swilson

blueprint:
  name: Frigate Notification
  description: |
    ## Frigate Mobile App Notification

    This blueprint will send a notification to your device when a Frigate event for the selected camera is fired. The notification will initially include the thumbnail of the detection, but will update to include actionable notifications allowing you to view the saved clip/snapshot when available, or silence the notification for a configurable amount of time.

    With this blueprint, you may send the notification to multiple devices by leaving "Device" blank and instead use a [notification group][1].

    ### Required entities:

swilson

checkTime = datetime.datetime.now() - datetime.timedelta(hours=24)

for entity_id in hass.states.get('group.zwave').attributes['entity_id']:
    entity = hass.states.get(entity_id)

    if entity is not None:
        lastSeen = datetime.datetime.strptime(entity.attributes['receivedTS'][:-5], '%Y-%m-%d %H:%M:%S')

        if entity.attributes['is_failed'] or lastSeen < checkTime:
            msg = entity.attributes['friendly_name'] + ' is AWOL'

swilson

FROM homeassistant/home-assistant:stable

# Install dev tools
RUN apk add --update alpine-sdk

# Grab heyu
RUN wget -O heyu.zip https://codeload.github.com/HeyuX10Automation/heyu/zip/v2.10.1
RUN unzip heyu.zip

# Build it (the 'darwin' configuration seems to work on Alpine)

swilson

#!/usr/bin/python

import smbus
import time

bus = smbus.SMBus(1)

class HT1635B():
    DEVICE_ADDRESS    = 0x68
    CMD_RAM_W         = 0b10000000

swilson

switch:
  - platform: command_line
    switches:
      front_door_camera_ir:
        command_on: 'curl  -k "https://192.168.1.XXX:443/cgi-bin/CGIProxy.fcgi?cmd=openInfraLed&usr=XXX&pwd=XXX"'
        command_off: 'curl  -k "https://192.168.1.XXX:443/cgi-bin/CGIProxy.fcgi?cmd=closeInfraLed&usr=XXX&pwd=XXX"'

swilson

sensor:
  - platform: template
    sensors:
      sunrise:
        value_template: '{% set timestamp = as_timestamp(states.sun.sun.attributes.next_rising) | timestamp_custom("%I:%M %p") %} {{ timestamp.lstrip("0") }}'
        friendly_name: "Sunrise"
      sunset:
        value_template: '{% set timestamp = as_timestamp(states.sun.sun.attributes.next_setting) | timestamp_custom("%I:%M %p") %} {{ timestamp.lstrip("0") }}'
        friendly_name: "Sunset"

swilson

# Make sure OPT_TRIGGERS is enabled in ZoneMinder, and the camera is set to Nodect
switch:
 - platform: telnet
    switches:
      front_door_camera_trigger:
        resource: 'localhost'
        port: 6802
        command_on: '1|on|123|MotionOn|on'
        command_off: '1|off|123|MotionOff|off'

swilson

binary_sensor:  
  - platform: command_line
    name: "Front Door Motion Sensor"
    command: 'curl -k --silent "https://192.168.1.XXX:443/cgi-bin/CGIProxy.fcgi?cmd=getDevState&usr=XXXX&pwd=XXXX" | grep -oP "(?<=motionDetectAlarm>).*?(?=</motionDetectAlarm>)"'
    device_class: motion
    payload_on: "2"
    payload_off: "1"
    scan_interval: 3

swilson

  - platform: template
    sensors:
      hydro_rate:
        # TODO account for holidays
        value_template: >-
          {% if now().weekday() > 4 or now().hour < 7 or now().hour >= 19 %}
            off_peak
          {% elif now().hour >= 7 and now().hour < 11 %}
            {% if now().month >= 5 and now().month <= 10 %}
              mid_peak

swilson

import sys, select, socket, time

bufferSize = 1024 # whatever you need

s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
s.bind(('', 0))
s.setsockopt(socket.SOL_SOCKET, socket.SO_BROADCAST, 1)

sock_recv = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
sock_recv.bind(('', 22081))