Skip to content

Instantly share code, notes, and snippets.

@tobgu

tobgu/cassandra-env22.sh

Created April 12, 2016 20:55
Show Gist options
  • Save tobgu/29bb48cfba1eae29098a34fdf7d969e7 to your computer and use it in GitHub Desktop.
Save tobgu/29bb48cfba1eae29098a34fdf7d969e7 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
cassandra-env22.sh
# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements. See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership. The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
calculate_heap_sizes()
{
case "`uname`" in
Linux)
system_memory_in_mb=`free -m | awk '/:/ {print $2;exit}'`
system_cpu_cores=`egrep -c 'processor([[:space:]]+):.*' /proc/cpuinfo`
;;
FreeBSD)
system_memory_in_bytes=`sysctl hw.physmem | awk '{print $2}'`
system_memory_in_mb=`expr $system_memory_in_bytes / 1024 / 1024`
system_cpu_cores=`sysctl hw.ncpu | awk '{print $2}'`
;;
SunOS)
system_memory_in_mb=`prtconf | awk '/Memory size:/ {print $3}'`
system_cpu_cores=`psrinfo | wc -l`
;;
Darwin)
system_memory_in_bytes=`sysctl hw.memsize | awk '{print $2}'`
system_memory_in_mb=`expr $system_memory_in_bytes / 1024 / 1024`
system_cpu_cores=`sysctl hw.ncpu | awk '{print $2}'`
;;
*)
# assume reasonable defaults for e.g. a modern desktop or
# cheap server
system_memory_in_mb="2048"
system_cpu_cores="2"
;;
esac
# some systems like the raspberry pi don't report cores, use at least 1
if [ "$system_cpu_cores" -lt "1" ]
then
system_cpu_cores="1"
fi
# set max heap size based on the following
# max(min(1/2 ram, 1024MB), min(1/4 ram, 8GB))
# calculate 1/2 ram and cap to 1024MB
# calculate 1/4 ram and cap to 8192MB
# pick the max
half_system_memory_in_mb=`expr $system_memory_in_mb / 2`
quarter_system_memory_in_mb=`expr $half_system_memory_in_mb / 2`
if [ "$half_system_memory_in_mb" -gt "1024" ]
then
half_system_memory_in_mb="1024"
fi
if [ "$quarter_system_memory_in_mb" -gt "8192" ]
then
quarter_system_memory_in_mb="8192"
fi
if [ "$half_system_memory_in_mb" -gt "$quarter_system_memory_in_mb" ]
then
max_heap_size_in_mb="$half_system_memory_in_mb"
else
max_heap_size_in_mb="$quarter_system_memory_in_mb"
fi
MAX_HEAP_SIZE="${max_heap_size_in_mb}M"
# Young gen: min(max_sensible_per_modern_cpu_core * num_cores, 1/4 * heap size)
max_sensible_yg_per_core_in_mb="100"
max_sensible_yg_in_mb=`expr $max_sensible_yg_per_core_in_mb "*" $system_cpu_cores`
desired_yg_in_mb=`expr $max_heap_size_in_mb / 4`
if [ "$desired_yg_in_mb" -gt "$max_sensible_yg_in_mb" ]
then
HEAP_NEWSIZE="${max_sensible_yg_in_mb}M"
else
HEAP_NEWSIZE="${desired_yg_in_mb}M"
fi
}
# Determine the sort of JVM we'll be running on.
java_ver_output=`"${JAVA:-java}" -version 2>&1`
jvmver=`echo "$java_ver_output" | grep '[openjdk|java] version' | awk -F'"' 'NR==1 {print $2}'`
JVM_VERSION=${jvmver%_*}
JVM_PATCH_VERSION=${jvmver#*_}
if [ "$JVM_VERSION" \< "1.7" ] ; then
echo "Cassandra 2.0 and later require Java 7u25 or later."
exit 1;
fi
if [ "$JVM_VERSION" \< "1.8" ] && [ "$JVM_PATCH_VERSION" \< "25" ] ; then
echo "Cassandra 2.0 and later require Java 7u25 or later."
exit 1;
fi
jvm=`echo "$java_ver_output" | grep -A 1 'java version' | awk 'NR==2 {print $1}'`
case "$jvm" in
OpenJDK)
JVM_VENDOR=OpenJDK
# this will be "64-Bit" or "32-Bit"
JVM_ARCH=`echo "$java_ver_output" | awk 'NR==3 {print $2}'`
;;
"Java(TM)")
JVM_VENDOR=Oracle
# this will be "64-Bit" or "32-Bit"
JVM_ARCH=`echo "$java_ver_output" | awk 'NR==3 {print $3}'`
;;
*)
# Help fill in other JVM values
JVM_VENDOR=other
JVM_ARCH=unknown
;;
esac
# Override these to set the amount of memory to allocate to the JVM at
# start-up. For production use you may wish to adjust this for your
# environment. MAX_HEAP_SIZE is the total amount of memory dedicated
# to the Java heap; HEAP_NEWSIZE refers to the size of the young
# generation. Both MAX_HEAP_SIZE and HEAP_NEWSIZE should be either set
# or not (if you set one, set the other).
#
# The main trade-off for the young generation is that the larger it
# is, the longer GC pause times will be. The shorter it is, the more
# expensive GC will be (usually).
#
# The example HEAP_NEWSIZE assumes a modern 8-core+ machine for decent pause
# times. If in doubt, and if you do not particularly want to tweak, go with
# 100 MB per physical CPU core.
#MAX_HEAP_SIZE="4G"
#HEAP_NEWSIZE="800M"
# Set this to control the amount of arenas per-thread in glibc
#export MALLOC_ARENA_MAX=4
if [ "x$MAX_HEAP_SIZE" = "x" ] && [ "x$HEAP_NEWSIZE" = "x" ]; then
calculate_heap_sizes
else
if [ "x$MAX_HEAP_SIZE" = "x" ] || [ "x$HEAP_NEWSIZE" = "x" ]; then
echo "please set or unset MAX_HEAP_SIZE and HEAP_NEWSIZE in pairs (see cassandra-env.sh)"
exit 1
fi
fi
if [ "x$MALLOC_ARENA_MAX" = "x" ]
then
export MALLOC_ARENA_MAX=4
fi
# Specifies the default port over which Cassandra will be available for
# JMX connections.
# For security reasons, you should not expose this port to the internet. Firewall it if needed.
JMX_PORT="7199"
# Here we create the arguments that will get passed to the jvm when
# starting cassandra.
# enable assertions. disabling this in production will give a modest
# performance benefit (around 5%).
JVM_OPTS="$JVM_OPTS -ea"
# add the jamm javaagent
JVM_OPTS="$JVM_OPTS -javaagent:$CASSANDRA_HOME/lib/jamm-0.3.0.jar"
# some JVMs will fill up their heap when accessed via JMX, see CASSANDRA-6541
JVM_OPTS="$JVM_OPTS -XX:+CMSClassUnloadingEnabled"
# enable thread priorities, primarily so we can give periodic tasks
# a lower priority to avoid interfering with client workload
JVM_OPTS="$JVM_OPTS -XX:+UseThreadPriorities"
# allows lowering thread priority without being root. see
# http://tech.stolsvik.com/2010/01/linux-java-thread-priorities-workaround.html
JVM_OPTS="$JVM_OPTS -XX:ThreadPriorityPolicy=42"
# min and max heap sizes should be set to the same value to avoid
# stop-the-world GC pauses during resize, and so that we can lock the
# heap in memory on startup to prevent any of it from being swapped
# out.
JVM_OPTS="$JVM_OPTS -Xms${MAX_HEAP_SIZE}"
JVM_OPTS="$JVM_OPTS -Xmx${MAX_HEAP_SIZE}"
JVM_OPTS="$JVM_OPTS -Xmn${HEAP_NEWSIZE}"
JVM_OPTS="$JVM_OPTS -XX:+HeapDumpOnOutOfMemoryError"
# set jvm HeapDumpPath with CASSANDRA_HEAPDUMP_DIR
if [ "x$CASSANDRA_HEAPDUMP_DIR" != "x" ]; then
JVM_OPTS="$JVM_OPTS -XX:HeapDumpPath=$CASSANDRA_HEAPDUMP_DIR/cassandra-`date +%s`-pid$$.hprof"
fi
startswith() { [ "${1#$2}" != "$1" ]; }
# Per-thread stack size.
JVM_OPTS="$JVM_OPTS -Xss256k"
# Larger interned string table, for gossip's benefit (CASSANDRA-6410)
JVM_OPTS="$JVM_OPTS -XX:StringTableSize=1000003"
# GC tuning options
JVM_OPTS="$JVM_OPTS -XX:+UseParNewGC"
JVM_OPTS="$JVM_OPTS -XX:+UseConcMarkSweepGC"
JVM_OPTS="$JVM_OPTS -XX:+CMSParallelRemarkEnabled"
JVM_OPTS="$JVM_OPTS -XX:SurvivorRatio=8"
JVM_OPTS="$JVM_OPTS -XX:MaxTenuringThreshold=1"
JVM_OPTS="$JVM_OPTS -XX:CMSInitiatingOccupancyFraction=75"
JVM_OPTS="$JVM_OPTS -XX:+UseCMSInitiatingOccupancyOnly"
JVM_OPTS="$JVM_OPTS -XX:+UseTLAB"
JVM_OPTS="$JVM_OPTS -XX:+PerfDisableSharedMem"
JVM_OPTS="$JVM_OPTS -XX:CompileCommandFile=$CASSANDRA_CONF/hotspot_compiler"
JVM_OPTS="$JVM_OPTS -XX:CMSWaitDuration=10000"
# note: bash evals '1.7.x' as > '1.7' so this is really a >= 1.7 jvm check
if { [ "$JVM_VERSION" \> "1.7" ] && [ "$JVM_VERSION" \< "1.8.0" ] && [ "$JVM_PATCH_VERSION" -ge "60" ]; } || [ "$JVM_VERSION" \> "1.8" ] ; then
JVM_OPTS="$JVM_OPTS -XX:+CMSParallelInitialMarkEnabled -XX:+CMSEdenChunksRecordAlways -XX:CMSWaitDuration=10000"
fi
if [ "$JVM_ARCH" = "64-Bit" ] ; then
JVM_OPTS="$JVM_OPTS -XX:+UseCondCardMark"
fi
# GC logging options
JVM_OPTS="$JVM_OPTS -XX:+PrintGCDetails"
JVM_OPTS="$JVM_OPTS -XX:+PrintGCDateStamps"
JVM_OPTS="$JVM_OPTS -XX:+PrintHeapAtGC"
JVM_OPTS="$JVM_OPTS -XX:+PrintTenuringDistribution"
JVM_OPTS="$JVM_OPTS -XX:+PrintGCApplicationStoppedTime"
JVM_OPTS="$JVM_OPTS -XX:+PrintPromotionFailure"
#JVM_OPTS="$JVM_OPTS -XX:PrintFLSStatistics=1"
JVM_OPTS="$JVM_OPTS -Xloggc:/var/log/cassandra/gc.log"
JVM_OPTS="$JVM_OPTS -XX:+UseGCLogFileRotation"
JVM_OPTS="$JVM_OPTS -XX:NumberOfGCLogFiles=10"
JVM_OPTS="$JVM_OPTS -XX:GCLogFileSize=10M"
# if using version before JDK 6u34 or 7u2 use this instead of log rotation
# JVM_OPTS="$JVM_OPTS -Xloggc:/var/log/cassandra/gc-`date +%s`.log"
# uncomment to have Cassandra JVM listen for remote debuggers/profilers on port 1414
# JVM_OPTS="$JVM_OPTS -agentlib:jdwp=transport=dt_socket,server=y,suspend=n,address=1414"
# uncomment to have Cassandra JVM log internal method compilation (developers only)
# JVM_OPTS="$JVM_OPTS -XX:+UnlockDiagnosticVMOptions -XX:+LogCompilation"
# JVM_OPTS="$JVM_OPTS -XX:+UnlockCommercialFeatures -XX:+FlightRecorder"
# Prefer binding to IPv4 network intefaces (when net.ipv6.bindv6only=1). See
# http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6342561 (short version:
# comment out this entry to enable IPv6 support).
JVM_OPTS="$JVM_OPTS -Djava.net.preferIPv4Stack=true"
# jmx: metrics and administration interface
#
# add this if you're having trouble connecting:
# JVM_OPTS="$JVM_OPTS -Djava.rmi.server.hostname=<public name>"
#
# see
# https://blogs.oracle.com/jmxetc/entry/troubleshooting_connection_problems_in_jconsole
# for more on configuring JMX through firewalls, etc. (Short version:
# get it working with no firewall first.)
#
# Cassandra ships with JMX accessible *only* from localhost.
# To enable remote JMX connections, uncomment lines below
# with authentication and/or ssl enabled. See https://wiki.apache.org/cassandra/JmxSecurity
#
if [ "x$LOCAL_JMX" = "x" ]; then
LOCAL_JMX=yes
fi
if [ "$LOCAL_JMX" = "yes" ]; then
JVM_OPTS="$JVM_OPTS -Dcassandra.jmx.local.port=$JMX_PORT -XX:+DisableExplicitGC"
else
JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.port=$JMX_PORT"
JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.rmi.port=$JMX_PORT"
JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.ssl=false"
JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.authenticate=true"
JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.password.file=/etc/cassandra/jmxremote.password"
# JVM_OPTS="$JVM_OPTS -Djavax.net.ssl.keyStore=/path/to/keystore"
# JVM_OPTS="$JVM_OPTS -Djavax.net.ssl.keyStorePassword=<keystore-password>"
# JVM_OPTS="$JVM_OPTS -Djavax.net.ssl.trustStore=/path/to/truststore"
# JVM_OPTS="$JVM_OPTS -Djavax.net.ssl.trustStorePassword=<truststore-password>"
# JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.ssl.need.client.auth=true"
# JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.registry.ssl=true"
# JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.ssl.enabled.protocols=<enabled-protocols>"
# JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.ssl.enabled.cipher.suites=<enabled-cipher-suites>"
fi
# To use mx4j, an HTML interface for JMX, add mx4j-tools.jar to the lib/
# directory.
# See http://wiki.apache.org/cassandra/Operations#Monitoring_with_MX4J
# By default mx4j listens on 0.0.0.0:8081. Uncomment the following lines
# to control its listen address and port.
#MX4J_ADDRESS="-Dmx4jaddress=127.0.0.1"
#MX4J_PORT="-Dmx4jport=8081"
# Cassandra uses SIGAR to capture OS metrics CASSANDRA-7838
# for SIGAR we have to set the java.library.path
# to the location of the native libraries.
JVM_OPTS="$JVM_OPTS -Djava.library.path=$CASSANDRA_HOME/lib/sigar-bin"
JVM_OPTS="$JVM_OPTS $MX4J_ADDRESS"
JVM_OPTS="$JVM_OPTS $MX4J_PORT"
JVM_OPTS="$JVM_OPTS $JVM_EXTRA_OPTS"
Raw
cassandra-env33.sh
# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements. See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership. The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
calculate_heap_sizes()
{
case "`uname`" in
Linux)
system_memory_in_mb=`free -m | awk '/:/ {print $2;exit}'`
system_cpu_cores=`egrep -c 'processor([[:space:]]+):.*' /proc/cpuinfo`
;;
FreeBSD)
system_memory_in_bytes=`sysctl hw.physmem | awk '{print $2}'`
system_memory_in_mb=`expr $system_memory_in_bytes / 1024 / 1024`
system_cpu_cores=`sysctl hw.ncpu | awk '{print $2}'`
;;
SunOS)
system_memory_in_mb=`prtconf | awk '/Memory size:/ {print $3}'`
system_cpu_cores=`psrinfo | wc -l`
;;
Darwin)
system_memory_in_bytes=`sysctl hw.memsize | awk '{print $2}'`
system_memory_in_mb=`expr $system_memory_in_bytes / 1024 / 1024`
system_cpu_cores=`sysctl hw.ncpu | awk '{print $2}'`
;;
*)
# assume reasonable defaults for e.g. a modern desktop or
# cheap server
system_memory_in_mb="2048"
system_cpu_cores="2"
;;
esac
# some systems like the raspberry pi don't report cores, use at least 1
if [ "$system_cpu_cores" -lt "1" ]
then
system_cpu_cores="1"
fi
# set max heap size based on the following
# max(min(1/2 ram, 1024MB), min(1/4 ram, 8GB))
# calculate 1/2 ram and cap to 1024MB
# calculate 1/4 ram and cap to 8192MB
# pick the max
half_system_memory_in_mb=`expr $system_memory_in_mb / 2`
quarter_system_memory_in_mb=`expr $half_system_memory_in_mb / 2`
if [ "$half_system_memory_in_mb" -gt "1024" ]
then
half_system_memory_in_mb="1024"
fi
if [ "$quarter_system_memory_in_mb" -gt "8192" ]
then
quarter_system_memory_in_mb="8192"
fi
if [ "$half_system_memory_in_mb" -gt "$quarter_system_memory_in_mb" ]
then
max_heap_size_in_mb="$half_system_memory_in_mb"
else
max_heap_size_in_mb="$quarter_system_memory_in_mb"
fi
MAX_HEAP_SIZE="${max_heap_size_in_mb}M"
# Young gen: min(max_sensible_per_modern_cpu_core * num_cores, 1/4 * heap size)
max_sensible_yg_per_core_in_mb="100"
max_sensible_yg_in_mb=`expr $max_sensible_yg_per_core_in_mb "*" $system_cpu_cores`
desired_yg_in_mb=`expr $max_heap_size_in_mb / 4`
if [ "$desired_yg_in_mb" -gt "$max_sensible_yg_in_mb" ]
then
HEAP_NEWSIZE="${max_sensible_yg_in_mb}M"
else
HEAP_NEWSIZE="${desired_yg_in_mb}M"
fi
}
# Determine the sort of JVM we'll be running on.
java_ver_output=`"${JAVA:-java}" -version 2>&1`
jvmver=`echo "$java_ver_output" | grep '[openjdk|java] version' | awk -F'"' 'NR==1 {print $2}'`
JVM_VERSION=${jvmver%_*}
JVM_PATCH_VERSION=${jvmver#*_}
if [ "$JVM_VERSION" \< "1.8" ] ; then
echo "Cassandra 3.0 and later require Java 8u40 or later."
exit 1;
fi
if [ "$JVM_VERSION" \< "1.8" ] && [ "$JVM_PATCH_VERSION" \< "40" ] ; then
echo "Cassandra 3.0 and later require Java 8u40 or later."
exit 1;
fi
jvm=`echo "$java_ver_output" | grep -A 1 'java version' | awk 'NR==2 {print $1}'`
case "$jvm" in
OpenJDK)
JVM_VENDOR=OpenJDK
# this will be "64-Bit" or "32-Bit"
JVM_ARCH=`echo "$java_ver_output" | awk 'NR==3 {print $2}'`
;;
"Java(TM)")
JVM_VENDOR=Oracle
# this will be "64-Bit" or "32-Bit"
JVM_ARCH=`echo "$java_ver_output" | awk 'NR==3 {print $3}'`
;;
*)
# Help fill in other JVM values
JVM_VENDOR=other
JVM_ARCH=unknown
;;
esac
# Override these to set the amount of memory to allocate to the JVM at
# start-up. For production use you may wish to adjust this for your
# environment. MAX_HEAP_SIZE is the total amount of memory dedicated
# to the Java heap. HEAP_NEWSIZE refers to the size of the young
# generation. Both MAX_HEAP_SIZE and HEAP_NEWSIZE should be either set
# or not (if you set one, set the other).
#
# The main trade-off for the young generation is that the larger it
# is, the longer GC pause times will be. The shorter it is, the more
# expensive GC will be (usually).
#
# The example HEAP_NEWSIZE assumes a modern 8-core+ machine for decent pause
# times. If in doubt, and if you do not particularly want to tweak, go with
# 100 MB per physical CPU core.
#MAX_HEAP_SIZE="4G"
#HEAP_NEWSIZE="800M"
# Set this to control the amount of arenas per-thread in glibc
#export MALLOC_ARENA_MAX=4
# only calculate the size if it's not set manually
if [ "x$MAX_HEAP_SIZE" = "x" ] && [ "x$HEAP_NEWSIZE" = "x" ]; then
calculate_heap_sizes
else
if [ "x$MAX_HEAP_SIZE" = "x" ] || [ "x$HEAP_NEWSIZE" = "x" ]; then
echo "please set or unset MAX_HEAP_SIZE and HEAP_NEWSIZE in pairs (see cassandra-env.sh)"
exit 1
fi
fi
if [ "x$MALLOC_ARENA_MAX" = "x" ] ; then
export MALLOC_ARENA_MAX=4
fi
#GC log path has to be defined here because it needs to access CASSANDRA_HOME
JVM_OPTS="$JVM_OPTS -Xloggc:/var/log/cassandra/gc.log"
# Here we create the arguments that will get passed to the jvm when
# starting cassandra.
# Read user-defined JVM options from jvm.options file
JVM_OPTS_FILE=$CASSANDRA_CONF/jvm.options
for opt in `grep "^-" $JVM_OPTS_FILE`
do
JVM_OPTS="$JVM_OPTS $opt"
done
# Check what parameters were defined on jvm.options file to avoid conflicts
echo $JVM_OPTS | grep -q Xmn
DEFINED_XMN=$?
echo $JVM_OPTS | grep -q Xmx
DEFINED_XMX=$?
echo $JVM_OPTS | grep -q Xms
DEFINED_XMS=$?
echo $JVM_OPTS | grep -q UseConcMarkSweepGC
USING_CMS=$?
# We only set -Xms and -Xmx if they were not defined on jvm.options file
# If defined, both Xmx and Xms should be defined together.
if [ $DEFINED_XMX -ne 0 ] && [ $DEFINED_XMS -ne 0 ]; then
JVM_OPTS="$JVM_OPTS -Xms${MAX_HEAP_SIZE}"
JVM_OPTS="$JVM_OPTS -Xmx${MAX_HEAP_SIZE}"
elif [ $DEFINED_XMX -ne 0 ] || [ $DEFINED_XMS -ne 0 ]; then
echo "Please set or unset -Xmx and -Xms flags in pairs on jvm.options file."
exit 1
fi
# We only set -Xmn flag if it was not defined in jvm.options file
# and if the CMS GC is being used
# If defined, both Xmn and Xmx should be defined together.
if [ $DEFINED_XMN -eq 0 ] && [ $DEFINED_XMX -ne 0 ]; then
echo "Please set or unset -Xmx and -Xmn flags in pairs on jvm.options file."
exit 1
elif [ $DEFINED_XMN -ne 0 ] && [ $USING_CMS -eq 0 ]; then
JVM_OPTS="$JVM_OPTS -Xmn${HEAP_NEWSIZE}"
fi
if [ "$JVM_ARCH" = "64-Bit" ] && [ $USING_CMS -eq 0 ]; then
JVM_OPTS="$JVM_OPTS -XX:+UseCondCardMark"
fi
# provides hints to the JIT compiler
JVM_OPTS="$JVM_OPTS -XX:CompileCommandFile=$CASSANDRA_CONF/hotspot_compiler"
# add the jamm javaagent
JVM_OPTS="$JVM_OPTS -javaagent:$CASSANDRA_HOME/lib/jamm-0.3.0.jar"
# set jvm HeapDumpPath with CASSANDRA_HEAPDUMP_DIR
if [ "x$CASSANDRA_HEAPDUMP_DIR" != "x" ]; then
JVM_OPTS="$JVM_OPTS -XX:HeapDumpPath=$CASSANDRA_HEAPDUMP_DIR/cassandra-`date +%s`-pid$$.hprof"
fi
# jmx: metrics and administration interface
#
# add this if you're having trouble connecting:
# JVM_OPTS="$JVM_OPTS -Djava.rmi.server.hostname=<public name>"
#
# see
# https://blogs.oracle.com/jmxetc/entry/troubleshooting_connection_problems_in_jconsole
# for more on configuring JMX through firewalls, etc. (Short version:
# get it working with no firewall first.)
#
# Cassandra ships with JMX accessible *only* from localhost.
# To enable remote JMX connections, uncomment lines below
# with authentication and/or ssl enabled. See https://wiki.apache.org/cassandra/JmxSecurity
#
if [ "x$LOCAL_JMX" = "x" ]; then
LOCAL_JMX=yes
fi
# Specifies the default port over which Cassandra will be available for
# JMX connections.
# For security reasons, you should not expose this port to the internet. Firewall it if needed.
JMX_PORT="7199"
if [ "$LOCAL_JMX" = "yes" ]; then
JVM_OPTS="$JVM_OPTS -Dcassandra.jmx.local.port=$JMX_PORT -XX:+DisableExplicitGC"
else
JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.port=$JMX_PORT"
JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.rmi.port=$JMX_PORT"
JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.ssl=false"
JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.authenticate=true"
JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.password.file=/etc/cassandra/jmxremote.password"
# JVM_OPTS="$JVM_OPTS -Djavax.net.ssl.keyStore=/path/to/keystore"
# JVM_OPTS="$JVM_OPTS -Djavax.net.ssl.keyStorePassword=<keystore-password>"
# JVM_OPTS="$JVM_OPTS -Djavax.net.ssl.trustStore=/path/to/truststore"
# JVM_OPTS="$JVM_OPTS -Djavax.net.ssl.trustStorePassword=<truststore-password>"
# JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.ssl.need.client.auth=true"
# JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.registry.ssl=true"
# JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.ssl.enabled.protocols=<enabled-protocols>"
# JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.ssl.enabled.cipher.suites=<enabled-cipher-suites>"
fi
# To use mx4j, an HTML interface for JMX, add mx4j-tools.jar to the lib/
# directory.
# See http://wiki.apache.org/cassandra/Operations#Monitoring_with_MX4J
# By default mx4j listens on 0.0.0.0:8081. Uncomment the following lines
# to control its listen address and port.
#MX4J_ADDRESS="-Dmx4jaddress=127.0.0.1"
#MX4J_PORT="-Dmx4jport=8081"
# Cassandra uses SIGAR to capture OS metrics CASSANDRA-7838
# for SIGAR we have to set the java.library.path
# to the location of the native libraries.
JVM_OPTS="$JVM_OPTS -Djava.library.path=$CASSANDRA_HOME/lib/sigar-bin"
JVM_OPTS="$JVM_OPTS $MX4J_ADDRESS"
JVM_OPTS="$JVM_OPTS $MX4J_PORT"
JVM_OPTS="$JVM_OPTS $JVM_EXTRA_OPTS"
Raw
cassandra22.yaml
# Cassandra storage config YAML
# NOTE:
# See http://wiki.apache.org/cassandra/StorageConfiguration for
# full explanations of configuration directives
# /NOTE
# The name of the cluster. This is mainly used to prevent machines in
# one logical cluster from joining another.
cluster_name: 'Test Cluster'
# This defines the number of tokens randomly assigned to this node on the ring
# The more tokens, relative to other nodes, the larger the proportion of data
# that this node will store. You probably want all nodes to have the same number
# of tokens assuming they have equal hardware capability.
#
# If you leave this unspecified, Cassandra will use the default of 1 token for legacy compatibility,
# and will use the initial_token as described below.
#
# Specifying initial_token will override this setting on the node's initial start,
# on subsequent starts, this setting will apply even if initial token is set.
#
# If you already have a cluster with 1 token per node, and wish to migrate to
# multiple tokens per node, see http://wiki.apache.org/cassandra/Operations
num_tokens: 256
# initial_token allows you to specify tokens manually. While you can use # it with
# vnodes (num_tokens > 1, above) -- in which case you should provide a
# comma-separated list -- it's primarily used when adding nodes # to legacy clusters
# that do not have vnodes enabled.
# initial_token:
# See http://wiki.apache.org/cassandra/HintedHandoff
# May either be "true" or "false" to enable globally, or contain a list
# of data centers to enable per-datacenter.
# hinted_handoff_enabled: DC1,DC2
hinted_handoff_enabled: true
# this defines the maximum amount of time a dead host will have hints
# generated. After it has been dead this long, new hints for it will not be
# created until it has been seen alive and gone down again.
max_hint_window_in_ms: 10800000 # 3 hours
# Maximum throttle in KBs per second, per delivery thread. This will be
# reduced proportionally to the number of nodes in the cluster. (If there
# are two nodes in the cluster, each delivery thread will use the maximum
# rate; if there are three, each will throttle to half of the maximum,
# since we expect two nodes to be delivering hints simultaneously.)
hinted_handoff_throttle_in_kb: 1024
# Number of threads with which to deliver hints;
# Consider increasing this number when you have multi-dc deployments, since
# cross-dc handoff tends to be slower
max_hints_delivery_threads: 2
# Maximum throttle in KBs per second, total. This will be
# reduced proportionally to the number of nodes in the cluster.
batchlog_replay_throttle_in_kb: 1024
# Authentication backend, implementing IAuthenticator; used to identify users
# Out of the box, Cassandra provides org.apache.cassandra.auth.{AllowAllAuthenticator,
# PasswordAuthenticator}.
#
# - AllowAllAuthenticator performs no checks - set it to disable authentication.
# - PasswordAuthenticator relies on username/password pairs to authenticate
# users. It keeps usernames and hashed passwords in system_auth.credentials table.
# Please increase system_auth keyspace replication factor if you use this authenticator.
# If using PasswordAuthenticator, CassandraRoleManager must also be used (see below)
authenticator: AllowAllAuthenticator
# Authorization backend, implementing IAuthorizer; used to limit access/provide permissions
# Out of the box, Cassandra provides org.apache.cassandra.auth.{AllowAllAuthorizer,
# CassandraAuthorizer}.
#
# - AllowAllAuthorizer allows any action to any user - set it to disable authorization.
# - CassandraAuthorizer stores permissions in system_auth.permissions table. Please
# increase system_auth keyspace replication factor if you use this authorizer.
authorizer: AllowAllAuthorizer
# Part of the Authentication & Authorization backend, implementing IRoleManager; used
# to maintain grants and memberships between roles.
# Out of the box, Cassandra provides org.apache.cassandra.auth.CassandraRoleManager,
# which stores role information in the system_auth keyspace. Most functions of the
# IRoleManager require an authenticated login, so unless the configured IAuthenticator
# actually implements authentication, most of this functionality will be unavailable.
#
# - CassandraRoleManager stores role data in the system_auth keyspace. Please
# increase system_auth keyspace replication factor if you use this role manager.
role_manager: CassandraRoleManager
# Validity period for roles cache (fetching permissions can be an
# expensive operation depending on the authorizer). Granted roles are cached for
# authenticated sessions in AuthenticatedUser and after the period specified
# here, become eligible for (async) reload.
# Defaults to 2000, set to 0 to disable.
# Will be disabled automatically for AllowAllAuthenticator.
roles_validity_in_ms: 2000
# Refresh interval for roles cache (if enabled).
# After this interval, cache entries become eligible for refresh. Upon next
# access, an async reload is scheduled and the old value returned until it
# completes. If roles_validity_in_ms is non-zero, then this must be
# also.
# Defaults to the same value as roles_validity_in_ms.
# roles_update_interval_in_ms: 1000
# Validity period for permissions cache (fetching permissions can be an
# expensive operation depending on the authorizer, CassandraAuthorizer is
# one example). Defaults to 2000, set to 0 to disable.
# Will be disabled automatically for AllowAllAuthorizer.
permissions_validity_in_ms: 2000
# Refresh interval for permissions cache (if enabled).
# After this interval, cache entries become eligible for refresh. Upon next
# access, an async reload is scheduled and the old value returned until it
# completes. If permissions_validity_in_ms is non-zero, then this must be
# also.
# Defaults to the same value as permissions_validity_in_ms.
# permissions_update_interval_in_ms: 1000
# The partitioner is responsible for distributing groups of rows (by
# partition key) across nodes in the cluster. You should leave this
# alone for new clusters. The partitioner can NOT be changed without
# reloading all data, so when upgrading you should set this to the
# same partitioner you were already using.
#
# Besides Murmur3Partitioner, partitioners included for backwards
# compatibility include RandomPartitioner, ByteOrderedPartitioner, and
# OrderPreservingPartitioner.
#
partitioner: org.apache.cassandra.dht.Murmur3Partitioner
# Directories where Cassandra should store data on disk. Cassandra
# will spread data evenly across them, subject to the granularity of
# the configured compaction strategy.
# If not set, the default directory is $CASSANDRA_HOME/data/data.
data_file_directories:
- /var/lib/cassandra/data
# commit log. when running on magnetic HDD, this should be a
# separate spindle than the data directories.
# If not set, the default directory is $CASSANDRA_HOME/data/commitlog.
commitlog_directory: /var/lib/cassandra/commitlog
# policy for data disk failures:
# die: shut down gossip and client transports and kill the JVM for any fs errors or
# single-sstable errors, so the node can be replaced.
# stop_paranoid: shut down gossip and client transports even for single-sstable errors,
# kill the JVM for errors during startup.
# stop: shut down gossip and client transports, leaving the node effectively dead, but
# can still be inspected via JMX, kill the JVM for errors during startup.
# best_effort: stop using the failed disk and respond to requests based on
# remaining available sstables. This means you WILL see obsolete
# data at CL.ONE!
# ignore: ignore fatal errors and let requests fail, as in pre-1.2 Cassandra
disk_failure_policy: stop
# policy for commit disk failures:
# die: shut down gossip and Thrift and kill the JVM, so the node can be replaced.
# stop: shut down gossip and Thrift, leaving the node effectively dead, but
# can still be inspected via JMX.
# stop_commit: shutdown the commit log, letting writes collect but
# continuing to service reads, as in pre-2.0.5 Cassandra
# ignore: ignore fatal errors and let the batches fail
commit_failure_policy: stop
# Maximum size of the key cache in memory.
#
# Each key cache hit saves 1 seek and each row cache hit saves 2 seeks at the
# minimum, sometimes more. The key cache is fairly tiny for the amount of
# time it saves, so it's worthwhile to use it at large numbers.
# The row cache saves even more time, but must contain the entire row,
# so it is extremely space-intensive. It's best to only use the
# row cache if you have hot rows or static rows.
#
# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup.
#
# Default value is empty to make it "auto" (min(5% of Heap (in MB), 100MB)). Set to 0 to disable key cache.
key_cache_size_in_mb:
# Duration in seconds after which Cassandra should
# save the key cache. Caches are saved to saved_caches_directory as
# specified in this configuration file.
#
# Saved caches greatly improve cold-start speeds, and is relatively cheap in
# terms of I/O for the key cache. Row cache saving is much more expensive and
# has limited use.
#
# Default is 14400 or 4 hours.
key_cache_save_period: 14400
# Number of keys from the key cache to save
# Disabled by default, meaning all keys are going to be saved
# key_cache_keys_to_save: 100
# Row cache implementation class name.
# Available implementations:
# org.apache.cassandra.cache.OHCProvider Fully off-heap row cache implementation (default).
# org.apache.cassandra.cache.SerializingCacheProvider This is the row cache implementation availabile
# in previous releases of Cassandra.
# row_cache_class_name: org.apache.cassandra.cache.OHCProvider
# Maximum size of the row cache in memory.
# Please note that OHC cache implementation requires some additional off-heap memory to manage
# the map structures and some in-flight memory during operations before/after cache entries can be
# accounted against the cache capacity. This overhead is usually small compared to the whole capacity.
# Do not specify more memory that the system can afford in the worst usual situation and leave some
# headroom for OS block level cache. Do never allow your system to swap.
#
# Default value is 0, to disable row caching.
row_cache_size_in_mb: 0
# Duration in seconds after which Cassandra should save the row cache.
# Caches are saved to saved_caches_directory as specified in this configuration file.
#
# Saved caches greatly improve cold-start speeds, and is relatively cheap in
# terms of I/O for the key cache. Row cache saving is much more expensive and
# has limited use.
#
# Default is 0 to disable saving the row cache.
row_cache_save_period: 0
# Number of keys from the row cache to save.
# Specify 0 (which is the default), meaning all keys are going to be saved
# row_cache_keys_to_save: 100
# Maximum size of the counter cache in memory.
#
# Counter cache helps to reduce counter locks' contention for hot counter cells.
# In case of RF = 1 a counter cache hit will cause Cassandra to skip the read before
# write entirely. With RF > 1 a counter cache hit will still help to reduce the duration
# of the lock hold, helping with hot counter cell updates, but will not allow skipping
# the read entirely. Only the local (clock, count) tuple of a counter cell is kept
# in memory, not the whole counter, so it's relatively cheap.
#
# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup.
#
# Default value is empty to make it "auto" (min(2.5% of Heap (in MB), 50MB)). Set to 0 to disable counter cache.
# NOTE: if you perform counter deletes and rely on low gcgs, you should disable the counter cache.
counter_cache_size_in_mb:
# Duration in seconds after which Cassandra should
# save the counter cache (keys only). Caches are saved to saved_caches_directory as
# specified in this configuration file.
#
# Default is 7200 or 2 hours.
counter_cache_save_period: 7200
# Number of keys from the counter cache to save
# Disabled by default, meaning all keys are going to be saved
# counter_cache_keys_to_save: 100
# saved caches
# If not set, the default directory is $CASSANDRA_HOME/data/saved_caches.
saved_caches_directory: /var/lib/cassandra/saved_caches
# commitlog_sync may be either "periodic" or "batch."
#
# When in batch mode, Cassandra won't ack writes until the commit log
# has been fsynced to disk. It will wait
# commitlog_sync_batch_window_in_ms milliseconds between fsyncs.
# This window should be kept short because the writer threads will
# be unable to do extra work while waiting. (You may need to increase
# concurrent_writes for the same reason.)
#
# commitlog_sync: batch
# commitlog_sync_batch_window_in_ms: 2
#
# the other option is "periodic" where writes may be acked immediately
# and the CommitLog is simply synced every commitlog_sync_period_in_ms
# milliseconds.
commitlog_sync: periodic
commitlog_sync_period_in_ms: 10000
# The size of the individual commitlog file segments. A commitlog
# segment may be archived, deleted, or recycled once all the data
# in it (potentially from each columnfamily in the system) has been
# flushed to sstables.
#
# The default size is 32, which is almost always fine, but if you are
# archiving commitlog segments (see commitlog_archiving.properties),
# then you probably want a finer granularity of archiving; 8 or 16 MB
# is reasonable.
commitlog_segment_size_in_mb: 32
# Compression to apply to the commit log. If omitted, the commit log
# will be written uncompressed. LZ4, Snappy, and Deflate compressors
# are supported.
#commitlog_compression:
# - class_name: LZ4Compressor
# parameters:
# -
# any class that implements the SeedProvider interface and has a
# constructor that takes a Map<String, String> of parameters will do.
seed_provider:
# Addresses of hosts that are deemed contact points.
# Cassandra nodes use this list of hosts to find each other and learn
# the topology of the ring. You must change this if you are running
# multiple nodes!
- class_name: org.apache.cassandra.locator.SimpleSeedProvider
parameters:
# seeds is actually a comma-delimited list of addresses.
# Ex: "<ip1>,<ip2>,<ip3>"
- seeds: "127.0.1.1"
# For workloads with more data than can fit in memory, Cassandra's
# bottleneck will be reads that need to fetch data from
# disk. "concurrent_reads" should be set to (16 * number_of_drives) in
# order to allow the operations to enqueue low enough in the stack
# that the OS and drives can reorder them. Same applies to
# "concurrent_counter_writes", since counter writes read the current
# values before incrementing and writing them back.
#
# On the other hand, since writes are almost never IO bound, the ideal
# number of "concurrent_writes" is dependent on the number of cores in
# your system; (8 * number_of_cores) is a good rule of thumb.
concurrent_reads: 32
concurrent_writes: 32
concurrent_counter_writes: 32
# Total memory to use for sstable-reading buffers. Defaults to
# the smaller of 1/4 of heap or 512MB.
# file_cache_size_in_mb: 512
# Total permitted memory to use for memtables. Cassandra will stop
# accepting writes when the limit is exceeded until a flush completes,
# and will trigger a flush based on memtable_cleanup_threshold
# If omitted, Cassandra will set both to 1/4 the size of the heap.
# memtable_heap_space_in_mb: 2048
# memtable_offheap_space_in_mb: 2048
# Ratio of occupied non-flushing memtable size to total permitted size
# that will trigger a flush of the largest memtable. Larger mct will
# mean larger flushes and hence less compaction, but also less concurrent
# flush activity which can make it difficult to keep your disks fed
# under heavy write load.
#
# memtable_cleanup_threshold defaults to 1 / (memtable_flush_writers + 1)
# memtable_cleanup_threshold: 0.11
# Specify the way Cassandra allocates and manages memtable memory.
# Options are:
# heap_buffers: on heap nio buffers
# offheap_buffers: off heap (direct) nio buffers
# offheap_objects: native memory, eliminating nio buffer heap overhead
memtable_allocation_type: heap_buffers
# Total space to use for commit logs on disk.
#
# If space gets above this value, Cassandra will flush every dirty CF
# in the oldest segment and remove it. So a small total commitlog space
# will tend to cause more flush activity on less-active columnfamilies.
#
# The default value is the smaller of 8192, and 1/4 of the total space
# of the commitlog volume.
#
# commitlog_total_space_in_mb: 8192
# This sets the amount of memtable flush writer threads. These will
# be blocked by disk io, and each one will hold a memtable in memory
# while blocked.
#
# memtable_flush_writers defaults to the smaller of (number of disks,
# number of cores), with a minimum of 2 and a maximum of 8.
#
# If your data directories are backed by SSD, you should increase this
# to the number of cores.
#memtable_flush_writers: 8
# A fixed memory pool size in MB for for SSTable index summaries. If left
# empty, this will default to 5% of the heap size. If the memory usage of
# all index summaries exceeds this limit, SSTables with low read rates will
# shrink their index summaries in order to meet this limit. However, this
# is a best-effort process. In extreme conditions Cassandra may need to use
# more than this amount of memory.
index_summary_capacity_in_mb:
# How frequently index summaries should be resampled. This is done
# periodically to redistribute memory from the fixed-size pool to sstables
# proportional their recent read rates. Setting to -1 will disable this
# process, leaving existing index summaries at their current sampling level.
index_summary_resize_interval_in_minutes: 60
# Whether to, when doing sequential writing, fsync() at intervals in
# order to force the operating system to flush the dirty
# buffers. Enable this to avoid sudden dirty buffer flushing from
# impacting read latencies. Almost always a good idea on SSDs; not
# necessarily on platters.
trickle_fsync: false
trickle_fsync_interval_in_kb: 10240
# TCP port, for commands and data
# For security reasons, you should not expose this port to the internet. Firewall it if needed.
storage_port: 7000
# SSL port, for encrypted communication. Unused unless enabled in
# encryption_options
# For security reasons, you should not expose this port to the internet. Firewall it if needed.
ssl_storage_port: 7001
# Address or interface to bind to and tell other Cassandra nodes to connect to.
# You _must_ change this if you want multiple nodes to be able to communicate!
#
# Set listen_address OR listen_interface, not both. Interfaces must correspond
# to a single address, IP aliasing is not supported.
#
# Leaving it blank leaves it up to InetAddress.getLocalHost(). This
# will always do the Right Thing _if_ the node is properly configured
# (hostname, name resolution, etc), and the Right Thing is to use the
# address associated with the hostname (it might not be).
#
# Setting listen_address to 0.0.0.0 is always wrong.
#
# If you choose to specify the interface by name and the interface has an ipv4 and an ipv6 address
# you can specify which should be chosen using listen_interface_prefer_ipv6. If false the first ipv4
# address will be used. If true the first ipv6 address will be used. Defaults to false preferring
# ipv4. If there is only one address it will be selected regardless of ipv4/ipv6.
listen_address: 127.0.1.1
# listen_interface: eth0
# listen_interface_prefer_ipv6: false
# Address to broadcast to other Cassandra nodes
# Leaving this blank will set it to the same value as listen_address
broadcast_address: 127.0.1.1
# When using multiple physical network interfaces, set this
# to true to listen on broadcast_address in addition to
# the listen_address, allowing nodes to communicate in both
# interfaces.
# Ignore this property if the network configuration automatically
# routes between the public and private networks such as EC2.
# listen_on_broadcast_address: false
# Internode authentication backend, implementing IInternodeAuthenticator;
# used to allow/disallow connections from peer nodes.
# internode_authenticator: org.apache.cassandra.auth.AllowAllInternodeAuthenticator
# Whether to start the native transport server.
# Please note that the address on which the native transport is bound is the
# same as the rpc_address. The port however is different and specified below.
start_native_transport: true
# port for the CQL native transport to listen for clients on
# For security reasons, you should not expose this port to the internet. Firewall it if needed.
native_transport_port: 9042
# The maximum threads for handling requests when the native transport is used.
# This is similar to rpc_max_threads though the default differs slightly (and
# there is no native_transport_min_threads, idle threads will always be stopped
# after 30 seconds).
# native_transport_max_threads: 128
#
# The maximum size of allowed frame. Frame (requests) larger than this will
# be rejected as invalid. The default is 256MB.
# native_transport_max_frame_size_in_mb: 256
# The maximum number of concurrent client connections.
# The default is -1, which means unlimited.
# native_transport_max_concurrent_connections: -1
# The maximum number of concurrent client connections per source ip.
# The default is -1, which means unlimited.
# native_transport_max_concurrent_connections_per_ip: -1
# Whether to start the thrift rpc server.
start_rpc: false
# The address or interface to bind the Thrift RPC service and native transport
# server to.
#
# Set rpc_address OR rpc_interface, not both. Interfaces must correspond
# to a single address, IP aliasing is not supported.
#
# Leaving rpc_address blank has the same effect as on listen_address
# (i.e. it will be based on the configured hostname of the node).
#
# Note that unlike listen_address, you can specify 0.0.0.0, but you must also
# set broadcast_rpc_address to a value other than 0.0.0.0.
#
# For security reasons, you should not expose this port to the internet. Firewall it if needed.
#
# If you choose to specify the interface by name and the interface has an ipv4 and an ipv6 address
# you can specify which should be chosen using rpc_interface_prefer_ipv6. If false the first ipv4
# address will be used. If true the first ipv6 address will be used. Defaults to false preferring
# ipv4. If there is only one address it will be selected regardless of ipv4/ipv6.
rpc_address: 0.0.0.0
# rpc_interface: eth1
# rpc_interface_prefer_ipv6: false
# port for Thrift to listen for clients on
rpc_port: 9160
# RPC address to broadcast to drivers and other Cassandra nodes. This cannot
# be set to 0.0.0.0. If left blank, this will be set to the value of
# rpc_address. If rpc_address is set to 0.0.0.0, broadcast_rpc_address must
# be set.
broadcast_rpc_address: 127.0.1.1
# enable or disable keepalive on rpc/native connections
rpc_keepalive: true
# Cassandra provides two out-of-the-box options for the RPC Server:
#
# sync -> One thread per thrift connection. For a very large number of clients, memory
# will be your limiting factor. On a 64 bit JVM, 180KB is the minimum stack size
# per thread, and that will correspond to your use of virtual memory (but physical memory
# may be limited depending on use of stack space).
#
# hsha -> Stands for "half synchronous, half asynchronous." All thrift clients are handled
# asynchronously using a small number of threads that does not vary with the amount
# of thrift clients (and thus scales well to many clients). The rpc requests are still
# synchronous (one thread per active request). If hsha is selected then it is essential
# that rpc_max_threads is changed from the default value of unlimited.
#
# The default is sync because on Windows hsha is about 30% slower. On Linux,
# sync/hsha performance is about the same, with hsha of course using less memory.
#
# Alternatively, can provide your own RPC server by providing the fully-qualified class name
# of an o.a.c.t.TServerFactory that can create an instance of it.
rpc_server_type: sync
# Uncomment rpc_min|max_thread to set request pool size limits.
#
# Regardless of your choice of RPC server (see above), the number of maximum requests in the
# RPC thread pool dictates how many concurrent requests are possible (but if you are using the sync
# RPC server, it also dictates the number of clients that can be connected at all).
#
# The default is unlimited and thus provides no protection against clients overwhelming the server. You are
# encouraged to set a maximum that makes sense for you in production, but do keep in mind that
# rpc_max_threads represents the maximum number of client requests this server may execute concurrently.
#
# rpc_min_threads: 16
# rpc_max_threads: 2048
# uncomment to set socket buffer sizes on rpc connections
# rpc_send_buff_size_in_bytes:
# rpc_recv_buff_size_in_bytes:
# Uncomment to set socket buffer size for internode communication
# Note that when setting this, the buffer size is limited by net.core.wmem_max
# and when not setting it it is defined by net.ipv4.tcp_wmem
# See:
# /proc/sys/net/core/wmem_max
# /proc/sys/net/core/rmem_max
# /proc/sys/net/ipv4/tcp_wmem
# /proc/sys/net/ipv4/tcp_wmem
# and: man tcp
# internode_send_buff_size_in_bytes:
# internode_recv_buff_size_in_bytes:
# Frame size for thrift (maximum message length).
thrift_framed_transport_size_in_mb: 15
# Set to true to have Cassandra create a hard link to each sstable
# flushed or streamed locally in a backups/ subdirectory of the
# keyspace data. Removing these links is the operator's
# responsibility.
incremental_backups: false
# Whether or not to take a snapshot before each compaction. Be
# careful using this option, since Cassandra won't clean up the
# snapshots for you. Mostly useful if you're paranoid when there
# is a data format change.
snapshot_before_compaction: false
# Whether or not a snapshot is taken of the data before keyspace truncation
# or dropping of column families. The STRONGLY advised default of true
# should be used to provide data safety. If you set this flag to false, you will
# lose data on truncation or drop.
auto_snapshot: true
# When executing a scan, within or across a partition, we need to keep the
# tombstones seen in memory so we can return them to the coordinator, which
# will use them to make sure other replicas also know about the deleted rows.
# With workloads that generate a lot of tombstones, this can cause performance
# problems and even exaust the server heap.
# (http://www.datastax.com/dev/blog/cassandra-anti-patterns-queues-and-queue-like-datasets)
# Adjust the thresholds here if you understand the dangers and want to
# scan more tombstones anyway. These thresholds may also be adjusted at runtime
# using the StorageService mbean.
tombstone_warn_threshold: 1000
tombstone_failure_threshold: 100000
# Granularity of the collation index of rows within a partition.
# Increase if your rows are large, or if you have a very large
# number of rows per partition. The competing goals are these:
# 1) a smaller granularity means more index entries are generated
# and looking up rows withing the partition by collation column
# is faster
# 2) but, Cassandra will keep the collation index in memory for hot
# rows (as part of the key cache), so a larger granularity means
# you can cache more hot rows
column_index_size_in_kb: 64
# Log WARN on any batch size exceeding this value. 5kb per batch by default.
# Caution should be taken on increasing the size of this threshold as it can lead to node instability.
batch_size_warn_threshold_in_kb: 5
# Fail any batch exceeding this value. 50kb (10x warn threshold) by default.
batch_size_fail_threshold_in_kb: 50
# Number of simultaneous compactions to allow, NOT including
# validation "compactions" for anti-entropy repair. Simultaneous
# compactions can help preserve read performance in a mixed read/write
# workload, by mitigating the tendency of small sstables to accumulate
# during a single long running compactions. The default is usually
# fine and if you experience problems with compaction running too
# slowly or too fast, you should look at
# compaction_throughput_mb_per_sec first.
#
# concurrent_compactors defaults to the smaller of (number of disks,
# number of cores), with a minimum of 2 and a maximum of 8.
#
# If your data directories are backed by SSD, you should increase this
# to the number of cores.
#concurrent_compactors: 1
# Throttles compaction to the given total throughput across the entire
# system. The faster you insert data, the faster you need to compact in
# order to keep the sstable count down, but in general, setting this to
# 16 to 32 times the rate you are inserting data is more than sufficient.
# Setting this to 0 disables throttling. Note that this account for all types
# of compaction, including validation compaction.
compaction_throughput_mb_per_sec: 16
# Log a warning when compacting partitions larger than this value
compaction_large_partition_warning_threshold_mb: 100
# When compacting, the replacement sstable(s) can be opened before they
# are completely written, and used in place of the prior sstables for
# any range that has been written. This helps to smoothly transfer reads
# between the sstables, reducing page cache churn and keeping hot rows hot
sstable_preemptive_open_interval_in_mb: 50
# Throttles all outbound streaming file transfers on this node to the
# given total throughput in Mbps. This is necessary because Cassandra does
# mostly sequential IO when streaming data during bootstrap or repair, which
# can lead to saturating the network connection and degrading rpc performance.
# When unset, the default is 200 Mbps or 25 MB/s.
# stream_throughput_outbound_megabits_per_sec: 200
# Throttles all streaming file transfer between the datacenters,
# this setting allows users to throttle inter dc stream throughput in addition
# to throttling all network stream traffic as configured with
# stream_throughput_outbound_megabits_per_sec
# When unset, the default is 200 Mbps or 25 MB/s
# inter_dc_stream_throughput_outbound_megabits_per_sec: 200
# How long the coordinator should wait for read operations to complete
read_request_timeout_in_ms: 5000
# How long the coordinator should wait for seq or index scans to complete
range_request_timeout_in_ms: 10000
# How long the coordinator should wait for writes to complete
write_request_timeout_in_ms: 2000
# How long the coordinator should wait for counter writes to complete
counter_write_request_timeout_in_ms: 5000
# How long a coordinator should continue to retry a CAS operation
# that contends with other proposals for the same row
cas_contention_timeout_in_ms: 1000
# How long the coordinator should wait for truncates to complete
# (This can be much longer, because unless auto_snapshot is disabled
# we need to flush first so we can snapshot before removing the data.)
truncate_request_timeout_in_ms: 60000
# The default timeout for other, miscellaneous operations
request_timeout_in_ms: 10000
# Enable operation timeout information exchange between nodes to accurately
# measure request timeouts. If disabled, replicas will assume that requests
# were forwarded to them instantly by the coordinator, which means that
# under overload conditions we will waste that much extra time processing
# already-timed-out requests.
#
# Warning: before enabling this property make sure to ntp is installed
# and the times are synchronized between the nodes.
cross_node_timeout: false
# Enable socket timeout for streaming operation.
# When a timeout occurs during streaming, streaming is retried from the start
# of the current file. This _can_ involve re-streaming an important amount of
# data, so you should avoid setting the value too low.
# Default value is 3600000, which means streams timeout after an hour.
# streaming_socket_timeout_in_ms: 3600000
# phi value that must be reached for a host to be marked down.
# most users should never need to adjust this.
# phi_convict_threshold: 8
# endpoint_snitch -- Set this to a class that implements
# IEndpointSnitch. The snitch has two functions:
# - it teaches Cassandra enough about your network topology to route
# requests efficiently
# - it allows Cassandra to spread replicas around your cluster to avoid
# correlated failures. It does this by grouping machines into
# "datacenters" and "racks." Cassandra will do its best not to have
# more than one replica on the same "rack" (which may not actually
# be a physical location)
#
# IF YOU CHANGE THE SNITCH AFTER DATA IS INSERTED INTO THE CLUSTER,
# YOU MUST RUN A FULL REPAIR, SINCE THE SNITCH AFFECTS WHERE REPLICAS
# ARE PLACED.
#
# IF THE RACK A REPLICA IS PLACED IN CHANGES AFTER THE REPLICA HAS BEEN
# ADDED TO A RING, THE NODE MUST BE DECOMMISSIONED AND REBOOTSTRAPPED.
#
# Out of the box, Cassandra provides
# - SimpleSnitch:
# Treats Strategy order as proximity. This can improve cache
# locality when disabling read repair. Only appropriate for
# single-datacenter deployments.
# - GossipingPropertyFileSnitch
# This should be your go-to snitch for production use. The rack
# and datacenter for the local node are defined in
# cassandra-rackdc.properties and propagated to other nodes via
# gossip. If cassandra-topology.properties exists, it is used as a
# fallback, allowing migration from the PropertyFileSnitch.
# - PropertyFileSnitch:
# Proximity is determined by rack and data center, which are
# explicitly configured in cassandra-topology.properties.
# - Ec2Snitch:
# Appropriate for EC2 deployments in a single Region. Loads Region
# and Availability Zone information from the EC2 API. The Region is
# treated as the datacenter, and the Availability Zone as the rack.
# Only private IPs are used, so this will not work across multiple
# Regions.
# - Ec2MultiRegionSnitch:
# Uses public IPs as broadcast_address to allow cross-region
# connectivity. (Thus, you should set seed addresses to the public
# IP as well.) You will need to open the storage_port or
# ssl_storage_port on the public IP firewall. (For intra-Region
# traffic, Cassandra will switch to the private IP after
# establishing a connection.)
# - RackInferringSnitch:
# Proximity is determined by rack and data center, which are
# assumed to correspond to the 3rd and 2nd octet of each node's IP
# address, respectively. Unless this happens to match your
# deployment conventions, this is best used as an example of
# writing a custom Snitch class and is provided in that spirit.
#
# You can use a custom Snitch by setting this to the full class name
# of the snitch, which will be assumed to be on your classpath.
endpoint_snitch: SimpleSnitch
# controls how often to perform the more expensive part of host score
# calculation
dynamic_snitch_update_interval_in_ms: 100
# controls how often to reset all host scores, allowing a bad host to
# possibly recover
dynamic_snitch_reset_interval_in_ms: 600000
# if set greater than zero and read_repair_chance is < 1.0, this will allow
# 'pinning' of replicas to hosts in order to increase cache capacity.
# The badness threshold will control how much worse the pinned host has to be
# before the dynamic snitch will prefer other replicas over it. This is
# expressed as a double which represents a percentage. Thus, a value of
# 0.2 means Cassandra would continue to prefer the static snitch values
# until the pinned host was 20% worse than the fastest.
dynamic_snitch_badness_threshold: 0.1
# request_scheduler -- Set this to a class that implements
# RequestScheduler, which will schedule incoming client requests
# according to the specific policy. This is useful for multi-tenancy
# with a single Cassandra cluster.
# NOTE: This is specifically for requests from the client and does
# not affect inter node communication.
# org.apache.cassandra.scheduler.NoScheduler - No scheduling takes place
# org.apache.cassandra.scheduler.RoundRobinScheduler - Round robin of
# client requests to a node with a separate queue for each
# request_scheduler_id. The scheduler is further customized by
# request_scheduler_options as described below.
request_scheduler: org.apache.cassandra.scheduler.NoScheduler
# Scheduler Options vary based on the type of scheduler
# NoScheduler - Has no options
# RoundRobin
# - throttle_limit -- The throttle_limit is the number of in-flight
# requests per client. Requests beyond
# that limit are queued up until
# running requests can complete.
# The value of 80 here is twice the number of
# concurrent_reads + concurrent_writes.
# - default_weight -- default_weight is optional and allows for
# overriding the default which is 1.
# - weights -- Weights are optional and will default to 1 or the
# overridden default_weight. The weight translates into how
# many requests are handled during each turn of the
# RoundRobin, based on the scheduler id.
#
# request_scheduler_options:
# throttle_limit: 80
# default_weight: 5
# weights:
# Keyspace1: 1
# Keyspace2: 5
# request_scheduler_id -- An identifier based on which to perform
# the request scheduling. Currently the only valid option is keyspace.
# request_scheduler_id: keyspace
# Enable or disable inter-node encryption
# Default settings are TLS v1, RSA 1024-bit keys (it is imperative that
# users generate their own keys) TLS_RSA_WITH_AES_128_CBC_SHA as the cipher
# suite for authentication, key exchange and encryption of the actual data transfers.
# Use the DHE/ECDHE ciphers if running in FIPS 140 compliant mode.
# NOTE: No custom encryption options are enabled at the moment
# The available internode options are : all, none, dc, rack
#
# If set to dc cassandra will encrypt the traffic between the DCs
# If set to rack cassandra will encrypt the traffic between the racks
#
# The passwords used in these options must match the passwords used when generating
# the keystore and truststore. For instructions on generating these files, see:
# http://download.oracle.com/javase/6/docs/technotes/guides/security/jsse/JSSERefGuide.html#CreateKeystore
#
server_encryption_options:
internode_encryption: none
keystore: conf/.keystore
keystore_password: cassandra
truststore: conf/.truststore
truststore_password: cassandra
# More advanced defaults below:
# protocol: TLS
# algorithm: SunX509
# store_type: JKS
# cipher_suites: [TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA]
# require_client_auth: false
# enable or disable client/server encryption.
client_encryption_options:
enabled: false
# If enabled and optional is set to true encrypted and unencrypted connections are handled.
optional: false
keystore: conf/.keystore
keystore_password: cassandra
# require_client_auth: false
# Set trustore and truststore_password if require_client_auth is true
# truststore: conf/.truststore
# truststore_password: cassandra
# More advanced defaults below:
# protocol: TLS
# algorithm: SunX509
# store_type: JKS
# cipher_suites: [TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA]
# internode_compression controls whether traffic between nodes is
# compressed.
# can be: all - all traffic is compressed
# dc - traffic between different datacenters is compressed
# none - nothing is compressed.
internode_compression: all
# Enable or disable tcp_nodelay for inter-dc communication.
# Disabling it will result in larger (but fewer) network packets being sent,
# reducing overhead from the TCP protocol itself, at the cost of increasing
# latency if you block for cross-datacenter responses.
inter_dc_tcp_nodelay: false
# TTL for different trace types used during logging of the repair process.
tracetype_query_ttl: 86400
tracetype_repair_ttl: 604800
# GC Pauses greater than gc_warn_threshold_in_ms will be logged at WARN level
# Adjust the threshold based on your application throughput requirement
# By default, Cassandra logs GC Pauses greater than 200 ms at INFO level
# gc_warn_threshold_in_ms: 1000
# UDFs (user defined functions) are disabled by default.
# As of Cassandra 2.2, there is no security manager or anything else in place that
# prevents execution of evil code. CASSANDRA-9402 will fix this issue for Cassandra 3.0.
# This will inherently be backwards-incompatible with any 2.2 UDF that perform insecure
# operations such as opening a socket or writing to the filesystem.
enable_user_defined_functions: false
# The default Windows kernel timer and scheduling resolution is 15.6ms for power conservation.
# Lowering this value on Windows can provide much tighter latency and better throughput, however
# some virtualized environments may see a negative performance impact from changing this setting
# below their system default. The sysinternals 'clockres' tool can confirm your system's default
# setting.
windows_timer_interval: 1
Raw
cassandra33.yaml
# Cassandra storage config YAML
# NOTE:
# See http://wiki.apache.org/cassandra/StorageConfiguration for
# full explanations of configuration directives
# /NOTE
# The name of the cluster. This is mainly used to prevent machines in
# one logical cluster from joining another.
cluster_name: 'Test Cluster'
# This defines the number of tokens randomly assigned to this node on the ring
# The more tokens, relative to other nodes, the larger the proportion of data
# that this node will store. You probably want all nodes to have the same number
# of tokens assuming they have equal hardware capability.
#
# If you leave this unspecified, Cassandra will use the default of 1 token for legacy compatibility,
# and will use the initial_token as described below.
#
# Specifying initial_token will override this setting on the node's initial start,
# on subsequent starts, this setting will apply even if initial token is set.
#
# If you already have a cluster with 1 token per node, and wish to migrate to
# multiple tokens per node, see http://wiki.apache.org/cassandra/Operations
num_tokens: 256
# Triggers automatic allocation of num_tokens tokens for this node. The allocation
# algorithm attempts to choose tokens in a way that optimizes replicated load over
# the nodes in the datacenter for the replication strategy used by the specified
# keyspace.
#
# The load assigned to each node will be close to proportional to its number of
# vnodes.
#
# Only supported with the Murmur3Partitioner.
# allocate_tokens_for_keyspace: KEYSPACE
# initial_token allows you to specify tokens manually. While you can use # it with
# vnodes (num_tokens > 1, above) -- in which case you should provide a
# comma-separated list -- it's primarily used when adding nodes # to legacy clusters
# that do not have vnodes enabled.
# initial_token:
# See http://wiki.apache.org/cassandra/HintedHandoff
# May either be "true" or "false" to enable globally
hinted_handoff_enabled: true
# When hinted_handoff_enabled is true, a black list of data centers that will not
# perform hinted handoff
#hinted_handoff_disabled_datacenters:
# - DC1
# - DC2
# this defines the maximum amount of time a dead host will have hints
# generated. After it has been dead this long, new hints for it will not be
# created until it has been seen alive and gone down again.
max_hint_window_in_ms: 10800000 # 3 hours
# Maximum throttle in KBs per second, per delivery thread. This will be
# reduced proportionally to the number of nodes in the cluster. (If there
# are two nodes in the cluster, each delivery thread will use the maximum
# rate; if there are three, each will throttle to half of the maximum,
# since we expect two nodes to be delivering hints simultaneously.)
hinted_handoff_throttle_in_kb: 1024
# Number of threads with which to deliver hints;
# Consider increasing this number when you have multi-dc deployments, since
# cross-dc handoff tends to be slower
max_hints_delivery_threads: 2
# Directory where Cassandra should store hints.
# If not set, the default directory is $CASSANDRA_HOME/data/hints.
# hints_directory: /var/lib/cassandra/hints
# How often hints should be flushed from the internal buffers to disk.
# Will *not* trigger fsync.
hints_flush_period_in_ms: 10000
# Maximum size for a single hints file, in megabytes.
max_hints_file_size_in_mb: 128
# Compression to apply to the hint files. If omitted, hints files
# will be written uncompressed. LZ4, Snappy, and Deflate compressors
# are supported.
#hints_compression:
# - class_name: LZ4Compressor
# parameters:
# -
# Maximum throttle in KBs per second, total. This will be
# reduced proportionally to the number of nodes in the cluster.
batchlog_replay_throttle_in_kb: 1024
# Authentication backend, implementing IAuthenticator; used to identify users
# Out of the box, Cassandra provides org.apache.cassandra.auth.{AllowAllAuthenticator,
# PasswordAuthenticator}.
#
# - AllowAllAuthenticator performs no checks - set it to disable authentication.
# - PasswordAuthenticator relies on username/password pairs to authenticate
# users. It keeps usernames and hashed passwords in system_auth.credentials table.
# Please increase system_auth keyspace replication factor if you use this authenticator.
# If using PasswordAuthenticator, CassandraRoleManager must also be used (see below)
authenticator: AllowAllAuthenticator
# Authorization backend, implementing IAuthorizer; used to limit access/provide permissions
# Out of the box, Cassandra provides org.apache.cassandra.auth.{AllowAllAuthorizer,
# CassandraAuthorizer}.
#
# - AllowAllAuthorizer allows any action to any user - set it to disable authorization.
# - CassandraAuthorizer stores permissions in system_auth.permissions table. Please
# increase system_auth keyspace replication factor if you use this authorizer.
authorizer: AllowAllAuthorizer
# Part of the Authentication & Authorization backend, implementing IRoleManager; used
# to maintain grants and memberships between roles.
# Out of the box, Cassandra provides org.apache.cassandra.auth.CassandraRoleManager,
# which stores role information in the system_auth keyspace. Most functions of the
# IRoleManager require an authenticated login, so unless the configured IAuthenticator
# actually implements authentication, most of this functionality will be unavailable.
#
# - CassandraRoleManager stores role data in the system_auth keyspace. Please
# increase system_auth keyspace replication factor if you use this role manager.
role_manager: CassandraRoleManager
# Validity period for roles cache (fetching permissions can be an
# expensive operation depending on the authorizer). Granted roles are cached for
# authenticated sessions in AuthenticatedUser and after the period specified
# here, become eligible for (async) reload.
# Defaults to 2000, set to 0 to disable.
# Will be disabled automatically for AllowAllAuthenticator.
roles_validity_in_ms: 2000
# Refresh interval for roles cache (if enabled).
# After this interval, cache entries become eligible for refresh. Upon next
# access, an async reload is scheduled and the old value returned until it
# completes. If roles_validity_in_ms is non-zero, then this must be
# also.
# Defaults to the same value as roles_validity_in_ms.
# roles_update_interval_in_ms: 1000
# Validity period for permissions cache (fetching permissions can be an
# expensive operation depending on the authorizer, CassandraAuthorizer is
# one example). Defaults to 2000, set to 0 to disable.
# Will be disabled automatically for AllowAllAuthorizer.
permissions_validity_in_ms: 2000
# Refresh interval for permissions cache (if enabled).
# After this interval, cache entries become eligible for refresh. Upon next
# access, an async reload is scheduled and the old value returned until it
# completes. If permissions_validity_in_ms is non-zero, then this must be
# also.
# Defaults to the same value as permissions_validity_in_ms.
# permissions_update_interval_in_ms: 1000
# The partitioner is responsible for distributing groups of rows (by
# partition key) across nodes in the cluster. You should leave this
# alone for new clusters. The partitioner can NOT be changed without
# reloading all data, so when upgrading you should set this to the
# same partitioner you were already using.
#
# Besides Murmur3Partitioner, partitioners included for backwards
# compatibility include RandomPartitioner, ByteOrderedPartitioner, and
# OrderPreservingPartitioner.
#
partitioner: org.apache.cassandra.dht.Murmur3Partitioner
# Directories where Cassandra should store data on disk. Cassandra
# will spread data evenly across them, subject to the granularity of
# the configured compaction strategy.
# If not set, the default directory is $CASSANDRA_HOME/data/data.
data_file_directories:
- /var/lib/cassandra/data
# commit log. when running on magnetic HDD, this should be a
# separate spindle than the data directories.
# If not set, the default directory is $CASSANDRA_HOME/data/commitlog.
commitlog_directory: /var/lib/cassandra/commitlog
# policy for data disk failures:
# die: shut down gossip and client transports and kill the JVM for any fs errors or
# single-sstable errors, so the node can be replaced.
# stop_paranoid: shut down gossip and client transports even for single-sstable errors,
# kill the JVM for errors during startup.
# stop: shut down gossip and client transports, leaving the node effectively dead, but
# can still be inspected via JMX, kill the JVM for errors during startup.
# best_effort: stop using the failed disk and respond to requests based on
# remaining available sstables. This means you WILL see obsolete
# data at CL.ONE!
# ignore: ignore fatal errors and let requests fail, as in pre-1.2 Cassandra
disk_failure_policy: stop
# policy for commit disk failures:
# die: shut down gossip and Thrift and kill the JVM, so the node can be replaced.
# stop: shut down gossip and Thrift, leaving the node effectively dead, but
# can still be inspected via JMX.
# stop_commit: shutdown the commit log, letting writes collect but
# continuing to service reads, as in pre-2.0.5 Cassandra
# ignore: ignore fatal errors and let the batches fail
commit_failure_policy: stop
# Maximum size of the key cache in memory.
#
# Each key cache hit saves 1 seek and each row cache hit saves 2 seeks at the
# minimum, sometimes more. The key cache is fairly tiny for the amount of
# time it saves, so it's worthwhile to use it at large numbers.
# The row cache saves even more time, but must contain the entire row,
# so it is extremely space-intensive. It's best to only use the
# row cache if you have hot rows or static rows.
#
# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup.
#
# Default value is empty to make it "auto" (min(5% of Heap (in MB), 100MB)). Set to 0 to disable key cache.
key_cache_size_in_mb:
# Duration in seconds after which Cassandra should
# save the key cache. Caches are saved to saved_caches_directory as
# specified in this configuration file.
#
# Saved caches greatly improve cold-start speeds, and is relatively cheap in
# terms of I/O for the key cache. Row cache saving is much more expensive and
# has limited use.
#
# Default is 14400 or 4 hours.
key_cache_save_period: 14400
# Number of keys from the key cache to save
# Disabled by default, meaning all keys are going to be saved
# key_cache_keys_to_save: 100
# Row cache implementation class name.
# Available implementations:
# org.apache.cassandra.cache.OHCProvider Fully off-heap row cache implementation (default).
# org.apache.cassandra.cache.SerializingCacheProvider This is the row cache implementation availabile
# in previous releases of Cassandra.
# row_cache_class_name: org.apache.cassandra.cache.OHCProvider
# Maximum size of the row cache in memory.
# Please note that OHC cache implementation requires some additional off-heap memory to manage
# the map structures and some in-flight memory during operations before/after cache entries can be
# accounted against the cache capacity. This overhead is usually small compared to the whole capacity.
# Do not specify more memory that the system can afford in the worst usual situation and leave some
# headroom for OS block level cache. Do never allow your system to swap.
#
# Default value is 0, to disable row caching.
row_cache_size_in_mb: 0
# Duration in seconds after which Cassandra should save the row cache.
# Caches are saved to saved_caches_directory as specified in this configuration file.
#
# Saved caches greatly improve cold-start speeds, and is relatively cheap in
# terms of I/O for the key cache. Row cache saving is much more expensive and
# has limited use.
#
# Default is 0 to disable saving the row cache.
row_cache_save_period: 0
# Number of keys from the row cache to save.
# Specify 0 (which is the default), meaning all keys are going to be saved
# row_cache_keys_to_save: 100
# Maximum size of the counter cache in memory.
#
# Counter cache helps to reduce counter locks' contention for hot counter cells.
# In case of RF = 1 a counter cache hit will cause Cassandra to skip the read before
# write entirely. With RF > 1 a counter cache hit will still help to reduce the duration
# of the lock hold, helping with hot counter cell updates, but will not allow skipping
# the read entirely. Only the local (clock, count) tuple of a counter cell is kept
# in memory, not the whole counter, so it's relatively cheap.
#
# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup.
#
# Default value is empty to make it "auto" (min(2.5% of Heap (in MB), 50MB)). Set to 0 to disable counter cache.
# NOTE: if you perform counter deletes and rely on low gcgs, you should disable the counter cache.
counter_cache_size_in_mb:
# Duration in seconds after which Cassandra should
# save the counter cache (keys only). Caches are saved to saved_caches_directory as
# specified in this configuration file.
#
# Default is 7200 or 2 hours.
counter_cache_save_period: 7200
# Number of keys from the counter cache to save
# Disabled by default, meaning all keys are going to be saved
# counter_cache_keys_to_save: 100
# saved caches
# If not set, the default directory is $CASSANDRA_HOME/data/saved_caches.
saved_caches_directory: /var/lib/cassandra/saved_caches
# commitlog_sync may be either "periodic" or "batch."
#
# When in batch mode, Cassandra won't ack writes until the commit log
# has been fsynced to disk. It will wait
# commitlog_sync_batch_window_in_ms milliseconds between fsyncs.
# This window should be kept short because the writer threads will
# be unable to do extra work while waiting. (You may need to increase
# concurrent_writes for the same reason.)
#
# commitlog_sync: batch
# commitlog_sync_batch_window_in_ms: 2
#
# the other option is "periodic" where writes may be acked immediately
# and the CommitLog is simply synced every commitlog_sync_period_in_ms
# milliseconds.
commitlog_sync: periodic
commitlog_sync_period_in_ms: 10000
# The size of the individual commitlog file segments. A commitlog
# segment may be archived, deleted, or recycled once all the data
# in it (potentially from each columnfamily in the system) has been
# flushed to sstables.
#
# The default size is 32, which is almost always fine, but if you are
# archiving commitlog segments (see commitlog_archiving.properties),
# then you probably want a finer granularity of archiving; 8 or 16 MB
# is reasonable.
# Max mutation size is also configurable via max_mutation_size_in_kb setting in
# cassandra.yaml. The default is half the size commitlog_segment_size_in_mb * 1024.
#
# NOTE: If max_mutation_size_in_kb is set explicitly then commitlog_segment_size_in_mb must
# be set to at least twice the size of max_mutation_size_in_kb / 1024
#
commitlog_segment_size_in_mb: 32
# Compression to apply to the commit log. If omitted, the commit log
# will be written uncompressed. LZ4, Snappy, and Deflate compressors
# are supported.
#commitlog_compression:
# - class_name: LZ4Compressor
# parameters:
# -
# any class that implements the SeedProvider interface and has a
# constructor that takes a Map<String, String> of parameters will do.
seed_provider:
# Addresses of hosts that are deemed contact points.
# Cassandra nodes use this list of hosts to find each other and learn
# the topology of the ring. You must change this if you are running
# multiple nodes!
- class_name: org.apache.cassandra.locator.SimpleSeedProvider
parameters:
# seeds is actually a comma-delimited list of addresses.
# Ex: "<ip1>,<ip2>,<ip3>"
- seeds: "127.0.1.1"
# For workloads with more data than can fit in memory, Cassandra's
# bottleneck will be reads that need to fetch data from
# disk. "concurrent_reads" should be set to (16 * number_of_drives) in
# order to allow the operations to enqueue low enough in the stack
# that the OS and drives can reorder them. Same applies to
# "concurrent_counter_writes", since counter writes read the current
# values before incrementing and writing them back.
#
# On the other hand, since writes are almost never IO bound, the ideal
# number of "concurrent_writes" is dependent on the number of cores in
# your system; (8 * number_of_cores) is a good rule of thumb.
concurrent_reads: 32
concurrent_writes: 32
concurrent_counter_writes: 32
# For materialized view writes, as there is a read involved, so this should
# be limited by the less of concurrent reads or concurrent writes.
concurrent_materialized_view_writes: 32
# Maximum memory to use for pooling sstable buffers. Defaults to the smaller
# of 1/4 of heap or 512MB. This pool is allocated off-heap, so is in addition
# to the memory allocated for heap. Memory is only allocated as needed.
# file_cache_size_in_mb: 512
# Flag indicating whether to allocate on or off heap when the sstable buffer
# pool is exhausted, that is when it has exceeded the maximum memory
# file_cache_size_in_mb, beyond which it will not cache buffers but allocate on request.
# buffer_pool_use_heap_if_exhausted: true
# The strategy for optimizing disk read
# Possible values are:
# ssd (for solid state disks, the default)
# spinning (for spinning disks)
# disk_optimization_strategy: ssd
# Total permitted memory to use for memtables. Cassandra will stop
# accepting writes when the limit is exceeded until a flush completes,
# and will trigger a flush based on memtable_cleanup_threshold
# If omitted, Cassandra will set both to 1/4 the size of the heap.
# memtable_heap_space_in_mb: 2048
# memtable_offheap_space_in_mb: 2048
# Ratio of occupied non-flushing memtable size to total permitted size
# that will trigger a flush of the largest memtable. Larger mct will
# mean larger flushes and hence less compaction, but also less concurrent
# flush activity which can make it difficult to keep your disks fed
# under heavy write load.
#
# memtable_cleanup_threshold defaults to 1 / (memtable_flush_writers + 1)
# memtable_cleanup_threshold: 0.11
# Specify the way Cassandra allocates and manages memtable memory.
# Options are:
# heap_buffers: on heap nio buffers
# offheap_buffers: off heap (direct) nio buffers
memtable_allocation_type: heap_buffers
# Total space to use for commit logs on disk.
#
# If space gets above this value, Cassandra will flush every dirty CF
# in the oldest segment and remove it. So a small total commitlog space
# will tend to cause more flush activity on less-active columnfamilies.
#
# The default value is the smaller of 8192, and 1/4 of the total space
# of the commitlog volume.
#
# commitlog_total_space_in_mb: 8192
# This sets the amount of memtable flush writer threads. These will
# be blocked by disk io, and each one will hold a memtable in memory
# while blocked.
#
# memtable_flush_writers defaults to one per data_file_directory.
#
# If your data directories are backed by SSD, you can increase this, but
# avoid having memtable_flush_writers * data_file_directories > number of cores
#memtable_flush_writers: 1
# A fixed memory pool size in MB for for SSTable index summaries. If left
# empty, this will default to 5% of the heap size. If the memory usage of
# all index summaries exceeds this limit, SSTables with low read rates will
# shrink their index summaries in order to meet this limit. However, this
# is a best-effort process. In extreme conditions Cassandra may need to use
# more than this amount of memory.
index_summary_capacity_in_mb:
# How frequently index summaries should be resampled. This is done
# periodically to redistribute memory from the fixed-size pool to sstables
# proportional their recent read rates. Setting to -1 will disable this
# process, leaving existing index summaries at their current sampling level.
index_summary_resize_interval_in_minutes: 60
# Whether to, when doing sequential writing, fsync() at intervals in
# order to force the operating system to flush the dirty
# buffers. Enable this to avoid sudden dirty buffer flushing from
# impacting read latencies. Almost always a good idea on SSDs; not
# necessarily on platters.
trickle_fsync: false
trickle_fsync_interval_in_kb: 10240
# TCP port, for commands and data
# For security reasons, you should not expose this port to the internet. Firewall it if needed.
storage_port: 7000
# SSL port, for encrypted communication. Unused unless enabled in
# encryption_options
# For security reasons, you should not expose this port to the internet. Firewall it if needed.
ssl_storage_port: 7001
# Address or interface to bind to and tell other Cassandra nodes to connect to.
# You _must_ change this if you want multiple nodes to be able to communicate!
#
# Set listen_address OR listen_interface, not both. Interfaces must correspond
# to a single address, IP aliasing is not supported.
#
# Leaving it blank leaves it up to InetAddress.getLocalHost(). This
# will always do the Right Thing _if_ the node is properly configured
# (hostname, name resolution, etc), and the Right Thing is to use the
# address associated with the hostname (it might not be).
#
# Setting listen_address to 0.0.0.0 is always wrong.
#
# If you choose to specify the interface by name and the interface has an ipv4 and an ipv6 address
# you can specify which should be chosen using listen_interface_prefer_ipv6. If false the first ipv4
# address will be used. If true the first ipv6 address will be used. Defaults to false preferring
# ipv4. If there is only one address it will be selected regardless of ipv4/ipv6.
listen_address: 127.0.1.1
# listen_interface: eth0
# listen_interface_prefer_ipv6: false
# Address to broadcast to other Cassandra nodes
# Leaving this blank will set it to the same value as listen_address
broadcast_address: 127.0.1.1
# When using multiple physical network interfaces, set this
# to true to listen on broadcast_address in addition to
# the listen_address, allowing nodes to communicate in both
# interfaces.
# Ignore this property if the network configuration automatically
# routes between the public and private networks such as EC2.
# listen_on_broadcast_address: false
# Internode authentication backend, implementing IInternodeAuthenticator;
# used to allow/disallow connections from peer nodes.
# internode_authenticator: org.apache.cassandra.auth.AllowAllInternodeAuthenticator
# Whether to start the native transport server.
# Please note that the address on which the native transport is bound is the
# same as the rpc_address. The port however is different and specified below.
start_native_transport: true
# port for the CQL native transport to listen for clients on
# For security reasons, you should not expose this port to the internet. Firewall it if needed.
native_transport_port: 9042
# Enabling native transport encryption in client_encryption_options allows you to either use
# encryption for the standard port or to use a dedicated, additional port along with the unencrypted
# standard native_transport_port.
# Enabling client encryption and keeping native_transport_port_ssl disabled will use encryption
# for native_transport_port. Setting native_transport_port_ssl to a different value
# from native_transport_port will use encryption for native_transport_port_ssl while
# keeping native_transport_port unencrypted.
# native_transport_port_ssl: 9142
# The maximum threads for handling requests when the native transport is used.
# This is similar to rpc_max_threads though the default differs slightly (and
# there is no native_transport_min_threads, idle threads will always be stopped
# after 30 seconds).
# native_transport_max_threads: 128
#
# The maximum size of allowed frame. Frame (requests) larger than this will
# be rejected as invalid. The default is 256MB.
# native_transport_max_frame_size_in_mb: 256
# The maximum number of concurrent client connections.
# The default is -1, which means unlimited.
# native_transport_max_concurrent_connections: -1
# The maximum number of concurrent client connections per source ip.
# The default is -1, which means unlimited.
# native_transport_max_concurrent_connections_per_ip: -1
# Whether to start the thrift rpc server.
start_rpc: false
# The address or interface to bind the Thrift RPC service and native transport
# server to.
#
# Set rpc_address OR rpc_interface, not both. Interfaces must correspond
# to a single address, IP aliasing is not supported.
#
# Leaving rpc_address blank has the same effect as on listen_address
# (i.e. it will be based on the configured hostname of the node).
#
# Note that unlike listen_address, you can specify 0.0.0.0, but you must also
# set broadcast_rpc_address to a value other than 0.0.0.0.
#
# For security reasons, you should not expose this port to the internet. Firewall it if needed.
#
# If you choose to specify the interface by name and the interface has an ipv4 and an ipv6 address
# you can specify which should be chosen using rpc_interface_prefer_ipv6. If false the first ipv4
# address will be used. If true the first ipv6 address will be used. Defaults to false preferring
# ipv4. If there is only one address it will be selected regardless of ipv4/ipv6.
rpc_address: 0.0.0.0
# rpc_interface: eth1
# rpc_interface_prefer_ipv6: false
# port for Thrift to listen for clients on
rpc_port: 9160
# RPC address to broadcast to drivers and other Cassandra nodes. This cannot
# be set to 0.0.0.0. If left blank, this will be set to the value of
# rpc_address. If rpc_address is set to 0.0.0.0, broadcast_rpc_address must
# be set.
broadcast_rpc_address: 127.0.1.1
# enable or disable keepalive on rpc/native connections
rpc_keepalive: true
# Cassandra provides two out-of-the-box options for the RPC Server:
#
# sync -> One thread per thrift connection. For a very large number of clients, memory
# will be your limiting factor. On a 64 bit JVM, 180KB is the minimum stack size
# per thread, and that will correspond to your use of virtual memory (but physical memory
# may be limited depending on use of stack space).
#
# hsha -> Stands for "half synchronous, half asynchronous." All thrift clients are handled
# asynchronously using a small number of threads that does not vary with the amount
# of thrift clients (and thus scales well to many clients). The rpc requests are still
# synchronous (one thread per active request). If hsha is selected then it is essential
# that rpc_max_threads is changed from the default value of unlimited.
#
# The default is sync because on Windows hsha is about 30% slower. On Linux,
# sync/hsha performance is about the same, with hsha of course using less memory.
#
# Alternatively, can provide your own RPC server by providing the fully-qualified class name
# of an o.a.c.t.TServerFactory that can create an instance of it.
rpc_server_type: sync
# Uncomment rpc_min|max_thread to set request pool size limits.
#
# Regardless of your choice of RPC server (see above), the number of maximum requests in the
# RPC thread pool dictates how many concurrent requests are possible (but if you are using the sync
# RPC server, it also dictates the number of clients that can be connected at all).
#
# The default is unlimited and thus provides no protection against clients overwhelming the server. You are
# encouraged to set a maximum that makes sense for you in production, but do keep in mind that
# rpc_max_threads represents the maximum number of client requests this server may execute concurrently.
#
# rpc_min_threads: 16
# rpc_max_threads: 2048
# uncomment to set socket buffer sizes on rpc connections
# rpc_send_buff_size_in_bytes:
# rpc_recv_buff_size_in_bytes:
# Uncomment to set socket buffer size for internode communication
# Note that when setting this, the buffer size is limited by net.core.wmem_max
# and when not setting it it is defined by net.ipv4.tcp_wmem
# See:
# /proc/sys/net/core/wmem_max
# /proc/sys/net/core/rmem_max
# /proc/sys/net/ipv4/tcp_wmem
# /proc/sys/net/ipv4/tcp_wmem
# and: man tcp
# internode_send_buff_size_in_bytes:
# internode_recv_buff_size_in_bytes:
# Frame size for thrift (maximum message length).
thrift_framed_transport_size_in_mb: 15
# Set to true to have Cassandra create a hard link to each sstable
# flushed or streamed locally in a backups/ subdirectory of the
# keyspace data. Removing these links is the operator's
# responsibility.
incremental_backups: false
# Whether or not to take a snapshot before each compaction. Be
# careful using this option, since Cassandra won't clean up the
# snapshots for you. Mostly useful if you're paranoid when there
# is a data format change.
snapshot_before_compaction: false
# Whether or not a snapshot is taken of the data before keyspace truncation
# or dropping of column families. The STRONGLY advised default of true
# should be used to provide data safety. If you set this flag to false, you will
# lose data on truncation or drop.
auto_snapshot: true
# When executing a scan, within or across a partition, we need to keep the
# tombstones seen in memory so we can return them to the coordinator, which
# will use them to make sure other replicas also know about the deleted rows.
# With workloads that generate a lot of tombstones, this can cause performance
# problems and even exaust the server heap.
# (http://www.datastax.com/dev/blog/cassandra-anti-patterns-queues-and-queue-like-datasets)
# Adjust the thresholds here if you understand the dangers and want to
# scan more tombstones anyway. These thresholds may also be adjusted at runtime
# using the StorageService mbean.
tombstone_warn_threshold: 1000
tombstone_failure_threshold: 100000
# Granularity of the collation index of rows within a partition.
# Increase if your rows are large, or if you have a very large
# number of rows per partition. The competing goals are these:
# 1) a smaller granularity means more index entries are generated
# and looking up rows withing the partition by collation column
# is faster
# 2) but, Cassandra will keep the collation index in memory for hot
# rows (as part of the key cache), so a larger granularity means
# you can cache more hot rows
column_index_size_in_kb: 64
# Log WARN on any batch size exceeding this value. 5kb per batch by default.
# Caution should be taken on increasing the size of this threshold as it can lead to node instability.
batch_size_warn_threshold_in_kb: 5
# Fail any batch exceeding this value. 50kb (10x warn threshold) by default.
batch_size_fail_threshold_in_kb: 50
# Number of simultaneous compactions to allow, NOT including
# validation "compactions" for anti-entropy repair. Simultaneous
# compactions can help preserve read performance in a mixed read/write
# workload, by mitigating the tendency of small sstables to accumulate
# during a single long running compactions. The default is usually
# fine and if you experience problems with compaction running too
# slowly or too fast, you should look at
# compaction_throughput_mb_per_sec first.
#
# concurrent_compactors defaults to the smaller of (number of disks,
# number of cores), with a minimum of 2 and a maximum of 8.
#
# If your data directories are backed by SSD, you should increase this
# to the number of cores.
#concurrent_compactors: 1
# Throttles compaction to the given total throughput across the entire
# system. The faster you insert data, the faster you need to compact in
# order to keep the sstable count down, but in general, setting this to
# 16 to 32 times the rate you are inserting data is more than sufficient.
# Setting this to 0 disables throttling. Note that this account for all types
# of compaction, including validation compaction.
compaction_throughput_mb_per_sec: 16
# Log a warning when compacting partitions larger than this value
compaction_large_partition_warning_threshold_mb: 100
# When compacting, the replacement sstable(s) can be opened before they
# are completely written, and used in place of the prior sstables for
# any range that has been written. This helps to smoothly transfer reads
# between the sstables, reducing page cache churn and keeping hot rows hot
sstable_preemptive_open_interval_in_mb: 50
# Throttles all outbound streaming file transfers on this node to the
# given total throughput in Mbps. This is necessary because Cassandra does
# mostly sequential IO when streaming data during bootstrap or repair, which
# can lead to saturating the network connection and degrading rpc performance.
# When unset, the default is 200 Mbps or 25 MB/s.
# stream_throughput_outbound_megabits_per_sec: 200
# Throttles all streaming file transfer between the datacenters,
# this setting allows users to throttle inter dc stream throughput in addition
# to throttling all network stream traffic as configured with
# stream_throughput_outbound_megabits_per_sec
# When unset, the default is 200 Mbps or 25 MB/s
# inter_dc_stream_throughput_outbound_megabits_per_sec: 200
# How long the coordinator should wait for read operations to complete
read_request_timeout_in_ms: 5000
# How long the coordinator should wait for seq or index scans to complete
range_request_timeout_in_ms: 10000
# How long the coordinator should wait for writes to complete
write_request_timeout_in_ms: 2000
# How long the coordinator should wait for counter writes to complete
counter_write_request_timeout_in_ms: 5000
# How long a coordinator should continue to retry a CAS operation
# that contends with other proposals for the same row
cas_contention_timeout_in_ms: 1000
# How long the coordinator should wait for truncates to complete
# (This can be much longer, because unless auto_snapshot is disabled
# we need to flush first so we can snapshot before removing the data.)
truncate_request_timeout_in_ms: 60000
# The default timeout for other, miscellaneous operations
request_timeout_in_ms: 10000
# Enable operation timeout information exchange between nodes to accurately
# measure request timeouts. If disabled, replicas will assume that requests
# were forwarded to them instantly by the coordinator, which means that
# under overload conditions we will waste that much extra time processing
# already-timed-out requests.
#
# Warning: before enabling this property make sure to ntp is installed
# and the times are synchronized between the nodes.
cross_node_timeout: false
# Enable socket timeout for streaming operation.
# When a timeout occurs during streaming, streaming is retried from the start
# of the current file. This _can_ involve re-streaming an important amount of
# data, so you should avoid setting the value too low.
# Default value is 3600000, which means streams timeout after an hour.
# streaming_socket_timeout_in_ms: 3600000
# phi value that must be reached for a host to be marked down.
# most users should never need to adjust this.
# phi_convict_threshold: 8
# endpoint_snitch -- Set this to a class that implements
# IEndpointSnitch. The snitch has two functions:
# - it teaches Cassandra enough about your network topology to route
# requests efficiently
# - it allows Cassandra to spread replicas around your cluster to avoid
# correlated failures. It does this by grouping machines into
# "datacenters" and "racks." Cassandra will do its best not to have
# more than one replica on the same "rack" (which may not actually
# be a physical location)
#
# IF YOU CHANGE THE SNITCH AFTER DATA IS INSERTED INTO THE CLUSTER,
# YOU MUST RUN A FULL REPAIR, SINCE THE SNITCH AFFECTS WHERE REPLICAS
# ARE PLACED.
#
# IF THE RACK A REPLICA IS PLACED IN CHANGES AFTER THE REPLICA HAS BEEN
# ADDED TO A RING, THE NODE MUST BE DECOMMISSIONED AND REBOOTSTRAPPED.
#
# Out of the box, Cassandra provides
# - SimpleSnitch:
# Treats Strategy order as proximity. This can improve cache
# locality when disabling read repair. Only appropriate for
# single-datacenter deployments.
# - GossipingPropertyFileSnitch
# This should be your go-to snitch for production use. The rack
# and datacenter for the local node are defined in
# cassandra-rackdc.properties and propagated to other nodes via
# gossip. If cassandra-topology.properties exists, it is used as a
# fallback, allowing migration from the PropertyFileSnitch.
# - PropertyFileSnitch:
# Proximity is determined by rack and data center, which are
# explicitly configured in cassandra-topology.properties.
# - Ec2Snitch:
# Appropriate for EC2 deployments in a single Region. Loads Region
# and Availability Zone information from the EC2 API. The Region is
# treated as the datacenter, and the Availability Zone as the rack.
# Only private IPs are used, so this will not work across multiple
# Regions.
# - Ec2MultiRegionSnitch:
# Uses public IPs as broadcast_address to allow cross-region
# connectivity. (Thus, you should set seed addresses to the public
# IP as well.) You will need to open the storage_port or
# ssl_storage_port on the public IP firewall. (For intra-Region
# traffic, Cassandra will switch to the private IP after
# establishing a connection.)
# - RackInferringSnitch:
# Proximity is determined by rack and data center, which are
# assumed to correspond to the 3rd and 2nd octet of each node's IP
# address, respectively. Unless this happens to match your
# deployment conventions, this is best used as an example of
# writing a custom Snitch class and is provided in that spirit.
#
# You can use a custom Snitch by setting this to the full class name
# of the snitch, which will be assumed to be on your classpath.
endpoint_snitch: SimpleSnitch
# controls how often to perform the more expensive part of host score
# calculation
dynamic_snitch_update_interval_in_ms: 100
# controls how often to reset all host scores, allowing a bad host to
# possibly recover
dynamic_snitch_reset_interval_in_ms: 600000
# if set greater than zero and read_repair_chance is < 1.0, this will allow
# 'pinning' of replicas to hosts in order to increase cache capacity.
# The badness threshold will control how much worse the pinned host has to be
# before the dynamic snitch will prefer other replicas over it. This is
# expressed as a double which represents a percentage. Thus, a value of
# 0.2 means Cassandra would continue to prefer the static snitch values
# until the pinned host was 20% worse than the fastest.
dynamic_snitch_badness_threshold: 0.1
# request_scheduler -- Set this to a class that implements
# RequestScheduler, which will schedule incoming client requests
# according to the specific policy. This is useful for multi-tenancy
# with a single Cassandra cluster.
# NOTE: This is specifically for requests from the client and does
# not affect inter node communication.
# org.apache.cassandra.scheduler.NoScheduler - No scheduling takes place
# org.apache.cassandra.scheduler.RoundRobinScheduler - Round robin of
# client requests to a node with a separate queue for each
# request_scheduler_id. The scheduler is further customized by
# request_scheduler_options as described below.
request_scheduler: org.apache.cassandra.scheduler.NoScheduler
# Scheduler Options vary based on the type of scheduler
# NoScheduler - Has no options
# RoundRobin
# - throttle_limit -- The throttle_limit is the number of in-flight
# requests per client. Requests beyond
# that limit are queued up until
# running requests can complete.
# The value of 80 here is twice the number of
# concurrent_reads + concurrent_writes.
# - default_weight -- default_weight is optional and allows for
# overriding the default which is 1.
# - weights -- Weights are optional and will default to 1 or the
# overridden default_weight. The weight translates into how
# many requests are handled during each turn of the
# RoundRobin, based on the scheduler id.
#
# request_scheduler_options:
# throttle_limit: 80
# default_weight: 5
# weights:
# Keyspace1: 1
# Keyspace2: 5
# request_scheduler_id -- An identifier based on which to perform
# the request scheduling. Currently the only valid option is keyspace.
# request_scheduler_id: keyspace
# Enable or disable inter-node encryption
# Default settings are TLS v1, RSA 1024-bit keys (it is imperative that
# users generate their own keys) TLS_RSA_WITH_AES_128_CBC_SHA as the cipher
# suite for authentication, key exchange and encryption of the actual data transfers.
# Use the DHE/ECDHE ciphers if running in FIPS 140 compliant mode.
# NOTE: No custom encryption options are enabled at the moment
# The available internode options are : all, none, dc, rack
#
# If set to dc cassandra will encrypt the traffic between the DCs
# If set to rack cassandra will encrypt the traffic between the racks
#
# The passwords used in these options must match the passwords used when generating
# the keystore and truststore. For instructions on generating these files, see:
# http://download.oracle.com/javase/6/docs/technotes/guides/security/jsse/JSSERefGuide.html#CreateKeystore
#
server_encryption_options:
internode_encryption: none
keystore: conf/.keystore
keystore_password: cassandra
truststore: conf/.truststore
truststore_password: cassandra
# More advanced defaults below:
# protocol: TLS
# algorithm: SunX509
# store_type: JKS
# cipher_suites: [TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA]
# require_client_auth: false
# enable or disable client/server encryption.
client_encryption_options:
enabled: false
# If enabled and optional is set to true encrypted and unencrypted connections are handled.
optional: false
keystore: conf/.keystore
keystore_password: cassandra
# require_client_auth: false
# Set trustore and truststore_password if require_client_auth is true
# truststore: conf/.truststore
# truststore_password: cassandra
# More advanced defaults below:
# protocol: TLS
# algorithm: SunX509
# store_type: JKS
# cipher_suites: [TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA]
# internode_compression controls whether traffic between nodes is
# compressed.
# can be: all - all traffic is compressed
# dc - traffic between different datacenters is compressed
# none - nothing is compressed.
internode_compression: all
# Enable or disable tcp_nodelay for inter-dc communication.
# Disabling it will result in larger (but fewer) network packets being sent,
# reducing overhead from the TCP protocol itself, at the cost of increasing
# latency if you block for cross-datacenter responses.
inter_dc_tcp_nodelay: false
# TTL for different trace types used during logging of the repair process.
tracetype_query_ttl: 86400
tracetype_repair_ttl: 604800
# GC Pauses greater than gc_warn_threshold_in_ms will be logged at WARN level
# Adjust the threshold based on your application throughput requirement
# By default, Cassandra logs GC Pauses greater than 200 ms at INFO level
gc_warn_threshold_in_ms: 1000
# UDFs (user defined functions) are disabled by default.
# As of Cassandra 3.0 there is a sandbox in place that should prevent execution of evil code.
enable_user_defined_functions: false
# Enables scripted UDFs (JavaScript UDFs).
# Java UDFs are always enabled, if enable_user_defined_functions is true.
# Enable this option to be able to use UDFs with "language javascript" or any custom JSR-223 provider.
# This option has no effect, if enable_user_defined_functions is false.
enable_scripted_user_defined_functions: false
# The default Windows kernel timer and scheduling resolution is 15.6ms for power conservation.
# Lowering this value on Windows can provide much tighter latency and better throughput, however
# some virtualized environments may see a negative performance impact from changing this setting
# below their system default. The sysinternals 'clockres' tool can confirm your system's default
# setting.
windows_timer_interval: 1
Raw
jvm.options33
###########################################################################
# jvm.options #
# #
# - all flags defined here will be used by cassandra to startup the JVM #
# - one flag should be specified per line #
# - lines that do not start with '-' will be ignored #
# - only static flags are accepted (no variables or parameters) #
# - dynamic flags will be appended to these on cassandra-env #
###########################################################################
######################
# STARTUP PARAMETERS #
######################
# Uncomment any of the following properties to enable specific startup parameters
# In a multi-instance deployment, multiple Cassandra instances will independently assume that all
# CPU processors are available to it. This setting allows you to specify a smaller set of processors
# and perhaps have affinity.
#-Dcassandra.available_processors=number_of_processors
# The directory location of the cassandra.yaml file.
#-Dcassandra.config=directory
# Sets the initial partitioner token for a node the first time the node is started.
#-Dcassandra.initial_token=token
# Set to false to start Cassandra on a node but not have the node join the cluster.
#-Dcassandra.join_ring=true|false
# Set to false to clear all gossip state for the node on restart. Use when you have changed node
# information in cassandra.yaml (such as listen_address).
#-Dcassandra.load_ring_state=true|false
# Enable pluggable metrics reporter. See Pluggable metrics reporting in Cassandra 2.0.2.
#-Dcassandra.metricsReporterConfigFile=file
# Set the port on which the CQL native transport listens for clients. (Default: 9042)
#-Dcassandra.native_transport_port=port
# Overrides the partitioner. (Default: org.apache.cassandra.dht.Murmur3Partitioner)
#-Dcassandra.partitioner=partitioner
# To replace a node that has died, restart a new node in its place specifying the address of the
# dead node. The new node must not have any data in its data directory, that is, it must be in the
# same state as before bootstrapping.
#-Dcassandra.replace_address=listen_address or broadcast_address of dead node
# Allow restoring specific tables from an archived commit log.
#-Dcassandra.replayList=table
# Allows overriding of the default RING_DELAY (1000ms), which is the amount of time a node waits
# before joining the ring.
#-Dcassandra.ring_delay_ms=ms
# Set the port for the Thrift RPC service, which is used for client connections. (Default: 9160)
#-Dcassandra.rpc_port=port
# Set the SSL port for encrypted communication. (Default: 7001)
#-Dcassandra.ssl_storage_port=port
# Enable or disable the native transport server. See start_native_transport in cassandra.yaml.
# cassandra.start_native_transport=true|false
# Enable or disable the Thrift RPC server. (Default: true)
#-Dcassandra.start_rpc=true/false
# Set the port for inter-node communication. (Default: 7000)
#-Dcassandra.storage_port=port
# Set the default location for the trigger JARs. (Default: conf/triggers)
#-Dcassandra.triggers_dir=directory
# For testing new compaction and compression strategies. It allows you to experiment with different
# strategies and benchmark write performance differences without affecting the production workload.
#-Dcassandra.write_survey=true
########################
# GENERAL JVM SETTINGS #
########################
# enable assertions. disabling this in production will give a modest
# performance benefit (around 5%).
-ea
# enable thread priorities, primarily so we can give periodic tasks
# a lower priority to avoid interfering with client workload
-XX:+UseThreadPriorities
# allows lowering thread priority without being root on linux - probably
# not necessary on Windows but doesn't harm anything.
# see http://tech.stolsvik.com/2010/01/linux-java-thread-priorities-workar
-XX:ThreadPriorityPolicy=42
# Enable heap-dump if there's an OOM
-XX:+HeapDumpOnOutOfMemoryError
# Per-thread stack size.
-Xss256k
# Larger interned string table, for gossip's benefit (CASSANDRA-6410)
-XX:StringTableSize=1000003
# Make sure all memory is faulted and zeroed on startup.
# This helps prevent soft faults in containers and makes
# transparent hugepage allocation more effective.
-XX:+AlwaysPreTouch
# Disable biased locking as it does not benefit Cassandra.
-XX:-UseBiasedLocking
# Enable thread-local allocation blocks and allow the JVM to automatically
# resize them at runtime.
-XX:+UseTLAB
-XX:+ResizeTLAB
# http://www.evanjones.ca/jvm-mmap-pause.html
-XX:+PerfDisableSharedMem
# Prefer binding to IPv4 network intefaces (when net.ipv6.bindv6only=1). See
# http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6342561 (short version:
# comment out this entry to enable IPv6 support).
-Djava.net.preferIPv4Stack=true
### Debug options
# uncomment to enable flight recorder
#-XX:+UnlockCommercialFeatures
#-XX:+FlightRecorder
# uncomment to have Cassandra JVM listen for remote debuggers/profilers on port 1414
#-agentlib:jdwp=transport=dt_socket,server=y,suspend=n,address=1414
# uncomment to have Cassandra JVM log internal method compilation (developers only)
#-XX:+UnlockDiagnosticVMOptions
#-XX:+LogCompilation
#################
# HEAP SETTINGS #
#################
# Heap size is automatically calculated by cassandra-env based on this
# formula: max(min(1/2 ram, 1024MB), min(1/4 ram, 8GB))
# That is:
# - calculate 1/2 ram and cap to 1024MB
# - calculate 1/4 ram and cap to 8192MB
# - pick the max
#
# For production use you may wish to adjust this for your environment.
# If that's the case, uncomment the -Xmx and Xms options below to override the
# automatic calculation of JVM heap memory.
#
# It is recommended to set min (-Xms) and max (-Xmx) heap sizes to
# the same value to avoid stop-the-world GC pauses during resize, and
# so that we can lock the heap in memory on startup to prevent any
# of it from being swapped out.
#-Xms4G
#-Xmx4G
# Young generation size is automatically calculated by cassandra-env
# based on this formula: min(100 * num_cores, 1/4 * heap size)
#
# The main trade-off for the young generation is that the larger it
# is, the longer GC pause times will be. The shorter it is, the more
# expensive GC will be (usually).
#
# It is not recommended to set the young generation size if using the
# G1 GC, since that will override the target pause-time goal.
# More info: http://www.oracle.com/technetwork/articles/java/g1gc-1984535.html
#
# The example below assumes a modern 8-core+ machine for decent
# times. If in doubt, and if you do not particularly want to tweak, go
# 100 MB per physical CPU core.
#-Xmn800M
#################
# GC SETTINGS #
#################
### CMS Settings
-XX:+UseParNewGC
-XX:+UseConcMarkSweepGC
-XX:+CMSParallelRemarkEnabled
-XX:SurvivorRatio=8
-XX:MaxTenuringThreshold=1
-XX:CMSInitiatingOccupancyFraction=75
-XX:+UseCMSInitiatingOccupancyOnly
-XX:CMSWaitDuration=10000
-XX:+CMSParallelInitialMarkEnabled
-XX:+CMSEdenChunksRecordAlways
# some JVMs will fill up their heap when accessed via JMX, see CASSANDRA-6541
-XX:+CMSClassUnloadingEnabled
### G1 Settings (experimental, comment previous section and uncomment section below to enable)
## Use the Hotspot garbage-first collector.
#-XX:+UseG1GC
#
## Have the JVM do less remembered set work during STW, instead
## preferring concurrent GC. Reduces p99.9 latency.
#-XX:G1RSetUpdatingPauseTimePercent=5
#
## Main G1GC tunable: lowering the pause target will lower throughput and vise versa.
## 200ms is the JVM default and lowest viable setting
## 1000ms increases throughput. Keep it smaller than the timeouts in cassandra.yaml.
#-XX:MaxGCPauseMillis=500
## Optional G1 Settings
# Save CPU time on large (>= 16GB) heaps by delaying region scanning
# until the heap is 70% full. The default in Hotspot 8u40 is 40%.
#-XX:InitiatingHeapOccupancyPercent=70
# For systems with > 8 cores, the default ParallelGCThreads is 5/8 the number of logical cores.
# Otherwise equal to the number of cores when 8 or less.
# Machines with > 10 cores should try setting these to <= full cores.
#-XX:ParallelGCThreads=16
# By default, ConcGCThreads is 1/4 of ParallelGCThreads.
# Setting both to the same value can reduce STW durations.
#-XX:ConcGCThreads=16
### GC logging options -- uncomment to enable
-XX:+PrintGCDetails
-XX:+PrintGCDateStamps
-XX:+PrintHeapAtGC
-XX:+PrintTenuringDistribution
-XX:+PrintGCApplicationStoppedTime
-XX:+PrintPromotionFailure
#-XX:PrintFLSStatistics=1
#-Xloggc:/var/log/cassandra/gc.log
-XX:+UseGCLogFileRotation
-XX:NumberOfGCLogFiles=10
-XX:GCLogFileSize=10M
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment