Skip to content

Instantly share code, notes, and snippets.

@tomari

tomari/thinkpad-z60t.txt

Created January 12, 2015 06:50
Show Gist options
  • Save tomari/1364f518f8eb962a722b to your computer and use it in GitHub Desktop.
Save tomari/1364f518f8eb962a722b to your computer and use it in GitHub Desktop.
Download ZIP
Lenovo/IBM ThinkPad Z60t
Raw
thinkpad-z60t.txt
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 13
model name : Intel(R) Pentium(R) M processor 2.00GHz
stepping : 8
microcode : 0x20
cpu MHz : 800.000
cache size : 2048 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx up bts est tm2
bogomips : 1596.04
clflush size : 64
cache_alignment : 64
address sizes : 32 bits physical, 32 bits virtual
power management:
-[0000:00]-+-00.0 Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590]
+-02.0 Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592]
+-02.1 Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792]
+-1b.0 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668]
+-1c.0-[02]----00.0 Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express [14e4:167d]
+-1c.1-[03-0a]--
+-1c.2-[0b-12]--
+-1c.3-[13]----00.0 Atheros Communications Inc. AR5212 802.11abg NIC [168c:1014]
+-1d.0 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658]
+-1d.1 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659]
+-1d.2 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a]
+-1d.3 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b]
+-1d.7 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c]
+-1e.0-[14-17]--+-00.0 Ricoh Co Ltd RL5c476 II [1180:0476]
| +-00.1 Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552]
| \-00.2 Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822]
+-1f.0 Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641]
+-1f.2 Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653]
\-1f.3 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a]
/proc/interrupts
CPU0
0: 13093 IO-APIC-edge timer
1: 9 IO-APIC-edge i8042
3: 1 IO-APIC-edge
8: 1 IO-APIC-edge rtc0
9: 19032 IO-APIC-fasteoi acpi
12: 2636 IO-APIC-edge i8042
14: 25946 IO-APIC-edge ata_piix
15: 81 IO-APIC-edge ata_piix
16: 49766 IO-APIC-fasteoi uhci_hcd:usb2, yenta, i915, eth0
17: 33 IO-APIC-fasteoi firewire_ohci, uhci_hcd:usb3
18: 26 IO-APIC-fasteoi mmc0, uhci_hcd:usb4
19: 2 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb5, ath
44: 99 PCI-MSI-edge snd_hda_intel
NMI: 492 Non-maskable interrupts
LOC: 330407 Local timer interrupts
SPU: 0 Spurious interrupts
PMI: 492 Performance monitoring interrupts
IWI: 0 IRQ work interrupts
RES: 0 Rescheduling interrupts
CAL: 0 Function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
THR: 0 Threshold APIC interrupts
MCE: 0 Machine check exceptions
MCP: 7 Machine check polls
ERR: 0
MIS: 0
/proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0062-0062 : EC data
0064-0064 : keyboard
0066-0066 : EC cmd
0070-0071 : rtc0
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:1f.2
0170-0177 : ata_piix
01f0-01f7 : 0000:00:1f.2
01f0-01f7 : ata_piix
02f8-02ff : nsc-ircc
0376-0376 : 0000:00:1f.2
0376-0376 : ata_piix
03c0-03df : vga+
03f6-03f6 : 0000:00:1f.2
03f6-03f6 : ata_piix
0cf8-0cff : PCI conf1
1000-107f : 0000:00:1f.0
1000-107f : pnp 00:02
1000-1003 : ACPI PM1a_EVT_BLK
1004-1005 : ACPI PM1a_CNT_BLK
1008-100b : ACPI PM_TMR
1010-1015 : ACPI CPU throttle
1020-1020 : ACPI PM2_CNT_BLK
1028-102f : ACPI GPE0_BLK
1030-1033 : iTCO_wdt
1060-107f : iTCO_wdt
1180-11bf : 0000:00:1f.0
1180-11bf : pnp 00:02
15e0-15ef : pnp 00:02
1600-163f : pnp 00:02
1642-167f : pnp 00:02
1800-1807 : 0000:00:02.0
1810-181f : 0000:00:1f.2
1810-181f : ata_piix
1820-183f : 0000:00:1d.0
1820-183f : uhci_hcd
1840-185f : 0000:00:1d.1
1840-185f : uhci_hcd
1860-187f : 0000:00:1d.2
1860-187f : uhci_hcd
1880-189f : 0000:00:1d.3
1880-189f : uhci_hcd
18a0-18bf : 0000:00:1f.3
18a0-18bf : i801_smbus
2000-3fff : PCI Bus 0000:03
4000-5fff : PCI Bus 0000:0b
6000-7fff : PCI Bus 0000:13
8000-bfff : PCI Bus 0000:14
8000-80ff : PCI CardBus 0000:15
8400-84ff : PCI CardBus 0000:15
c000-cfff : PCI Bus 0000:02
/proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xa0000000 irq 44
29 [ThinkPadEC ]: ThinkPad EC - ThinkPad Console Audio Control
ThinkPad Console Audio Control at EC reg 0x30, fw 77HT58WW-1.18
# dmidecode 2.11
SMBIOS version fixup (2.33 -> 2.3).
SMBIOS 2.3 present.
68 structures occupying 2238 bytes.
Table at 0x000E0010.
Handle 0x0000, DMI type 0, 20 bytes
BIOS Information
Vendor: IBM
Version: 77ET64WW (1.24 )
Release Date: 02/27/2007
Address: 0xDC000
Runtime Size: 144 kB
ROM Size: 1024 kB
Characteristics:
PCI is supported
PC Card (PCMCIA) is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
EDD is supported
3.5"/720 kB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Handle 0x0001, DMI type 1, 25 bytes
System Information
Manufacturer: IBM
Product Name: 251247J
Version: ThinkPad Z60t
Serial Number: xxxxxxx
UUID: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
Wake-up Type: Power Switch
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: IBM
Product Name: 251247J
Version: Not Available
Serial Number: xxxxxxxxxxx
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer: IBM
Type: Notebook
Lock: Not Present
Version: Not Available
Serial Number: Not Available
Asset Tag: No Asset Information
Boot-up State: Unknown
Power Supply State: Unknown
Thermal State: Unknown
Security Status: Unknown
OEM Information: 0x00000000
Handle 0x0004, DMI type 126, 17 bytes
Inactive
Handle 0x0005, DMI type 126, 17 bytes
Inactive
Handle 0x0006, DMI type 4, 35 bytes
Processor Information
Socket Designation: None
Type: Central Processor
Family: Pentium M
Manufacturer: GenuineIntel
ID: D8 06 00 00 FF FB E9 AF
Signature: Type 0, Family 6, Model 13, Stepping 8
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Pentium(R) M processor
Voltage: 1.3 V
External Clock: 533 MHz
Max Speed: 2000 MHz
Current Speed: 2000 MHz
Status: Populated, Enabled
Upgrade: None
L1 Cache Handle: 0x000A
L2 Cache Handle: 0x000B
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0007, DMI type 5, 20 bytes
Memory Controller Information
Error Detecting Method: None
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 1024 MB
Maximum Total Memory Size: 2048 MB
Supported Speeds:
Other
Supported Memory Types:
DIMM
SDRAM
Memory Module Voltage: 2.9 V
Associated Memory Slots: 2
0x0008
0x0009
Enabled Error Correcting Capabilities:
Unknown
Handle 0x0008, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM Slot 1
Bank Connections: 0 3
Current Speed: Unknown
Type: DIMM SDRAM
Installed Size: 1024 MB (Double-bank Connection)
Enabled Size: 1024 MB (Double-bank Connection)
Error Status: OK
Handle 0x0009, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM Slot 2
Bank Connections: 4 7
Current Speed: Unknown
Type: DIMM SDRAM
Installed Size: 1024 MB (Double-bank Connection)
Enabled Size: 1024 MB (Double-bank Connection)
Error Status: OK
Handle 0x000A, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal L1 Cache
Configuration: Enabled, Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 32 kB
Maximum Size: 32 kB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Data
Associativity: 8-way Set-associative
Handle 0x000B, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal L2 Cache
Configuration: Enabled, Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 2048 kB
Maximum Size: 2048 kB
Supported SRAM Types:
Burst
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Multi-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x000C, DMI type 126, 9 bytes
Inactive
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Available
Internal Connector Type: None
External Reference Designator: Infrared
External Connector Type: Infrared
Port Type: Other
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Available
Internal Connector Type: None
External Reference Designator: Parallel
External Connector Type: DB-25 female
Port Type: Parallel Port ECP/EPP
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Available
Internal Connector Type: None
External Reference Designator: External Monitor
External Connector Type: DB-15 female
Port Type: Video Port
Handle 0x0010, DMI type 126, 9 bytes
Inactive
Handle 0x0011, DMI type 126, 9 bytes
Inactive
Handle 0x0012, DMI type 126, 9 bytes
Inactive
Handle 0x0013, DMI type 126, 9 bytes
Inactive
Handle 0x0014, DMI type 126, 9 bytes
Inactive
Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Available
Internal Connector Type: None
External Reference Designator: Microphone Jack
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Available
Internal Connector Type: None
External Reference Designator: Headphone Jack
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Available
Internal Connector Type: None
External Reference Designator: S-Video-Out
External Connector Type: Other
Port Type: Video Port
Handle 0x0018, DMI type 126, 9 bytes
Inactive
Handle 0x0019, DMI type 126, 9 bytes
Inactive
Handle 0x001A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Available
Internal Connector Type: None
External Reference Designator: Ethernet
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x001B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Available
Internal Connector Type: None
External Reference Designator: USB 1
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x001C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Available
Internal Connector Type: None
External Reference Designator: USB 2
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x001D, DMI type 126, 9 bytes
Inactive
Handle 0x001E, DMI type 126, 9 bytes
Inactive
Handle 0x001F, DMI type 126, 9 bytes
Inactive
Handle 0x0020, DMI type 126, 9 bytes
Inactive
Handle 0x0021, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Available
Internal Connector Type: None
External Reference Designator: IEEE1394
External Connector Type: IEEE 1394
Port Type: Firewire (IEEE P1394)
Handle 0x0022, DMI type 9, 13 bytes
System Slot Information
Designation: CardBus Slot 1
Type: 32-bit PC Card (PCMCIA)
Current Usage: Available
Length: Other
ID: Adapter 0, Socket 0
Characteristics:
5.0 V is provided
3.3 V is provided
PC Card-16 is supported
Cardbus is supported
Zoom Video is supported
Modem ring resume is supported
PME signal is supported
Hot-plug devices are supported
Handle 0x0023, DMI type 9, 13 bytes
System Slot Information
Designation: CardBus Slot 2
Type: 32-bit PC Card (PCMCIA)
Current Usage: Available
Length: Other
ID: Adapter 1, Socket 0
Characteristics:
5.0 V is provided
3.3 V is provided
PC Card-16 is supported
Cardbus is supported
Zoom Video is supported
Modem ring resume is supported
PME signal is supported
Hot-plug devices are supported
Handle 0x0024, DMI type 126, 13 bytes
Inactive
Handle 0x0025, DMI type 126, 13 bytes
Inactive
Handle 0x0026, DMI type 9, 13 bytes
System Slot Information
Designation: Mini-PCI Slot 1
Type: 32-bit PCI
Current Usage: Available
Length: Other
ID: 1
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
SMBus signal is supported
Handle 0x0027, DMI type 126, 13 bytes
Inactive
Handle 0x0028, DMI type 10, 6 bytes
On Board Device Information
Type: Other
Status: Enabled
Description: IBM Embedded Security hardware
Handle 0x0029, DMI type 11, 5 bytes
OEM Strings
String 1: IBM ThinkPad Embedded Controller -[77HT58WW-1.18 ]-
Handle 0x002A, DMI type 13, 22 bytes
BIOS Language Information
Language Description Format: Abbreviated
Installable Languages: 1
enUS
Currently Installed Language: enUS
Handle 0x002B, DMI type 15, 25 bytes
System Event Log
Area Length: 0 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: General-purpose non-volatile data functions
Access Address: 0x0000
Status: Valid, Not Full
Change Token: 0x000000F5
Header Format: Type 1
Supported Log Type Descriptors: 1
Descriptor 1: POST error
Data Format 1: POST results bitmap
Handle 0x002C, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 1 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x002D, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x002C
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: SODIMM
Set: None
Locator: DIMM 1
Bank Locator: Bank 0/1
Type: DDR
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x002E, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x002C
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: SODIMM
Set: None
Locator: DIMM 2
Bank Locator: Bank 2/3
Type: DDR
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x002F, DMI type 18, 23 bytes
32-bit Memory Error Information
Type: OK
Granularity: Unknown
Operation: Unknown
Vendor Syndrome: Unknown
Memory Array Address: Unknown
Device Address: Unknown
Resolution: Unknown
Handle 0x0030, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Array Handle: 0x002C
Partition Width: 2
Handle 0x0031, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x002D
Memory Array Mapped Address Handle: 0x0030
Partition Row Position: 1
Handle 0x0032, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00040000000
Ending Address: 0x0007FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x002E
Memory Array Mapped Address Handle: 0x0030
Partition Row Position: 1
Handle 0x0033, DMI type 21, 7 bytes
Built-in Pointing Device
Type: Track Point
Interface: PS/2
Buttons: 3
Handle 0x0034, DMI type 21, 7 bytes
Built-in Pointing Device
Type: Touch Pad
Interface: PS/2
Buttons: 0
Handle 0x0035, DMI type 24, 5 bytes
Hardware Security
Power-On Password Status: Disabled
Keyboard Password Status: Disabled
Administrator Password Status: Disabled
Front Panel Reset Status: Unknown
Handle 0x0036, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x0037, DMI type 131, 17 bytes
OEM-specific Type
Header and Data:
83 11 37 00 01 02 03 FF FF 1F 00 00 00 00 00 02
00
Strings:
BOOTINF 20h
BOOTDEV 21h
KEYPTRS 23h
Handle 0x0038, DMI type 131, 11 bytes
OEM-specific Type
Header and Data:
83 0B 38 00 00 00 E8 FF C5 01 01
Strings:
IBM System Metrics
Handle 0x0039, DMI type 132, 7 bytes
OEM-specific Type
Header and Data:
84 07 39 00 01 D8 36
Handle 0x003A, DMI type 133, 5 bytes
OEM-specific Type
Header and Data:
85 05 3A 00 01
Strings:
KHOIHGIUCCHHII
Handle 0x003B, DMI type 134, 13 bytes
OEM-specific Type
Header and Data:
86 0D 3B 00 19 12 05 20 00 00 00 00 00
Handle 0x003C, DMI type 134, 16 bytes
OEM-specific Type
Header and Data:
86 10 3C 00 00 41 54 4D 4C 01 01 00 06 03 01 02
Strings:
TPM INFO
System Reserved
Handle 0x003D, DMI type 135, 13 bytes
OEM-specific Type
Header and Data:
87 0D 3D 00 54 50 07 00 01 00 00 00 00
Handle 0x003E, DMI type 135, 18 bytes
OEM-specific Type
Header and Data:
87 12 3E 00 54 50 07 01 01 A0 00 00 00 00 00 00
00 00
Handle 0x003F, DMI type 136, 6 bytes
OEM-specific Type
Header and Data:
88 06 3F 00 5A 5A
Handle 0x0040, DMI type 137, 26 bytes
OEM-specific Type
Header and Data:
89 1A 40 00 0A 01 00 01 01 00 50 57 4D 53 20 49
6E 66 6F 72 6D 61 74 69 6F 6E
Handle 0x0041, DMI type 138, 40 bytes
OEM-specific Type
Header and Data:
8A 28 41 00 14 01 01 01 07 01 01 0C 01 01 0C 01
01 0C 00 00 42 49 4F 53 20 50 61 73 73 77 6F 72
64 20 46 6F 72 6D 61 74
Handle 0x0042, DMI type 139, 37 bytes
OEM-specific Type
Header and Data:
8B 25 42 00 11 01 0A 00 00 00 00 00 00 00 00 00
00 50 57 4D 53 20 4B 65 79 20 49 6E 66 6F 72 6D
61 74 69 6F 6E
Handle 0x0043, DMI type 127, 4 bytes
End Of Table
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-686-pae ([email protected]) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.65-1
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable)
[ 0.000000] BIOS-e820: 000000007f6d0000 - 000000007f6e5000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f6e5000 - 000000007f700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: IBM 251247J/251247J, BIOS 77ET64WW (1.24 ) 02/27/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7f6d0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-back
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable
[ 0.000000] 2 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19f9000-1a00000
[ 0.000000] RAMDISK: 36c76000 - 37633000
[ 0.000000] ACPI: RSDP 000f6a90 00024 (v02 IBM )
[ 0.000000] ACPI: XSDT 7f6d670a 0005C (v01 IBM TP-77 00001240 LTP 00000000)
[ 0.000000] ACPI: FACP 7f6d6800 000F4 (v03 IBM TP-77 00001240 IBM 00000001)
[ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20110623/tbfadt-529)
[ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20110623/tbfadt-560)
[ 0.000000] ACPI: DSDT 7f6d69e7 0E3F2 (v01 IBM TP-77 00001240 MSFT 0100000E)
[ 0.000000] ACPI: FACS 7f6f6000 00040
[ 0.000000] ACPI: SSDT 7f6d69b4 00033 (v01 IBM TP-77 00001240 MSFT 0100000E)
[ 0.000000] ACPI: ECDT 7f6e4dd9 00052 (v01 IBM TP-77 00001240 IBM 00000001)
[ 0.000000] ACPI: TCPA 7f6e4e2b 00032 (v01 IBM TP-77 00001240 PTL 00000001)
[ 0.000000] ACPI: APIC 7f6e4e5d 0005A (v01 IBM TP-77 00001240 IBM 00000001)
[ 0.000000] ACPI: MCFG 7f6e4eb7 0003C (v01 IBM TP-77 00001240 IBM 00000001)
[ 0.000000] ACPI: BOOT 7f6e4fd8 00028 (v01 IBM TP-77 00001240 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1148MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x0007f6d0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f6d0
[ 0.000000] On node 0 totalpages: 521823
[ 0.000000] free_area_init_node: node 0, pgdat c1412800, node_mem_map f5c86200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2298 pages used for memmap
[ 0.000000] HighMem zone: 291800 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f79e3000 s33280 r0 d24064 u57344
[ 0.000000] pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517745
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:0007f6d0)
[ 0.000000] Memory: 2054860k/2087744k available (2859k kernel code, 32432k reserved, 1340k data, 420k init, 1176392k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc141b000 - 0xc1484000 ( 420 kB)
[ 0.000000] .data : 0xc12cae80 - 0xc141a200 (1340 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12cae80 (2859 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f5806000 soft=f5808000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1995.052 MHz processor.
[ 0.008002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.10 BogoMIPS (lpj=7980208)
[ 0.008010] pid_max: default: 32768 minimum: 301
[ 0.008056] Security Framework initialized
[ 0.008065] AppArmor: AppArmor disabled by boot time parameter
[ 0.008081] Mount-cache hash table entries: 512
[ 0.008245] Initializing cgroup subsys cpuacct
[ 0.008251] Initializing cgroup subsys memory
[ 0.008263] Initializing cgroup subsys devices
[ 0.008266] Initializing cgroup subsys freezer
[ 0.008268] Initializing cgroup subsys net_cls
[ 0.008271] Initializing cgroup subsys blkio
[ 0.008279] Initializing cgroup subsys perf_event
[ 0.008311] Disabled fast string operations
[ 0.008322] mce: CPU supports 5 MCE banks
[ 0.008332] CPU0: Thermal monitoring enabled (TM2)
[ 0.008398] SMP alternatives: switching to UP code
[ 0.012096] Freeing SMP alternatives: 8k freed
[ 0.012101] ACPI: Core revision 20110623
[ 0.020081] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.024238] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.063931] CPU0: Intel(R) Pentium(R) M processor 2.00GHz stepping 08
[ 0.064003] Performance Events: p6 PMU driver.
[ 0.064003] ... version: 0
[ 0.064003] ... bit width: 32
[ 0.064003] ... generic registers: 2
[ 0.064003] ... value mask: 00000000ffffffff
[ 0.064003] ... max period: 000000007fffffff
[ 0.064003] ... fixed-purpose events: 0
[ 0.064003] ... event mask: 0000000000000003
[ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.064003] Brought up 1 CPUs
[ 0.064003] Total of 1 processors activated (3990.10 BogoMIPS).
[ 0.064003] devtmpfs: initialized
[ 0.064003] PM: Registering ACPI NVS region at 7f6e5000 (110592 bytes)
[ 0.064003] print_constraints: dummy:
[ 0.064003] NET: Registered protocol family 16
[ 0.064003] ACPI: bus type pci registered
[ 0.064003] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.064003] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.064003] PCI: Using MMCONFIG for extended config space
[ 0.064003] PCI: Using configuration type 1 for base access
[ 0.064003] bio: create slab <bio-0> at 0
[ 0.064003] ACPI: Added _OSI(Module Device)
[ 0.064003] ACPI: Added _OSI(Processor Device)
[ 0.064003] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.064003] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.064955] ACPI: EC: EC description table is found, configuring boot EC
[ 0.076129] ACPI: Interpreter enabled
[ 0.076137] ACPI: (supports S0 S3 S4 S5)
[ 0.076160] ACPI: Using IOAPIC for interrupt routing
[ 0.077581] ACPI: Power Resource [PUBS] (on)
[ 0.081431] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.084676] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.084679] HEST: Table not found.
[ 0.084684] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.084711] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.084780] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.084783] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.084787] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.084790] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.084793] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.084797] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
[ 0.084809] pci 0000:00:00.0: [8086:2590] type 0 class 0x000600
[ 0.084853] pci 0000:00:02.0: [8086:2592] type 0 class 0x000300
[ 0.084864] pci 0000:00:02.0: reg 10: [mem 0xa0080000-0xa00fffff]
[ 0.084871] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807]
[ 0.084877] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
[ 0.084883] pci 0000:00:02.0: reg 1c: [mem 0xa0040000-0xa007ffff]
[ 0.084916] pci 0000:00:02.1: [8086:2792] type 0 class 0x000380
[ 0.084925] pci 0000:00:02.1: reg 10: [mem 0x00000000-0x0007ffff]
[ 0.085018] pci 0000:00:1b.0: [8086:2668] type 0 class 0x000403
[ 0.085039] pci 0000:00:1b.0: reg 10: [mem 0xa0000000-0xa0003fff 64bit]
[ 0.085136] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.085166] pci 0000:00:1c.0: [8086:2660] type 1 class 0x000604
[ 0.085269] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.085302] pci 0000:00:1c.1: [8086:2662] type 1 class 0x000604
[ 0.085402] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.085435] pci 0000:00:1c.2: [8086:2664] type 1 class 0x000604
[ 0.085535] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.085568] pci 0000:00:1c.3: [8086:2666] type 1 class 0x000604
[ 0.085669] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.085702] pci 0000:00:1d.0: [8086:2658] type 0 class 0x000c03
[ 0.085755] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
[ 0.085795] pci 0000:00:1d.1: [8086:2659] type 0 class 0x000c03
[ 0.085848] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
[ 0.085887] pci 0000:00:1d.2: [8086:265a] type 0 class 0x000c03
[ 0.085940] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
[ 0.085983] pci 0000:00:1d.3: [8086:265b] type 0 class 0x000c03
[ 0.086036] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
[ 0.086086] pci 0000:00:1d.7: [8086:265c] type 0 class 0x000c03
[ 0.086109] pci 0000:00:1d.7: reg 10: [mem 0xa0004000-0xa00043ff]
[ 0.086207] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.086233] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.086317] pci 0000:00:1f.0: [8086:2641] type 0 class 0x000601
[ 0.086424] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.086434] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.086440] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.086445] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 1600-167f
[ 0.086450] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 15c0-15cf
[ 0.086478] pci 0000:00:1f.2: [8086:2653] type 0 class 0x000101
[ 0.086497] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[ 0.086509] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[ 0.086521] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[ 0.086533] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[ 0.086545] pci 0000:00:1f.2: reg 20: [io 0x1810-0x181f]
[ 0.086596] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.086617] pci 0000:00:1f.3: [8086:266a] type 0 class 0x000c05
[ 0.086686] pci 0000:00:1f.3: reg 20: [io 0x18a0-0x18bf]
[ 0.086816] pci 0000:02:00.0: [14e4:167d] type 0 class 0x000200
[ 0.086847] pci 0000:02:00.0: reg 10: [mem 0xa0100000-0xa010ffff 64bit]
[ 0.087005] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.087029] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.087042] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.087050] pci 0000:00:1c.0: bridge window [mem 0xa0100000-0xa01fffff]
[ 0.087112] pci 0000:00:1c.1: PCI bridge to [bus 03-0a]
[ 0.087118] pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff]
[ 0.087123] pci 0000:00:1c.1: bridge window [mem 0xa2000000-0xa3ffffff]
[ 0.087131] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.087188] pci 0000:00:1c.2: PCI bridge to [bus 0b-12]
[ 0.087193] pci 0000:00:1c.2: bridge window [io 0x4000-0x5fff]
[ 0.087198] pci 0000:00:1c.2: bridge window [mem 0xa4000000-0xa5ffffff]
[ 0.087206] pci 0000:00:1c.2: bridge window [mem 0xb0100000-0xb01fffff 64bit pref]
[ 0.087288] pci 0000:13:00.0: [168c:1014] type 0 class 0x000200
[ 0.087318] pci 0000:13:00.0: reg 10: [mem 0xa7f00000-0xa7f0ffff 64bit]
[ 0.087495] pci 0000:13:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.087507] pci 0000:00:1c.3: PCI bridge to [bus 13-13]
[ 0.087512] pci 0000:00:1c.3: bridge window [io 0x6000-0x7fff]
[ 0.087518] pci 0000:00:1c.3: bridge window [mem 0xa6000000-0xa7ffffff]
[ 0.087526] pci 0000:00:1c.3: bridge window [mem 0xd0100000-0xd01fffff 64bit pref]
[ 0.088034] pci 0000:14:00.0: [1180:0476] type 2 class 0x000607
[ 0.088063] pci 0000:14:00.0: reg 10: [mem 0xb0000000-0xb0000fff]
[ 0.088105] pci 0000:14:00.0: supports D1 D2
[ 0.088107] pci 0000:14:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.088136] pci 0000:14:00.1: [1180:0552] type 0 class 0x000c00
[ 0.088162] pci 0000:14:00.1: reg 10: [mem 0xb0001000-0xb00017ff]
[ 0.088277] pci 0000:14:00.1: supports D1 D2
[ 0.088280] pci 0000:14:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.088308] pci 0000:14:00.2: [1180:0822] type 0 class 0x000805
[ 0.088334] pci 0000:14:00.2: reg 10: [mem 0xb0001800-0xb00018ff]
[ 0.088449] pci 0000:14:00.2: supports D1 D2
[ 0.088452] pci 0000:14:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.088531] pci 0000:00:1e.0: PCI bridge to [bus 14-17] (subtractive decode)
[ 0.088536] pci 0000:00:1e.0: bridge window [io 0x8000-0xbfff]
[ 0.088542] pci 0000:00:1e.0: bridge window [mem 0xa8000000-0xb00fffff]
[ 0.088550] pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.088553] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.088557] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.088638] pci_bus 0000:00: on NUMA node 0
[ 0.088642] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.088761] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.088804] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.088850] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.088895] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.088940] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.089028] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.089032] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.089034] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.093368] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.093455] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.093540] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.093625] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.093711] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.093796] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.093881] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.093966] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.094084] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.094095] vgaarb: loaded
[ 0.094097] vgaarb: bridge control possible 0000:00:02.0
[ 0.094143] PCI: Using ACPI for IRQ routing
[ 0.103876] PCI: pci_cache_line_size set to 64 bytes
[ 0.103964] Expanded resource reserved due to conflict with Adapter ROM
[ 0.103969] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.103973] reserve RAM buffer: 000000007f6d0000 - 000000007fffffff
[ 0.104222] hpet clockevent registered
[ 0.104228] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.104234] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.104240] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.108041] Switching to clocksource hpet
[ 0.109943] pnp: PnP ACPI init
[ 0.109959] ACPI: bus type pnp registered
[ 0.110453] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.110456] pnp 00:00: [mem 0x000c0000-0x000c3fff]
[ 0.110459] pnp 00:00: [mem 0x000c4000-0x000c7fff]
[ 0.110462] pnp 00:00: [mem 0x000c8000-0x000cbfff]
[ 0.110464] pnp 00:00: [mem 0x000cc000-0x000cffff]
[ 0.110467] pnp 00:00: [mem 0x000d0000-0x000d3fff]
[ 0.110470] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
[ 0.110474] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
[ 0.110477] pnp 00:00: [mem 0x000dc000-0x000dffff]
[ 0.110480] pnp 00:00: [mem 0x000e0000-0x000e3fff]
[ 0.110482] pnp 00:00: [mem 0x000e4000-0x000e7fff]
[ 0.110485] pnp 00:00: [mem 0x000e8000-0x000ebfff]
[ 0.110488] pnp 00:00: [mem 0x000ec000-0x000effff]
[ 0.110490] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.110493] pnp 00:00: [mem 0x00100000-0x7fffffff]
[ 0.110496] pnp 00:00: [mem 0xfec00000-0xffffffff]
[ 0.110563] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.110567] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.110571] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.110574] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.110578] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
[ 0.110581] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.110585] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.110589] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.110592] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.110596] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.110600] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.110603] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.110607] system 00:00: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.110611] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.110615] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.110640] pnp 00:01: [bus 00-ff]
[ 0.110643] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.110646] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.110649] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.110652] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.110655] pnp 00:01: [mem 0x000c0000-0x000c3fff window]
[ 0.110658] pnp 00:01: [mem 0x000c4000-0x000c7fff window]
[ 0.110661] pnp 00:01: [mem 0x000c8000-0x000cbfff window]
[ 0.110664] pnp 00:01: [mem 0x000cc000-0x000cffff window]
[ 0.110666] pnp 00:01: [mem 0x000d0000-0x000d3fff window]
[ 0.110669] pnp 00:01: [mem 0x000d4000-0x000d7fff window]
[ 0.110672] pnp 00:01: [mem 0x000d8000-0x000dbfff window]
[ 0.110675] pnp 00:01: [mem 0x000dc000-0x000dffff window]
[ 0.110678] pnp 00:01: [mem 0x000e0000-0x000e3fff window]
[ 0.110681] pnp 00:01: [mem 0x000e4000-0x000e7fff window]
[ 0.110684] pnp 00:01: [mem 0x000e8000-0x000ebfff window]
[ 0.110687] pnp 00:01: [mem 0x000ec000-0x000effff window]
[ 0.110690] pnp 00:01: [mem 0x80000000-0xfebfffff window]
[ 0.110738] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.110784] pnp 00:02: [io 0x0010-0x001f]
[ 0.110787] pnp 00:02: [io 0x0090-0x009f]
[ 0.110790] pnp 00:02: [io 0x0024-0x0025]
[ 0.110792] pnp 00:02: [io 0x0028-0x0029]
[ 0.110795] pnp 00:02: [io 0x002c-0x002d]
[ 0.110797] pnp 00:02: [io 0x0030-0x0031]
[ 0.110800] pnp 00:02: [io 0x0034-0x0035]
[ 0.110802] pnp 00:02: [io 0x0038-0x0039]
[ 0.110805] pnp 00:02: [io 0x003c-0x003d]
[ 0.110807] pnp 00:02: [io 0x00a4-0x00a5]
[ 0.110810] pnp 00:02: [io 0x00a8-0x00a9]
[ 0.110812] pnp 00:02: [io 0x00ac-0x00ad]
[ 0.110815] pnp 00:02: [io 0x00b0-0x00b5]
[ 0.110817] pnp 00:02: [io 0x00b8-0x00b9]
[ 0.110820] pnp 00:02: [io 0x00bc-0x00bd]
[ 0.110822] pnp 00:02: [io 0x0050-0x0053]
[ 0.110825] pnp 00:02: [io 0x0072-0x0077]
[ 0.110827] pnp 00:02: [io 0x002e-0x002f]
[ 0.110830] pnp 00:02: [io 0x1000-0x107f]
[ 0.110832] pnp 00:02: [io 0x1180-0x11bf]
[ 0.110835] pnp 00:02: [io 0x15e0-0x15ef]
[ 0.110837] pnp 00:02: [io 0x1600-0x163f]
[ 0.110840] pnp 00:02: [io 0x1642-0x167f]
[ 0.110843] pnp 00:02: [mem 0xe0000000-0xefffffff]
[ 0.110845] pnp 00:02: [mem 0xf0008000-0xf000bfff]
[ 0.110848] pnp 00:02: [mem 0xfed14000-0xfed17fff]
[ 0.110851] pnp 00:02: [mem 0xfed18000-0xfed18fff]
[ 0.110854] pnp 00:02: [mem 0xfed19000-0xfed19fff]
[ 0.110933] system 00:02: [io 0x1000-0x107f] has been reserved
[ 0.110937] system 00:02: [io 0x1180-0x11bf] has been reserved
[ 0.110942] system 00:02: [io 0x15e0-0x15ef] has been reserved
[ 0.110945] system 00:02: [io 0x1600-0x163f] has been reserved
[ 0.110949] system 00:02: [io 0x1642-0x167f] has been reserved
[ 0.110953] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.110956] system 00:02: [mem 0xf0008000-0xf000bfff] has been reserved
[ 0.110960] system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.110964] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.110968] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.110971] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.110987] pnp 00:03: [io 0x0000-0x000f]
[ 0.110990] pnp 00:03: [io 0x0080-0x008f]
[ 0.110992] pnp 00:03: [io 0x00c0-0x00df]
[ 0.110995] pnp 00:03: [dma 4]
[ 0.111029] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.111039] pnp 00:04: [io 0x0061]
[ 0.111071] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.111081] pnp 00:05: [io 0x00f0]
[ 0.111093] pnp 00:05: [irq 13]
[ 0.111126] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.111136] pnp 00:06: [io 0x0070-0x0071]
[ 0.111142] pnp 00:06: [irq 8]
[ 0.111175] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.111187] pnp 00:07: [io 0x0060]
[ 0.111190] pnp 00:07: [io 0x0064]
[ 0.111195] pnp 00:07: [irq 1]
[ 0.111227] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.111241] pnp 00:08: [irq 12]
[ 0.111282] pnp 00:08: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
[ 0.111466] pnp 00:09: Plug and Play ACPI device, IDs IBM0071 PNP0511 (disabled)
[ 0.111494] pnp 00:0a: [io 0x004e-0x004f]
[ 0.111497] pnp 00:0a: [io 0x1640-0x1641]
[ 0.111529] pnp 00:0a: Plug and Play ACPI device, IDs ATM1100 (active)
[ 0.112068] pnp: PnP ACPI: found 11 devices
[ 0.112071] ACPI: ACPI bus type pnp unregistered
[ 0.112074] PnPBIOS: Disabled by ACPI PNP
[ 0.148767] PCI: max bus depth: 2 pci_try_num: 3
[ 0.148826] pci 0000:00:02.1: BAR 0: assigned [mem 0x80000000-0x8007ffff]
[ 0.148832] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80100000-0x802fffff 64bit pref]
[ 0.148838] pci 0000:00:1c.0: BAR 13: assigned [io 0xc000-0xcfff]
[ 0.148841] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.148846] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 0.148853] pci 0000:00:1c.0: bridge window [mem 0xa0100000-0xa01fffff]
[ 0.148858] pci 0000:00:1c.0: bridge window [mem 0x80100000-0x802fffff 64bit pref]
[ 0.148867] pci 0000:00:1c.1: PCI bridge to [bus 03-0a]
[ 0.148871] pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff]
[ 0.148878] pci 0000:00:1c.1: bridge window [mem 0xa2000000-0xa3ffffff]
[ 0.148883] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.148892] pci 0000:00:1c.2: PCI bridge to [bus 0b-12]
[ 0.148896] pci 0000:00:1c.2: bridge window [io 0x4000-0x5fff]
[ 0.148902] pci 0000:00:1c.2: bridge window [mem 0xa4000000-0xa5ffffff]
[ 0.148908] pci 0000:00:1c.2: bridge window [mem 0xb0100000-0xb01fffff 64bit pref]
[ 0.148917] pci 0000:00:1c.3: PCI bridge to [bus 13-13]
[ 0.148921] pci 0000:00:1c.3: bridge window [io 0x6000-0x7fff]
[ 0.148928] pci 0000:00:1c.3: bridge window [mem 0xa6000000-0xa7ffffff]
[ 0.148933] pci 0000:00:1c.3: bridge window [mem 0xd0100000-0xd01fffff 64bit pref]
[ 0.148943] pci 0000:14:00.0: BAR 16: assigned [mem 0xa8000000-0xabffffff]
[ 0.148947] pci 0000:14:00.0: BAR 15: assigned [mem 0xd8000000-0xdbffffff pref]
[ 0.148950] pci 0000:14:00.0: BAR 14: assigned [io 0x8000-0x80ff]
[ 0.148954] pci 0000:14:00.0: BAR 13: assigned [io 0x8400-0x84ff]
[ 0.148957] pci 0000:14:00.0: CardBus bridge to [bus 15-16]
[ 0.148960] pci 0000:14:00.0: bridge window [io 0x8400-0x84ff]
[ 0.148966] pci 0000:14:00.0: bridge window [io 0x8000-0x80ff]
[ 0.148973] pci 0000:14:00.0: bridge window [mem 0xd8000000-0xdbffffff pref]
[ 0.148979] pci 0000:14:00.0: bridge window [mem 0xa8000000-0xabffffff]
[ 0.148985] pci 0000:00:1e.0: PCI bridge to [bus 14-17]
[ 0.148989] pci 0000:00:1e.0: bridge window [io 0x8000-0xbfff]
[ 0.148996] pci 0000:00:1e.0: bridge window [mem 0xa8000000-0xb00fffff]
[ 0.149002] pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.149029] pci 0000:00:1c.0: setting latency timer to 64
[ 0.149044] pci 0000:00:1c.1: setting latency timer to 64
[ 0.149060] pci 0000:00:1c.2: setting latency timer to 64
[ 0.149075] pci 0000:00:1c.3: setting latency timer to 64
[ 0.149085] pci 0000:00:1e.0: setting latency timer to 64
[ 0.149104] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.149107] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.149110] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.149113] pci_bus 0000:02: resource 1 [mem 0xa0100000-0xa01fffff]
[ 0.149116] pci_bus 0000:02: resource 2 [mem 0x80100000-0x802fffff 64bit pref]
[ 0.149119] pci_bus 0000:03: resource 0 [io 0x2000-0x3fff]
[ 0.149122] pci_bus 0000:03: resource 1 [mem 0xa2000000-0xa3ffffff]
[ 0.149125] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.149129] pci_bus 0000:0b: resource 0 [io 0x4000-0x5fff]
[ 0.149131] pci_bus 0000:0b: resource 1 [mem 0xa4000000-0xa5ffffff]
[ 0.149135] pci_bus 0000:0b: resource 2 [mem 0xb0100000-0xb01fffff 64bit pref]
[ 0.149138] pci_bus 0000:13: resource 0 [io 0x6000-0x7fff]
[ 0.149141] pci_bus 0000:13: resource 1 [mem 0xa6000000-0xa7ffffff]
[ 0.149144] pci_bus 0000:13: resource 2 [mem 0xd0100000-0xd01fffff 64bit pref]
[ 0.149147] pci_bus 0000:14: resource 0 [io 0x8000-0xbfff]
[ 0.149150] pci_bus 0000:14: resource 1 [mem 0xa8000000-0xb00fffff]
[ 0.149153] pci_bus 0000:14: resource 2 [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.149156] pci_bus 0000:14: resource 4 [io 0x0000-0xffff]
[ 0.149159] pci_bus 0000:14: resource 5 [mem 0x00000000-0xffffffff]
[ 0.149162] pci_bus 0000:15: resource 0 [io 0x8400-0x84ff]
[ 0.149165] pci_bus 0000:15: resource 1 [io 0x8000-0x80ff]
[ 0.149168] pci_bus 0000:15: resource 2 [mem 0xd8000000-0xdbffffff pref]
[ 0.149171] pci_bus 0000:15: resource 3 [mem 0xa8000000-0xabffffff]
[ 0.149209] NET: Registered protocol family 2
[ 0.152176] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.152417] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.153245] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.153795] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.153799] TCP reno registered
[ 0.153804] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.153823] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.153974] NET: Registered protocol family 1
[ 0.153997] pci 0000:00:02.0: Boot video device
[ 0.154025] pci 0000:00:1d.0: power state changed by ACPI to D0
[ 0.154029] pci 0000:00:1d.0: power state changed by ACPI to D0
[ 0.154063] pci 0000:00:1d.1: power state changed by ACPI to D0
[ 0.154067] pci 0000:00:1d.1: power state changed by ACPI to D0
[ 0.154162] pci 0000:00:1d.7: power state changed by ACPI to D0
[ 0.154168] pci 0000:00:1d.7: power state changed by ACPI to D0
[ 0.154235] PCI: CLS 32 bytes, default 64
[ 0.154316] Unpacking initramfs...
[ 0.494848] Freeing initrd memory: 9972k freed
[ 0.503007] Simple Boot Flag at 0x35 set to 0x1
[ 0.503491] audit: initializing netlink socket (disabled)
[ 0.503512] type=2000 audit(1421040560.500:1): initialized
[ 0.518493] highmem bounce pool size: 64 pages
[ 0.518499] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.519014] VFS: Disk quotas dquot_6.5.2
[ 0.519046] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.519125] msgmni has been set to 1735
[ 0.519304] alg: No test for stdrng (krng)
[ 0.519329] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.519335] io scheduler noop registered
[ 0.519337] io scheduler deadline registered
[ 0.519345] io scheduler cfq registered (default)
[ 0.519449] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.519511] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.519598] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.519648] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.519730] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.519780] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.519862] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.519913] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.520047] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.520073] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.520076] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.520312] acpiphp: Slot [1] registered
[ 0.520354] acpiphp: Slot [1-1] registered
[ 0.520500] intel_idle: does not run on family 6 model 13
[ 0.520533] ERST: Table is not found!
[ 0.520535] GHES: HEST is not enabled!
[ 0.520552] isapnp: Scanning for PnP cards...
[ 0.874619] isapnp: No Plug & Play device found
[ 0.874691] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.875190] Linux agpgart interface v0.103
[ 0.875292] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[ 0.875320] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 0.876110] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.876247] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 0.876443] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.887018] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.887027] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.887169] mousedev: PS/2 mouse device common for all mice
[ 0.887224] rtc_cmos 00:06: RTC can wake from S4
[ 0.887347] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.887379] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.887392] cpuidle: using governor ladder
[ 0.887394] cpuidle: using governor menu
[ 0.887631] TCP cubic registered
[ 0.887655] NET: Registered protocol family 10
[ 0.888177] Mobile IPv6
[ 0.888180] NET: Registered protocol family 17
[ 0.888186] Registering the dns_resolver key type
[ 0.888208] Using IPI No-Shortcut mode
[ 0.888302] PM: Hibernation image not present or could not be loaded.
[ 0.888314] registered taskstats version 1
[ 0.888916] rtc_cmos 00:06: setting system clock to 2015-01-12 05:29:21 UTC (1421040561)
[ 0.888982] Initializing network drop monitor service
[ 0.889087] Freeing unused kernel memory: 420k freed
[ 0.889288] Write protecting the kernel text: 2860k
[ 0.889323] Write protecting the kernel read-only data: 1084k
[ 0.889325] NX-protecting the kernel data: 3284k
[ 0.893012] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.908160] udevd[44]: starting version 175
[ 0.971370] usbcore: registered new interface driver usbfs
[ 0.971401] usbcore: registered new interface driver hub
[ 0.975876] SCSI subsystem initialized
[ 1.021391] tg3.c:v3.121 (November 2, 2011)
[ 1.021424] tg3 0000:02:00.0: setting latency timer to 64
[ 1.030182] usbcore: registered new device driver usb
[ 1.030675] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.030710] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 1.030716] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 1.030750] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.030754] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.030785] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.030818] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.034695] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.036214] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.036218] ACPI: Thermal Zone [THM0] (47 C)
[ 1.068909] sdhci: Secure Digital Host Controller Interface driver
[ 1.068913] sdhci: Copyright(c) Pierre Ossman
[ 1.077386] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.106743] libata version 3.00 loaded.
[ 1.109927] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xa0004000
[ 1.132203] firewire_ohci: Added fw-ohci device 0000:14:00.1, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11
[ 1.132449] sdhci-pci 0000:14:00.2: SDHCI controller found [1180:0822] (rev 17)
[ 1.133493] sdhci-pci 0000:14:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.133516] mmc0: no vmmc regulator found
[ 1.134546] Registered led device: mmc0::
[ 1.136736] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.136791] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.136794] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.136798] usb usb1: Product: EHCI Host Controller
[ 1.136800] usb usb1: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
[ 1.136803] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.136932] hub 1-0:1.0: USB hub found
[ 1.136937] hub 1-0:1.0: 8 ports detected
[ 1.137046] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 1.137050] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 1.137066] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.137070] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.137082] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.137120] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
[ 1.137156] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.137159] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.137162] usb usb2: Product: UHCI Host Controller
[ 1.137165] usb usb2: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 1.137167] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.137279] hub 2-0:1.0: USB hub found
[ 1.137283] hub 2-0:1.0: 2 ports detected
[ 1.137355] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 1.137359] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 1.137372] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.137376] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.137384] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.137408] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
[ 1.137443] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.137446] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.137449] usb usb3: Product: UHCI Host Controller
[ 1.137451] usb usb3: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 1.137454] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.137568] hub 3-0:1.0: USB hub found
[ 1.137573] hub 3-0:1.0: 2 ports detected
[ 1.137652] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.137656] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.137665] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.137691] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.137725] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.137728] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.137731] usb usb4: Product: UHCI Host Controller
[ 1.137734] usb usb4: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 1.137736] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.137855] hub 4-0:1.0: USB hub found
[ 1.137859] hub 4-0:1.0: 2 ports detected
[ 1.137941] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.137945] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.137953] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.137980] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
[ 1.138013] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.138017] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.138020] usb usb5: Product: UHCI Host Controller
[ 1.138022] usb usb5: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 1.138025] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.138138] hub 5-0:1.0: USB hub found
[ 1.138143] hub 5-0:1.0: 2 ports detected
[ 1.138214] ahci 0000:00:1f.2: version 3.0
[ 1.138236] ahci: probe of 0000:00:1f.2 failed with error -22
[ 1.138775] ata_piix 0000:00:1f.2: version 2.13
[ 1.138788] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.140924] mmc0: SDHCI controller on PCI [0000:14:00.2] using DMA
[ 1.155324] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95751M) rev 4101] (PCI Express) MAC address xx:xx:xx:xx:xx:xx
[ 1.155330] tg3 0000:02:00.0: eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 1.155334] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.155338] tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.292035] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.292599] scsi0 : ata_piix
[ 1.292742] scsi1 : ata_piix
[ 1.293310] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 1.293314] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 1.525985] ata1.00: ATA-7: HTS541080G9SA00, MB4IC60H, max UDMA/100
[ 1.525989] ata1.00: 156301488 sectors, multi 16: LBA48
[ 1.526058] Refined TSC clocksource calibration: 1994.999 MHz.
[ 1.526063] Switching to clocksource tsc
[ 1.526134] ata2.00: ATAPI: MATSHITADVD-RAM UJ-832, 1.00, max UDMA/33
[ 1.618487] ata1.00: configured for UDMA/100
[ 1.618580] ata2.00: configured for UDMA/33
[ 1.649654] firewire_core: created device fw0: GUID 00061b002020b01b, S400
[ 1.678820] scsi 0:0:0:0: Direct-Access ATA HTS541080G9SA00 MB4I PQ: 0 ANSI: 5
[ 1.726049] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-832 1.00 PQ: 0 ANSI: 5
[ 1.733916] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.733971] sd 0:0:0:0: [sda] Write Protect is off
[ 1.733975] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.733998] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.735498] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.735501] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.735822] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.817704] sda: sda1 sda2
[ 1.997188] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[ 2.342231] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.552913] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.552989] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.580733] usb 4-2: New USB device found, idVendor=0483, idProduct=2016
[ 2.580737] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.580740] usb 4-2: Product: Biometric Coprocessor
[ 2.580743] usb 4-2: Manufacturer: STMicroelectronics
[ 3.528894] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[ 3.532101] platform microcode: firmware: agent loaded intel-ucode/06-0d-08 into memory
[ 3.532368] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 3.542284] PM: Starting manual resume from disk
[ 3.542288] PM: Hibernation image partition 8:2 present
[ 3.542290] PM: Looking for hibernation image.
[ 3.542539] PM: Image not found (code -22)
[ 3.542542] PM: Hibernation image not present or could not be loaded.
[ 3.612467] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.691675] udevd[329]: starting version 175
[ 6.213477] ACPI: Requesting acpi_cpufreq
[ 6.214305] Marking TSC unstable due to TSC halts in idle
[ 6.214319] ACPI: acpi_idle registered with cpuidle
[ 6.216018] Switching to clocksource hpet
[ 6.264638] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 6.265390] ACPI: Lid Switch [LID]
[ 6.265457] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 6.265463] ACPI: Sleep Button [SLPB]
[ 6.265539] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 6.265543] ACPI: Power Button [PWRF]
[ 6.281945] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 6.281956] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 6.285452] intel_rng: FWH not detected
[ 6.517939] Non-volatile memory driver v1.3
[ 6.547692] NET: Registered protocol family 23
[ 6.611917] iTCO_vendor_support: vendor-support=0
[ 6.613614] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 6.613729] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 6.614410] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.632909] yenta_cardbus 0000:14:00.0: CardBus bridge found [1014:056c]
[ 6.760810] yenta_cardbus 0000:14:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
[ 6.760816] yenta_cardbus 0000:14:00.0: Socket status: 30000006
[ 6.760823] yenta_cardbus 0000:14:00.0: pcmcia: parent PCI bridge window: [io 0x8000-0xbfff]
[ 6.760826] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x8000-0xbfff: excluding 0x8000-0x80ff 0x8400-0x84ff
[ 6.769165] hda_intel: probe_mask set to 0x1 for device 1014:05b7
[ 6.769221] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 6.769258] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 6.783052]
[ 6.783055] yenta_cardbus 0000:14:00.0: pcmcia: parent PCI bridge window: [mem 0xa8000000-0xb00fffff]
[ 6.783060] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa8000000-0xb00fffff: excluding 0xa8000000-0xabffffff 0xb0000000-0xb07fffff
[ 6.783079] yenta_cardbus 0000:14:00.0: pcmcia: parent PCI bridge window: [mem 0xd8000000-0xdfffffff 64bit pref]
[ 6.783082] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd8000000-0xdfffffff: excluding 0xd8000000-0xdfffffff
[ 6.785486] ACPI: AC Adapter [AC] (on-line)
[ 6.795134] P-state transition latency capped at 20 uS
[ 6.819773] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 7.028305] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 7.028313] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 7.028318] thinkpad_acpi: ThinkPad BIOS 77ET64WW (1.24 ), EC 77HT58WW-1.18
[ 7.028324] thinkpad_acpi: IBM ThinkPad Z60t, model 251247J
[ 7.029102] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 7.031429] thinkpad_acpi: radio switch found; radios are enabled
[ 7.142581] nsc-ircc 00:09: [io 0x02f8-0x02ff]
[ 7.142695] nsc-ircc 00:09: [irq 3]
[ 7.142704] nsc-ircc 00:09: [dma 1]
[ 7.143516] nsc-ircc 00:09: activated
[ 7.143562] nsc-ircc, chip->init
[ 7.143578] nsc-ircc, Found chip at base=0x164e
[ 7.143617] nsc-ircc, driver loaded (Dag Brattli)
[ 7.151603] IrDA: Registered device irda0
[ 7.151611] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
[ 7.164530] cfg80211: Calling CRDA to update world regulatory domain
[ 7.203537] [drm] Initialized drm 1.1.0 20060810
[ 7.799247] ACPI: Battery Slot [BAT0] (battery present)
[ 7.803951] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 7.806044] Registered led device: tpacpi::thinklight
[ 7.806142] Registered led device: tpacpi::power
[ 7.806200] Registered led device: tpacpi::standby
[ 7.806255] Registered led device: tpacpi::thinkvantage
[ 7.828773] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 7.841613] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[ 7.944776] Error: Driver 'pcspkr' is already registered, aborting...
[ 7.968464] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x377
[ 7.970354] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 7.971166] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 7.971831] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 7.972677] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xdc000-0xfffff
[ 7.972761] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa01fffff
[ 7.972850] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 7.972927] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 8.171512] ath5k 0000:13:00.0: setting latency timer to 64
[ 8.171583] ath5k 0000:13:00.0: registered as 'phy0'
[ 8.682414] i915 0000:00:02.0: power state changed by ACPI to D0
[ 8.682426] i915 0000:00:02.0: power state changed by ACPI to D0
[ 8.683198] i915 0000:00:02.0: setting latency timer to 64
[ 8.686100] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.686108] [drm] Driver supports precise vblank timestamp query.
[ 8.686265] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 8.718623] ath: EEPROM regdomain: 0x43
[ 8.718629] ath: EEPROM indicates we should expect a direct regpair map
[ 8.718637] ath: Country alpha2 being used: JP
[ 8.718642] ath: Regpair used: 0x43
[ 8.758156] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 8.760125] Registered led device: ath5k-phy0::rx
[ 8.760188] Registered led device: ath5k-phy0::tx
[ 8.760215] ath5k phy0: Atheros AR5414 chip found (MAC: 0xa3, PHY: 0x61)
[ 8.941686] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000/0x0
[ 8.941702] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 8.990338] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 9.024056] [drm] initialized overlay support
[ 9.296811] fbcon: inteldrmfb (fb0) is primary device
[ 9.401530] Console: switching to colour frame buffer device 160x48
[ 9.415990] fb0: inteldrmfb frame buffer device
[ 9.415996] drm: registered panic notifier
[ 9.416193] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 13.878501] Adding 1002492k swap on /dev/sda2. Priority:-1 extents:1 across:1002492k
[ 13.909839] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 14.178461] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 14.308337] loop: module loaded
[ 16.137399] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 16.392244] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9
[ 17.976444] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.645854] tg3 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex
[ 20.645864] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX
[ 20.646277] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 20.988877] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input10
[ 31.328031] eth0: no IPv6 routers present
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment