Last active
April 1, 2023 15:53
-
-
Save szydan/88d42a124a81fa060f2b47c63557e5a3 to your computer and use it in GitHub Desktop.
Raspberry pi - wifi wlan0 -> eth0 bridge
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
#!/bin/bash | |
# Share Wifi with Eth device | |
# | |
# | |
# This script is created to work with Raspbian Stretch | |
# but it can be used with most of the distributions | |
# by making few changes. | |
# | |
# Make sure you have already installed `dnsmasq` | |
# Please modify the variables according to your need | |
# Don't forget to change the name of network interface | |
# Check them with `ifconfig` | |
sudo dhcpcd # it seems that on start wlan0 is down this hack brings it up | |
ip_address="192.168.2.1" | |
netmask="255.255.255.0" | |
dhcp_range_start="192.168.2.2" | |
dhcp_range_end="192.168.2.100" | |
dhcp_time="12h" | |
eth="eth0" | |
wlan="wlan0" | |
sudo systemctl start network-online.target &> /dev/null | |
sudo iptables -F | |
sudo iptables -t nat -F | |
sudo iptables -t nat -A POSTROUTING -o $wlan -j MASQUERADE | |
sudo iptables -A FORWARD -i $wlan -o $eth -m state --state RELATED,ESTABLISHED -j ACCEPT | |
sudo iptables -A FORWARD -i $eth -o $wlan -j ACCEPT | |
sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward" | |
sudo ifconfig $eth $ip_address netmask $netmask | |
# Remove default route created by dhcpcd | |
sudo ip route del 0/0 dev $eth &> /dev/null | |
sudo systemctl stop dnsmasq | |
sudo rm -rf /etc/dnsmasq.d/* &> /dev/null | |
echo -e "interface=$eth\n\ | |
bind-interfaces\n\ | |
server=8.8.8.8\n\ | |
domain-needed\n\ | |
bogus-priv\n\ | |
dhcp-range=$dhcp_range_start,$dhcp_range_end,$dhcp_time" > /tmp/custom-dnsmasq.conf | |
sudo cp /tmp/custom-dnsmasq.conf /etc/dnsmasq.d/custom-dnsmasq.conf | |
sudo systemctl start dnsmasq |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
based on https://www.instructables.com/id/Share-WiFi-With-Ethernet-Port-on-a-Raspberry-Pi/ |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment