Bootlog of raspbian jessie

bootlog_raspbian_jessie.txt

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0xf00
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.1.7-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.8.3 20140303 (prerelease) (crosstool-NG linaro-1.13.1+bzr2650 - Linaro GCC 2014.03) ) #817 SMP PREEMPT Sat Sep 19 15:32:00 BST 2015
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Raspberry Pi 2 Model B Rev 1.1
[    0.000000] cma: Reserved 8 MiB at 0x3a800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] [bcm2709_smp_init_cpus] enter (9420->f3003010)
[    0.000000] [bcm2709_smp_init_cpus] ncores=4
[    0.000000] PERCPU: Embedded 13 pages/cpu @b9f64000 s20608 r8192 d24448 u53248
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 239540
[    0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2709.boardrev=0xa01041 bcm2709.serial=0xf6b0477e smsc95xx.macaddr=B8:27:EB:B0:47:7E bcm2708_fb.fbswap=1 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000  dwc_otg.lpm_enable=0 console=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 939512K/966656K available (5958K kernel code, 534K rwdata, 1648K rodata, 416K init, 757K bss, 18952K reserved, 8192K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xbb800000 - 0xff000000   (1080 MB)
[    0.000000]     lowmem  : 0x80000000 - 0xbb000000   ( 944 MB)
[    0.000000]     modules : 0x7f000000 - 0x80000000   (  16 MB)
[    0.000000]       .text : 0x80008000 - 0x80775cd0   (7608 kB)
[    0.000000]       .init : 0x80776000 - 0x807de000   ( 416 kB)
[    0.000000]       .data : 0x807de000 - 0x80863af4   ( 535 kB)
[    0.000000]        .bss : 0x80866000 - 0x8092378c   ( 758 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Additional per-CPU info printed with stalls.
[    0.000000] NR_IRQS:608
[    0.000000] Architected cp15 timer(s) running at 19.20MHz (virt).
[    0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000010] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000031] Switching to timer-based delay loop, resolution 52ns
[    0.000319] Console: colour dummy device 80x30
[    0.000364] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000391] pid_max: default: 32768 minimum: 301
[    0.000727] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000750] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.002024] Initializing cgroup subsys blkio
[    0.002065] Initializing cgroup subsys memory
[    0.002099] Initializing cgroup subsys devices
[    0.002125] Initializing cgroup subsys freezer
[    0.002167] Initializing cgroup subsys net_cls
[    0.002245] CPU: Testing write buffer coherency: ok
[    0.002329] ftrace: allocating 20207 entries in 60 pages
[    0.051760] CPU0: update cpu_capacity 1024
[    0.051796] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
[    0.051814] [bcm2709_smp_prepare_cpus] enter
[    0.051952] Setting up static identity map for 0x8240 - 0x8274
[    0.111634] [bcm2709_boot_secondary] cpu:1 started (0) 18
[    0.112068] [bcm2709_secondary_init] enter cpu:1
[    0.112119] CPU1: update cpu_capacity 1024
[    0.112127] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
[    0.131602] [bcm2709_boot_secondary] cpu:2 started (0) 18
[    0.131956] [bcm2709_secondary_init] enter cpu:2
[    0.131986] CPU2: update cpu_capacity 1024
[    0.131994] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
[    0.151647] [bcm2709_boot_secondary] cpu:3 started (0) 18
[    0.151901] [bcm2709_secondary_init] enter cpu:3
[    0.151929] CPU3: update cpu_capacity 1024
[    0.151937] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
[    0.152030] Brought up 4 CPUs
[    0.152061] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.152072] CPU: All CPU(s) started in SVC mode.
[    0.153051] devtmpfs: initialized
[    0.177855] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.178183] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.179293] pinctrl core: initialized pinctrl subsystem
[    0.180099] NET: Registered protocol family 16
[    0.185839] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.187023] bcm2709.uart_clock = 3000000
[    0.192310] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.192327] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.192520] Serial: AMBA PL011 UART driver
[    0.192706] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev2
[    0.689578] console [ttyAMA0] enabled
[    0.693817] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.774186] bcm2708-dmaengine 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0xf35
[    0.782887] bcm2708-dmaengine 3f007000.dma: Initialized 7 DMA channels (+ 1 legacy)
[    0.791239] bcm2708-dmaengine 3f007000.dma: Load BCM2835 DMA engine driver
[    0.798128] bcm2708-dmaengine 3f007000.dma: dma_debug:0
[    0.804074] SCSI subsystem initialized
[    0.808059] usbcore: registered new interface driver usbfs
[    0.813661] usbcore: registered new interface driver hub
[    0.819108] usbcore: registered new device driver usb
[    0.824864] raspberrypi-firmware soc:firmware: Attached to firmware from 2015-09-23 12:12
[    0.860351] Switched to clocksource arch_sys_counter
[    0.914390] FS-Cache: Loaded
[    0.917632] CacheFiles: Loaded
[    0.932402] NET: Registered protocol family 2
[    0.938067] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.945296] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.951980] TCP: Hash tables configured (established 8192 bind 8192)
[    0.958440] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.964438] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.971163] NET: Registered protocol family 1
[    0.975946] RPC: Registered named UNIX socket transport module.
[    0.981943] RPC: Registered udp transport module.
[    0.986643] RPC: Registered tcp transport module.
[    0.991361] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.998912] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    1.008479] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    1.030724] VFS: Disk quotas dquot_6.6.0
[    1.035011] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.044576] FS-Cache: Netfs 'nfs' registered for caching
[    1.051085] NFS: Registering the id_resolver key type
[    1.056198] Key type id_resolver registered
[    1.060412] Key type id_legacy registered
[    1.067241] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.074878] io scheduler noop registered
[    1.078812] io scheduler deadline registered (default)
[    1.084343] io scheduler cfq registered
[    1.090786] BCM2708FB: allocated DMA memory fac00000
[    1.095780] BCM2708FB: allocated DMA channel 0 @ f3007000
[    1.106814] Console: switching to colour frame buffer device 82x26
[    1.116637] Serial: 8250/16550 driver, 0 ports, IRQ sharing disabled
[    1.124288] vc-cma: Videocore CMA driver
[    1.128213] vc-cma: vc_cma_base      = 0x00000000
[    1.132943] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
[    1.138333] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
[    1.143985] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[    1.167876] brd: module loaded
[    1.179802] loop: module loaded
[    1.184049] vchiq: vchiq_init_state: slot_zero = 0xbac80000, is_master = 0
[    1.192768] Loading iSCSI transport class v2.0-870.
[    1.198559] usbcore: registered new interface driver smsc95xx
[    1.204428] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.410548] Core Release: 2.80a
[    1.413694] Setting default values for core params
[    1.418516] Finished setting default values for core params
[    1.624515] Using Buffer DMA mode
[    1.627828] Periodic Transfer Interrupt Enhancement - disabled
[    1.633675] Multiprocessor Interrupt Enhancement - disabled
[    1.639239] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.643616] Dedicated Tx FIFOs mode
[    1.647421] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xbac14000 dma = 0xfac14000 len=9024
[    1.657295] FIQ FSM acceleration enabled for :
[    1.657295] Non-periodic Split Transactions
[    1.657295] Periodic Split Transactions
[    1.657295] High-Speed Isochronous Endpoints
[    1.674069] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x80401108
[    1.679988] WARN::hcd_init_fiq:413: FIQ ASM at 0x80401464 length 36
[    1.686252] WARN::hcd_init_fiq:438: MPHI regs_base at 0xbb89a000
[    1.692285] dwc_otg 3f980000.usb: DWC OTG Controller
[    1.697282] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    1.704690] dwc_otg 3f980000.usb: irq 32, io mem 0x00000000
[    1.710297] Init: Port Power? op_state=1
[    1.714242] Init: Power Port (0)
[    1.717771] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.724586] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.731826] usb usb1: Product: DWC OTG Controller
[    1.736527] usb usb1: Manufacturer: Linux 4.1.7-v7+ dwc_otg_hcd
[    1.742465] usb usb1: SerialNumber: 3f980000.usb
[    1.747964] hub 1-0:1.0: USB hub found
[    1.751834] hub 1-0:1.0: 1 port detected
[    1.756714] usbcore: registered new interface driver usb-storage
[    1.763035] mousedev: PS/2 mouse device common for all mice
[    1.769482] bcm2835-cpufreq: min=600000 max=900000
[    1.774683] sdhci: Secure Digital Host Controller Interface driver
[    1.780886] sdhci: Copyright(c) Pierre Ossman
[    1.785695] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[    1.791555] mmc-bcm2835 3f300000.mmc: DMA channels allocated
[    1.830711] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.842417] ledtrig-cpu: registered to indicate activity on CPUs
[    1.848721] hidraw: raw HID events driver (C) Jiri Kosina
[    1.855499] usbcore: registered new interface driver usbhid
[    1.862191] usbhid: USB HID core driver
[    1.867504] Initializing XFRM netlink socket
[    1.871916] NET: Registered protocol family 17
[    1.879852] Key type dns_resolver registered
[    1.884745] Registering SWP/SWPB emulation handler
[    1.890531] registered taskstats version 1
[    1.894871] vc-sm: Videocore shared memory driver
[    1.899577] [vc_sm_connected_init]: start
[    1.904404] [vc_sm_connected_init]: end - returning 0
[    1.911028] uart-pl011 3f201000.uart: no DMA platform data
[    1.916963] Waiting for root device /dev/mmcblk0p2...
[    1.922183] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.932452] mmc0: new high speed SDHC card at address 1234
[    1.938521] mmcblk0: mmc0:1234 SA08G 7.28 GiB 
[    1.944912]  mmcblk0: p1 p2
[    1.950512] Indeed it is in host mode hprt0 = 00021501
[    2.048392] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.056654] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    2.076838] devtmpfs: mounted
[    2.080597] Freeing unused kernel memory: 416K (80776000 - 807de000)
[    2.130420] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.137102] Indeed it is in host mode hprt0 = 00001101
[    2.340817] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[    2.347833] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.356392] hub 1-1:1.0: USB hub found
[    2.360413] hub 1-1:1.0: 5 ports detected
[    2.538379] random: systemd urandom read with 64 bits of entropy available
[    2.549420] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    2.563655] systemd[1]: Detected architecture 'arm'.

Welcome to Raspbian GNU/Linux 8 (jessie)!

[    2.640421] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    2.753656] NET: Registered protocol family 10
[    2.759891] systemd[1]: Inserted module 'ipv6'
[    2.764781] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    2.771702] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.779769] systemd[1]: Set hostname to <raspberrypi>.
[    2.785282] smsc95xx v1.0.4
[    2.852400] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:b0:47:7e
[    3.566459] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    3.574698] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.582409] systemd[1]: Expecting device dev-ttyAMA0.device...
         Expecting device dev-ttyAMA0.device...
[    3.610607] systemd[1]: Starting Remote File Systems (Pre).
[  OK  ] Reached target Remote File Systems (Pre).
[    3.640514] systemd[1]: Reached target Remote File Systems (Pre).
[    3.646847] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[  OK  ] Set up automount Arbitrary Executable File Formats F...utomount Point.
[    3.680539] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.690040] systemd[1]: Starting Encrypted Volumes.
[  OK  ] Reached target Encrypted Volumes.
[    3.710511] systemd[1]: Reached target Encrypted Volumes.
[    3.715999] systemd[1]: Starting Swap.
[  OK  ] Reached target Swap.
[    3.740501] systemd[1]: Reached target Swap.
[    3.744858] systemd[1]: Expecting device dev-mmcblk0p1.device...
         Expecting device dev-mmcblk0p1.device...
[    3.770516] systemd[1]: Starting Root Slice.
[  OK  ] Created slice Root Slice.
[    3.790504] systemd[1]: Created slice Root Slice.
[    3.795294] systemd[1]: Starting User and Session Slice.
[  OK  ] Created slice User and Session Slice.
[    3.820512] systemd[1]: Created slice User and Session Slice.
[    3.826343] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[    3.850528] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.857578] systemd[1]: Starting Delayed Shutdown Socket.
[  OK  ] Listening on Delayed Shutdown Socket.
[    3.880526] systemd[1]: Listening on Delayed Shutdown Socket.
[    3.886361] systemd[1]: Starting Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket (/dev/log).
[    3.910519] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.916562] systemd[1]: Starting udev Control Socket.
[  OK  ] Listening on udev Control Socket.
[    3.940513] systemd[1]: Listening on udev Control Socket.
[    3.946026] systemd[1]: Starting udev Kernel Socket.
[  OK  ] Listening on udev Kernel Socket.
[    3.970510] systemd[1]: Listening on udev Kernel Socket.
[    3.975938] systemd[1]: Starting Journal Socket.
[  OK  ] Listening on Journal Socket.
[    4.000511] systemd[1]: Listening on Journal Socket.
[    4.005648] systemd[1]: Starting System Slice.
[  OK  ] Created slice System Slice.
[    4.030511] systemd[1]: Created slice System Slice.
[    4.035561] systemd[1]: Starting File System Check on Root Device...
         Starting File System Check on Root Device...
[    4.063851] systemd[1]: Starting system-systemd\x2dfsck.slice.
[  OK  ] Created slice system-systemd\x2dfsck.slice.
[    4.090766] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    4.097486] systemd[1]: Starting system-autologin.slice.
[  OK  ][    4.103770] systemd[1]: Created slice system-autologin.slice.
 Created slice s[    4.111040] systemd[1]: Starting system-serial\x2dgetty.slice.
ystem-autologin.slice.
[    4.118677] systemd[1]: Created slice system-serial\x2dgetty.slice.
[  OK  [    4.126798] systemd[1]: Starting Increase datagram queue length...
] Created slice system-serial\x2dgetty.slice.
         [    4.137711] systemd[1]: Starting Restore / save the current clock...
Starting Increase datagram queue length...
         Starting Restore / save the current clock...
[    4.161301] systemd[1]: Mounting POSIX Message Queue File System...
         Mounting POSIX Message Queue File System...
[    4.171462] systemd[1]: Mounted Huge Pages File System.
[    4.178350] systemd[1]: Mounting Debug File System...
         Mounting Debug File System...
[    4.210219] systemd[1]: Started Set Up Additional Binary Formats.
[    4.270327] systemd[1]: Starting Load Kernel Modules...
         Starting Load Kernel Modules...
[    4.280631] systemd[1]: Starting udev Coldplug all Devices...
         Starting udev Coldplug all Devices...
[    4.293440] systemd[1]: Starting Create list of required static device nodes for the current kernel...
         Starting Create list of required static device nodes...r[    4.307965] systemd[1]: Starting Slices.
rent kernel...
[  O[    4.313485] systemd[1]: Reached target Slices.
K  ] Reached target Slices.
[  OK  [    4.328765] systemd[1]: Mounted Debug File System.
] Mounted Debug File Sys[    4.335649] systemd[1]: Mounted POSIX Message Queue File System.
tem.
[  OK  ] Mounted POSIX Me[    4.345119] systemd[1]: Started Increase datagram queue length.
ssage Queue File System.
[  OK  ] Started Increase datagram queue length.
[    4.401655] fuse init (API version 7.23)
[  OK  [    4.411137] systemd[1]: Started Restore / save the current clock.
] Started Restore / save the current clock.
[  O[    4.421971] systemd[1]: Started Create list of required static device nodes for the current kernel.
K  ] Started Create list of required static device nodes ...current kernel.
[    4.456559] systemd[1]: Time has been changed
[  OK  ] Started File System Check on Ro[    4.493553] i2c /dev entries driver
ot Device.
[    4.510704] systemd[1]: Started File System Check on Root Device.
[  OK  ] Started Load Kernel Modules.
[    4.541022] systemd[1]: Started Load Kernel Modules.
[  OK  ] Started udev Coldplug all Devices.
[    4.570594] systemd[1]: Started udev Coldplug all Devices.
[    4.750137] systemd[1]: Starting Apply Kernel Variables...
         Starting Apply Kernel Variables...
[    4.775046] systemd[1]: Mounting Configuration File System...
         Mounting Configuration File System...
         Mounting FUSE Control File System...
         Starting Create Static Device Nodes in /dev...
[  OK  ] Listening on Syslog Socket.
         Starting Journal Service...
[  OK  ] Started Journal Service.
[  OK  ] Mounted FUSE Control File System.
[  OK  ] Mounted Configuration File System.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started Create Static Device Nodes in /dev.
         Starting udev Kernel Device Manager...
[    4.903736] systemd-fsck[73]: e2fsck 1.42.12 (29-Aug-2014)
[    4.921108] systemd-fsck[73]: /dev/mmcblk0p2: clean, 129111/472352 files, 846868/1894400 blocks
[  OK  ] Started udev Kernel Device Manager.
         Starting Copy rules generated while the root was ro...
         Starting LSB: Tune IDE hard disks...
         Starting LSB: Set preliminary keymap...
[  OK  ] Started Copy rules generated while the root was ro.
[  OK  ] Started LSB: Tune IDE hard disks.
[  OK  ] Reached target Sound Card.
[  OK  ] Found device /dev/ttyAMA0.
[  OK  ] Started LSB: Set preliminary keymap.
[  OK  ] Reached target Paths.
         Starting Remount Root and Kernel File Systems...
[  OK  ] Started Remount Root and Kernel File Systems.
         Starting Load/Save Random Seed...
[  OK  ] Reached target Local File Systems (Pre).
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Found device /dev/mmcblk0p1.
         Starting File System Check on /dev/mmcblk0p1...
[    6.098912] systemd-fsck[219]: fsck.fat 3.0.27 (2014-11-12)
[    6.101976] systemd-fsck[219]: /dev/mmcblk0p1: 69 files, 2530/7161 clusters
[  OK  ] Started File System Check on /dev/mmcblk0p1.
[  OK  ] Created slice system-ifup.slice.
         Mounting /boot...
[  OK  ] Mounted /boot.
[  OK  ] Reached target Local File Systems.
         Starting Create Volatile Files and Directories...
         Starting Tell Plymouth To Write Out Runtime Data...
[  OK  ] Reached target Remote File Systems.
         Starting Trigger Flushing of Journal to Persistent Storage...
         Starting LSB: Prepare console...
         Starting LSB: Switch to ondemand cpu governor (unles... is pressed)...
         Starting LSB: Raise network interfaces....
[  OK  ] Started Create Volatile Files and Directories.
[  OK  ] Started Tell Plymouth To Write Out Runtime Data.
[  OK  ] Started Trigger Flushing of Journal to Persistent Storage.
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Started LSB: Prepare console.
         Starting LSB: Set console font and keymap...
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Started LSB: Switch to ondemand cpu governor (unless...ey is pressed).
[  OK  ] Started LSB: Set console font and keymap.
[  OK  ] Started LSB: Raise network interfaces..
         Starting ifup for eth0...
[  OK  ] Started ifup for eth0.
[  OK  ] Reached target Network.
[  OK  ] Reached target Network is Online.
[  OK  ] Reached target System Initialization.
[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Timers.
         Starting Restore Sound Card State...
[  OK  ] Reached target Basic System.
         Starting OpenBSD Secure Shell server...
[  OK  ] Started OpenBSD Secure Shell server.
         Starting Regular background program processing daemon...
[  OK  ] Started Regular background program processing daemon.
         Starting /etc/rc.local Compatibility...
         Starting Login Service...
         Starting LSB: Autogenerate and use a swap file...
         Starting LSB: IPv4 DHCP client with IPv4LL support...
         Starting LSB: triggerhappy hotkey daemon...
         Starting LSB: Start NTP daemon...
         Starting LSB: Brings up/down network automatically...
         Starting Avahi mDNS/DNS-SD Stack...
         Starting D-Bus System Message Bus...
[  OK  ] Started D-Bus System Message Bus.
[  OK  ] Started Avahi mDNS/DNS-SD Stack.
         Starting System Logging Service...
         Starting Permit User Sessions...
[  OK  ] Started Restore Sound Card State.
[  OK  ] Started /etc/rc.local Compatibility.
[  OK  ] Started LSB: Autogenerate and use a swap file.
[  OK  ] Started LSB: triggerhappy hotkey daemon.
[  OK  ] Started LSB: Start NTP daemon.
[  OK  ] Started LSB: Brings up/down network automatically.
[  OK  ] Started Permit User Sessions.
[  OK  ] Started System Logging Service.
         Starting Light Display Manager...
         Starting Wait for Plymouth Boot Screen to Quit...
         Starting Terminate Plymouth Boot Screen...
[  OK  ] Started Wait for Plymouth Boot Screen to Quit.
[  OK  ] Started Terminate Plymouth Boot Screen.
[  OK  ] Started Login Service.
         Starting Getty on tty1...
[  OK  ] Started Getty on tty1.
         Starting Serial Getty on ttyAMA0...
[  OK  ] Started Serial Getty on ttyAMA0.
[  OK  ] Reached target Login Prompts.

Raspbian GNU/Linux 8 raspberrypi ttyAMA0

raspberrypi login: