Skip to content

Instantly share code, notes, and snippets.

@tetsu-koba

tetsu-koba/00_bootlog_of_nanopi_neo

Last active February 3, 2018 04:11
Show Gist options
  • Save tetsu-koba/a0f82f294fd54a7d9c4aeba250b2f7dc to your computer and use it in GitHub Desktop.
Save tetsu-koba/a0f82f294fd54a7d9c4aeba250b2f7dc to your computer and use it in GitHub Desktop.
Download ZIP
Boot log of Nano Pi Neo
Raw
boot.log
U-Boot SPL 2017.05 (Nov 21 2017 - 17:38:12)
BOARD: Nanopi NEO id=1
DRAM: 512 MiB
Trying to boot from MMC1
U-Boot 2017.05 (Nov 21 2017 - 17:38:12 +0800) Allwinner Technology
CPU: Allwinner H3 (SUN8I 1680)
Model: NanoPi H3
DRAM: 512 MiB
MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: phy interface0
eth0: ethernet@1c30000
cputype is 0x81
Card did not respond to voltage select!
mmc_init: -95, time 22
switch to partitions #0, OK
mmc0 is current device
eMMC not exist, PC6=0
starting USB...
USB0: USB EHCI 1.00
USB1: USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
reading /boot.scr
968 bytes read in 18 ms (51.8 KiB/s)
## Executing script at 43100000
reading zImage
4507104 bytes read in 239 ms (18 MiB/s)
reading rootfs.cpio.gz
2845838 bytes read in 150 ms (18.1 MiB/s)
reading sun8i-h3-nanopi-neo.dtb
22132 bytes read in 30 ms (719.7 KiB/s)
## Flattened Device Tree blob at 48000000
Booting using the fdt blob at 0x48000000
Loading Ramdisk to 49b00000, end 4a000000 ... OK
Loading Device Tree to 49af7000, end 49aff673 ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.11.2 (root@wwd) (gcc version 4.9.3 (ctng-1.21.0-229g-FA) ) #38 SMP Tue Nov 21 16:45:21 CST 2017
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: FriendlyElec NanoPi-NEO
[ 0.000000] cma: Reserved 16 MiB at 0x5ec00000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
[ 0.000000] percpu: Embedded 16 pages/cpu @dff60000 s33152 r8192 d24192 u65536
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait fsck.repair=yes panic=10 fbcon=map:0
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 486960K/524288K available (7168K kernel code, 366K rwdata, 1584K rodata, 1024K init, 288K bss, 20944K reserved, 16384K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0800000 (8160 kB)
[ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
[ 0.000000] .data : 0xc0b00000 - 0xc0b5ba80 ( 367 kB)
[ 0.000000] .bss : 0xc0b5d000 - 0xc0ba5060 ( 289 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000018] Switching to timer-based delay loop, resolution 41ns
[ 0.000187] Console: colour dummy device 80x30
[ 0.000218] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.000232] pid_max: default: 32768 minimum: 301
[ 0.000346] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000356] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000910] CPU: Testing write buffer coherency: ok
[ 0.001296] CPU0: update cpu_capacity 1024
[ 0.001308] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001621] Setting up static identity map for 0x40100000 - 0x40100058
[ 0.002226] smp: Bringing up secondary CPUs ...
[ 0.012891] CPU1: update cpu_capacity 1024
[ 0.012897] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.023604] CPU2: update cpu_capacity 1024
[ 0.023609] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.034277] CPU3: update cpu_capacity 1024
[ 0.034282] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.034337] smp: Brought up 1 node, 4 CPUs
[ 0.034363] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[ 0.034369] CPU: All CPU(s) started in HYP mode.
[ 0.034374] CPU: Virtualization extensions available.
[ 0.035107] devtmpfs: initialized
[ 0.040108] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.040340] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.040362] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.041114] pinctrl core: initialized pinctrl subsystem
[ 0.042093] NET: Registered protocol family 16
[ 0.043467] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.044727] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.044738] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.059718] gpio-regulator gpio-regulator: could not find pctldev for node /soc/pinctrl@01f02c00/regulator_pins@0, deferring probe
[ 0.060050] SCSI subsystem initialized
[ 0.060492] usbcore: registered new interface driver usbfs
[ 0.060549] usbcore: registered new interface driver hub
[ 0.060602] usbcore: registered new device driver usb
[ 0.060797] pps_core: LinuxPPS API ver. 1 registered
[ 0.060805] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.060825] PTP clock support registered
[ 0.061055] Advanced Linux Sound Architecture Driver Initialized.
[ 0.062627] clocksource: Switched to clocksource arch_sys_counter
[ 0.062742] VFS: Disk quotas dquot_6.6.0
[ 0.062801] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.071400] NET: Registered protocol family 2
[ 0.071997] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.072054] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.072117] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.072211] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.072254] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.072475] NET: Registered protocol family 1
[ 0.072898] RPC: Registered named UNIX socket transport module.
[ 0.072910] RPC: Registered udp transport module.
[ 0.072915] RPC: Registered tcp transport module.
[ 0.072921] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.073171] Unpacking initramfs...
[ 0.223266] Initramfs unpacking failed: junk in compressed archive
[ 0.228100] Freeing initrd memory: 5120K
[ 0.230085] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.238682] NFS: Registering the id_resolver key type
[ 0.238721] Key type id_resolver registered
[ 0.238728] Key type id_legacy registered
[ 0.238743] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.238751] Installing knfsd (copyright (C) 1996 [email protected]).
[ 0.239828] fuse init (API version 7.26)
[ 0.243550] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.243566] io scheduler noop registered
[ 0.243572] io scheduler deadline registered
[ 0.243739] io scheduler cfq registered (default)
[ 0.243747] io scheduler mq-deadline registered
[ 0.249051] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[ 0.250934] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
[ 0.304941] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.307793] console [ttyS0] disabled
[ 0.327967] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 42, base_baud = 1500000) is a U6_16550A
[ 0.999430] console [ttyS0] enabled
[ 1.025866] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 43, base_baud = 1500000) is a U6_16550A
[ 1.057626] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 44, base_baud = 1500000) is a U6_16550A
[ 1.089398] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 45, base_baud = 1500000) is a U6_16550A
[ 1.100446] sun8i-de2 1000000.de-controller: bound 1c0c000.lcd-controller (ops 0xc0843758)
[ 1.262662] sun8i-de2 1000000.de-controller: bound 1ee0000.hdmi (ops 0xc0843a24)
[ 1.270054] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.276674] [drm] No driver support for vblank timestamp query.
[ 1.282648] [drm] Cannot find any crtc or sizes - going 1920x1080
[ 1.323112] Console: switching to colour frame buffer device 240x67
[ 1.355370] sun8i-de2 1000000.de-controller: fb0: frame buffer device
[ 1.362284] [drm] Initialized sun8i-de2 1.0.0 20161101 for 1000000.de-controller on minor 0
[ 1.373241] libphy: Fixed MDIO Bus: probed
[ 1.377345] CAN device driver interface
[ 1.382469] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.389020] ehci-platform: EHCI generic platform driver
[ 1.394421] ehci-platform 1c1a000.usb: EHCI Host Controller
[ 1.400017] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
[ 1.408133] ehci-platform 1c1a000.usb: irq 26, io mem 0x01c1a000
[ 1.442630] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
[ 1.449512] hub 1-0:1.0: USB hub found
[ 1.453324] hub 1-0:1.0: 1 port detected
[ 1.457741] ehci-platform 1c1b000.usb: EHCI Host Controller
[ 1.463349] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 2
[ 1.471315] ehci-platform 1c1b000.usb: irq 28, io mem 0x01c1b000
[ 1.502660] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
[ 1.509446] hub 2-0:1.0: USB hub found
[ 1.513239] hub 2-0:1.0: 1 port detected
[ 1.517604] ehci-platform 1c1c000.usb: EHCI Host Controller
[ 1.523207] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
[ 1.531157] ehci-platform 1c1c000.usb: irq 30, io mem 0x01c1c000
[ 1.564988] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[ 1.571776] hub 3-0:1.0: USB hub found
[ 1.575567] hub 3-0:1.0: 1 port detected
[ 1.579931] ehci-platform 1c1d000.usb: EHCI Host Controller
[ 1.585536] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 4
[ 1.593490] ehci-platform 1c1d000.usb: irq 32, io mem 0x01c1d000
[ 1.623350] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00
[ 1.630138] hub 4-0:1.0: USB hub found
[ 1.633941] hub 4-0:1.0: 1 port detected
[ 1.638286] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.644490] ohci-platform: OHCI generic platform driver
[ 1.649890] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
[ 1.656533] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 5
[ 1.664457] ohci-platform 1c1a400.usb: irq 27, io mem 0x01c1a400
[ 1.737394] hub 5-0:1.0: USB hub found
[ 1.741175] hub 5-0:1.0: 1 port detected
[ 1.745952] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
[ 1.752580] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 6
[ 1.760518] ohci-platform 1c1b400.usb: irq 29, io mem 0x01c1b400
[ 1.837335] hub 6-0:1.0: USB hub found
[ 1.841112] hub 6-0:1.0: 1 port detected
[ 1.845432] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[ 1.852056] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 7
[ 1.860103] ohci-platform 1c1c400.usb: irq 31, io mem 0x01c1c400
[ 1.937242] hub 7-0:1.0: USB hub found
[ 1.941021] hub 7-0:1.0: 1 port detected
[ 1.945350] ohci-platform 1c1d400.usb: Generic Platform OHCI controller
[ 1.951975] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 8
[ 1.959969] ohci-platform 1c1d400.usb: irq 33, io mem 0x01c1d400
[ 2.037268] hub 8-0:1.0: USB hub found
[ 2.041046] hub 8-0:1.0: 1 port detected
[ 2.045527] usbcore: registered new interface driver usb-storage
[ 2.051949] mousedev: PS/2 mouse device common for all mice
[ 2.058370] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0
[ 2.065171] sun6i-rtc 1f00000.rtc: RTC enabled
[ 2.069773] i2c /dev entries driver
[ 2.074966] thermal thermal_zone0: failed to read out thermal zone (-16)
[ 2.082113] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[ 2.091344] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[ 2.152758] sunxi-mmc 1c0f000.mmc: base:0xe0875000 irq:25
[ 2.159468] usbcore: registered new interface driver usbhid
[ 2.165081] usbhid: USB HID core driver
[ 2.170202] sun4i-codec 1c22c00.codec: ASoC: /soc/codec-analog@01f015c0 not registered
[ 2.178141] sun4i-codec 1c22c00.codec: Failed to register our card
[ 2.185172] Initializing XFRM netlink socket
[ 2.189477] NET: Registered protocol family 17
[ 2.193959] can: controller area network core (rev 20120528 abi 9)
[ 2.200201] NET: Registered protocol family 29
[ 2.204657] can: raw protocol (rev 20120528)
[ 2.208923] can: broadcast manager protocol (rev 20161123 t)
[ 2.214588] can: netlink gateway (rev 20130117) max_hops=1
[ 2.220459] Key type dns_resolver registered
[ 2.224934] Registering SWP/SWPB emulation handler
[ 2.236353] thermal thermal_zone0: failed to read out thermal zone (-16)
[ 2.245377] sun4i-codec 1c22c00.codec: Codec <-> 1c22c00.codec mapping ok
[ 2.253602] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01 00:00:08 UTC (8)
[ 2.261810] vcc3v0: disabling
[ 2.264814] vcc5v0: disabling
[ 2.267779] ALSA device list:
[ 2.270741] #0: H3 Audio Codec
[ 2.275592] Freeing unused kernel memory: 1024K
[ 2.282140] mmc0: host does not support reading read-only switch, assuming write-enable
[ 2.293820] mmc0: new high speed SDHC card at address aaaa
[ 2.300065] mmcblk0: mmc0:aaaa SL08G 7.40 GiB
[ 2.306163] mmcblk0: p1 p2
Loading, please wait...
starting version 225
[ 2.349517] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.354051] random: udevadm: uninitialized urandom read (16 bytes read)
[ 2.355672] random: udevadm: uninitialized urandom read (16 bytes read)
[ 2.356036] random: udevadm: uninitialized urandom read (16 bytes read)
[ 2.356426] random: udevadm: uninitialized urandom read (16 bytes read)
[ 2.356787] random: udevadm: uninitialized urandom read (16 bytes read)
[ 2.357198] random: udevadm: uninitialized urandom read (16 bytes read)
[ 2.357551] random: udevadm: uninitialized urandom read (16 bytes read)
[ 2.357914] random: udevadm: uninitialized urandom read (16 bytes read)
[ 2.358517] random: udevadm: uninitialized urandom read (16 bytes read)
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.26.2
[ 3.055393] random: fast init done
[/sbin/fsck.ext4 (1) -- /dev/mmcblk0p2] fsck.ext4 -y /dev/mmcblk0p2
e2fsck 1.42.12 (29-Aug-2014)
rootfs: clean, 56556/115200 files, 324971/460800 blocks
done.
[ 3.603677] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Begin: Resizing ext4 file system on /dev/mmcblk0p2 ... Model: SD SL08G (sd/mmc)
Disk /dev/mmcblk0: 100%
Sector size (logical/physical): 512B/51[ 3.771197] mmcblk0: p1 p2
2B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 0.32% 0.84% 0.53% primary fat16
2 0.84% 100% 99.2% primary ext4
resize2fs 1.42.12 (29-Aug-2014)
Resizing the filesystem on /dev/mmcblk0p2 to 1924096 (4k) blocks.
The filesystem on /dev/mmcblk0p2 is now 1924096 (4k) blocks long.
done.
[ 5.655989] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 6.149813] random: crng init done
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[ 6.591657] systemd[1]: System time before build time, advancing clock.
[ 6.674495] NET: Registered protocol family 10
[ 6.726848] Segment Routing with IPv6
[ 6.767898] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 6.787078] systemd[1]: Detected architecture arm.
Welcome to Ubuntu 16.04.2 LTS!
[ 6.833828] systemd[1]: Set hostname to <FriendlyELEC>.
[ 7.233276] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ 7.273225] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 7.302881] systemd[1]: Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems (Pre).
[ 7.333017] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 7.372086] systemd[1]: Reached target Remote File Systems.
[ OK ] Reached target Remote File Systems.
[ 7.403356] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
[ 7.442868] systemd[1]: Reached target Encrypted Volumes.
[ OK ] Reached target Encrypted Volumes.
[ OK ] Reached target Swap.
[ OK ] Created slice System Slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ OK ] Listening on Journal Socket.
Mounting POSIX Message Queue File System...
Mounting Debug File System...
Starting Journal Service...
Starting Load Kernel Modules...
Starting Create list of required st... nodes for the current kernel...
[ 7.746140] udc-core: couldn't find an available UDC - added [g_mass_storage] to list of pending drivers
Starting Set console keymap...
[ OK ] Listening on udev Control Socket.
Starting Remount Root and Kernel File Systems...
[ OK ] Started Forward Password Requests to Wall Directory Watch.
[ OK ] Reached target Paths.
[ OK ] Created slice User and Session Slice.
[ OK ] Reached target Slices.
[ OK ] Mounted Debug File System.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Started Journal Service.
[ OK ] Started Load Kernel Modules.
[ OK ] Started Create list of required sta...ce nodes for the current kernel.
[ OK ] Started Set console keymap.
[ OK ] Started Remount Root and Kernel File Systems.
Starting Load/Save Random Seed...
Starting udev Coldplug all Devices...
Starting Create Static Device Nodes in /dev...
Mounting Configuration File System...
Starting Apply Kernel Variables...
Mounting FUSE Control File System...
Starting Flush Journal to Persistent Storage...
[ OK ] Mounted Configuration File System.
[ OK ] Mounted FUSE Control File System.
[ OK ] Started Load/Save Random Seed.
[ OK ] Started Create Static Device Nodes in /dev.
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Flush Journal to Persistent Storage.
Starting udev Kernel Device Manager...
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Started udev Kernel Device Manager.
[ OK ] Started udev Coldplug all Devices.
[ OK ] Found device /dev/ttyS0.
[ OK ] Reached target Sound Card.
[ OK ] Found device /dev/mmcblk0p1.
Mounting /boot...
[ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[ OK ] Mounted /boot.
[ OK ] Reached target Local File Systems.
Starting Raise network interfaces...
Starting Create Volatile Files and Directories...
Starting Set console font and keymap...
[ OK ] Started Create Volatile Files and Directories.
Starting Update UTMP about System Boot/Shutdown...
Starting Network Time Synchronization...
[ OK ] Started Network Time Synchronization.
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Started Raise network interfaces.
[ OK ] Started Set console font and keymap.
[ OK ] Created slice system-getty.slice.
[ OK ] Reached target System Time Synchronized.
[ OK ] Reached target System Initialization.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Started Daily apt activities.
[ OK ] Reached target Timers.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting Restore /etc/resolv.conf i...re the ppp link was shut down...
Starting brcm_patchram_plus...
Starting Permit User Sessions...
Starting LSB: RPi-Monitor daemon...
Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
Starting Modem Manager...
Starting Save/Restore Sound Card State...
[ OK ] Started D-Bus System Message Bus.
Starting Network Manager...
Starting Login Service...
[ OK ] Started Restore /etc/resolv.conf if...fore the ppp link was shut down.
[ OK ] Started brcm_patchram_plus.
[ OK ] Started Permit User Sessions.
[ OK ] Started Save/Restore Sound Card State.
[ OK ] Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
[ OK ] Started Network Manager.
[ OK ] Started Login Service.
Starting Network Manager Script Dispatcher Service...
[ OK ] Reached target Network.
Starting OpenBSD Secure Shell server...
Starting Network Manager Wait Online...
Starting Authenticate and Authorize Users to Run Privileged Tasks...
Starting Set console scheme...
[ OK ] Started Set console scheme.
[ OK ] Started Network Manager Script Dispatcher Service.
[ OK ] Started OpenBSD Secure Shell server.
[ OK ] Started Authenticate and Authorize Users to Run Privileged Tasks.
Starting Hostname Service...
[ OK ] Started Hostname Service.
[ OK ] Started Modem Manager.
[ OK ] Started Network Manager Wait Online.
[ OK ] Reached target Network is Online.
Starting LSB: disk temperature monitoring daemon...
Starting /etc/rc.local Compatibility...
[ OK ] Started LSB: disk temperature monitoring daemon.
[ 14.577616] rc.local[491]: ctp = 0
[ OK ] Started /etc/rc.local Compatibility.
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Started Getty on tty1.
[ OK ] Reached target Login Prompts.
[ OK ] Started LSB: RPi-Monitor daemon.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
Starting Update UTMP about System Runlevel Changes...
[ OK ] Started Update UTMP about System Runlevel Changes.
Ubuntu 16.04.2 LTS NanoPi-NEO ttyS0
Default Login:
Username = pi
Password = pi
NanoPi-NEO login: pi (automatic login)
_____ _ _ _ _____ _ _____ ____
| ___| __(_) ___ _ __ __| | |_ _| ____| | | ____/ ___|
| |_ | '__| |/ _ \ '_ \ / _` | | | | | _| | | | _|| |
| _|| | | | __/ | | | (_| | | |_| | |___| |___| |__| |___
|_| |_| |_|\___|_| |_|\__,_|_|\__, |_____|_____|_____\____|
|___/
Welcome to Ubuntu 16.04.2 LTS 4.11.2
System load: 1.63 Up time: 18 sec
Memory usage: 7 % of 497Mb IP:
CPU temp: 30°C
Usage of /: 17% of 7.3G
* Documentation: http://wiki.friendlyarm.com/Ubuntu
* Forum: http://www.friendlyarm.com/Forum/
pi@NanoPi-NEO:~$
Raw
ps_ax.txt
pi@NanoPi-NEO:~$ ps ax
PID TTY STAT TIME COMMAND
1 ? Ss 0:05 /sbin/init earlyprintk
2 ? S 0:00 [kthreadd]
3 ? S 0:00 [kworker/0:0]
4 ? S< 0:00 [kworker/0:0H]
5 ? S 0:00 [kworker/u8:0]
6 ? S< 0:00 [mm_percpu_wq]
7 ? S 0:00 [ksoftirqd/0]
8 ? S 0:00 [rcu_sched]
9 ? S 0:00 [rcu_bh]
10 ? S 0:00 [migration/0]
11 ? S 0:00 [cpuhp/0]
12 ? S 0:00 [cpuhp/1]
13 ? S 0:00 [migration/1]
14 ? S 0:00 [ksoftirqd/1]
15 ? S 0:00 [kworker/1:0]
16 ? S< 0:00 [kworker/1:0H]
17 ? S 0:00 [cpuhp/2]
18 ? S 0:00 [migration/2]
19 ? S 0:00 [ksoftirqd/2]
20 ? S 0:00 [kworker/2:0]
21 ? S< 0:00 [kworker/2:0H]
22 ? S 0:00 [cpuhp/3]
23 ? S 0:00 [migration/3]
24 ? S 0:00 [ksoftirqd/3]
25 ? S 0:00 [kworker/3:0]
26 ? S< 0:00 [kworker/3:0H]
27 ? S 0:00 [kdevtmpfs]
28 ? S< 0:00 [netns]
29 ? S 0:00 [kworker/0:1]
30 ? S 0:00 [kworker/2:1]
31 ? S 0:00 [kworker/1:1]
32 ? S 0:00 [oom_reaper]
33 ? S< 0:00 [writeback]
34 ? S 0:00 [kcompactd0]
35 ? S< 0:00 [crypto]
36 ? S< 0:00 [bioset]
37 ? S< 0:00 [kblockd]
38 ? S< 0:00 [ata_sff]
39 ? S< 0:00 [cfg80211]
40 ? S< 0:00 [watchdogd]
41 ? S< 0:00 [rpciod]
42 ? S< 0:00 [xprtiod]
43 ? S 0:00 [kswapd0]
44 ? S< 0:00 [bioset]
45 ? S< 0:00 [nfsiod]
70 ? S 0:00 [kworker/3:1]
71 ? S 0:00 [spi0]
72 ? D 0:06 [irq/90-ads7846]
73 ? S 0:00 [irq/37-1c25000.]
74 ? S 0:00 [irq/25-sunxi-mm]
75 ? S 0:00 [kworker/0:2]
76 ? S< 0:00 [bioset]
77 ? S 0:01 [mmcqd/0]
78 ? S 0:00 [kworker/u8:1]
79 ? S 0:00 [kworker/2:2]
80 ? S 0:00 [kworker/u8:2]
114 ? S< 0:00 [kworker/0:1H]
144 ? S 0:00 [jbd2/mmcblk0p2-]
145 ? S< 0:00 [ext4-rsv-conver]
162 ? S< 0:00 [ipv6_addrconf]
183 ? S< 0:00 [kworker/1:1H]
194 ? S 0:00 [kworker/3:2]
195 ? Ss 0:00 /lib/systemd/systemd-journald
197 ? S 0:00 [kworker/1:2]
199 ? S 0:00 [kworker/0:3]
215 ? S< 0:00 [kworker/2:1H]
216 ? S< 0:00 [kworker/3:1H]
221 ? Ss 0:01 /lib/systemd/systemd-udevd
402 ? Ssl 0:00 /lib/systemd/systemd-timesyncd
425 ? Ss 0:00 /usr/bin/dbus-daemon --system --address=systemd: --no
428 ? Ssl 0:00 /usr/sbin/NetworkManager --no-daemon
429 ? Ss 0:00 /lib/systemd/systemd-logind
430 ? Ssl 0:00 /usr/sbin/ModemManager
450 ? Ssl 0:00 /usr/lib/policykit-1/polkitd --no-debug
457 ? Ss 0:00 /usr/sbin/sshd -D
470 ? S 0:00 /sbin/dhclient -d -q -sf /usr/lib/NetworkManager/nm-d
483 ? S 0:00 /usr/bin/lcd2usb_print CPU: {{CPU}} Mem: {{MEM}} IP:
484 ttyS0 Ss 0:00 /bin/login -f
486 tty1 Ss 0:00 /bin/login -f
487 ? SNs 0:00 /usr/bin/perl /usr/bin/rpimonitord -b /var/run/rpimon
494 ? SN 0:00 /usr/bin/perl /usr/bin/rpimonitord -b /var/run/rpimon
495 ? SN 0:01 /usr/bin/perl /usr/bin/rpimonitord -b /var/run/rpimon
496 ? S 0:00 [kworker/1:3]
497 ? S 0:00 [kworker/1:4]
499 ? S 0:00 [kworker/1:5]
669 ? Ss 0:00 /lib/systemd/systemd --user
673 ? S 0:00 (sd-pam)
683 tty1 S+ 0:00 -bash
684 ttyS0 S 0:00 -bash
703 ? S 0:00 /usr/sbin/dnsmasq --no-resolv --keep-in-foreground --
924 ttyS0 R+ 0:00 ps ax
pi@NanoPi-NEO:~$
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment