pre-charge CMD Delay (tRTP) 7.500 ns
Minimum Four Activate Window Delay (tFAW) 30.000 ns
---=== Optional Features ===---
Operable voltages 1.5V, 1.35V
RZQ/6 supported? Yes
RZQ/7 supported? Yes
DLL-Off Mode supported? Yes
Operating temperature range 0-95 degrees C
Refresh Rate in extended temp range 1X
Auto Self-Refresh? No
On-Die Thermal Sensor readout? No
Partial Array Self-Refresh? Yes
Thermal Sensor Accuracy Not implemented
SDRAM Device Type Standard Monolithic
---=== Physical Characteristics ===---
Module Height (mm) 30
Module Thickness (mm) 3 front, 3 back
Module Width (mm) 67.6
Module Reference Card F
---=== Manufacturer Data ===---
Module Manufacturer Corsair
Manufacturing Location Code 0x01
Manufacturing Date 2016-W24
Part Number CMSX16GX3M2B1600C9
Number of SDRAM DIMMs detected and decoded: 2
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment