Three.js Geometry

http://threejs.org/docs/58/#Reference/Extras.Geometries/CircleGeometry 

CircleGeometry(radius, segments, thetaStart, thetaLength)
	radius — Radius of the circle, default = 50.
	segments — Number of segments (triangles), minimum = 3, default = 8.
	thetaStart — Start angle for first segment, default = 0 (three o'clock position).
	thetaLength — Circumference of the circle, default = 2*Pi (360°).

CubeGeometry(width, height, depth, widthSegments, heightSegments, depthSegments)
	width — Width of the sides on the X axis.
	height — Height of the sides on the Y axis.
	depth — Depth of the sides on the Z axis.
	widthSegments — Number of segmented faces along the width of the sides.
	heightSegments — Number of segmented faces along the height of the sides.
	depthSegments — Number of segmented faces along the depth of the sides.

CylinderGeometry(radiusTop, radiusBottom, height, radiusSegments, heightSegments, openEnded)
	radiusTop — Radius of the cylinder at the top.
	radiusBottom — Radius of the cylinder at the bottom.
	height — Height of the cylinder.
	radiusSegments — Number of segmented faces around the circumference of the cylinder.
	heightSegments — Number of rows of faces along the height of the cylinder.
	openEnded - A Boolean indicating whether or not to cap the ends of the cylinder.

IcosahedronGeometry( radius, detail )

OctahedronGeometry( radius, detail )

PlaneGeometry( width, height, widthSegments, heightSegments )

SphereGeometry( radius, segmentsWidth, segmentsHeight, phiStart, phiLength, thetaStart, thetaLength )
	radius — sphere radius. Default is 50.
	segmentsWidth — number of horizontal segments. Minimum value is 3, and the default is 8.
	segmentsHeight — number of vertical segments. Minimum value is 2, and the default is 6.
	phiStart — specify horizontal starting angle. Default is 0.
	phiLength — specify horizontal sweep angle size. Default is Math.PI * 2.
	thetaStart — specify vertical starting angle. Default is 0.
	thetaLength — specify vertical sweep angle size. Default is Math.PI.

TorusGeometry( radius, tube, radialSegments, tubularSegments, arc )

TorusKnotGeometry( radius, tube, radialSegments, tubularSegments, arc )