Created
March 19, 2020 07:10
-
-
Save tknopp/e3382177435cb50b804eba545edf1ea2 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
knopp@knopp-HP-EliteDesk-800-G2-SFF:~/red-pitaya-notes$ sudo sh scripts/alpine.sh | |
[sudo] Passwort für knopp: | |
mkdir: das Verzeichnis »alpine-apk“ kann nicht angelegt werden: Die Datei existiert bereits | |
30938 Blöcke | |
Image Name: | |
Created: Thu Mar 19 08:08:46 2020 | |
Image Type: ARM Linux RAMDisk Image (gzip compressed) | |
Data Size: 2534371 Bytes = 2474.97 KiB = 2.42 MiB | |
Load Address: 00000000 | |
Entry Point: 00000000 | |
find: ‘tmp/linux-4.19’: Datei oder Verzeichnis nicht gefunden | |
tar: tmp/linux-4.19: Funktion open fehlgeschlagen: Datei oder Verzeichnis nicht gefunden | |
tar: Error is not recoverable: exiting now | |
cp: Aufruf von stat für 'tmp/linux-4.19/modules.order' nicht möglich: Datei oder Verzeichnis nicht gefunden | |
cp: Aufruf von stat für 'tmp/linux-4.19/modules.builtin' nicht möglich: Datei oder Verzeichnis nicht gefunden | |
depmod: WARNING: could not open /home/knopp/red-pitaya-notes/alpine-modloop/lib/modules/4.19.84-xilinx/modules.order: No such file or directory | |
depmod: WARNING: could not open /home/knopp/red-pitaya-notes/alpine-modloop/lib/modules/4.19.84-xilinx/modules.builtin: No such file or directory | |
Found a valid exportable SQUASHFS superblock on modloop. | |
Compression used xz | |
Inodes are compressed | |
Data is compressed | |
Fragments are compressed | |
Xattrs are compressed | |
Fragments are present in the filesystem | |
Always-use-fragments option is not specified | |
Duplicates are removed | |
Xattrs are stored | |
Filesystem size 11713.39 Kbytes (11.44 Mbytes) | |
Block size 1048576 | |
Number of fragments 34 | |
Number of inodes 1120 | |
Number of ids 3 | |
Parallel mksquashfs: Using 4 processors | |
Scanning existing filesystem... | |
Read existing filesystem, 1119 inodes scanned | |
Appending to existing 4.0 filesystem on modloop, block size 1048576 | |
All -b, -noI, -noD, -noF, -noX, no-duplicates, no-fragments, -always-use-fragments, | |
-exportable and -comp options ignored | |
If appending is not wanted, please re-run with -noappend specified! | |
Recovery file "squashfs_recovery_modloop_25852" written | |
If Mksquashfs aborts abnormally (i.e. power failure), run | |
mksquashfs dummy modloop -recover squashfs_recovery_modloop_25852 | |
to restore filesystem | |
Source directory entry modules already used! - trying modules_1 | |
Source directory entry modules_1 already used! - trying modules_2 | |
Source directory entry modules_2 already used! - trying modules_3 | |
[============================================================================================================================/] 119/119 100% | |
Exportable Squashfs 4.0 filesystem, xz compressed, data block size 1048576 | |
compressed data, compressed metadata, compressed fragments, compressed xattrs | |
duplicates are removed | |
Filesystem size 11714.98 Kbytes (11.44 Mbytes) | |
11.16% of uncompressed filesystem size (104941.02 Kbytes) | |
Inode table size 9310 bytes (9.09 Kbytes) | |
22.93% of uncompressed inode table size (40594 bytes) | |
Directory table size 11860 bytes (11.58 Kbytes) | |
37.55% of uncompressed directory table size (31581 bytes) | |
Number of duplicate files found 712 | |
Number of inodes 1252 | |
Number of files 1008 | |
Number of fragments 35 | |
Number of symbolic links 20 | |
Number of device nodes 0 | |
Number of fifo nodes 0 | |
Number of socket nodes 0 | |
Number of directories 224 | |
Number of ids (unique uids + gids) 3 | |
Number of uids 2 | |
root (0) | |
unknown (38193) | |
Number of gids 2 | |
root (0) | |
unknown (1021) | |
cp: Aufruf von stat für '/usr/bin/qemu-arm-static' nicht möglich: Datei oder Verzeichnis nicht gefunden | |
ln: Die symbolische Verknüpfung 'alpine-root/etc/apk/cache' konnte nicht angelegt werden: Die Datei existiert bereits | |
