Skip to content

Instantly share code, notes, and snippets.

@tieppt

tieppt/config.h

Last active March 26, 2023 02:46
Show Gist options
  • Save tieppt/d11395e36cbe70c4bf64b73d35a16f35 to your computer and use it in GitHub Desktop.
Save tieppt/d11395e36cbe70c4bf64b73d35a16f35 to your computer and use it in GitHub Desktop.
Download ZIP
GMMK Pro & QMK: support Rotary Knob, VIA, turn off RGB when host is suspended
Raw
readme.md
  • path: qmk_firmware/keyboards/gmmk/pro/ansi/keymaps/viapro/readme.md

GMMK Pro & QMK

Compile

qmk compile -kb gmmk/pro/ansi -km viapro
Raw
config.h
// path: qmk_firmware/keyboards/gmmk/pro/ansi/keymaps/viapro/config.h
#pragma once
#ifdef RGB_MATRIX_ENABLE
#define RGB_DISABLE_WHEN_USB_SUSPENDED true
#endif // RGB_MATRIX_ENABLE
Raw
keymap.c
// path: qmk_firmware/keyboards/gmmk/pro/ansi/keymaps/viapro/keymap.c
#include QMK_KEYBOARD_H
// clang-format off
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// ESC F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 Prt Rotary(Mute)
// ~ 1 2 3 4 5 6 7 8 9 0 - (=) BackSpc Home
// Tab Q W E R T Y U I O P [ ] \ PgUp
// Caps A S D F G H J K L ; " Enter PgDn
// Sh_L Z X C V B N M , . ? Sh_R Up End
// Ct_L Win_L Alt_L SPACE Alt_R FN Ct_R Left Down Right
// The FN key by default maps to a momentary toggle to layer 1 to provide access to the RESET key (to put the board into bootloader mode). Without
// this mapping, you have to open the case to hit the button on the bottom of the PCB (near the USB cable attachment) while plugging in the USB
// cable to get the board into bootloader mode - definitely not fun when you're working on your QMK builds. Remove this and put it back to KC_RGUI
// if that's your preference.
//
// To put the keyboard in bootloader mode, use FN+backslash. If you accidentally put it into bootloader, you can just unplug the USB cable and
// it'll be back to normal when you plug it back in.
//
// This keyboard defaults to 6KRO instead of NKRO for compatibility reasons (some KVMs and BIOSes are incompatible with NKRO).
// Since this is, among other things, a "gaming" keyboard, a key combination to enable NKRO on the fly is provided for convenience.
// Press Fn+N to toggle between 6KRO and NKRO. This setting is persisted to the EEPROM and thus persists between restarts.
[0] = LAYOUT(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_MUTE,
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END,
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
),
[1] = LAYOUT(
_______, KC_MYCM, KC_WHOM, KC_CALC, KC_MSEL, KC_MPRV, KC_MNXT, KC_MPLY, KC_MSTP, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______,
_______, RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, _______,
_______, _______, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, RGB_HUI, _______, _______, _______, NK_TOGG, _______, _______, _______, _______, _______, RGB_MOD, _______,
_______, _______, _______, _______, _______, _______, _______, RGB_SPD, RGB_RMOD, RGB_SPI
),
[2] = LAYOUT(
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______
),
[3] = LAYOUT(
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______
),
};
// clang-format on
#ifdef ENCODER_ENABLE
bool encoder_update_user(uint8_t index, bool clockwise) {
if (clockwise) {
tap_code(KC_VOLU);
} else {
tap_code(KC_VOLD);
}
return true;
}
#endif // ENCODER_ENABLE
#ifdef RGB_MATRIX_ENABLE
void suspend_power_down_kb(void) {
rgb_matrix_set_suspend_state(true);
suspend_power_down_user();
}
void suspend_wakeup_init_kb(void) {
rgb_matrix_set_suspend_state(false);
suspend_wakeup_init_user();
}
#endif // RGB_MATRIX_ENABLE
Raw
rules.mk
# path: qmk_firmware/keyboards/gmmk/pro/ansi/keymaps/viapro/rules.mk
VIA_ENABLE = yes
RGB_MATRIX_ENABLE = yes
@JeromePonce
Copy link

hi! do you know where to get the sonix bootloader for gmmk pro?

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment