tagrudev · June 22, 2012 06:20
diff --git a/gistfile1.erb b/gistfile1.erb
 Ubuntu 12.04 Ruby on Rails Development Environment

 I haven't set up an install guide for the latest ubuntu release, largely because the last set of instructions worked pretty closely with the latest and greatest Ubuntu, 12.04 Precise Pangolin, however when installing today, I found that there were enough differences in the way that I configure my setup to justify an update, so here it goes. Yes, I'm late to the party, but a quick google search didn't find anything that I felt was as complete for my requirements as my previous install guides, so here I go.

 As always with my install guides, I have included here is just about everything you'll need (and then some) to get started with ruby on rails development with Ubuntu 12.04 as a platform. These are my settings and preferences, and this is certainly not the only way of doing things, so keep that in mind.

 Step 1: Get the repos ready and run updates.


 sudo apt-get update && sudo apt-get upgrade

 Step 2: Add required applications.


 sudo apt-get install build-essential openssl libreadline6 libreadline6-dev curl git-core zlib1g zlib1g-dev libssl-dev libyaml-dev libsqlite3-0 libsqlite3-dev sqlite3 libxml2-dev libxslt-dev autoconf libc6-dev ncurses-dev automake libtool bison subversion ruby ncurses-term mercurial ruby-dev exuberant-ctags libnotify-bin curl autoconf make automake ssh openjdk-6-jdk git-core git-doc imagemagick postgresql-contrib libpq-dev postgresql pgadmin3 vim vim-rails vim-gnome nodejs

 Step 3: Configure github, because you know everyone is using github.


 git config --global user.name git-username
 git config --global user.email git-email-address
 ssh-keygen -t rsa -C git-email-address

 If you have a github account, you should already know how to add the key that you just generated to your github account. If you don't, please consult github as their documentation is better than mine is. LINK

 Step 4: Install RVM, Ruby and Rails

 This one has actually changed a little bit. You can really go about things the same way as you always did, however you can also run one command and install rvm, ruby 1.9.3 and the latest version of rails, which at the time of this post was 3.2.6.

 curl -L https://get.rvm.io | bash -s stable --rails
 echo '[[ -s "$HOME/.rvm/scripts/rvm" ]] && . "$HOME/.rvm/scripts/rvm" # Load RVM function' >> ~/.bashrc
 source .bashrc

 That's kind of it. You've got a running development environment, but I never stop with just the minimum, and neither should you!

 Step 5: Install some other gems

 You don't need all of these, and most likely, you'll include them in your gemfile for the application you want to use them in, and that's probably the right way, but I usually use these on one app or another that I"m working on, so I'm including them here for reference.

 MY COOL GEM LIST

 heroku taps guard guard-rails guard-test guard-livereload pg capistrano rvm-capistrano devise cancan paperclip simple_form delayed_job rails_admin contact_us qwandry twitter-bootstrap-rails ZURB-foundation annotate pry prawn

 Step 6: Setting up postgres for your rails app access

 At this point, postgresql is set up, however you will need to also configure it for each application that you wish to host on postgresql, so the following steps you will need to repeat for each new application.

 sudo su postgres

 # Create a role for your application #
 # Substitute myapp with your app name and password with your password #
 # Semi-colons are important! #

 psql template1 #starts Postgres interactive shell
 create role myapp with

 createdb login password '_password_'; 
 select * from pg_user; # Verify user created ("\q" to exit!)
 select * from pg_shadow; # sysid and password hash listed here
 \l # list databases
 \q # exit Postgres shell
 exit # exit "Postgres" admin user

 # Configure Postgres to use this user for your application #
 sudo gedit /etc/postgresql/9.1/main/pg_hba.conf

 Scroll down in this file and add the following just before: local all all ident

 local postgres myapp md5
 local "myapp_development" myapp md5
 local "myapp_test" myapp md5
 local "myapp_production" myapp md5

 Now, just restart postgres and make sure your database.yml and Gemfile.rb are configured correctly and you should be all set.

 sudo /etc/init.d/postgresql restart

 ### database.yml a rails app using Postgres ###
 development:
  adapter: postgresql
  encoding: unicode
  database: myapp_development
  pool: 5
  username: myapp
  password: password

 test:
  adapter: postgresql
  encoding: unicode
  database: myapp_test
  pool: 5
  username: myapp
  password: password

 production:
  adapter: postgresql
  encoding: unicode
  database: myapp_production
  pool: 5
  username: myapp
  password: password

 ### Add postgres to your Gemfile ###
 Add: 
  gem 'pg'
 view rawgistfile1.txtThis Gist brought to you by GitHub.
 ### database.yml a rails app using Postgres ###
 development:
  adapter: postgresql
  encoding: unicode
  database: myapp_development
  pool: 5
  username: myapp
  password: password

 test:
  adapter: postgresql
  encoding: unicode
  database: myapp_test
  pool: 5
  username: myapp
  password: password

 production:
  adapter: postgresql
  encoding: unicode
  database: myapp_production
  pool: 5
  username: myapp
  password: password

 ### Add postgres to your Gemfile ###
 Add: 
  gem 'pg'
 view rawgistfile1.txtThis Gist brought to you by GitHub.


 With this done, you should have a fully functioning rails development environment on ubuntu 12.04. At this point, assuming you've made all of the necessary substitutions, you should be able to go into your rails app and execute a rake db:create:all. But if you are interested in adding some more tools to your setup, and really get things moving using some of these extras!

 Development Extras

 Add Gedit-Gmate

 sudo apt-add-repository ppa:ubuntu-on-rails/ppa
 sudo apt-get update
 sudo apt-get install gedit-gmate

 Add Sublime Text 2

 sudo add-apt-repository ppa:webupd8team/sublime-text-2
 sudo apt-get update
 sudo apt-get install sublime-text-2-beta

 Add Retext 1.0 (markdown editor)

 sudo add-apt-repository ppa:mitya57
 sudo apt-get update
 sudo apt-get install retext

 Configure Vim for Rails

 curl -Lo- https://bit.ly/janus-bootstrap | bash

 Add some bash aliases for ease of use

 I always add a few bash aliases that make my time at the command line a bit easier, but they only work if you know them, so if any of these appeal to you, feel free to add them, or add to them in the comments! 

 To make the changes, just enter:

 gedit ~/.bashrc

 Then enter the following at the bottom of the file.

 alias b="bundle"
 alias bu="b update"
 alias be="b exec"
 alias compile="be rake assets:precompile"
 alias edit="sublime-text-2"

 function commit {
  be rake assets:precompile
  git add .
  read -p "Commit description: " desc
  git commit -m "$desc"
  git push
 }

 function newdb {
  be rake db:drop:all
  be rake db:create:all
  be rake db:setup
  be rake db:test:prepare
 }
 view rawrubyplusplus 20-05-2012 Rails Dev Setup Extras - ScriptsThis Gist brought to you by GitHub.
 alias b="bundle"
 alias bu="b update"
 alias be="b exec"
 alias compile="be rake assets:precompile"
 alias edit="sublime-text-2"

 function commit {
  be rake assets:precompile
  git add .
  read -p "Commit description: " desc
  git commit -m "$desc"
  git push
 }

 function newdb {
  be rake db:drop:all
  be rake db:create:all
  be rake db:setup
  be rake db:test:prepare
 }
 view rawrubyplusplus 20-05-2012 Rails Dev Setup Extras - ScriptsThis Gist brought to you by GitHub.


 In conclusion...

 Be sure to check out the livereload plugin for your browser, if you installed the gem, it only makes sense to get it setup on your system. Plugins exist for both Firefox and Google Chrome, which are the two browsers that I use frequently on Ubuntu.

 If you've got any other tips or tools that you use while developing ruby on rails applications on an Ubuntu 11.10 platform, please feel free to add to the comments.
 Posted by Eric Proctor at 11:45 AM  
 Email ThisBlogThis!Share to TwitterShare to Facebook

 Labels: 12.04, how-to, precise pangolin, ruby on rails, ubuntu
 10 comments:


 UnknownJune 20, 2012
 As an alternative to rvm, I've been using the packages from brightbox. It works really well. See blog post at http://blog.brightbox.co.uk/posts/next-generation-ruby-packages-for-ubuntu

 ReplyDelete
 Replies

 Eric ProctorJune 20, 2012
 I've never looked into this before so thanks for the tip. What benefits does this have over rvm? I'm going to read over the post now, I'm just curious if I could get a cheat sheet! :)

 Delete
 Reply

 UnknownJune 21, 2012
 BrightBox packages are great! Why:
 - pre-compiled - if you are using for example Chef, the install time will be much shorer
 - native OS integration - everything is on the right place, easy to switch (ruby-switch utility, using alternatives)
 - support - packages are pretty much up-to-date with all recent patches etc.
 - Easy to use - RVM is based on some cd command hacks, so there is always some hassle, when using the with sudo, ather accounts, scripts etc.

 ReplyDelete

 faitswulffJune 21, 2012
 Thank you for this! You are my hero.

 ReplyDelete
 Replies

 Eric ProctorJune 21, 2012
 I just hope it works out for you as well as it has worked out for me!

 Delete
 Reply

 SoluÃ§Ãµes em Software e TIJune 21, 2012
 Good work!
 Thanks

 ReplyDelete
 Replies

 Eric ProctorJune 21, 2012
 Thanks!

 Delete
 Reply

 Eric ProctorJune 21, 2012
 Hey, to anyone reading this, I just made an important update that I missed. In the initial sudo apt-get install command where I installed a bunch of pre-requisites, I added 'nodejs' to the end of that. Definitely good to have and avoid the "Could not find a javascript runtime error."

 ReplyDelete

 Kevin McCaugheyJune 21, 2012
 Redcar editor is a great setup for Ubuntu. I have it running on 12.04. Doing a "redcar ." in your project has the same effect as it would in textmate and it looks great.

 ReplyDelete
 Replies

 Eric ProctorJune 21, 2012
 Man, to be completely honest, I haven't looked at redcar in a long time. I will add it tonight and give it a shot. For anyone who doesn't know, you can just open a terminal and type:

 gem install redcar

 Delete
 Reply

 Load more...
 The authors at rubyplusplus encourage open discussion about ruby, ruby on rails, programming in general, any post that appears on this site or any other interesting topics related to technology. Please post responsibly.

 Links to this post

  Ubuntu 12.04 Ruby on Rails Development Environment : RubyFlow  
 I know I'm late to the party, but I just couldn't find a guide that documented a rails setup the way that I needed it to, so I just posted an updated Ruby on Rails setup guide for Ubuntu 12.04 LTS, Precise Pangolin. The guide includes the basic ...
 Posted by at June 20, 2012
 Create a Link
	Ubuntu 12.04 Ruby on Rails Development Environment

	I haven't set up an install guide for the latest ubuntu release, largely because the last set of instructions worked pretty closely with the latest and greatest Ubuntu, 12.04 Precise Pangolin, however when installing today, I found that there were enough differences in the way that I configure my setup to justify an update, so here it goes. Yes, I'm late to the party, but a quick google search didn't find anything that I felt was as complete for my requirements as my previous install guides, so here I go.

	As always with my install guides, I have included here is just about everything you'll need (and then some) to get started with ruby on rails development with Ubuntu 12.04 as a platform. These are my settings and preferences, and this is certainly not the only way of doing things, so keep that in mind.

	Step 1: Get the repos ready and run updates.


	sudo apt-get update && sudo apt-get upgrade

	Step 2: Add required applications.


	sudo apt-get install build-essential openssl libreadline6 libreadline6-dev curl git-core zlib1g zlib1g-dev libssl-dev libyaml-dev libsqlite3-0 libsqlite3-dev sqlite3 libxml2-dev libxslt-dev autoconf libc6-dev ncurses-dev automake libtool bison subversion ruby ncurses-term mercurial ruby-dev exuberant-ctags libnotify-bin curl autoconf make automake ssh openjdk-6-jdk git-core git-doc imagemagick postgresql-contrib libpq-dev postgresql pgadmin3 vim vim-rails vim-gnome nodejs

	Step 3: Configure github, because you know everyone is using github.


	git config --global user.name git-username
	git config --global user.email git-email-address
	ssh-keygen -t rsa -C git-email-address

	If you have a github account, you should already know how to add the key that you just generated to your github account. If you don't, please consult github as their documentation is better than mine is. LINK

	Step 4: Install RVM, Ruby and Rails

	This one has actually changed a little bit. You can really go about things the same way as you always did, however you can also run one command and install rvm, ruby 1.9.3 and the latest version of rails, which at the time of this post was 3.2.6.

	curl -L https://get.rvm.io \| bash -s stable --rails
	echo '[[ -s "$HOME/.rvm/scripts/rvm" ]] && . "$HOME/.rvm/scripts/rvm" # Load RVM function' >> ~/.bashrc
	source .bashrc

	That's kind of it. You've got a running development environment, but I never stop with just the minimum, and neither should you!

	Step 5: Install some other gems

	You don't need all of these, and most likely, you'll include them in your gemfile for the application you want to use them in, and that's probably the right way, but I usually use these on one app or another that I"m working on, so I'm including them here for reference.

	MY COOL GEM LIST

	heroku taps guard guard-rails guard-test guard-livereload pg capistrano rvm-capistrano devise cancan paperclip simple_form delayed_job rails_admin contact_us qwandry twitter-bootstrap-rails ZURB-foundation annotate pry prawn

	Step 6: Setting up postgres for your rails app access

	At this point, postgresql is set up, however you will need to also configure it for each application that you wish to host on postgresql, so the following steps you will need to repeat for each new application.

	sudo su postgres

	# Create a role for your application #
	# Substitute myapp with your app name and password with your password #
	# Semi-colons are important! #

	psql template1 #starts Postgres interactive shell
	create role myapp with

	createdb login password '_password_';
	select * from pg_user; # Verify user created ("\q" to exit!)
	select * from pg_shadow; # sysid and password hash listed here
	\l # list databases
	\q # exit Postgres shell
	exit # exit "Postgres" admin user

	# Configure Postgres to use this user for your application #
	sudo gedit /etc/postgresql/9.1/main/pg_hba.conf

	Scroll down in this file and add the following just before: local all all ident

	local postgres myapp md5
	local "myapp_development" myapp md5
	local "myapp_test" myapp md5
	local "myapp_production" myapp md5

	Now, just restart postgres and make sure your database.yml and Gemfile.rb are configured correctly and you should be all set.

	sudo /etc/init.d/postgresql restart

	### database.yml a rails app using Postgres ###
	development:
	adapter: postgresql
	encoding: unicode
	database: myapp_development
	pool: 5
	username: myapp
	password: password

	test:
	adapter: postgresql
	encoding: unicode
	database: myapp_test
	pool: 5
	username: myapp
	password: password

	production:
	adapter: postgresql
	encoding: unicode
	database: myapp_production
	pool: 5
	username: myapp
	password: password

	### Add postgres to your Gemfile ###
	Add:
	gem 'pg'
	view rawgistfile1.txtThis Gist brought to you by GitHub.
	### database.yml a rails app using Postgres ###
	development:
	adapter: postgresql
	encoding: unicode
	database: myapp_development
	pool: 5
	username: myapp
	password: password

	test:
	adapter: postgresql
	encoding: unicode
	database: myapp_test
	pool: 5
	username: myapp
	password: password

	production:
	adapter: postgresql
	encoding: unicode
	database: myapp_production
	pool: 5
	username: myapp
	password: password

	### Add postgres to your Gemfile ###
	Add:
	gem 'pg'
	view rawgistfile1.txtThis Gist brought to you by GitHub.


	With this done, you should have a fully functioning rails development environment on ubuntu 12.04. At this point, assuming you've made all of the necessary substitutions, you should be able to go into your rails app and execute a rake db:create:all. But if you are interested in adding some more tools to your setup, and really get things moving using some of these extras!

	Development Extras

	Add Gedit-Gmate

	sudo apt-add-repository ppa:ubuntu-on-rails/ppa
	sudo apt-get update
	sudo apt-get install gedit-gmate

	Add Sublime Text 2

	sudo add-apt-repository ppa:webupd8team/sublime-text-2
	sudo apt-get update
	sudo apt-get install sublime-text-2-beta

	Add Retext 1.0 (markdown editor)

	sudo add-apt-repository ppa:mitya57
	sudo apt-get update
	sudo apt-get install retext

	Configure Vim for Rails

	curl -Lo- https://bit.ly/janus-bootstrap \| bash

	Add some bash aliases for ease of use

	I always add a few bash aliases that make my time at the command line a bit easier, but they only work if you know them, so if any of these appeal to you, feel free to add them, or add to them in the comments!

	To make the changes, just enter:

	gedit ~/.bashrc

	Then enter the following at the bottom of the file.

	alias b="bundle"
	alias bu="b update"
	alias be="b exec"
	alias compile="be rake assets:precompile"
	alias edit="sublime-text-2"

	function commit {
	be rake assets:precompile
	git add .
	read -p "Commit description: " desc
	git commit -m "$desc"
	git push
	}

	function newdb {
	be rake db:drop:all
	be rake db:create:all
	be rake db:setup
	be rake db:test:prepare
	}
	view rawrubyplusplus 20-05-2012 Rails Dev Setup Extras - ScriptsThis Gist brought to you by GitHub.
	alias b="bundle"
	alias bu="b update"
	alias be="b exec"
	alias compile="be rake assets:precompile"
	alias edit="sublime-text-2"

	function commit {
	be rake assets:precompile
	git add .
	read -p "Commit description: " desc
	git commit -m "$desc"
	git push
	}

	function newdb {
	be rake db:drop:all
	be rake db:create:all
	be rake db:setup
	be rake db:test:prepare
	}
	view rawrubyplusplus 20-05-2012 Rails Dev Setup Extras - ScriptsThis Gist brought to you by GitHub.


	In conclusion...

	Be sure to check out the livereload plugin for your browser, if you installed the gem, it only makes sense to get it setup on your system. Plugins exist for both Firefox and Google Chrome, which are the two browsers that I use frequently on Ubuntu.

	If you've got any other tips or tools that you use while developing ruby on rails applications on an Ubuntu 11.10 platform, please feel free to add to the comments.
	Posted by Eric Proctor at 11:45 AM
	Email ThisBlogThis!Share to TwitterShare to Facebook

	Labels: 12.04, how-to, precise pangolin, ruby on rails, ubuntu
	10 comments:


	UnknownJune 20, 2012
	As an alternative to rvm, I've been using the packages from brightbox. It works really well. See blog post at http://blog.brightbox.co.uk/posts/next-generation-ruby-packages-for-ubuntu

	ReplyDelete
	Replies

	Eric ProctorJune 20, 2012
	I've never looked into this before so thanks for the tip. What benefits does this have over rvm? I'm going to read over the post now, I'm just curious if I could get a cheat sheet! :)

	Delete
	Reply

	UnknownJune 21, 2012
	BrightBox packages are great! Why:
	- pre-compiled - if you are using for example Chef, the install time will be much shorer
	- native OS integration - everything is on the right place, easy to switch (ruby-switch utility, using alternatives)
	- support - packages are pretty much up-to-date with all recent patches etc.
	- Easy to use - RVM is based on some cd command hacks, so there is always some hassle, when using the with sudo, ather accounts, scripts etc.

	ReplyDelete

	faitswulffJune 21, 2012
	Thank you for this! You are my hero.

	ReplyDelete
	Replies

	Eric ProctorJune 21, 2012
	I just hope it works out for you as well as it has worked out for me!

	Delete
	Reply

	SoluÃ§Ãµes em Software e TIJune 21, 2012
	Good work!
	Thanks

	ReplyDelete
	Replies

	Eric ProctorJune 21, 2012
	Thanks!

	Delete
	Reply

	Eric ProctorJune 21, 2012
	Hey, to anyone reading this, I just made an important update that I missed. In the initial sudo apt-get install command where I installed a bunch of pre-requisites, I added 'nodejs' to the end of that. Definitely good to have and avoid the "Could not find a javascript runtime error."

	ReplyDelete

	Kevin McCaugheyJune 21, 2012
	Redcar editor is a great setup for Ubuntu. I have it running on 12.04. Doing a "redcar ." in your project has the same effect as it would in textmate and it looks great.

	ReplyDelete
	Replies

	Eric ProctorJune 21, 2012
	Man, to be completely honest, I haven't looked at redcar in a long time. I will add it tonight and give it a shot. For anyone who doesn't know, you can just open a terminal and type:

	gem install redcar

	Delete
	Reply

	Load more...
	The authors at rubyplusplus encourage open discussion about ruby, ruby on rails, programming in general, any post that appears on this site or any other interesting topics related to technology. Please post responsibly.

	Links to this post

	Ubuntu 12.04 Ruby on Rails Development Environment : RubyFlow
	I know I'm late to the party, but I just couldn't find a guide that documented a rails setup the way that I needed it to, so I just posted an updated Ruby on Rails setup guide for Ubuntu 12.04 LTS, Precise Pangolin. The guide includes the basic ...
	Posted by at June 20, 2012
	Create a Link