cp: Aufruf von stat für 'projects/led_blinker/server/*' nicht möglich: Datei oder Verzeichnis nicht gefunden | |
cp: Aufruf von stat für 'tmp/led_blinker.bit' nicht möglich: Datei oder Verzeichnis nicht gefunden | |
cp: Aufruf von stat für 'tmp/sdr_receiver_hpsdr.bit' nicht möglich: Datei oder Verzeichnis nicht gefunden | |
cp: Aufruf von stat für 'tmp/sdr_transceiver.bit' nicht möglich: Datei oder Verzeichnis nicht gefunden | |
cp: Aufruf von stat für 'tmp/sdr_transceiver_emb.bit' nicht möglich: Datei oder Verzeichnis nicht gefunden | |
cp: Aufruf von stat für 'projects/sdr_transceiver_ft8/server/*' nicht möglich: Datei oder Verzeichnis nicht gefunden | |
cp: Aufruf von stat für 'tmp/sdr_transceiver_ft8.bit' nicht möglich: Datei oder Verzeichnis nicht gefunden | |
cp: Aufruf von stat für 'tmp/sdr_transceiver_hpsdr.bit' nicht möglich: Datei oder Verzeichnis nicht gefunden | |
cp: Aufruf von stat für 'tmp/sdr_transceiver_wide.bit' nicht möglich: Datei oder Verzeichnis nicht gefunden | |
cp: Aufruf von stat für 'projects/sdr_transceiver_wspr/server/*' nicht möglich: Datei oder Verzeichnis nicht gefunden | |
cp: Aufruf von stat für 'tmp/sdr_transceiver_wspr.bit' nicht möglich: Datei oder Verzeichnis nicht gefunden | |
cp: Aufruf von stat für 'tmp/mcpha.bit' nicht möglich: Datei oder Verzeichnis nicht gefunden | |
cp: Aufruf von stat für 'tmp/vna.bit' nicht möglich: Datei oder Verzeichnis nicht gefunden | |
chroot: failed to run command ‘/sbin/apk.static’: No such file or directory | |
chroot: failed to run command ‘/bin/sh’: No such file or directory | |
cp: Aufruf von stat für 'alpine-root/media/mmcblk0p1/red-pitaya.apkovl.tar.gz' nicht möglich: Datei oder Verzeichnis nicht gefunden | |
zip warning: name not matched: boot.bin | |
zip warning: name not matched: devicetree.dtb | |
zip warning: name not matched: red-pitaya.apkovl.tar.gz | |
zip warning: name not matched: uImage | |
adding: apps/ (stored 0%) | |
adding: apps/index.html (deflated 65%) | |
adding: apps/server/ (stored 0%) | |
adding: apps/server/server.c (deflated 61%) | |
adding: apps/server/Makefile (deflated 23%) | |
adding: apps/sdr_transceiver_ft8/ (stored 0%) | |
adding: apps/sdr_transceiver_ft8/index.html (deflated 55%) | |
adding: apps/sdr_transceiver_ft8/sleep-rand.c (deflated 40%) | |
adding: apps/sdr_transceiver_ft8/i2c-write.c (deflated 51%) | |
adding: apps/sdr_transceiver_ft8/write-c2-files.c (deflated 67%) | |
adding: apps/sdr_transceiver_ft8/update-corr.sh (deflated 16%) | |
adding: apps/sdr_transceiver_ft8/start.sh (deflated 53%) | |
adding: apps/sdr_transceiver_ft8/upload-to-pskreporter.c (deflated 70%) | |
adding: apps/sdr_transceiver_ft8/stop.sh (deflated 34%) | |
adding: apps/sdr_transceiver_ft8/ft8.cron (deflated 61%) | |
adding: apps/sdr_transceiver_ft8/write-c2-files.cfg (deflated 62%) | |
adding: apps/sdr_transceiver_ft8/decode-ft8.sh (deflated 41%) | |
adding: apps/sdr_transceiver_ft8/measure-corr.c (deflated 57%) | |
adding: apps/sdr_transceiver_ft8/sleep-to-59.c (deflated 30%) | |
adding: apps/sdr_transceiver_ft8/Makefile (deflated 54%) | |
adding: apps/sdr_transceiver_ft8/upload-ft8.sh (deflated 39%) | |
adding: apps/sdr_receiver_hpsdr/ (stored 0%) | |
adding: apps/sdr_receiver_hpsdr/index.html (deflated 62%) | |
adding: apps/sdr_receiver_hpsdr/start.sh (deflated 44%) | |
adding: apps/sdr_receiver_hpsdr/sdr-receiver-hpsdr.c (deflated 75%) | |
adding: apps/sdr_receiver_hpsdr/stop.sh (stored 0%) | |
adding: apps/sdr_receiver_hpsdr/Makefile (deflated 31%) | |
adding: apps/sdr_transceiver_wspr/ (stored 0%) | |
adding: apps/sdr_transceiver_wspr/index.html (deflated 55%) | |
adding: apps/sdr_transceiver_wspr/i2c-write.c (deflated 51%) | |
adding: apps/sdr_transceiver_wspr/write-c2-files.c (deflated 67%) | |
adding: apps/sdr_transceiver_wspr/update-corr.sh (deflated 16%) | |
adding: apps/sdr_transceiver_wspr/README (deflated 42%) | |
adding: apps/sdr_transceiver_wspr/start.sh (deflated 54%) | |
adding: apps/sdr_transceiver_wspr/wspr.cron (deflated 62%) | |
adding: apps/sdr_transceiver_wspr/transmit-wspr-message.c (deflated 68%) | |
adding: apps/sdr_transceiver_wspr/transmit-wspr-message.cfg (deflated 35%) | |
adding: apps/sdr_transceiver_wspr/gpio-output.c (deflated 45%) | |
adding: apps/sdr_transceiver_wspr/stop.sh (deflated 35%) | |
adding: apps/sdr_transceiver_wspr/write-c2-files.cfg (deflated 65%) | |
adding: apps/sdr_transceiver_wspr/decode-wspr.sh (deflated 42%) | |
adding: apps/sdr_transceiver_wspr/transmit-wspr.sh (deflated 38%) | |
adding: apps/sdr_transceiver_wspr/measure-corr.c (deflated 57%) | |
adding: apps/sdr_transceiver_wspr/sleep-to-59.c (deflated 30%) | |
adding: apps/sdr_transceiver_wspr/Makefile (deflated 58%) | |
adding: apps/vna/ (stored 0%) | |
adding: apps/vna/index.html (deflated 62%) | |
adding: apps/vna/start.sh (deflated 27%) | |
adding: apps/vna/stop.sh (stored 0%) | |
adding: apps/vna/vna.c (deflated 71%) | |
adding: apps/vna/Makefile (deflated 14%) | |
adding: apps/led_blinker/ (stored 0%) | |
adding: apps/led_blinker/index.html (deflated 51%) | |
adding: apps/led_blinker/led_blinker.bit (deflated 93%) | |
adding: apps/led_blinker/start.sh (deflated 24%) | |
adding: apps/mcpha/ (stored 0%) | |
adding: apps/mcpha/index.html (deflated 65%) | |
adding: apps/mcpha/start.sh (deflated 39%) | |
adding: apps/mcpha/stop.sh (deflated 29%) | |
adding: apps/mcpha/pha-server.c (deflated 72%) | |
adding: apps/mcpha/Makefile (deflated 44%) | |
adding: apps/mcpha/mcpha-server.c (deflated 78%) | |
adding: apps/stop.sh (deflated 10%) | |
adding: apps/sdr_transceiver_hpsdr/ (stored 0%) | |
adding: apps/sdr_transceiver_hpsdr/index.html (deflated 61%) | |
adding: apps/sdr_transceiver_hpsdr/start.sh (deflated 43%) | |
adding: apps/sdr_transceiver_hpsdr/stop.sh (stored 0%) | |
adding: apps/sdr_transceiver_hpsdr/sdr-transceiver-hpsdr.c (deflated 77%) | |
adding: apps/sdr_transceiver_hpsdr/Makefile (deflated 54%) | |
adding: apps/sdr_transceiver_wide/ (stored 0%) | |
adding: apps/sdr_transceiver_wide/index.html (deflated 60%) | |
adding: apps/sdr_transceiver_wide/start.sh (deflated 42%) | |
adding: apps/sdr_transceiver_wide/stop.sh (stored 0%) | |
adding: apps/sdr_transceiver_wide/sdr-transceiver-wide.c (deflated 78%) | |
adding: apps/sdr_transceiver_wide/Makefile (deflated 34%) | |
adding: apps/sdr_transceiver/ (stored 0%) | |
adding: apps/sdr_transceiver/index.html (deflated 60%) | |
adding: apps/sdr_transceiver/sdr-transceiver.c (deflated 77%) | |
adding: apps/sdr_transceiver/start.sh (deflated 49%) | |
adding: apps/sdr_transceiver/stop.sh (stored 0%) | |
adding: apps/sdr_transceiver/Makefile (deflated 29%) | |
adding: apps/sdr_transceiver_emb/ (stored 0%) | |
adding: apps/sdr_transceiver_emb/index.html (deflated 54%) | |
adding: apps/sdr_transceiver_emb/patches/ (stored 0%) | |
adding: apps/sdr_transceiver_emb/patches/wdsp.patch (deflated 49%) | |
adding: apps/sdr_transceiver_emb/patches/Makefile (deflated 52%) | |
adding: apps/sdr_transceiver_emb/start.sh (deflated 47%) | |
adding: apps/sdr_transceiver_emb/sdr-transceiver-emb.c (deflated 75%) | |
adding: apps/sdr_transceiver_emb/stop.sh (stored 0%) | |
adding: apps/sdr_transceiver_emb/wdsp-fftw-wisdom.txt (deflated 65%) | |
adding: apps/sdr_transceiver_emb/Makefile (deflated 47%) | |
adding: apps/css/ (stored 0%) | |
adding: apps/css/pygments.css (deflated 84%) | |
adding: apps/css/main.css (deflated 57%) | |
adding: cache/ (stored 0%) | |
adding: modloop (deflated 0%) | |
adding: uEnv.txt (deflated 61%) | |
adding: uInitrd (deflated 0%) | |
adding: wifi/ (stored 0%) | |
adding: wifi/client.sh (deflated 41%) | |
adding: wifi/hotspot.sh (deflated 41%) |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment