Last active
August 29, 2015 13:57
-
-
Save tierra/9791768 to your computer and use it in GitHub Desktop.
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[43881.471021] usb 3-3: new SuperSpeed USB device number 3 using xhci_hcd | |
[43881.488529] usb 3-3: New USB device found, idVendor=152d, idProduct=0551 | |
[43881.488538] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=5 | |
[43881.488544] usb 3-3: Product: USB to ATA/ATAPI Bridge | |
[43881.488548] usb 3-3: Manufacturer: JMicron | |
[43881.488551] usb 3-3: SerialNumber: 6290003FFFFF | |
[43886.485186] usb 3-3: Set SEL for device-initiated U1 failed. | |
[43891.483389] usb 3-3: Set SEL for device-initiated U2 failed. | |
[43891.483515] usb-storage 3-3:1.0: USB Mass Storage device detected | |
[43891.483688] scsi5 : usb-storage 3-3:1.0 | |
[43896.481589] usb 3-3: Set SEL for device-initiated U1 failed. | |
[43901.479791] usb 3-3: Set SEL for device-initiated U2 failed. | |
[43923.416088] usb 3-3: reset SuperSpeed USB device number 3 using xhci_hcd | |
[43923.442187] usb 3-3: device descriptor read/8, error -71 | |
[43923.543762] usb 3-3: reset SuperSpeed USB device number 3 using xhci_hcd | |
[43923.570139] usb 3-3: device descriptor read/8, error -71 | |
[43923.727784] usb 3-3: USB disconnect, device number 3 | |
[43923.727803] scsi 5:0:0:0: Device offlined - not ready after error recovery | |
[43923.728015] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802127c0100 | |
[43923.728019] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802127c0140 |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ 99.309501] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd | |
[ 99.336090] Initializing USB Mass Storage driver... | |
[ 99.336500] scsi6 : usb-storage 4-1:1.0 | |
[ 99.336693] usbcore: registered new interface driver usb-storage | |
[ 99.336700] USB Mass Storage support registered. | |
[ 100.332742] scsi 6:0:0:0: Direct-Access H/W RAID 5 PQ: 0 ANSI: 5 | |
[ 100.334434] sd 6:0:0:0: Attached scsi generic sg1 type 0 | |
[ 100.335442] sd 6:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). | |
[ 100.335712] sd 6:0:0:0: [sdb] 23441702912 512-byte logical blocks: (12.0 TB/10.9 TiB) | |
[ 100.336413] sd 6:0:0:0: [sdb] Write Protect is off | |
[ 100.336425] sd 6:0:0:0: [sdb] Mode Sense: 28 00 00 00 | |
[ 100.338859] sd 6:0:0:0: [sdb] No Caching mode page found | |
[ 100.338867] sd 6:0:0:0: [sdb] Assuming drive cache: write through | |
[ 100.339889] sd 6:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). | |
[ 100.341626] sd 6:0:0:0: [sdb] No Caching mode page found | |
[ 100.341633] sd 6:0:0:0: [sdb] Assuming drive cache: write through | |
[ 100.500557] sdb: sdb1 | |
[ 100.501372] sd 6:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). | |
[ 100.503087] sd 6:0:0:0: [sdb] No Caching mode page found | |
[ 100.503095] sd 6:0:0:0: [sdb] Assuming drive cache: write through | |
[ 100.503101] sd 6:0:0:0: [sdb] Attached SCSI disk | |
[ 100.984276] kjournald starting. Commit interval 5 seconds | |
[ 100.988640] EXT3-fs (sdb1): using internal journal | |
[ 100.988654] EXT3-fs (sdb1): mounted filesystem with ordered data mode |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment