Last active
February 14, 2024 03:40
-
-
Save tobozo/681d79c937ca3b5fac711bec9438918e to your computer and use it in GitHub Desktop.
Spacehuhn's minimalistic deauth detector shimmed for ESP32 and ESP8266
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
/* | |
Original project: | |
https://github.com/spacehuhn/DeauthDetector | |
Applied/adapted these PRs: | |
https://github.com/spacehuhn/DeauthDetector/pull/4 | |
https://github.com/spacehuhn/PacketMonitor/pull/3/files?diff=split | |
*/ | |
#if defined(ESP8266) | |
#include <ESP8266WiFi.h> | |
#else | |
#include <WiFi.h> | |
#endif | |
#include "Mac.h" | |
#if defined(ESP8266) | |
extern "C" { | |
#include "user_interface.h" | |
} | |
#else | |
#include "esp_wifi.h" | |
const wifi_promiscuous_filter_t filt={ | |
.filter_mask=WIFI_PROMIS_FILTER_MASK_MGMT|WIFI_PROMIS_FILTER_MASK_DATA | |
}; | |
typedef struct { | |
uint8_t mac[6]; | |
} __attribute__((packed)) MacAddr; | |
typedef struct { | |
int16_t fctl; | |
int16_t duration; | |
MacAddr da; | |
MacAddr sa; | |
MacAddr bssid; | |
int16_t seqctl; | |
unsigned char payload[]; | |
} __attribute__((packed)) WifiMgmtHdr; | |
#endif | |
//===== SETTINGS =====// | |
#define channel 1 //the channel to start scanning (1-14) | |
#define channelHopping true //scan on all channels | |
#define maxChannel 11 //US = 11, EU = 13, Japan = 14 | |
#define ledPin 2 //led pin ( 2 = built-in LED) | |
#define inverted true // invert HIGH/LOW for the LED | |
#define packetRate 3 //min. packets before it gets recognized as an attack | |
#define scanTime 500 //scan time per channel in ms | |
unsigned long count = 0; | |
unsigned long prevTime = 0; | |
int curChannel = channel; | |
void dumpPacket(uint8_t* buf, uint16_t len) { | |
if(buf == nullptr || len <= 27) | |
return; | |
Mac from(buf[16],buf[17],buf[18],buf[19],buf[20],buf[21]); | |
Mac to(buf[22],buf[23],buf[24],buf[25],buf[26],buf[27]); | |
Serial.print("Chan "); | |
Serial.println(curChannel); | |
Serial.print("From "); | |
from._println(); | |
Serial.print("To "); | |
to._println(); | |
Serial.println(); | |
} | |
#if defined(ESP8266) | |
void sniffer(uint8_t *buf, uint16_t len) | |
#else | |
void sniffer(void* buf, wifi_promiscuous_pkt_type_t type) | |
#endif | |
{ | |
#if defined(ESP8266) | |
if(buf[12] == 0xA0 || buf[12] == 0xC0){ | |
count++; | |
} | |
#else | |
if (type == WIFI_PKT_MGMT) { | |
wifi_promiscuous_pkt_t *p = (wifi_promiscuous_pkt_t*)buf; | |
int len = p->rx_ctrl.sig_len; | |
WifiMgmtHdr *wh = (WifiMgmtHdr*)p->payload; | |
len -= sizeof(WifiMgmtHdr); | |
if (len < 0) return; | |
int fctl = ntohs(wh->fctl); | |
if (fctl & 0x0F00 == 0x0A00 || fctl & 0x0F00 == 0x0C00) { | |
count++; | |
Serial.println("DEAUTH:"); | |
} | |
} | |
#endif | |
} | |
void setup() { | |
Serial.begin(115200); | |
#if defined(ESP8266) | |
wifi_set_opmode(STATION_MODE); | |
wifi_promiscuous_enable(0); | |
WiFi.disconnect(); | |
wifi_set_promiscuous_rx_cb(sniffer); | |
wifi_set_channel(curChannel); | |
wifi_promiscuous_enable(1); | |
#else | |
wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT(); | |
esp_wifi_init(&cfg); | |
//esp_wifi_set_country(WIFI_COUNTRY_EU); | |
esp_wifi_set_storage(WIFI_STORAGE_RAM); | |
esp_wifi_set_mode(WIFI_MODE_NULL); | |
esp_wifi_start(); | |
esp_wifi_set_promiscuous(true); | |
esp_wifi_set_promiscuous_filter(&filt); | |
esp_wifi_set_promiscuous_rx_cb(&sniffer); | |
esp_wifi_set_channel(curChannel, WIFI_SECOND_CHAN_NONE); | |
#endif | |
pinMode(ledPin, OUTPUT); | |
Serial.println("starting!"); | |
} | |
void loop() { | |
unsigned long curTime = millis(); | |
unsigned long delta = curTime - prevTime; | |
if (delta < scanTime) | |
delay(scanTime - delta); | |
digitalWrite(ledPin, (count >= packetRate) ^ inverted); | |
Serial.print(curChannel); | |
Serial.print(": "); | |
Serial.println(count); | |
prevTime = curTime; | |
count = 0; | |
if(channelHopping){ | |
curChannel = curChannel % maxChannel + 1; | |
#if defined(ESP8266) | |
wifi_set_channel(curChannel); | |
#else | |
esp_wifi_set_channel(curChannel, WIFI_SECOND_CHAN_NONE); | |
#endif | |
} | |
} |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
#include "Mac.h" | |
Mac::Mac(){ | |
for(int i=0;i<6;i++){ | |
adress[i] = 0x00; | |
} | |
} | |
Mac::Mac(uint8_t first, uint8_t second, uint8_t third, uint8_t fourth, uint8_t fifth, uint8_t sixth){ | |
adress[0] = first; | |
adress[1] = second; | |
adress[2] = third; | |
adress[3] = fourth; | |
adress[4] = fifth; | |
adress[5] = sixth; | |
} | |
void Mac::set(uint8_t first, uint8_t second, uint8_t third, uint8_t fourth, uint8_t fifth, uint8_t sixth){ | |
adress[0] = first; | |
adress[1] = second; | |
adress[2] = third; | |
adress[3] = fourth; | |
adress[4] = fifth; | |
adress[5] = sixth; | |
} | |
void Mac::setAt(uint8_t first, int num){ | |
if(num > -1 && num < 6) adress[num] = first; | |
} | |
void Mac::setMac(Mac adr){ | |
for(int i=0;i<6;i++){ | |
adress[i] = adr._get(i); | |
} | |
} | |
bool Mac::valid(){ | |
for(int i=0;i<6;i++){ | |
if(adress[i] != 0xFF && adress[i] != 0x00) return true; | |
} | |
return false; | |
} | |
String Mac::toString(){ | |
String value = ""; | |
for(int i=0; i<6; i++) { | |
if(adress[i]<0x10) { | |
value += "0"; | |
} | |
value += String(adress[i],HEX); | |
if(i<5) value += ":"; | |
} | |
return value; | |
} | |
void Mac::_print(){Serial.print(Mac::toString());} | |
void Mac::_println(){Serial.println(Mac::toString());} | |
uint8_t Mac::_get(int num){return adress[num];} | |
bool Mac::compare(Mac target){ | |
for(int i=0;i<6;i++){ | |
if(adress[i] != target._get(i)) return false; | |
} | |
return true; | |
} | |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
#ifndef Mac_h | |
#define Mac_h | |
#include <Arduino.h> | |
class Mac | |
{ | |
public: | |
Mac(); | |
Mac(uint8_t first, uint8_t second, uint8_t third, uint8_t fourth, uint8_t fifth, uint8_t sixth); | |
void set(uint8_t first, uint8_t second, uint8_t third, uint8_t fourth, uint8_t fifth, uint8_t sixth); | |
void setAt(uint8_t first, int num); | |
void setMac(Mac adr); | |
String toString(); | |
void _print(); | |
void _println(); | |
uint8_t _get(int num); | |
bool compare(Mac target); | |
bool valid(); | |
private: | |
uint8_t adress[6]; | |
}; | |
#endif |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
thx for your quick response. i have only a m5-stack atom lite and an atom matrix, so i search for something without display ... ;-)