Skip to content

Instantly share code, notes, and snippets.

@tinbotu
Created December 18, 2011 19:27
Show Gist options
  • Save tinbotu/1494206 to your computer and use it in GitHub Desktop.
Save tinbotu/1494206 to your computer and use it in GitHub Desktop.
ix2015 software update, 7.5.62 to 8.3.48
NEC Diagnostic Software
Copyright (c) 2001-2006 NEC Infrontia All Rights Reserved.
%DIAG-INFO: Starting System POST(Power On Self Test)
DRAM TEST 1: Pass
DRAM TEST 2: Pass
NVRAM TEST: Pass
CPU TEST: Pass
PLD TEST: Pass
LAN1(FE0/0) TEST: Pass
LAN2(FE0/1) TEST: Pass
SECURITY TEST: Pass
VOLTAGE STATUS: 3.251V Pass
TEMPERATURE STATUS: +17.0degC Pass
NEC Bootstrap Software
Copyright (c) 2001-2006 NEC Infrontia All Rights Reserved.
%BOOT-INFO: No boot records found, attempting flash load.
%BOOT-INFO: Trying flash load, exec-image [ix2010-ms-7.5.62.ldc].
Loading: ############################################### [OK]
NEC Diagnostic Software
Copyright (c) 2001-2006 NEC Infrontia All Rights Reserved.
%DIAG-INFO: Starting Interface Unit POST(Power On Self Test)
%DIAG-INFO: Interface unit is 4FESW-BRI
HUB(SW)1-4 TEST: Pass
BRI TEST: Pass
Starting at 0x20000
Configuring router subsystems (before IDB proc): done.
Constructing IDB(Interface Database): done.
Configuring router subsystems (after IDB proc): done.
Initializing router subsystems: done.
Starting router subsystems: done.
All router subsystems coming up.
NEC Portable Internetwork Core Operating System Software
Copyright Notices:
Copyright (c) 2001-2006 NEC Infrontia All Rights Reserved.
Copyright (c) 1985-1998 OpenROUTE Networks, Inc.
Copyright (c) 1984-1987, 1989 J. Noel Chiappa.
Router# en
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)# interface FastEthernet0/1.0
Router(config-FastEthernet0/1.0)# ip address 192.168.20.4/24
Router(config-FastEthernet0/1.0)# no shutdown
Router(config-FastEthernet0/1.0)# exit
Router(config)# ping 192.168.20.10
PING 192.168.20.4 > 192.168.20.10 56 data bytes
64 bytes from 192.168.20.10: icmp_seq=0. time=3.147 ms
64 bytes from 192.168.20.10: icmp_seq=1. time=0.297 ms
Router(config)# tftp get 192.168.20.10:/ix2010-boot-22.34-gate-ms-8.3.48.rap ix2010-boot-22.34-gate-ms-8.3.48.rap
..........................................................................................................................................................................................................................................TFTP error - Disk Full
Erasing ix2010-boot-22.34-gate-ms-8.3.48.rap. Be patient...
Router(config)# sh flash
Length Name/status
3086743 ix2010-ms-7.5.62.ldc runnable
[3086743 bytes used, 3926770 available, 7013513 total]
6912 Kbytes of processor board System flash (Read/Write)
Router(config)# erase ix2010-ms-7.5.62.ldc
Now erasing ix2010-ms-7.5.62.ldc, please wait...
Router(config)#
Router(config)# sh flash
Length Name/status
[0 bytes used, 7068274 available, 7068274 total]
6912 Kbytes of processor board System flash (Read/Write)
Router(config)#
Router(config)# tftp get 192.168.20.10:/ix2010-boot-22.34-gate-ms-8.3.48.rap ix
2010-boot-22.34-gate-ms-8.3.48.rap
...................................................................................................................................................................................................................................................................
TFTP transfer complete
Router(config)#
Router(config)# sh flash
Length Name/status
4348345 ix2010-boot-22.34-gate-ms-8.3.48.rap runnable
[4348345 bytes used, 2683258 available, 7031603 total]
6912 Kbytes of processor board System flash (Read/Write)
Router(config)# exit
Router(config)#
Router# reload
% Warning: current running-configuration is not saved yet.
Notice: The router will be RELOADED. This is to ensure that
the peripheral devices are properly initialized.
Are you sure you want to reload the router? (Yes or [No]): y
NEC Bootstrap Software
Copyright (c) 2001-2006 NEC Infrontia All Rights Reserved.
%BOOT-INFO: No boot records found, attempting flash load.
%BOOT-INFO: Trying flash load, exec-image [ix2010-boot-22.34-gate-ms-8.3.48.rap].
Loading: ################################################################## [OK]
NEC Bootstrap Software, Version 22.34
Copyright (c) 2001-2008 NEC Infrontia All Rights Reserved.
***** FLASH MEMORY IMAGE UPDATER *****
%UPDATE-INFO: Starting update.
%UPDATE-INFO: [Bootstrap Software] [Gateway Software]
%UPDATE-INFO: Cleanup all FLASH area, please wait for a while.
%UPDATE-INFO: 0x004b0040 > 0xfe4b0000 update done.
%UPDATE-INFO: Update completed.
NEC Bootstrap Software
Copyright (c) 2001-2008 NEC Infrontia All Rights Reserved.
%BOOT-INFO: No boot records found, attempting flash load.
%BOOT-INFO: Trying flash load, exec-image [ix2010-ms-8.3.48.ldc].
Loading: ######################################################## [OK]
Starting at 0x20000
Configuring router subsystems (before IDB proc): done.
Constructing IDB(Interface Database): done.
Configuring router subsystems (after IDB proc): done.
Initializing router subsystems: done.
Starting router subsystems: done.
All router subsystems coming up.
NEC Portable Internetwork Core Operating System Software
Copyright Notices:
Copyright (c) 2001-2008 NEC Infrontia All Rights Reserved.
Copyright (c) 1985-1998 OpenROUTE Networks, Inc.
Copyright (c) 1984-1987, 1989 J. Noel Chiappa.
Router#
Router# sh ver
NEC Portable Internetwork Core Operating System Software
IX Series IX2010 (magellan-sec) Software, Version 8.3.48, RELEASE SOFTWARE
Compiled May 10-Tue-2011 15:33:32 JST #1 by sw-build, coregen-8.3(48)
ROM: System Bootstrap, Version 22.34
System Diagnostic, Version 20.31
System uptime is 1 minute
System woke up by reload, caused by command execution
System started at Dec 19-Mon-2011 04:10:30 JST
System image file is "ix2010-ms-8.3.48.ldc"
Processor board ID <2>
IX2015 (MPC8270A) processor with 65536K bytes of memory.
3 FastEthernet/IEEE 802.3 interfaces
1 ISDN Basic Rate interface
512K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
This product includes software developed by the OpenSSL Project
for use in the OpenSSL Toolkit (http://www.openssl.org/).
Router#
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment