themaxhero · May 30, 2020 00:30
diff --git a/ArchInstall.sh b/ArchInstall.sh
 #!/usr/bin/env sh
 set -o errexit

 VOLUMES=($(lsblk -npo KNAME | grep -v 'loop\|sr'))
 SIZES=($(lsblk -npo KNAME,SIZE | grep -v 'loop\|sr' | awk 'BEGIN {FS=" "}; {print $2}'))
 COUNT=$(lsblk -n | grep -v 'loop\|sr' | wc -l)

 RADIOLIST=()
 for i in $(seq 0 $(expr $COUNT - 1));
 do
    RADIOLIST+=(${VOLUMES[i]} ${SIZES[i]} "OFF")
 done

 boot_disk=$(whiptail --title "Select boot disk"\
 	--radiolist "Select boot disk" 22 88 ${#VOLUMES[@]} \
 	${RADIOLIST[@]}\
 	3>&1 1>&2 2>&3)
 clear

 root_disk=$(whiptail --title "Select root disk"\
 	--radiolist "Select root disk" 22 88 ${#VOLUMES[@]} \
 	${RADIOLIST[@]}\
 	3>&1 1>&2 2>&3)
 clear

 hostname=$(whiptail --title "Settings hostname"\
 	--inputbox "Please, set a hostname: " 22 88\
 	3>&1 1>&2 2>&3)
 clear

 root_password=$(whiptail --title "Setting root password"\
 	--passwordbox "Please, set a root password: " 22 88\
 	3>&1 1>&2 2>&3)
 clear

 username=$(whiptail --title "Settings username"\
 	--inputbox "Please, set a username: " 22 88\
 	3>&1 1>&2 2>&3)
 clear

 password=$(whiptail --title "Setting ${username}'s password"\
 	--passwordbox "Please, set ${username}'s password: " 22 88\
 	3>&1 1>&2 2>&3)
 clear

 swap_part=`[ $boot_disk = $root_disk ] && echo -e 2 || echo -e 1`
 root_part=`[ $boot_disk = $root_disk ] && echo -e 3 || echo -e 2`

 tgt_boot_partition="${boot_disk}1"
 tgt_root_partition="${root_disk}${root_part}"
 swap_partition="${root_disk}${swap_part}"


 allright=$(whiptail --title "Confirm Setup"\
 	--yesno \
 	"Boot will be on ${tgt_boot_partition}\nRoot will be on ${tgt_root_partition}\nSwap will be on ${swap_partition}\n\nIs that Right?" 22 88\
 	3>&1 1>&2 2>&3)


 format_efi_broot(){
 	parted --script "${root_disk}" -- mklabel gpt \
 	mkpart ESP fat32 1Mib 513MiB \
 	set 1 boot on
 }

 format_efi_boot(){
 	parted --script "${boot_disk}" -- mklabel gpt \
 	mkpart ESP fat32 1Mib 513MiB \
 	set 1 boot on
 }

 format_efi(){
 	if test $boot_disk = $root_disk; then
 		format_efi_broot
 	else
 		format_efi_boot
 	fi
 }

 format_root(){
 	if [ $root_disk = $boot_disk ]; then
 		parted --script "${root_disk}" -- \
 			mkpart primary linux-swap 513MiB 8GiB \
 			mkpart primary ext4 8GiB 100%
 	else
 		parted --script "${root_disk}" -- mklabel gpt \
 			mkpart primary linux-swap 1Mib 8GiB \
 			mkpart primary ext4 8GiB 100%
 	fi
 }

 format_efi
 format_root

 # Create boot
 mkfs.vfat -F32 ${tgt_boot_partition}

 # Create linux Partition and Swap
 mkswap -f ${swap_partition}
 mkfs.ext4 ${tgt_root_partition}

 e2label ${tgt_root_partition} Archlinux

 # Mount
 mount ${tgt_root_partition} /mnt
 mkdir -p /mnt/boot
 mount ${tgt_boot_partition} /mnt/boot
 swapon ${swap_partition}

 rootmnt=/mnt
 bootmnt=$rootmnt/boot

 # System Bootstrap
 pacstrap -GM ${rootmnt} base base-devel
 genfstab -U ${rootmnt} | tee -a $rootmnt/etc/fstab > /dev/null

 pushd ${rootmnt}

 # Set Locale
 pushd ./etc
 rm ./localtime || echo 'There was no localtime'
 ln -s ../usr/share/zoneinfo/America/Sao_Paulo ./localtime
 popd

 echo -e 'en_US.UTF-8 UTF-8' | tee -a ./etc/locale.gen > /dev/null
 echo -e 'ja_JP.UTF-8 UTF-8' | tee -a ./etc/locale.gen > /dev/null
 echo -e 'pt_BR.UTF-8 UTF-8' | tee -a ./etc/locale.gen > /dev/null

 echo -e 'LANG=en_US.UTF-8' | cp /dev/stdin ./etc/locale.conf
 echo -e 'KEYMAP=br-abnt2' | cp /dev/stdin ./etc/vconsole.conf
 chmod 644 ./etc/locale.conf

 cat <<EOF | tee -a ./etc/xdg/plasmarc > /dev/null
 [Theme]
 name=breeze-dark
 EOF
 chmod 644 ./etc/xdg/plasmarc

 # Set hostname and hosts
 echo -e $hostname | cp /dev/stdin ./etc/hostname > /dev/null

 cat <<EOF | tee -a ./etc/hosts > /dev/null
 127.0.0.1 localhost
 ::1 localhost
 127.0.1.1 $hostname.localdomain $hostname
 EOF

 # Adding Packman Brazilian mirrors
 cat <<EOF | tee ./etc/pacman.d/mirrorlist > /dev/null
 Server = http://mirror.ufscar.br/archlinux/\$repo/os/\$arch
 Server = http://archlinux.c3sl.ufpr.br/\$repo/os/\$arch
 Server = http://www.caco.ic.unicamp.br/archlinux/\$repo/os/\$arch
 Server = https://www.caco.ic.unicamp.br/archlinux/\$repo/os/\$arch
 Server = http://linorg.usp.br/archlinux/\$repo/os/\$arch
 Server = http://pet.inf.ufsc.br/mirrors/archlinux/\$repo/os/\$arch
 Server = http://archlinux.pop-es.rnp.br/\$repo/os/\$arch
 Server = http://mirror.ufam.edu.br/archlinux/\$repo/os/\$arch
 Server = http://br.mirror.archlinux-br.org/\$repo/os/\$arch
 EOF

 # Adding Chaotic AUR
 cat <<EOF | tee -a ./etc/pacman.conf > /dev/null
 [multilib]
 Include = /etc/pacman.d/mirrorlist
 [chaotic-aur]
 Server = https://lonewolf.pedrohlc.com/\$repo/\$arch
 Server = http://chaotic.bangl.de/\$repo/\$arch
 EOF

 arch-chroot . /usr/bin/bash <<EOF
 #!/usr/bin/env sh
 locale-gen
 hwclock --systohc
 timedatectl set-ntp true
 pacman-key --init
 pacman-key --populate archlinux

 # Chaotic-AUR
 pacman-key --keyserver keys.mozilla.org -r 3056513887B78AEB
 pacman-key --lsign-key 3056513887B78AEB
 pacman -Syu --noconfirm
 groupmod -g 10 wheel
 groupmod -g 100 users
 useradd -Uu 1000 -m -g users -G wheel $username

 # Install
 pacman -S --noconfirm --needed --overwrite /boot/\\* \
 	base-devel linux-firmware linux-tkg-pds-skylake{,-headers} systemd-boot-pacman-hook \
 	multilib-devel arch-install-scripts git man{,-pages} \
 	sudo yay networkmanager pulseaudio-{alsa,bluetooth,jack} ibus-mozc \
 	\
 	efibootmgr os-prober \
 	ntfs-3g dosfstools mtools exfat-utils un{rar,zip} p7zip \
 	gvfs-mtp android-udev-git sshfs usbutils wget aria2 \
 	\
 	dash fish libpam-google-authenticator mosh powerpill rsync aria2 tmux \
 	neovim-{drop-in,plug} discord openssh htop bridge-utils alsa-utils traceroute nmap \
 	android-sdk-platform-tools ddclient dnsmasq hostapd tor inetutils \
 	networkmanager-openvpn ca-certificates-icp_br \
 	\
 	{,lib32-}mesa {,lib32-}libva intel-media-driver {,lib32-}vulkan-icd-loader \
 	{,lib32-}vulkan-radeon intel-ucode \
    \
 	bluez{,-plugins,-utils} cups sane \
 	cadence jack2 jack_capture \
 	\
 	i3 i3lock i3status grim waybar wofi-hg breeze{,-gtk,-icons} \
 	menu-calc mako wdisplays-git lxappearance \
 	wl-clipboard-x11 qt5-wayland xdg-desktop-portal{,-wlr-git} \
 	\
 	alacritty nomacs pcmanfm-qt qbittorrent telegram-desktop xarchiver \
 	firefox-wayland-hg firefox-ublock-origin \
 	wps-office{,-mui-pt-br} ttf-wps-fonts \
 	wps-office-extension-portuguese-brazilian-dictionary \
 	mpv audacious{,-plugins} gst-libav kodi-wayland spotify youtube-dl \
 	gomics-git paprefs pavucontrol print-manager system-config-printer \
 	\
 	dxvk-mingw-git {,lib32-}faudio steam steam-native-runtime \
 	wine{_gecko,-mono,-tkg-staging-fsync-git} \
 	xf86-input-libinput proton-tkg-git \
 	\
 	keybase kbfs qemu vinagre yeecli easy-rsa scrcpy-git \
 	gdb dbeaver editorconfig-core-c python-{pip,pynvim} hunspell-{en_US,pt-br} \
 	\
 	gnu-free-fonts otf{-font-awesome,-ipafont} gnome-icon-theme \
 	ttf-{dejavu,droid,fira-{code,mono,sans}} \
 	ttf-{liberation,ms-fonts,ubuntu-font-family,wps-fonts,hanazono,sazanami,baekmuk} \
    adobe-source-han-sans-jp-fonts adobe-source-han-sans-kr-fonts unityhub
 yay -S aic94xx-firmware wd719x-firmware

 groupmod -g 10 wheel
 groupmod -g 100 users
 useradd -u 1000 -m -G wheel -g users -s /bin/bash $username
 chsh root -s /bin/bash
 chsh $username -s /bin/bash
 usermod \
 	-aG audio -aG video -aG input -aG kvm \
 	$username

 echo -e '%wheel ALL=(ALL) NOPASSWD: ALL' | tee -a ./etc/sudoers
 echo -e 'Defaults env_reset,pwfeedback' | tee -a ./etc/sudoers

 systemctl enable NetworkManager
 systemctl enable sshd

 mkinitcpio -Pv

 bootctl install --path=/boot
 EOF

 arch-chroot . /usr/bin/sudo -u $username bash <<EOF
 git clone https://github.com/asdf-vm/asdf.git \$HOME/.asdf --branch v0.7.8
 echo -e '\n. \$HOME/.asdf/asdf.sh' >> \$HOME/.bashrc
 echo -e '\n. \$HOME/.asdf/completions/asdf.bash' >> \$HOME/.bashrc
 echo 'source \$HOME/.asdf/asdf.fish' >> \$HOME/.config/fish/config.fish
 mkdir -p \$HOME/.config/fish/completions && cp \$HOME/.asdf/completions/asdf.fish \$HOME/.config/fish/completions
 asdf plugin-add clojure
 asdf plugin-add crystal
 asdf plugin-add dotnet-core
 asdf plugin-add elixir
 asdf plugin-add elm
 asdf plugin-add erlang
 asdf plugin-add haskell
 asdf plugin-add lua
 asdf plugin-add luaJIT
 asdf plugin-add nodejs
 asdf plugin-add ruby
 asdf plugin-add rust
 bash ~/.asdf/plugins/nodejs/bin/import-release-team-keyring
 asdf install clojure latest
 asdf install crystal latest
 asdf install dotnet-core latest
 asdf install elixir latest
 asdf install elm latest
 asdf install erlang latest
 asdf install haskell latest
 asdf install lua latest
 asdf install luaJIT latest
 asdf install nodejs latest
 asdf install ruby latest
 asdf install rust latest
 asdf global clojure $(asdf list clojure | tail -n 1)
 asdf global crystal $(asdf list crystal | tail -n 1)
 asdf global dotnet-core $(asdf list dotnet-core | tail -n 1)
 asdf global elixir $(asdf list elixir | tail -n 1)
 asdf global elm $(asdf list elm | tail -n 1)
 asdf global erlang $(asdf list erlang | tail -n 1)
 asdf global haskell $(asdf list haskell | tail -n 1)
 asdf global lua $(asdf list lua | tail -n 1)
 asdf global luaJIT $(asdf list luaJIT | tail -n 1)
 asdf global nodejs $(asdf list nodejs | tail -n 1)
 asdf global ruby $(asdf list ruby | tail -n 1)
 asdf global rust $(asdf list rust | tail -n 1)
 EOF

 mkdir -p ./etc/systemd/system/[email protected]
 cat <<EOF | tee -a ./etc/systemd/system/[email protected]/override.conf > /dev/null
 [Service]
 ExecStart=
 ExecStart=-/usr/bin/agetty --autologin maxhero --noclear %I \$TERM
 Type=simple
 EOF

 mkdir -p ./home/$username/.config/sway
 cat <<EOF | tee ./home/$username/.config/sway/config > /dev/null
 # Default config for sway
 #
 # Copy this to ~/.config/sway/config and edit it to your liking.
 #
 # Read `man 5 sway` for a complete reference.

 ### Variables
 #
 # Logo key. Use Mod1 for Alt.
 set \$mod Mod4
 # Home row direction keys, like vim
 set \$left h
 set \$down j
 set \$up k
 set \$right l
 # Your preferred terminal emulator
 set \$term alacritty
 set \$editor vim
 # Your preferred application launcher
 # Note: pass the final command to swaymsg so that the resulting window can be opened
 # on the original workspace that the command was run on.
 # Exec mako
 exec mako
 ### Output configuration
 #
 # Default wallpaper (more resolutions are available in /usr/share/backgrounds/sway/)
 output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
 #
 # Example configuration:
 #
 #   output HDMI-A-1 resolution 1920x1080 position 1920,0
 #
 # You can get the names of your outputs by running: swaymsg -t get_outputs

 ### Idle configuration
 #
 # Example configuration:
 #
 # exec swayidle -w \
 #          timeout 300 'swaylock -f -c 000000' \
 #          timeout 600 'swaymsg "output * dpms off"' \
 #               resume 'swaymsg "output * dpms on"' \
 #          before-sleep 'swaylock -f -c 000000'
 #
 # This will lock your screen after 300 seconds of inactivity, then turn off
 # your displays after another 300 seconds, and turn your screens back on when
 # resumed. It will also lock your screen before your computer goes to sleep.

 ### Input configuration
 #
 # Example configuration:
 #
 #   input "2:14:SynPS/2_Synaptics_TouchPad" {
 #       dwt enabled
 #       tap enabled
 #       natural_scroll enabled
 #       middle_emulation enabled
 #   }
 #
 # You can get the names of your inputs by running: swaymsg -t get_inputs
 # Read `man 5 sway-input` for more information about this section.

 default_border pixel 1
 hide_edge_borders both
 for_window [app_id="firefox" title="moz-extension:.*"] floating enable
 for_window [app_id="firefox" title="Password Required"] floating enable
 for_window [app_id="firefox" title="Picture-in-Picture"] floating enable; sticky enable
 for_window [app_id="firefox" title="Firefox - Sharing Indicator"] floating enable; sticky enable

 # bindsym $mod+shift+i Swap Input mode

 exec ibus-daemon -drx --panel /usr/lib/ibus/ibus-ui-gtk3

 bindsym XF86AudioLowerVolume exec /usr/bin/pactl set-sink-volume 0 -5%
 bindsym XF86AudioRaiseVolume exec /usr/bin/pactl set-sink-volume 0 +5%
 bindsym XF86AudioMute exec /usr/bin/pactl set-sink-mute 0 toggle
 bindsym XF86WLAN exec $TERMINAL nmtui; mode "default"
 ### Key bindings
 #
 # Basics:
 #
    # Start a terminal
    bindsym \$mod+Return exec $term

    bindsym Print exec grim -g "${slurp}" - | wl-copy

    # Kill focused window
    bindsym \$mod+Shift+q kill

    # Start your launcher
    bindsym \$mod+d exec wofi --gtk-dark --show run

    # Drag floating windows by holding down $mod and left mouse button.
    # Resize them with right mouse button + $mod.
    # Despite the name, also works for non-floating windows.
    # Change normal to inverse to use left mouse button for resizing and right
    # mouse button for dragging.
    floating_modifier \$mod normal

    # Reload the configuration file
    bindsym \$mod+Shift+c reload

    # Exit sway (logs you out of your Wayland session)
    bindsym \$mod+Shift+e exec swaynag -t warning -m 'You pressed the exit shortcut. Do you really want to exit sway? This will end your Wayland session.' -b 'Yes, exit sway' 'swaymsg exit'
 #
 # Moving around:
 #
    # Move your focus around
    bindsym \$mod+$left focus left
    bindsym \$mod+$down focus down
    bindsym \$mod+$up focus up
    bindsym \$mod+$right focus right
    # Or use \$mod+[up|down|left|right]
    bindsym \$mod+Left focus left
    bindsym \$mod+Down focus down
    bindsym \$mod+Up focus up
    bindsym \$mod+Right focus right

    # Move the focused window with the same, but add Shift
    bindsym \$mod+Shift+$left move left
    bindsym \$mod+Shift+$down move down
    bindsym \$mod+Shift+$up move up
    bindsym \$mod+Shift+$right move right
    # Ditto, with arrow keys
    bindsym \$mod+Shift+Left move left
    bindsym \$mod+Shift+Down move down
    bindsym \$mod+Shift+Up move up
    bindsym \$mod+Shift+Right move right
 #
 # Workspaces:
 #
    # Switch to workspace
    bindsym \$mod+1 workspace 1
    bindsym \$mod+2 workspace 2
    bindsym \$mod+3 workspace 3
    bindsym \$mod+4 workspace 4
    bindsym \$mod+5 workspace 5
    bindsym \$mod+6 workspace 6
    bindsym \$mod+7 workspace 7
    bindsym \$mod+8 workspace 8
    bindsym \$mod+9 workspace 9
    bindsym \$mod+0 workspace 10
    # Move focused container to workspace
    bindsym \$mod+Shift+1 move container to workspace 1
    bindsym \$mod+Shift+2 move container to workspace 2
    bindsym \$mod+Shift+3 move container to workspace 3
    bindsym \$mod+Shift+4 move container to workspace 4
    bindsym \$mod+Shift+5 move container to workspace 5
    bindsym \$mod+Shift+6 move container to workspace 6
    bindsym \$mod+Shift+7 move container to workspace 7
    bindsym \$mod+Shift+8 move container to workspace 8
    bindsym \$mod+Shift+9 move container to workspace 9
    bindsym \$mod+Shift+0 move container to workspace 10
    # Note: workspaces can have any name you want, not just numbers.
    # We just use 1-10 as the default.
 #
 # Layout stuff:
 #
    # You can "split" the current object of your focus with
    # $mod+b or $mod+v, for horizontal and vertical splits
    # respectively.
    bindsym \$mod+b splith
    bindsym \$mod+v splitv

    # Switch the current container between different layout styles
    bindsym \$mod+s layout stacking
    bindsym \$mod+w layout tabbed
    bindsym \$mod+e layout toggle split

    # Make the current focus fullscreen
    bindsym \$mod+f fullscreen

    # Toggle the current focus between tiling and floating mode
    bindsym \$mod+Shift+space floating toggle

    # Swap focus between the tiling area and the floating area
    bindsym \$mod+space focus mode_toggle

    # Move focus to the parent container
    bindsym \$mod+a focus parent
 #
 # Scratchpad:
 #
    # Sway has a "scratchpad", which is a bag of holding for windows.
    # You can send windows there and get them back later.

    # Move the currently focused window to the scratchpad
    bindsym \$mod+Shift+minus move scratchpad

    # Show the next scratchpad window or hide the focused scratchpad window.
    # If there are multiple scratchpad windows, this command cycles through them.
    bindsym \$mod+minus scratchpad show
 #
 # Resizing containers:
 #
 mode "resize" {
    # left will shrink the containers width
    # right will grow the containers width
    # up will shrink the containers height
    # down will grow the containers height
    bindsym \$left resize shrink width 10px
    bindsym \$down resize grow height 10px
    bindsym \$up resize shrink height 10px
    bindsym \$right resize grow width 10px

    # Ditto, with arrow keys
    bindsym Left resize shrink width 10px
    bindsym Down resize grow height 10px
    bindsym Up resize shrink height 10px
    bindsym Right resize grow width 10px

    # Return to default mode
    bindsym Return mode "default"
    bindsym Escape mode "default"
 }
 bindsym \$mod+r mode "resize"

 #
 # Status Bar:
 #
 # Read `man 5 sway-bar` for more information about this section.

 bar {
    font pango:DejaVu Sans Mono, FontAwesome 9
 	swaybar_command waybar
 	colors {
        separator #666666
        background #222222
        statusline #dddddd
        focused_workspace #0088CC #0088CC #ffffff
        active_workspace #333333 #333333 #ffffff
        inactive_workspace #333333 #333333 #888888
        urgent_workspace #2f343a #900000 #ffffff
    }
 }
 #bar {
 #    position top
 #
    # When the status_command prints a new line to stdout, swaybar updates.
    # The default just shows the current date and time.
 #    status_command while date +'%Y-%m-%d %l:%M:%S %p'; do sleep 1; done
 #
 #    colors {
 #        statusline #ffffff
 #        background #323232
 #        inactive_workspace #32323200 #32323200 #5c5c5c
 #    }
 #}

 include /etc/sway/config.d/*
 EOF

 mkdir -p ./home/$username/.config/nvim
 cat <<EOF | tee ./home/$username/.config/nvim/init.vim > /dev/null
 call plug#begin()
 Plug 'kien/ctrlp.vim'
 Plug 'kien/rainbow_parentheses.vim'
 Plug 'rust-lang/rust.vim'
 Plug 'lokikl/vim-ctrlp-ag'
 Plug 'sillybun/vim-repl'
 Plug 'linluk/vim-websearch'
 Plug 'wakatime/wakatime'
 Plug 'bling/vim-airline'
 Plug 'reewr/vim-monokai-phoenix'
 Plug 'vim-scripts/paredit.vim'
 Plug 'mattn/gist-vim'
 Plug 'juleswang/css.vim'
 Plug 'avakhov/vim-yaml'
 Plug 'xolox/vim-misc'
 Plug 'xolox/vim-lua-ftplugin'
 Plug 'jcf/vim-latex'
 Plug 'matt-deacalion/vim-systemd-syntax'
 Plug 'vim-erlang/vim-erlang-compiler'
 Plug 'itchyny/vim-haskell-indent'
 Plug 'mechatroner/rainbow_csv'
 Plug 'mboughaba/i3config.vim'
 Plug 'tbastos/vim-lua'
 Plug 'bfrg/vim-cpp-modern'
 Plug 'othree/html5.vim'
 Plug 'groenewege/vim-less'
 Plug 'elzr/vim-json'
 Plug 'tpope/vim-markdown'
 Plug 'elixir-lang/vim-elixir'
 Plug 'moll/vim-node'
 Plug 'elmcast/elm-vim'
 Plug 'vim-scripts/c.vim'
 Plug 'terryma/vim-multiple-cursors'
 call plug#end()

 nnoremap <c-f> :CtrlPag<cr>
 vnoremap <c-f> :CtrlPagVisual<cr>
 nnoremap <leader>ca :CtrlPagLocate
 nnoremap <leader>cp :CtrlPagPrevious<cr>
 let g:ctrlp_ag_ignores = '--ignore .git
 	\ --ignore "deps/*"
 	\ --ignore "_build/*"
 	\ --ignore "node_modules/*"'
 " :REPLToggle to Open the REPL https://vimawesome.com/plugin/vim-repl-with-ourselves

 " :WebSearch hello world
 let g:web_search_engine = "google"
 let g:web_search_command = "firefox"

 " Try vim-hooks later: https://vimawesome.com/plugin/vim-hooks
 let g:airline#extensions#tabline#enabled = 1
 let g:airline#extensions#tabline#left_sep = ' '
 let g:airline#extensions#tabline#left_alt_sep = '|'
 let g:airline#extensions#tabline#formatter = 'default'

 " https://vimawesome.com/plugin/vim-lua-ftplugin

 aug i3config_ft_detection
  au!
  au BufNewFile,BufRead ~/.config/i3/config set filetype=i3config
 aug end

 au! BufRead,BufNewFile *.json set filetype=json


 augroup json_autocmd
  autocmd!
  autocmd FileType json set autoindent
  autocmd FileType json set formatoptions=tcq2l
  autocmd FileType json set textwidth=78 shiftwidth=2
  autocmd FileType json set softtabstop=2 tabstop=8
  autocmd FileType json set expandtab
  autocmd FileType json set foldmethod=syntax
 augroup END

 let g:markdown_fenced_languages = ['html', 'python', 'bash=sh']

 let g:elm_jump_to_error = 1
 let g:elm_make_show_warnings = 1
 let g:elm_format_autosave = 1

 let  g:C_UseTool_cmake   = 'yes'
 let  g:C_UseTool_doxygen = 'yes'

 let g:multi_cursor_use_default_mapping=0

 " Default mapping
 let g:multi_cursor_start_word_key      = '<C-d>'
 let g:multi_cursor_select_all_word_key = '<A-d>'
 let g:multi_cursor_start_key           = 'g<C-d>'
 let g:multi_cursor_select_all_key      = 'g<A-d>'
 let g:multi_cursor_next_key            = '<C-d>'
 let g:multi_cursor_prev_key            = '<C-S-u>'
 let g:multi_cursor_skip_key            = '<C-S-d>'
 let g:multi_cursor_quit_key            = '<Esc>'

 colorscheme monokai-phoenix
 EOF

 arch-chroot . <<EOF
 chown $username:users /home/$username/.config/sway/config
 chown $username:users /home/$username/.config/nvim/init.vim
 EOF

 # Bootloader
 cat <<EOF | tee -a ./boot/loader/entries/arch-tkg.conf > /dev/null
 title Arch Linux
 linux /vmlinuz-linux-tkg-pds-skylake
 initrd /intel-ucode.img
 initrd /initramfs-linux-tkg-pds-skylake.img
 options root=LABEL=Archlinux intel_iommu=on noibrs noibpb nopti nospectre_v2 nospectre_v1 l1tf=off nospec_store_bypass_disable no_stf_barrier mds=off mitigations=off radeon.cik_support=0 radeon.si_support=0 amdgpu.si_support=1 amdgpu.cik_support=1 amdgpu.dpm=1 amdgpu.dc=1 modprobe.blacklist=radeon module_blacklist=radeon rw
 EOF

 cat <<EOF | tee ./boot/loader/loader.conf > /dev/null
 timeout  4
 default  arch-tkg
 EOF

 # Clear
 yes | arch-chroot . pacman -Scc

 cat <<EOF | tee -a ./usr/local/bin/nowl
 #!/usr/bin/env bash
 unset CLUTTER_BACKEND
 unset ECORE_EVAS_ENGINE
 unset ELM_ENGINE
 unset SDL_VIDEODRIVER
 unset BEMENU_BACKEND
 unset GTK_USE_PORTAL

 export XKB_DEFAULT_LAYOUT='us'
 export XKB_DEFAULT_VARIANT='intl'
 export XKB_DEFAULT_OPTIONS='terminate:ctrl_alt_bksp'

 export GDK_BACKEND='x11'
 export XDG_SESSION_TYPE='x11'
 export QT_QPA_PLATFORM='xcb'
 export MOZ_ENABLE_WAYLAND=0

 exec "\$@"
 EOF

 chmod +x ./usr/local/bin/nowl

 cat <<EOF | tee -a ./usr/local/bin/startsway
 #!/usr/bin/env sh
 # Settings
 export TERMINAL='alacritty'
 export XDG_CONFIG_HOME="\$HOME/.config"
 export XDG_DATA_HOME="\$HOME/.local/share"
 export XDG_DATA_DIRS="\$HOME/.local/share/:/usr/local/share/:/usr/share/"
 export RADV_PERFTEST=aco
 export XKB_DEFAULT_LAYOUT='us'
 export XKB_DEFAULT_VARIANT='intl'
 export XKB_DEFAULT_OPTIONS='terminate:ctrl_alt_bksp'

 # Native display
 export BEMENU_BACKEND='wayland'
 export MOZ_ENABLE_WAYLAND=1
 export SAL_USE_VCLPLUGIN='gtk3'
 export GDK_BACKEND='wayland'
 export XDG_SESSION_TYPE='wayland'
 export QT_QPA_PLATFORM='wayland'
 export QT_WAYLAND_FORCE_DPI='physical'
 export QT_WAYLAND_DISABLE_WINDOWDECORATION=1
 export CLUTTER_BACKEND='wayland'
 export SDL_VIDEODRIVER='wayland'
 export ECORE_EVAS_ENGINE='wayland_egl'
 export ELM_ENGINE='wayland_egl'
 #export GTK_USE_PORTAL=1

 # Bug Fixing
 export _JAVA_AWT_WM_NONREPARENTING=1

 # Qt appearance
 #requires plasma-integration (could be qt5ct instead)
 export QT_QPA_PLATFORMTHEME='kde'
 export QT_PLATFORMTHEME='kde'
 export QT_PLATFORM_PLUGIN='kde'
 export QT_IM_MODULE=ibus
 export GTK_IM_MODULE=ibus
 export XMODIFIERS=@im=ibus

 # DE
 export XDG_CURRENT_DESKTOP='sway'
 exec sway
 EOF

 chmod +x ./usr/local/bin/startsway

 arch-chroot . <<EOF
 echo -e "$root_password\n$root_password" | passwd root
 echo -e "$password\n$password" | passwd $username
 EOF

 popd

 umount -R /mnt
 reboot