Skip to content

Instantly share code, notes, and snippets.

@tazjin

tazjin/gist:8d511e9ad7b00ffd1ce4

Created May 23, 2015 17:41
Show Gist options
  • Save tazjin/8d511e9ad7b00ffd1ce4 to your computer and use it in GitHub Desktop.
Save tazjin/8d511e9ad7b00ffd1ce4 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
gistfile1.txt
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.0.2-1-ARCH (builduser@tobias) (gcc version 5.1.0 (GCC) ) #1 SMP PREEMPT Thu May 7 06:47:54 CEST 2015
[ 0.000000] Command line: initrd=\initramfs-linux.img cryptdevice=UUID=b484cf1e-a27b-4785-8bd6-fa85a004b073:stallo root=UUID=d01950ec-8d8b-447e-b9cb-509d8d7e8ba0
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009e301fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009e302000-0x000000009e308fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009e309000-0x000000009e768fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009e769000-0x000000009ebd8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009ebd9000-0x00000000bda30fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bda31000-0x00000000bdd75fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bdd76000-0x00000000bdd93fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bdd94000-0x00000000be2b7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000be2b8000-0x00000000beffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000befff000-0x00000000beffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x9c49e018-0x9c4bfc57] usable ==> usable
[ 0.000000] e820: update [mem 0x9c48c018-0x9c49d057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000009c48c017] usable
[ 0.000000] reserve setup_data: [mem 0x000000009c48c018-0x000000009c49d057] usable
[ 0.000000] reserve setup_data: [mem 0x000000009c49d058-0x000000009c49e017] usable
[ 0.000000] reserve setup_data: [mem 0x000000009c49e018-0x000000009c4bfc57] usable
[ 0.000000] reserve setup_data: [mem 0x000000009c4bfc58-0x000000009e301fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009e302000-0x000000009e308fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000009e309000-0x000000009e768fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009e769000-0x000000009ebd8fff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009ebd9000-0x00000000bda30fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bda31000-0x00000000bdd75fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000bdd76000-0x00000000bdd93fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000bdd94000-0x00000000be2b7fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000be2b8000-0x00000000beffefff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000befff000-0x00000000beffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000023effffff] usable
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0xbdd7c000 ACPI=0xbdd7c000 SMBIOS=0xf04d0 MPS=0xfd5d0
[ 0.000000] efi: mem00: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000008000) (0MB)
[ 0.000000] efi: mem01: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000008000-0x000000000000e000) (0MB)
[ 0.000000] efi: mem02: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000000000e000-0x0000000000058000) (0MB)
[ 0.000000] efi: mem03: [Reserved | | | | | |WB|WT|WC|UC] range=[0x0000000000058000-0x0000000000059000) (0MB)
[ 0.000000] efi: mem04: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000059000-0x000000000005f000) (0MB)
[ 0.000000] efi: mem05: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000000005f000-0x0000000000060000) (0MB)
[ 0.000000] efi: mem06: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000060000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem07: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem08: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem09: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000001000000-0x0000000001e28000) (14MB)
[ 0.000000] efi: mem10: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000001e28000-0x000000007f7a3000) (2009MB)
[ 0.000000] efi: mem11: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000007f7a3000-0x0000000080000000) (8MB)
[ 0.000000] efi: mem12: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000080000000-0x000000009abfc000) (427MB)
[ 0.000000] efi: mem13: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009abfc000-0x000000009acfc000) (1MB)
[ 0.000000] efi: mem14: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009acfc000-0x000000009c48c000) (23MB)
[ 0.000000] efi: mem15: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c48c000-0x000000009c4c0000) (0MB)
[ 0.000000] efi: mem16: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x000000009c4c0000-0x000000009e302000) (30MB)
[ 0.000000] efi: mem17: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x000000009e302000-0x000000009e309000) (0MB)
[ 0.000000] efi: mem18: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009e309000-0x000000009e46a000) (1MB)
[ 0.000000] efi: mem19: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009e46a000-0x000000009e72e000) (2MB)
[ 0.000000] efi: mem20: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009e72e000-0x000000009e733000) (0MB)
[ 0.000000] efi: mem21: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009e733000-0x000000009e737000) (0MB)
[ 0.000000] efi: mem22: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009e737000-0x000000009e74c000) (0MB)
[ 0.000000] efi: mem23: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009e74c000-0x000000009e75e000) (0MB)
[ 0.000000] efi: mem24: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009e75e000-0x000000009e769000) (0MB)
[ 0.000000] efi: mem25: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x000000009e769000-0x000000009ebd9000) (4MB)
[ 0.000000] efi: mem26: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009ebd9000-0x000000009ebec000) (0MB)
[ 0.000000] efi: mem27: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009ebec000-0x000000009ebf3000) (0MB)
[ 0.000000] efi: mem28: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009ebf3000-0x000000009ebfb000) (0MB)
[ 0.000000] efi: mem29: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009ebfb000-0x00000000af9a0000) (269MB)
[ 0.000000] efi: mem30: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000af9a0000-0x00000000afba0000) (2MB)
[ 0.000000] efi: mem31: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000afba0000-0x00000000afbae000) (0MB)
[ 0.000000] efi: mem32: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000afbae000-0x00000000afbc9000) (0MB)
[ 0.000000] efi: mem33: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000afbc9000-0x00000000afbd0000) (0MB)
[ 0.000000] efi: mem34: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000afbd0000-0x00000000afbff000) (0MB)
[ 0.000000] efi: mem35: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000afbff000-0x00000000afc12000) (0MB)
[ 0.000000] efi: mem36: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000afc12000-0x00000000afc8c000) (0MB)
[ 0.000000] efi: mem37: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000afc8c000-0x00000000afcaf000) (0MB)
[ 0.000000] efi: mem38: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000afcaf000-0x00000000afccb000) (0MB)
[ 0.000000] efi: mem39: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000afccb000-0x00000000afcd8000) (0MB)
[ 0.000000] efi: mem40: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000afcd8000-0x00000000afd0b000) (0MB)
[ 0.000000] efi: mem41: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000afd0b000-0x00000000afd26000) (0MB)
[ 0.000000] efi: mem42: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000afd26000-0x00000000afd60000) (0MB)
[ 0.000000] efi: mem43: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000afd60000-0x00000000afd83000) (0MB)
[ 0.000000] efi: mem44: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000afd83000-0x00000000afdc5000) (0MB)
[ 0.000000] efi: mem45: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000afdc5000-0x00000000afde2000) (0MB)
[ 0.000000] efi: mem46: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000afde2000-0x00000000aff1e000) (1MB)
[ 0.000000] efi: mem47: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000aff1e000-0x00000000aff2c000) (0MB)
[ 0.000000] efi: mem48: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000aff2c000-0x00000000aff47000) (0MB)
[ 0.000000] efi: mem49: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000aff47000-0x00000000aff4e000) (0MB)
[ 0.000000] efi: mem50: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000aff4e000-0x00000000aff7d000) (0MB)
[ 0.000000] efi: mem51: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000aff7d000-0x00000000aff90000) (0MB)
[ 0.000000] efi: mem52: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000aff90000-0x00000000b000a000) (0MB)
[ 0.000000] efi: mem53: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b000a000-0x00000000b002d000) (0MB)
[ 0.000000] efi: mem54: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b002d000-0x00000000b0048000) (0MB)
[ 0.000000] efi: mem55: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0048000-0x00000000b0055000) (0MB)
[ 0.000000] efi: mem56: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0055000-0x00000000b0088000) (0MB)
[ 0.000000] efi: mem57: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0088000-0x00000000b00a3000) (0MB)
[ 0.000000] efi: mem58: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b00a3000-0x00000000b00db000) (0MB)
[ 0.000000] efi: mem59: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b00db000-0x00000000b00fe000) (0MB)
[ 0.000000] efi: mem60: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b00fe000-0x00000000b0141000) (0MB)
[ 0.000000] efi: mem61: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0141000-0x00000000b015e000) (0MB)
[ 0.000000] efi: mem62: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b015e000-0x00000000b0299000) (1MB)
[ 0.000000] efi: mem63: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0299000-0x00000000b02a7000) (0MB)
[ 0.000000] efi: mem64: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b02a7000-0x00000000b02c3000) (0MB)
[ 0.000000] efi: mem65: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b02c3000-0x00000000b02ca000) (0MB)
[ 0.000000] efi: mem66: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b02ca000-0x00000000b02f9000) (0MB)
[ 0.000000] efi: mem67: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b02f9000-0x00000000b030c000) (0MB)
[ 0.000000] efi: mem68: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b030c000-0x00000000b0387000) (0MB)
[ 0.000000] efi: mem69: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0387000-0x00000000b03aa000) (0MB)
[ 0.000000] efi: mem70: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b03aa000-0x00000000b03c5000) (0MB)
[ 0.000000] efi: mem71: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b03c5000-0x00000000b03d2000) (0MB)
[ 0.000000] efi: mem72: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b03d2000-0x00000000b0405000) (0MB)
[ 0.000000] efi: mem73: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0405000-0x00000000b0420000) (0MB)
[ 0.000000] efi: mem74: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0420000-0x00000000b0458000) (0MB)
[ 0.000000] efi: mem75: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0458000-0x00000000b047b000) (0MB)
[ 0.000000] efi: mem76: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b047b000-0x00000000b04bd000) (0MB)
[ 0.000000] efi: mem77: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b04bd000-0x00000000b04da000) (0MB)
[ 0.000000] efi: mem78: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b04da000-0x00000000b0616000) (1MB)
[ 0.000000] efi: mem79: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0616000-0x00000000b0624000) (0MB)
[ 0.000000] efi: mem80: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0624000-0x00000000b0641000) (0MB)
[ 0.000000] efi: mem81: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0641000-0x00000000b0648000) (0MB)
[ 0.000000] efi: mem82: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0648000-0x00000000b0675000) (0MB)
[ 0.000000] efi: mem83: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0675000-0x00000000b0688000) (0MB)
[ 0.000000] efi: mem84: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0688000-0x00000000b0704000) (0MB)
[ 0.000000] efi: mem85: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0704000-0x00000000b0727000) (0MB)
[ 0.000000] efi: mem86: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0727000-0x00000000b0744000) (0MB)
[ 0.000000] efi: mem87: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0744000-0x00000000b0751000) (0MB)
[ 0.000000] efi: mem88: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0751000-0x00000000b0782000) (0MB)
[ 0.000000] efi: mem89: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0782000-0x00000000b079d000) (0MB)
[ 0.000000] efi: mem90: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b079d000-0x00000000b07d7000) (0MB)
[ 0.000000] efi: mem91: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b07d7000-0x00000000b07fa000) (0MB)
[ 0.000000] efi: mem92: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b07fa000-0x00000000b083c000) (0MB)
[ 0.000000] efi: mem93: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b083c000-0x00000000b0859000) (0MB)
[ 0.000000] efi: mem94: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0859000-0x00000000b0995000) (1MB)
[ 0.000000] efi: mem95: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0995000-0x00000000b09a3000) (0MB)
[ 0.000000] efi: mem96: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b09a3000-0x00000000b09be000) (0MB)
[ 0.000000] efi: mem97: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b09be000-0x00000000b09c5000) (0MB)
[ 0.000000] efi: mem98: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b09c5000-0x00000000b09f3000) (0MB)
[ 0.000000] efi: mem99: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b09f3000-0x00000000b0a06000) (0MB)
[ 0.000000] efi: mem100: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0a06000-0x00000000b0a83000) (0MB)
[ 0.000000] efi: mem101: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0a83000-0x00000000b0aa6000) (0MB)
[ 0.000000] efi: mem102: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0aa6000-0x00000000b0ac1000) (0MB)
[ 0.000000] efi: mem103: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0ac1000-0x00000000b0ace000) (0MB)
[ 0.000000] efi: mem104: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0ace000-0x00000000b0b02000) (0MB)
[ 0.000000] efi: mem105: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0b02000-0x00000000b0b1d000) (0MB)
[ 0.000000] efi: mem106: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0b1d000-0x00000000b0b56000) (0MB)
[ 0.000000] efi: mem107: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0b56000-0x00000000b0b79000) (0MB)
[ 0.000000] efi: mem108: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0b79000-0x00000000b0bb9000) (0MB)
[ 0.000000] efi: mem109: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0bb9000-0x00000000b0bd6000) (0MB)
[ 0.000000] efi: mem110: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0bd6000-0x00000000b0c82000) (0MB)
[ 0.000000] efi: mem111: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0c82000-0x00000000b0cd2000) (0MB)
[ 0.000000] efi: mem112: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0cd2000-0x00000000b0d14000) (0MB)
[ 0.000000] efi: mem113: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0d14000-0x00000000b0d22000) (0MB)
[ 0.000000] efi: mem114: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0d22000-0x00000000b0d3d000) (0MB)
[ 0.000000] efi: mem115: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0d3d000-0x00000000b0d44000) (0MB)
[ 0.000000] efi: mem116: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0d44000-0x00000000b0d73000) (0MB)
[ 0.000000] efi: mem117: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0d73000-0x00000000b0d86000) (0MB)
[ 0.000000] efi: mem118: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0d86000-0x00000000b0e00000) (0MB)
[ 0.000000] efi: mem119: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0e00000-0x00000000b0e23000) (0MB)
[ 0.000000] efi: mem120: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0e23000-0x00000000b0e3e000) (0MB)
[ 0.000000] efi: mem121: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0e3e000-0x00000000b0e43000) (0MB)
[ 0.000000] efi: mem122: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0e43000-0x00000000b0e80000) (0MB)
[ 0.000000] efi: mem123: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0e80000-0x00000000b0e9b000) (0MB)
[ 0.000000] efi: mem124: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0e9b000-0x00000000b0ed2000) (0MB)
[ 0.000000] efi: mem125: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0ed2000-0x00000000b0ef5000) (0MB)
[ 0.000000] efi: mem126: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0ef5000-0x00000000b0f38000) (0MB)
[ 0.000000] efi: mem127: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0f38000-0x00000000b0f55000) (0MB)
[ 0.000000] efi: mem128: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0f55000-0x00000000b0f74000) (0MB)
[ 0.000000] efi: mem129: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0f74000-0x00000000b0f85000) (0MB)
[ 0.000000] efi: mem130: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0f85000-0x00000000b10d0000) (1MB)
[ 0.000000] efi: mem131: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b10d0000-0x00000000b10d7000) (0MB)
[ 0.000000] efi: mem132: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b10d7000-0x00000000b11d2000) (0MB)
[ 0.000000] efi: mem133: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b11d2000-0x00000000b11df000) (0MB)
[ 0.000000] efi: mem134: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b11df000-0x00000000b1212000) (0MB)
[ 0.000000] efi: mem135: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1212000-0x00000000b121a000) (0MB)
[ 0.000000] efi: mem136: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b121a000-0x00000000b12cb000) (0MB)
[ 0.000000] efi: mem137: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b12cb000-0x00000000b12cd000) (0MB)
[ 0.000000] efi: mem138: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b12cd000-0x00000000b139a000) (0MB)
[ 0.000000] efi: mem139: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b139a000-0x00000000b139d000) (0MB)
[ 0.000000] efi: mem140: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b139d000-0x00000000b1452000) (0MB)
[ 0.000000] efi: mem141: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1452000-0x00000000b1459000) (0MB)
[ 0.000000] efi: mem142: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1459000-0x00000000b1488000) (0MB)
[ 0.000000] efi: mem143: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1488000-0x00000000b148d000) (0MB)
[ 0.000000] efi: mem144: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b148d000-0x00000000b1515000) (0MB)
[ 0.000000] efi: mem145: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1515000-0x00000000b1518000) (0MB)
[ 0.000000] efi: mem146: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1518000-0x00000000b16d6000) (1MB)
[ 0.000000] efi: mem147: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b16d6000-0x00000000b16db000) (0MB)
[ 0.000000] efi: mem148: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b16db000-0x00000000b17e7000) (1MB)
[ 0.000000] efi: mem149: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b17e7000-0x00000000b17ec000) (0MB)
[ 0.000000] efi: mem150: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b17ec000-0x00000000b192a000) (1MB)
[ 0.000000] efi: mem151: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b192a000-0x00000000b192c000) (0MB)
[ 0.000000] efi: mem152: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b192c000-0x00000000b1e33000) (5MB)
[ 0.000000] efi: mem153: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1e33000-0x00000000b1e34000) (0MB)
[ 0.000000] efi: mem154: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1e34000-0x00000000b1e43000) (0MB)
[ 0.000000] efi: mem155: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1e43000-0x00000000b1e45000) (0MB)
[ 0.000000] efi: mem156: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1e45000-0x00000000b1f6f000) (1MB)
[ 0.000000] efi: mem157: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1f6f000-0x00000000b1f73000) (0MB)
[ 0.000000] efi: mem158: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1f73000-0x00000000b210f000) (1MB)
[ 0.000000] efi: mem159: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b210f000-0x00000000b211c000) (0MB)
[ 0.000000] efi: mem160: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b211c000-0x00000000b212c000) (0MB)
[ 0.000000] efi: mem161: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b212c000-0x00000000b212d000) (0MB)
[ 0.000000] efi: mem162: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b212d000-0x00000000b21c2000) (0MB)
[ 0.000000] efi: mem163: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b21c2000-0x00000000b21c4000) (0MB)
[ 0.000000] efi: mem164: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b21c4000-0x00000000b21cb000) (0MB)
[ 0.000000] efi: mem165: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b21cb000-0x00000000b21cc000) (0MB)
[ 0.000000] efi: mem166: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b21cc000-0x00000000bba07000) (152MB)
[ 0.000000] efi: mem167: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bba07000-0x00000000bba09000) (0MB)
[ 0.000000] efi: mem168: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bba09000-0x00000000bba0f000) (0MB)
[ 0.000000] efi: mem169: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bba0f000-0x00000000bba11000) (0MB)
[ 0.000000] efi: mem170: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bba11000-0x00000000bba18000) (0MB)
[ 0.000000] efi: mem171: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bba18000-0x00000000bba1a000) (0MB)
[ 0.000000] efi: mem172: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bba1a000-0x00000000bd07f000) (22MB)
[ 0.000000] efi: mem173: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bd07f000-0x00000000bd155000) (0MB)
[ 0.000000] efi: mem174: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bd155000-0x00000000bda31000) (8MB)
[ 0.000000] efi: mem175: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000bda31000-0x00000000bdadc000) (0MB)
[ 0.000000] efi: mem176: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000bdadc000-0x00000000bdd76000) (2MB)
[ 0.000000] efi: mem177: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bdd76000-0x00000000bdd7c000) (0MB)
[ 0.000000] efi: mem178: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bdd7c000-0x00000000bdd94000) (0MB)
[ 0.000000] efi: mem179: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000bdd94000-0x00000000bde9b000) (1MB)
[ 0.000000] efi: mem180: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000bde9b000-0x00000000be2b8000) (4MB)
[ 0.000000] efi: mem181: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000be2b8000-0x00000000be57f000) (2MB)
[ 0.000000] efi: mem182: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000be57f000-0x00000000bee80000) (9MB)
[ 0.000000] efi: mem183: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bee80000-0x00000000bee82000) (0MB)
[ 0.000000] efi: mem184: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bee82000-0x00000000beeb3000) (0MB)
[ 0.000000] efi: mem185: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000beeb3000-0x00000000beeb5000) (0MB)
[ 0.000000] efi: mem186: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000beeb5000-0x00000000bef52000) (0MB)
[ 0.000000] efi: mem187: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bef52000-0x00000000bef74000) (0MB)
[ 0.000000] efi: mem188: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bef74000-0x00000000befff000) (0MB)
[ 0.000000] efi: mem189: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000befff000-0x00000000bf000000) (0MB)
[ 0.000000] efi: mem190: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x000000023f000000) (5104MB)
[ 0.000000] efi: mem191: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[ 0.000000] efi: mem192: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem193: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[ 0.000000] efi: mem194: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem195: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem196: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: ASUS All Series/Z97-PRO, BIOS 2012 09/30/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 0220000000 mask 7FF0000000 write-back
[ 0.000000] 3 base 0230000000 mask 7FF8000000 write-back
[ 0.000000] 4 base 0238000000 mask 7FFC000000 write-back
[ 0.000000] 5 base 023C000000 mask 7FFE000000 write-back
[ 0.000000] 6 base 023E000000 mask 7FFF000000 write-back
[ 0.000000] 7 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd8d0-0x000fd8df] mapped at [ffff8800000fd8d0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b1c000, 0x01b1cfff] PGTABLE
[ 0.000000] BRK [0x01b1d000, 0x01b1dfff] PGTABLE
[ 0.000000] BRK [0x01b1e000, 0x01b1efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23ee00000-0x23effffff]
[ 0.000000] [mem 0x23ee00000-0x23effffff] page 2M
[ 0.000000] BRK [0x01b1f000, 0x01b1ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x220000000-0x23edfffff]
[ 0.000000] [mem 0x220000000-0x23edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff]
[ 0.000000] [mem 0x200000000-0x21fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x9e301fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x9e1fffff] page 2M
[ 0.000000] [mem 0x9e200000-0x9e301fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9e309000-0x9e768fff]
[ 0.000000] [mem 0x9e309000-0x9e3fffff] page 4k
[ 0.000000] [mem 0x9e400000-0x9e5fffff] page 2M
[ 0.000000] [mem 0x9e600000-0x9e768fff] page 4k
[ 0.000000] BRK [0x01b20000, 0x01b20fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x9ebd9000-0xbda30fff]
[ 0.000000] [mem 0x9ebd9000-0x9ebfffff] page 4k
[ 0.000000] [mem 0x9ec00000-0xbd9fffff] page 2M
[ 0.000000] [mem 0xbda00000-0xbda30fff] page 4k
[ 0.000000] BRK [0x01b21000, 0x01b21fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbefff000-0xbeffffff]
[ 0.000000] [mem 0xbefff000-0xbeffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x7f7a3000-0x7fffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000BDD7C000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000BDD7C080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000BDD8B510 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000BDD7C198 00F372 (v02 ALASKA A M I 00000011 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000BE2B7F80 000040
[ 0.000000] ACPI: APIC 0x00000000BDD8B620 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000BDD8B698 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000BDD8B6E0 000C7D (v01 Ther_R Ther_Rvp 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000BDD8C360 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000BDD8C8A0 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 0x00000000BDD8D418 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000BDD8D458 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000BDD8D490 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000BDD8D800 005977 (v01 SaSsdt SaSsdt 00003000 INTL 20120711)
[ 0.000000] ACPI: DMAR 0x00000000BDD931D0 000080 (v01 INTEL BDW 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x23eff8000-0x23effbfff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236600000-ffff88023e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000023effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000009e301fff]
[ 0.000000] node 0: [mem 0x000000009e309000-0x000000009e768fff]
[ 0.000000] node 0: [mem 0x000000009ebd9000-0x00000000bda30fff]
[ 0.000000] node 0: [mem 0x00000000befff000-0x00000000beffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000023effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023effffff]
[ 0.000000] On node 0 totalpages: 2082136
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 24 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12055 pages used for memmap
[ 0.000000] DMA32 zone: 771515 pages, LIFO batch:31
[ 0.000000] Normal zone: 20416 pages used for memmap
[ 0.000000] Normal zone: 1306624 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c48c000-0x9c48cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c49d000-0x9c49dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c49e000-0x9c49efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c4bf000-0x9c4bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e302000-0x9e308fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e769000-0x9ebd8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbda31000-0xbdd75fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbdd76000-0xbdd93fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbdd94000-0xbe2b7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbe2b8000-0xbeffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xbf000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88023ec00000 s86168 r8192 d32616 u524288
[ 0.000000] pcpu-alloc: s86168 r8192 d32616 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2049577
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\initramfs-linux.img cryptdevice=UUID=b484cf1e-a27b-4785-8bd6-fa85a004b073:stallo root=UUID=d01950ec-8d8b-447e-b9cb-509d8d7e8ba0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7881712K/8328544K available (5616K kernel code, 839K rwdata, 1780K rodata, 1160K init, 1152K bss, 446832K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:456 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3200.010 MHz processor
[ 0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 6402.68 BogoMIPS (lpj=10666700)
[ 0.000025] pid_max: default: 32768 minimum: 301
[ 0.000028] ACPI: Core revision 20150204
[ 0.011601] ACPI: All ACPI Tables successfully acquired
[ 0.030590] Security Framework initialized
[ 0.030595] Yama: becoming mindful.
[ 0.030940] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.032493] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.033216] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.033223] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.033399] Initializing cgroup subsys blkio
[ 0.033401] Initializing cgroup subsys memory
[ 0.033406] Initializing cgroup subsys devices
[ 0.033407] Initializing cgroup subsys freezer
[ 0.033409] Initializing cgroup subsys net_cls
[ 0.033426] CPU: Physical Processor ID: 0
[ 0.033427] CPU: Processor Core ID: 0
[ 0.033430] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.033431] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.034172] mce: CPU supports 9 MCE banks
[ 0.034183] CPU0: Thermal monitoring enabled (TM1)
[ 0.034190] process: using mwait in idle threads
[ 0.034193] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.034193] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.034271] Freeing SMP alternatives memory: 20K (ffffffff819f5000 - ffffffff819fa000)
[ 0.039084] ftrace: allocating 21271 entries in 84 pages
[ 0.045423] dmar: Host address width 39
[ 0.045425] dmar: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.045433] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.045434] dmar: RMRR base: 0x000000bdd22000 end: 0x000000bdd2ffff
[ 0.045436] IOAPIC id 8 under DRHD base 0xfed90000 IOMMU 0
[ 0.045436] HPET id 0 under DRHD base 0xfed90000
[ 0.045570] Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
[ 0.045575] Enabled IRQ remapping in xapic mode
[ 0.045576] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.045963] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.078968] TSC deadline timer enabled
[ 0.078970] smpboot: CPU0: Intel(R) Core(TM) i5-4460 CPU @ 3.20GHz (fam: 06, model: 3c, stepping: 03)
[ 0.078987] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.079002] ... version: 3
[ 0.079003] ... bit width: 48
[ 0.079003] ... generic registers: 8
[ 0.079004] ... value mask: 0000ffffffffffff
[ 0.079005] ... max period: 0000ffffffffffff
[ 0.079005] ... fixed-purpose events: 3
[ 0.079006] ... event mask: 00000007000000ff
[ 0.099070] x86: Booting SMP configuration:
[ 0.099071] .... node #0, CPUs: #1
[ 0.112941] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.119623] #2 #3
[ 0.154191] x86: Booted up 1 node, 4 CPUs
[ 0.154194] smpboot: Total of 4 processors activated (25610.75 BogoMIPS)
[ 0.156841] devtmpfs: initialized
[ 0.158459] PM: Registering ACPI NVS region [mem 0x9e302000-0x9e308fff] (28672 bytes)
[ 0.158460] PM: Registering ACPI NVS region [mem 0xbdd94000-0xbe2b7fff] (5390336 bytes)
[ 0.158612] pinctrl core: initialized pinctrl subsystem
[ 0.158645] RTC time: 19:38:20, date: 05/14/15
[ 0.158734] NET: Registered protocol family 16
[ 0.174216] cpuidle: using governor ladder
[ 0.187557] cpuidle: using governor menu
[ 0.187588] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.187589] ACPI: bus type PCI registered
[ 0.187591] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.187640] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.187641] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.187850] PCI: Using configuration type 1 for base access
[ 0.201120] ACPI: Added _OSI(Module Device)
[ 0.201121] ACPI: Added _OSI(Processor Device)
[ 0.201122] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.201123] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.204464] ACPI: Executed 4 blocks of module-level executable AML code
[ 0.207019] ACPI: Dynamic OEM Table Load:
[ 0.207023] ACPI: SSDT 0xFFFF880234DD7800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.207580] ACPI: Dynamic OEM Table Load:
[ 0.207583] ACPI: SSDT 0xFFFF880234DD9800 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.208169] ACPI: Dynamic OEM Table Load:
[ 0.208172] ACPI: SSDT 0xFFFF880234E63A00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.209021] ACPI: Interpreter enabled
[ 0.209027] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
[ 0.209032] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
[ 0.209047] ACPI: (supports S0 S3 S4 S5)
[ 0.209048] ACPI: Using IOAPIC for interrupt routing
[ 0.209067] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.209402] ACPI: Power Resource [PG00] (on)
[ 0.209586] ACPI: Power Resource [PG01] (on)
[ 0.209760] ACPI: Power Resource [PG02] (on)
[ 0.214599] ACPI: Power Resource [FN00] (off)
[ 0.214647] ACPI: Power Resource [FN01] (off)
[ 0.214694] ACPI: Power Resource [FN02] (off)
[ 0.214740] ACPI: Power Resource [FN03] (off)
[ 0.214787] ACPI: Power Resource [FN04] (off)
[ 0.215417] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.215421] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.215567] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.215653] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.215915] PCI host bridge to bus 0000:00
[ 0.215917] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.215918] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.215920] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.215921] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.215922] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.215923] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.215924] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.215925] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.215926] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window]
[ 0.215931] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.215999] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.216027] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.216063] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.216088] pci 0000:00:01.1: [8086:0c05] type 01 class 0x060400
[ 0.216115] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 0.216148] pci 0000:00:01.1: System wakeup disabled by ACPI
[ 0.216190] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
[ 0.216206] pci 0000:00:14.0: reg 0x10: [mem 0xdf420000-0xdf42ffff 64bit]
[ 0.216257] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.216290] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.216318] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
[ 0.216334] pci 0000:00:16.0: reg 0x10: [mem 0xdf43a000-0xdf43a00f 64bit]
[ 0.216388] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.216449] pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
[ 0.216462] pci 0000:00:19.0: reg 0x10: [mem 0xdf400000-0xdf41ffff]
[ 0.216469] pci 0000:00:19.0: reg 0x14: [mem 0xdf438000-0xdf438fff]
[ 0.216475] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
[ 0.216526] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.216560] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.216590] pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
[ 0.216607] pci 0000:00:1a.0: reg 0x10: [mem 0xdf437000-0xdf4373ff]
[ 0.216684] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.216721] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.216749] pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
[ 0.216760] pci 0000:00:1b.0: reg 0x10: [mem 0xdf430000-0xdf433fff 64bit]
[ 0.216811] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.216846] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.216871] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
[ 0.216928] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.216960] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.216986] pci 0000:00:1c.3: [8086:8c96] type 01 class 0x060400
[ 0.217044] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.217075] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.217100] pci 0000:00:1c.6: [8086:8c9c] type 01 class 0x060400
[ 0.217158] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.217189] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.217219] pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
[ 0.217236] pci 0000:00:1d.0: reg 0x10: [mem 0xdf436000-0xdf4363ff]
[ 0.217312] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.217348] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.217376] pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
[ 0.217514] pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
[ 0.217527] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
[ 0.217532] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
[ 0.217538] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
[ 0.217543] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
[ 0.217549] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.217554] pci 0000:00:1f.2: reg 0x24: [mem 0xdf435000-0xdf4357ff]
[ 0.217589] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.217638] pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
[ 0.217649] pci 0000:00:1f.3: reg 0x10: [mem 0xdf434000-0xdf4340ff 64bit]
[ 0.217665] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.217748] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.217784] pci 0000:02:00.0: [10de:1401] type 00 class 0x030000
[ 0.217794] pci 0000:02:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[ 0.217803] pci 0000:02:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.217812] pci 0000:02:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.217819] pci 0000:02:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.217825] pci 0000:02:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
[ 0.217881] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.217911] pci 0000:02:00.1: [10de:0fba] type 00 class 0x040300
[ 0.217920] pci 0000:02:00.1: reg 0x10: [mem 0xdf080000-0xdf083fff]
[ 0.224254] pci 0000:00:01.1: PCI bridge to [bus 02]
[ 0.224256] pci 0000:00:01.1: bridge window [io 0xe000-0xefff]
[ 0.224258] pci 0000:00:01.1: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.224260] pci 0000:00:01.1: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.224334] acpiphp: Slot [1] registered
[ 0.224338] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.224397] pci 0000:04:00.0: [1b21:1184] type 01 class 0x060400
[ 0.224498] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.230922] pci 0000:00:1c.3: PCI bridge to [bus 04-09]
[ 0.230924] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.230927] pci 0000:00:1c.3: bridge window [mem 0xdf100000-0xdf2fffff]
[ 0.231012] pci 0000:05:01.0: [1b21:1184] type 01 class 0x060400
[ 0.231113] pci 0000:05:01.0: PME# supported from D0 D3hot D3cold
[ 0.231171] pci 0000:05:03.0: [1b21:1184] type 01 class 0x060400
[ 0.233649] pci 0000:05:03.0: PME# supported from D0 D3hot D3cold
[ 0.233707] pci 0000:05:05.0: [1b21:1184] type 01 class 0x060400
[ 0.233807] pci 0000:05:05.0: PME# supported from D0 D3hot D3cold
[ 0.233864] pci 0000:05:07.0: [1b21:1184] type 01 class 0x060400
[ 0.233965] pci 0000:05:07.0: PME# supported from D0 D3hot D3cold
[ 0.234034] pci 0000:04:00.0: PCI bridge to [bus 05-09]
[ 0.234040] pci 0000:04:00.0: bridge window [io 0xd000-0xdfff]
[ 0.234043] pci 0000:04:00.0: bridge window [mem 0xdf100000-0xdf2fffff]
[ 0.234099] pci 0000:05:01.0: PCI bridge to [bus 06]
[ 0.234187] pci 0000:07:00.0: [168c:0030] type 00 class 0x028000
[ 0.234216] pci 0000:07:00.0: reg 0x10: [mem 0xdf200000-0xdf21ffff 64bit]
[ 0.234268] pci 0000:07:00.0: reg 0x30: [mem 0xdf220000-0xdf22ffff pref]
[ 0.234366] pci 0000:07:00.0: supports D1
[ 0.234367] pci 0000:07:00.0: PME# supported from D0 D1 D3hot
[ 0.240933] pci 0000:05:03.0: PCI bridge to [bus 07]
[ 0.240941] pci 0000:05:03.0: bridge window [mem 0xdf200000-0xdf2fffff]
[ 0.240999] pci 0000:05:05.0: PCI bridge to [bus 08]
[ 0.241083] pci 0000:09:00.0: [1b21:0612] type 00 class 0x010601
[ 0.241106] pci 0000:09:00.0: reg 0x10: [io 0xd050-0xd057]
[ 0.241119] pci 0000:09:00.0: reg 0x14: [io 0xd040-0xd043]
[ 0.241133] pci 0000:09:00.0: reg 0x18: [io 0xd030-0xd037]
[ 0.241146] pci 0000:09:00.0: reg 0x1c: [io 0xd020-0xd023]
[ 0.241159] pci 0000:09:00.0: reg 0x20: [io 0xd000-0xd01f]
[ 0.241173] pci 0000:09:00.0: reg 0x24: [mem 0xdf100000-0xdf1001ff]
[ 0.247599] pci 0000:05:07.0: PCI bridge to [bus 09]
[ 0.247605] pci 0000:05:07.0: bridge window [io 0xd000-0xdfff]
[ 0.247608] pci 0000:05:07.0: bridge window [mem 0xdf100000-0xdf1fffff]
[ 0.247731] pci 0000:0a:00.0: [1b21:1142] type 00 class 0x0c0330
[ 0.247756] pci 0000:0a:00.0: reg 0x10: [mem 0xdf300000-0xdf307fff 64bit]
[ 0.247879] pci 0000:0a:00.0: PME# supported from D3cold
[ 0.247907] pci 0000:0a:00.0: System wakeup disabled by ACPI
[ 0.254266] pci 0000:00:1c.6: PCI bridge to [bus 0a]
[ 0.254270] pci 0000:00:1c.6: bridge window [mem 0xdf300000-0xdf3fffff]
[ 0.254311] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.254710] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.254743] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.254772] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.254802] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.254831] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.254861] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.254891] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.254921] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[ 0.255111] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.255124] ACPI : EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
[ 0.255188] vgaarb: setting as boot device: PCI:0000:02:00.0
[ 0.255190] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.255191] vgaarb: loaded
[ 0.255192] vgaarb: bridge control possible 0000:02:00.0
[ 0.255260] PCI: Using ACPI for IRQ routing
[ 0.260081] PCI: pci_cache_line_size set to 64 bytes
[ 0.260135] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.260136] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.260136] e820: reserve RAM buffer [mem 0x9c48c018-0x9fffffff]
[ 0.260138] e820: reserve RAM buffer [mem 0x9c49e018-0x9fffffff]
[ 0.260139] e820: reserve RAM buffer [mem 0x9e302000-0x9fffffff]
[ 0.260139] e820: reserve RAM buffer [mem 0x9e769000-0x9fffffff]
[ 0.260140] e820: reserve RAM buffer [mem 0xbda31000-0xbfffffff]
[ 0.260141] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
[ 0.260142] e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
[ 0.260214] NetLabel: Initializing
[ 0.260215] NetLabel: domain hash size = 128
[ 0.260215] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.260223] NetLabel: unlabeled traffic allowed by default
[ 0.260238] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.260241] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.262259] Switched to clocksource hpet
[ 0.265669] pnp: PnP ACPI init
[ 0.265752] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.265755] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.265818] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.265819] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.265839] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.265863] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.265865] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.265930] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.265931] system 00:04: [io 0x02a0-0x02af] has been reserved
[ 0.265932] system 00:04: [io 0x0a00-0x0aff] has been reserved
[ 0.265934] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.265967] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.265968] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.266164] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.266166] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.266167] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.266168] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.266169] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.266170] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.266172] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.266173] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.266174] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.266175] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.266176] system 00:06: [mem 0xdffe0000-0xdffeffff] has been reserved
[ 0.266177] system 00:06: [mem 0xdfff0000-0xdfffffff] has been reserved
[ 0.266179] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.266285] pnp: PnP ACPI: found 7 devices
[ 0.272032] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.272038] pci 0000:00:01.1: PCI bridge to [bus 02]
[ 0.272039] pci 0000:00:01.1: bridge window [io 0xe000-0xefff]
[ 0.272041] pci 0000:00:01.1: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.272043] pci 0000:00:01.1: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.272046] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.272054] pci 0000:05:01.0: PCI bridge to [bus 06]
[ 0.272066] pci 0000:05:03.0: PCI bridge to [bus 07]
[ 0.272070] pci 0000:05:03.0: bridge window [mem 0xdf200000-0xdf2fffff]
[ 0.272078] pci 0000:05:05.0: PCI bridge to [bus 08]
[ 0.272090] pci 0000:05:07.0: PCI bridge to [bus 09]
[ 0.272092] pci 0000:05:07.0: bridge window [io 0xd000-0xdfff]
[ 0.272097] pci 0000:05:07.0: bridge window [mem 0xdf100000-0xdf1fffff]
[ 0.272105] pci 0000:04:00.0: PCI bridge to [bus 05-09]
[ 0.272107] pci 0000:04:00.0: bridge window [io 0xd000-0xdfff]
[ 0.272112] pci 0000:04:00.0: bridge window [mem 0xdf100000-0xdf2fffff]
[ 0.272120] pci 0000:00:1c.3: PCI bridge to [bus 04-09]
[ 0.272122] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.272125] pci 0000:00:1c.3: bridge window [mem 0xdf100000-0xdf2fffff]
[ 0.272130] pci 0000:00:1c.6: PCI bridge to [bus 0a]
[ 0.272133] pci 0000:00:1c.6: bridge window [mem 0xdf300000-0xdf3fffff]
[ 0.272139] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.272140] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.272142] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.272143] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.272144] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.272144] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.272145] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.272147] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xfeafffff window]
[ 0.272148] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.272149] pci_bus 0000:02: resource 1 [mem 0xde000000-0xdf0fffff]
[ 0.272150] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.272151] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.272152] pci_bus 0000:04: resource 1 [mem 0xdf100000-0xdf2fffff]
[ 0.272153] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.272154] pci_bus 0000:05: resource 1 [mem 0xdf100000-0xdf2fffff]
[ 0.272155] pci_bus 0000:07: resource 1 [mem 0xdf200000-0xdf2fffff]
[ 0.272156] pci_bus 0000:09: resource 0 [io 0xd000-0xdfff]
[ 0.272157] pci_bus 0000:09: resource 1 [mem 0xdf100000-0xdf1fffff]
[ 0.272158] pci_bus 0000:0a: resource 1 [mem 0xdf300000-0xdf3fffff]
[ 0.272178] NET: Registered protocol family 2
[ 0.272318] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.272438] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.272601] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.272615] TCP: reno registered
[ 0.272622] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.272648] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.272694] NET: Registered protocol family 1
[ 0.305668] pci 0000:02:00.0: Video device with shadowed ROM
[ 0.305783] PCI: CLS 64 bytes, default 64
[ 0.305813] Unpacking initramfs...
[ 0.404685] Freeing initrd memory: 8564K (ffff88007f7a3000 - ffff880080000000)
[ 0.404711] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.404714] software IO TLB [mem 0xab9a0000-0xaf9a0000] (64MB) mapped at [ffff8800ab9a0000-ffff8800af99ffff]
[ 0.404843] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.404901] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x19
[ 0.404905] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x19
[ 0.404911] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x19
[ 0.404916] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x19
[ 0.404961] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.404986] Scanning for low memory corruption every 60 seconds
[ 0.405165] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.405182] Initialise system trusted keyring
[ 0.405406] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.406344] zpool: loaded
[ 0.406346] zbud: loaded
[ 0.406450] VFS: Disk quotas dquot_6.5.2
[ 0.406472] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.406583] Key type big_key registered
[ 0.406694] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.406717] io scheduler noop registered
[ 0.406719] io scheduler deadline registered
[ 0.406737] io scheduler cfq registered (default)
[ 0.407697] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.407708] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.407718] efifb: probing for efifb
[ 0.407730] efifb: framebuffer at 0xd1000000, mapped to 0xffffc90010f00000, using 1876k, total 1875k
[ 0.407731] efifb: mode is 800x600x32, linelength=3200, pages=1
[ 0.407732] efifb: scrolling: redraw
[ 0.407733] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.409073] Console: switching to colour frame buffer device 100x37
[ 0.410342] fb0: EFI VGA frame buffer device
[ 0.410347] intel_idle: MWAIT substates: 0x42120
[ 0.410348] intel_idle: v0.4 model 0x3C
[ 0.410349] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.410478] GHES: HEST is not enabled!
[ 0.410527] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.410819] Linux agpgart interface v0.103
[ 0.410856] rtc_cmos 00:02: RTC can wake from S4
[ 0.410955] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.410977] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.410984] Intel P-state driver initializing.
[ 0.411085] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.411534] TCP: cubic registered
[ 0.411780] NET: Registered protocol family 10
[ 0.412325] NET: Registered protocol family 17
[ 0.413110] Loading compiled-in X.509 certificates
[ 0.413138] registered taskstats version 1
[ 0.414625] Magic number: 15:641:647
[ 0.414690] acpi LNXCPU:00: hash matches
[ 0.414769] rtc_cmos 00:02: setting system clock to 2015-05-14 19:38:21 UTC (1431632301)
[ 0.414977] PM: Hibernation image not present or could not be loaded.
[ 0.415515] Freeing unused kernel memory: 1160K (ffffffff818d3000 - ffffffff819f5000)
[ 0.415518] Write protecting the kernel read-only data: 8192k
[ 0.416165] Freeing unused kernel memory: 516K (ffff88000157f000 - ffff880001600000)
[ 0.416406] Freeing unused kernel memory: 268K (ffff8800017bd000 - ffff880001800000)
[ 0.428567] random: systemd urandom read with 1 bits of entropy available
[ 0.429208] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 0.429298] systemd[1]: Detected architecture 'x86-64'.
[ 0.429300] systemd[1]: Running in initial RAM disk.
[ 0.429302] systemd[1]: Running with unpopulated /etc.
[ 0.429336] systemd[1]: No hostname configured.
[ 0.429339] systemd[1]: Set hostname to <localhost>.
[ 0.429355] systemd[1]: Initializing machine ID from random generator.
[ 0.430379] systemd[1]: Populated /etc with preset unit settings.
[ 0.432368] systemd[1]: Unit type .busname is not supported on this system.
[ 0.434168] systemd[1]: Reached target Swap.
[ 0.434175] systemd[1]: Starting Swap.
[ 0.434328] systemd[1]: Created slice -.slice.
[ 0.434333] systemd[1]: Starting -.slice.
[ 0.434812] systemd[1]: Listening on Journal Audit Socket.
[ 0.434864] systemd[1]: Reached target Local File Systems.
[ 0.434869] systemd[1]: Starting Local File Systems.
[ 0.434930] systemd[1]: Listening on Journal Socket (/dev/log).
[ 0.434934] systemd[1]: Starting Journal Socket (/dev/log).
[ 0.434986] systemd[1]: Listening on Journal Socket.
[ 0.434991] systemd[1]: Starting Journal Socket.
[ 0.435042] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 0.435046] systemd[1]: Starting LVM2 metadata daemon socket.
[ 0.435067] systemd[1]: Started Dispatch Password Requests to Yubikey Directory Watch.
[ 0.435071] systemd[1]: Starting Dispatch Password Requests to Yubikey Directory Watch.
[ 0.435121] systemd[1]: Listening on udev Control Socket.
[ 0.435125] systemd[1]: Starting udev Control Socket.
[ 0.435145] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 0.435149] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 0.435195] systemd[1]: Listening on udev Kernel Socket.
[ 0.435199] systemd[1]: Starting udev Kernel Socket.
[ 0.435234] systemd[1]: Reached target Sockets.
[ 0.435237] systemd[1]: Starting Sockets.
[ 0.435271] systemd[1]: Reached target Timers.
[ 0.435275] systemd[1]: Starting Timers.
[ 0.435344] systemd[1]: Created slice system.slice.
[ 0.435349] systemd[1]: Starting system.slice.
[ 0.435542] systemd[1]: Starting udev Coldplug all Devices...
[ 0.435839] systemd[1]: Started LVM2 metadata daemon.
[ 0.435858] systemd[1]: Starting LVM2 metadata daemon...
[ 0.436105] systemd[1]: Starting Setup Virtual Console...
[ 0.436175] systemd[1]: Reached target Slices.
[ 0.436182] systemd[1]: Starting Slices.
[ 0.436439] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 0.436595] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[ 0.436601] systemd[1]: Starting system-systemd\x2dcryptsetup.slice.
[ 0.436840] systemd[1]: Starting Journal Service...
[ 0.436906] systemd[1]: Reached target Paths.
[ 0.436914] systemd[1]: Starting Paths.
[ 0.437012] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 0.437017] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 0.438297] systemd-journald[68]: Failed to set file attributes: Inappropriate ioctl for device
[ 0.439052] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 0.439403] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 0.439762] systemd[1]: Started Setup Virtual Console.
