CMS Ruby RESTFul App 1

README

*******************************************************************************
* Licensed by AT&T under 'Software Development Kit Tools Agreement.' 
*
* 2013 TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION:
* http://developer.att.com/sdk_agreement/ 
*
* Copyright 2013 AT&T Intellectual Property. All rights reserved.  
* http://developer.att.com 
*
* For more information contact [email protected]
*******************************************************************************

  AT&T API Platform Sample Apps 
 --------------------------------------

  This file describes how to set up, configure and run the Ruby sample
  applications using the AT&T API Platform services. It covers all steps
  required to register the applications on DevConnect as well as running the
  sample applications locally.
  
    1. Configuration
    2. Installation
    3. Parameters
    4. Running the application


1. Configuration

  Configuration consists of a few steps necessary to get an application
  registered on DevConnect with the proper services and endpoints, depending on
  the type of client-side application (autonomous/non-autonomous). 

  To register an application, go to https://devconnect-api.att.com/ and login
  with your valid username and password. Next, choose "My Apps" from the bar at
  the top of the page and click the "Setup a New Application" button. 

  Fill in the form, in particular all fields marked as "required". 

  Be careful while filling in the "OAuth Redirect URL" field. It should contain
  the URL that the OAuth provider will redirect users to when he/she
  successfully authenticates and authorizes your application.  The oauth
  redirect field must match the redirect specified in the app's config.yml

  NOTE: You MUST select the Sample Applications name in the list of services
  under field 'Services' in order to enable access to the cloud api. 

  After your application is registered you will receive an API and Secret key.
  They are necessary for your registered applications to access the AT&T
  Platform APIs. See 'Adjusting parameters' below to learn how to use these
  keys in your applications.

  Initially your newly registered application is restricted to the "Sandbox"
  environment only. To move it to production, you may promote it by clicking
  the "Promote to production" button. Notice that you will get a different API
  key and secret, so these values in your application should be adjusted
  accordingly.

  Depending on the kind of authentication used, an application may be based on
  either the Autonomous Client or the Web-Server Client OAuth flow; see:
    https://devconnect-api.att.com/docs/oauth20/autonomous-client-application-oauth-flow
    https://devconnect-api.att.com/docs/oauth20/web-server-client-application-oauth-flow


2. Installation

** Requirements

  To run the examples you will need ruby 1.8+ and a few ruby gems that the
  applications are built upon:
  
    - sinatra: (http://www.sinatrarb.com/) used to construct a simple web
      application and manage URLs within.
  
    - sinatra-contrib: additional set of useful helpers, including ones used to
      read settings from external files.

    - rest-client: library for making restful calls

    - json: used for encoding and decoding requests/responses

    - att-codekit: library developed around the att cloud services (see below
      to install)
      - rake: compiling tool used to make att-codekit
      - yard: documentation tool used by att-codekit
  
  To install these gems open up a terminal window and invoke:
  
      gem install sinatra sinatra-contrib rest-client json rake yard
  
  On a *nix based system you may need to raise your access privliges, such as 
  prefixing the command with sudo or logging in as root by running su.

** Installing the att-codekit library 
Note: required for ruby 1.9+ and suggested for 1.8

    The code kit library can be installed by using our hosted gem file.
        
        gem sources --add http://ldev.code-api-att.com:8808
        gem install att-codekit

    Note that the codekit is under heavy development and is using a semantic
    versioning scheme. Non-backwards compatible changes _will_ increase the
    major version number.
    

** Setting up on a different port number

  In the case multiple applications need to be run at the same time, you need
  to use different port numbers.

  By default sinatra uses port number 4567; however only one running
  application may use this port. In the case that you want to run more than one
  sinatra-based application, you will need to update each applications' port
  number (located in config.yml). 

    eg. application 1 - port: 4567, application 2 - port: 4568 

  The alternative is to set up your webserver to use a tool such as phusion
  passenger. Setting up a webserver, however, is beyond the scope of this
  article.


3. Parameters

  Each application contains a config.yml file. It holds configurable parameters
  described in the easy to read format YAML. You are free to adjust these to
  your needs. If you introduce a change make sure to restart the application
  for it to take effect. 

  The following are short descriptions of commonly used parameters:
  
  REQUIRED -
   1) FQDN        : The main server handling requests, ex: https://api.att.com
   
   2) api_key     : set the value as per your registered application 'API
                    key' field value 
   
   3) secret_key  : set the value as per your registered application
                    'Secret key' field value

  OPTIONAL -
    4) port        : The port number which the application will run standalone
  
    5) tokens_file : The path where the oauth token will be saved. This option
                     is only usable in client credential style authentication. 
                     Must have write permissions.
  
  Note: If your application is promoted from the Sandbox environment to
  Production environment and you decide to use production application settings,
  you must update api_key and secret_key as per production application details.


4. Running the application

  To run the application, open up a terminal window in the application's
  directory and type:

      ruby (app name).rb

  Where (app name) is replaced with the current directories app name.

  Your application by default is accessible in a web browser at the url:
      http://localhost:4567/ 

  You may interrupt the application at any time by pressing ctrl-C.

README.txt

******************************************************************************************
* Licensed by AT&T under 'Software Development Kit Tools Agreement.' 2013
* TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION: http://developer.att.com/sdk_agreement/
* Copyright 2013 AT&T Intellectual Property. All rights reserved. http://developer.att.com
* For more information contact [email protected]<mailto:[email protected]>
******************************************************************************************

AT&T API Platform Samples - CMS app 1
 ------------------------------

This application demonstrates the usage of Call Management API of AT&T platform. 
The application provides operations to support the creation of outgoing call session
and signals to existing sessions. Incoming call sessison will be created automatically
in the call environment.

This file describes how to set up, configure and run the Ruby applications using AT&T 
API Platform services. It covers all steps required to register the application on DevConnect
and, based on the generated API keys and secrets, create and run one's own full-fledged sample applications.

  1. Configuration
  2. Installation
  3. Parameters
  4. Running the application


1. Configuration

  Configuration consists of a few steps necessary to get an application registered on DevConnect with the proper
  services and endpoints, depending on the type of client-side application (autonomous/non-autonomous). 

  To register an application, go to https://devconnect-api.att.com/ and login with your valid username and password.
  Next, choose "My Apps" from the bar at the top of the page and click the "Setup a New Application" button. 

  Fill in the form, in particular all fields marked as "required". 

  Be careful while filling in the "OAuth Redirect URL" field. It should contain the URL that the oAuth provider will 
  redirect users to when he/she successfully authenticates and authorizes your application.

  NOTE: You MUST select Call Management in the list of services under field 'Services' in order to use this sample 
  application code. 

  Having your application registered, you will get back an important pair of data: an API key and Secret key. They are 
  necessary to get your applications working with the AT&T Platform APIs. See 'Adjusting parameters' below to learn how 
  to use these keys.

  Initially your newly registered application is restricted to the "Sandbox" environment only. To move it to production, 
  you may promote it by clicking the "Promote to production" button. Notice that you will get a different API key and secret, 
  so these values in your application should be adjusted accordingly.

  Depending on the kind of authentication used, an application may be based on either the Autonomous Client or the Web-Server 
  Client OAuth flow (see https://devconnect-api.att.com/docs/oauth20/autonomous-client-application-oauth-flow or
  https://devconnect-api.att.com/docs/oauth20/web-server-client-application-oauth-flow respectively).


2. Installation

** Requirements

   To run the examples you need ruby 1.8+ and a few gems that the applications are heavily based on:

     - sinatra (http://www.sinatrarb.com/) 
       used to construct a simple web application and manage URLs within.

     - eventmachine
	 To ensure installation of the sinatra-contrib gem you must first install the gem eventmachine. 
         Sinatra-contrib has a dependency on eventmachine. EventMachine enables programs to easily 
          interface with other programs using TCP/IP, especially if custom protocols are required.

     - sinatra-contrib 
       Additional set of useful helpers, including ones used to read settings from external files.

     - Also make sure you have rest-client and json gems installed. 
   	To install these gems open up a terminal window and invoke:

     - gem install sinatra eventmachine sinatra-contrib rest-client json
	If you are experiencing any additional difficulties installing gems, particularly sinatra-contrib,
        it may prove useful to install the ruby gem thin. This can be installed in the terminal by invoking:

     - gem install thin

   Having them installed, you are almost ready to run the sample applications.


** Setting up on a different port number

   In case multiple applications need to be run at the same time, you need to consider using different port numbers.

   By default sinatra uses port number 4567 and only one running application may use this port. In case you want to run one
   more sinatra-based application, you need to change its port number, eg. to 4568. This way you may have each application 
   running on a unique port.


3. Parameters

   Each application contains a config.yml file. It holds configurable parameters 
   described in an easy to read YAML format which you are free to adjust to your needs. Following are short descriptions
   of parameters used by this application:

   1) FQDN              : https://api.att.com

   2) port              : port number that application binds to (default: 4567)

   3) api_key           : set the value as per your registered application 'API key' field value

   4) secret_key        : set the value as per your registered application 'Secret key' field value

   5) tokens_file       : file containing authorization and refresh tokens

   6) phoneNumber       : set the phone number value as per the outbound session in Feature 1

   Note: If your application is promoted from Sandbox environment to Production environment and you decide to use
   production application settings, you must update parameters 1-2 as per production application details.


4. Running the application

  To run the application, open up a terminal window and type:

    ruby ./cms.rb

  or

    ./cms.rb

  Your application becomes available in a web browser, so you may visit: http://localhost:4567/ to see it working.

  You may interrupt the application at any time by pressing ctrl-C.

ccs.rb

# Licensed by AT&T under 'Software Development Kit Tools Agreement.' 2012
# TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION: http://developer.att.com/sdk_agreement/
# Copyright 2012 AT&T Intellectual Property. All rights reserved. http://developer.att.com
# For more information contact [email protected]

#!/usr/bin/ruby
require 'rubygems'
require 'json'
require 'rest_client'
require 'sinatra'
require 'open-uri'
require 'sinatra/config_file'
require File.join(File.dirname(__FILE__), 'common.rb')

enable :sessions

config_file 'config.yml'

set :port, settings.port
set :protection, :except => :frame_options

SCOPE = 'CCS'

# Obtain an OAuth access token if necessary.
['/CreateSession', '/SendSignal'].each do |path|
  before path do
    obtain_tokens(settings.FQDN, settings.api_key, settings.secret_key, SCOPE, settings.tokens_file)
  end
end

# On start of application clear any session id value and read scripts.
get '/' do
  clear_session_variables
  read_script
  erb :ccs
end

post '/CreateSession' do
  read_script
  if params[:btnCreateSession] != nil
  numberScript = params[:txtNumberToDial]
    if numberScript.empty?
      read_script
      @error = 'You must enter in a telephone number or sip address.'
      return erb :ccs
    else
      read_script
      create_session
      return erb :ccs
    end
  else
    erb :ccs
  end
end

post '/SendSignal' do
  if params[:scriptType].nil?
    send_signal
    read_script
    return erb :ccs
  else
    read_script
    return erb :ccs
  end
end

def clear_session_variables
  session[:txtNumberToDial] = nil
  session[:txtMessageToPlay] = nil
  session[:txtNumber] = nil
  session[:ccs_id] = nil
end

# Function to get contents of selected script file.
def getContentsFromFile filetoread
  return File.read Dir.pwd + '/' + filetoread
end

def read_script
  # Populate Feature 1: Outbound voice/message Session text area with contents of Script.rb script. 
  @firstscript = 'First.rb'
  @outbound = getContentsFromFile @firstscript
end

# Function to create session for outbound voice and messaging.
def create_session

  # Script variables for First.rb.
  numberToDial = session[:txtNumberToDial] = params[:txtNumberToDial]
  messageToPlay = session[:txtMessageToPlay] = params[:txtMessageToPlay]
  numberVar = session[:txtNumber] = params[:txtNumber]
  scriptType = session[:scriptType] = params[:scriptType]
  
  # Pass the script variable for First.rb in request body.
  requestbody = '{"feature":"' + scriptType + '","messageToPlay":"' + messageToPlay + '","numberToDial":"' + numberToDial.to_s + '","featurenumber":"' + numberVar.to_s + '"}'
  
  # Resource URL for Create Session.
  url = "#{settings.FQDN}/rest/1/Sessions"
RestClient.post url, "#{requestbody}", :Authorization => "Bearer #{@access_token}", :Content_Type => 'application/json', :Accept => 'application/json' do |response, request, result, &block|
  	@r = response
  end

  if @r.code == 200
    @result = JSON.parse @r
    session[:ccs_id] = @result['id']
  else
    @error = @r
  end
end

# Function which sends signal to either exit, hold or dequeue session.
def send_signal
  
  # Resource URL for Send Signal.
  url = "#{settings.FQDN}/rest/1/Sessions/#{session[:ccs_id]}/Signals"
  
  # Pass the signal paramater in request body.
  requestBody = '{"signal":"' + params[:signal] + '"}'
  
  response = RestClient.post url, "#{requestBody}", :Authorization => "Bearer #{@access_token}", 
  :Content_Type => 'application/json', :Accept => 'application/json'
  
  @signal_result = JSON.parse response
  
rescue => e
  @signal_error = e.message
ensure
  return erb :ccs
end

cms.rb

#!/usr/bin/env ruby

# Licensed by AT&T under 'Software Development Kit Tools Agreement.' 2013 TERMS
# AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION:
# http://developer.att.com/sdk_agreement/ Copyright 2013 AT&T Intellectual
# Property. All rights reserved. http://developer.att.com For more information
# contact [email protected]

require 'rubygems'
require 'sinatra'
require 'open-uri'
require 'sinatra/config_file'
require 'cgi'
require 'att/codekit'

include Att::Codekit

enable :sessions

config_file 'config.yml'

set :port, settings.port
set :protection, :except => :frame_options

SCOPE = 'CMS'

#An array of all the methods our script supports
SCRIPT_METHODS = settings.script_methods.split(",")

#Set the proxy that's used in att/codekit
RestClient.proxy = settings.proxy

#setup our oauth service
configure do
  begin
    FILE_SUPPORT = (settings.tokens_file && !settings.tokens_file.strip.empty?)
    FILE_EXISTS = FILE_SUPPORT && File.file?(settings.tokens_file)

    OAuth = Auth::ClientCred.new(settings.FQDN, 
                                 settings.api_key, 
                                 settings.secret_key)

    if FILE_EXISTS 
      @@token = Auth::OAuthToken.load(settings.tokens_file)
    else
      @@token = OAuth.createToken(SCOPE)
    end
    Auth::OAuthToken.save(settings.tokens_file, @@token) if FILE_SUPPORT
  rescue Exception => e
    @error = e.message
  end
end

#load our file for display before anything
before do
  read_script
  begin
    if @@token.expired?
      @@token = OAuth.refreshToken(@@token)
      Auth::OAuthToken.save(settings.tokens_file, @@token) if FILE_SUPPORT
    end
  rescue Exception => e
    @error = e.message
  end
end

# On start of application clear any session id value and read scripts.
get '/' do
  clear_session_variables
  erb :cms
end

post '/CreateSession' do
  begin
    create_session unless params[:btnCreateSession].nil? 
  rescue Exception => e
    @error = e.message
  end
  erb :cms
end

post '/SendSignal' do
  begin
    service = Service::CMSService.new(settings.FQDN, @@token)

    if params[:scriptType].nil?
      @signal_result = service.sendSignal(session[:cms_id], params[:signal])
    end
  rescue Exception => e
    @signal_error = e.message
  end
  erb :cms
end

def clear_session_variables
  session[:txtNumberToDial] = nil
  session[:txtMessageToPlay] = nil
  session[:txtNumber] = nil
  session[:cms_id] = nil
end

# Function to get contents of selected script file.
def getContentsFromFile filetoread
  return File.read(Dir.pwd + '/' + filetoread)
end

def read_script
  # Populate Feature 1: Outbound voice/message Session text area with contents of Script.rb script. 
  @firstscript = 'First.rb'
  @outbound = getContentsFromFile @firstscript
end

# Function to create session for outbound voice and messaging.
def create_session
  # Script variables for First.rb.
  numberToDial = session[:txtNumberToDial] = CGI.escapeHTML(params[:txtNumberToDial])
  messageToPlay = session[:txtMessageToPlay] = CGI.escapeHTML(params[:txtMessageToPlay])
  numberVar = session[:txtNumber] = CGI.escapeHTML(params[:txtNumber])
  scriptType = session[:scriptType] = CGI.escapeHTML(params[:scriptType])


  # Pass the script variable for First.rb in request body.
  requestbody = {
    'feature' => scriptType, 
    'messageToPlay' => messageToPlay,
    'numberToDial' => numberToDial.to_s,
    'featurenumber' => numberVar.to_s, 
    'smsCallerID' => settings.phoneNumber.to_s,
  }

  begin
    service = Service::CMSService.new(settings.FQDN, @@token)

    @result =  service.create_session(requestbody)

    session[:cms_id] = @result.id
  rescue Exception => e
    @error = e.message 
  end
end

common.rb

# Makes sure that valid access_token is stored in the session. Retrieves new tokens if needed.
def obtain_tokens(fqdn, client_id, client_secret, scope, tokens_file)
  read_tokens(tokens_file)
  
  response = RestClient.post "#{fqdn}/oauth/token", :grant_type => 'client_credentials', :client_id => client_id, :client_secret => client_secret, :scope => scope
    
  from_json = JSON.parse(response.to_str)
  @access_token = from_json['access_token']
  @refresh_token = from_json['refresh_token']
  write_tokens(tokens_file)
end

def write_tokens(tokens_file)
  File.open(tokens_file, 'w+') { |f| f.puts @access_token, @refresh_token }
end

def read_tokens(tokens_file)
  @access_token, @refresh_token, refresh_expiration = File.foreach(tokens_file).first(2).map! &:strip!
rescue
  return
end

config.yml

port:           50100
proxy: 
api_key:        79e76414c689f681ca1e263cbab3761d 
secret_key:     9d31e6b02582bfcf
tokens_file:    tokens 
FQDN:           https://api.att.com
phoneNumber:    +114153401646

script_methods: ,ask,conference,message,reject,transfer,wait

source_link: https://gist.github.com/3723620
download_link: https://github.com/attdevsupport/ATT_APIPlatform_SampleApps/tree/master/RESTFul/CMS/Ruby/app1
help_link: https://raw.github.com/attdevsupport/ATT_APIPlatform_SampleApps/master/RESTFul/CMS/Ruby/app1/README.txt

First.rb

# Utility method for saying individual characters in a string
sayNumber = lambda { |text|
	if text.nil? then
		say "Please enter a valid number"
	else
		text.split("").each do |c|
			say c
		end	
	end
}

messageToPlay = "http://wdev.code-api-att.com:8181/Tropo/music.mp3"

if (defined? $numberToDial).nil?
	say "Welcome to the A T and T Call Management sample application demo."

	smsResult = ask("Please enter a ten digit number to send an S M S to, or press pound to skip",
		{
			:choices => "[10 DIGITS]",
			:terminator => "#",
			:timeout => 10.0,
			:mode => "dtmf",
			:interdigitTimeout => 10.0,
			:onChoice => lambda { |event|
				say "Sending sms to "
			}
		})

	if smsResult.value != "" then
		number = smsResult.value
		sayNumber.call number
		message("Message from AT&T Call Control Sample Application",
			{
				:to => number,
				:network => "SMS",
				:callerID => $currentCall.calledID 
			})
	end

	result20 = ask("Press a digit to listen to what you press or press pound to skip.",
		{
			:choices => "[1 DIGITS]",
			:terminator => "#",
			:timeout => 5.0,
			:mode => "dtmf",
			:interdigitTimeout => 5,
			:onChoice => lambda { |event|
				say "Thank you for entering"
			},
			:onBadChoice => lambda { |event|
				say "Sorry, I am not able to get the digit."
			}
		})

	say result20.value unless result20.value.nil?

	result21 = ask("Press a digit to join 1337 conferencing or press pound to skip.",
		{ 
			:choices => "[1 DIGITS]",
			:terminator => "#",
			:timeout => 5.0,
			:mode => "dtmf",
			:interdigitTimeout => 5,
			:onChoice => lambda { |event|
				say "Thank you for joining 1337 conferencing. To quit, press star at any time."
				conference("1337", 
					{
						:terminator => "*",
						:playTones => true,
						:onChoice => lambda { |event| 
							say "Disconnecting from conference."
						}
					})
			}  
		}
	)

	result24 = ask("Enter a ten digit phone number from which you are calling to reject this call or press pound to skip.",
		{
			:choices => "[10 DIGITS]",
			:terminator => '#',
			:timeout => 120.0,
			:mode => "dtmf",
			:interdigitTimeout => 10,
			:onChoice => lambda { |event|	}
		}
	)

	if result24.value != ""
		numbertest = result24.value
		strippedCID = $currentCall.callerID[2..-1] 
		if strippedCID .eql? numbertest
			say "Your calls will be rejected."
			say "Thank you for using A T and T Call Management sample application demo. Goodbye."
			reject
		else
			say "Number not matched for reject feature."
			say "The current caller I D is "
			sayNumber.call strippedCID
			say " and the number you entered is"
			sayNumber.call numbertest
		end
	end

	result25 = ask("Enter a 10 digit phone number to transfer the call or press pound to skip.",
		{
			:choices => "[10 DIGITS]",
			:terminator => "#",
			:timeout => 120.0,
			:mode => "dtmf",
			:interdigitTimeout => 10,
			:onChoice => lambda { |event| 
			}
		})

	if result25.value != ""
		numbertest = result25.value
		transfernumb = "+1" + numbertest
		say "Transfering to "

		sayNumber.call numbertest

		transfer(transfernumb, 
			{
				:playvalue => messageToPlay,
				:terminator => "*",
				:onCallFailure => lambda { |event|
					say "Unable to transfer. Call failed."
				},
				:onTimeout => lambda { |event|
					say "Unable to transfer. Nobody answered."
				}
			}
		)
	end 

	result27 = ask("Enter the ten digit phone number from which you are calling to wait this call or press pound to skip.", 
		{
			:choices => "[10 DIGITS]", 
			:terminator => "#",
			:timeout => 120.0,
			:mode => "dtmf",
			:interdigitTimeout => 10,
			:onChoice => lambda { |event| 
			}
		})

	if result27.value != ""
		numbertest = result27.value
		strippedCID = $currentCall.callerID[2..-1] 
		if strippedCID .eql? numbertest
			say "Entered number matched with current caller I D."
			say "Will now set the call to wait three seconds."
			wait(3000)
		else
			say "Number not matched for wait feature."
			say "The current caller I D is "

			sat " and the number you entered is"
			sayNumber.call numbertest
		end
	end

	result29 = ask("Press a digit to test the signaling or press pound to skip.",
		{
			:choices => "[1 DIGITS]",
			:terminator => "#",
			:timeout => 5.0,
			:mode => "dtmf",
			:interdigitTimeout => 5,
			:onChoice => lambda { |event|
				say "Waiting for exit signal"
				say(messageToPlay, 
					{
						:allowSignals => "exit",
						:onSignal => lambda { |event1|
							say "Received exit signal, hence the music is paused. Enjoy the music again."
						}
					})
				say "Waiting for stopHold signal"
				say(messageToPlay, 
					{
						:allowSignals => "stopHold",
						:onSignal => lambda { |event2| 
							say "Received stop hold signal, hence the music is paused. Enjoy the music again."
						}
					})
				say "Waiting for deueue signal"
				say(messageToPlay, 
					{
						:allowSignals => "dequeue",
						:onSignal => lambda { |event3| 
							say "Received dequeue signal, hence the music is stopped."
						}
					})
			}
		})

	say "Thank you for using A T and T Call Management sample application demo. Goodbye."
	hangup
else
	call $numberToDial
	say "Welcome to the A T and T Call Management sample application demo."
	case $feature
	when "ask"
		say "The ask feature has been selected."
		result9 = ask("Press four or five digits and press pound when finished.", 
			{
				:choices => "[4-5 DIGITS]",
				:terminator => "#",
				:timeout => 90.0,
				:mode => "dtmf",
				:interdigitTimeout => 5,
				:onChoice => lambda { |event|
					say "Thank you for entering"
				},
				:onBadChoice => lambda { |event|
					say "Sorry, I am not able to get the four or five digits you pressed."
				}
			}
		)
		if result9.value != ""
			sayNumber.call result9.value
		end
	when "conference"
		say "Thank you for joining 1337 conferencing. To quit, press star at any time."
		conference("1337",
			{
				:terminator => "*",
				:playTones => true,
				:onChoice => lambda { |event|
					say "Disconnecting from conference."
				}
			}
		)
	when "reject"
		callID = $currentCall.callerID
		if callID .eql? $featurenumber
			say "Your calls will be rejected."
			say "Thank you for using A T and T Call Management application demo. Goodbye."
			reject
			hangup
		else
			say "Number not matched for reject feature."
			say "The present number is"
			sayNumber.call callID 
			say "and requested number is"
			sayNumber.call $featurenumber 
		end
	when "message"
		if $featurenumber.nil?
			say "Please enter a number to send a message to and try again."
		else
			say "Sending message to"
			sayNumber.call $featurenumber
			say "from caller I D"
			sayNumber.call $smsCallerID
			message("Message from AT&T Call Control Service Sample Application", {
					:to => $featurenumber,
					:network => 'SMS',
					:callerID => $smsCallerID
				})
		end
	when "transfer"
		say "Transfering to"
		sayNumber.call $featurenumber
		transfer($featurenumber,
			{
				:playvalue => messageToPlay,
				:terminator => "*",
				:onCallFailure => lambda { |event|
					say "Unable to transfer. Call failed."
				},
				:onTimeout => lambda { |event|
					say "Unable to transfer. Nobody answered."
				}
			}
		)
	when  "wait"
		callID = $currentCall.callerID
		if callID .eql? $featurenumber 
			say "Present number matched with requested number."
			say "Will now set the call to wait three seconds."
			wait(3000)
		else
			say "Number not matched for wait feature."
			say "The present number is"
			sayNumber.call callID 
			say "and the requested number is"
			sayNumber.call $featurenumber 
		end
	end

	result4 = ask("Press a digit to test the signaling or press pound to skip.",
		{
			:choices => "[1 DIGITS]",
			:terminator => "#",
			:timeout => 5.0,
			:mode => "dtmf",
			:interdigitTimeout => 5,
			:onChoice => lambda { |event|
				say "Waiting for exit signal"
				say(messageToPlay,
					{
						:allowSignals => "exit",
						:onSignal => lambda { |event1|
							say "Received exit signal, hence the music is paused. Enjoy the music again."
						}
					})
				say "Waiting for stopHold signal"
				say(messageToPlay,
					{
						:allowSignals => "stopHold",
						:onSignal => lambda { |event2|
							say "Received stop hold signal, hence the music is paused. Enjoy the music again."
						}
					})
				say "Waiting for dequeue signal"
				say(messageToPlay,
					{
						:allowSignals => "dequeue",
						:onSignal => lambda { |event3|
							say "Received dequeue signal, hence the music is stopped."
						}
					})
			}
		})

	say "Thank you for using the A T and T Call Management sample application demo. Goodbye."
	hangup
end