Dell Precision 220

gistfile1.txt

processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 8
model name	: Pentium III (Coppermine)
stepping	: 6
cpu MHz		: 864.358
cache size	: 256 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pse36 mmx fxsr sse up
bogomips	: 1728.71
clflush size	: 32
cache_alignment	: 32
address sizes	: 36 bits physical, 32 bits virtual
power management:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-46) ([email protected]) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun Sep 23 09:49:36 UTC 2012
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001ff9e000 (usable)
[    0.000000]  BIOS-e820: 000000001ff9e000 - 0000000020000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.3 present.
[    0.000000] last_pfn = 0x1ff9e max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FE0000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] initial memory mapped : 0 - 01800000
[    0.000000] init_memory_mapping: 0000000000000000-000000001ff9e000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 001fc00000 page 2M
[    0.000000]  001fc00000 - 001ff9e000 page 4k
[    0.000000] kernel direct mapping tables up to 1ff9e000 @ 7000-d000
[    0.000000] RAMDISK: 177a7000 - 17ff5a30
[    0.000000] ACPI: RSDP 000fd720 00014 (v00 DELL  )
[    0.000000] ACPI: RSDT 000fd734 0002C (v01 DELL    WS 220  00000008 ASL  00000061)
[    0.000000] ACPI: FACP 000fd760 00074 (v01 DELL    WS 220  00000008 ASL  00000061)
[    0.000000] ACPI: DSDT fffe5000 019B1 (v01   DELL    dt_ex 00001000 MSFT 0100000B)
[    0.000000] ACPI: FACS 1ff9e000 00040
[    0.000000] ACPI: APIC 000fd7d4 00068 (v01 DELL    WS 220  00000008 ASL  00000061)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 511MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 1ff9e000
[    0.000000]   low ram: 0 - 1ff9e000
[    0.000000]   node 0 low ram: 00000000 - 1ff9e000
[    0.000000]   node 0 bootmap 00002000 - 00005ff4
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 001ff9e000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0001000000 - 00014ccd0c]    TEXT DATA BSS ==> [0001000000 - 00014ccd0c]
[    0.000000]   #4 [00177a7000 - 0017ff5a30]          RAMDISK ==> [00177a7000 - 0017ff5a30]
[    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #6 [00014cd000 - 00014d319c]              BRK ==> [00014cd000 - 00014d319c]
[    0.000000]   #7 [0000007000 - 0000009000]          PGTABLE ==> [0000007000 - 0000009000]
[    0.000000]   #8 [0000002000 - 0000006000]          BOOTMAP ==> [0000002000 - 0000006000]
[    0.000000] found SMP MP-table at [c00fe710] fe710
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0001ff9e
[    0.000000]   HighMem  0x0001ff9e -> 0x0001ff9e
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x000000a0
[    0.000000]     0: 0x00000100 -> 0x0001ff9e
[    0.000000] On node 0 totalpages: 130878
[    0.000000] free_area_init_node: node 0, pgdat c13b48c0, node_mem_map c14d5000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3968 pages, LIFO batch:0
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 125886 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s34328 r0 d23016 u2097152
[    0.000000] pcpu-alloc: s34328 r0 d23016 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129854
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=a1f190df-b542-49fe-be5b-73fe22eb569d ro quiet
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 505048k/523896k available (2506k kernel code, 18112k reserved, 1326k data, 380k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd56000 - 0xfffff000   (2724 kB)
[    0.000000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[    0.000000]     vmalloc : 0xe079e000 - 0xff3fe000   ( 492 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdff9e000   ( 511 MB)
[    0.000000]       .init : 0xc13bf000 - 0xc141e000   ( 380 kB)
[    0.000000]       .data : 0xc1272b9b - 0xc13be4c4   (1326 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1272b9b   (2506 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:1280
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 864.358 MHz processor.
[    0.008013] Calibrating delay loop (skipped), value calculated using timer frequency.. 1728.71 BogoMIPS (lpj=3457432)
[    0.008065] Security Framework initialized
[    0.008085] SELinux:  Disabled at boot.
[    0.008106] Mount-cache hash table entries: 512
[    0.008488] Initializing cgroup subsys ns
[    0.008501] Initializing cgroup subsys cpuacct
[    0.008512] Initializing cgroup subsys devices
[    0.008520] Initializing cgroup subsys freezer
[    0.008527] Initializing cgroup subsys net_cls
[    0.008595] CPU: L1 I cache: 16K, L1 D cache: 16K
[    0.008602] CPU: L2 cache: 256K
[    0.008609] CPU serial number disabled.
[    0.008620] mce: CPU supports 5 MCE banks
[    0.008663] Performance Events: p6 PMU driver.
[    0.008683] ... version:                0
[    0.008688] ... bit width:              32
[    0.008694] ... generic registers:      2
[    0.008699] ... value mask:             00000000ffffffff
[    0.008705] ... max period:             000000007fffffff
[    0.008710] ... fixed-purpose events:   0
[    0.008716] ... event mask:             0000000000000003
[    0.008727] Checking 'hlt' instruction... OK.
[    0.024655] SMP alternatives: switching to UP code
[    0.031611] ACPI: Core revision 20090903
[    0.047840] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.048415] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.088109] CPU0: Intel Pentium III (Coppermine) stepping 06
[    0.092001] Brought up 1 CPUs
[    0.092001] Total of 1 processors activated (1728.71 BogoMIPS).
[    0.092001] CPU0 attaching NULL sched-domain.
[    0.092001] devtmpfs: initialized
[    0.092001] regulator: core version 0.5
[    0.092001] NET: Registered protocol family 16
[    0.092001] ACPI: bus type pci registered
[    0.116679] PCI: PCI BIOS revision 2.10 entry at 0xfc05e, last bus=2
[    0.116687] PCI: Using configuration type 1 for base access
[    0.117819] bio: create slab <bio-0> at 0
[    0.118581] ACPI: EC: Look up EC in DSDT
[    0.126591] ACPI: Interpreter enabled
[    0.126605] ACPI: (supports S0 S1 S4 S5)
[    0.126661] ACPI: Using IOAPIC for interrupt routing
[    0.133809] ACPI: No dock devices found.
[    0.133865] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.133966] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf4000000-0xf7ffffff]
[    0.134213] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[    0.134279] pci 0000:00:1f.2: reg 20 io port: [0xff80-0xff9f]
[    0.134343] pci 0000:00:1f.3: reg 20 io port: [0xdcd0-0xdcdf]
[    0.134392] pci 0000:00:1f.5: reg 10 io port: [0xd800-0xd8ff]
[    0.134404] pci 0000:00:1f.5: reg 14 io port: [0xdc80-0xdcbf]
[    0.134482] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xf8000000-0xf8ffffff]
[    0.134493] pci 0000:01:00.0: reg 14 32bit mmio: [0xfcf80000-0xfcffffff]
[    0.134516] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xc0100000-0xc013ffff]
[    0.134548] pci 0000:01:00.0: supports D1
[    0.134594] pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfdffffff]
[    0.134604] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf8000000-0xf8ffffff]
[    0.134663] pci 0000:02:0c.0: reg 10 io port: [0xec80-0xecff]
[    0.134675] pci 0000:02:0c.0: reg 14 32bit mmio: [0xfafffc00-0xfafffc7f]
[    0.134703] pci 0000:02:0c.0: reg 30 32bit mmio pref: [0xfb000000-0xfb01ffff]
[    0.134733] pci 0000:02:0c.0: supports D1 D2
[    0.134740] pci 0000:02:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.134749] pci 0000:02:0c.0: PME# disabled
[    0.134783] pci 0000:00:1e.0: transparent bridge
[    0.134792] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[    0.134801] pci 0000:00:1e.0: bridge 32bit mmio: [0xfa000000-0xfbffffff]
[    0.134821] pci_bus 0000:00: on NUMA node 0
[    0.134834] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.135253] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[    0.138564] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[    0.138982] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[    0.139408] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[    0.139822] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[    0.140149] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.140158] vgaarb: loaded
[    0.140384] PCI: Using ACPI for IRQ routing
[    0.140702] Switching to clocksource tsc
[    0.144001] pnp: PnP ACPI init
[    0.144001] ACPI: bus type pnp registered
[    0.158552] pnp: PnP ACPI: found 13 devices
[    0.158560] ACPI: ACPI bus type pnp unregistered
[    0.158573] PnPBIOS: Disabled by ACPI PNP
[    0.158605] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[    0.158615] system 00:00: iomem range 0x100000-0xffffff could not be reserved
[    0.158625] system 00:00: iomem range 0x1000000-0x1ff9dfff could not be reserved
[    0.158634] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[    0.158644] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved
[    0.158653] system 00:00: iomem range 0xfee00000-0xfee0ffff has been reserved
[    0.158663] system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved
[    0.158672] system 00:00: iomem range 0xffc00000-0xffffffff has been reserved
[    0.158698] system 00:0c: ioport range 0x800-0x85f has been reserved
[    0.158707] system 00:0c: ioport range 0xc00-0xc7f has been reserved
[    0.158716] system 00:0c: ioport range 0x860-0x8ff has been reserved
[    0.193907] pci 0000:01:00.0: BAR 6: no parent found for of device [0xc0100000-0xc013ffff]
[    0.193997] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.194004] pci 0000:00:01.0:   IO window: disabled
[    0.194014] pci 0000:00:01.0:   MEM window: 0xfc000000-0xfdffffff
[    0.194024] pci 0000:00:01.0:   PREFETCH window: 0xf8000000-0xf8ffffff
[    0.194035] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[    0.194043] pci 0000:00:1e.0:   IO window: 0xe000-0xefff
[    0.194053] pci 0000:00:1e.0:   MEM window: 0xfa000000-0xfbffffff
[    0.194061] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.194090] pci 0000:00:1e.0: setting latency timer to 64
[    0.194101] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.194109] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.194118] pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfdffffff]
[    0.194126] pci_bus 0000:01: resource 2 pref mem [0xf8000000-0xf8ffffff]
[    0.194135] pci_bus 0000:02: resource 0 io:  [0xe000-0xefff]
[    0.194142] pci_bus 0000:02: resource 1 mem: [0xfa000000-0xfbffffff]
[    0.194150] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
[    0.194158] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[    0.194257] NET: Registered protocol family 2
[    0.194542] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.195439] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.195760] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    0.196185] TCP: Hash tables configured (established 16384 bind 16384)
[    0.196194] TCP reno registered
[    0.196569] NET: Registered protocol family 1
[    0.196696] pci 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.196721] pci 0000:00:1f.2: PCI INT D disabled
[    0.196741] pci 0000:01:00.0: Boot video device
[    0.196913] Unpacking initramfs...
[    0.872925] Freeing initrd memory: 8506k freed
[    0.896827] audit: initializing netlink socket (disabled)
[    0.896878] type=2000 audit(1354377596.895:1): initialized
[    0.909370] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.913943] VFS: Disk quotas dquot_6.5.2
[    0.914131] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.914367] msgmni has been set to 1003
[    0.914974] alg: No test for stdrng (krng)
[    0.915074] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.915083] io scheduler noop registered
[    0.915089] io scheduler anticipatory registered
[    0.915095] io scheduler deadline registered
[    0.915217] io scheduler cfq registered (default)
[    0.915712] isapnp: Scanning for PnP cards...
[    1.269293] isapnp: No Plug & Play device found
[    1.273387] Linux agpgart interface v0.103
[    1.273569] agpgart-intel 0000:00:00.0: Intel i820 Chipset
[    1.279301] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf4000000
[    1.279488] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.279631] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.279788] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.280488] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.280713] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.281098] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    1.283304] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.283323] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.283593] mice: PS/2 mouse device common for all mice
[    1.283720] rtc_cmos 00:05: RTC can wake from S4
[    1.283839] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.283875] rtc0: alarms up to one day, 242 bytes nvram
[    1.283909] cpuidle: using governor ladder
[    1.283916] cpuidle: using governor menu
[    1.283929] No iBFT detected.
[    1.285175] TCP cubic registered
[    1.285625] NET: Registered protocol family 10
[    1.288101] Mobile IPv6
[    1.288111] NET: Registered protocol family 17
[    1.288154] Using IPI No-Shortcut mode
[    1.288402] PM: Resume from disk failed.
[    1.288434] registered taskstats version 1
[    1.288774] rtc_cmos 00:05: setting system clock to 2012-12-01 15:59:57 UTC (1354377597)
[    1.288912] Initalizing network drop monitor service
[    1.288991] Freeing unused kernel memory: 380k freed
[    1.289855] Write protecting the kernel text: 2508k
[    1.289916] Write protecting the kernel read-only data: 920k
[    1.312982] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.348320] udev[46]: starting version 164
[    1.754947] SCSI subsystem initialized
[    1.779301] Floppy drive(s): fd0 is 1.44M
[    1.785194] 3c59x 0000:02:0c.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.785230] 3c59x: Donald Becker and others.
[    1.785248] 0000:02:0c.0: 3Com PCI 3c905C Tornado at e08e6c00.
[    1.877270] FDC 0 is a National Semiconductor PC87306
[    1.893547] libata version 3.00 loaded.
[    1.967227] usbcore: registered new interface driver usbfs
[    1.967749] usbcore: registered new interface driver hub
[    1.968992] usbcore: registered new device driver usb
[    1.981041] ata_piix 0000:00:1f.1: version 2.13
[    1.981159] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.981366] scsi0 : ata_piix
[    1.981961] scsi1 : ata_piix
[    1.982225] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.982234] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.983172] ata2: port disabled. ignoring.
[    1.983891] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.144761] ata1.00: ATA-5: FUJITSU MPF3204AT, 0028, max UDMA/66
[    2.144771] ata1.00: 40031712 sectors, multi 8: LBA 
[    2.144833] ata1.00: limited to UDMA/33 due to 40-wire cable
[    2.160671] ata1.00: configured for UDMA/33
[    2.160996] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MPF3204A 0028 PQ: 0 ANSI: 5
[    2.183106] uhci_hcd: USB Universal Host Controller Interface driver
[    2.183293] uhci_hcd 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    2.183318] uhci_hcd 0000:00:1f.2: setting latency timer to 64
[    2.183326] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[    2.183420] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[    2.183488] uhci_hcd 0000:00:1f.2: irq 19, io base 0x0000ff80
[    2.183610] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    2.183619] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.183627] usb usb1: Product: UHCI Host Controller
[    2.183633] usb usb1: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    2.183639] usb usb1: SerialNumber: 0000:00:1f.2
[    2.184211] usb usb1: configuration #1 chosen from 1 choice
[    2.184426] hub 1-0:1.0: USB hub found
[    2.184453] hub 1-0:1.0: 2 ports detected
[    2.217081] sd 0:0:0:0: [sda] 40031712 512-byte logical blocks: (20.4 GB/19.0 GiB)
[    2.217272] sd 0:0:0:0: [sda] Write Protect is off
[    2.217281] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.217362] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.217821]  sda: sda1 sda2
[    2.254546] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.023425] PM: Starting manual resume from disk
[    3.023439] PM: Resume from partition 8:2
[    3.023444] PM: Checking hibernation image.
[    3.040262] PM: Error -22 checking image file
[    3.040269] PM: Resume from disk failed.
[    3.199472] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    5.157028] udev[228]: starting version 164
[    5.969123] input: PC Speaker as /devices/platform/pcspkr/input/input1
[    6.060346] processor LNXCPU:00: registered as cooling_device0
[    6.405390] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    6.418029] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    6.418264] ACPI: Power Button [PWRF]
[    6.442258] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    6.563358] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.005444] parport_pc 00:0b: reported by Plug and Play ACPI
[    7.005564] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[    7.042028] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    7.075243] Intel 82802 RNG detected
[    7.386303] Error: Driver 'pcspkr' is already registered, aborting...
[    7.465127] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    7.465162] Intel ICH 0000:00:1f.5: setting latency timer to 64
[    8.136032] intel8x0_measure_ac97_clock: measured 54507 usecs (2620 samples)
[    8.136043] intel8x0: clocking to 48000
[    8.906491] Adding 971768k swap on /dev/sda2.  Priority:-1 extents:1 across:971768k 
[    9.587747] loop: module loaded
[   11.461357] eth0:  setting full-duplex.
[   12.009522] microcode: CPU0 sig=0x686, pf=0x1, revision=0x7
[   12.009540] platform microcode: firmware: requesting intel-ucode/06-08-06
[   12.137264] Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[   22.020018] eth0: no IPv6 routers present
[   69.207769] eth0:  setting full-duplex.
[   79.744032] eth0: no IPv6 routers present
# dmidecode 2.9
SMBIOS 2.3 present.
110 structures occupying 3443 bytes.
Table at 0x000F0450.

Handle 0xDA00, DMI type 218, 59 bytes
OEM-specific Type
	Header and Data:
		DA 3B 00 DA B2 00 17 0B 0E 18 00 00 00 00 80 01
		00 00 00 02 80 01 00 00 00 00 A0 01 00 58 00 58
		00 01 00 59 00 59 00 01 00 05 80 05 80 01 00 20
		FC 20 FC 00 00 FF FF 00 00 00 00

Handle 0xDA02, DMI type 218, 137 bytes
OEM-specific Type
	Header and Data:
		DA 89 02 DA B2 00 17 0B 0E 18 00 00 00 20 F4 00
		00 00 00 10 F4 00 00 00 00 30 F4 00 00 00 00 40
		F4 00 00 00 00 21 F4 00 00 00 00 11 F4 00 00 00
		00 31 F4 00 00 00 00 41 F4 00 00 00 00 22 F4 00
		00 00 00 12 F4 00 00 00 00 32 F4 00 00 00 00 42
		F4 00 00 00 00 23 F4 00 00 00 00 13 F4 00 00 00
		00 33 F4 00 00 00 00 43 F4 00 00 00 00 24 F4 00
		00 00 00 14 F4 00 00 00 00 34 F4 00 00 00 00 44
		F4 00 00 FF FF 00 00 00 00

Handle 0xDA03, DMI type 218, 137 bytes
OEM-specific Type
	Header and Data:
		DA 89 03 DA B2 00 17 0B 0E 18 00 00 00 25 F4 00
		00 00 00 15 F4 00 00 00 00 35 F4 00 00 00 00 45
		F4 00 00 00 00 26 F4 00 00 00 00 16 F4 00 00 00
		00 36 F4 00 00 00 00 46 F4 00 00 00 00 27 F4 00
		00 00 00 17 F4 00 00 00 00 37 F4 00 00 00 00 47
		F4 00 00 00 00 28 F4 00 00 00 00 18 F4 00 00 00
		00 38 F4 00 00 00 00 48 F4 00 00 00 00 29 F4 00
		00 00 00 19 F4 00 00 00 00 39 F4 00 00 00 00 49
		F4 00 00 FF FF 00 00 00 00

Handle 0xDA04, DMI type 218, 77 bytes
OEM-specific Type
	Header and Data:
		DA 4D 04 DA B2 00 17 0B 0E 18 00 00 00 2A F4 00
		00 00 00 1A F4 00 00 00 00 3A F4 00 00 00 00 4A
		F4 00 00 00 00 20 F3 00 00 00 00 10 F3 00 00 00
		00 30 F3 00 00 00 00 21 F3 00 00 00 00 11 F3 00
		00 00 00 31 F3 00 00 FF FF 00 00 00 00

Handle 0xDA05, DMI type 218, 17 bytes
OEM-specific Type
	Header and Data:
		DA 11 05 DA B2 00 17 0B 0E 18 00 FF FF 00 00 00
		00

Handle 0xDA06, DMI type 218, 137 bytes
OEM-specific Type
	Header and Data:
		DA 89 06 DA B2 00 17 0B 0E 18 00 00 00 20 F9 00
		00 00 00 10 F9 00 00 00 00 30 F9 00 00 00 00 40
		F9 00 00 21 F9 21 F9 00 00 11 F9 11 F9 00 00 31
		F9 31 F9 00 00 41 F9 41 F9 00 00 22 F9 22 F9 00
		00 12 F9 12 F9 00 00 32 F9 32 F9 00 00 42 F9 42
		F9 00 00 23 F9 23 F9 00 00 13 F9 13 F9 00 00 33
		F9 33 F9 00 00 43 F9 43 F9 00 00 24 F9 24 F9 00
		00 14 F9 14 F9 00 00 34 F9 34 F9 00 00 44 F9 44
		F9 00 00 FF FF 00 00 00 00

Handle 0xDA07, DMI type 218, 41 bytes
OEM-specific Type
	Header and Data:
		DA 29 07 DA B2 00 17 0B 0E 18 00 25 F9 25 F9 00
		00 15 F9 15 F9 00 00 35 F9 35 F9 00 00 45 F9 45
		F9 00 00 FF FF 00 00 00 00

Handle 0xDA08, DMI type 218, 53 bytes
OEM-specific Type
	Header and Data:
		DA 35 08 DA B2 00 17 0B 0E 18 00 20 F6 20 F6 00
		00 10 F6 10 F6 00 00 30 F6 30 F6 00 00 00 00 20
		F7 00 00 00 00 10 F7 00 00 00 00 30 F7 00 00 FF
		FF 00 00 00 00

Handle 0x0000, DMI type 0, 20 bytes
BIOS Information
	Vendor: Dell Computer Corporation
	Version: A13
	Release Date: 04/01/2002
	Address: 0xF0000
	Runtime Size: 64 kB
	ROM Size: 512 kB
	Characteristics:
		PCI is supported
		PNP is supported
		APM is supported
		BIOS is upgradeable
		BIOS shadowing is allowed
		ESCD support is available
		Boot from CD is supported
		Selectable boot is supported
		EDD is supported
		Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
		5.25"/360 KB floppy services are supported (int 13h)
		5.25"/1.2 MB floppy services are supported (int 13h)
		3.5"/720 KB floppy services are supported (int 13h)
		3.5"/2.88 MB floppy services are supported (int 13h)
		Print screen service is supported (int 5h)
		8042 keyboard services are supported (int 9h)
		Serial services are supported (int 14h)
		Printer services are supported (int 17h)
		CGA/mono video services are supported (int 10h)
		ACPI is supported
		USB legacy is supported
		AGP is supported
		LS-120 boot is supported
		ATAPI Zip drive boot is supported
		BIOS boot specification is supported
		Function key-initiated network boot is supported

Handle 0x0100, DMI type 1, 25 bytes
System Information
	Manufacturer: Dell Computer Corporation
	Product Name: Precision WorkStation 220    
	Version: Not Specified
	Serial Number: 843L31S
	UUID: 44454C4C-3495-1033-804C-B8C04F333153
	Wake-up Type: Power Switch

Handle 0x0200, DMI type 2, 8 bytes
Base Board Information
	Manufacturer: Dell Computer Corporation
	Product Name: Precision WorkStation 220    
	Version: Not Specified
	Serial Number: Not Specified

Handle 0x0300, DMI type 3, 13 bytes
Chassis Information
	Manufacturer: Dell Computer Corporation
	Type: Mini Tower
	Lock: Not Present
	Version: Not Specified
	Serial Number: 843L31S
	Asset Tag: Not Specified
	Boot-up State: Safe
	Power Supply State: Safe
	Thermal State: Warning
	Security Status: Unknown

Handle 0x0400, DMI type 4, 32 bytes
Processor Information
	Socket Designation: Microprocessor
	Type: Central Processor
	Family: Pentium III
	Manufacturer: Intel
	ID: 86 06 00 00 FF FB 87 03
	Signature: Type 0, Family 6, Model 8, Stepping 6
	Flags:
		FPU (Floating-point unit on-chip)
		VME (Virtual mode extension)
		DE (Debugging extension)
		PSE (Page size extension)
		TSC (Time stamp counter)
		MSR (Model specific registers)
		PAE (Physical address extension)
		MCE (Machine check exception)
		CX8 (CMPXCHG8 instruction supported)
		APIC (On-chip APIC hardware supported)
		SEP (Fast system call)
		MTRR (Memory type range registers)
		PGE (Page global enable)
		MCA (Machine check architecture)
		CMOV (Conditional move instruction supported)
		PAT (Page attribute table)
		PSE-36 (36-bit page size extension)
		PSN (Processor serial number present and enabled)
		MMX (MMX technology supported)
		FXSR (Fast floating-point save and restore)
		SSE (Streaming SIMD extensions)
	Version: Not Specified
	Voltage: 3.3 V 2.9 V
	External Clock: 133 MHz
	Max Speed: 1066 MHz
	Current Speed: 866 MHz
	Status: Populated, Enabled
	Upgrade: Slot 1
	L1 Cache Handle: 0x0700
	L2 Cache Handle: 0x0701
	L3 Cache Handle: Not Provided

Handle 0x0401, DMI type 4, 32 bytes
Processor Information
	Socket Designation: Microprocessor
	Type: Central Processor
	Family: Pentium II
	Manufacturer: Intel
	ID: 00 00 00 00 00 00 00 00
	Signature: Type 0, Family 0, Model 0, Stepping 0
	Flags: None
	Version: Not Specified
	Voltage: 3.3 V 2.9 V
	External Clock: 100 MHz
	Max Speed: 1066 MHz
	Current Speed: Unknown
	Status: Unpopulated
	Upgrade: Slot 1
	L1 Cache Handle: 0x0702
	L2 Cache Handle: 0x0703
	L3 Cache Handle: Not Provided

Handle 0x0700, DMI type 7, 19 bytes
Cache Information
	Socket Designation: Not Specified
	Configuration: Enabled, Not Socketed, Level 1
	Operational Mode: Varies With Memory Address
	Location: Internal
	Installed Size: 32 KB
	Maximum Size: 32 KB
	Supported SRAM Types:
		Unknown
	Installed SRAM Type: Unknown
	Speed: Unknown
	Error Correction Type: Unknown
	System Type: Unified
	Associativity: Unknown

Handle 0x0701, DMI type 7, 19 bytes
Cache Information
	Socket Designation: Not Specified
	Configuration: Enabled, Not Socketed, Level 2
	Operational Mode: Varies With Memory Address
	Location: Internal
	Installed Size: 256 KB
	Maximum Size: 256 KB
	Supported SRAM Types:
		Unknown
	Installed SRAM Type: Unknown
	Speed: Unknown
	Error Correction Type: Unknown
	System Type: Unified
	Associativity: 4-way Set-associative

Handle 0x0702, DMI type 7, 19 bytes
Cache Information
	Socket Designation: Not Specified
	Configuration: Enabled, Not Socketed, Level 1
	Operational Mode: Varies With Memory Address
	Location: Internal
	Installed Size: 32 KB
	Maximum Size: 32 KB
	Supported SRAM Types:
		Unknown
	Installed SRAM Type: Unknown
	Speed: Unknown
	Error Correction Type: Unknown
	System Type: Unified
	Associativity: Unknown

Handle 0x0703, DMI type 7, 19 bytes
Cache Information
	Socket Designation: Not Specified
	Configuration: Enabled, Not Socketed, Level 2
	Operational Mode: Varies With Memory Address
	Location: Internal
	Installed Size: 0 KB
	Maximum Size: 0 KB
	Supported SRAM Types:
		Unknown
	Installed SRAM Type: Unknown
	Speed: Unknown
	Error Correction Type: Unknown
	System Type: Unified
	Associativity: 4-way Set-associative

Handle 0x0800, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: PARALLEL
	Internal Connector Type: None
	External Reference Designator: Not Specified
	External Connector Type: DB-25 female
	Port Type: Parallel Port PS/2

Handle 0x0801, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SERIAL1
	Internal Connector Type: None
	External Reference Designator: Not Specified
	External Connector Type: DB-9 male
	Port Type: Serial Port 16550A Compatible

Handle 0x0802, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SERIAL2
	Internal Connector Type: None
	External Reference Designator: Not Specified
	External Connector Type: DB-9 male
	Port Type: Serial Port 16550A Compatible

Handle 0x0803, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: KYBD
	Internal Connector Type: None
	External Reference Designator: Not Specified
	External Connector Type: PS/2
	Port Type: Keyboard Port

Handle 0x0804, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: MOUSE
	Internal Connector Type: None
	External Reference Designator: Not Specified
	External Connector Type: Mini DIN
	Port Type: Mouse Port

Handle 0x0805, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB1
	Internal Connector Type: None
	External Reference Designator: Not Specified
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x0806, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB2
	Internal Connector Type: None
	External Reference Designator: Not Specified
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x0807, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: ENET
	Internal Connector Type: None
	External Reference Designator: Not Specified
	External Connector Type: RJ-45
	Port Type: Network Port

Handle 0x0808, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: MIC
	Internal Connector Type: None
	External Reference Designator: Not Specified
	External Connector Type: Mini Jack (headphones)
	Port Type: Audio Port

Handle 0x0809, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: LINE-OUT
	Internal Connector Type: None
	External Reference Designator: Not Specified
	External Connector Type: Mini Jack (headphones)
	Port Type: Audio Port

Handle 0x080A, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: LINE-IN
	Internal Connector Type: None
	External Reference Designator: Not Specified
	External Connector Type: Mini Jack (headphones)
	Port Type: Audio Port

Handle 0x0901, DMI type 9, 13 bytes
System Slot Information
	Designation: PCI1
	Type: 32-bit PCI
	Current Usage: Available
	Length: Long
	ID: 1
	Characteristics:
		5.0 V is provided
		3.3 V is provided
		PME signal is supported

Handle 0x0902, DMI type 9, 13 bytes
System Slot Information
	Designation: PCI2
	Type: 32-bit PCI
	Current Usage: Available
	Length: Long
	ID: 2
	Characteristics:
		5.0 V is provided
		3.3 V is provided
		PME signal is supported

Handle 0x0903, DMI type 9, 13 bytes
System Slot Information
	Designation: PCI3
	Type: 32-bit PCI
	Current Usage: Available
	Length: Long
	ID: 3
	Characteristics:
		5.0 V is provided
		3.3 V is provided
		PME signal is supported

Handle 0x0904, DMI type 9, 13 bytes
System Slot Information
	Designation: PCI4
	Type: 32-bit PCI
	Current Usage: Available
	Length: Long
	ID: 4
	Characteristics:
		5.0 V is provided
		3.3 V is provided
		PME signal is supported

Handle 0x0905, DMI type 9, 13 bytes
System Slot Information
	Designation: PCI5
	Type: 32-bit PCI
	Current Usage: Available
	Length: Long
	ID: 5
	Characteristics:
		5.0 V is provided
		3.3 V is provided
		PME signal is supported

Handle 0x0906, DMI type 126, 13 bytes
Inactive

Handle 0x0907, DMI type 126, 13 bytes
Inactive

Handle 0x0908, DMI type 126, 13 bytes
Inactive

Handle 0x0909, DMI type 126, 13 bytes
Inactive

Handle 0x090A, DMI type 9, 13 bytes
System Slot Information
	Designation: AGP1
	Type: 32-bit AGP 4x
	Current Usage: In Use
	Length: Long
	ID: 0
	Characteristics:
		3.3 V is provided
		PME signal is supported

Handle 0x0A01, DMI type 10, 8 bytes
On Board Device 1 Information
	Type: Ethernet
	Status: Enabled
	Description: 3Com Fast EtherLink XL 10/100Mb TX
On Board Device 2 Information
	Type: Sound
	Status: Enabled
	Description: AC'97 Audio Controller

Handle 0x0B00, DMI type 11, 5 bytes
OEM Strings
	String 1: www.dell.com

Handle 0x0D00, DMI type 13, 22 bytes
BIOS Language Information
	Installable Languages: 1
		en|US|iso8859-1
	Currently Installed Language: en|US|iso8859-1

Handle 0x0E00, DMI type 126, 11 bytes
Inactive

Handle 0x0E01, DMI type 126, 11 bytes
Inactive

Handle 0x0E02, DMI type 126, 11 bytes
Inactive

Handle 0x0E03, DMI type 126, 11 bytes
Inactive

Handle 0x1000, DMI type 16, 15 bytes
Physical Memory Array
	Location: System Board Or Motherboard
	Use: System Memory
	Error Correction Type: Single-bit ECC
	Maximum Capacity: 1 GB
	Error Information Handle: No Error
	Number Of Devices: 2

Handle 0x1100, DMI type 17, 23 bytes
Memory Device
	Array Handle: 0x1000
	Error Information Handle: No Error
	Total Width: 18 bits
	Data Width: 16 bits
	Size: 256 MB
	Form Factor: RIMM
	Set: None
	Locator: RIMM_A
	Bank Locator: Not Specified
	Type: RDRAM
	Type Detail: RAMBus
	Speed: 400 MHz (2.5 ns)

Handle 0x1101, DMI type 17, 23 bytes
Memory Device
	Array Handle: 0x1000
	Error Information Handle: No Error
	Total Width: 18 bits
	Data Width: 16 bits
	Size: 256 MB
	Form Factor: RIMM
	Set: None
	Locator: RIMM_B
	Bank Locator: Not Specified
	Type: RDRAM
	Type Detail: RAMBus
	Speed: 400 MHz (2.5 ns)

Handle 0x1200, DMI type 126, 23 bytes
Inactive

Handle 0x1301, DMI type 19, 15 bytes
Memory Array Mapped Address
	Starting Address: 0x00000000000
	Ending Address: 0x0001FFFFFFF
	Range Size: 512 MB
	Physical Array Handle: 0x1000
	Partition Width: 0

Handle 0x1402, DMI type 20, 19 bytes
Memory Device Mapped Address
	Starting Address: 0x00000000000
	Ending Address: 0x0000FFFFFFF
	Range Size: 256 MB
	Physical Device Handle: 0x1100
	Memory Array Mapped Address Handle: 0x1301
	Partition Row Position: 1

Handle 0x1403, DMI type 20, 19 bytes
Memory Device Mapped Address
	Starting Address: 0x00010000000
	Ending Address: 0x0001FFFFFFF
	Range Size: 256 MB
	Physical Device Handle: 0x1101
	Memory Array Mapped Address Handle: 0x1301
	Partition Row Position: 1

Handle 0x1800, DMI type 24, 5 bytes
Hardware Security
	Power-On Password Status: Enabled
	Keyboard Password Status: Not Implemented
	Administrator Password Status: Enabled
	Front Panel Reset Status: Enabled

Handle 0x1900, DMI type 25, 9 bytes
	System Power Controls
	Next Scheduled Power-on: *-* 00:00:00

Handle 0x1A0F, DMI type 126, 20 bytes
Inactive

Handle 0x1A10, DMI type 126, 20 bytes
Inactive

Handle 0x1A06, DMI type 126, 20 bytes
Inactive

Handle 0x1A07, DMI type 126, 20 bytes
Inactive

Handle 0x1A08, DMI type 126, 20 bytes
Inactive

Handle 0x1A09, DMI type 126, 20 bytes
Inactive

Handle 0x1A0A, DMI type 126, 20 bytes
Inactive

Handle 0x1A0B, DMI type 126, 20 bytes
Inactive

Handle 0x1A0C, DMI type 126, 20 bytes
Inactive

Handle 0x1A0D, DMI type 126, 20 bytes
Inactive

Handle 0x1A0E, DMI type 126, 20 bytes
Inactive

Handle 0x1A11, DMI type 126, 20 bytes
Inactive

Handle 0x1A12, DMI type 26, 20 bytes
Voltage Probe
	Description: Vccp1
	Location: Motherboard
	Status: OK
	Maximum Value: 3.586 V
	Minimum Value: 0.000 V
	Resolution: 14.0 mV
	Tolerance: Unknown
	Accuracy: Unknown
	OEM-specific Information: 0x0000DC16

Handle 0x1A13, DMI type 26, 20 bytes
Voltage Probe
	Description: 2.5V
	Location: Motherboard
	Status: OK
	Maximum Value: 4.383 V
	Minimum Value: 0.000 V
	Resolution: 17.0 mV
	Tolerance: Unknown
	Accuracy: Unknown
	OEM-specific Information: 0x0000DC17

Handle 0x1A14, DMI type 26, 20 bytes
Voltage Probe
	Description: 3.3V
	Location: Motherboard
	Status: OK
	Maximum Value: 6.641 V
	Minimum Value: 0.000 V
	Resolution: 26.0 mV
	Tolerance: Unknown
	Accuracy: Unknown
	OEM-specific Information: 0x0000DC18

Handle 0x1A15, DMI type 26, 20 bytes
Voltage Probe
	Description: 5V
	Location: Motherboard
	Status: OK
	Maximum Value: 15.930 V
	Minimum Value: 0.000 V
	Resolution: 62.0 mV
	Tolerance: Unknown
	Accuracy: Unknown
	OEM-specific Information: 0x0000DC19

Handle 0x1A16, DMI type 26, 20 bytes
Voltage Probe
	Description: 1.5V GTL
	Location: Motherboard
	Status: OK
	Maximum Value: 3.586 V
	Minimum Value: 0.000 V
	Resolution: 14.0 mV
	Tolerance: Unknown
	Accuracy: Unknown
	OEM-specific Information: 0x0000DC1A

Handle 0x1B02, DMI type 27, 12 bytes
Cooling Device
	Type: Fan
	Status: Non-critical
	OEM-specific Information: 0x0000DD00

Handle 0x1C01, DMI type 126, 20 bytes
Inactive

Handle 0x1C02, DMI type 126, 20 bytes
Inactive

Handle 0x1C06, DMI type 28, 20 bytes
Temperature Probe
	Description: CPU0
	Location: Processor Module
	Status: OK
	Maximum Value: 127.0 deg C
	Minimum Value -127.0 deg C
	Resolution: 1.000 deg C
	Tolerance: Unknown
	Accuracy: Unknown
	OEM-specific Information: 0x0000DC1C

Handle 0x1C07, DMI type 126, 20 bytes
Inactive

Handle 0x2000, DMI type 32, 11 bytes
System Boot Information
	Status: Firmware-detected hardware failure

Handle 0x2500, DMI type 37, 13 bytes
Memory Channel
	Type: RamBus
	Maximal Load: 32
	Devices: 2
	Device 1 Load: 16
	Device 1 Handle: 0x1101
	Device 2 Load: 0
	Device 2 Handle: 0xD000

Handle 0xD000, DMI type 208, 10 bytes
OEM-specific Type
	Header and Data:
		D0 0A 00 D0 01 03 95 00 00 00

Handle 0xD100, DMI type 209, 12 bytes
OEM-specific Type
	Header and Data:
		D1 0C 00 D1 78 03 07 03 04 0F 80 05

Handle 0xD200, DMI type 210, 12 bytes
OEM-specific Type
	Header and Data:
		D2 0C 00 D2 F8 03 04 03 06 80 04 05

Handle 0xD201, DMI type 210, 12 bytes
OEM-specific Type
	Header and Data:
		D2 0C 01 D2 F8 02 03 03 06 80 04 05

Handle 0xD400, DMI type 212, 152 bytes
OEM-specific Type
	Header and Data:
		D4 98 00 D4 70 00 71 00 00 10 2D 2E 42 00 11 FE
		01 43 00 11 FE 00 51 00 26 3F 00 52 00 26 3F 40
		53 00 26 3F 80 54 00 26 3F C0 0F 00 25 FC 00 10
		00 25 FC 01 11 00 25 FC 02 12 00 25 FC 03 13 00
		25 F3 00 14 00 25 F3 04 15 00 25 F3 08 16 00 25
		F3 0C 07 00 23 8F 00 08 00 23 F3 00 09 00 23 F3
		04 0A 00 23 F3 08 0B 00 23 8F 10 0C 00 23 8F 20
		0E 00 23 8F 30 0D 00 23 8C 40 03 00 11 7F 80 04
		00 11 7F 00 90 00 11 CF 00 91 00 11 CF 20 92 00
		11 CF 10 FF FF 00 00 00

Handle 0xD401, DMI type 212, 152 bytes
OEM-specific Type
	Header and Data:
		D4 98 01 D4 70 00 71 00 03 40 59 6D 2D 00 59 FC
		02 2E 00 59 FC 00 6E 00 59 FC 01 28 00 59 3F 00
		29 00 59 3F 40 2A 00 59 3F 80 2B 00 5A 00 00 2C
		00 5B 00 00 55 00 59 EF 00 6D 00 59 EF 10 5C 00
		78 BF 40 5D 00 78 BF 00 04 80 78 F5 0A 01 A0 78
		F5 00 1C 00 55 FB 04 1D 00 55 FB 00 19 00 55 E7
		00 1A 00 55 E7 08 1B 00 55 E7 10 1E 00 55 FD 00
		50 00 55 FD 02 93 00 7B 7F 80 94 00 7B 7F 00 23
		00 55 7F 00 22 00 55 7F 80 00 C0 5C 00 0A 03 C0
		67 00 05 FF FF 00 00 00

Handle 0xDC12, DMI type 220, 22 bytes
OEM-specific Type
	Header and Data:
		DC 16 12 DC 20 F4 00 00 10 F4 00 00 00 00 30 F4
		40 F4 00 00 00 00

Handle 0xDC13, DMI type 220, 22 bytes
OEM-specific Type
	Header and Data:
		DC 16 13 DC 21 F4 00 00 11 F4 00 00 00 00 31 F4
		41 F4 00 00 00 00

Handle 0xDC07, DMI type 220, 22 bytes
OEM-specific Type
	Header and Data:
		DC 16 07 DC 22 F4 00 00 12 F4 00 00 00 00 32 F4
		42 F4 00 00 00 00

Handle 0xDC08, DMI type 220, 22 bytes
OEM-specific Type
	Header and Data:
		DC 16 08 DC 23 F4 00 00 13 F4 00 00 00 00 33 F4
		43 F4 00 00 00 00

Handle 0xDC09, DMI type 220, 22 bytes
OEM-specific Type
	Header and Data:
		DC 16 09 DC 24 F4 00 00 14 F4 00 00 00 00 34 F4
		44 F4 00 00 00 00

Handle 0xDC0A, DMI type 220, 22 bytes
OEM-specific Type
	Header and Data:
		DC 16 0A DC 25 F4 00 00 15 F4 00 00 00 00 35 F4
		45 F4 00 00 00 00

Handle 0xDC0B, DMI type 220, 22 bytes
OEM-specific Type
	Header and Data:
		DC 16 0B DC 26 F4 00 00 16 F4 00 00 00 00 36 F4
		46 F4 00 00 00 00

Handle 0xDC0C, DMI type 220, 22 bytes
OEM-specific Type
	Header and Data:
		DC 16 0C DC 27 F4 00 00 17 F4 00 00 00 00 37 F4
		47 F4 00 00 00 00

Handle 0xDC0D, DMI type 220, 22 bytes
OEM-specific Type
	Header and Data:
		DC 16 0D DC 28 F4 00 00 18 F4 00 00 00 00 38 F4
		48 F4 00 00 00 00

Handle 0xDC0E, DMI type 220, 22 bytes
OEM-specific Type
	Header and Data:
		DC 16 0E DC 29 F4 00 00 19 F4 00 00 00 00 39 F4
		49 F4 00 00 00 00

Handle 0xDC0F, DMI type 220, 22 bytes
OEM-specific Type
	Header and Data:
		DC 16 0F DC 2A F4 00 00 1A F4 00 00 00 00 3A F4
		4A F4 00 00 00 00

Handle 0xDC10, DMI type 220, 22 bytes
OEM-specific Type
	Header and Data:
		DC 16 10 DC 20 F3 00 00 10 F3 00 00 00 00 30 F3
		00 00 00 00 00 00

Handle 0xDC11, DMI type 220, 22 bytes
OEM-specific Type
	Header and Data:
		DC 16 11 DC 21 F3 00 00 11 F3 00 00 00 00 31 F3
		00 00 00 00 00 00

Handle 0xDC15, DMI type 220, 22 bytes
OEM-specific Type
	Header and Data:
		DC 16 15 DC 20 F9 00 00 10 F9 00 00 00 00 30 F9
		40 F9 00 00 00 00

Handle 0xDC16, DMI type 220, 22 bytes
OEM-specific Type
	Header and Data:
		DC 16 16 DC 21 F9 00 00 11 F9 00 00 00 00 31 F9
		41 F9 00 00 00 00

Handle 0xDC17, DMI type 220, 22 bytes
OEM-specific Type
	Header and Data:
		DC 16 17 DC 22 F9 00 00 12 F9 00 00 00 00 32 F9
		42 F9 00 00 00 00

Handle 0xDC18, DMI type 220, 22 bytes
OEM-specific Type
	Header and Data:
		DC 16 18 DC 23 F9 00 00 13 F9 00 00 00 00 33 F9
		43 F9 00 00 00 00

Handle 0xDC19, DMI type 220, 22 bytes
OEM-specific Type
	Header and Data:
		DC 16 19 DC 24 F9 00 00 14 F9 00 00 00 00 34 F9
		44 F9 00 00 00 00

Handle 0xDC1A, DMI type 220, 22 bytes
OEM-specific Type
	Header and Data:
		DC 16 1A DC 25 F9 00 00 15 F9 00 00 00 00 35 F9
		45 F9 00 00 00 00

Handle 0xDC1C, DMI type 220, 22 bytes
OEM-specific Type
	Header and Data:
		DC 16 1C DC 20 F6 00 00 10 F6 00 00 00 00 30 F6
		00 00 00 00 00 00

Handle 0xDC1D, DMI type 220, 22 bytes
OEM-specific Type
	Header and Data:
		DC 16 1D DC 20 F7 00 00 10 F7 00 00 00 00 30 F7
		00 00 00 00 00 00

Handle 0xDD00, DMI type 221, 19 bytes
OEM-specific Type
	Header and Data:
		DD 13 00 DD 00 00 00 00 00 20 FC 00 00 00 00 00
		00 00 00

Handle 0xDE00, DMI type 222, 13 bytes
OEM-specific Type
	Header and Data:
		DE 0D 00 DE C1 01 FF FF 00 00 00 00 00

Handle 0xDF00, DMI type 223, 33 bytes
OEM-specific Type
	Header and Data:
		DF 21 00 DF 0C 00 11 CE 59 39 45 31 44 30 30 25
		64 E2 14 01 11 CE 59 39 44 33 43 30 30 21 9B BF
		1C

Handle 0x7F00, DMI type 127, 4 bytes
End Of Table

00:00.0 Host bridge: Intel Corporation 82820 820 (Camino) Chipset Host Bridge (MCH) (rev 04)
	Subsystem: Dell Precision Workstation 220 Chipset
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M]
	Capabilities: [a0] AGP version 2.0
		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
	Kernel driver in use: agpgart-intel

00:01.0 PCI bridge: Intel Corporation 82820 820 (Camino) Chipset AGP Bridge (rev 04) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	I/O behind bridge: 0000f000-00000fff
	Memory behind bridge: fc000000-fdffffff
	Prefetchable memory behind bridge: f8000000-f8ffffff
	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:1e.0 PCI bridge: Intel Corporation 82801AA PCI Bridge (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: fa000000-fbffffff
	Prefetchable memory behind bridge: fff00000-000fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:1f.0 ISA bridge: Intel Corporation 82801AA ISA Bridge (LPC) (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:1f.1 IDE interface: Intel Corporation 82801AA IDE Controller (rev 02) (prog-if 80 [Master])
	Subsystem: Intel Corporation 82801AA IDE Controller
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
	Region 4: I/O ports at ffa0 [size=16]
	Kernel driver in use: ata_piix

00:1f.2 USB Controller: Intel Corporation 82801AA USB Controller (rev 02) (prog-if 00 [UHCI])
	Subsystem: Intel Corporation 82801AA USB Controller
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 19
	Region 4: I/O ports at ff80 [size=32]
	Kernel driver in use: uhci_hcd

00:1f.3 SMBus: Intel Corporation 82801AA SMBus Controller (rev 02)
	Subsystem: Intel Corporation 82801AA SMBus Controller
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 17
	Region 4: I/O ports at dcd0 [size=16]
	Kernel driver in use: i801_smbus

00:1f.5 Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio Controller (rev 02)
	Subsystem: Dell Precision Workstation 220 Integrated Digital Audio
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 17
	Region 0: I/O ports at d800 [size=256]
	Region 1: I/O ports at dc80 [size=64]
	Kernel driver in use: Intel ICH

01:00.0 VGA compatible controller: Intel Corporation 82740 (i740) AGP Graphics Accelerator (rev 21) (prog-if 00 [VGA controller])
	Subsystem: Diamond Multimedia Systems Stealth II G460
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 9
	Region 0: Memory at f8000000 (32-bit, prefetchable) [size=16M]
	Region 1: Memory at fcf80000 (32-bit, non-prefetchable) [size=512K]
	Expansion ROM at fc000000 [disabled] [size=256K]
	Capabilities: [d0] AGP version 1.0
		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

02:0c.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
	Subsystem: Dell 3C920 Integrated Fast Ethernet Controller
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (2500ns min, 2500ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: I/O ports at ec80 [size=128]
	Region 1: Memory at fafffc00 (32-bit, non-prefetchable) [size=128]
	Expansion ROM at fb000000 [disabled] [size=128K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
	Kernel driver in use: 3c59x