[ 0.440353] systemd[1]: Started Create Static Device Nodes in /dev.
[ 0.440626] systemd[1]: Starting udev Kernel Device Manager...
[ 0.442318] systemd[1]: Started udev Kernel Device Manager.
[ 0.443612] systemd[1]: Started udev Coldplug all Devices.
[ 0.447160] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.449323] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.449392] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.452189] systemd[1]: Started Journal Service.
[ 0.452345] ACPI: bus type USB registered
[ 0.452361] usbcore: registered new interface driver usbfs
[ 0.452368] usbcore: registered new interface driver hub
[ 0.452384] usbcore: registered new device driver usb
[ 0.452655] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.452762] ehci-pci: EHCI PCI platform driver
[ 0.452898] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.452901] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.452911] ehci-pci 0000:00:1a.0: debug port 2
[ 0.454186] SCSI subsystem initialized
[ 0.454885] libata version 3.00 loaded.
[ 0.456806] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.456819] ehci-pci 0000:00:1a.0: irq 16, io mem 0xdf437000
[ 0.459261] AVX2 version of gcm_enc/dec engaged.
[ 0.459263] AES CTR mode by8 optimization enabled
[ 0.465652] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.465774] hub 1-0:1.0: USB hub found
[ 0.465777] hub 1-0:1.0: 2 ports detected
[ 0.465972] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.465977] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.465987] ehci-pci 0000:00:1d.0: debug port 2
[ 0.469895] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.469906] ehci-pci 0000:00:1d.0: irq 23, io mem 0xdf436000
[ 0.479021] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.479147] hub 2-0:1.0: USB hub found
[ 0.479152] hub 2-0:1.0: 2 ports detected
[ 0.479322] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.479327] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.479523] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 0.479528] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.479689] hub 3-0:1.0: USB hub found
[ 0.479706] hub 3-0:1.0: 14 ports detected
[ 0.480928] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.480931] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.481031] hub 4-0:1.0: USB hub found
[ 0.481041] hub 4-0:1.0: 6 ports detected
[ 0.481677] ahci 0000:00:1f.2: version 3.0
[ 0.481715] xhci_hcd 0000:0a:00.0: xHCI Host Controller
[ 0.481718] xhci_hcd 0000:0a:00.0: new USB bus registered, assigned bus number 5
[ 0.481816] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[ 0.481818] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 0.483062] scsi host0: ahci
[ 0.483182] scsi host1: ahci
[ 0.483289] scsi host2: ahci
[ 0.483371] scsi host3: ahci
[ 0.483452] scsi host4: ahci
[ 0.483534] scsi host5: ahci
[ 0.483561] ata1: SATA max UDMA/133 abar m2048@0xdf435000 port 0xdf435100 irq 33
[ 0.483562] ata2: DUMMY
[ 0.483562] ata3: DUMMY
[ 0.483563] ata4: DUMMY
[ 0.483563] ata5: DUMMY
[ 0.483564] ata6: DUMMY
[ 0.483724] ahci 0000:09:00.0: SSS flag set, parallel bus scan disabled
[ 0.483797] ahci 0000:09:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 0.483799] ahci 0000:09:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc
[ 0.484035] scsi host6: ahci
[ 0.484127] scsi host7: ahci
[ 0.484158] ata7: SATA max UDMA/133 abar m512@0xdf100000 port 0xdf100100 irq 34
[ 0.484162] ata8: SATA max UDMA/133 abar m512@0xdf100000 port 0xdf100180 irq 34
[ 0.542086] xhci_hcd 0000:0a:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x00000010
[ 0.542301] hub 5-0:1.0: USB hub found
[ 0.542307] hub 5-0:1.0: 2 ports detected
[ 0.542382] xhci_hcd 0000:0a:00.0: xHCI Host Controller
[ 0.542384] xhci_hcd 0000:0a:00.0: new USB bus registered, assigned bus number 6
[ 0.542532] hub 6-0:1.0: USB hub found
[ 0.542538] hub 6-0:1.0: 2 ports detected
[ 0.772291] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.785624] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 0.802310] ata7: SATA link down (SStatus 0 SControl 300)
[ 0.802311] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.803837] ata1.00: supports DRM functions and may not be fully accessible
[ 0.803974] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 0.803976] ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133
[ 0.803977] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 0.804430] ata1.00: supports DRM functions and may not be fully accessible
[ 0.804511] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 0.804614] ata1.00: configured for UDMA/133
[ 0.809060] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
[ 0.809696] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 0.809749] sd 0:0:0:0: [sda] Write Protect is off
[ 0.809751] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.809777] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.810960] sda: sda1 sda2
[ 0.811267] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.838963] usb 3-3: new high-speed USB device number 2 using xhci_hcd
[ 0.896284] hub 1-1:1.0: USB hub found
[ 0.896381] hub 1-1:1.0: 6 ports detected
[ 0.902291] usb 5-1: new low-speed USB device number 2 using xhci_hcd
[ 0.909397] hub 2-1:1.0: USB hub found
[ 0.909504] hub 2-1:1.0: 8 ports detected
[ 1.016417] usb-storage 3-3:1.0: USB Mass Storage device detected
[ 1.016503] scsi host8: usb-storage 3-3:1.0
[ 1.016547] usbcore: registered new interface driver usb-storage
[ 1.106969] usb 5-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.108911] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.111685] usbcore: registered new interface driver usbhid
[ 1.111686] usbhid: USB HID core driver
[ 1.112017] input: Yubico Yubico Yubikey II as /devices/pci0000:00/0000:00:1c.6/0000:0a:00.0/usb5/5-1/5-1:1.0/0003:1050:0010.0001/input/input2
[ 1.128975] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.138690] device-mapper: uevent: version 1.0.3
[ 1.138742] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: [email protected]
[ 1.162367] hid-generic 0003:1050:0010.0001: input,hidraw0: USB HID v1.11 Keyboard [Yubico Yubico Yubikey II] on usb-0000:0a:00.0-1/input0
[ 1.175632] usb 3-4: new high-speed USB device number 3 using xhci_hcd
[ 1.265624] usb 5-2: new full-speed USB device number 3 using xhci_hcd
[ 1.349669] usb 3-4: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
[ 1.349672] usb 3-4: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
[ 1.349948] usb-storage 3-4:1.0: USB Mass Storage device detected
[ 1.350047] scsi host9: usb-storage 3-4:1.0
[ 1.405613] tsc: Refined TSC clocksource calibration: 3199.997 MHz
[ 1.508957] usb 3-5: new high-speed USB device number 4 using xhci_hcd
[ 1.551411] input: Logitech Gaming Mouse G400 as /devices/pci0000:00/0000:00:1c.6/0000:0a:00.0/usb5/5-2/5-2:1.0/0003:046D:C245.0002/input/input3
[ 1.551471] hid-generic 0003:046D:C245.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech Gaming Mouse G400] on usb-0000:0a:00.0-2/input0
[ 1.553463] hid-generic 0003:046D:C245.0003: hiddev0,hidraw2: USB HID v1.10 Device [Logitech Gaming Mouse G400] on usb-0000:0a:00.0-2/input1
[ 1.684086] hub 3-5:1.0: USB hub found
[ 1.684362] hub 3-5:1.0: 4 ports detected
[ 1.845621] usb 3-6: new low-speed USB device number 5 using xhci_hcd
[ 2.020969] scsi 8:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 4
[ 2.021686] sd 8:0:0:0: [sdb] 30712320 512-byte logical blocks: (15.7 GB/14.6 GiB)
[ 2.021859] sd 8:0:0:0: [sdb] Write Protect is off
[ 2.021861] sd 8:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 2.022001] sd 8:0:0:0: [sdb] No Caching mode page found
[ 2.022026] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 2.025012] sdb: sdb1 sdb2
[ 2.026191] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 2.036578] usb 3-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.036581] usb 3-6: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.047021] input: daskeyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:04D9:2013.0004/input/input4
[ 2.099006] hid-generic 0003:04D9:2013.0004: input,hidraw3: USB HID v1.10 Keyboard [daskeyboard] on usb-0000:00:14.0-6/input0
[ 2.120902] input: daskeyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:04D9:2013.0005/input/input5
[ 2.172345] hid-generic 0003:04D9:2013.0005: input,hidraw4: USB HID v1.10 Device [daskeyboard] on usb-0000:00:14.0-6/input1
[ 2.332290] usb 3-11: new high-speed USB device number 6 using xhci_hcd
[ 2.352559] scsi 9:0:0:0: Direct-Access Kingston DataTraveler 2.0 PQ: 0 ANSI: 4
[ 2.352879] sd 9:0:0:0: [sdc] 31719424 512-byte logical blocks: (16.2 GB/15.1 GiB)
[ 2.353067] sd 9:0:0:0: [sdc] Write Protect is off
[ 2.353069] sd 9:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 2.353266] sd 9:0:0:0: [sdc] No Caching mode page found
[ 2.353826] sd 9:0:0:0: [sdc] Assuming drive cache: write through
[ 2.362174] sdc: sdc1
[ 2.363208] sd 9:0:0:0: [sdc] Attached SCSI removable disk
[ 2.405672] Switched to clocksource tsc
[ 2.507097] usb 3-11: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
[ 2.507099] usb 3-11: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
[ 2.507407] usb-storage 3-11:1.0: USB Mass Storage device detected
[ 2.507495] scsi host10: usb-storage 3-11:1.0
[ 2.665617] usb 3-12: new high-speed USB device number 7 using xhci_hcd
[ 2.842453] usb-storage 3-12:1.0: USB Mass Storage device detected
[ 2.842585] scsi host11: usb-storage 3-12:1.0
[ 3.847586] scsi 11:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 4
[ 3.997617] NET: Registered protocol family 38
[ 4.219285] scsi 10:0:0:0: Direct-Access General USB Flash Disk 1100 PQ: 0 ANSI: 4
[ 4.220128] sd 10:0:0:0: [sdd] 63012864 512-byte logical blocks: (32.2 GB/30.0 GiB)
[ 4.220194] sd 11:0:0:0: [sde] 30489408 512-byte logical blocks: (15.6 GB/14.5 GiB)
[ 4.220364] sd 11:0:0:0: [sde] Write Protect is off
[ 4.220366] sd 11:0:0:0: [sde] Mode Sense: 23 00 00 00
[ 4.220508] sd 11:0:0:0: [sde] No Caching mode page found
[ 4.220575] sd 10:0:0:0: [sdd] Write Protect is off
[ 4.220576] sd 10:0:0:0: [sdd] Mode Sense: 43 00 00 00
[ 4.221009] sd 10:0:0:0: [sdd] No Caching mode page found
[ 4.221010] sd 10:0:0:0: [sdd] Assuming drive cache: write through
[ 4.222407] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 4.224693] sdd: sdd4
sdd4: <openbsd: sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12 sdd13 sdd14 >
[ 4.226262] sd 10:0:0:0: [sdd] Attached SCSI removable disk
[ 5.313913] random: nonblocking pool is initialized
[ 5.416778] sd 11:0:0:0: [sde] Attached SCSI removable disk
[ 12.086160] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 12.170802] systemd-journald[68]: Received SIGTERM from PID 1 (systemd).
[ 12.275809] systemd-journald[280]: Failed to set file attributes: Inappropriate ioctl for device
[ 12.301068] EXT4-fs (dm-1): re-mounted. Opts: data=ordered
[ 12.309007] systemd-journald[280]: Received request to flush runtime journal from PID 1
[ 12.313597] systemd-journald[280]: File /var/log/journal/e414a4deae6e4c9ba897894bebffb4f6/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 12.360709] wmi: Mapper loaded
[ 12.361002] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.363359] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 12.363363] ACPI: Power Button [PWRB]
[ 12.363401] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 12.363402] ACPI: Power Button [PWRF]
[ 12.376168] thermal LNXTHERM:00: registered as thermal_zone0
[ 12.376170] ACPI: Thermal Zone [TZ00] (28 C)
[ 12.376316] thermal LNXTHERM:01: registered as thermal_zone1
[ 12.376317] ACPI: Thermal Zone [TZ01] (30 C)
[ 12.399393] pps_core: LinuxPPS API ver. 1 registered
[ 12.399395] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 12.413208] usbcore: registered new interface driver uas
[ 12.415227] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 12.417613] PTP clock support registered
[ 12.418277] mousedev: PS/2 mouse device common for all mice
[ 12.419945] cfg80211: Calling CRDA to update world regulatory domain
[ 12.421005] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 12.421007] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 12.421148] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 12.422524] [drm] Initialized drm 1.1.0 20060810
[ 12.464379] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 12.475689] intel_rapl: Found RAPL domain package
[ 12.475692] intel_rapl: Found RAPL domain core
[ 12.475694] intel_rapl: Found RAPL domain dram
[ 12.478137] ath9k 0000:07:00.0: enabling device (0000 -> 0002)
[ 12.500715] nvidia: module license 'NVIDIA' taints kernel.
[ 12.500718] Disabling lock debugging due to kernel taint
[ 12.525189] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 12.525425] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:02:00.0 on minor 0
[ 12.525430] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 349.16 Wed Apr 8 00:17:22 PDT 2015
[ 12.535588] raid6: sse2x1 10150 MB/s
[ 12.565734] ath: EEPROM regdomain: 0x21
[ 12.565736] ath: EEPROM indicates we should expect a direct regpair map
[ 12.565737] ath: Country alpha2 being used: AU
[ 12.565738] ath: Regpair used: 0x21
[ 12.569646] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 12.569872] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffc90011180000, irq=18
[ 12.570110] cfg80211: Calling CRDA to update world regulatory domain
[ 12.592245] raid6: sse2x2 13025 MB/s
[ 12.648916] raid6: sse2x4 15250 MB/s
[ 12.705580] raid6: avx2x1 20078 MB/s
[ 12.718299] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 12.718302] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:79:59:61:f6:da
[ 12.718303] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 12.718327] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 12.722320] ACPI Warning: SystemIO range 0x000000000000f000-0x000000000000f01f conflicts with OpRegion 0x000000000000f000-0x000000000000f00f (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-258)
[ 12.722325] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.722354] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 12.722515] snd_hda_intel 0000:02:00.1: Disabling MSI
[ 12.722520] snd_hda_intel 0000:02:00.1: Handle VGA-switcheroo audio client
[ 12.737216] sound hdaudioC0D0: ALC1150: SKU not ready 0x00000000
[ 12.737761] sound hdaudioC0D0: autoconfig for ALC1150: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 12.737763] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.737764] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 12.737765] sound hdaudioC0D0: mono: mono_out=0x0
[ 12.737766] sound hdaudioC0D0: dig-out=0x11/0x1e
[ 12.737767] sound hdaudioC0D0: inputs:
[ 12.737768] sound hdaudioC0D0: Front Mic=0x19
[ 12.737769] sound hdaudioC0D0: Rear Mic=0x18
[ 12.737770] sound hdaudioC0D0: Line=0x1a
[ 12.743715] asus_wmi: ASUS WMI generic driver loaded
[ 12.744542] asus_wmi: Initialization: 0x0
[ 12.744556] asus_wmi: BIOS WMI version: 0.9
[ 12.744579] asus_wmi: SFUN value: 0x0
[ 12.744768] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input11
[ 12.748196] asus_wmi: Disabling ACPI video driver
[ 12.748872] iTCO_vendor_support: vendor-support=0
[ 12.749429] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 12.749456] iTCO_wdt: Found a 9 Series TCO device (Version=2, TCOBASE=0x1860)
[ 12.749566] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.753803] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input10
[ 12.753934] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 12.753969] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 12.754006] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 12.754038] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 12.754257] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 12.754290] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 12.754322] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 12.754353] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 12.762248] raid6: avx2x2 22592 MB/s
[ 12.773292] ath9k 0000:07:00.0 wlp7s0: renamed from wlan0
[ 12.793770] e1000e 0000:00:19.0 eno1: renamed from eth0
[ 12.818917] raid6: avx2x4 26308 MB/s
[ 12.818918] raid6: using algorithm avx2x4 (26308 MB/s)
[ 12.818919] raid6: using avx2x2 recovery algorithm
[ 12.819414] xor: automatically using best checksumming function:
[ 12.852249] avx : 31086.000 MB/sec
[ 12.863432] Btrfs loaded
[ 12.863778] BTRFS: device fsid 6d6399de-8e2e-4f75-ae99-3c3366c4bdd6 devid 1 transid 11 /dev/sde
[ 12.944529] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: data=ordered
[ 13.115915] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card1/input20
[ 13.116620] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card1/input21
[ 13.116679] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card1/input22
[ 13.116721] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card1/input23
[ 13.215690] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 13.224090] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[ 13.225069] loop: module loaded
[ 13.280956] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 13.283410] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 13.290117] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.026895] wlp7s0: authenticate with 90:72:40:17:38:b6
[ 14.037301] wlp7s0: send auth to 90:72:40:17:38:b6 (try 1/3)
[ 14.039275] wlp7s0: authenticated
[ 14.042276] wlp7s0: associate with 90:72:40:17:38:b6 (try 1/3)
[ 14.046379] wlp7s0: RX AssocResp from 90:72:40:17:38:b6 (capab=0x1411 status=0 aid=9)
[ 14.046439] wlp7s0: associated
[ 14.046453] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
[ 14.046483] cfg80211: Calling CRDA to update world regulatory domain
[ 14.105634] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[ 17.420431] systemd-journald[280]: File /var/log/journal/e414a4deae6e4c9ba897894bebffb4f6/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 25.751530] NVRM: Your system is not currently configured to drive a VGA console
[ 25.751534] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 25.751536] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 25.751538] NVRM: drivers including, but not limited to, vesafb, may result in
[ 25.751539] NVRM: corruption and stability problems, and is not supported.
[ 1418.150963] usb 3-4: USB disconnect, device number 3
[ 1419.598573] usb 3-3: USB disconnect, device number 2
[ 1421.127702] usb 3-12: USB disconnect, device number 7
[ 1424.240835] usb 3-11: USB disconnect, device number 6
[ 2249.209579] snd_hda_intel 0000:00:1b.0: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 2306.065846] usb 3-5.2: new low-speed USB device number 8 using xhci_hcd
[ 2306.149018] usb 3-5.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2306.151303] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.2/3-5.2:1.0/0003:192F:0916.0006/input/input24
[ 2306.151444] hid-generic 0003:192F:0916.0006: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:14.0-5.2/input0
[ 4004.192512] usb 3-5.1: new high-speed USB device number 9 using xhci_hcd
[ 4004.273702] usb 3-5.1: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
[ 4004.273706] usb 3-5.1: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
[ 4007.847613] usb 3-5.1: USB disconnect, device number 9
[ 4008.289238] usb 3-5.1: new high-speed USB device number 11 using xhci_hcd
[ 4008.370111] usb 3-5.1: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
[ 4008.370115] usb 3-5.1: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
[ 4010.151571] usb 3-5.1: USB disconnect, device number 11
[ 4178.017583] usb 3-5.1: new high-speed USB device number 12 using xhci_hcd
[ 4178.084358] usb 3-5.1: Device not responding to setup address.
[ 4178.287423] usb 3-5.1: Device not responding to setup address.
[ 4178.490687] usb 3-5.1: device not accepting address 12, error -71
[ 4196.194409] usb 3-5.1: new high-speed USB device number 14 using xhci_hcd
[ 4196.276162] usb 3-5.1: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
[ 4196.276166] usb 3-5.1: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
[ 4197.031565] usb 3-5.1: USB disconnect, device number 14
[ 8601.322364] perf interrupt took too long (2502 > 2495), lowering kernel.perf_event_max_sample_rate to 50100
[18796.933105] PM: Syncing filesystems ... done.
[18796.942962] PM: Preparing system for mem sleep
[18797.178297] Freezing user space processes ... (elapsed 0.003 seconds) done.
[18797.181554] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[18797.182627] PM: Entering mem sleep
[18797.182645] Suspending console(s) (use no_console_suspend to debug)
[18797.182834] wlp7s0: deauthenticating from 90:72:40:17:38:b6 by local choice (Reason: 3=DEAUTH_LEAVING)
[18797.187309] queueing ieee80211 work while going to suspend
[18797.190872] cfg80211: Calling CRDA for country: AU
[18797.191036] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[18797.191074] sd 0:0:0:0: [sda] Stopping disk
[18797.214882] e1000e: EEE TX LPI TIMER: 00000011
[18797.285370] PM: suspend of devices complete after 102.586 msecs
[18797.285690] PM: late suspend of devices complete after 0.317 msecs
[18797.286087] xhci_hcd 0000:0a:00.0: System wakeup enabled by ACPI
[18797.286352] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[18797.286421] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[18797.286435] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[18797.286486] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[18797.298871] PM: noirq suspend of devices complete after 13.179 msecs
[18797.299087] ACPI: Preparing to enter system sleep state S3
[18797.338910] PM: Saving platform NVS memory
[18797.338925] Disabling non-boot CPUs ...
[18797.338959] intel_pstate CPU 1 exiting
[18797.340087] kvm: disabling virtualization on CPU1
[18797.340093] smpboot: CPU 1 is now offline
[18797.365565] intel_pstate CPU 2 exiting
[18797.366683] kvm: disabling virtualization on CPU2
[18797.366689] smpboot: CPU 2 is now offline
[18797.392219] intel_pstate CPU 3 exiting
[18797.393321] kvm: disabling virtualization on CPU3
[18797.393327] smpboot: CPU 3 is now offline
[18797.413117] ACPI: Low-level resume complete
[18797.413153] PM: Restoring platform NVS memory
[18797.413479] Enabling non-boot CPUs ...
[18797.413512] x86: Booting SMP configuration:
[18797.413512] smpboot: Booting Node 0 Processor 1 APIC 0x2
[18797.425329] kvm: enabling virtualization on CPU1
[18797.466719] CPU1 is up
[18797.466737] smpboot: Booting Node 0 Processor 2 APIC 0x4
[18797.478569] kvm: enabling virtualization on CPU2
[18797.513411] CPU2 is up
[18797.513427] smpboot: Booting Node 0 Processor 3 APIC 0x6
[18797.525272] kvm: enabling virtualization on CPU3
[18797.553454] CPU3 is up
[18797.555972] ACPI: Waking up from system sleep state S3
[18797.556581] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[18797.557228] xhci_hcd 0000:0a:00.0: System wakeup disabled by ACPI
[18797.570045] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[18797.570310] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[18797.570347] PM: noirq resume of devices complete after 13.859 msecs
[18797.570703] PM: early resume of devices complete after 0.328 msecs
[18797.570772] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[18797.574259] usb usb5: root hub lost power or was reset
[18797.574260] usb usb6: root hub lost power or was reset
[18797.574609] rtc_cmos 00:02: System wakeup disabled by ACPI
[18797.598976] sd 0:0:0:0: [sda] Starting disk
[18797.919941] ata7: SATA link down (SStatus 0 SControl 300)
[18797.919943] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[18797.919985] ata8: SATA link down (SStatus 0 SControl 300)
[18797.920163] ata1.00: supports DRM functions and may not be fully accessible
[18797.920253] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[18797.921250] ata1.00: supports DRM functions and may not be fully accessible
[18797.921309] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[18797.921397] ata1.00: configured for UDMA/133
[18798.106745] usb 5-1: reset low-speed USB device number 2 using xhci_hcd
[18798.404920] usb 5-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[18798.563422] usb 5-2: reset full-speed USB device number 3 using xhci_hcd
[18798.778018] PM: resume of devices complete after 1207.301 msecs
[18798.778320] PM: Finishing wakeup.
[18798.778322] Restarting tasks ...
[18798.778468] pci_bus 0000:05: Allocating resources
[18798.778759] done.
[18798.779188] pcieport 0000:04:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-09] add_size 200000
[18798.779193] pcieport 0000:04:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[18798.779198] pcieport 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[18798.779200] pcieport 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[18798.779202] pcieport 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[18798.779204] pcieport 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[18798.793023] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[18800.980577] wlp7s0: authenticate with 90:72:40:17:38:b6
[18800.993523] wlp7s0: send auth to 90:72:40:17:38:b6 (try 1/3)
[18800.995523] wlp7s0: authenticated
[18800.996636] wlp7s0: associate with 90:72:40:17:38:b6 (try 1/3)
[18801.000756] wlp7s0: RX AssocResp from 90:72:40:17:38:b6 (capab=0x1411 status=0 aid=10)
[18801.000856] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
[18801.000984] wlp7s0: associated
[18801.001055] cfg80211: Calling CRDA for country: AU
[18801.067283] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[38912.531009] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[38912.531027] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[82054.953062] PM: Syncing filesystems ... done.
[82054.960004] PM: Preparing system for mem sleep
[82055.239707] Freezing user space processes ... (elapsed 0.001 seconds) done.
[82055.241016] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[82055.242137] PM: Entering mem sleep
[82055.242155] Suspending console(s) (use no_console_suspend to debug)
[82055.242365] wlp7s0: deauthenticating from 90:72:40:17:38:b6 by local choice (Reason: 3=DEAUTH_LEAVING)
[82055.246879] queueing ieee80211 work while going to suspend
[82055.250564] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[82055.273768] sd 0:0:0:0: [sda] Stopping disk
[82055.273809] cfg80211: Calling CRDA for country: SE
[82055.274576] e1000e: EEE TX LPI TIMER: 00000011
[82055.355922] PM: suspend of devices complete after 113.625 msecs
[82055.356399] PM: late suspend of devices complete after 0.475 msecs
[82055.356801] xhci_hcd 0000:0a:00.0: System wakeup enabled by ACPI
[82055.357031] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[82055.357178] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[82055.357193] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[82055.357205] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[82055.369427] PM: noirq suspend of devices complete after 13.026 msecs
[82055.369643] ACPI: Preparing to enter system sleep state S3
[82055.409456] PM: Saving platform NVS memory
[82055.409472] Disabling non-boot CPUs ...
[82055.409505] intel_pstate CPU 1 exiting
[82055.410648] kvm: disabling virtualization on CPU1
[82055.410655] smpboot: CPU 1 is now offline
[82055.436155] intel_pstate CPU 2 exiting
[82055.437277] kvm: disabling virtualization on CPU2
[82055.437282] smpboot: CPU 2 is now offline
[82055.462814] intel_pstate CPU 3 exiting
[82055.463939] kvm: disabling virtualization on CPU3
[82055.463945] smpboot: CPU 3 is now offline
[82055.483791] ACPI: Low-level resume complete
[82055.483826] PM: Restoring platform NVS memory
[82055.484154] Enabling non-boot CPUs ...
[82055.484188] x86: Booting SMP configuration:
[82055.484188] smpboot: Booting Node 0 Processor 1 APIC 0x2
[82055.496003] kvm: enabling virtualization on CPU1
[82055.537332] CPU1 is up
[82055.537351] smpboot: Booting Node 0 Processor 2 APIC 0x4
[82055.549186] kvm: enabling virtualization on CPU2
[82055.590686] CPU2 is up
[82055.590703] smpboot: Booting Node 0 Processor 3 APIC 0x6
[82055.602549] kvm: enabling virtualization on CPU3
[82055.644065] CPU3 is up
[82055.646583] ACPI: Waking up from system sleep state S3
[82055.647212] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[82055.647775] xhci_hcd 0000:0a:00.0: System wakeup disabled by ACPI
[82055.660650] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[82055.660875] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[82055.660942] PM: noirq resume of devices complete after 13.843 msecs
[82055.661315] PM: early resume of devices complete after 0.344 msecs
[82055.661394] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[82055.661569] rtc_cmos 00:02: System wakeup disabled by ACPI
[82055.661651] usb usb5: root hub lost power or was reset
[82055.661652] usb usb6: root hub lost power or was reset
[82055.685882] sd 0:0:0:0: [sda] Starting disk
[82056.003867] ata7: SATA link down (SStatus 0 SControl 300)
[82056.007200] ata8: SATA link down (SStatus 0 SControl 300)
[82056.007203] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[82056.007426] ata1.00: supports DRM functions and may not be fully accessible
[82056.007517] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[82056.008991] ata1.00: supports DRM functions and may not be fully accessible
[82056.009052] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[82056.009141] ata1.00: configured for UDMA/133
[82056.100668] usb 5-2: reset full-speed USB device number 3 using xhci_hcd
[82056.557389] usb 5-1: reset low-speed USB device number 2 using xhci_hcd
[82056.855774] usb 5-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[82056.857833] PM: resume of devices complete after 1196.500 msecs
[82056.858478] PM: Finishing wakeup.
[82056.858481] Restarting tasks ...
[82056.858723] pci_bus 0000:05: Allocating resources
[82056.858823] pcieport 0000:04:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-09] add_size 200000
[82056.858831] pcieport 0000:04:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[82056.858841] pcieport 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[82056.858845] pcieport 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[82056.858852] pcieport 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[82056.858856] pcieport 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[82056.872852] done.
[82056.883825] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[82058.997617] wlp7s0: authenticate with 90:72:40:17:38:b6
[82059.010914] wlp7s0: send auth to 90:72:40:17:38:b6 (try 1/3)
[82059.012885] wlp7s0: authenticated
[82059.013887] wlp7s0: associate with 90:72:40:17:38:b6 (try 1/3)
[82059.017979] wlp7s0: RX AssocResp from 90:72:40:17:38:b6 (capab=0x1411 status=0 aid=9)
[82059.018084] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
[82059.018161] wlp7s0: associated
[82059.084254] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[113489.675820] PM: Syncing filesystems ... done.
[113489.683651] PM: Preparing system for mem sleep
[113489.944132] Freezing user space processes ... (elapsed 0.001 seconds) done.
[113489.945414] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[113489.946528] PM: Entering mem sleep
[113489.946546] Suspending console(s) (use no_console_suspend to debug)
[113489.946742] wlp7s0: deauthenticating from 90:72:40:17:38:b6 by local choice (Reason: 3=DEAUTH_LEAVING)
[113489.951268] queueing ieee80211 work while going to suspend
[113489.954846] cfg80211: Calling CRDA to update world regulatory domain
[113489.955059] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[113489.978279] sd 0:0:0:0: [sda] Stopping disk
[113489.978899] e1000e: EEE TX LPI TIMER: 00000011
[113490.074631] PM: suspend of devices complete after 127.942 msecs
[113490.075094] PM: late suspend of devices complete after 0.461 msecs
[113490.075506] xhci_hcd 0000:0a:00.0: System wakeup enabled by ACPI
[113490.075818] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[113490.075837] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[113490.075872] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[113490.075911] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[113490.088138] PM: noirq suspend of devices complete after 13.042 msecs
[113490.088354] ACPI: Preparing to enter system sleep state S3
[113490.128163] PM: Saving platform NVS memory
[113490.128180] Disabling non-boot CPUs ...
[113490.128203] intel_pstate CPU 1 exiting
[113490.129347] kvm: disabling virtualization on CPU1
[113490.129351] smpboot: CPU 1 is now offline
[113490.161520] intel_pstate CPU 2 exiting
[113490.162644] kvm: disabling virtualization on CPU2
[113490.162650] smpboot: CPU 2 is now offline
[113490.181519] intel_pstate CPU 3 exiting
[113490.182632] kvm: disabling virtualization on CPU3
[113490.182638] smpboot: CPU 3 is now offline
[113490.202427] ACPI: Low-level resume complete
[113490.202463] PM: Restoring platform NVS memory
[113490.202793] Enabling non-boot CPUs ...
[113490.202829] x86: Booting SMP configuration:
[113490.202829] smpboot: Booting Node 0 Processor 1 APIC 0x2
[113490.214744] kvm: enabling virtualization on CPU1
[113490.259334] CPU1 is up
[113490.259352] smpboot: Booting Node 0 Processor 2 APIC 0x4
[113490.271184] kvm: enabling virtualization on CPU2
[113490.312693] CPU2 is up
[113490.312710] smpboot: Booting Node 0 Processor 3 APIC 0x6
[113490.324558] kvm: enabling virtualization on CPU3
[113490.366058] CPU3 is up
[113490.368576] ACPI: Waking up from system sleep state S3
[113490.369210] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[113490.369854] xhci_hcd 0000:0a:00.0: System wakeup disabled by ACPI
[113490.382686] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[113490.382698] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[113490.382962] PM: noirq resume of devices complete after 13.874 msecs
[113490.383288] PM: early resume of devices complete after 0.297 msecs
[113490.383370] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[113490.383510] rtc_cmos 00:02: System wakeup disabled by ACPI
[113490.383713] usb usb5: root hub lost power or was reset
[113490.383714] usb usb6: root hub lost power or was reset
[113490.420538] sd 0:0:0:0: [sda] Starting disk
[113490.739213] ata8: SATA link down (SStatus 0 SControl 300)
[113490.739214] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[113490.739256] ata7: SATA link down (SStatus 0 SControl 300)
[113490.739435] ata1.00: supports DRM functions and may not be fully accessible
[113490.739526] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[113490.740531] ata1.00: supports DRM functions and may not be fully accessible
[113490.740590] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[113490.740679] ata1.00: configured for UDMA/133
[113490.919353] usb 5-1: reset low-speed USB device number 2 using xhci_hcd
[113491.217752] usb 5-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[113491.376122] usb 5-2: reset full-speed USB device number 3 using xhci_hcd
[113491.591069] PM: resume of devices complete after 1207.763 msecs
[113491.591703] PM: Finishing wakeup.
[113491.591706] Restarting tasks ...
[113491.591948] pci_bus 0000:05: Allocating resources
[113491.592048] pcieport 0000:04:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-09] add_size 200000
[113491.592056] pcieport 0000:04:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[113491.592065] pcieport 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[113491.592070] pcieport 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[113491.592076] pcieport 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[113491.592080] pcieport 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[113491.607826] done.
[113491.630221] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[113494.242854] wlp7s0: authenticate with 90:72:40:17:38:b6
[113494.252971] wlp7s0: send auth to 90:72:40:17:38:b6 (try 1/3)
[113494.254943] wlp7s0: authenticated
[113494.255892] wlp7s0: associate with 90:72:40:17:38:b6 (try 1/3)
[113494.260000] wlp7s0: RX AssocResp from 90:72:40:17:38:b6 (capab=0x1411 status=0 aid=9)
[113494.260089] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
[113494.260157] wlp7s0: associated
[113494.260179] cfg80211: Calling CRDA to update world regulatory domain
[113494.319230] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[117404.318014] PM: Syncing filesystems ... done.
[117404.328452] PM: Preparing system for mem sleep
[117404.594759] Freezing user space processes ... (elapsed 0.001 seconds) done.
[117404.596026] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[117404.597170] PM: Entering mem sleep
[117404.597189] Suspending console(s) (use no_console_suspend to debug)
[117404.597410] wlp7s0: deauthenticating from 90:72:40:17:38:b6 by local choice (Reason: 3=DEAUTH_LEAVING)
[117404.604397] queueing ieee80211 work while going to suspend
[117404.608022] cfg80211: Calling CRDA for country: SE
[117404.608348] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[117404.608470] sd 0:0:0:0: [sda] Stopping disk
[117404.631918] e1000e: EEE TX LPI TIMER: 00000011
[117404.710998] PM: suspend of devices complete after 113.662 msecs
[117404.711529] PM: late suspend of devices complete after 0.529 msecs
[117404.711937] xhci_hcd 0000:0a:00.0: System wakeup enabled by ACPI
[117404.712156] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[117404.712264] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[117404.712278] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[117404.712320] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[117404.724471] PM: noirq suspend of devices complete after 12.941 msecs
[117404.724687] ACPI: Preparing to enter system sleep state S3
[117404.764500] PM: Saving platform NVS memory
[117404.764516] Disabling non-boot CPUs ...
[117404.764549] intel_pstate CPU 1 exiting
[117404.765691] kvm: disabling virtualization on CPU1
[117404.765698] smpboot: CPU 1 is now offline
[117404.797906] intel_pstate CPU 2 exiting
[117404.799032] kvm: disabling virtualization on CPU2
[117404.799037] smpboot: CPU 2 is now offline
[117404.824515] intel_pstate CPU 3 exiting
[117404.825631] kvm: disabling virtualization on CPU3
[117404.825637] smpboot: CPU 3 is now offline
[117404.845498] ACPI: Low-level resume complete
[117404.845534] PM: Restoring platform NVS memory
[117404.845846] Enabling non-boot CPUs ...
[117404.845881] x86: Booting SMP configuration:
[117404.845881] smpboot: Booting Node 0 Processor 1 APIC 0x2
[117404.857817] kvm: enabling virtualization on CPU1
[117404.892375] CPU1 is up
[117404.892393] smpboot: Booting Node 0 Processor 2 APIC 0x4
[117404.904229] kvm: enabling virtualization on CPU2
[117404.932402] CPU2 is up
[117404.932419] smpboot: Booting Node 0 Processor 3 APIC 0x6
[117404.944265] kvm: enabling virtualization on CPU3
[117404.972435] CPU3 is up
[117404.974954] ACPI: Waking up from system sleep state S3
[117404.975586] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[117404.975921] xhci_hcd 0000:0a:00.0: System wakeup disabled by ACPI
[117404.989024] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[117404.989204] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[117404.989332] PM: noirq resume of devices complete after 13.872 msecs
[117404.989684] PM: early resume of devices complete after 0.324 msecs
[117404.989754] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[117404.990296] rtc_cmos 00:02: System wakeup disabled by ACPI
[117404.990308] usb usb5: root hub lost power or was reset
[117404.990309] usb usb6: root hub lost power or was reset
[117405.035869] sd 0:0:0:0: [sda] Starting disk
[117405.348933] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[117405.348934] ata7: SATA link down (SStatus 0 SControl 300)
[117405.349156] ata1.00: supports DRM functions and may not be fully accessible
[117405.349248] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[117405.350736] ata1.00: supports DRM functions and may not be fully accessible
[117405.350812] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[117405.350901] ata1.00: configured for UDMA/133
[117405.358905] ata8: SATA link down (SStatus 0 SControl 300)
[117405.525727] usb 5-1: reset low-speed USB device number 2 using xhci_hcd
[117405.824125] usb 5-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[117405.982404] usb 5-2: reset full-speed USB device number 3 using xhci_hcd
[117406.197020] PM: resume of devices complete after 1207.318 msecs
[117406.197652] PM: Finishing wakeup.
[117406.197656] Restarting tasks ...
[117406.197900] pci_bus 0000:05: Allocating resources
[117406.202151] pcieport 0000:04:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-09] add_size 200000
[117406.202162] pcieport 0000:04:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[117406.202173] pcieport 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[117406.202178] pcieport 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[117406.202184] pcieport 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[117406.202188] pcieport 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[117406.205568] done.
[117406.217295] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[117408.325921] wlp7s0: authenticate with 90:72:40:17:38:b6
[117408.336235] wlp7s0: send auth to 90:72:40:17:38:b6 (try 1/3)
[117408.338219] wlp7s0: authenticated
[117408.338913] wlp7s0: associate with 90:72:40:17:38:b6 (try 1/3)
[117408.343241] wlp7s0: RX AssocResp from 90:72:40:17:38:b6 (capab=0x1411 status=0 aid=9)
[117408.343329] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
[117408.343450] wlp7s0: associated
[117408.412285] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[134127.934494] usb 3-5.2: USB disconnect, device number 8
[142602.341934] PM: Syncing filesystems ... done.
[142602.351111] PM: Preparing system for mem sleep
[142602.608814] Freezing user space processes ... (elapsed 0.001 seconds) done.
[142602.610198] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[142602.611396] PM: Entering mem sleep
[142602.611414] Suspending console(s) (use no_console_suspend to debug)
[142602.611579] wlp7s0: deauthenticating from 90:72:40:17:38:b6 by local choice (Reason: 3=DEAUTH_LEAVING)
[142602.616102] queueing ieee80211 work while going to suspend
[142602.619694] cfg80211: Calling CRDA to update world regulatory domain
[142602.619868] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[142602.619955] sd 0:0:0:0: [sda] Stopping disk
[142602.643766] e1000e: EEE TX LPI TIMER: 00000011
[142602.728211] PM: suspend of devices complete after 116.676 msecs
[142602.728701] PM: late suspend of devices complete after 0.489 msecs
[142602.729105] xhci_hcd 0000:0a:00.0: System wakeup enabled by ACPI
[142602.729330] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[142602.729436] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[142602.729453] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[142602.729490] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[142602.741750] PM: noirq suspend of devices complete after 13.046 msecs
[142602.741965] ACPI: Preparing to enter system sleep state S3
[142602.781791] PM: Saving platform NVS memory
[142602.781807] Disabling non-boot CPUs ...
[142602.781830] intel_pstate CPU 1 exiting
[142602.782966] kvm: disabling virtualization on CPU1
[142602.782972] smpboot: CPU 1 is now offline
[142602.831835] intel_pstate CPU 2 exiting
[142602.832962] kvm: disabling virtualization on CPU2
[142602.832967] smpboot: CPU 2 is now offline
[142602.858489] intel_pstate CPU 3 exiting
[142602.859603] kvm: disabling virtualization on CPU3
[142602.859609] smpboot: CPU 3 is now offline
[142602.879395] ACPI: Low-level resume complete
[142602.879431] PM: Restoring platform NVS memory
[142602.879745] Enabling non-boot CPUs ...
[142602.879780] x86: Booting SMP configuration:
[142602.879780] smpboot: Booting Node 0 Processor 1 APIC 0x2
[142602.891718] kvm: enabling virtualization on CPU1
[142602.926293] CPU1 is up
[142602.926309] smpboot: Booting Node 0 Processor 2 APIC 0x4
[142602.938141] kvm: enabling virtualization on CPU2
[142602.972986] CPU2 is up
[142602.973003] smpboot: Booting Node 0 Processor 3 APIC 0x6
[142602.984849] kvm: enabling virtualization on CPU3
[142603.026357] CPU3 is up
[142603.028875] ACPI: Waking up from system sleep state S3
[142603.029496] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[142603.029831] xhci_hcd 0000:0a:00.0: System wakeup disabled by ACPI
[142603.042982] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[142603.043048] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[142603.043259] PM: noirq resume of devices complete after 13.886 msecs
[142603.043586] PM: early resume of devices complete after 0.298 msecs
[142603.043653] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[142603.043945] usb usb5: root hub lost power or was reset
[142603.043946] usb usb6: root hub lost power or was reset
[142603.059550] rtc_cmos 00:02: System wakeup disabled by ACPI
[142603.082913] sd 0:0:0:0: [sda] Starting disk
[142603.372845] ata7: SATA link down (SStatus 0 SControl 300)
[142603.372846] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[142603.372888] ata8: SATA link down (SStatus 0 SControl 300)
[142603.373069] ata1.00: supports DRM functions and may not be fully accessible
[142603.373160] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[142603.374642] ata1.00: supports DRM functions and may not be fully accessible
[142603.374703] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[142603.374790] ata1.00: configured for UDMA/133
[142603.579661] usb 5-1: reset low-speed USB device number 2 using xhci_hcd
[142603.878060] usb 5-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[142604.036324] usb 5-2: reset full-speed USB device number 3 using xhci_hcd
[142604.251054] PM: resume of devices complete after 1207.452 msecs
[142604.251452] PM: Finishing wakeup.
[142604.251454] Restarting tasks ...
[142604.251631] pci_bus 0000:05: Allocating resources
[142604.251935] done.
[142604.256729] pcieport 0000:04:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-09] add_size 200000
[142604.256735] pcieport 0000:04:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[142604.256740] pcieport 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[142604.256743] pcieport 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[142604.256745] pcieport 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[142604.256747] pcieport 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[142604.270754] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[142604.419493] usb 3-10: new low-speed USB device number 15 using xhci_hcd
[142604.598012] usb 3-10: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[142604.601195] input: Logitech USB Trackball as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/0003:046D:C408.0007/input/input40
[142604.601488] hid-generic 0003:046D:C408.0007: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:14.0-10/input0
[142606.533126] wlp7s0: authenticate with 90:72:40:17:38:b6
[142606.543375] wlp7s0: send auth to 90:72:40:17:38:b6 (try 1/3)
[142606.545339] wlp7s0: authenticated
[142606.546175] wlp7s0: associate with 90:72:40:17:38:b6 (try 1/3)
[142606.550262] wlp7s0: RX AssocResp from 90:72:40:17:38:b6 (capab=0x1411 status=0 aid=7)
[142606.550345] wlp7s0: associated
[142606.550368] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
[142606.550426] cfg80211: Calling CRDA to update world regulatory domain
[142606.625110] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[147026.512737] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[147030.096817] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[161310.509694] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[163674.263672] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[163981.675191] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[166721.159619] PM: Syncing filesystems ... done.
[166721.168456] PM: Preparing system for mem sleep
[166721.406445] Freezing user space processes ... (elapsed 0.001 seconds) done.
[166721.407623] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[166721.408707] PM: Entering mem sleep
[166721.408725] Suspending console(s) (use no_console_suspend to debug)
[166721.408907] wlp7s0: deauthenticating from 90:72:40:17:38:b6 by local choice (Reason: 3=DEAUTH_LEAVING)
[166721.413540] queueing ieee80211 work while going to suspend
[166721.417161] cfg80211: Calling CRDA to update world regulatory domain
[166721.417488] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[166721.440583] sd 0:0:0:0: [sda] Stopping disk
[166721.440973] e1000e: EEE TX LPI TIMER: 00000011
[166721.541543] PM: suspend of devices complete after 132.719 msecs
[166721.542027] PM: late suspend of devices complete after 0.473 msecs
[166721.542428] xhci_hcd 0000:0a:00.0: System wakeup enabled by ACPI
[166721.542668] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[166721.542778] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[166721.542793] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[166721.542829] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[166721.555049] PM: noirq suspend of devices complete after 13.019 msecs
[166721.555264] ACPI: Preparing to enter system sleep state S3
[166721.595078] PM: Saving platform NVS memory
[166721.595094] Disabling non-boot CPUs ...
[166721.595128] intel_pstate CPU 1 exiting
[166721.596260] kvm: disabling virtualization on CPU1
[166721.596266] smpboot: CPU 1 is now offline
[166721.628482] intel_pstate CPU 2 exiting
[166721.629609] kvm: disabling virtualization on CPU2
[166721.629615] smpboot: CPU 2 is now offline
[166721.641745] intel_pstate CPU 3 exiting
[166721.642860] kvm: disabling virtualization on CPU3
[166721.642866] smpboot: CPU 3 is now offline
[166721.662736] ACPI: Low-level resume complete
[166721.662773] PM: Restoring platform NVS memory
[166721.663105] Enabling non-boot CPUs ...
[166721.663139] x86: Booting SMP configuration:
[166721.663140] smpboot: Booting Node 0 Processor 1 APIC 0x2
[166721.674960] kvm: enabling virtualization on CPU1
[166721.709635] CPU1 is up
[166721.709652] smpboot: Booting Node 0 Processor 2 APIC 0x4
[166721.721486] kvm: enabling virtualization on CPU2
[166721.749662] CPU2 is up
[166721.749680] smpboot: Booting Node 0 Processor 3 APIC 0x6
[166721.761525] kvm: enabling virtualization on CPU3
[166721.789707] CPU3 is up
[166721.792226] ACPI: Waking up from system sleep state S3
[166721.792847] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[166721.793489] xhci_hcd 0000:0a:00.0: System wakeup disabled by ACPI
[166721.806424] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[166721.806554] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[166721.806584] PM: noirq resume of devices complete after 13.861 msecs
[166721.806935] PM: early resume of devices complete after 0.321 msecs
[166721.807005] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[166721.807282] usb usb5: root hub lost power or was reset
[166721.807283] usb usb6: root hub lost power or was reset
[166721.816172] rtc_cmos 00:02: System wakeup disabled by ACPI
[166721.839733] sd 0:0:0:0: [sda] Starting disk
[166722.156185] ata8: SATA link down (SStatus 0 SControl 300)
[166722.156186] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[166722.156409] ata1.00: supports DRM functions and may not be fully accessible
[166722.156499] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[166722.157492] ata1.00: supports DRM functions and may not be fully accessible
[166722.157550] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[166722.157638] ata1.00: configured for UDMA/133
[166722.159533] ata7: SATA link down (SStatus 0 SControl 300)
[166722.342979] usb 5-1: reset low-speed USB device number 2 using xhci_hcd
[166722.641383] usb 5-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[166722.799702] usb 5-2: reset full-speed USB device number 3 using xhci_hcd
[166723.014924] PM: resume of devices complete after 1207.972 msecs
[166723.015448] PM: Finishing wakeup.
[166723.015451] Restarting tasks ...
[166723.015661] pci_bus 0000:05: Allocating resources
[166723.015750] pcieport 0000:04:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-09] add_size 200000
[166723.015757] pcieport 0000:04:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[166723.015764] pcieport 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[166723.015768] pcieport 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[166723.015772] pcieport 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[166723.015776] pcieport 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[166723.017149] done.
[166723.032333] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[166725.776791] wlp7s0: authenticate with 90:72:40:17:38:b6
[166725.786392] wlp7s0: send auth to 90:72:40:17:38:b6 (try 1/3)
[166725.790805] wlp7s0: authenticated
[166725.792864] wlp7s0: associate with 90:72:40:17:38:b6 (try 1/3)
[166725.797009] wlp7s0: RX AssocResp from 90:72:40:17:38:b6 (capab=0x1411 status=0 aid=7)
[166725.797102] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
[166725.797171] wlp7s0: associated
[166725.797208] cfg80211: Calling CRDA to update world regulatory domain
[166725.893436] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[166811.874842] PM: Syncing filesystems ... done.
[166811.884345] PM: Preparing system for mem sleep
[166812.120252] Freezing user space processes ... (elapsed 0.001 seconds) done.
[166812.121549] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[166812.122668] PM: Entering mem sleep
[166812.122685] Suspending console(s) (use no_console_suspend to debug)
[166812.122881] wlp7s0: deauthenticating from 90:72:40:17:38:b6 by local choice (Reason: 3=DEAUTH_LEAVING)
[166812.127686] queueing ieee80211 work while going to suspend
[166812.131256] cfg80211: Calling CRDA for country: SE
[166812.131451] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[166812.154669] sd 0:0:0:0: [sda] Stopping disk
[166812.155129] e1000e: EEE TX LPI TIMER: 00000011
[166812.233533] PM: suspend of devices complete after 110.753 msecs
[166812.234000] PM: late suspend of devices complete after 0.456 msecs
[166812.234420] xhci_hcd 0000:0a:00.0: System wakeup enabled by ACPI
[166812.234618] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[166812.234705] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[166812.234787] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[166812.234802] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[166812.247263] PM: noirq suspend of devices complete after 13.261 msecs
[166812.247479] ACPI: Preparing to enter system sleep state S3
[166812.287294] PM: Saving platform NVS memory
[166812.287310] Disabling non-boot CPUs ...
[166812.287344] intel_pstate CPU 1 exiting
[166812.288477] kvm: disabling virtualization on CPU1
[166812.288484] smpboot: CPU 1 is now offline
[166812.324019] intel_pstate CPU 2 exiting
[166812.325203] kvm: disabling virtualization on CPU2
[166812.325212] smpboot: CPU 2 is now offline
[166812.344029] intel_pstate CPU 3 exiting
[166812.345176] kvm: disabling virtualization on CPU3
[166812.345184] smpboot: CPU 3 is now offline
[166812.365088] ACPI: Low-level resume complete
[166812.365124] PM: Restoring platform NVS memory
[166812.365449] Enabling non-boot CPUs ...
[166812.365483] x86: Booting SMP configuration:
[166812.365484] smpboot: Booting Node 0 Processor 1 APIC 0x2
[166812.377398] kvm: enabling virtualization on CPU1
[166812.411925] CPU1 is up
[166812.411944] smpboot: Booting Node 0 Processor 2 APIC 0x4
[166812.423776] kvm: enabling virtualization on CPU2
[166812.458616] CPU2 is up
[166812.458633] smpboot: Booting Node 0 Processor 3 APIC 0x6
[166812.470478] kvm: enabling virtualization on CPU3
[166812.498654] CPU3 is up
[166812.501171] ACPI: Waking up from system sleep state S3
[166812.501793] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[166812.502357] xhci_hcd 0000:0a:00.0: System wakeup disabled by ACPI
[166812.515272] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[166812.515480] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[166812.515531] PM: noirq resume of devices complete after 13.862 msecs
[166812.515879] PM: early resume of devices complete after 0.319 msecs
[166812.515959] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[166812.516261] usb usb5: root hub lost power or was reset
[166812.516262] usb usb6: root hub lost power or was reset
[166812.525356] rtc_cmos 00:02: System wakeup disabled by ACPI
[166812.577047] sd 0:0:0:0: [sda] Starting disk
[166812.895142] ata8: SATA link down (SStatus 0 SControl 300)
[166812.895143] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[166812.895187] ata7: SATA link down (SStatus 0 SControl 300)
[166812.895364] ata1.00: supports DRM functions and may not be fully accessible
[166812.895456] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[166812.896910] ata1.00: supports DRM functions and may not be fully accessible
[166812.896971] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[166812.897059] ata1.00: configured for UDMA/133
[166812.955284] usb 5-2: reset full-speed USB device number 3 using xhci_hcd
[166813.412074] usb 5-1: reset low-speed USB device number 2 using xhci_hcd
[166813.710359] usb 5-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[166813.712428] PM: resume of devices complete after 1196.530 msecs
[166813.712950] PM: Finishing wakeup.
[166813.712954] Restarting tasks ...
[166813.713191] pci_bus 0000:05: Allocating resources
[166813.713291] pcieport 0000:04:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-09] add_size 200000
[166813.713299] pcieport 0000:04:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[166813.713309] pcieport 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[166813.713313] pcieport 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[166813.713319] pcieport 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[166813.713323] pcieport 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[166813.721665] done.
[166813.742422] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[166815.865397] wlp7s0: authenticate with 90:72:40:17:38:b6
[166815.875468] wlp7s0: send auth to 90:72:40:17:38:b6 (try 1/3)
[166815.877419] wlp7s0: authenticated
[166815.878476] wlp7s0: associate with 90:72:40:17:38:b6 (try 1/3)
[166815.882567] wlp7s0: RX AssocResp from 90:72:40:17:38:b6 (capab=0x1411 status=0 aid=9)
[166815.882684] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
[166815.882784] wlp7s0: associated
[166815.938517] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[169305.041389] PM: Syncing filesystems ... done.
[169305.088852] PM: Preparing system for mem sleep
[169305.353904] Freezing user space processes ... (elapsed 0.001 seconds) done.
[169305.355285] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[169305.356205] PM: Entering mem sleep
[169305.356225] Suspending console(s) (use no_console_suspend to debug)
[169305.356426] wlp7s0: deauthenticating from 90:72:40:17:38:b6 by local choice (Reason: 3=DEAUTH_LEAVING)
[169305.360996] queueing ieee80211 work while going to suspend
[169305.364585] cfg80211: Calling CRDA to update world regulatory domain
[169305.364861] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[169305.365004] sd 0:0:0:0: [sda] Stopping disk
[169305.388596] e1000e: EEE TX LPI TIMER: 00000011
[169305.466171] PM: suspend of devices complete after 109.805 msecs
[169305.466646] PM: late suspend of devices complete after 0.463 msecs
[169305.467054] xhci_hcd 0000:0a:00.0: System wakeup enabled by ACPI
[169305.467309] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[169305.467386] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[169305.467400] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[169305.467448] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[169305.479683] PM: noirq suspend of devices complete after 13.036 msecs
[169305.479899] ACPI: Preparing to enter system sleep state S3
[169305.519712] PM: Saving platform NVS memory
[169305.519728] Disabling non-boot CPUs ...
[169305.519750] intel_pstate CPU 1 exiting
[169305.520892] kvm: disabling virtualization on CPU1
[169305.520897] smpboot: CPU 1 is now offline
[169305.549742] intel_pstate CPU 2 exiting
[169305.550866] kvm: disabling virtualization on CPU2
[169305.550872] smpboot: CPU 2 is now offline
[169305.576425] intel_pstate CPU 3 exiting
[169305.577543] kvm: disabling virtualization on CPU3
[169305.577549] smpboot: CPU 3 is now offline
[169305.597350] ACPI: Low-level resume complete
[169305.597386] PM: Restoring platform NVS memory
[169305.597709] Enabling non-boot CPUs ...
[169305.597744] x86: Booting SMP configuration:
[169305.597744] smpboot: Booting Node 0 Processor 1 APIC 0x2
[169305.609692] kvm: enabling virtualization on CPU1
[169305.644239] CPU1 is up
[169305.644257] smpboot: Booting Node 0 Processor 2 APIC 0x4
[169305.656089] kvm: enabling virtualization on CPU2
[169305.690924] CPU2 is up
[169305.690940] smpboot: Booting Node 0 Processor 3 APIC 0x6
[169305.702785] kvm: enabling virtualization on CPU3
[169305.744296] CPU3 is up
[169305.746813] ACPI: Waking up from system sleep state S3
[169305.747443] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[169305.747973] xhci_hcd 0000:0a:00.0: System wakeup disabled by ACPI
[169305.760855] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[169305.760865] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[169305.761170] PM: noirq resume of devices complete after 13.861 msecs
[169305.761543] PM: early resume of devices complete after 0.345 msecs
[169305.761611] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[169305.761876] usb usb5: root hub lost power or was reset
[169305.761877] usb usb6: root hub lost power or was reset
[169305.774104] rtc_cmos 00:02: System wakeup disabled by ACPI
[169305.798844] sd 0:0:0:0: [sda] Starting disk
[169306.117432] ata7: SATA link down (SStatus 0 SControl 300)
[169306.120782] ata8: SATA link down (SStatus 0 SControl 300)
[169306.120783] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[169306.121005] ata1.00: supports DRM functions and may not be fully accessible
[169306.121097] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[169306.122109] ata1.00: supports DRM functions and may not be fully accessible
[169306.122179] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[169306.122268] ata1.00: configured for UDMA/133
[169306.297585] usb 5-1: reset low-speed USB device number 2 using xhci_hcd
[169306.595783] usb 5-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[169306.754323] usb 5-2: reset full-speed USB device number 3 using xhci_hcd
[169306.969545] PM: resume of devices complete after 1207.985 msecs
[169306.970117] PM: Finishing wakeup.
[169306.970120] Restarting tasks ...
[169306.970345] pci_bus 0000:05: Allocating resources
[169306.970447] pcieport 0000:04:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-09] add_size 200000
[169306.970455] pcieport 0000:04:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[169306.970463] pcieport 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[169306.970467] pcieport 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[169306.970473] pcieport 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[169306.970476] pcieport 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[169306.979970] done.
[169306.989454] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[169309.804406] wlp7s0: authenticate with 90:72:40:17:38:b6
[169309.814633] wlp7s0: send auth to 90:72:40:17:38:b6 (try 1/3)
[169309.816604] wlp7s0: authenticated
[169309.817459] wlp7s0: associate with 90:72:40:17:38:b6 (try 1/3)
[169309.821546] wlp7s0: RX AssocResp from 90:72:40:17:38:b6 (capab=0x1411 status=0 aid=9)
[169309.821633] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
[169309.821751] wlp7s0: associated
[169309.821861] cfg80211: Calling CRDA to update world regulatory domain
[169309.829206] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[178955.924826] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[178987.061758] PM: Syncing filesystems ... done.
[178987.070931] PM: Preparing system for mem sleep
[178987.341412] Freezing user space processes ... (elapsed 0.001 seconds) done.
[178987.342881] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[178987.344052] PM: Entering mem sleep
[178987.344071] Suspending console(s) (use no_console_suspend to debug)
[178987.344291] wlp7s0: deauthenticating from 90:72:40:17:38:b6 by local choice (Reason: 3=DEAUTH_LEAVING)
[178987.348875] queueing ieee80211 work while going to suspend
[178987.352472] cfg80211: Calling CRDA to update world regulatory domain
[178987.352761] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[178987.352816] sd 0:0:0:0: [sda] Stopping disk
[178987.376584] e1000e: EEE TX LPI TIMER: 00000011
[178987.474456] PM: suspend of devices complete after 130.233 msecs
[178987.474912] PM: late suspend of devices complete after 0.445 msecs
[178987.475313] xhci_hcd 0000:0a:00.0: System wakeup enabled by ACPI
[178987.475534] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[178987.475646] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[178987.475653] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[178987.475721] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[178987.487964] PM: noirq suspend of devices complete after 13.050 msecs
[178987.488180] ACPI: Preparing to enter system sleep state S3
[178987.527991] PM: Saving platform NVS memory
[178987.528008] Disabling non-boot CPUs ...
[178987.528030] intel_pstate CPU 1 exiting
[178987.529174] kvm: disabling virtualization on CPU1
[178987.529178] smpboot: CPU 1 is now offline
[178987.554728] intel_pstate CPU 2 exiting
[178987.555850] kvm: disabling virtualization on CPU2
[178987.555857] smpboot: CPU 2 is now offline
[178987.588017] intel_pstate CPU 3 exiting
[178987.589131] kvm: disabling virtualization on CPU3
[178987.589137] smpboot: CPU 3 is now offline
[178987.608988] ACPI: Low-level resume complete
[178987.609024] PM: Restoring platform NVS memory
[178987.609335] Enabling non-boot CPUs ...
[178987.609369] x86: Booting SMP configuration:
[178987.609370] smpboot: Booting Node 0 Processor 1 APIC 0x2
[178987.621207] kvm: enabling virtualization on CPU1
[178987.649204] CPU1 is up
[178987.649222] smpboot: Booting Node 0 Processor 2 APIC 0x4
[178987.661057] kvm: enabling virtualization on CPU2
[178987.695890] CPU2 is up
[178987.695906] smpboot: Booting Node 0 Processor 3 APIC 0x6
[178987.707752] kvm: enabling virtualization on CPU3
[178987.742595] CPU3 is up
[178987.745114] ACPI: Waking up from system sleep state S3
[178987.745735] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[178987.746376] xhci_hcd 0000:0a:00.0: System wakeup disabled by ACPI
[178987.759348] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[178987.759458] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[178987.759492] PM: noirq resume of devices complete after 13.882 msecs
[178987.759847] PM: early resume of devices complete after 0.326 msecs
[178987.759916] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[178987.763226] usb usb5: root hub lost power or was reset
[178987.763236] usb usb6: root hub lost power or was reset
[178987.785681] rtc_cmos 00:02: System wakeup disabled by ACPI
[178987.809147] sd 0:0:0:0: [sda] Starting disk
[178988.105751] ata8: SATA link down (SStatus 0 SControl 300)
[178988.105753] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[178988.105796] ata7: SATA link down (SStatus 0 SControl 300)
[178988.105975] ata1.00: supports DRM functions and may not be fully accessible
[178988.106066] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[178988.107553] ata1.00: supports DRM functions and may not be fully accessible
[178988.107613] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[178988.107701] ata1.00: configured for UDMA/133
[178988.295894] usb 5-1: reset low-speed USB device number 2 using xhci_hcd
[178988.594292] usb 5-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[178988.752560] usb 5-2: reset full-speed USB device number 3 using xhci_hcd
[178988.967235] PM: resume of devices complete after 1207.373 msecs
[178988.967491] PM: Finishing wakeup.
[178988.967492] Restarting tasks ...
[178988.968315] pci_bus 0000:05: Allocating resources
[178988.968379] pcieport 0000:04:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-09] add_size 200000
[178988.968382] pcieport 0000:04:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[178988.968386] pcieport 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[178988.968388] pcieport 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[178988.968390] pcieport 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[178988.968391] pcieport 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[178988.969058] done.
[178988.988456] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[178991.092862] wlp7s0: authenticate with 90:72:40:17:38:b6
[178991.105943] wlp7s0: send auth to 90:72:40:17:38:b6 (try 1/3)
[178991.107909] wlp7s0: authenticated
[178991.109091] wlp7s0: associate with 90:72:40:17:38:b6 (try 1/3)
[178991.113199] wlp7s0: RX AssocResp from 90:72:40:17:38:b6 (capab=0x1411 status=0 aid=7)
[178991.113287] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
[178991.113357] wlp7s0: associated
[178991.113501] cfg80211: Calling CRDA to update world regulatory domain
[178991.206607] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[182902.565421] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[186677.113292] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[186680.185367] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[189000.596370] cfg80211: Calling CRDA to update world regulatory domain
[199509.413010] PM: Syncing filesystems ... done.
[199509.421577] PM: Preparing system for mem sleep
[199509.691835] Freezing user space processes ... (elapsed 0.001 seconds) done.
[199509.693165] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[199509.694255] PM: Entering mem sleep
[199509.694273] Suspending console(s) (use no_console_suspend to debug)
[199509.694492] wlp7s0: deauthenticating from 90:72:40:17:38:b6 by local choice (Reason: 3=DEAUTH_LEAVING)
[199509.700035] queueing ieee80211 work while going to suspend
[199509.703653] cfg80211: Calling CRDA for country: SE
[199509.703948] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[199509.727094] sd 0:0:0:0: [sda] Stopping disk
[199509.727441] e1000e: EEE TX LPI TIMER: 00000011
[199509.824235] PM: suspend of devices complete after 129.820 msecs
[199509.824743] PM: late suspend of devices complete after 0.506 msecs
[199509.825154] xhci_hcd 0000:0a:00.0: System wakeup enabled by ACPI
[199509.825339] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[199509.825474] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[199509.825541] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[199509.825557] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[199509.837743] PM: noirq suspend of devices complete after 12.998 msecs
[199509.837959] ACPI: Preparing to enter system sleep state S3
[199509.877767] PM: Saving platform NVS memory
[199509.877784] Disabling non-boot CPUs ...
[199509.877816] intel_pstate CPU 1 exiting
[199509.878955] kvm: disabling virtualization on CPU1
[199509.878961] smpboot: CPU 1 is now offline
[199509.907827] intel_pstate CPU 2 exiting
[199509.908988] kvm: disabling virtualization on CPU2
[199509.908995] smpboot: CPU 2 is now offline
[199509.934494] intel_pstate CPU 3 exiting
[199509.935632] kvm: disabling virtualization on CPU3
[199509.935639] smpboot: CPU 3 is now offline
[199509.955514] ACPI: Low-level resume complete
[199509.955550] PM: Restoring platform NVS memory
[199509.955863] Enabling non-boot CPUs ...
[199509.955898] x86: Booting SMP configuration:
[199509.955898] smpboot: Booting Node 0 Processor 1 APIC 0x2
[199509.967837] kvm: enabling virtualization on CPU1
[199509.995701] CPU1 is up
[199509.995720] smpboot: Booting Node 0 Processor 2 APIC 0x4
[199510.007553] kvm: enabling virtualization on CPU2
[199510.042389] CPU2 is up
[199510.042405] smpboot: Booting Node 0 Processor 3 APIC 0x6
[199510.054252] kvm: enabling virtualization on CPU3
[199510.082434] CPU3 is up
[199510.084952] ACPI: Waking up from system sleep state S3
[199510.085898] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[199510.086201] xhci_hcd 0000:0a:00.0: System wakeup disabled by ACPI
[199510.095644] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[199510.098998] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[199510.099187] PM: noirq resume of devices complete after 13.739 msecs
[199510.099534] PM: early resume of devices complete after 0.318 msecs
[199510.099615] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[199510.100125] rtc_cmos 00:02: System wakeup disabled by ACPI
[199510.100130] usb usb5: root hub lost power or was reset
[199510.100130] usb usb6: root hub lost power or was reset
[199510.124001] sd 0:0:0:0: [sda] Starting disk
[199510.442215] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[199510.442437] ata1.00: supports DRM functions and may not be fully accessible
[199510.442529] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[199510.443536] ata1.00: supports DRM functions and may not be fully accessible
[199510.443596] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[199510.443685] ata1.00: configured for UDMA/133
[199510.448895] ata7: SATA link down (SStatus 0 SControl 300)
[199510.448928] ata8: SATA link down (SStatus 0 SControl 300)
[199510.635719] usb 5-1: reset low-speed USB device number 2 using xhci_hcd
[199510.933906] usb 5-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[199511.092525] usb 5-2: reset full-speed USB device number 3 using xhci_hcd
[199511.307272] PM: resume of devices complete after 1207.722 msecs
[199511.307754] PM: Finishing wakeup.
[199511.307757] Restarting tasks ...
[199511.307958] pci_bus 0000:05: Allocating resources
[199511.308043] pcieport 0000:04:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-09] add_size 200000
[199511.308049] pcieport 0000:04:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[199511.308056] pcieport 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[199511.308059] pcieport 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[199511.308064] pcieport 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[199511.308067] pcieport 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[199511.315719] done.
[199511.328074] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[199514.049263] wlp7s0: authenticate with 90:72:40:17:38:b6
[199514.059583] wlp7s0: send auth to 90:72:40:17:38:b6 (try 1/3)
[199514.061532] wlp7s0: authenticated
[199514.062253] wlp7s0: associate with 90:72:40:17:38:b6 (try 1/3)
[199514.066343] wlp7s0: RX AssocResp from 90:72:40:17:38:b6 (capab=0x1411 status=0 aid=9)
[199514.066429] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
[199514.066588] wlp7s0: associated
[199514.131433] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[202879.484208] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[203037.593503] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[203313.567960] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[203477.616546] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[204816.018330] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[204819.704273] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[226078.031983] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[226081.308844] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[238320.137106] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[241990.748156] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[244479.228808] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[244786.947654] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[249351.940799] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[255523.216849] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[256096.414543] PM: Syncing filesystems ... done.
[256096.426090] PM: Preparing system for mem sleep
[256096.703968] Freezing user space processes ... (elapsed 0.001 seconds) done.
[256096.705478] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[256096.706646] PM: Entering mem sleep
[256096.706664] Suspending console(s) (use no_console_suspend to debug)
[256096.706861] wlp7s0: deauthenticating from 90:72:40:17:38:b6 by local choice (Reason: 3=DEAUTH_LEAVING)
[256096.714101] queueing ieee80211 work while going to suspend
[256096.717733] cfg80211: Calling CRDA to update world regulatory domain
[256096.718078] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[256096.741208] sd 0:0:0:0: [sda] Stopping disk
[256096.741967] e1000e: EEE TX LPI TIMER: 00000011
[256096.824319] PM: suspend of devices complete after 117.542 msecs
[256096.824850] PM: late suspend of devices complete after 0.529 msecs
[256096.825247] xhci_hcd 0000:0a:00.0: System wakeup enabled by ACPI
[256096.825483] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[256096.825589] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[256096.825603] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[256096.825640] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[256096.837799] PM: noirq suspend of devices complete after 12.947 msecs
[256096.838015] ACPI: Preparing to enter system sleep state S3
[256096.877827] PM: Saving platform NVS memory
[256096.877844] Disabling non-boot CPUs ...
[256096.877876] intel_pstate CPU 1 exiting
[256096.879016] kvm: disabling virtualization on CPU1
[256096.879023] smpboot: CPU 1 is now offline
[256096.914517] intel_pstate CPU 2 exiting
[256096.915650] kvm: disabling virtualization on CPU2
[256096.915656] smpboot: CPU 2 is now offline
[256096.941187] intel_pstate CPU 3 exiting
[256096.942302] kvm: disabling virtualization on CPU3
[256096.942308] smpboot: CPU 3 is now offline
[256096.962102] ACPI: Low-level resume complete
[256096.962139] PM: Restoring platform NVS memory
[256096.962456] Enabling non-boot CPUs ...
[256096.962491] x86: Booting SMP configuration:
[256096.962492] smpboot: Booting Node 0 Processor 1 APIC 0x2
[256096.974432] kvm: enabling virtualization on CPU1
[256097.015670] CPU1 is up
[256097.015688] smpboot: Booting Node 0 Processor 2 APIC 0x4
[256097.027521] kvm: enabling virtualization on CPU2
[256097.062370] CPU2 is up
[256097.062386] smpboot: Booting Node 0 Processor 3 APIC 0x6
[256097.074232] kvm: enabling virtualization on CPU3
[256097.109077] CPU3 is up
[256097.111593] ACPI: Waking up from system sleep state S3
[256097.112215] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[256097.112852] xhci_hcd 0000:0a:00.0: System wakeup disabled by ACPI
[256097.125633] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[256097.125646] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[256097.125967] PM: noirq resume of devices complete after 13.876 msecs
[256097.126309] PM: early resume of devices complete after 0.314 msecs
[256097.126506] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[256097.126551] usb usb5: root hub lost power or was reset
[256097.126552] usb usb6: root hub lost power or was reset
[256097.139091] sd 0:0:0:0: [sda] Starting disk
[256097.187264] rtc_cmos 00:02: System wakeup disabled by ACPI
[256097.448859] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[256097.449080] ata1.00: supports DRM functions and may not be fully accessible
[256097.449172] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[256097.450654] ata1.00: supports DRM functions and may not be fully accessible
[256097.450714] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[256097.450803] ata1.00: configured for UDMA/133
[256097.452217] ata8: SATA link down (SStatus 0 SControl 300)
[256097.452251] ata7: SATA link down (SStatus 0 SControl 300)
[256097.662351] usb 5-1: reset low-speed USB device number 2 using xhci_hcd
[256097.960518] usb 5-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[256098.119066] usb 5-2: reset full-speed USB device number 3 using xhci_hcd
[256098.333595] PM: resume of devices complete after 1207.273 msecs
[256098.333774] PM: Finishing wakeup.
[256098.333775] Restarting tasks ...
[256098.336330] pci_bus 0000:05: Allocating resources
[256098.336399] pcieport 0000:04:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-09] add_size 200000
[256098.336403] pcieport 0000:04:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[256098.336407] pcieport 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[256098.336409] pcieport 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[256098.336412] pcieport 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[256098.336413] pcieport 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[256098.339962] done.
[256098.351722] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[256100.635967] wlp7s0: authenticate with 90:72:40:17:38:b6
[256100.646066] wlp7s0: send auth to 90:72:40:17:38:b6 (try 1/3)
[256100.648034] wlp7s0: authenticated
[256100.648898] wlp7s0: associate with 90:72:40:17:38:b6 (try 1/3)
[256100.653007] wlp7s0: RX AssocResp from 90:72:40:17:38:b6 (capab=0x1411 status=0 aid=8)
[256100.653095] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
[256100.653172] wlp7s0: associated
[256100.653204] cfg80211: Calling CRDA to update world regulatory domain
[256100.709850] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[256115.841362] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[256116.251000] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[256119.837342] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[256120.756699] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[256136.859498] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[256136.859515] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[256137.858064] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[256138.269566] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[256156.904820] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[256159.260267] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[256192.849072] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[256193.360688] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[256200.836038] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[256201.142918] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[256216.912709] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[256217.732156] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[256254.904265] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[256255.417355] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[256289.823326] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[256290.437938] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[256533.848472] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[256534.667690] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[257846.953641] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[257847.466660] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[257850.947324] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[257851.254549] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[259614.928616] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[259618.000674] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[259985.010452] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[259987.365673] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[259994.943464] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[259995.148277] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260003.954842] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260016.959939] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260023.001688] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260023.718488] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260026.995371] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260060.480915] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260063.962613] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260067.546854] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260071.028359] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260077.991724] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260085.979100] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260096.321715] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260100.008185] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260193.706313] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260196.983645] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260202.000901] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260205.994568] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260244.395394] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260247.979515] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260316.897444] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260319.968407] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260371.067051] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260374.958333] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260413.666457] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260416.943295] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260468.656445] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260472.035684] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260519.345600] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260563.992966] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260564.300172] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260765.008667] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[260765.725469] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[261243.026972] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[261244.257548] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[261649.048009] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[261650.891255] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[261661.029090] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[261665.534803] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[261670.040865] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[261671.986134] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[261993.017626] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[261994.451205] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[262413.072204] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[262414.710607] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[262658.018684] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[262658.735498] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[262732.055368] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[262732.362805] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[262757.049474] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[262761.547531] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[262929.077812] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[262929.897033] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[262952.016379] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[262965.328292] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[262989.089288] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[262989.290413] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[263059.027027] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[263059.538475] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[263247.037257] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[263250.211770] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[263378.112342] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[263379.238898] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[263416.103641] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[263416.308442] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[263523.114138] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[263525.776625] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[264187.093560] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[264190.678682] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[264248.123328] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[264248.225755] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[265236.102077] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[265236.921342] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[265354.172145] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[265354.376926] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[265380.653025] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[265381.513640] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[265385.097642] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[265386.019270] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[265389.091329] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[265397.693179] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[265407.114796] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[265462.001874] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[265465.176346] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[265478.283857] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[265482.175150] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[265494.668293] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[265498.149965] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[265521.190502] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[265525.184176] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[265531.328316] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[265535.117218] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[265555.188110] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[265559.181800] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[265570.753292] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[265906.121260] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[265906.940537] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[266884.166868] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[266889.286909] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267304.221513] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267304.631115] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267314.154535] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267315.997816] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267319.172292] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267319.274685] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267337.195097] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267341.495982] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267345.182478] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267347.128123] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267396.178873] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267396.998105] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267403.244639] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267407.647975] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267421.165103] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267423.110727] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267443.181616] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267443.898412] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267468.167797] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267469.294216] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267479.227236] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267479.329654] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267502.165390] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267503.701438] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267526.229971] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267526.434759] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267542.204735] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267544.252838] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267566.166973] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267566.371716] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267571.184646] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267574.563924] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267596.170812] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267596.478000] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267641.227855] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267641.637488] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267645.221577] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267654.130578] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267657.202662] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267669.798138] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267681.164804] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267681.267203] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267729.191538] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267732.878060] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267739.226995] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267743.630292] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267781.211991] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[267784.079311] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[268123.236121] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[276632.464452] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[278988.437156] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[279297.590117] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
[281382.913349] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:17:38:b6
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment