Created
May 26, 2014 06:11
-
-
Save tomari/137224e37e1b12dd76cc to your computer and use it in GitHub Desktop.
TOSHIBA EQUIUM 5170
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| processor : 0 | |
| vendor_id : GenuineIntel | |
| cpu family : 15 | |
| model : 6 | |
| model name : Intel(R) Pentium(R) D CPU 3.40GHz | |
| stepping : 5 | |
| cpu MHz : 2400.000 | |
| cache size : 2048 KB | |
| physical id : 0 | |
| siblings : 2 | |
| core id : 0 | |
| cpu cores : 2 | |
| apicid : 0 | |
| initial apicid : 0 | |
| fpu : yes | |
| fpu_exception : yes | |
| cpuid level : 6 | |
| wp : yes | |
| flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts pni dtes64 monitor ds_cpl est cid cx16 xtpr pdcm lahf_lm | |
| bogomips : 6783.46 | |
| clflush size : 64 | |
| cache_alignment : 128 | |
| address sizes : 36 bits physical, 48 bits virtual | |
| power management: | |
| processor : 1 | |
| vendor_id : GenuineIntel | |
| cpu family : 15 | |
| model : 6 | |
| model name : Intel(R) Pentium(R) D CPU 3.40GHz | |
| stepping : 5 | |
| cpu MHz : 2400.000 | |
| cache size : 2048 KB | |
| physical id : 0 | |
| siblings : 2 | |
| core id : 1 | |
| cpu cores : 2 | |
| apicid : 1 | |
| initial apicid : 1 | |
| fpu : yes | |
| fpu_exception : yes | |
| cpuid level : 6 | |
| wp : yes | |
| flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts pni dtes64 monitor ds_cpl est cid cx16 xtpr pdcm lahf_lm | |
| bogomips : 6783.46 | |
| clflush size : 64 | |
| cache_alignment : 128 | |
| address sizes : 36 bits physical, 48 bits virtual | |
| power management: | |
| -[0000:00]-+-00.0 Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] | |
| +-02.0 Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] | |
| +-02.1 Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2776] | |
| +-1b.0 Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] | |
| +-1d.0 Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] | |
| +-1d.1 Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] | |
| +-1d.2 Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] | |
| +-1d.3 Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] | |
| +-1d.7 Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] | |
| +-1e.0-[01-05]--+-05.0 Ricoh Co Ltd RL5c476 II [1180:0476] | |
| | +-05.1 Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] | |
| | +-05.2 Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] | |
| | +-05.3 Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] | |
| | \-06.0 Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet [10ec:8167] | |
| +-1f.0 Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] | |
| +-1f.2 Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] [8086:27c0] | |
| \-1f.3 Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] | |
| # dmidecode 2.12 | |
| SMBIOS 2.4 present. | |
| 37 structures occupying 1185 bytes. | |
| Table at 0x000F0000. | |
| Handle 0x0000, DMI type 0, 24 bytes | |
| BIOS Information | |
| Vendor: Phoenix Technologies, LTD | |
| Version: IJH9STS | |
| Release Date: 08/03/2007 | |
| Address: 0xE0000 | |
| Runtime Size: 128 kB | |
| ROM Size: 512 kB | |
| Characteristics: | |
| ISA is supported | |
| PCI is supported | |
| PNP is supported | |
| APM is supported | |
| BIOS is upgradeable | |
| BIOS shadowing is allowed | |
| Boot from CD is supported | |
| Selectable boot is supported | |
| BIOS ROM is socketed | |
| EDD is supported | |
| 5.25"/360 kB floppy services are supported (int 13h) | |
| 5.25"/1.2 MB floppy services are supported (int 13h) | |
| 3.5"/720 kB floppy services are supported (int 13h) | |
| 3.5"/2.88 MB floppy services are supported (int 13h) | |
| Print screen service is supported (int 5h) | |
| 8042 keyboard services are supported (int 9h) | |
| Serial services are supported (int 14h) | |
| Printer services are supported (int 17h) | |
| CGA/mono video services are supported (int 10h) | |
| ACPI is supported | |
| USB legacy is supported | |
| LS-120 boot is supported | |
| ATAPI Zip drive boot is supported | |
| BIOS boot specification is supported | |
| Function key-initiated network boot is supported | |
| Handle 0x0001, DMI type 1, 27 bytes | |
| System Information | |
| Manufacturer: TOSHIBA | |
| Product Name: EQUIUM 5170 | |
| Version: PE51734PNN815 ,PCD017JA0141 | |
| Serial Number: xxxxxxxxx | |
| UUID: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx | |
| Wake-up Type: Power Switch | |
| SKU Number: | |
| Family: | |
| Handle 0x0002, DMI type 2, 8 bytes | |
| Base Board Information | |
| Manufacturer: First International Computer, Inc. | |
| Product Name: PTM945T LF | |
| Version: 1.x | |
| Serial Number: Serial number xxxxxx | |
| Handle 0x0003, DMI type 3, 17 bytes | |
| Chassis Information | |
| Manufacturer: | |
| Type: Desktop | |
| Lock: Not Present | |
| Version: | |
| Serial Number: | |
| Asset Tag: | |
| Boot-up State: Unknown | |
| Power Supply State: Unknown | |
| Thermal State: Unknown | |
| Security Status: Unknown | |
| OEM Information: 0x00000000 | |
| Handle 0x0004, DMI type 4, 35 bytes | |
| Processor Information | |
| Socket Designation: Socket 775 | |
| Type: Central Processor | |
| Family: Pentium D | |
| Manufacturer: Intel | |
| ID: 65 0F 00 00 FF FB EB BF | |
| Signature: Type 0, Family 15, Model 6, Stepping 5 | |
| Flags: | |
| FPU (Floating-point unit on-chip) | |
| VME (Virtual mode extension) | |
| DE (Debugging extension) | |
| PSE (Page size extension) | |
| TSC (Time stamp counter) | |
| MSR (Model specific registers) | |
| PAE (Physical address extension) | |
| MCE (Machine check exception) | |
| CX8 (CMPXCHG8 instruction supported) | |
| APIC (On-chip APIC hardware supported) | |
| SEP (Fast system call) | |
| MTRR (Memory type range registers) | |
| PGE (Page global enable) | |
| MCA (Machine check architecture) | |
| CMOV (Conditional move instruction supported) | |
| PAT (Page attribute table) | |
| PSE-36 (36-bit page size extension) | |
| CLFSH (CLFLUSH instruction supported) | |
| DS (Debug store) | |
| ACPI (ACPI supported) | |
| MMX (MMX technology supported) | |
| FXSR (FXSAVE and FXSTOR instructions supported) | |
| SSE (Streaming SIMD extensions) | |
| SSE2 (Streaming SIMD extensions 2) | |
| SS (Self-snoop) | |
| HTT (Multi-threading) | |
| TM (Thermal monitor supported) | |
| PBE (Pending break enabled) | |
| Version: Intel(R) Pentium(R) D | |
| Voltage: 1.2 V | |
| External Clock: 200 MHz | |
| Max Speed: 3066 MHz | |
| Current Speed: 3400 MHz | |
| Status: Populated, Enabled | |
| Upgrade: Other | |
| L1 Cache Handle: 0x000A | |
| L2 Cache Handle: 0x000B | |
| L3 Cache Handle: Not Provided | |
| Serial Number: | |
| Asset Tag: | |
| Part Number: | |
| Handle 0x0005, DMI type 5, 24 bytes | |
| Memory Controller Information | |
| Error Detecting Method: 8-bit Parity | |
| Error Correcting Capabilities: | |
| None | |
| Supported Interleave: One-way Interleave | |
| Current Interleave: One-way Interleave | |
| Maximum Memory Module Size: 1024 MB | |
| Maximum Total Memory Size: 4096 MB | |
| Supported Speeds: | |
| Other | |
| Supported Memory Types: | |
| Other | |
| Memory Module Voltage: 5.0 V | |
| Associated Memory Slots: 4 | |
| 0x0006 | |
| 0x0007 | |
| 0x0008 | |
| 0x0009 | |
| Enabled Error Correcting Capabilities: | |
| None | |
| Handle 0x0006, DMI type 6, 12 bytes | |
| Memory Module Information | |
| Socket Designation: A0 | |
| Bank Connections: 0 | |
| Current Speed: Unknown | |
| Type: Other | |
| Installed Size: 512 MB (Single-bank Connection) | |
| Enabled Size: 512 MB (Single-bank Connection) | |
| Error Status: OK | |
| Handle 0x0007, DMI type 6, 12 bytes | |
| Memory Module Information | |
| Socket Designation: A1 | |
| Bank Connections: 2 3 | |
| Current Speed: Unknown | |
| Type: Other | |
| Installed Size: 1024 MB (Double-bank Connection) | |
| Enabled Size: 1024 MB (Double-bank Connection) | |
| Error Status: OK | |
| Handle 0x0008, DMI type 6, 12 bytes | |
| Memory Module Information | |
| Socket Designation: A2 | |
| Bank Connections: 4 | |
| Current Speed: Unknown | |
| Type: Other | |
| Installed Size: 512 MB (Single-bank Connection) | |
| Enabled Size: 512 MB (Single-bank Connection) | |
| Error Status: OK | |
| Handle 0x0009, DMI type 6, 12 bytes | |
| Memory Module Information | |
| Socket Designation: A3 | |
| Bank Connections: 6 7 | |
| Current Speed: Unknown | |
| Type: Other | |
| Installed Size: 1024 MB (Double-bank Connection) | |
| Enabled Size: 1024 MB (Double-bank Connection) | |
| Error Status: OK | |
| Handle 0x000A, DMI type 7, 19 bytes | |
| Cache Information | |
| Socket Designation: Internal Cache | |
| Configuration: Enabled, Not Socketed, Level 1 | |
| Operational Mode: Write Back | |
| Location: Internal | |
| Installed Size: 32 kB | |
| Maximum Size: 32 kB | |
| Supported SRAM Types: | |
| Synchronous | |
| Installed SRAM Type: Synchronous | |
| Speed: Unknown | |
| Error Correction Type: Unknown | |
| System Type: Unknown | |
| Associativity: Unknown | |
| Handle 0x000B, DMI type 7, 19 bytes | |
| Cache Information | |
| Socket Designation: External Cache | |
| Configuration: Enabled, Not Socketed, Level 2 | |
| Operational Mode: Write Back | |
| Location: External | |
| Installed Size: 2048 kB | |
| Maximum Size: 2048 kB | |
| Supported SRAM Types: | |
| Synchronous | |
| Installed SRAM Type: Synchronous | |
| Speed: Unknown | |
| Error Correction Type: Unknown | |
| System Type: Unknown | |
| Associativity: Unknown | |
| Handle 0x000C, DMI type 8, 9 bytes | |
| Port Connector Information | |
| Internal Reference Designator: PRIMARY IDE | |
| Internal Connector Type: On Board IDE | |
| External Reference Designator: Not Specified | |
| External Connector Type: None | |
| Port Type: Other | |
| Handle 0x000D, DMI type 8, 9 bytes | |
| Port Connector Information | |
| Internal Reference Designator: SECONDARY IDE | |
| Internal Connector Type: On Board IDE | |
| External Reference Designator: Not Specified | |
| External Connector Type: None | |
| Port Type: Other | |
| Handle 0x000E, DMI type 8, 9 bytes | |
| Port Connector Information | |
| Internal Reference Designator: FDD | |
| Internal Connector Type: On Board Floppy | |
| External Reference Designator: Not Specified | |
| External Connector Type: None | |
| Port Type: 8251 FIFO Compatible | |
| Handle 0x000F, DMI type 8, 9 bytes | |
| Port Connector Information | |
| Internal Reference Designator: COM1 | |
| Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) | |
| External Reference Designator: | |
| External Connector Type: DB-9 male | |
| Port Type: Serial Port 16450 Compatible | |
| Handle 0x0010, DMI type 8, 9 bytes | |
| Port Connector Information | |
| Internal Reference Designator: COM2 | |
| Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) | |
| External Reference Designator: | |
| External Connector Type: DB-9 male | |
| Port Type: Serial Port 16450 Compatible | |
| Handle 0x0011, DMI type 8, 9 bytes | |
| Port Connector Information | |
| Internal Reference Designator: LPT1 | |
| Internal Connector Type: DB-25 female | |
| External Reference Designator: | |
| External Connector Type: DB-25 female | |
| Port Type: Parallel Port ECP/EPP | |
| Handle 0x0012, DMI type 8, 9 bytes | |
| Port Connector Information | |
| Internal Reference Designator: Keyboard | |
| Internal Connector Type: PS/2 | |
| External Reference Designator: | |
| External Connector Type: PS/2 | |
| Port Type: Keyboard Port | |
| Handle 0x0013, DMI type 8, 9 bytes | |
| Port Connector Information | |
| Internal Reference Designator: PS/2 Mouse | |
| Internal Connector Type: PS/2 | |
| External Reference Designator: | |
| External Connector Type: PS/2 | |
| Port Type: Mouse Port | |
| Handle 0x0014, DMI type 8, 9 bytes | |
| Port Connector Information | |
| Internal Reference Designator: Not Specified | |
| Internal Connector Type: None | |
| External Reference Designator: USB0 | |
| External Connector Type: Other | |
| Port Type: USB | |
| Handle 0x0015, DMI type 8, 9 bytes | |
| Port Connector Information | |
| Internal Reference Designator: Not Specified | |
| Internal Connector Type: None | |
| External Reference Designator: USB1 | |
| External Connector Type: Other | |
| Port Type: USB | |
| Handle 0x0016, DMI type 9, 13 bytes | |
| System Slot Information | |
| Designation: PCI0 | |
| Type: 32-bit PCI | |
| Current Usage: In Use | |
| Length: Long | |
| ID: 1 | |
| Characteristics: | |
| 5.0 V is provided | |
| PME signal is supported | |
| Handle 0x0017, DMI type 9, 13 bytes | |
| System Slot Information | |
| Designation: PCI1 | |
| Type: 32-bit PCI | |
| Current Usage: Available | |
| Length: Long | |
| ID: 2 | |
| Characteristics: | |
| 5.0 V is provided | |
| PME signal is supported | |
| Handle 0x0018, DMI type 13, 22 bytes | |
| BIOS Language Information | |
| Language Description Format: Long | |
| Installable Languages: 3 | |
| n|US|iso8859-1 | |
| n|US|iso8859-1 | |
| r|CA|iso8859-1 | |
| Currently Installed Language: n|US|iso8859-1 | |
| Handle 0x0019, DMI type 16, 15 bytes | |
| Physical Memory Array | |
| Location: System Board Or Motherboard | |
| Use: System Memory | |
| Error Correction Type: None | |
| Maximum Capacity: 4 GB | |
| Error Information Handle: Not Provided | |
| Number Of Devices: 4 | |
| Handle 0x001A, DMI type 17, 27 bytes | |
| Memory Device | |
| Array Handle: 0x0019 | |
| Error Information Handle: Not Provided | |
| Total Width: 64 bits | |
| Data Width: 64 bits | |
| Size: 512 MB | |
| Form Factor: DIMM | |
| Set: None | |
| Locator: A0 | |
| Bank Locator: Bank0/1 | |
| Type: DDR2 | |
| Type Detail: Synchronous | |
| Speed: Unknown | |
| Manufacturer: None | |
| Serial Number: None | |
| Asset Tag: None | |
| Part Number: None | |
| Handle 0x001B, DMI type 17, 27 bytes | |
| Memory Device | |
| Array Handle: 0x0019 | |
| Error Information Handle: Not Provided | |
| Total Width: 64 bits | |
| Data Width: 64 bits | |
| Size: 1024 MB | |
| Form Factor: DIMM | |
| Set: None | |
| Locator: A1 | |
| Bank Locator: Bank2/3 | |
| Type: DDR2 | |
| Type Detail: Synchronous | |
| Speed: Unknown | |
| Manufacturer: None | |
| Serial Number: None | |
| Asset Tag: None | |
| Part Number: None | |
| Handle 0x001C, DMI type 17, 27 bytes | |
| Memory Device | |
| Array Handle: 0x0019 | |
| Error Information Handle: Not Provided | |
| Total Width: 64 bits | |
| Data Width: 64 bits | |
| Size: 512 MB | |
| Form Factor: DIMM | |
| Set: None | |
| Locator: A2 | |
| Bank Locator: Bank4/5 | |
| Type: DDR2 | |
| Type Detail: Synchronous | |
| Speed: Unknown | |
| Manufacturer: None | |
| Serial Number: None | |
| Asset Tag: None | |
| Part Number: None | |
| Handle 0x001D, DMI type 17, 27 bytes | |
| Memory Device | |
| Array Handle: 0x0019 | |
| Error Information Handle: Not Provided | |
| Total Width: 64 bits | |
| Data Width: 64 bits | |
| Size: 1024 MB | |
| Form Factor: DIMM | |
| Set: None | |
| Locator: A3 | |
| Bank Locator: Bank6/7 | |
| Type: DDR2 | |
| Type Detail: Synchronous | |
| Speed: Unknown | |
| Manufacturer: None | |
| Serial Number: None | |
| Asset Tag: None | |
| Part Number: None | |
| Handle 0x001E, DMI type 19, 15 bytes | |
| Memory Array Mapped Address | |
| Starting Address: 0x00000000000 | |
| Ending Address: 0x000BFFFFFFF | |
| Range Size: 3 GB | |
| Physical Array Handle: 0x0019 | |
| Partition Width: 1 | |
| Handle 0x001F, DMI type 20, 19 bytes | |
| Memory Device Mapped Address | |
| Starting Address: 0x00000000000 | |
| Ending Address: 0x0001FFFFFFF | |
| Range Size: 512 MB | |
| Physical Device Handle: 0x001A | |
| Memory Array Mapped Address Handle: 0x001E | |
| Partition Row Position: 1 | |
| Handle 0x0020, DMI type 20, 19 bytes | |
| Memory Device Mapped Address | |
| Starting Address: 0x00020000000 | |
| Ending Address: 0x0005FFFFFFF | |
| Range Size: 1 GB | |
| Physical Device Handle: 0x001B | |
| Memory Array Mapped Address Handle: 0x001E | |
| Partition Row Position: 1 | |
| Handle 0x0021, DMI type 20, 19 bytes | |
| Memory Device Mapped Address | |
| Starting Address: 0x00060000000 | |
| Ending Address: 0x0007FFFFFFF | |
| Range Size: 512 MB | |
| Physical Device Handle: 0x001C | |
| Memory Array Mapped Address Handle: 0x001E | |
| Partition Row Position: 1 | |
| Handle 0x0022, DMI type 20, 19 bytes | |
| Memory Device Mapped Address | |
| Starting Address: 0x00080000000 | |
| Ending Address: 0x000BFFFFFFF | |
| Range Size: 1 GB | |
| Physical Device Handle: 0x001D | |
| Memory Array Mapped Address Handle: 0x001E | |
| Partition Row Position: 1 | |
| Handle 0x0023, DMI type 32, 11 bytes | |
| System Boot Information | |
| Status: No errors detected | |
| Handle 0x0024, DMI type 127, 4 bytes | |
| End Of Table | |
| Initializing cgroup subsys cpuset | |
| Initializing cgroup subsys cpu | |
| Linux version 2.6.32-431.17.1.el6.x86_64 ([email protected]) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-4) (GCC) ) #1 SMP Wed May 7 23:32:49 UTC 2014 | |
| Command line: ro root=/dev/mapper/vg_equium1-lv_root rd_LVM_LV=vg_equium1/lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_equium1/lv_swap KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet | |
| KERNEL supported cpus: | |
| Intel GenuineIntel | |
| AMD AuthenticAMD | |
| Centaur CentaurHauls | |
| BIOS-provided physical RAM map: | |
| BIOS-e820: 0000000000000000 - 000000000009f400 (usable) | |
| BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) | |
| BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) | |
| BIOS-e820: 0000000000100000 - 00000000bf690000 (usable) | |
| BIOS-e820: 00000000bf690000 - 00000000bf6e0000 (reserved) | |
| BIOS-e820: 00000000bf6e0000 - 00000000bf6e3000 (ACPI NVS) | |
| BIOS-e820: 00000000bf6e3000 - 00000000bf6f0000 (ACPI data) | |
| BIOS-e820: 00000000bf6f0000 - 00000000bf700000 (reserved) | |
| BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) | |
| BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) | |
| DMI 2.4 present. | |
| SMBIOS version 2.4 @ 0xF0BE0 | |
| DMI: TOSHIBA EQUIUM 5170/PTM945T LF, BIOS IJH9STS 08/03/2007 | |
| Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. | |
| e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) | |
| e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) | |
| e820 remove range: 00000000000a0000 - 0000000000100000 (usable) | |
| last_pfn = 0xbf690 max_arch_pfn = 0x400000000 | |
| MTRR default type: uncachable | |
| MTRR fixed ranges enabled: | |
| 00000-9FFFF write-back | |
| A0000-BFFFF uncachable | |
| C0000-C9FFF write-protect | |
| CA000-EFFFF uncachable | |
| F0000-FFFFF write-through | |
| MTRR variable ranges enabled: | |
| 0 base 000000000 mask F80000000 write-back | |
| 1 base 080000000 mask FC0000000 write-back | |
| 2 base 0BF800000 mask FFF800000 uncachable | |
| 3 base 0BF700000 mask FFFF00000 uncachable | |
| 4 disabled | |
| 5 disabled | |
| 6 disabled | |
| 7 disabled | |
| x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 | |
| original variable MTRRs | |
| reg 0, base: 0GB, range: 2GB, type WB | |
| reg 1, base: 2GB, range: 1GB, type WB | |
| reg 2, base: 3064MB, range: 8MB, type UC | |
| reg 3, base: 3063MB, range: 1MB, type UC | |
| total RAM covered: 3063M | |
| Found optimal setting for mtrr clean up | |
| gran_size: 64K chunk_size: 16M num_reg: 4 lose cover RAM: 0G | |
| New variable MTRRs | |
| reg 0, base: 0GB, range: 2GB, type WB | |
| reg 1, base: 2GB, range: 1GB, type WB | |
| reg 2, base: 3063MB, range: 1MB, type UC | |
| reg 3, base: 3064MB, range: 8MB, type UC | |
| initial memory mapped : 0 - 20000000 | |
| init_memory_mapping: 0000000000000000-00000000bf690000 | |
| 0000000000 - 00bf600000 page 2M | |
| 00bf600000 - 00bf690000 page 4k | |
| kernel direct mapping tables up to bf690000 @ 10000-15000 | |
| RAMDISK: 370a1000 - 37feff7f | |
| ACPI: RSDP 00000000000f9210 00014 (v00 TOSFIC) | |
| ACPI: RSDT 00000000bf6e3000 00040 (v01 TOSFIC TOSFIC00 42302E31 AWRD 00000000) | |
| ACPI: FACP 00000000bf6e3080 00074 (v01 TOSFIC TOSFIC00 42302E31 AWRD 00000000) | |
| ACPI: DSDT 00000000bf6e3100 0463D (v01 TOSFIC TOSFIC00 00001000 MSFT 03000000) | |
| ACPI: FACS 00000000bf6e0000 00040 | |
| ACPI: SLIC 00000000bf6e7740 00176 (v01 TOSFIC TOSFIC00 42302E31 AWRD 00000000) | |
| ACPI: HPET 00000000bf6e79c0 00038 (v01 TOSFIC TOSFIC00 42302E31 AWRD 00000098) | |
| ACPI: WDRT 00000000bf6e7a00 00047 (v01 TOSFIC TOSFIC00 42302E31 AWRD 00000000) | |
| ACPI: MCFG 00000000bf6e7a80 0003C (v01 TOSFIC TOSFIC00 42302E31 AWRD 00000000) | |
| ACPI: APIC 00000000bf6e78c0 00084 (v01 TOSFIC TOSFIC00 42302E31 AWRD 00000000) | |
| ACPI: SSDT 00000000bf6e8120 00380 (v01 TOSFIC CpuPm 00003000 INTL 20061109) | |
| ACPI: Local APIC address 0xfee00000 | |
| Setting APIC routing to flat. | |
| No NUMA configuration found | |
| Faking a node at 0000000000000000-00000000bf690000 | |
| Bootmem setup node 0 0000000000000000-00000000bf690000 | |
| NODE_DATA [0000000000013000 - 0000000000046fff] | |
| bootmap [0000000000047000 - 000000000005eed7] pages 18 | |
| (7 early reservations) ==> bootmem [0000000000 - 00bf690000] | |
| #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] | |
| #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] | |
| #2 [0001000000 - 0002020aa4] TEXT DATA BSS ==> [0001000000 - 0002020aa4] | |
| #3 [00370a1000 - 0037feff7f] RAMDISK ==> [00370a1000 - 0037feff7f] | |
| #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] | |
| #5 [0002021000 - 0002021102] BRK ==> [0002021000 - 0002021102] | |
| #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] | |
| found SMP MP-table at [ffff8800000f4f80] f4f80 | |
| Reserving 129MB of memory at 48MB for crashkernel (System RAM: 3062MB) | |
| [ffffea0000000000-ffffea00009fffff] PMD -> [ffff880002600000-ffff880002ffffff] on node 0 | |
| [ffffea0000a00000-ffffea00029fffff] PMD -> [ffff88000b200000-ffff88000d1fffff] on node 0 | |
| Zone PFN ranges: | |
| DMA 0x00000010 -> 0x00001000 | |
| DMA32 0x00001000 -> 0x00100000 | |
| Normal 0x00100000 -> 0x00100000 | |
| Movable zone start PFN for each node | |
| early_node_map[2] active PFN ranges | |
| 0: 0x00000010 -> 0x0000009f | |
| 0: 0x00000100 -> 0x000bf690 | |
| On node 0 totalpages: 783903 | |
| DMA zone: 56 pages used for memmap | |
| DMA zone: 103 pages reserved | |
| DMA zone: 3824 pages, LIFO batch:0 | |
| DMA32 zone: 10663 pages used for memmap | |
| DMA32 zone: 769257 pages, LIFO batch:31 | |
| ACPI: PM-Timer IO Port: 0x408 | |
| ACPI: Local APIC address 0xfee00000 | |
| Setting APIC routing to flat. | |
| ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) | |
| ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) | |
| ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) | |
| ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) | |
| ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) | |
| ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) | |
| IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 | |
| ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) | |
| ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) | |
| ACPI: IRQ0 used by override. | |
| ACPI: IRQ2 used by override. | |
| ACPI: IRQ9 used by override. | |
| Using ACPI (MADT) for SMP configuration information | |
| ACPI: HPET id: 0x8086a201 base: 0xfed00000 | |
| SMP: Allowing 4 CPUs, 2 hotplug CPUs | |
| nr_irqs_gsi: 24 | |
| PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 | |
| PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 | |
| PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 | |
| Allocating PCI resources starting at bf700000 (gap: bf700000:20900000) | |
| Booting paravirtualized kernel on bare hardware | |
| NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 | |
| PERCPU: Embedded 31 pages/cpu @ffff880002200000 s94872 r8192 d23912 u524288 | |
| pcpu-alloc: s94872 r8192 d23912 u524288 alloc=1*2097152 | |
| pcpu-alloc: [0] 0 1 2 3 | |
| Built 1 zonelists in Node order, mobility grouping on. Total pages: 773081 | |
| Policy zone: DMA32 | |
| Kernel command line: ro root=/dev/mapper/vg_equium1-lv_root rd_LVM_LV=vg_equium1/lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=129M@0M rd_LVM_LV=vg_equium1/lv_swap KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet | |
| PID hash table entries: 4096 (order: 3, 32768 bytes) | |
| Checking aperture... | |
| No AGP bridge found | |
| Memory: 2927316k/3136064k available (5326k kernel code, 452k absent, 208296k reserved, 7013k data, 1280k init) | |
| Hierarchical RCU implementation. | |
| NR_IRQS:33024 nr_irqs:440 | |
| Console: colour VGA+ 80x25 | |
| console [tty0] enabled | |
| allocated 12582912 bytes of page_cgroup | |
| please try 'cgroup_disable=memory' option if you don't want memory cgroups | |
| hpet clockevent registered | |
| Fast TSC calibration using PIT | |
| Detected 3391.731 MHz processor. | |
| Calibrating delay loop (skipped), value calculated using timer frequency.. 6783.46 BogoMIPS (lpj=3391731) | |
| pid_max: default: 32768 minimum: 301 | |
| Security Framework initialized | |
| SELinux: Initializing. | |
| SELinux: Starting in permissive mode | |
| Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) | |
| Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) | |
| Mount-cache hash table entries: 256 | |
| Initializing cgroup subsys ns | |
| Initializing cgroup subsys cpuacct | |
| Initializing cgroup subsys memory | |
| Initializing cgroup subsys devices | |
| Initializing cgroup subsys freezer | |
| Initializing cgroup subsys net_cls | |
| Initializing cgroup subsys blkio | |
| Initializing cgroup subsys perf_event | |
| Initializing cgroup subsys net_prio | |
| CPU: Physical Processor ID: 0 | |
| CPU: Processor Core ID: 0 | |
| mce: CPU supports 4 MCE banks | |
| CPU0: Thermal monitoring enabled (TM1) | |
| using mwait in idle threads. | |
| ACPI: Core revision 20090903 | |
| ftrace: converting mcount calls to 0f 1f 44 00 00 | |
| ftrace: allocating 21778 entries in 86 pages | |
| APIC routing finalized to flat. | |
| ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 | |
| CPU0: Intel(R) Pentium(R) D CPU 3.40GHz stepping 05 | |
| Performance Events: Netburst events, Netburst P4/Xeon PMU driver. | |
| ... version: 0 | |
| ... bit width: 40 | |
| ... generic registers: 18 | |
| ... value mask: 000000ffffffffff | |
| ... max period: 0000007fffffffff | |
| ... fixed-purpose events: 0 | |
| ... event mask: 000000000003ffff | |
| NMI watchdog enabled, takes one hw-pmu counter. | |
| Booting Node 0, Processors #1 | |
| Brought up 2 CPUs | |
| Total of 2 processors activated (13566.92 BogoMIPS). | |
| sizeof(vma)=200 bytes | |
| sizeof(page)=56 bytes | |
| sizeof(inode)=592 bytes | |
| sizeof(dentry)=192 bytes | |
| sizeof(ext3inode)=800 bytes | |
| sizeof(buffer_head)=104 bytes | |
| sizeof(skbuff)=232 bytes | |
| sizeof(task_struct)=2648 bytes | |
| devtmpfs: initialized | |
| PM: Registering ACPI NVS region at bf6e0000 (12288 bytes) | |
| regulator: core version 0.5 | |
| NET: Registered protocol family 16 | |
| ACPI: bus type pci registered | |
| PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support. | |
| PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 | |
| PCI: MCFG area at e0000000 reserved in E820 | |
| PCI: Using MMCONFIG at e0000000 - efffffff | |
| PCI: Using configuration type 1 for base access | |
| bio: create slab <bio-0> at 0 | |
| ACPI: EC: Look up EC in DSDT | |
| ACPI: Interpreter enabled | |
| ACPI: (supports S0 S3 S4 S5) | |
| ACPI: Using IOAPIC for interrupt routing | |
| ACPI: No dock devices found. | |
| PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug | |
| ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) | |
| pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) | |
| pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) | |
| pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) | |
| pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000cffff] (ignored) | |
| pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) | |
| pci_root PNP0A08:00: host bridge window [mem 0xbf750000-0xfebfffff] (ignored) | |
| PCI: root bus 00: using default resources | |
| PCI host bridge to bus 0000:00 | |
| pci_bus 0000:00: root bus resource [io 0x0000-0xffff] | |
| pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff] | |
| pci 0000:00:02.0: reg 10: [mem 0xfdf00000-0xfdf7ffff] | |
| pci 0000:00:02.0: reg 14: [io 0xff00-0xff07] | |
| pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref] | |
| pci 0000:00:02.0: reg 1c: [mem 0xfdf80000-0xfdfbffff] | |
| pci 0000:00:02.1: reg 10: [mem 0xfde80000-0xfdefffff] | |
| pci 0000:00:1b.0: reg 10: [mem 0xfdff8000-0xfdffbfff 64bit] | |
| pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:1b.0: PME# disabled | |
| pci 0000:00:1d.0: reg 20: [io 0xfe00-0xfe1f] | |
| pci 0000:00:1d.1: reg 20: [io 0xfd00-0xfd1f] | |
| pci 0000:00:1d.2: reg 20: [io 0xfc00-0xfc1f] | |
| pci 0000:00:1d.3: reg 20: [io 0xfb00-0xfb1f] | |
| pci 0000:00:1d.7: reg 10: [mem 0xfdfff000-0xfdfff3ff] | |
| pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:1d.7: PME# disabled | |
| pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO | |
| pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO | |
| pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) | |
| pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007) | |
| pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 0007) | |
| pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007] | |
| pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003] | |
| pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007] | |
| pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003] | |
| pci 0000:00:1f.2: reg 20: [io 0xfa00-0xfa0f] | |
| pci 0000:00:1f.2: PME# supported from D3hot | |
| pci 0000:00:1f.2: PME# disabled | |
| pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f] | |
| pci 0000:01:05.0: reg 10: [mem 0xfbfff000-0xfbffffff] | |
| pci 0000:01:05.0: supports D1 D2 | |
| pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot D3cold | |
| pci 0000:01:05.0: PME# disabled | |
| pci 0000:01:05.1: reg 10: [mem 0xfbffd000-0xfbffd7ff] | |
| pci 0000:01:05.1: PME# supported from D0 D3hot D3cold | |
| pci 0000:01:05.1: PME# disabled | |
| pci 0000:01:05.2: reg 10: [mem 0xfbffc000-0xfbffc0ff] | |
| pci 0000:01:05.2: supports D1 D2 | |
| pci 0000:01:05.2: PME# supported from D0 D1 D2 D3hot D3cold | |
| pci 0000:01:05.2: PME# disabled | |
| pci 0000:01:05.3: reg 10: [mem 0xfbffb000-0xfbffb0ff] | |
| pci 0000:01:05.3: supports D1 D2 | |
| pci 0000:01:05.3: PME# supported from D0 D1 D2 D3hot D3cold | |
| pci 0000:01:05.3: PME# disabled | |
| pci 0000:01:06.0: reg 10: [io 0xec00-0xecff] | |
| pci 0000:01:06.0: reg 14: [mem 0xfbffa000-0xfbffa0ff] | |
| pci 0000:01:06.0: reg 30: [mem 0x00000000-0x0000ffff pref] | |
| pci 0000:01:06.0: supports D1 D2 | |
| pci 0000:01:06.0: PME# supported from D1 D2 D3hot D3cold | |
| pci 0000:01:06.0: PME# disabled | |
| pci 0000:00:1e.0: PCI bridge to [bus 01-02] (subtractive decode) | |
| pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] | |
| pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xfbffffff] | |
| pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] | |
| pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) | |
| pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) | |
| pci_bus 0000:02: [bus 02-05] partially hidden behind transparent bridge 0000:01 [bus 01-02] | |
| ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] | |
| ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] | |
| pci0000:00: Requesting ACPI _OSC control (0x1d) | |
| Unable to assume _OSC PCIe control. Disabling ASPM | |
| ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 9 10 11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. | |
| ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. | |
| ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. | |
| ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15) | |
| vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none | |
| vgaarb: loaded | |
| vgaarb: bridge control possible 0000:00:02.0 | |
| SCSI subsystem initialized | |
| libata version 3.00 loaded. | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| PCI: Using ACPI for IRQ routing | |
| PCI: old code would have set cacheline size to 128 bytes, but clflush_size = 64 | |
| PCI: pci_cache_line_size set to 64 bytes | |
| NetLabel: Initializing | |
| NetLabel: domain hash size = 128 | |
| NetLabel: protocols = UNLABELED CIPSOv4 | |
| NetLabel: unlabeled traffic allowed by default | |
| HPET: 3 timers in total, 0 timers will be used for per-cpu timer | |
| hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 | |
| hpet0: 3 comparators, 64-bit 14.318180 MHz counter | |
| Switching to clocksource hpet | |
| pnp: PnP ACPI init | |
| ACPI: bus type pnp registered | |
| pnp 00:00: [io 0x0cf8-0x0cff] | |
| pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) | |
| pnp 00:01: [io 0x0010-0x001f] | |
| pnp 00:01: [io 0x0022-0x002d] | |
| pnp 00:01: [io 0x0030-0x003f] | |
| pnp 00:01: [io 0x0044-0x004d] | |
| pnp 00:01: [io 0x0050-0x005e] | |
| pnp 00:01: [io 0x0062-0x0063] | |
| pnp 00:01: [io 0x0065-0x006f] | |
| pnp 00:01: [io 0x0074-0x007f] | |
| pnp 00:01: [io 0x0091-0x0093] | |
| pnp 00:01: [io 0x00a2-0x00bf] | |
| pnp 00:01: [io 0x00e0-0x00ef] | |
| pnp 00:01: [io 0x04d0-0x04d1] | |
| pnp 00:01: [io 0x0290-0x029f] | |
| pnp 00:01: [io 0x0800-0x087f] | |
| pnp 00:01: [io 0x0290-0x0297] | |
| pnp 00:01: [io 0x0880-0x088f] | |
| pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| pnp 00:02: [dma 4] | |
| pnp 00:02: [io 0x0000-0x000f] | |
| pnp 00:02: [io 0x0080-0x0090] | |
| pnp 00:02: [io 0x0094-0x009f] | |
| pnp 00:02: [io 0x00c0-0x00df] | |
| pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) | |
| pnp 00:03: [irq 0 disabled] | |
| pnp 00:03: [irq 8] | |
| pnp 00:03: [mem 0xfed00000-0xfed003ff] | |
| pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) | |
| pnp 00:04: [io 0x0070-0x0073] | |
| pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) | |
| pnp 00:05: [io 0x0061] | |
| pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) | |
| pnp 00:06: [io 0x00f0-0x00ff] | |
| pnp 00:06: [irq 13] | |
| pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) | |
| pnp 00:07: [io 0x03f0-0x03f5] | |
| pnp 00:07: [io 0x03f7] | |
| pnp 00:07: [irq 6] | |
| pnp 00:07: [dma 2] | |
| pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) | |
| pnp 00:08: [io 0x03f8-0x03ff] | |
| pnp 00:08: [irq 4] | |
| pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) | |
| pnp 00:09: [io 0x0378-0x037f] | |
| pnp 00:09: [io 0x0778-0x077b] | |
| pnp 00:09: [irq 7] | |
| pnp 00:09: [dma 3] | |
| pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active) | |
| pnp 00:0a: [io 0x0060] | |
| pnp 00:0a: [io 0x0064] | |
| pnp 00:0a: [irq 1] | |
| pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) | |
| pnp 00:0b: [io 0x0400-0x04bf] | |
| pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| pnp 00:0c: [mem 0xffb80000-0xffbfffff] | |
| pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active) | |
| pnp 00:0d: [mem 0xe0000000-0xefffffff] | |
| pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| pnp 00:0e: [mem 0x000f0000-0x000fffff] | |
| pnp 00:0e: [mem 0xfed00000-0xfed000ff] | |
| pnp 00:0e: [mem 0x0000046e-0x0000056d] | |
| pnp 00:0e: [mem 0xbf6e0000-0xbf6fffff] | |
| pnp 00:0e: [mem 0x00000000-0x0009ffff] | |
| pnp 00:0e: [mem 0x00100000-0xbf6dffff] | |
| pnp 00:0e: [mem 0x00000000-0xffffffffffffffff disabled] | |
| pnp 00:0e: [mem 0xfec00000-0xfec00fff] | |
| pnp 00:0e: [mem 0xfed13000-0xfed1dfff] | |
| pnp 00:0e: [mem 0xfed20000-0xfed8ffff] | |
| pnp 00:0e: [mem 0xfee00000-0xfee00fff] | |
| pnp 00:0e: [mem 0xffb00000-0xffb7ffff] | |
| pnp 00:0e: [mem 0xfff00000-0xffffffff] | |
| pnp 00:0e: [mem 0x000e0000-0x000effff] | |
| pnp 00:0e: disabling [mem 0x0000046e-0x0000056d] because it overlaps 0000:01:06.0 BAR 6 [mem 0x00000000-0x0000ffff pref] | |
| pnp 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) | |
| pnp: PnP ACPI: found 15 devices | |
| ACPI: ACPI bus type pnp unregistered | |
| system 00:01: [io 0x04d0-0x04d1] has been reserved | |
| system 00:01: [io 0x0290-0x029f] has been reserved | |
| system 00:01: [io 0x0800-0x087f] has been reserved | |
| system 00:01: [io 0x0290-0x0297] has been reserved | |
| system 00:01: [io 0x0880-0x088f] has been reserved | |
| system 00:0b: [io 0x0400-0x04bf] could not be reserved | |
| system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved | |
| system 00:0e: [mem 0x000f0000-0x000fffff] could not be reserved | |
| system 00:0e: [mem 0xfed00000-0xfed000ff] has been reserved | |
| system 00:0e: [mem 0xbf6e0000-0xbf6fffff] could not be reserved | |
| system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved | |
| system 00:0e: [mem 0x00100000-0xbf6dffff] could not be reserved | |
| system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved | |
| system 00:0e: [mem 0xfed13000-0xfed1dfff] has been reserved | |
| system 00:0e: [mem 0xfed20000-0xfed8ffff] has been reserved | |
| system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved | |
| system 00:0e: [mem 0xffb00000-0xffb7ffff] has been reserved | |
| system 00:0e: [mem 0xfff00000-0xffffffff] has been reserved | |
| system 00:0e: [mem 0x000e0000-0x000effff] has been reserved | |
| PCI: max bus depth: 2 pci_try_num: 3 | |
| pci 0000:01:05.0: BAR 15: assigned [mem 0xf4000000-0xf7ffffff pref] | |
| pci 0000:01:05.0: BAR 16: assigned [mem 0xc0000000-0xc3ffffff] | |
| pci 0000:01:06.0: BAR 6: assigned [mem 0xfdd00000-0xfdd0ffff pref] | |
| pci 0000:01:05.0: BAR 13: assigned [io 0xe000-0xe0ff] | |
| pci 0000:01:05.0: BAR 14: assigned [io 0xe400-0xe4ff] | |
| pci 0000:01:05.0: CardBus bridge to [bus 02-05] | |
| pci 0000:01:05.0: bridge window [io 0xe000-0xe0ff] | |
| pci 0000:01:05.0: bridge window [io 0xe400-0xe4ff] | |
| pci 0000:01:05.0: bridge window [mem 0xf4000000-0xf7ffffff pref] | |
| pci 0000:01:05.0: bridge window [mem 0xc0000000-0xc3ffffff] | |
| pci 0000:00:1e.0: PCI bridge to [bus 01-02] | |
| pci 0000:00:1e.0: PCI bridge to [bus 01-02] | |
| pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] | |
| pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xfbffffff] | |
| pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] | |
| pci 0000:00:1e.0: setting latency timer to 64 | |
| alloc irq_desc for 19 on node -1 | |
| alloc kstat_irqs on node -1 | |
| pci 0000:01:05.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 | |
| pci 0000:01:05.0: setting latency timer to 64 | |
| pci_bus 0000:00: resource 4 [io 0x0000-0xffff] | |
| pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff] | |
| pci_bus 0000:01: resource 0 [io 0xe000-0xefff] | |
| pci_bus 0000:01: resource 1 [mem 0xf4000000-0xfbffffff] | |
| pci_bus 0000:01: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref] | |
| pci_bus 0000:01: resource 4 [io 0x0000-0xffff] | |
| pci_bus 0000:01: resource 5 [mem 0x00000000-0xfffffffff] | |
| pci_bus 0000:02: resource 0 [io 0xe000-0xe0ff] | |
| pci_bus 0000:02: resource 1 [io 0xe400-0xe4ff] | |
| pci_bus 0000:02: resource 2 [mem 0xf4000000-0xf7ffffff pref] | |
| pci_bus 0000:02: resource 3 [mem 0xc0000000-0xc3ffffff] | |
| NET: Registered protocol family 2 | |
| IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) | |
| TCP established hash table entries: 524288 (order: 11, 8388608 bytes) | |
| TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) | |
| TCP: Hash tables configured (established 524288 bind 65536) | |
| TCP reno registered | |
| NET: Registered protocol family 1 | |
| pci 0000:00:02.0: Boot video device | |
| alloc irq_desc for 23 on node -1 | |
| alloc kstat_irqs on node -1 | |
| pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 | |
| pci 0000:00:1d.0: PCI INT A disabled | |
| pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 | |
| pci 0000:00:1d.1: PCI INT B disabled | |
| alloc irq_desc for 18 on node -1 | |
| alloc kstat_irqs on node -1 | |
| pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 | |
| pci 0000:00:1d.2: PCI INT C disabled | |
| alloc irq_desc for 16 on node -1 | |
| alloc kstat_irqs on node -1 | |
| pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 | |
| pci 0000:00:1d.3: PCI INT D disabled | |
| pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 | |
| pci 0000:00:1d.7: PCI INT A disabled | |
| Trying to unpack rootfs image as initramfs... | |
| Freeing initrd memory: 15675k freed | |
| audit: initializing netlink socket (disabled) | |
| type=2000 audit(1401114883.544:1): initialized | |
| HugeTLB registered 2 MB page size, pre-allocated 0 pages | |
| VFS: Disk quotas dquot_6.5.2 | |
| Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| msgmni has been set to 5748 | |
| SELinux: Registering netfilter hooks | |
| alg: No test for stdrng (krng) | |
| ksign: Installing public key data | |
| Loading keyring | |
| - Added public key A760F53BCC8FA210 | |
| - User ID: CentOS (Kernel Module GPG key) | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) | |
| io scheduler noop registered | |
| io scheduler anticipatory registered | |
| io scheduler deadline registered | |
| io scheduler cfq registered (default) | |
| pci_hotplug: PCI Hot Plug PCI Core version: 0.5 | |
| pciehp: PCI Express Hot Plug Controller Driver version: 0.4 | |
| acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 | |
| ipmi message handler version 39.2 | |
| IPMI System Interface driver. | |
| ipmi_si: Adding default-specified kcs state machine | |
| ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 | |
| ipmi_si: Interface detection failed | |
| ipmi_si: Adding default-specified smic state machine | |
| ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 | |
| ipmi_si: Interface detection failed | |
| ipmi_si: Adding default-specified bt state machine | |
| ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 | |
| ipmi_si: Interface detection failed | |
| ipmi_si: Unable to find any System Interface(s) | |
| input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 | |
| ACPI: Power Button [PWRB] | |
| input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 | |
| ACPI: Power Button [PWRF] | |
| ACPI: Fan [FAN] (on) | |
| ACPI: acpi_idle registered with cpuidle | |
| ACPI: SSDT 00000000bf6e7b00 0026C (v01 TOSFIC Cpu0Ist 00003000 INTL 20041203) | |
| ACPI: SSDT 00000000bf6e7fc0 00152 (v01 TOSFIC Cpu1Ist 00003000 INTL 20041203) | |
| [Firmware Bug]: No valid trip found | |
| thermal LNXTHERM:01: registered as thermal_zone0 | |
| ACPI: Thermal Zone [THRM] (56 C) | |
| GHES: HEST is not enabled! | |
| Non-volatile memory driver v1.3 | |
| Linux agpgart interface v0.103 | |
| agpgart-intel 0000:00:00.0: Intel 945G Chipset | |
| agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable | |
| agpgart-intel 0000:00:00.0: detected 8192K stolen memory | |
| agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 | |
| crash memory driver: version 1.1 | |
| Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
| serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A | |
| 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A | |
| brd: module loaded | |
| loop: module loaded | |
| input: Macintosh mouse button emulation as /devices/virtual/input/input2 | |
| Fixed MDIO Bus: probed | |
| ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 | |
| ehci_hcd 0000:00:1d.7: setting latency timer to 64 | |
| ehci_hcd 0000:00:1d.7: EHCI Host Controller | |
| ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 | |
| ehci_hcd 0000:00:1d.7: using broken periodic workaround | |
| ehci_hcd 0000:00:1d.7: debug port 1 | |
| ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported | |
| ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000 | |
| ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 | |
| usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb1: Product: EHCI Host Controller | |
| usb usb1: Manufacturer: Linux 2.6.32-431.17.1.el6.x86_64 ehci_hcd | |
| usb usb1: SerialNumber: 0000:00:1d.7 | |
| usb usb1: configuration #1 chosen from 1 choice | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 8 ports detected | |
| ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| uhci_hcd: USB Universal Host Controller Interface driver | |
| uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 | |
| uhci_hcd 0000:00:1d.0: setting latency timer to 64 | |
| uhci_hcd 0000:00:1d.0: UHCI Host Controller | |
| uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 | |
| uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00 | |
| usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 | |
| usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb2: Product: UHCI Host Controller | |
| usb usb2: Manufacturer: Linux 2.6.32-431.17.1.el6.x86_64 uhci_hcd | |
| usb usb2: SerialNumber: 0000:00:1d.0 | |
| usb usb2: configuration #1 chosen from 1 choice | |
| hub 2-0:1.0: USB hub found | |
| hub 2-0:1.0: 2 ports detected | |
| uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 | |
| uhci_hcd 0000:00:1d.1: setting latency timer to 64 | |
| uhci_hcd 0000:00:1d.1: UHCI Host Controller | |
| uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 | |
| uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00 | |
| usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 | |
| usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb3: Product: UHCI Host Controller | |
| usb usb3: Manufacturer: Linux 2.6.32-431.17.1.el6.x86_64 uhci_hcd | |
| usb usb3: SerialNumber: 0000:00:1d.1 | |
| usb usb3: configuration #1 chosen from 1 choice | |
| hub 3-0:1.0: USB hub found | |
| hub 3-0:1.0: 2 ports detected | |
| uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 | |
| uhci_hcd 0000:00:1d.2: setting latency timer to 64 | |
| uhci_hcd 0000:00:1d.2: UHCI Host Controller | |
| uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 | |
| uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00 | |
| usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 | |
| usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb4: Product: UHCI Host Controller | |
| usb usb4: Manufacturer: Linux 2.6.32-431.17.1.el6.x86_64 uhci_hcd | |
| usb usb4: SerialNumber: 0000:00:1d.2 | |
| usb usb4: configuration #1 chosen from 1 choice | |
| hub 4-0:1.0: USB hub found | |
| hub 4-0:1.0: 2 ports detected | |
| uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 | |
| uhci_hcd 0000:00:1d.3: setting latency timer to 64 | |
| uhci_hcd 0000:00:1d.3: UHCI Host Controller | |
| uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 | |
| uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00 | |
| usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 | |
| usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb5: Product: UHCI Host Controller | |
| usb usb5: Manufacturer: Linux 2.6.32-431.17.1.el6.x86_64 uhci_hcd | |
| usb usb5: SerialNumber: 0000:00:1d.3 | |
| usb usb5: configuration #1 chosen from 1 choice | |
| hub 5-0:1.0: USB hub found | |
| hub 5-0:1.0: 2 ports detected | |
| PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 | |
| PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp | |
| serio: i8042 KBD port at 0x60,0x64 irq 1 | |
| mice: PS/2 mouse device common for all mice | |
| rtc_cmos 00:04: RTC can wake from S4 | |
| rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 | |
| rtc0: alarms up to one month, 242 bytes nvram, hpet irqs | |
| cpuidle: using governor ladder | |
| cpuidle: using governor menu | |
| EFI Variables Facility v0.08 2004-May-17 | |
| usbcore: registered new interface driver hiddev | |
| usbcore: registered new interface driver usbhid | |
| usbhid: v2.6:USB HID core driver | |
| GRE over IPv4 demultiplexor driver | |
| TCP cubic registered | |
| Initializing XFRM netlink socket | |
| NET: Registered protocol family 17 | |
| registered taskstats version 1 | |
| rtc_cmos 00:04: setting system clock to 2014-05-26 14:34:44 UTC (1401114884) | |
| Initalizing network drop monitor service | |
| Freeing unused kernel memory: 1280k freed | |
| Write protecting the kernel read-only data: 10240k | |
| Freeing unused kernel memory: 800k freed | |
| Freeing unused kernel memory: 1584k freed | |
| input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 | |
| dracut: dracut-004-336.el6_5.2 | |
| device-mapper: uevent: version 1.0.3 | |
| device-mapper: ioctl: 4.24.6-ioctl (2013-01-15) initialised: [email protected] | |
| udev: starting version 147 | |
| [drm] Initialized drm 1.1.0 20060810 | |
| i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 | |
| [drm] Memory usable by graphics device = 256M | |
| i915 0000:00:02.0: setting latency timer to 64 | |
| [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). | |
| [drm] Driver supports precise vblank timestamp query. | |
| vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem | |
| [drm] initialized overlay support | |
| fbcon: inteldrmfb (fb0) is primary device | |
| Console: switching to colour frame buffer device 210x65 | |
| i915 0000:00:02.0: fb0: inteldrmfb frame buffer device | |
| i915 0000:00:02.0: registered panic notifier | |
| Slow work thread pool: Starting up | |
| Slow work thread pool: Ready | |
| [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 | |
| dracut: Starting plymouth daemon | |
| yenta_cardbus 0000:01:05.0: CardBus bridge found [1509:8010] | |
| Refined TSC clocksource calibration: 3391.499 MHz. | |
| Switching to clocksource tsc | |
| yenta_cardbus 0000:01:05.0: ISA IRQ mask 0x0cb8, PCI irq 19 | |
| yenta_cardbus 0000:01:05.0: Socket status: 30000006 | |
| pci_bus 0000:01: Raising subordinate bus# of parent bus (#01) from #02 to #05 | |
| yenta_cardbus 0000:01:05.0: pcmcia: parent PCI bridge window: [io 0xe000-0xefff] | |
| yenta_cardbus 0000:01:05.0: pcmcia: parent PCI bridge window: [mem 0xf4000000-0xfbffffff] | |
| yenta_cardbus 0000:01:05.0: pcmcia: parent PCI bridge window: [mem 0xfdd00000-0xfddfffff 64bit pref] | |
| firewire_ohci 0000:01:05.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 | |
| firewire_ohci 0000:01:05.1: setting latency timer to 64 | |
| firewire_ohci: Added fw-ohci device 0000:01:05.1, OHCI version 1.0 | |
| sdhci: Secure Digital Host Controller Interface driver | |
| sdhci: Copyright(c) Pierre Ossman | |
| sdhci-pci 0000:01:05.2: SDHCI controller found [1180:0822] (rev 18) | |
| alloc irq_desc for 17 on node -1 | |
| alloc kstat_irqs on node -1 | |
| sdhci-pci 0000:01:05.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17 | |
| Registered led device: mmc0:: | |
| mmc0: SDHCI controller on PCI [0000:01:05.2] using PIO | |
| ata_piix 0000:00:1f.2: version 2.13 | |
| ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 | |
| ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] | |
| ata_piix 0000:00:1f.2: setting latency timer to 64 | |
| scsi0 : ata_piix | |
| scsi1 : ata_piix | |
| ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 | |
| ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 | |
| ata2.00: ATAPI: DW-224E-C, M.AA, max UDMA/33 | |
| ata2.00: configured for UDMA/33 | |
| ata1.00: ATA-7: ST3408111AS, 3.AAE, max UDMA/133 | |
| ata1.00: 78165360 sectors, multi 16: LBA48 NCQ (depth 0/32) | |
| ata1.00: configured for UDMA/133 | |
| scsi 0:0:0:0: Direct-Access ATA ST3408111AS 3.AA PQ: 0 ANSI: 5 | |
| scsi 1:0:0:0: CD-ROM TEAC DW-224E-C M.AA PQ: 0 ANSI: 5 | |
| sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB) | |
| sd 0:0:0:0: [sda] Write Protect is off | |
| sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 | |
| sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
| sda: sda1 sda2 | |
| sd 0:0:0:0: [sda] Attached SCSI disk | |
| sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray | |
| Uniform CD-ROM driver Revision: 3.20 | |
| sr 1:0:0:0: Attached scsi CD-ROM sr0 | |
| firewire_core: created device fw0: GUID 0040ca0703089637, S400 | |
| dracut: Scanning devices sda2 for LVM logical volumes vg_equium1/lv_root vg_equium1/lv_swap | |
| dracut: inactive '/dev/vg_equium1/lv_root' [33.84 GiB] inherit | |
| dracut: inactive '/dev/vg_equium1/lv_swap' [2.94 GiB] inherit | |
| EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: | |
| dracut: Mounted root filesystem /dev/mapper/vg_equium1-lv_root | |
| SELinux: Disabled at runtime. | |
| SELinux: Unregistering netfilter hooks | |
| type=1404 audit(1401114887.001:2): selinux=0 auid=4294967295 ses=4294967295 | |
| dracut: | |
| dracut: Switching root | |
| udev: starting version 147 | |
| snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 | |
| alloc irq_desc for 24 on node -1 | |
| alloc kstat_irqs on node -1 | |
| snd_hda_intel 0000:00:1b.0: irq 24 for MSI/MSI-X | |
| snd_hda_intel 0000:00:1b.0: setting latency timer to 64 | |
| input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 | |
| input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 | |
| input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 | |
| input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 | |
| input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 | |
| intel_rng: FWH not detected | |
| ACPI: resource (null) [io 0x0428-0x042f] conflicts with ACPI region PM2S [io 0x429-0x429] | |
| ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver | |
| ACPI: resource (null) [io 0x0480-0x04bf] conflicts with ACPI region GPO2 [io 0x4b8-0x4bb] | |
| ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver | |
| lpc_ich: Resource conflict(s) found affecting gpio_ich | |
| sd 0:0:0:0: Attached scsi generic sg0 type 0 | |
| sr 1:0:0:0: Attached scsi generic sg1 type 5 | |
| i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 | |
| r592 0000:01:05.3: PCI INT C -> GSI 17 (level, low) -> IRQ 17 | |
| r592 0000:01:05.3: setting latency timer to 64 | |
| r592: driver succesfully loaded | |
| r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded | |
| r8169 0000:01:06.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 | |
| r8169 0000:01:06.0: (unregistered net_device): not PCI Express | |
| r8169 0000:01:06.0: eth0: RTL8169sc/8110sc at 0xffffc9001137e000, xx:xx:xx:xx:xx:xx, XID 18000000 IRQ 19 | |
| r8169 0000:01:06.0: eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok] | |
| parport_pc 00:09: reported by Plug and Play ACPI | |
| parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] | |
| iTCO_vendor_support: vendor-support=0 | |
| iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh | |
| iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) | |
| iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) | |
| ppdev: user-space parallel port driver | |
| EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: | |
| Adding 3080184k swap on /dev/mapper/vg_equium1-lv_swap. Priority:-1 extents:1 across:3080184k | |
| NET: Registered protocol family 10 | |
| lo: Disabled Privacy Extensions | |
| ip6_tables: (C) 2000-2006 Netfilter Core Team | |
| nf_conntrack version 0.5.0 (16384 buckets, 65536 max) | |
| ip_tables: (C) 2000-2006 Netfilter Core Team | |
| r8169 0000:01:06.0: eth0: link down | |
| r8169 0000:01:06.0: eth0: link down | |
| ADDRCONF(NETDEV_UP): eth0: link is not ready | |
| r8169 0000:01:06.0: eth0: link up | |
| ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
| eth0: no IPv6 routers present | |
| Floppy drive(s): fd0 is 1.44M | |
| FDC 0 is a post-1991 82077 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment