Teamspeak 3 Channel Join Monitor - Lua script

init.lua

-- written by https://github.com/thorwe aka philosound in the teamspeak forums

-- Installation:
-- Go to your Teamspeak program folder -> plugins -> lua_plugin
-- Create a new folder, rename it to "notifier"
-- Put this init.lua file in the "notifier" folder
-- Adjust user config below to your needs
-- Start Teamspeak, make sure the lua plugin is enabled in options->plugins
-- Enter the plugin settings, enable the notifier script

require("ts3init")
require("ts3defs")
require("ts3errors")

-- user config
local ChannelsToNotify = {
	["Jianji"] = {
		["Eingangshalle"] = {
			--["_anyServerGroup"] = "sound/azuno.wav",
			["Guest"] = "sound/azuno.wav"
		}
	},
	["Homebase der KEYBOARD SM4SHERs"] = {
		["Allgemeiner Support - Wartebereich"] = {
			["_anyServerGroup"] = "sound/beep.mp3"
		},
		["RDM/VDM - Wartebereich"] = {
			["_anyServerGroup"] = "sound/beep.mp3"
		},
		["Fehler/Bugs - Wartebereich"] = {
			["_anyServerGroup"] = "sound/beep.mp3"
		},
		["Fragen zu Spenden - Wartebereich"] = {
			["_anyServerGroup"] = "sound/beep.mp3"
		}
	}
}
-- /user config

-- Compatibility: Lua-5.1
local function split(str, pat)
	local t = {}  -- NOTE: use {n = 0} in Lua-5.0
	local fpat = "(.-)" .. pat
	local last_end = 1
	local s, e, cap = str:find(fpat, 1)
	while s do
		if s ~= 1 or cap ~= "" then
			table.insert(t,cap)
		end
		last_end = e+1
		s, e, cap = str:find(fpat, last_end)
	end
	if last_end <= #str then
		cap = str:sub(last_end)
		table.insert(t, cap)
	end
	return t
end

--[[local function debugPrint(msg)
	if type(msg) == "table" then
		for k,v in pairs(msg) do
			debugPrint(""..k.."="..v..";")
		end
	else
		print(msg)
	end
end]]--

local monitorCache = {}
local serverGroupMap = {}
local MODULE_NAME = "notifier"

local function errorNotify(errorCode,serverConnectionHandlerID)
	local errorMessage, errorCodeB = ts3.getErrorMessage(errorCode)
	if (errorCodeB ~= ts3errors.ERROR_ok) then
		errorMessage = "Error getting Error Message: " .. errorCodeB .. " for error code: " .. errorCode
	end
	local errorCodeC = ts3.logMessage(errorMessage, ts3defs.LogLevel.LogLevel_ERROR, MODULE_NAME, serverConnectionHandlerID)
	ts3.printMessage(serverConnectionHandlerID, (MODULE_NAME .. errorMessage), 0)
end

local function checkNotify(serverConnectionHandlerID, clientID, channelID, visibility)
	if (visibility == ts3defs.Visibility.LEAVE_VISIBILITY) then return end	-- we don't care about leaves
	local sMonitorCache = monitorCache[serverConnectionHandlerID]
	if (not sMonitorCache) then return end									-- we don't care about this server
	if (clientID == sMonitorCache.myClientID) then return end				-- we don't care about our own moves
	local channelConfig = sMonitorCache.channels[channelID]
	if (not channelConfig) then return end									-- we don't care about this channel
	
	local grps, errorCode = ts3.getClientVariableAsString(serverConnectionHandlerID, clientID, ts3defs.ClientProperties.CLIENT_SERVERGROUPS)
	if (errorCode ~= ts3errors.ERROR_ok) then
		errorNotify(errorCode,serverConnectionHandlerID)
		return
	end
	grps = split(grps,",")

	local sServerGroupMap = serverGroupMap[serverConnectionHandlerID]
	local waveFile
	for _,v in pairs(grps) do
		waveFile = channelConfig[sServerGroupMap[v]]
		if (waveFile) then
			break
		end
	end
	if (not waveFile) then
		waveFile = channelConfig["_anyServerGroup"]
	end
	
	if (waveFile ~= nil) then
		errorCode = ts3.playWaveFile(serverConnectionHandlerID, waveFile)
		if (errorCode ~= ts3errors.ERROR_ok) then
			errorNotify(errorCode,serverConnectionHandlerID)
			return
		end
	end
end

local function onConnectStatusChangeEvent(serverConnectionHandlerID, status, errorNumber)
	if (status == ts3defs.ConnectStatus.STATUS_CONNECTED) then	-- at this point we can get server infos, which is before any onNewChannel Event gets triggered
		-- now we check if we connected to a server we're actually want to monitor
		local result, errorCode = ts3.getServerVariableAsString(serverConnectionHandlerID, ts3defs.VirtualServerProperties.VIRTUALSERVER_NAME)
		if (errorCode ~= ts3errors.ERROR_ok) then
			ts3.printMessage(serverConnectionHandlerID, (MODULE_NAME .. ": Error getting server name: " .. errorCode), 0)
			return
		end
		if (ChannelsToNotify[result]) then
			local myClientID, errorCode = ts3.getClientID(serverConnectionHandlerID)
			if (errorCode ~= ts3errors.ERROR_ok) then
				errorNotify(errorCode,serverConnectionHandlerID)
				return
			end
			monitorCache[serverConnectionHandlerID] = {
				["name"] = result,
				["myClientID"] = myClientID
			}	-- using the existence of the object later onNewChannelEvent
			ts3.printMessage(serverConnectionHandlerID, (MODULE_NAME .. ": Monitoring " .. result), 0)
		end
	elseif (status == ts3defs.ConnectStatus.STATUS_DISCONNECTED) then
		monitorCache[serverConnectionHandlerID] = nil		-- clean up
		serverGroupMap[serverConnectionHandlerID] = nil
	end
end

local function onNewChannelEvent(serverConnectionHandlerID, channelID, channelParentID)
	local sMonitorCache = monitorCache[serverConnectionHandlerID]
	if (not sMonitorCache) then return end -- since we tested the server name on connect we don't need to get the string everytime, which would be more expensive

	local channelName, errorCode = ts3.getChannelVariableAsString(serverConnectionHandlerID, channelID, ts3defs.ChannelProperties.CHANNEL_NAME)
	if (errorCode ~= ts3errors.ERROR_ok) then
		errorNotify(errorCode,serverConnectionHandlerID)
		return
	end
	local channelConfig = ChannelsToNotify[sMonitorCache.name][channelName]
	if (not channelConfig) then return end
	if (not sMonitorCache.channels) then sMonitorCache.channels = {} end
	sMonitorCache.channels[channelID] = channelConfig
	ts3.printMessage(serverConnectionHandlerID, (MODULE_NAME .. ": Monitoring " .. channelName), 0)
end

local function onUpdateChannelEditedEvent(serverConnectionHandlerID, channelID, invokerID, invokerName, invokerUniqueIdentifier)
	local sMonitorCache = monitorCache[serverConnectionHandlerID]
	if (not sMonitorCache) then return end
	if sMonitorCache.channels[channelID] then sMonitorCache.channels[channelID] = nil end -- clear the channel since it was somehow edited
	onNewChannelEvent(serverConnectionHandlerID, channelID, 0)	-- check for (re)addition; more sophisticated solutions with subchannel sensitivity would need to get the parent channel here
end

local function onClientMoveEvent(serverConnectionHandlerID, clientID, oldChannelID, newChannelID, visibility, moveMessage)
	checkNotify(serverConnectionHandlerID, clientID, newChannelID, visibility)
end

local function onClientMoveMovedEvent(serverConnectionHandlerID, clientID, oldChannelID, newChannelID, visibility, moverID, moverName, moverUniqueIdentifier, moveMessage)
	checkNotify(serverConnectionHandlerID, clientID, newChannelID, visibility)
end

local function onServerGroupListEvent(serverConnectionHandlerID, serverGroupID, name, groupType, iconID, saveDB)
	if (not serverGroupMap[serverConnectionHandlerID]) then serverGroupMap[serverConnectionHandlerID] = {} end
	serverGroupMap[serverConnectionHandlerID][tostring(serverGroupID)] = name
end

--[[local function onServerGroupListFinishedEvent(serverConnectionHandlerID)
	if (serverGroupMap[serverConnectionHandlerID]) then
		debugPrint(serverGroupMap[serverConnectionHandlerID])
	end
end]]--

local registeredEvents = {
	["onNewChannelEvent"] = onNewChannelEvent,
	["onConnectStatusChangeEvent"] = onConnectStatusChangeEvent,
	["onClientMoveEvent"] = onClientMoveEvent,
	["onClientMoveMovedEvent"] = onClientMoveMovedEvent,
	["onServerGroupListEvent"] = onServerGroupListEvent --,
	--onServerGroupListFinishedEvent = onServerGroupListFinishedEvent
}
ts3RegisterModule(MODULE_NAME, registeredEvents)

-- test
notifier = {}
notifier.test = function(serverConnectionHandlerID)
	onClientMoveEvent(serverConnectionHandlerID,23,0,1,1,"Move It.")
end

I couldn't get this work with the current version, I set the channel name and server and mp3 file and nothing