Created
October 1, 2022 14:57
-
-
Save taf2/cf0cc03d9be63b16cafcd378e9ae90e5 to your computer and use it in GitHub Desktop.
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Linking .pio/build/um_tinys3/firmware.elf | |
| Retrieving maximum program size .pio/build/um_tinys3/firmware.elf | |
| Checking size .pio/build/um_tinys3/firmware.elf | |
| Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" | |
| RAM: [= ] 14.1% (used 46240 bytes from 327680 bytes) | |
| Flash: [== ] 23.6% (used 787149 bytes from 3342336 bytes) | |
| Building .pio/build/um_tinys3/firmware.bin | |
| esptool.py v4.2.1 | |
| Creating esp32s3 image... | |
| Merged 2 ELF sections | |
| Successfully created esp32s3 image. | |
| Configuring upload protocol... | |
| AVAILABLE: cmsis-dap, esp-bridge, esp-builtin, esp-prog, espota, esptool, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa | |
| CURRENT: upload_protocol = esptool | |
| Looking for upload port... | |
| Using manually specified: /dev/cu.usbmodem14101 | |
| Forcing reset using 1200bps open/close on port /dev/cu.usbmodem14101 | |
| Waiting for the new upload port... | |
| Uploading .pio/build/um_tinys3/firmware.bin | |
| esptool.py v4.2.1 | |
| Serial port /dev/cu.usbmodem14101 | |
| Connecting... | |
| Chip is ESP32-S3 | |
| Features: WiFi, BLE | |
| Crystal is 40MHz | |
| MAC: f4:12:fa:4f:a6:90 | |
| Uploading stub... | |
| Running stub... | |
| Stub running... | |
| Changing baud rate to 460800 | |
| Changed. | |
| Configuring flash size... | |
| Flash will be erased from 0x00000000 to 0x00003fff... | |
| Flash will be erased from 0x00008000 to 0x00008fff... | |
| Flash will be erased from 0x0000e000 to 0x0000ffff... | |
| Flash will be erased from 0x00010000 to 0x000d0fff... | |
| Compressed 15040 bytes to 10362... | |
| Writing at 0x00000000... (100 %) | |
| Wrote 15040 bytes (10362 compressed) at 0x00000000 in 0.3 seconds (effective 411.7 kbit/s)... | |
| Hash of data verified. | |
| Compressed 3072 bytes to 129... | |
| Writing at 0x00008000... (100 %) | |
| Wrote 3072 bytes (129 compressed) at 0x00008000 in 0.1 seconds (effective 475.2 kbit/s)... | |
| Hash of data verified. | |
| Compressed 8192 bytes to 47... | |
| Writing at 0x0000e000... (100 %) | |
| Wrote 8192 bytes (47 compressed) at 0x0000e000 in 0.1 seconds (effective 651.4 kbit/s)... | |
| Hash of data verified. | |
| Compressed 787536 bytes to 512652... | |
| Writing at 0x00010000... (3 %) | |
| Writing at 0x0001b77e... (6 %) | |
| Writing at 0x000271d5... (9 %) | |
| Writing at 0x0003520c... (12 %) | |
| Writing at 0x0003b0e5... (15 %) | |
| Writing at 0x000408b8... (18 %) | |
| Writing at 0x00046375... (21 %) | |
| Writing at 0x0004bd20... (25 %) | |
| Writing at 0x000512a9... (28 %) | |
| Writing at 0x000563bc... (31 %) | |
| Writing at 0x0005b404... (34 %) | |
| Writing at 0x000602ec... (37 %) | |
| Writing at 0x000651f9... (40 %) | |
| Writing at 0x0006a189... (43 %) | |
| Writing at 0x0006f2b0... (46 %) | |
| Writing at 0x00074275... (50 %) | |
| Writing at 0x0007923a... (53 %) | |
| Writing at 0x0007dff4... (56 %) | |
| Writing at 0x00083bb3... (59 %) | |
| Writing at 0x000890cf... (62 %) | |
| Writing at 0x0008e359... (65 %) | |
| Writing at 0x000935db... (68 %) | |
| Writing at 0x000984b1... (71 %) | |
| Writing at 0x0009d542... (75 %) | |
| Writing at 0x000a26b0... (78 %) | |
| Writing at 0x000a7b54... (81 %) | |
| Writing at 0x000acf60... (84 %) | |
| Writing at 0x000b2e13... (87 %) | |
| Writing at 0x000b8511... (90 %) | |
| Writing at 0x000c0b87... (93 %) | |
| Writing at 0x000c8fee... (96 %) | |
| Traceback (most recent call last): | |
| File "/usr/local/Cellar/platformio/5.2.2/libexec/lib/python3.9/site-packages/serial/serialposix.py", line 575, in read | |
| buf = os.read(self.fd, size - len(read)) | |
| OSError: [Errno 6] Device not configured | |
| During handling of the above exception, another exception occurred: | |
| Traceback (most recent call last): | |
| File "/Users/taf2/.platformio/packages/tool-esptoolpy/esptool/loader.py", line 375, in command | |
| p = self.read() | |
| File "/Users/taf2/.platformio/packages/tool-esptoolpy/esptool/loader.py", line 307, in read | |
| return next(self._slip_reader) | |
| File "/Users/taf2/.platformio/packages/tool-esptoolpy/esptool/loader.py", line 1402, in slip_reader | |
| read_bytes = port.read(1 if waiting == 0 else waiting) | |
| File "/usr/local/Cellar/platformio/5.2.2/libexec/lib/python3.9/site-packages/serial/serialposix.py", line 581, in read | |
| raise SerialException('read failed: {}'.format(e)) | |
| serial.serialutil.SerialException: read failed: [Errno 6] Device not configured | |
| During handling of the above exception, another exception occurred: | |
| Traceback (most recent call last): | |
| File "/usr/local/Cellar/platformio/5.2.2/libexec/lib/python3.9/site-packages/serial/serialposix.py", line 398, in _reconfigure_port | |
| orig_attr = termios.tcgetattr(self.fd) | |
| termios.error: (6, 'Device not configured') | |
| During handling of the above exception, another exception occurred: | |
| Traceback (most recent call last): | |
| File "/Users/taf2/.platformio/packages/tool-esptoolpy/esptool.py", line 34, in <module> | |
| esptool._main() | |
| File "/Users/taf2/.platformio/packages/tool-esptoolpy/esptool/__init__.py", line 1004, in _main | |
| main() | |
| File "/Users/taf2/.platformio/packages/tool-esptoolpy/esptool/__init__.py", line 806, in main | |
| operation_func(esp, args) | |
| File "/Users/taf2/.platformio/packages/tool-esptoolpy/esptool/cmds.py", line 502, in write_flash | |
| esp.flash_defl_block(block, seq, timeout=timeout) | |
| File "/Users/taf2/.platformio/packages/tool-esptoolpy/esptool/loader.py", line 108, in inner | |
| return func(*args, **kwargs) | |
| File "/Users/taf2/.platformio/packages/tool-esptoolpy/esptool/loader.py", line 963, in flash_defl_block | |
| self.check_command( | |
| File "/Users/taf2/.platformio/packages/tool-esptoolpy/esptool/loader.py", line 406, in check_command | |
| val, data = self.command(op, data, chk, timeout=timeout) | |
| File "/Users/taf2/.platformio/packages/tool-esptoolpy/esptool/loader.py", line 393, in command | |
| self._port.timeout = saved_timeout | |
| File "/usr/local/Cellar/platformio/5.2.2/libexec/lib/python3.9/site-packages/serial/serialutil.py", line 372, in timeout | |
| self._reconfigure_port() | |
| File "/usr/local/Cellar/platformio/5.2.2/libexec/lib/python3.9/site-packages/serial/serialposix.py", line 401, in _reconfigure_port | |
| raise SerialException("Could not configure port: {}".format(msg)) | |
| serial.serialutil.SerialException: Could not configure port: (6, 'Device not configured') | |
| *** [upload] Error 1 | |
| ================================================= [FAILED] Took 33.30 seconds ================================================= | |
| Environment Status Duration | |
| ------------- -------- ------------ | |
| um_tinys3 FAILED 00:00:33.305 | |
| ============================================ 1 failed, 0 succeeded in 00:00:33.305 ============================================ | |
| --- Terminal on /dev/cu.usbmodem14101 | 115200 8-N-1 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Here's a picture of the tinys3 - it's in good condition and connected via usb c to my macbook pro in the background