wifi24

wifi24.sh

########### on all devices #########

# install the driver for rtl-8811
sudo apt install rtl8812au-dkms
# load the driver
sudo modprobe 8812au
# disable network manager
sudo systemctl stop NetworkManager && sudo systemctl disable NetworkManager

########### on ap only #############

# commands for broadcast ap in 2.4GHz
sudo create_ap -n --ieee80211n --ht_capab '[HT20]'  wlxe84e0647425a inc_licheng_test netcod99 -c 6 -g 192.168.12.1

# tip1: some times the chip will fail to broadcast ap because of unknown reason, replug the adaptor may resolve
# tip2: using other [ht] configuration may increase the throughput.

########### on ap finished ##########

##########  on client only #########

# commands for connect 
# create a configuration for connect
nano wifipass.conf
## file start ##
network={
        ssid="inc_licheng_test"
        psk="netcod99"
}
## file end ##

# connect to ap
sudo wpa_supplicant -c ./wifiwpa.conf -i wlxe84e06476fc2

# assign an ip in the same subnet as the ap (seems the ip will not be configured automatically, we need to do it manually)
sudo ip addr add 192.168.12.2/24 dev wlxe84e06476fc2

########### on client finished #############


# do iperf tests