Convert SmartIR Broadlink commands to Tuya

broadlink_to_tuya.py

import io
import base64
import json
import sys
from bisect import bisect
from struct import pack, unpack
from math import ceil

BRDLNK_UNIT = 269 / 8192

# MAIN API
filter = lambda x: [i for i in x if i<65535]

def encode_ir(command: str) -> str:
	# command = "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"
  signal = filter(get_raw_from_broadlink(base64.b64decode(command).hex()))

  payload = b''.join(pack('<H', t) for t in signal)
  compress(out := io.BytesIO(), payload, level = 2)
  payload = out.getvalue()
  return base64.encodebytes(payload).decode('ascii').replace('\n', '')


# COMPRESSION

def emit_literal_blocks(out: io.FileIO, data: bytes):
	for i in range(0, len(data), 32):
		emit_literal_block(out, data[i:i+32])

def emit_literal_block(out: io.FileIO, data: bytes):
	length = len(data) - 1
	assert 0 <= length < (1 << 5)
	out.write(bytes([length]))
	out.write(data)

def emit_distance_block(out: io.FileIO, length: int, distance: int):
	distance -= 1
	assert 0 <= distance < (1 << 13)
	length -= 2
	assert length > 0
	block = bytearray()
	if length >= 7:
		assert length < (1 << 8)
		block.append(length - 7)
		length = 7
	block.insert(0, length << 5 | distance >> 8)
	block.append(distance & 0xFF)
	out.write(block)

def compress(out: io.FileIO, data: bytes, level=2):
	'''
	Takes a byte string and outputs a compressed "Tuya stream".
	Implemented compression levels:
	0 - copy over (no compression, 3.1% overhead)
	1 - eagerly use first length-distance pair found (linear)
	2 - eagerly use best length-distance pair found
	3 - optimal compression (n^3)
	'''
	if level == 0:
		return emit_literal_blocks(out, data)

	W = 2**13 # window size
	L = 256+9 # maximum length
	distance_candidates = lambda: range(1, min(pos, W) + 1)

	def find_length_for_distance(start: int) -> int:
		length = 0
		limit = min(L, len(data) - pos)
		while length < limit and data[pos + length] == data[start + length]:
			length += 1
		return length
	find_length_candidates = lambda: \
		( (find_length_for_distance(pos - d), d) for d in distance_candidates() )
	find_length_cheap = lambda: \
		next((c for c in find_length_candidates() if c[0] >= 3), None)
	find_length_max = lambda: \
		max(find_length_candidates(), key=lambda c: (c[0], -c[1]), default=None)

	if level >= 2:
		suffixes = []; next_pos = 0
		key = lambda n: data[n:]
		find_idx = lambda n: bisect(suffixes, key(n), key=key)
		def distance_candidates():
			nonlocal next_pos
			while next_pos <= pos:
				if len(suffixes) == W:
					suffixes.pop(find_idx(next_pos - W))
				suffixes.insert(idx := find_idx(next_pos), next_pos)
				next_pos += 1
			idxs = (idx+i for i in (+1,-1)) # try +1 first
			return (pos - suffixes[i] for i in idxs if 0 <= i < len(suffixes))

	if level <= 2:
		find_length = { 1: find_length_cheap, 2: find_length_max }[level]
		block_start = pos = 0
		while pos < len(data):
			if (c := find_length()) and c[0] >= 3:
				emit_literal_blocks(out, data[block_start:pos])
				emit_distance_block(out, c[0], c[1])
				pos += c[0]
				block_start = pos
			else:
				pos += 1
		emit_literal_blocks(out, data[block_start:pos])
		return

	# use topological sort to find shortest path
	predecessors = [(0, None, None)] + [None] * len(data)
	def put_edge(cost, length, distance):
		npos = pos + length
		cost += predecessors[pos][0]
		current = predecessors[npos]
		if not current or cost < current[0]:
			predecessors[npos] = cost, length, distance
	for pos in range(len(data)):
		if c := find_length_max():
			for l in range(3, c[0] + 1):
				put_edge(2 if l < 9 else 3, l, c[1])
		for l in range(1, min(32, len(data) - pos) + 1):
			put_edge(1 + l, l, 0)

	# reconstruct path, emit blocks
	blocks = []; pos = len(data)
	while pos > 0:
		_, length, distance = predecessors[pos]
		pos -= length
		blocks.append((pos, length, distance))
	for pos, length, distance in reversed(blocks):
		if not distance:
			emit_literal_block(out, data[pos:pos + length])
		else:
			emit_distance_block(out, length, distance)

def get_raw_from_broadlink(string):
  dec = []
  unit = BRDLNK_UNIT  # 32.84ms units, or 2^-15s
  length = int(string[6:8] + string[4:6], 16)  # Length of payload in little endian

  i = 8
  while i < length * 2 + 8:  # IR Payload
    hex_value = string[i:i+2]
    if hex_value == "00":
      hex_value = string[i+2:i+4] + string[i+4:i+6]  # Quick & dirty big-endian conversion
      i += 4
    dec.append(ceil(int(hex_value, 16) / unit))  # Will be lower than initial value due to former round()
    i += 2

  return dec


def process_commands(filename):
  with open(filename, 'r') as file:
    data = json.load(file)

  def process_commands_recursively(commands):
    processed_commands = {}
    for key, value in commands.items():
      if isinstance(value, str):
        processed_commands[key] = encode_ir(value)
      elif isinstance(value, dict):
        processed_commands[key] = process_commands_recursively(value)
      else:
        processed_commands[key] = value

    return processed_commands

  data['commands'] = process_commands_recursively(data.get('commands', {}))
  data['supportedController'] = 'MQTT'
  data['commandsEncoding'] = 'Raw'
  return json.dumps(data, indent=2)


print(process_commands(sys.argv[1]))

Not yet. I tried some online converters without luck. I suspect the codes are not "standard" broadlink format.

I used the code and it does not add "ir_code_to_send":
should I do it menually? am I doing something wrong?
is it not a must?

I got the script to run but have the same issue as @Jody1818 where none of the lines in the output have "ir_code_to_send"

Also all the output IR codes are wildly different from the original .json codes.