Skip to content

Instantly share code, notes, and snippets.

@tinbotu

tinbotu/dmesg

Created August 31, 2011 14:49
Show Gist options
  • Save tinbotu/1183729 to your computer and use it in GitHub Desktop.
Save tinbotu/1183729 to your computer and use it in GitHub Desktop.
Download ZIP
Nexterm TC3500 performance on ubuntu10.4 server, with CF8GB(adata)
Raw
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-33-generic (buildd@zirconium) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #72-Ubuntu SMP Fri Jul 29 21:08:37 UTC 2011 (Ubuntu 2.6.32-33.72-generic 2.6.32.41+drm33.18)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000f7f0000 (usable)
[ 0.000000] BIOS-e820: 000000000f7f0000 - 000000000f7f3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000f7f3000 - 000000000f800000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xf7f0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-CFFFF uncachable
[ 0.000000] D0000-D7FFF write-back
[ 0.000000] D8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FF0000000 write-back
[ 0.000000] 1 base 00F800000 mask FFF800000 uncachable
[ 0.000000] 2 base 0E8000000 mask FFC000000 write-combining
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000000f7f0000 (usable)
[ 0.000000] modified: 000000000f7f0000 - 000000000f7f3000 (ACPI NVS)
[ 0.000000] modified: 000000000f7f3000 - 000000000f800000 (ACPI data)
[ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-000000000f7f0000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 000f7f0000 page 4k
[ 0.000000] kernel direct mapping tables up to f7f0000 @ 10000-51000
[ 0.000000] RAMDISK: 0b293000 - 0ba33eb1
[ 0.000000] ACPI: RSDP 000f7510 00014 (v00 VIA605)
[ 0.000000] ACPI: RSDT 0f7f3040 00028 (v01 VIA605 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 0f7f30c0 00074 (v01 VIA605 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 0f7f3180 02218 (v01 VIA605 AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 0f7f0000 00040
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 247MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 0f7f0000
[ 0.000000] low ram: 0 - 0f7f0000
[ 0.000000] node 0 low ram: 00000000 - 0f7f0000
[ 0.000000] node 0 bootmap 0004b000 - 0004cf00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 000f7f0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008e0ef8] TEXT DATA BSS ==> [0000100000 - 00008e0ef8]
[ 0.000000] #4 [000b293000 - 000ba33eb1] RAMDISK ==> [000b293000 - 000ba33eb1]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [00008e1000 - 00008e4086] BRK ==> [00008e1000 - 00008e4086]
[ 0.000000] #7 [0000010000 - 000004b000] PGTABLE ==> [0000010000 - 000004b000]
[ 0.000000] #8 [000004b000 - 000004d000] BOOTMAP ==> [000004b000 - 000004d000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0000f7f0
[ 0.000000] HighMem 0x0000f7f0 -> 0x0000f7f0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0000f7f0
[ 0.000000] On node 0 totalpages: 63359
[ 0.000000] free_area_init_node: node 0, pgdat c079a7c0, node_mem_map c1001200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 464 pages used for memmap
[ 0.000000] Normal zone: 58912 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at f800000 (gap: f800000:f07f0000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c11f5000 s36312 r0 d21032 u65536
[ 0.000000] pcpu-alloc: s36312 r0 d21032 u65536 alloc=16*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 62863
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-33-generic root=UUID=e1bbf4ab-68a5-4247-93c6-b48c6f325b71 ro rootdelay=120
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 1269120 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 233516k/253888k available (4675k kernel code, 19648k reserved, 2127k data, 668k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xcfff0000 - 0xff7fe000 ( 760 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xcf7f0000 ( 247 MB)
[ 0.000000] .init : 0xc07a5000 - 0xc084c000 ( 668 kB)
[ 0.000000] .data : 0xc0590de7 - 0xc07a4d88 (2127 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0590de7 (4675 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:256
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 533.313 MHz processor.
