Skip to content

Instantly share code, notes, and snippets.

@tomari
Created April 20, 2012 01:50
Show Gist options
  • Select an option

  • Save tomari/2425254 to your computer and use it in GitHub Desktop.

Select an option

Save tomari/2425254 to your computer and use it in GitHub Desktop.
Sun Ultra Enterprise 3000 Debian 6.0.4 kernel panic dmesg
Hardware Power ON
3,0>ERROR: TEST=NVRAM Devices,SUBTEST=M48T59 (TOD) Init ID=8.1
3,0>Component under test: Board 16 Firehose Bus
3,0>TODC battery is low bit set
3,0>ERROR: TEST=NVRAM Devices,SUBTEST=M48T59 (TOD) Init ID=8.1
3,0>Component under test: Board 16 Firehose Bus
3,0>TODC battery is low bit set
Incorrect configuration checksum;
Setting NVRAM parameters to default values.
Setting diag-switch? NVRAM parameter to true
Detected failed TOD on clock board. Using backup TOD on board in slot 1
fhc ac simm-status environment sram flashprom SUNW,UltraSPARC-II SUNW,UltraSPARC-II
fhc ac simm-status environment sram flashprom SUNW,UltraSPARC-II SUNW,UltraSPARC-II
fhc ac simm-status environment sram flashprom SUNW,UltraSPARC-II SUNW,UltraSPARC-II
Probing UPA Slot at 2,0 sbus fhc ac environment flashprom eeprom sbus-speed counter-timer
Probing UPA Slot at 3,0 sbus counter-timer
Probing /sbus@2,0 at d,0 SUNW,soc
Probing /sbus@2,0 at 1,0 Nothing there
Probing /sbus@2,0 at 2,0 Nothing there
Probing /sbus@3,0 at 3,0 SUNW,hme SUNW,fas sd st
Probing /sbus@3,0 at 0,0 Nothing there
screen not found.
Can't open input device.
Keyboard not present. Using ttya for input and output.
Incorrect configuration checksum;
Setting NVRAM parameters to default values.
Setting diag-switch? NVRAM parameter to true
Detected failed TOD on clock board. Using backup TOD on board in slot 1
fhc ac simm-status environment sram flashprom SUNW,UltraSPARC-II SUNW,UltraSPARC-II
fhc ac simm-status environment sram flashprom SUNW,UltraSPARC-II SUNW,UltraSPARC-II
fhc ac simm-status environment sram flashprom SUNW,UltraSPARC-II SUNW,UltraSPARC-II
Probing UPA Slot at 2,0 sbus fhc ac environment flashprom eeprom sbus-speed counter-timer
Probing UPA Slot at 3,0 sbus counter-timer
Probing /sbus@2,0 at d,0 SUNW,soc
Probing /sbus@2,0 at 1,0 Nothing there
Probing /sbus@2,0 at 2,0 Nothing there
Probing /sbus@3,0 at 3,0 SUNW,hme SUNW,fas sd st
Probing /sbus@3,0 at 0,0 Nothing there
4-slot Sun Enterprise 3000, No Keyboard
OpenBoot 3.2.30, 5376 MB memory installed, Serial #8260434.
Copyright 2002 Sun Microsystems, Inc. All rights reserved
Ethernet address 8:0:20:7e:b:52, Host ID: 807e0b52.
Boot device: disk File and args:
SILO Version 1.4.14
boot:
Allocated 64 Megs of memory at 0x40000000 for kernel
Uncompressing image...
Loaded kernel version 2.6.32
Loading initial ramdisk (2773632 bytes at 0x4400000 phys, 0x40C00000 virt)...
[ 0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 3.2.30 2002/10/25 14:03'
[ 0.000000] PROMLIB: Root node compatible:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-sparc64-smp (Debian 2.6.32-41) ([email protected]) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Jan 16 17:28:56 UTC 2012
[ 0.000000] bootconsole [earlyprom0] enabled
[ 0.000000] ARCH: SUN4U
[ 0.000000] Ethernet address: 08:00:20:7e:0b:52
[ 0.000000] Kernel: Using 2 locked TLB entries for main kernel image.
[ 0.000000] Remapping the kernel... done.
[ 0.000000] OF stdout device is: /central@1f,0/fhc@0,f8800000/zs@0,902000:a
[ 0.000000] PROM: Built device tree with 59363 bytes of memory.
[ 0.000000] Top of RAM: 0x14fd18000, Total RAM: 0x14f956000
[ 0.000000] Memory hole size: 3MB
[ 0.000000] [0000010000000000-fffff80000c00000] page_structs=131072 node=0 entry=0/0
[ 0.000000] [0000010000000000-fffff80001000000] page_structs=131072 node=0 entry=1/0
[ 0.000000] [0000010000800000-fffff80001400000] page_structs=131072 node=0 entry=2/0
[ 0.000000] [0000010000800000-fffff80001800000] page_structs=131072 node=0 entry=3/0
[ 0.000000] [0000010001000000-fffff80001c00000] page_structs=131072 node=0 entry=4/0
[ 0.000000] [0000010001000000-fffff80002000000] page_structs=131072 node=0 entry=5/0
[ 0.000000] [0000010001800000-fffff80002400000] page_structs=131072 node=0 entry=6/0
[ 0.000000] [0000010001800000-fffff80002800000] page_structs=131072 node=0 entry=7/0
[ 0.000000] [0000010002000000-fffff80002c00000] page_structs=131072 node=0 entry=8/0
[ 0.000000] [0000010002000000-fffff80003000000] page_structs=131072 node=0 entry=9/0
[ 0.000000] [0000010002800000-fffff80003400000] page_structs=131072 node=0 entry=10/0
[ 0.000000] [0000010002800000-fffff80003800000] page_structs=131072 node=0 entry=11/0
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x000a7e8c
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x000a7c27
[ 0.000000] 0: 0x000a7e00 -> 0x000a7e79
[ 0.000000] 0: 0x000a7e81 -> 0x000a7e8c
[ 0.000000] Booting Linux...
[ 0.000000] PERCPU: Embedded 7 pages/cpu @fffff80003c00000 s25984 r8192 d23168 u524288
[ 0.000000] pcpu-alloc: s25984 r8192 d23168 u524288 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 6 7 10 11 14 15 - -
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 681901
[ 0.000000] Kernel command line: root=/dev/sda2 ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 10, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 9, 4194304 bytes)
[ 0.000000] Memory: 5426464k available (3448k kernel code, 1432k data, 240k init) [fffff80000000000,000000014fd18000]
[ 0.000000] SLUB: Genslabs=14, HWalign=32, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:255
[ 0.000000] clocksource: mult[40842] shift[16]
[ 0.000000] clockevent: mult[3f7ced91] shift[32]
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled, bootconsole disabled
[ 0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 3.2.30 2002/10/25 14:03'
[ 0.000000] PROMLIB: Root node compatible:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-sparc64-smp (Debian 2.6.32-41) ([email protected]) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Jan 16 17:28:56 UTC 2012
[ 0.000000] bootconsole [earlyprom0] enabled
[ 0.000000] ARCH: SUN4U
[ 0.000000] Ethernet address: 08:00:20:7e:0b:52
[ 0.000000] Kernel: Using 2 locked TLB entries for main kernel image.
[ 0.000000] Remapping the kernel... done.
[ 0.000000] OF stdout device is: /central@1f,0/fhc@0,f8800000/zs@0,902000:a
[ 0.000000] PROM: Built device tree with 59363 bytes of memory.
[ 0.000000] Top of RAM: 0x14fd18000, Total RAM: 0x14f956000
[ 0.000000] Memory hole size: 3MB
[ 0.000000] [0000010000000000-fffff80000c00000] page_structs=131072 node=0 entry=0/0
[ 0.000000] [0000010000000000-fffff80001000000] page_structs=131072 node=0 entry=1/0
[ 0.000000] [0000010000800000-fffff80001400000] page_structs=131072 node=0 entry=2/0
[ 0.000000] [0000010000800000-fffff80001800000] page_structs=131072 node=0 entry=3/0
[ 0.000000] [0000010001000000-fffff80001c00000] page_structs=131072 node=0 entry=4/0
[ 0.000000] [0000010001000000-fffff80002000000] page_structs=131072 node=0 entry=5/0
[ 0.000000] [0000010001800000-fffff80002400000] page_structs=131072 node=0 entry=6/0
[ 0.000000] [0000010001800000-fffff80002800000] page_structs=131072 node=0 entry=7/0
[ 0.000000] [0000010002000000-fffff80002c00000] page_structs=131072 node=0 entry=8/0
[ 0.000000] [0000010002000000-fffff80003000000] page_structs=131072 node=0 entry=9/0
[ 0.000000] [0000010002800000-fffff80003400000] page_structs=131072 node=0 entry=10/0
[ 0.000000] [0000010002800000-fffff80003800000] page_structs=131072 node=0 entry=11/0
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x000a7e8c
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x000a7c27
[ 0.000000] 0: 0x000a7e00 -> 0x000a7e79
[ 0.000000] 0: 0x000a7e81 -> 0x000a7e8c
[ 0.000000] Booting Linux...
[ 0.000000] PERCPU: Embedded 7 pages/cpu @fffff80003c00000 s25984 r8192 d23168 u524288
[ 0.000000] pcpu-alloc: s25984 r8192 d23168 u524288 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 6 7 10 11 14 15 - -
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 681901
[ 0.000000] Kernel command line: root=/dev/sda2 ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 10, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 9, 4194304 bytes)
[ 0.000000] Memory: 5426464k available (3448k kernel code, 1432k data, 240k init) [fffff80000000000,000000014fd18000]
[ 0.000000] SLUB: Genslabs=14, HWalign=32, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:255
[ 0.000000] clocksource: mult[40842] shift[16]
[ 0.000000] clockevent: mult[3f7ced91] shift[32]
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled, bootconsole disabled
[ 627.734154] Calibrating delay using timer specific routine.. 497.73 BogoMIPS (lpj=995471)
[ 627.734391] Security Framework initialized
[ 627.734462] SELinux: Disabled at boot.
[ 627.734564] Mount-cache hash table entries: 512
[ 627.736241] Initializing cgroup subsys ns
[ 627.736288] Initializing cgroup subsys cpuacct
[ 627.736386] Initializing cgroup subsys devices
[ 627.736426] Initializing cgroup subsys freezer
[ 627.736463] Initializing cgroup subsys net_cls
[ 627.742983] CPU 7: synchronized TICK with master CPU (last diff -1 cycles, maxerr 523 cycles)
[ 627.747583] CPU 10: synchronized TICK with master CPU (last diff -2 cycles, maxerr 529 cycles)
[ 627.752171] CPU 11: synchronized TICK with master CPU (last diff -2 cycles, maxerr 529 cycles)
[ 627.756760] CPU 14: synchronized TICK with master CPU (last diff -3 cycles, maxerr 530 cycles)
[ 627.761380] CPU 15: synchronized TICK with master CPU (last diff -3 cycles, maxerr 531 cycles)
[ 627.761416] Brought up 6 CPUs
[ 627.766163] devtmpfs: initialized
[ 627.768851] regulator: core version 0.5
[ 627.769440] NET: Registered protocol family 16
[ 627.779141] fhc: Board #1, Version[1] PartID[fa0] Manuf[3e] (Central)
[ 627.779357] fhc: Board #3, Version[1] PartID[fa0] Manuf[3e] (JTAG Master)
[ 627.779570] fhc: Board #5, Version[1] PartID[fa0] Manuf[3e]
[ 627.779779] fhc: Board #7, Version[1] PartID[fa0] Manuf[3e]
[ 627.779992] fhc: Board #1, Version[1] PartID[fa0] Manuf[3e]
[ 627.780295] clock_board: Detected 4 slot Enterprise system.
[ 627.780518] SYSIO: UPA portID ffffffff, at 000001c400000000
[ 627.790694] SYSIO: UPA portID ffffffff, at 000001c600000000
[ 627.808148] bio: create slab <bio-0> at 0
[ 627.810168] vgaarb: loaded
[ 627.812102] /central/fhc@0,f8800000/eeprom@0,908000: Mostek regs at 0x1fff8908000
[ 627.812838] Switching to clocksource tick
[ 627.830374] NET: Registered protocol family 2
[ 627.831921] IP route cache hash table entries: 262144 (order: 8, 2097152 bytes)
[ 627.846163] TCP established hash table entries: 524288 (order: 10, 8388608 bytes)
[ 627.895648] TCP bind hash table entries: 65536 (order: 7, 1048576 bytes)
[ 627.901897] TCP: Hash tables configured (established 524288 bind 65536)
[ 627.901996] TCP reno registered
[ 627.903507] NET: Registered protocol family 1
[ 627.904172] Unpacking initramfs...
[ 628.530689] Freeing initrd memory: 2708k freed
[ 628.532729] audit: initializing netlink socket (disabled)
[ 628.532880] type=2000 audit(0.882:1): initialized
[ 628.557499] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 628.577828] VFS: Disk quotas dquot_6.5.2
[ 628.578701] Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
[ 628.579655] msgmni has been set to 10605
[ 628.583410] alg: No test for stdrng (krng)
[ 628.584126] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 628.584235] io scheduler noop registered
[ 628.584289] io scheduler anticipatory registered
[ 628.584345] io scheduler deadline registered
[ 628.585275] io scheduler cfq registered (default)
[ 628.602116] [drm] Initialized drm 1.1.0 20060810
[ 628.810736] f005de3c: ttyS0 at MMIO 0x1fff8902000 (irq = 2) is a zs (ESCC)
[ 628.810817] Console: ttyS0 (SunZilog zs0)
[ 635.823231] console [ttyS0] enabled
[ 635.865840] f005de3c: ttyS1 at MMIO 0x1fff8902004 (irq = 2) is a zs (ESCC)
[ 636.155714] f005df14: Keyboard at MMIO 0x1fff8904000 (irq = 2) is a zs
[ 636.231835] f005df14: Mouse at MMIO 0x1fff8904004 (irq = 2) is a zs
[ 636.309602] Uniform Multi-Platform E-IDE driver
[ 636.362049] ide-gd driver 1.18
[ 636.399278] mice: PS/2 mouse device common for all mice
[ 636.462220] rtc-m48t59 rtc-m48t59.0: rtc core: registered m48t59 as rtc0
[ 636.546324] TCP cubic registered
[ 636.584559] NET: Registered protocol family 10
[ 636.647301] Mobile IPv6
[ 636.674438] NET: Registered protocol family 17
[ 636.728478] registered taskstats version 1
[ 636.777178] rtc-m48t59 rtc-m48t59.0: setting system clock to 2009-12-08 14:10:22 UTC (1260281422)
[ 636.883028] Initalizing network drop monitor service
Loading, please wait...
[ 637.125890] udev[88]: starting version 164
Begin: Loading essential drivers ... [ 637.461279] input: Sun Mouse as /devices/root/f005da70/f005db8c/f005df14/serio1/input/input0
[ 637.680539] SCSI subsystem initialized
[ 637.808387] esp: esp0, regs[1c738810000:1c738800000] irq[18]
[ 637.874165] esp: esp0 is a FASHME, 40 MHz (ccf=0), SCSI ID 7
[ 640.942416] scsi0 : esp
[ 640.984354] scsi 0:0:0:0: Direct-Access SEAGATE ST34371W SUN4.2G 7462 PQ: 0 ANSI: 2
[ 641.079407] scsi target0:0:0: Beginning Domain Validation
done.
Begin: Running /s[ 641.169287] scsi target0:0:0: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 15)
cripts/in[ 641.267570] scsi target0:0:0: Domain Validation skipping write tests
[ 641.342867] scsi target0:0:0: Ending Domain Validation
it-premount ... do[ 641.423885] scsi 0:0:1:0: Direct-Access SEAGATE ST34371W SUN4.2G 7462 PQ: 0 ANSI: 2
[ 641.520063] scsi target0:0:1: Beginning Domain Validation
ne.
Begin: Mounting roo[ 641.609963] scsi target0:0:1: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 15)
t file sy[ 641.708347] scsi target0:0:1: Domain Validation skipping write tests
[ 641.783562] scsi target0:0:1: Ending Domain Validation
stem ... Begin[ 641.860389] scsi 0:0:2:0: Direct-Access SEAGATE ST19171W SUN9.0G 0776 PQ: 0 ANSI: 2
[ 641.956575] scsi target0:0:2: Beginning Domain Validation
: Running /[ 642.033360] scsi target0:0:2: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 15)
scri[ 642.125908] scsi target0:0:2: Domain Validation skipping write tests
[ 642.201348] scsi target0:0:2: Ending Domain Validation
pts/local-t[ 642.274373] scsi 0:0:3:0: Direct-Access SEAGATE ST19171W SUN9.0G 0776 PQ: 0 ANSI: 2
[ 642.371237] scsi target0:0:3: Beginning Domain Validation
op ... done[ 642.448043] scsi target0:0:3: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 15)
.
B[ 642.540586] scsi target0:0:3: Domain Validation skipping write tests
[ 642.616001] scsi target0:0:3: Ending Domain Validation
egin: Waiting for root file system ... [ 642.923257] scsi 0:0:5:0: Sequential-Access HP C1537A L610 PQ: 0 ANSI: 2
[ 643.018232] scsi target0:0:5: Beginning Domain Validation
[ 643.099406] scsi target0:0:5: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
[ 643.192487] scsi target0:0:5: Domain Validation skipping write tests
[ 643.266536] scsi target0:0:5: Ending Domain Validation
[ 643.341591] scsi 0:0:6:0: CD-ROM TOSHIBA XM5701TASUN12XCD 0997 PQ: 0 ANSI: 2
[ 643.436574] scsi target0:0:6: Beginning Domain Validation
[ 643.503446] scsi target0:0:6: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 8)
[ 643.585279] scsi target0:0:6: Domain Validation skipping write tests
[ 643.659841] scsi target0:0:6: Ending Domain Validation
[ 645.679195] kernel BUG at /build/buildd-linux-2.6_2.6.32-41-sparc-HYtdAU/linux-2.6-2.6.32/debian/build/source_sparc_none/drivers/scsi/esp_scsi.c:583!
[ 645.837616] \|/ ____ \|/
[ 645.837629] "@'/ .. \`@"
[ 645.837641] /_| \__/ |_\
[ 645.837654] \__U_/
[ 646.013632] swapper(0): Kernel bad sw trap 5 [#1]
[ 646.069900] TSTATE: 0000004480e01602 TPC: 000000001004ca00 TNPC: 000000001004ca04 Y: 00000000 Not tainted
[ 646.187689] TPC: <esp_free_lun_tag+0x64/0x68 [esp_scsi]>
[ 646.251178] g0: 0000000000868000 g1: 000000000000000e g2: 0000000000884cb0 g3: 0000000000000000
[ 646.355392] g4: 000000000087f738 g5: fffff800032fa000 g6: 0000000000868000 g7: 0000000000000002
[ 646.459576] o0: 000000000000009c o1: 00000000100502d0 o2: 0000000000000247 o3: 0000000000959948
[ 646.563762] o4: 0000000432506a00 o5: 000000000086c100 sp: fffff8014fce32c1 ret_pc: 000000001004c9f8
[ 646.672122] RPC: <esp_free_lun_tag+0x5c/0x68 [esp_scsi]>
[ 646.735645] l0: 0000000000000040 l1: 000000000087b4e8 l2: 0000000000000000 l3: 000000000087f730
[ 646.839854] l4: 0000000000764120 l5: 000000000090e340 l6: 0000000000878100 l7: 000000000086be38
[ 646.944039] i0: fffff8014de9a720 i1: fffff8014f03b000 i2: 000000000000000c i3: 0000000000000003
[ 647.048219] i4: 000000000086be48 i5: 000000000086be40 i6: fffff8014fce3381 i7: 000000001004df58
[ 647.152424] I7: <esp_cmd_is_done+0x48/0x174 [esp_scsi]>
[ 647.214882] Disabling lock debugging due to kernel taint
[ 647.278435] Instruction DUMP: 11040140 7c0f741f 901222d0 <91d02005> 9de3bf40 c45e2088 c200a008 80a06000 22480007
[ 647.407617] Kernel panic - not syncing: Aiee, killing interrupt handler!
[ 647.487849] Call Trace:
[ 647.517050] [000000000046aabc] do_exit+0x64/0x6f8
[ 647.574343] [0000000000427ba4] die_if_kernel+0x264/0x290
[ 647.638935] [0000000000429e48] bad_trap+0x78/0xe8
[ 647.696242] [00000000004220b0] tl0_resv104+0x30/0xa0
[ 647.756660] [000000001004ca00] esp_free_lun_tag+0x64/0x68 [esp_scsi]
[ 647.833766] [000000001004df58] esp_cmd_is_done+0x48/0x174 [esp_scsi]
[ 647.910861] [000000001004edcc] esp_process_event+0x8d8/0x1414 [esp_scsi]
[ 647.992125] [0000000010050210] scsi_esp_intr+0x908/0x980 [esp_scsi]
[ 648.068181] [00000000004aecd4] handle_IRQ_event+0x8c/0x180
[ 648.134856] [00000000004b0a40] handle_fasteoi_irq+0x90/0xec
[ 648.202569] [000000000042a048] handler_irq+0xd0/0x10c
[ 648.264038] [00000000004208b4] tl0_irq5+0x14/0x20
[ 648.321346] [000000000042bedc] cpu_idle+0xe4/0x120
[ 648.379697] [00000000008d29ac] start_kernel+0x38c/0x39c
[ 648.443242] [000000000074a35c] tlb_fixup_done+0x98/0xa0
[ 648.506778] [0000000000000000] (null)
[ 648.551578] Press Stop-A (L1-A) to return to the boot prom
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment