Created
October 16, 2012 01:42
-
-
Save tomari/3896822 to your computer and use it in GitHub Desktop.
Apple PowerMac 4400/200
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, | |
| 2006, 2007, 2008, 2009, 2010 | |
| The NetBSD Foundation, Inc. All rights reserved. | |
| Copyright (c) 1982, 1986, 1989, 1991, 1993 | |
| The Regents of the University of California. All rights reserved. | |
| NetBSD 5.1 (GENERIC) #0: Sat Nov 6 17:09:11 UTC 2010 | |
| [email protected]:/home/builds/ab/netbsd-5-1-RELEASE/macppc/201011061943Z-obj/home/builds/ab/netbsd-5-1-RELEASE/src/sys/arch/macppc/compile/GENERIC | |
| total memory = 81920 KB | |
| avail memory = 70064 KB | |
| timecounter: Timecounters tick every 10.000 msec | |
| found ohare PIC at f3000000 | |
| bootpath: ata/ata-disk/netbsd | |
| mainbus0 (root) | |
| cpu0 at mainbus0: 603ev (Revision 2.1), ID 0 (primary) | |
| cpu0: HID0 90c001<DOZE,DPM,ICE,DCE,NOPTI>, powersave: 1 | |
| cpu0: ohare L2 cache enabled | |
| memory0 at mainbus0 | |
| bandit0 at mainbus0 | |
| pci0 at bandit0 bus 0 | |
| pci0: i/o space, memory space enabled | |
| pchb0 at pci0 dev 11 function 0 | |
| pchb0: Apple Computer Bandit Host-PCI Bridge (rev. 0x03) | |
| tlp0 at pci0 dev 15 function 0: DECchip 21041 Ethernet, pass 2.1 | |
| tlp0: interrupting at irq 25 | |
| tlp0: Ethernet address 00:a0:40:66:ab:7e | |
| tlp0: 10baseT, 10base2, 10base5 | |
| obio0 at pci0 dev 16 function 0: addr 0xf3000000 | |
| mesh0 at obio0 offset 0x10000 irq 12: 50MHz, SCSI ID 7 | |
| scsibus0 at mesh0: 8 targets, 8 luns per target | |
| zsc0 at obio0 irq 15,16 | |
| zstty0 at zsc0 channel 0 | |
| zstty1 at zsc0 channel 1 | |
| awacs at obio0 offset 0x14000 not configured | |
| swim3 at obio0 offset 0x15000 not configured | |
| nvram0 at obio0 offset 0x60000 | |
| wdc0 at obio0 offset 0x20000 irq 13, edge triggered: DMA transfer | |
| atabus0 at wdc0 channel 0 | |
| wdc1 at obio0 offset 0x21000 irq 14, edge triggered: DMA transfer | |
| atabus1 at wdc1 channel 0 | |
| cuda0 at obio0 offset 0x16000 irq 18 | |
| nadb0 at cuda0: Apple Desktop Bus | |
| iic0 at cuda0: I2C bus | |
| machfb0 at pci0 dev 17 function 0: ATI Technologies Mach64 VT (rev. 0x40) | |
| machfb0: 16 MB aperture at 0x81000000, 0 KB registers at 0x00000000 | |
| machfb0: 2048 KB EDO DRAM 63.54 MHz, maximum RAMDAC clock 170 MHz | |
| mach64_get_mode: 1024 1088 1440 1328 768 771 806 804 | |
| machfb0: initial resolution 1024x768 at 8 bpp | |
| wsdisplay0 at machfb0 kbdmux 1: console (default, vt100 emulation) | |
| wsmux1: connecting to wsdisplay0 | |
| biomask 80000fe netmask 80000fe ttymask 80000fe | |
| timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 | |
| timecounter: Timecounter "mftb" frequency 10000000 Hz quality 100 | |
| scsibus0: waiting 2 seconds for devices to settle... | |
| adbkbd0 at nadb0 addr 2: keyboard II (Japanese layout) | |
| wskbd0 at adbkbd0: console keyboard, using wsdisplay0 | |
| wsmouse0 at adbkbd0 mux 0 | |
| adbms0 at nadb0 addr 3: 1-button, 100 dpi mouse | |
| wsmouse1 at adbms0 mux 0 | |
| adbms1 at nadb0 addr 14: 1-button, 100 dpi mouse | |
| wsmouse2 at adbms1 mux 0 | |
| adbkbd1 at nadb0 addr 15: extended keyboard | |
| wskbd1 at adbkbd1 mux 1 | |
| wskbd1: connecting to wsdisplay0 | |
| wsmouse3 at adbkbd1 mux 0 | |
| wd0 at atabus0 drive 0: <MAXTOR 6L040L2> | |
| wd0: drive supports 16-sector PIO transfers, LBA addressing | |
| wd0: 38172 MB, 77557 cyl, 16 head, 63 sec, 512 bytes/sect x 78177792 sectors | |
| wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) | |
| wd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA) | |
| atapibus0 at atabus1: 2 targets | |
| cd0 at atapibus0 drive 0: <MATSHITA CR-583, , AS10> cdrom removable | |
| cd0: drive supports PIO mode 3 | |
| cd0(wdc1:0:0): using PIO mode 3 | |
| Kernelized RAIDframe activated | |
| boot device: wd0 | |
| root on wd0a dumps on wd0b | |
| root file system type: ffs | |
| 00:0b.0 Host bridge: Apple Computer Inc. Bandit PowerPC host bridge (rev 03) | |
| Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- | |
| Latency: 32, Cache Line Size: 32 bytes | |
| 00:0f.0 Ethernet controller: Digital Equipment Corporation DECchip 21041 [Tulip Pass 3] (rev 21) | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 32 | |
| Interrupt: pin A routed to IRQ 25 | |
| Region 0: I/O ports at 0400 | |
| Region 1: Memory at 80800000 (32-bit, non-prefetchable) | |
| Expansion ROM at 80840000 [disabled] | |
| 00:10.0 Class ff00: Apple Computer Inc. O'Hare I/O (rev 01) | |
| Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx- | |
| Latency: 32, Cache Line Size: 32 bytes | |
| Region 0: Memory at f3000000 (32-bit, non-prefetchable) | |
| 00:11.0 VGA compatible controller: ATI Technologies Inc 264VT [Mach64 VT] (rev 40) (prog-if 00 [VGA controller]) | |
| Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- | |
| Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Interrupt: pin A routed to IRQ 22 | |
| Region 0: Memory at 81000000 (32-bit, non-prefetchable) | |
| Region 1: I/O ports at 0400 | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment