EEprom settings

EEprom settings

>>> M503
SENDING:M503
echo:Steps per unit:
echo:  M92 X80.00 Y80.00 Z4000.00 E152.00
echo:Maximum feedrates (mm/s):
echo:  M203 X1000.00 Y1000.00 Z2.80 E25.00
echo:Maximum Acceleration (mm/s2):
echo:  M201 X3000 Y3000 Z100 E10000
echo:Accelerations: P=printing, R=retract and T=travel
echo:  M204 P1000.00 R3000.00 T1000.00
echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s),  Z=maximum Z jerk (mm/s),  E=maximum E jerk (mm/s)
echo:  M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00
echo:Home offset (mm):
echo:  M206 X0.00 Y0.00 Z0.00
echo:Material heatup parameters:
echo:  M145 S0 H200 B50 F0
echo:  M145 S1 H240 B110 F0
echo:PID settings:
echo:  M301 P22.20 I1.08 D114.00 C100.00 L20
echo:Filament settings: Disabled
echo:  M200 D1.75
echo:  M200 D0
echo:Z-Probe Offset (mm):
echo:  M851 Z0.00