Trevor tjcim

tjcim / gist:f275d5d85e6c5dda875032a732f164ca

Last active August 22, 2020 17:57

2020 Archlinux on Intel NUC10i7 - 2 Harddrives - UEFI/GPT - LVM on LUKS

	###########################################
	We will use GPT and grub as the bootloader.

	# First Hard drive (nvme0n1)
	The ESP will reside in the first partition mounted to /efi.
	The kernel and initramfs will be the second partition and will be mounted to /boot
	The third partition on nvme0n1 will be encrypted with Luks with a password.
	The encrypted partition on the first drive will always require a password to be manually entered on boot.

	# Second Hard drive (sda)

tjcim / gist:86e553532b37d78ad76505ac68fe5ad5

Last active October 13, 2019 04:16

Archlinux - GPT and Grub2 on one disk

	# Download and verify iso
	gpg --verify archlinux-2017.01.01-dual.iso.sig

	# Burn iso to USB
	dd if=archlinux-*.iso of=/dev/sdX bs=16M && sync

	# Boot usb image and set root passwd (this is a temp password used for install only)
	passwd

	# Ensure time is correct

tjcim / gist:33df05f834a453beac1931d3c6574af9

Created November 17, 2017 21:22

dd overwrite with ETA and Progress

	# Shows progress indicator and ETA for dd
	sudo dd if=/dev/zero \| pv -s 4T \| sudo dd iflag=fullblock of=/dev/sdc oflag=direct bs=4096

tjcim / Arch Linux - UEFI 2 HDDs Install

Last active December 9, 2017 06:27 — forked from HardenedArray/Efficient Encrypted UEFI-Booting Arch Installation

How I install a new computer for a workstation

	# Download and verify iso
	gpg --verify archlinux-2017.01.01-dual.iso.sig

	# Burn iso to USB
	dd if=archlinux-*.iso of=/dev/sdX bs=16M && sync

	# Boot usb image and set root passwd (this is a temp password used for install only)
	passwd

	# Ensure time is correct