[ 0.008016] Calibrating delay loop (skipped), value calculated using timer frequency.. 1066.62 BogoMIPS (lpj=2133252)
[ 0.008290] Security Framework initialized
[ 0.008539] AppArmor: AppArmor initialized
[ 0.008650] Mount-cache hash table entries: 512
[ 0.009545] Initializing cgroup subsys ns
[ 0.009629] Initializing cgroup subsys cpuacct
[ 0.009731] Initializing cgroup subsys memory
[ 0.009855] Initializing cgroup subsys devices
[ 0.009937] Initializing cgroup subsys freezer
[ 0.010016] Initializing cgroup subsys net_cls
[ 0.010199] CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
[ 0.010294] CPU: L2 Cache: 64K (32 bytes/line)
[ 0.010442] Performance Events:
[ 0.010516] Checking 'hlt' instruction... OK.
[ 0.024853] SMP alternatives: switching to UP code
[ 0.057777] Freeing SMP alternatives: 19k freed
[ 0.058048] ACPI: Core revision 20090903
[ 0.069447] ACPI: setting ELCR to 0080 (from 1c80)
[ 0.071170] ftrace: converting mcount calls to 66 66 66 66 90
[ 0.071293] ftrace: allocating 21725 entries in 43 pages
[ 0.076434] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.076529] weird, boot CPU (#0) not listed by the BIOS.
[ 0.076608] SMP motherboard not detected.
[ 0.076682] Local APIC not detected. Using dummy APIC emulation.
[ 0.076764] SMP disabled
[ 0.081355] Brought up 1 CPUs
[ 0.081447] Total of 1 processors activated (1066.62 BogoMIPS).
[ 0.081604] CPU0 attaching NULL sched-domain.
[ 0.082442] devtmpfs: initialized
[ 0.085066] regulator: core version 0.5
[ 0.085226] Time: 19:42:38 Date: 08/31/11
[ 0.085675] NET: Registered protocol family 16
[ 0.086558] EISA bus registered
[ 0.086677] ACPI: bus type pci registered
[ 0.118653] PCI: PCI BIOS revision 2.10 entry at 0xfb4d0, last bus=2
[ 0.118740] PCI: Using configuration type 1 for base access
[ 0.126133] bio: create slab <bio-0> at 0
[ 0.128877] ACPI: EC: Look up EC in DSDT
[ 0.146319] ACPI: Interpreter enabled
[ 0.146413] ACPI: (supports S0 S3 S4 S5)
[ 0.146755] ACPI: Using PIC for interrupt routing
[ 0.163587] ACPI: No dock devices found.
[ 0.164229] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.164553] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe8000000-0xebffffff]
[ 0.164761] pci 0000:00:01.0: supports D1
[ 0.165023] pci 0000:00:07.1: reg 20 io port: [0xdd00-0xdd0f]
[ 0.165186] pci 0000:00:07.2: reg 20 io port: [0xe000-0xe01f]
[ 0.165344] pci 0000:00:07.3: reg 20 io port: [0xdc00-0xdc1f]
[ 0.165548] pci 0000:00:07.4: quirk: region 6000-607f claimed by vt82c686 HW-mon
[ 0.165653] pci 0000:00:07.4: quirk: region 5000-500f claimed by vt82c686 SMB
[ 0.165838] pci 0000:00:07.5: reg 10 io port: [0xc000-0xc0ff]
[ 0.165870] pci 0000:00:07.5: reg 14 io port: [0xde00-0xde03]
[ 0.165902] pci 0000:00:07.5: reg 18 io port: [0xdf00-0xdf03]
[ 0.166056] pci 0000:00:09.0: reg 10 io port: [0xc800-0xc8ff]
[ 0.166090] pci 0000:00:09.0: reg 14 32bit mmio: [0xec100000-0xec1000ff]
[ 0.166171] pci 0000:00:09.0: supports D1 D2
[ 0.166193] pci 0000:00:09.0: PME# supported from D1 D2 D3hot D3cold
[ 0.166285] pci 0000:00:09.0: PME# disabled
[ 0.166439] pci 0000:00:0d.0: reg 10 32bit mmio: [0xec101000-0xec101fff]
[ 0.166488] pci 0000:00:0d.0: supports D1 D2
[ 0.166510] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.166602] pci 0000:00:0d.0: PME# disabled
[ 0.166818] pci 0000:01:00.0: reg 10 32bit mmio: [0xec000000-0xec07ffff]
[ 0.166854] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xe0000000-0xe7ffffff]
[ 0.166913] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 0.166968] pci 0000:01:00.0: supports D1 D2
[ 0.167067] pci 0000:00:01.0: bridge 32bit mmio: [0xec000000-0xec0fffff]
[ 0.167099] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xe7ffffff]
[ 0.167170] pci_bus 0000:00: on NUMA node 0
[ 0.167204] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.243088] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[ 0.244445] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.246010] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[ 0.247480] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
[ 0.248769] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.248879] vgaarb: loaded
[ 0.249805] SCSI subsystem initialized
[ 0.250288] libata version 3.00 loaded.
[ 0.250860] usbcore: registered new interface driver usbfs
[ 0.251026] usbcore: registered new interface driver hub
[ 0.251290] usbcore: registered new device driver usb
[ 0.252405] ACPI: WMI: Mapper loaded
[ 0.252486] PCI: Using ACPI for IRQ routing
[ 0.253317] NetLabel: Initializing
[ 0.253390] NetLabel: domain hash size = 128
[ 0.253463] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.253608] NetLabel: unlabeled traffic allowed by default
[ 0.253922] Switching to clocksource tsc
[ 0.265510] AppArmor: AppArmor Filesystem Enabled
[ 0.265673] pnp: PnP ACPI init
[ 0.265856] ACPI: bus type pnp registered
[ 0.277483] pnp: PnP ACPI: found 10 devices
[ 0.277573] ACPI: ACPI bus type pnp unregistered
[ 0.278797] PnPBIOS: Disabled by ACPI PNP
[ 0.278926] system 00:00: iomem range 0xcc000-0xcffff has been reserved
[ 0.279023] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.279121] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.279217] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 0.279315] system 00:00: iomem range 0xf7f0000-0xf7fffff could not be reserved
[ 0.279421] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.279518] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.279613] system 00:00: iomem range 0x100000-0xf7effff could not be reserved
[ 0.279717] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.279840] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.315838] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.315931] pci 0000:00:01.0: IO window: disabled
[ 0.316019] pci 0000:00:01.0: MEM window: 0xec000000-0xec0fffff
[ 0.316112] pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xe7ffffff
[ 0.316207] pci 0000:00:0d.0: CardBus bridge, secondary bus 0000:02
[ 0.316296] pci 0000:00:0d.0: IO window: 0x001000-0x0010ff
[ 0.316383] pci 0000:00:0d.0: IO window: 0x001400-0x0014ff
[ 0.316473] pci 0000:00:0d.0: PREFETCH window: 0x10000000-0x13ffffff
[ 0.316566] pci 0000:00:0d.0: MEM window: 0x14000000-0x17ffffff
[ 0.316675] pci 0000:00:01.0: setting latency timer to 64
[ 0.318975] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 0.319064] PCI: setting IRQ 10 as level-triggered
[ 0.319096] pci 0000:00:0d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 0.319215] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.319241] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.319270] pci_bus 0000:01: resource 1 mem: [0xec000000-0xec0fffff]
[ 0.319298] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xe7ffffff]
[ 0.319327] pci_bus 0000:02: resource 0 io: [0x1000-0x10ff]
[ 0.319354] pci_bus 0000:02: resource 1 io: [0x1400-0x14ff]
[ 0.319381] pci_bus 0000:02: resource 2 pref mem [0x10000000-0x13ffffff]
[ 0.319409] pci_bus 0000:02: resource 3 mem: [0x14000000-0x17ffffff]
[ 0.319658] NET: Registered protocol family 2
[ 0.320423] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.322730] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.323309] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.324013] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.324104] TCP reno registered
[ 0.324822] NET: Registered protocol family 1
[ 0.325002] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.325099] pci 0000:00:07.0: Disabling VIA external APIC routing
[ 0.325294] pci 0000:01:00.0: Boot video device
[ 0.325930] cpufreq-nforce2: No nForce2 chipset.
[ 0.326159] Scanning for low memory corruption every 60 seconds
[ 0.327026] audit: initializing netlink socket (disabled)
[ 0.327153] type=2000 audit(1314819758.325:1): initialized
[ 0.407605] Trying to unpack rootfs image as initramfs...
[ 0.491367] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.523098] VFS: Disk quotas dquot_6.5.2
[ 0.523838] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.534282] fuse init (API version 7.13)
[ 0.535274] msgmni has been set to 456
[ 0.544662] alg: No test for stdrng (krng)
[ 0.545084] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.545188] io scheduler noop registered
[ 0.545261] io scheduler anticipatory registered
[ 0.545340] io scheduler deadline registered
[ 0.545898] io scheduler cfq registered (default)
[ 0.546638] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.546876] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.547635] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.547745] ACPI: Power Button [PWRB]
[ 0.548231] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.548333] ACPI: Power Button [PWRF]
[ 0.549592] Marking TSC unstable due to TSC halts in idle
[ 0.550064] Switching to clocksource acpi_pm
[ 0.550620] processor LNXCPU:00: registered as cooling_device0
[ 0.576254] isapnp: Scanning for PnP cards...
[ 0.644672] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.645124] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.645587] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.646987] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.647570] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.667599] brd: module loaded
[ 0.679560] loop: module loaded
[ 0.680564] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.691636] Fixed MDIO Bus: probed
[ 0.692010] PPP generic driver version 2.4.2
[ 0.692482] tun: Universal TUN/TAP device driver, 1.6
[ 0.692562] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 0.693288] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.693511] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.693680] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.700657] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12
[ 0.700765] PCI: setting IRQ 12 as level-triggered
[ 0.700798] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 12 (level, low) -> IRQ 12
[ 0.700942] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 0.701497] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 0.701671] uhci_hcd 0000:00:07.2: irq 12, io base 0x0000e000
[ 0.702672] usb usb1: configuration #1 chosen from 1 choice
[ 0.702973] hub 1-0:1.0: USB hub found
[ 0.703111] hub 1-0:1.0: 2 ports detected
[ 0.703492] uhci_hcd 0000:00:07.3: PCI INT D -> Link[LNKD] -> GSI 12 (level, low) -> IRQ 12
[ 0.703619] uhci_hcd 0000:00:07.3: UHCI Host Controller
[ 0.703982] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
[ 0.710135] uhci_hcd 0000:00:07.3: irq 12, io base 0x0000dc00
[ 0.711292] usb usb2: configuration #1 chosen from 1 choice
[ 0.711582] hub 2-0:1.0: USB hub found
[ 0.711718] hub 2-0:1.0: 2 ports detected
[ 0.712501] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.712595] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.713061] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.713887] mice: PS/2 mouse device common for all mice
[ 0.715103] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.715244] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 0.716005] device-mapper: uevent: version 1.0.3
[ 0.720904] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected]
[ 0.765161] device-mapper: multipath: version 1.1.0 loaded
[ 0.765246] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.770626] EISA: Probing bus 0 at eisa.0
[ 0.770735] Cannot allocate resource for EISA slot 1
[ 0.770836] Cannot allocate resource for EISA slot 4
[ 0.770915] Cannot allocate resource for EISA slot 5
[ 0.770995] Cannot allocate resource for EISA slot 6
[ 0.771096] EISA: Detected 0 cards.
[ 0.771924] cpuidle: using governor ladder
[ 0.772440] cpuidle: using governor menu
[ 0.775909] TCP cubic registered
[ 0.781490] NET: Registered protocol family 10
[ 0.783535] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.800016] NET: Registered protocol family 17
[ 0.800675] longhaul: VIA C3 'Samuel 2' [C5B] CPU detected. Longhaul v2 supported.
[ 0.800898] longhaul: Using northbridge support.
[ 0.801178] Using IPI No-Shortcut mode
[ 0.801888] PM: Resume from disk failed.
[ 0.801957] registered taskstats version 1
[ 0.802959] Magic number: 7:44:750
[ 0.803109] tty ttyS1: hash matches
[ 0.803374] rtc_cmos 00:04: setting system clock to 2011-08-31 19:42:39 UTC (1314819759)
[ 0.803481] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.803563] EDD information not available.
[ 1.313891] isapnp: No Plug & Play device found
[ 2.781228] Freeing initrd memory: 7811k freed
[ 2.848340] Freeing unused kernel memory: 668k freed
[ 2.855054] Write protecting the kernel text: 4676k
[ 2.855471] Write protecting the kernel read-only data: 1848k
[ 2.998330] udev: starting version 151
[ 4.003130] pata_via 0000:00:07.1: version 0.3.4
[ 4.006741] scsi0 : pata_via
[ 4.022620] scsi1 : pata_via
[ 4.023081] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xdd00 irq 14
[ 4.023178] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xdd08 irq 15
[ 4.196493] ata1.00: ATA-0: , 20071116, max MWDMA2
[ 4.196593] ata1.00: 15433488 sectors, multi 0: LBA
[ 4.212567] ata1.00: configured for MWDMA2
[ 4.213196] scsi 0:0:0:0: Direct-Access ATA 2007 PQ: 0 ANSI: 5
[ 4.215666] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.216962] sd 0:0:0:0: [sda] 15433488 512-byte logical blocks: (7.90 GB/7.35 GiB)
[ 4.217329] sd 0:0:0:0: [sda] Write Protect is off
[ 4.217417] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.217564] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.218552] sda:
[ 34.816198] ata1: lost interrupt (Status 0x58)
[ 34.818482] ata1: drained 1024 bytes to clear DRQ.
[ 34.818533] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 34.818632] ata1.00: failed command: READ DMA
[ 34.818747] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 34.818761] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 34.818938] ata1.00: status: { DRDY }
[ 34.819071] ata1: soft resetting link
[ 35.004567] ata1.00: configured for MWDMA2
[ 35.004661] ata1.00: device reported invalid CHS sector 0
[ 35.004769] ata1: EH complete
[ 65.816127] ata1: lost interrupt (Status 0x58)
[ 65.818350] ata1: drained 1024 bytes to clear DRQ.
[ 65.818385] ata1.00: limiting speed to MWDMA1:PIO4
[ 65.818473] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 65.818569] ata1.00: failed command: READ DMA
[ 65.819695] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 65.819710] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 65.819887] ata1.00: status: { DRDY }
[ 65.820006] ata1: soft resetting link
[ 66.008559] ata1.00: configured for MWDMA1
[ 66.008646] ata1.00: device reported invalid CHS sector 0
[ 66.008749] ata1: EH complete
[ 96.816133] ata1: lost interrupt (Status 0x58)
[ 96.818414] ata1: drained 1024 bytes to clear DRQ.
[ 96.818446] ata1.00: limiting speed to PIO4
[ 96.818531] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 96.818627] ata1.00: failed command: READ DMA
[ 96.818737] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 96.818751] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 96.818928] ata1.00: status: { DRDY }
[ 96.819046] ata1: soft resetting link
[ 97.004561] ata1.00: configured for PIO4
[ 97.004642] ata1.00: device reported invalid CHS sector 0
[ 97.004741] ata1: EH complete
[ 97.006136] sda1 sda2 sda3
[ 97.011544] sda: detected capacity change from 0 to 7901945856
[ 97.014226] sd 0:0:0:0: [sda] Attached SCSI disk
[ 97.062308] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 97.062510] 8139cp 0000:00:09.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 97.139731] 8139too Fast Ethernet driver 0.9.28
[ 97.165931] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 97.166038] PCI: setting IRQ 11 as level-triggered
[ 97.166073] 8139too 0000:00:09.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 97.190807] eth0: RealTek RTL8139 at 0xc800, 00:e0:4c:69:27:5c, IRQ 11
[ 97.386430] kjournald starting. Commit interval 5 seconds
[ 97.386568] EXT3-fs: mounted filesystem with ordered data mode.
[ 100.050272] Adding 685048k swap on /dev/sda2. Priority:-1 extents:1 across:685048k
[ 100.360530] udev: starting version 151
[ 100.408163] EXT3 FS on sda1, internal journal
[ 102.769495] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 103.716796] Linux agpgart interface v0.103
[ 104.345731] parport_pc: VIA 686A/8231 detected
[ 104.345758] parport_pc: probing current configuration
[ 104.345795] parport_pc: Current parallel port base: 0x0
[ 104.345815] parport_pc: VIA parallel port disabled in BIOS
[ 104.561269] agpgart: Detected VIA ProSavage PM133/PL133/PN133 chipset
[ 104.628130] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe8000000
[ 104.921683] lp: driver loaded but no devices found
[ 105.263717] type=1505 audit(1314819863.956:2): operation="profile_load" pid=442 name="/sbin/dhclient3"
[ 105.283348] type=1505 audit(1314819863.976:3): operation="profile_load" pid=442 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 105.294084] type=1505 audit(1314819863.988:4): operation="profile_replace" pid=430 name="/sbin/dhclient3"
[ 105.296338] type=1505 audit(1314819863.992:5): operation="profile_replace" pid=430 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 105.312503] type=1505 audit(1314819864.008:6): operation="profile_load" pid=442 name="/usr/lib/connman/scripts/dhclient-script"
[ 105.349268] type=1505 audit(1314819864.044:7): operation="profile_replace" pid=430 name="/usr/lib/connman/scripts/dhclient-script"
[ 105.523671] ppdev: user-space parallel port driver
[ 105.914618] yenta_cardbus 0000:00:0d.0: CardBus bridge found [3412:7856]
[ 105.955588] vga16fb: initializing
[ 105.955629] vga16fb: mapped to 0xc00a0000
[ 105.956902] fb0: VGA16 VGA frame buffer device
[ 106.040767] yenta_cardbus 0000:00:0d.0: ISA IRQ mask 0x0000, PCI irq 10
[ 106.040797] yenta_cardbus 0000:00:0d.0: Socket status: 30000006
[ 106.381256] type=1505 audit(1314819865.076:8): operation="profile_load" pid=453 name="/usr/sbin/ntpd"
[ 106.417831] type=1505 audit(1314819865.112:9): operation="profile_replace" pid=456 name="/usr/sbin/ntpd"
[ 106.536255] kjournald starting. Commit interval 5 seconds
[ 106.537904] EXT3 FS on sda3, internal journal
[ 106.537941] EXT3-fs: mounted filesystem with ordered data mode.
[ 107.031069] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x220-0x22f 0x388-0x38f
[ 107.043092] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 107.044982] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 107.080789] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 107.082766] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 107.227498] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[ 108.204233] Console: switching to colour frame buffer device 80x30
[ 110.607903] VIA 82xx Audio 0000:00:07.5: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 110.608355] VIA 82xx Audio 0000:00:07.5: setting latency timer to 64
[ 112.875511] type=1505 audit(1314819871.568:10): operation="profile_replace" pid=649 name="/sbin/dhclient3"
[ 112.901692] type=1505 audit(1314819871.596:11): operation="profile_replace" pid=649 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 112.902832] type=1505 audit(1314819871.596:12): operation="profile_replace" pid=649 name="/usr/lib/connman/scripts/dhclient-script"
[ 113.070927] type=1505 audit(1314819871.764:13): operation="profile_load" pid=664 name="/usr/sbin/named"
[ 113.127127] type=1505 audit(1314819871.820:14): operation="profile_replace" pid=667 name="/usr/sbin/ntpd"
[ 113.204307] type=1505 audit(1314819871.900:15): operation="profile_load" pid=668 name="/usr/sbin/tcpdump"
[ 117.972054] eth0: no IPv6 routers present
Raw
gistfile1.txt
-------------------------- CPU --------------------------
kuma@nexterm:~$ cat /proc/cpuinfo
processor : 0
vendor_id : CentaurHauls
cpu family : 6
model : 7
model name : VIA Samuel 2
stepping : 3
cpu MHz : 399.000
cache size : 64 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu de tsc msr cx8 mtrr pge mmx 3dnow up
bogomips : 800.00
clflush size : 32
cache_alignment : 32
address sizes : 32 bits physical, 32 bits virtual
power management:
# cpufreqd いれた
kuma@nexterm:~$ sudo cpufreq-set -g performance
kuma@nexterm:~$ cat /proc/cpuinfo
processor : 0
vendor_id : CentaurHauls
cpu family : 6
model : 7
model name : VIA Samuel 2
stepping : 3
cpu MHz : 532.000
cache size : 64 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu de tsc msr cx8 mtrr pge mmx 3dnow up
bogomips : 1066.62
clflush size : 32
cache_alignment : 32
address sizes : 32 bits physical, 32 bits virtual
power management:
# はやい!!
kuma@nexterm:~$ free -m
total used free shared buffers cached
Mem: 236 192 43 0 31 121
-/+ buffers/cache: 40 196
Swap: 668 0 668
kuma@nexterm:~$ mbw 64
Long uses 4 bytes. Allocating 2*16777216 elements = 134217728 bytes of memory.
Using 262144 bytes as blocks for memcpy block copy test.
Getting down to business... Doing 10 runs per test.
0 Method: MEMCPY Elapsed: 1.04177 MiB: 64.00000 Copy: 61.434 MiB/s
1 Method: MEMCPY Elapsed: 1.04933 MiB: 64.00000 Copy: 60.992 MiB/s
2 Method: MEMCPY Elapsed: 1.04159 MiB: 64.00000 Copy: 61.444 MiB/s
3 Method: MEMCPY Elapsed: 1.04941 MiB: 64.00000 Copy: 60.987 MiB/s
4 Method: MEMCPY Elapsed: 1.04571 MiB: 64.00000 Copy: 61.202 MiB/s
5 Method: MEMCPY Elapsed: 1.19207 MiB: 64.00000 Copy: 53.688 MiB/s
6 Method: MEMCPY Elapsed: 1.04135 MiB: 64.00000 Copy: 61.459 MiB/s
7 Method: MEMCPY Elapsed: 1.04930 MiB: 64.00000 Copy: 60.993 MiB/s
8 Method: MEMCPY Elapsed: 1.04312 MiB: 64.00000 Copy: 61.354 MiB/s
9 Method: MEMCPY Elapsed: 1.04929 MiB: 64.00000 Copy: 60.994 MiB/s
AVG Method: MEMCPY Elapsed: 1.06029 MiB: 64.00000 Copy: 60.361 MiB/s
0 Method: DUMB Elapsed: 0.89382 MiB: 64.00000 Copy: 71.603 MiB/s
1 Method: DUMB Elapsed: 0.90159 MiB: 64.00000 Copy: 70.986 MiB/s
2 Method: DUMB Elapsed: 0.89402 MiB: 64.00000 Copy: 71.587 MiB/s
3 Method: DUMB Elapsed: 0.90168 MiB: 64.00000 Copy: 70.979 MiB/s
4 Method: DUMB Elapsed: 0.89533 MiB: 64.00000 Copy: 71.482 MiB/s
5 Method: DUMB Elapsed: 0.90164 MiB: 64.00000 Copy: 70.982 MiB/s
6 Method: DUMB Elapsed: 0.89382 MiB: 64.00000 Copy: 71.602 MiB/s
7 Method: DUMB Elapsed: 0.89376 MiB: 64.00000 Copy: 71.607 MiB/s
8 Method: DUMB Elapsed: 0.90175 MiB: 64.00000 Copy: 70.973 MiB/s
9 Method: DUMB Elapsed: 0.89537 MiB: 64.00000 Copy: 71.479 MiB/s
AVG Method: DUMB Elapsed: 0.89728 MiB: 64.00000 Copy: 71.327 MiB/s
0 Method: MCBLOCK Elapsed: 0.90665 MiB: 64.00000 Copy: 70.590 MiB/s
1 Method: MCBLOCK Elapsed: 0.89504 MiB: 64.00000 Copy: 71.505 MiB/s
2 Method: MCBLOCK Elapsed: 0.90302 MiB: 64.00000 Copy: 70.873 MiB/s
3 Method: MCBLOCK Elapsed: 0.89521 MiB: 64.00000 Copy: 71.491 MiB/s
4 Method: MCBLOCK Elapsed: 0.90437 MiB: 64.00000 Copy: 70.767 MiB/s
5 Method: MCBLOCK Elapsed: 0.89664 MiB: 64.00000 Copy: 71.378 MiB/s
6 Method: MCBLOCK Elapsed: 0.89504 MiB: 64.00000 Copy: 71.505 MiB/s
7 Method: MCBLOCK Elapsed: 0.90300 MiB: 64.00000 Copy: 70.875 MiB/s
8 Method: MCBLOCK Elapsed: 0.89512 MiB: 64.00000 Copy: 71.499 MiB/s
9 Method: MCBLOCK Elapsed: 0.90295 MiB: 64.00000 Copy: 70.879 MiB/s
AVG Method: MCBLOCK Elapsed: 0.89971 MiB: 64.00000 Copy: 71.134 MiB/s
# おそい...
-------------------------- PERIPHERAL --------------------------
kuma@nexterm:~$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8605 [ProSavage PM133]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8605 [PM133 AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1a)
00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1a)
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50)
00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:0d.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 81)
01:00.0 VGA compatible controller: S3 Inc. 86C380 [ProSavageDDR K4M266] (rev 02)
kuma@nexterm:~$ sensors
via686a-isa-6000
Adapter: ISA adapter
Vcore: +1.23 V (min = +0.06 V, max = +3.10 V)
in1: +2.48 V (min = +2.36 V, max = +2.61 V)
+3.3V: +3.28 V (min = +2.98 V, max = +3.63 V)
+5V: +4.93 V (min = +4.51 V, max = +5.50 V)
+12V: +12.12 V (min = +10.81 V, max = +13.20 V)
fan1: 0 RPM (min = 675000 RPM, div = 2)
fan2: 0 RPM (min = 10546 RPM, div = 2)
temp1: +52.0 C (high = +146.2 C, hyst = -70.9 C)
temp2: +46.8 C (high = +146.2 C, hyst = -70.9 C)
temp3: +26.5 C (high = -42.8 C, hyst = -35.0 C) ALARM
# ファンレスなのでそれなりにあつい
-------------------------- DISK --------------------------
# ADATA speedy 8G ( Read 16020kB/s, Write 8843kB/s )
kuma@nexterm:~$ df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 5.5G 918M 4.1G 19% /
none 115M 180K 114M 1% /dev
none 119M 0 119M 0% /dev/shm
none 119M 64K 119M 1% /var/run
none 119M 0 119M 0% /var/lock
none 119M 0 119M 0% /lib/init/rw
/dev/sda3 1.1G 34M 1.1G 4% /opt
kuma@nexterm:~$ sudo hdparm -Tt /dev/sda1
[sudo] password for kuma:
/dev/sda1:
Timing cached reads: 102 MB in 2.02 seconds = 50.45 MB/sec
Timing buffered disk reads: 12 MB in 3.03 seconds = 3.96 MB/sec
# PIO!?
# このCF自体がUDMA対応してない可能性大
kuma@nexterm:~$ sudo hdparm -v /dev/sda
/dev/sda:
multcount = 0 (off)
IO_support = 0 (default)
readonly = 0 (off)
readahead = 256 (on)
geometry = 960/255/63, sectors = 15433488, start = 0
-------------------------- NET --------------------------
kuma@nexterm:~$ netperf -H 192.168.20.10
TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.20.10 (192.168.20.10) port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
87380 16384 16384 10.06 94.61
kuma@nexterm:~$ ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:e0:4c:xx:xx:xx
inet addr:192.168.20.129 Bcast:192.168.20.255 Mask:255.255.255.0
inet6 addr: fe80::2e0:x:x:x/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:42921 errors:0 dropped:0 overruns:0 frame:0
TX packets:82084 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3082174 (3.0 MB) TX bytes:123396671 (123.3 MB)
Interrupt:11 Base address:0xc800
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:2170 errors:0 dropped:0 overruns:0 frame:0
TX packets:2170 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:185301 (185.3 KB) TX bytes:185301 (185.3 KB)
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment