Dell Dimension XPS R400

gistfile1.txt

processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 5
model name	: Pentium II (Deschutes)
stepping	: 1
cpu MHz		: 398.294
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pse36 mmx fxsr up
bogomips	: 796.58
clflush size	: 32
cache_alignment	: 32
address sizes	: 36 bits physical, 32 bits virtual
power management:

# dmidecode 2.9
SMBIOS 2.1 present.
42 structures occupying 1387 bytes.
Table at 0x000EFF80.

Handle 0x0000, DMI type 0, 19 bytes
BIOS Information
	Vendor: Intel Corp.
	Version: 4S4EB0X1.10A.0035.P13
	Release Date: 09/21/99
	ROM Size: 512 kB
	Characteristics:
		ISA is supported
		PCI is supported
		PNP is supported
		APM is supported
		BIOS is upgradeable
		BIOS shadowing is allowed
		ESCD support is available
		Boot from CD is supported
		Selectable boot is supported
		EDD is supported
		Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
		5.25"/360 KB floppy services are supported (int 13h)
		5.25"/1.2 MB floppy services are supported (int 13h)
		3.5"/720 KB floppy services are supported (int 13h)
		3.5"/2.88 MB floppy services are supported (int 13h)
		Print screen service is supported (int 5h)
		8042 keyboard services are supported (int 9h)
		Serial services are supported (int 14h)
		Printer services are supported (int 17h)
		CGA/mono video services are supported (int 10h)
		ACPI is supported

Handle 0x0001, DMI type 1, 25 bytes
System Information
	Manufacturer:                                
	Product Name:                                
	Version:                        
	Serial Number:                                
	UUID: Not Present
	Wake-up Type: Unknown

Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
	Manufacturer: Intel Corporation
	Product Name: SE440BX
	Version: AA696089-405
	Serial Number: 000284981246587O01R0

Handle 0x0003, DMI type 3, 13 bytes
Chassis Information
	Manufacturer:                                
	Type: Unknown
	Lock: Not Present
	Version:                        
	Serial Number:                                
	Asset Tag: T1RMT
	Boot-up State: Unknown
	Power Supply State: Unknown
	Thermal State: Unknown
	Security Status: Unknown

Handle 0x0004, DMI type 4, 32 bytes
Processor Information
	Socket Designation: J4J1
	Type: Central Processor
	Family: Pentium II
	Manufacturer: Intel Corporation
	ID: 51 06 00 00 FF F9 83 01
	Signature: Type 0, Family 6, Model 5, Stepping 1
	Flags:
		FPU (Floating-point unit on-chip)
		VME (Virtual mode extension)
		DE (Debugging extension)
		PSE (Page size extension)
		TSC (Time stamp counter)
		MSR (Model specific registers)
		PAE (Physical address extension)
		MCE (Machine check exception)
		CX8 (CMPXCHG8 instruction supported)
		SEP (Fast system call)
		MTRR (Memory type range registers)
		PGE (Page global enable)
		MCA (Machine check architecture)
		CMOV (Conditional move instruction supported)
		PAT (Page attribute table)
		PSE-36 (36-bit page size extension)
		MMX (MMX technology supported)
		FXSR (Fast floating-point save and restore)
	Version: Intel Pentium(R) II Processor
	Voltage: 2.0 V
	External Clock: 100 MHz
	Max Speed: 450 MHz
	Current Speed: 400 MHz
	Status: Populated, Enabled
	Upgrade: Slot 1
	L1 Cache Handle: 0x0009
	L2 Cache Handle: 0x000A
	L3 Cache Handle: No L3 Cache

Handle 0x0005, DMI type 5, 22 bytes
Memory Controller Information
	Error Detecting Method: 32-bit ECC
	Error Correcting Capabilities:
		Single-bit Error Correcting
	Supported Interleave: Other
	Current Interleave: Other
	Maximum Memory Module Size: 256 MB
	Maximum Total Memory Size: 768 MB
	Supported Speeds:
		Other
	Supported Memory Types:
		ECC
		DIMM
		SDRAM
	Memory Module Voltage: 3.3 V
	Associated Memory Slots: 3
		0x0006
		0x0007
		0x0008
	Enabled Error Correcting Capabilities:
		Unknown

Handle 0x0006, DMI type 6, 12 bytes
Memory Module Information
	Socket Designation: J6J1
	Bank Connections: 1 0
	Current Speed: Unknown
	Type: DIMM SDRAM
	Installed Size: 256 MB (Double-bank Connection)
	Enabled Size: 256 MB (Double-bank Connection)
	Error Status: OK

Handle 0x0007, DMI type 6, 12 bytes
Memory Module Information
	Socket Designation: J6J2
	Bank Connections: 3 2
	Current Speed: Unknown
	Type: DIMM SDRAM
	Installed Size: 256 MB (Double-bank Connection)
	Enabled Size: 256 MB (Double-bank Connection)
	Error Status: OK

Handle 0x0008, DMI type 6, 12 bytes
Memory Module Information
	Socket Designation: J7J1
	Bank Connections: 5 4
	Current Speed: Unknown
	Type: DIMM SDRAM
	Installed Size: 256 MB (Double-bank Connection)
	Enabled Size: 256 MB (Double-bank Connection)
	Error Status: OK

Handle 0x0009, DMI type 7, 19 bytes
Cache Information
	Socket Designation: None
	Configuration: Enabled, Not Socketed, Level 1
	Operational Mode: Write Back
	Location: Internal
	Installed Size: 32 KB
	Maximum Size: 32 KB
	Supported SRAM Types:
		Non-burst
	Installed SRAM Type: Non-burst
	Speed: Unknown
	Error Correction Type: Unknown
	System Type: Unknown
	Associativity: Unknown

Handle 0x000A, DMI type 7, 19 bytes
Cache Information
	Socket Designation: None
	Configuration: Enabled, Not Socketed, Level 2
	Operational Mode: Write Back
	Location: External
	Installed Size: 512 KB
	Maximum Size: 512 KB
	Supported SRAM Types:
		Non-burst
	Installed SRAM Type: Unknown
	Speed: Unknown
	Error Correction Type: Unknown
	System Type: Unknown
	Associativity: Unknown

Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: J1K1
	Internal Connector Type: None
	External Reference Designator: COM A
	External Connector Type: DB-9 male
	Port Type: Serial Port 16550A Compatible

Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: J1J1
	Internal Connector Type: None
	External Reference Designator: COM B
	External Connector Type: DB-9 male
	Port Type: Serial Port 16550A Compatible

Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: J1J2
	Internal Connector Type: None
	External Reference Designator: LPT1
	External Connector Type: DB-25 female
	Port Type: Parallel Port ECP/EPP

Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: J1M1
	Internal Connector Type: None
	External Reference Designator: Keyboard
	External Connector Type: PS/2
	Port Type: Keyboard Port

Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: J1M1
	Internal Connector Type: None
	External Reference Designator: MOUSE
	External Connector Type: PS/2
	Port Type: Mouse Port

Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: J8K1
	Internal Connector Type: On Board Floppy
	External Reference Designator: FLOPPY
	External Connector Type: None
	Port Type: Other

Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: J8G1
	Internal Connector Type: On Board IDE
	External Reference Designator: PRI IDE
	External Connector Type: None
	Port Type: Other

Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: J7G1
	Internal Connector Type: On Board IDE
	External Reference Designator: SEC IDE
	External Connector Type: None
	Port Type: Other

Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: J1G1
	Internal Connector Type: Other
	External Reference Designator: GAME
	External Connector Type: None
	Port Type: MIDI Port

Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: J1G1
	Internal Connector Type: Other
	External Reference Designator: MIC
	External Connector Type: None
	Port Type: MIDI Port

Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: J1G1
	Internal Connector Type: Other
	External Reference Designator: LINE IN
	External Connector Type: None
	Port Type: MIDI Port

Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: J1G1
	Internal Connector Type: Other
	External Reference Designator: LINE OUT
	External Connector Type: None
	Port Type: MIDI Port

Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: J1F1
	Internal Connector Type: Other
	External Reference Designator: CD
	External Connector Type: None
	Port Type: USB

Handle 0x0018, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: J1F1
	Internal Connector Type: Other
	External Reference Designator: TELEPHONY
	External Connector Type: None
	Port Type: USB

Handle 0x0019, DMI type 9, 13 bytes
System Slot Information
	Designation: ISA-1, J4B2
	Type: 16-bit ISA
	Current Usage: Unknown
	Length: Long
	Characteristics:
		5.0 V is provided
		Opening is shared

Handle 0x001A, DMI type 9, 13 bytes
System Slot Information
	Designation: ISA-2, J4A1
	Type: 16-bit ISA
	Current Usage: Unknown
	Length: Long
	Characteristics:
		5.0 V is provided

Handle 0x001B, DMI type 9, 13 bytes
System Slot Information
	Designation: PCI-1, J4D2
	Type: 32-bit PCI
	Current Usage: In Use
	Length: Long
	ID: 0
	Characteristics:
		3.3 V is provided

Handle 0x001C, DMI type 9, 13 bytes
System Slot Information
	Designation: PCI-2, J4D1
	Type: 32-bit PCI
	Current Usage: Available
	Length: Long
	ID: 1
	Characteristics:
		3.3 V is provided

Handle 0x001D, DMI type 9, 13 bytes
System Slot Information
	Designation: PCI-3, J4C1
	Type: 32-bit PCI
	Current Usage: Available
	Length: Long
	ID: 2
	Characteristics:
		3.3 V is provided

Handle 0x001E, DMI type 9, 13 bytes
System Slot Information
	Designation: PCI-4, J4B1
	Type: 32-bit PCI
	Current Usage: Available
	Length: Long
	ID: 3
	Characteristics:
		3.3 V is provided
		Opening is shared

Handle 0x001F, DMI type 10, 6 bytes
On Board Device Information
	Type: Sound
	Status: Disabled
	Description: AUDIO

Handle 0x0020, DMI type 10, 6 bytes
On Board Device Information
	Type: Sound
	Status: Disabled
	Description: AUDIO

Handle 0x0021, DMI type 11, 5 bytes
OEM Strings
	String 1: DELL SYSTEM
	String 2: Dell Dimension XPS R400  
	String 3: z
	String 4: A13

Handle 0x0022, DMI type 12, 5 bytes
System Configuration Options
	Option 1: This is OEM string 1
	Option 2: This is OEM string 2
	Option 3: This is OEM string 3

Handle 0x0023, DMI type 15, 23 bytes
System Event Log
	Area Length: 4096 bytes
	Header Start Offset: 0x0000
	Header Length: 16 bytes
	Data Start Offset: 0x0010
	Access Method: Memory-mapped physical 32-bit address
	Access Address: 0xFFFF9000
	Status: Valid, Not Full
	Change Token: 0x00000006
	Header Format: Type 1
	Supported Log Type Descriptors: 0

Handle 0x0024, DMI type 16, 15 bytes
Physical Memory Array
	Location: System Board Or Motherboard
	Use: System Memory
	Error Correction Type: Single-bit ECC
	Maximum Capacity: 768 MB
	Error Information Handle: Not Provided
	Number Of Devices: 3

Handle 0x0025, DMI type 17, 21 bytes
Memory Device
	Array Handle: 0x0024
	Error Information Handle: No Error
	Total Width: 32 bits
	Data Width: 32 bits
	Size: 256 MB
	Form Factor: DIMM
	Set: 1
	Locator: J6J1
	Bank Locator: BANK 1
	Type: DRAM
	Type Detail: Synchronous

Handle 0x0026, DMI type 17, 21 bytes
Memory Device
	Array Handle: 0x0024
	Error Information Handle: No Error
	Total Width: 32 bits
	Data Width: 32 bits
	Size: 256 MB
	Form Factor: DIMM
	Set: 1
	Locator: J6J2
	Bank Locator: BANK 2
	Type: DRAM
	Type Detail: Synchronous

Handle 0x0027, DMI type 17, 21 bytes
Memory Device
	Array Handle: 0x0024
	Error Information Handle: No Error
	Total Width: 32 bits
	Data Width: 32 bits
	Size: 256 MB
	Form Factor: DIMM
	Set: 1
	Locator: J7J1
	Bank Locator: BANK 3
	Type: DRAM
	Type Detail: Synchronous

Handle 0x0028, DMI type 19, 15 bytes
Memory Array Mapped Address
	Starting Address: 0x00000000000
	Ending Address: 0x000300003FF
	Range Size: 786433 kB
	Physical Array Handle: 0x0024
	Partition Width: 0

Handle 0x0029, DMI type 20, 19 bytes
Memory Device Mapped Address
	Starting Address: 0x00000000000
	Ending Address: 0x0000FFFFFFF
	Range Size: 256 MB
	Physical Device Handle: 0x0025
	Memory Array Mapped Address Handle: 0x0028
	Partition Row Position: Unknown
	Interleave Position: Unknown
	Interleaved Data Depth: Unknown

00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 02)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 64
	Region 0: Memory at ec000000 (32-bit, prefetchable) [size=64M]
	Capabilities: [a0] AGP version 1.0
		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
	Kernel driver in use: agpgart-intel

00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 128
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	I/O behind bridge: 0000f000-00000fff
	Memory behind bridge: e8100000-e81fffff
	Prefetchable memory behind bridge: f0000000-f7ffffff
	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
	Region 4: I/O ports at 10a0 [size=16]
	Kernel driver in use: ata_piix

00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin D routed to IRQ 9
	Region 4: I/O ports at 1080 [size=32]
	Kernel driver in use: uhci_hcd

00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin ? routed to IRQ 9
	Kernel driver in use: piix4_smbus

00:0d.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 24)
	Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 80 (2500ns min, 2500ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 1000 [size=128]
	Region 1: Memory at e8000000 (32-bit, non-prefetchable) [size=128]
	[virtual] Expansion ROM at 30000000 [disabled] [size=128K]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: 3c59x

01:00.0 VGA compatible controller: S3 Inc. Savage 4 (rev 03) (prog-if 00 [VGA controller])
	Subsystem: Diamond Multimedia Systems Stealth III S540 Xtreme
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (1000ns min, 63750ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at e8100000 (32-bit, non-prefetchable) [size=512K]
	Region 1: Memory at f0000000 (32-bit, prefetchable) [size=128M]
	[virtual] Expansion ROM at e8180000 [disabled] [size=64K]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [80] AGP version 2.0
		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-45) ([email protected]) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun May 6 04:01:19 UTC 2012
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000040fdc00 (usable)
[    0.000000]  BIOS-e820: 00000000040fdc00 - 00000000040ff800 (ACPI data)
[    0.000000]  BIOS-e820: 00000000040ff800 - 00000000040ffc00 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000040ffc00 - 0000000030000000 (usable)
[    0.000000]  BIOS-e820: 00000000fffe7000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.1 present.
[    0.000000] last_pfn = 0x30000 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FE0000000 write-back
[    0.000000]   1 base 020000000 mask FF0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] initial memory mapped : 0 - 01800000
[    0.000000] init_memory_mapping: 0000000000000000-0000000030000000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0030000000 page 2M
[    0.000000] kernel direct mapping tables up to 30000000 @ 7000-c000
[    0.000000] RAMDISK: 028b2000 - 030fdf7f
[    0.000000] ACPI: RSDP 000f6ac0 00014 (v00 PTLTD )
[    0.000000] ACPI: RSDT 040fdd77 00028 (v01 PTLTD    RSDT   00000000 PTL  01000000)
[    0.000000] ACPI: FACP 040ff78c 00074 (v01 DELL   KHAN     19990921 PTL  000F4240)
[    0.000000] ACPI: DSDT 040fdd9f 019ED (v01  Dell    Khan   00000000 MSFT 01000004)
[    0.000000] ACPI: FACS 040ffbc0 00040
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 768MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 30000000
[    0.000000]   low ram: 0 - 30000000
[    0.000000]   node 0 low ram: 00000000 - 30000000
[    0.000000]   node 0 bootmap 00008000 - 0000e000
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 0030000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0001000000 - 00014ccd2c]    TEXT DATA BSS ==> [0001000000 - 00014ccd2c]
[    0.000000]   #4 [00028b2000 - 00030fdf7f]          RAMDISK ==> [00028b2000 - 00030fdf7f]
[    0.000000]   #5 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
[    0.000000]   #6 [00014cd000 - 00014d3104]              BRK ==> [00014cd000 - 00014d3104]
[    0.000000]   #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #8 [0000008000 - 000000e000]          BOOTMAP ==> [0000008000 - 000000e000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x00030000
[    0.000000]   HighMem  0x00030000 -> 0x00030000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000040fd
[    0.000000]     0: 0x00004100 -> 0x00030000
[    0.000000] On node 0 totalpages: 196508
[    0.000000] free_area_init_node: node 0, pgdat c13b48c0, node_mem_map c14d5000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3967 pages, LIFO batch:0
[    0.000000]   Normal zone: 1504 pages used for memmap
[    0.000000]   Normal zone: 191005 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[    0.000000] APIC: disable apic facility
[    0.000000] nr_irqs_gsi: 16
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e7000
[    0.000000] PM: Registered nosave memory: 00000000000e7000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000040fd000 - 00000000040fe000
[    0.000000] PM: Registered nosave memory: 00000000040fe000 - 00000000040ff000
[    0.000000] PM: Registered nosave memory: 00000000040ff000 - 0000000004100000
[    0.000000] PM: Registered nosave memory: 00000000040ff000 - 0000000004100000
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 30000000:cffe7000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s34328 r0 d23016 u4194304
[    0.000000] pcpu-alloc: s34328 r0 d23016 u4194304 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 194972
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=dd41da03-5ce6-4e38-a797-e214502a3c1b ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 765148k/786432k available (2506k kernel code, 20484k reserved, 1326k data, 380k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd56000 - 0xfffff000   (2724 kB)
[    0.000000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[    0.000000]     vmalloc : 0xf0800000 - 0xff3fe000   ( 235 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
[    0.000000]       .init : 0xc13bf000 - 0xc141e000   ( 380 kB)
[    0.000000]       .data : 0xc1272b8b - 0xc13be4c4   (1326 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1272b8b   (2506 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:1280
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 398.294 MHz processor.
[    0.008016] Calibrating delay loop (skipped), value calculated using timer frequency.. 796.58 BogoMIPS (lpj=1593176)
[    0.008107] Security Framework initialized
[    0.008134] SELinux:  Disabled at boot.
[    0.008175] Mount-cache hash table entries: 512
[    0.008787] Initializing cgroup subsys ns
[    0.008806] Initializing cgroup subsys cpuacct
[    0.008831] Initializing cgroup subsys devices
[    0.008846] Initializing cgroup subsys freezer
[    0.008859] Initializing cgroup subsys net_cls
[    0.008985] CPU: L1 I cache: 16K, L1 D cache: 16K
[    0.009002] CPU: L2 cache: 512K
[    0.009023] mce: CPU supports 5 MCE banks
[    0.009093] Performance Events: 
[    0.009106] no APIC, boot with the "lapic" boot parameter to force-enable it.
[    0.009119] no hardware sampling interrupt available.
[    0.009131] p6 PMU driver.
[    0.009152] ... version:                0
[    0.009163] ... bit width:              32
[    0.009174] ... generic registers:      2
[    0.009185] ... value mask:             00000000ffffffff
[    0.009198] ... max period:             000000007fffffff
[    0.009210] ... fixed-purpose events:   0
[    0.009221] ... event mask:             0000000000000003
[    0.009241] Checking 'hlt' instruction... OK.
[    0.024149] SMP alternatives: switching to UP code
[    0.038470] Freeing SMP alternatives: 13k freed
[    0.038529] ACPI: Core revision 20090903
[    0.044790] ACPI: setting ELCR to 0200 (from 0a00)
[    0.046359] Enabling APIC mode:  Flat.  Using 0 I/O APICs
[    0.046375] weird, boot CPU (#0) not listed by the BIOS.
[    0.046386] SMP motherboard not detected.
[    0.046399] Local APIC not detected. Using dummy APIC emulation.
[    0.046410] SMP disabled
[    0.047256] Brought up 1 CPUs
[    0.047272] Total of 1 processors activated (796.58 BogoMIPS).
[    0.047323] CPU0 attaching NULL sched-domain.
[    0.047978] devtmpfs: initialized
[    0.050549] regulator: core version 0.5
[    0.050872] NET: Registered protocol family 16
[    0.051461] ACPI: bus type pci registered
[    0.052577] PCI: PCI BIOS revision 2.10 entry at 0xfd9a3, last bus=1
[    0.052592] PCI: Using configuration type 1 for base access
[    0.055045] bio: create slab <bio-0> at 0
[    0.056641] ACPI: EC: Look up EC in DSDT
[    0.065584] ACPI: Interpreter enabled
[    0.065610] ACPI: (supports S0 S1 S5)
[    0.065705] ACPI: Using PIC for interrupt routing
[    0.079550] ACPI: No dock devices found.
[    0.084625] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.084835] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xec000000-0xefffffff]
[    0.085194] pci 0000:00:07.1: reg 20 io port: [0x10a0-0x10af]
[    0.085314] pci 0000:00:07.2: reg 20 io port: [0x1080-0x109f]
[    0.085391] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
[    0.085400] * this clock source is slow. Consider trying other clock sources
[    0.085484] pci 0000:00:07.3: quirk: region 8000-803f claimed by PIIX4 ACPI
[    0.085503] pci 0000:00:07.3: quirk: region 7000-700f claimed by PIIX4 SMB
[    0.085627] pci 0000:00:0d.0: reg 10 io port: [0x1000-0x107f]
[    0.085652] pci 0000:00:0d.0: reg 14 32bit mmio: [0xe8000000-0xe800007f]
[    0.085700] pci 0000:00:0d.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[    0.085755] pci 0000:00:0d.0: supports D1 D2
[    0.085770] pci 0000:00:0d.0: PME# supported from D1 D2 D3hot
[    0.085788] pci 0000:00:0d.0: PME# disabled
[    0.085928] pci 0000:01:00.0: reg 10 32bit mmio: [0xe8100000-0xe817ffff]
[    0.085954] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xf0000000-0xf7ffffff]
[    0.086000] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[    0.086063] pci 0000:01:00.0: supports D1 D2
[    0.086157] pci 0000:00:01.0: bridge 32bit mmio: [0xe8100000-0xe81fffff]
[    0.086178] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff]
[    0.086205] pci_bus 0000:00: on NUMA node 0
[    0.086229] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.089460] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.089977] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.090520] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.091045] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12)
[    0.091546] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.091564] vgaarb: loaded
[    0.091968] PCI: Using ACPI for IRQ routing
[    0.092118] Expanded resource reserved due to conflict with Adapter ROM
[    0.092611] Switching to clocksource tsc
[    0.099265] pnp: PnP ACPI init
[    0.099336] ACPI: bus type pnp registered
[    0.115254] pnp: PnP ACPI: found 11 devices
[    0.115270] ACPI: ACPI bus type pnp unregistered
[    0.115289] PnPBIOS: Disabled by ACPI PNP
[    0.115362] system 00:07: ioport range 0x7000-0x700f has been reserved
[    0.115384] system 00:07: ioport range 0x8000-0x803f has been reserved
[    0.151310] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.151327] pci 0000:00:01.0:   IO window: disabled
[    0.151347] pci 0000:00:01.0:   MEM window: 0xe8100000-0xe81fffff
[    0.151368] pci 0000:00:01.0:   PREFETCH window: 0xf0000000-0xf7ffffff
[    0.151414] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.151432] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.151451] pci_bus 0000:01: resource 1 mem: [0xe8100000-0xe81fffff]
[    0.151469] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf7ffffff]
[    0.151652] NET: Registered protocol family 2
[    0.152201] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.154596] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.160052] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.162967] TCP: Hash tables configured (established 131072 bind 65536)
[    0.162984] TCP reno registered
[    0.163659] NET: Registered protocol family 1
[    0.163765] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.164739] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[    0.164756] PCI: setting IRQ 9 as level-triggered
[    0.164778] pci 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9
[    0.164821] pci 0000:00:07.2: PCI INT D disabled
[    0.164863] pci 0000:01:00.0: Boot video device
[    0.165143] Unpacking initramfs...
[    1.646391] Freeing initrd memory: 8495k freed
[    1.696990] audit: initializing netlink socket (disabled)
[    1.697060] type=2000 audit(1347853034.696:1): initialized
[    1.723505] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.734142] VFS: Disk quotas dquot_6.5.2
[    1.734539] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.735038] msgmni has been set to 1511
[    1.736422] alg: No test for stdrng (krng)
[    1.736623] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.736643] io scheduler noop registered
[    1.736655] io scheduler anticipatory registered
[    1.736666] io scheduler deadline registered
[    1.736955] io scheduler cfq registered (default)
[    1.737817] isapnp: Scanning for PnP cards...
[    2.092235] isapnp: No Plug & Play device found
[    2.103316] Linux agpgart interface v0.103
[    2.103718] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
[    2.110784] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xec000000
[    2.111161] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.111446] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.113246] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.114026] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MICE] at 0x60,0x64 irq 1,12
[    2.116959] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.117000] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.117690] mice: PS/2 mouse device common for all mice
[    2.118214] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    2.118271] rtc0: alarms up to one month, y3k, 114 bytes nvram
[    2.118347] cpuidle: using governor ladder
[    2.118361] cpuidle: using governor menu
[    2.118389] No iBFT detected.
[    2.120990] TCP cubic registered
[    2.122162] NET: Registered protocol family 10
[    2.127628] Mobile IPv6
[    2.127649] NET: Registered protocol family 17
[    2.127746] Using IPI No-Shortcut mode
[    2.128314] PM: Resume from disk failed.
[    2.128379] registered taskstats version 1
[    2.128944] rtc_cmos 00:04: setting system clock to 2012-09-17 03:37:15 UTC (1347853035)
[    2.129208] Initalizing network drop monitor service
[    2.129344] Freeing unused kernel memory: 380k freed
[    2.131355] Write protecting the kernel text: 2508k
[    2.131476] Write protecting the kernel read-only data: 920k
[    2.140131] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.232302] udev[46]: starting version 164
[    3.045532] SCSI subsystem initialized
[    3.090449] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[    3.090468] PCI: setting IRQ 11 as level-triggered
[    3.090491] 3c59x 0000:00:0d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[    3.090537] 3c59x: Donald Becker and others.
[    3.090571] 0000:00:0d.0: 3Com PCI 3c905B Cyclone 100baseTx at f08d8000.
[    3.118454] Floppy drive(s): fd0 is 1.44M
[    3.169795] FDC 0 is a post-1991 82077
[    3.283347] usbcore: registered new interface driver usbfs
[    3.284461] usbcore: registered new interface driver hub
[    3.291706] usbcore: registered new device driver usb
[    3.489803] libata version 3.00 loaded.
[    3.553924] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.560947] ata_piix 0000:00:07.1: version 2.13
[    3.577404] scsi0 : ata_piix
[    3.578529] scsi1 : ata_piix
[    3.579207] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x10a0 irq 14
[    3.579226] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x10a8 irq 15
[    3.582278] uhci_hcd: USB Universal Host Controller Interface driver
[    3.582483] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9
[    3.582522] uhci_hcd 0000:00:07.2: UHCI Host Controller
[    3.582663] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[    3.582743] uhci_hcd 0000:00:07.2: irq 9, io base 0x00001080
[    3.583004] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    3.583024] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.583040] usb usb1: Product: UHCI Host Controller
[    3.583053] usb usb1: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    3.583067] usb usb1: SerialNumber: 0000:00:07.2
[    3.583865] usb usb1: configuration #1 chosen from 1 choice
[    3.584397] hub 1-0:1.0: USB hub found
[    3.584460] hub 1-0:1.0: 2 ports detected
[    3.759558] ata1.00: ATA-4: WDC AC36400L, 14.10R12, max UDMA/33
[    3.759580] ata1.00: 12594960 sectors, multi 16: LBA 
[    3.772423] ata1.00: configured for UDMA/33
[    3.773038] scsi 0:0:0:0: Direct-Access     ATA      WDC AC36400L     14.1 PQ: 0 ANSI: 5
[    3.780436] ata2.00: ATAPI: HITACHI GD-2000, 0056, max MWDMA2
[    3.828451] ata2.00: configured for MWDMA2
[    3.859423] scsi 1:0:0:0: CD-ROM            HITACHI  GD-2000          0056 PQ: 0 ANSI: 5
[    4.015560] sd 0:0:0:0: [sda] 12594960 512-byte logical blocks: (6.44 GB/6.00 GiB)
[    4.016207] sd 0:0:0:0: [sda] Write Protect is off
[    4.016228] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.016469] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    4.017673]  sda: sda1 sda2
[    4.067903] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.093400] sr0: scsi3-mmc drive: 8x/20x cd/rw xa/form2 cdda tray
[    4.093420] Uniform CD-ROM driver Revision: 3.20
[    4.094011] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    4.158812] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.161474] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    5.452135] PM: Starting manual resume from disk
[    5.452160] PM: Resume from partition 8:2
[    5.452170] PM: Checking hibernation image.
[    5.475834] PM: Error -22 checking image file
[    5.475847] PM: Resume from disk failed.
[    5.784386] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    8.257019] udev[217]: starting version 164
[    9.493133] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    9.566677] Marking TSC unstable due to TSC halts in idle
[    9.572247] processor LNXCPU:00: registered as cooling_device0
[    9.573404] Switching to clocksource acpi_pm
[    9.594191] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    9.594697] ACPI: Power Button [PWRF]
[    9.601892] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.930602] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   10.304502] parport_pc 00:0a: reported by Plug and Play ACPI
[   10.304561] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[   10.399067] piix4_smbus 0000:00:07.3: SMBus Host Controller at 0x7000, revision 0
[   10.851186] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[   11.214560] Error: Driver 'pcspkr' is already registered, aborting...
[   12.294439] Adding 437240k swap on /dev/sda2.  Priority:-1 extents:1 across:437240k 
[   13.220227] loop: module loaded
[   15.316926] eth0:  setting full-duplex.
[   25.928069] eth0: no IPv6 routers present