Created
December 8, 2012 08:41
-
-
Save tomari/4239312 to your computer and use it in GitHub Desktop.
Dell Vostro 400
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| processor : 0 | |
| vendor_id : GenuineIntel | |
| cpu family : 6 | |
| model : 15 | |
| model name : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz | |
| stepping : 11 | |
| microcode : 0xba | |
| cpu MHz : 2400.000 | |
| cache size : 4096 KB | |
| physical id : 0 | |
| siblings : 4 | |
| core id : 0 | |
| cpu cores : 4 | |
| apicid : 0 | |
| initial apicid : 0 | |
| fpu : yes | |
| fpu_exception : yes | |
| cpuid level : 10 | |
| wp : yes | |
| flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dts tpr_shadow vnmi flexpriority | |
| bogomips : 4788.05 | |
| clflush size : 64 | |
| cache_alignment : 64 | |
| address sizes : 36 bits physical, 48 bits virtual | |
| power management: | |
| processor : 1 | |
| vendor_id : GenuineIntel | |
| cpu family : 6 | |
| model : 15 | |
| model name : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz | |
| stepping : 11 | |
| microcode : 0xba | |
| cpu MHz : 2400.000 | |
| cache size : 4096 KB | |
| physical id : 0 | |
| siblings : 4 | |
| core id : 2 | |
| cpu cores : 4 | |
| apicid : 2 | |
| initial apicid : 2 | |
| fpu : yes | |
| fpu_exception : yes | |
| cpuid level : 10 | |
| wp : yes | |
| flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dts tpr_shadow vnmi flexpriority | |
| bogomips : 4788.05 | |
| clflush size : 64 | |
| cache_alignment : 64 | |
| address sizes : 36 bits physical, 48 bits virtual | |
| power management: | |
| processor : 2 | |
| vendor_id : GenuineIntel | |
| cpu family : 6 | |
| model : 15 | |
| model name : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz | |
| stepping : 11 | |
| microcode : 0xba | |
| cpu MHz : 2400.000 | |
| cache size : 4096 KB | |
| physical id : 0 | |
| siblings : 4 | |
| core id : 3 | |
| cpu cores : 4 | |
| apicid : 3 | |
| initial apicid : 3 | |
| fpu : yes | |
| fpu_exception : yes | |
| cpuid level : 10 | |
| wp : yes | |
| flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dts tpr_shadow vnmi flexpriority | |
| bogomips : 4788.19 | |
| clflush size : 64 | |
| cache_alignment : 64 | |
| address sizes : 36 bits physical, 48 bits virtual | |
| power management: | |
| processor : 3 | |
| vendor_id : GenuineIntel | |
| cpu family : 6 | |
| model : 15 | |
| model name : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz | |
| stepping : 11 | |
| microcode : 0xba | |
| cpu MHz : 2400.000 | |
| cache size : 4096 KB | |
| physical id : 0 | |
| siblings : 4 | |
| core id : 1 | |
| cpu cores : 4 | |
| apicid : 1 | |
| initial apicid : 1 | |
| fpu : yes | |
| fpu_exception : yes | |
| cpuid level : 10 | |
| wp : yes | |
| flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dts tpr_shadow vnmi flexpriority | |
| bogomips : 4788.04 | |
| clflush size : 64 | |
| cache_alignment : 64 | |
| address sizes : 36 bits physical, 48 bits virtual | |
| power management: | |
| [ 0.000000] Initializing cgroup subsys cpuset | |
| [ 0.000000] Initializing cgroup subsys cpu | |
| [ 0.000000] Linux version 3.2.1-gentoo-r2 (root@lenin) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.1, pie-0.4.7) ) #6 SMP Wed Apr 18 11:00:55 JST 2012 | |
| [ 0.000000] Command line: ip=dhcp root=/dev/nfs nfsroot=133.11.27.157:/export/data00/cccproot BOOT_IMAGE=kernel-cccp | |
| [ 0.000000] BIOS-provided physical RAM map: | |
| [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) | |
| [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) | |
| [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) | |
| [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf590000 (usable) | |
| [ 0.000000] BIOS-e820: 00000000bf590000 - 00000000bf5e3000 (ACPI NVS) | |
| [ 0.000000] BIOS-e820: 00000000bf5e3000 - 00000000bf5f0000 (ACPI data) | |
| [ 0.000000] BIOS-e820: 00000000bf5f0000 - 00000000bf600000 (reserved) | |
| [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) | |
| [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) | |
| [ 0.000000] NX (Execute Disable) protection: active | |
| [ 0.000000] DMI 2.5 present. | |
| [ 0.000000] DMI: Dell Inc. Vostro 400/0GN723, BIOS 1.0.15 06/23/2008 | |
| [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) | |
| [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) | |
| [ 0.000000] No AGP bridge found | |
| [ 0.000000] last_pfn = 0xbf590 max_arch_pfn = 0x400000000 | |
| [ 0.000000] MTRR default type: uncachable | |
| [ 0.000000] MTRR fixed ranges enabled: | |
| [ 0.000000] 00000-9FFFF write-back | |
| [ 0.000000] A0000-BFFFF uncachable | |
| [ 0.000000] C0000-CAFFF write-protect | |
| [ 0.000000] CB000-EFFFF uncachable | |
| [ 0.000000] F0000-FFFFF write-through | |
| [ 0.000000] MTRR variable ranges enabled: | |
| [ 0.000000] 0 base 000000000 mask F80000000 write-back | |
| [ 0.000000] 1 base 080000000 mask FC0000000 write-back | |
| [ 0.000000] 2 base 0BF700000 mask FFFF00000 uncachable | |
| [ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable | |
| [ 0.000000] 4 base 0BF600000 mask FFFF00000 uncachable | |
| [ 0.000000] 5 disabled | |
| [ 0.000000] 6 disabled | |
| [ 0.000000] 7 disabled | |
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 | |
| [ 0.000000] found SMP MP-table at [ffff8800000f3f00] f3f00 | |
| [ 0.000000] initial memory mapped : 0 - 20000000 | |
| [ 0.000000] Base memory trampoline at [ffff88000009c000] 9c000 size 8192 | |
| [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf590000 | |
| [ 0.000000] 0000000000 - 00bf400000 page 2M | |
| [ 0.000000] 00bf400000 - 00bf590000 page 4k | |
| [ 0.000000] kernel direct mapping tables up to bf590000 @ 1fffb000-20000000 | |
| [ 0.000000] ACPI: RSDP 00000000000f97a0 00024 (v02 DELL ) | |
| [ 0.000000] ACPI: XSDT 00000000bf5e3080 0005C (v01 DELL FX09 42302E31 AWRD 00000000) | |
| [ 0.000000] ACPI: FACP 00000000bf5e7200 000F4 (v03 DELL FX09 42302E31 AWRD 00000000) | |
| [ 0.000000] ACPI: DSDT 00000000bf5e3200 03FFC (v01 DELL AWRDACPI 00001000 MSFT 03000000) | |
| [ 0.000000] ACPI: FACS 00000000bf590000 00040 | |
| [ 0.000000] ACPI: HPET 00000000bf5e73c0 00038 (v01 DELL FX09 42302E31 AWRD 00000098) | |
| [ 0.000000] ACPI: MCFG 00000000bf5e7400 0003C (v01 DELL FX09 42302E31 AWRD 00000000) | |
| [ 0.000000] ACPI: SLIC 00000000bf5e7440 00176 (v01 DELL FX09 42302E31 AWRD 00000000) | |
| [ 0.000000] ACPI: DMY2 00000000bf5e75c0 00080 (v01 DELL FX09 42302E31 AWRD 00000000) | |
| [ 0.000000] ACPI: APIC 00000000bf5e7300 00084 (v01 DELL FX09 42302E31 AWRD 00000000) | |
| [ 0.000000] ACPI: SSDT 00000000bf5e7f60 00380 (v01 PmRef CpuPm 00003000 INTL 20041203) | |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 | |
| [ 0.000000] No NUMA configuration found | |
| [ 0.000000] Faking a node at 0000000000000000-00000000bf590000 | |
| [ 0.000000] Initmem setup node 0 0000000000000000-00000000bf590000 | |
| [ 0.000000] NODE_DATA [00000000bf58b000 - 00000000bf58ffff] | |
| [ 0.000000] [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bbc00000-ffff8800bebfffff] on node 0 | |
| [ 0.000000] Zone PFN ranges: | |
| [ 0.000000] DMA 0x00000010 -> 0x00001000 | |
| [ 0.000000] DMA32 0x00001000 -> 0x00100000 | |
| [ 0.000000] Normal empty | |
| [ 0.000000] Movable zone start PFN for each node | |
| [ 0.000000] early_node_map[2] active PFN ranges | |
| [ 0.000000] 0: 0x00000010 -> 0x0000009e | |
| [ 0.000000] 0: 0x00000100 -> 0x000bf590 | |
| [ 0.000000] On node 0 totalpages: 783646 | |
| [ 0.000000] DMA zone: 64 pages used for memmap | |
| [ 0.000000] DMA zone: 2 pages reserved | |
| [ 0.000000] DMA zone: 3916 pages, LIFO batch:0 | |
| [ 0.000000] DMA32 zone: 12183 pages used for memmap | |
| [ 0.000000] DMA32 zone: 767481 pages, LIFO batch:31 | |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x408 | |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 | |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) | |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) | |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled) | |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) | |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) | |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) | |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) | |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) | |
| [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) | |
| [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 | |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) | |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) | |
| [ 0.000000] ACPI: IRQ0 used by override. | |
| [ 0.000000] ACPI: IRQ2 used by override. | |
| [ 0.000000] ACPI: IRQ9 used by override. | |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information | |
| [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 | |
| [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs | |
| [ 0.000000] nr_irqs_gsi: 40 | |
| [ 0.000000] Allocating PCI resources starting at bf600000 (gap: bf600000:20a00000) | |
| [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 | |
| [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff8800bf200000 s76288 r8192 d22016 u524288 | |
| [ 0.000000] pcpu-alloc: s76288 r8192 d22016 u524288 alloc=1*2097152 | |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 | |
| [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 771397 | |
| [ 0.000000] Policy zone: DMA32 | |
| [ 0.000000] Kernel command line: ip=dhcp root=/dev/nfs nfsroot=133.11.27.157:/export/data00/cccproot BOOT_IMAGE=kernel-cccp | |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) | |
| [ 0.000000] Checking aperture... | |
| [ 0.000000] No AGP bridge found | |
| [ 0.000000] Memory: 3072908k/3135040k available (7140k kernel code, 456k absent, 61676k reserved, 3318k data, 620k init) | |
| [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
| [ 0.000000] Hierarchical RCU implementation. | |
| [ 0.000000] NR_IRQS:4352 nr_irqs:712 16 | |
| [ 0.000000] Console: colour VGA+ 80x25 | |
| [ 0.000000] console [tty0] enabled | |
| [ 0.000000] hpet clockevent registered | |
| [ 0.000000] Fast TSC calibration using PIT | |
| [ 0.000000] Detected 2394.028 MHz processor. | |
| [ 0.010003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.05 BogoMIPS (lpj=23940280) | |
| [ 0.010125] pid_max: default: 32768 minimum: 301 | |
| [ 0.010204] Security Framework initialized | |
| [ 0.010565] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) | |
| [ 0.014672] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) | |
| [ 0.016722] Mount-cache hash table entries: 256 | |
| [ 0.016973] Initializing cgroup subsys cpuacct | |
| [ 0.017039] Initializing cgroup subsys freezer | |
| [ 0.017124] CPU: Physical Processor ID: 0 | |
| [ 0.017183] CPU: Processor Core ID: 0 | |
| [ 0.017241] mce: CPU supports 6 MCE banks | |
| [ 0.017304] CPU0: Thermal monitoring enabled (TM2) | |
| [ 0.017367] using mwait in idle threads. | |
| [ 0.017472] ACPI: Core revision 20110623 | |
| [ 0.020421] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 | |
| [ 0.122361] CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b | |
| [ 0.130000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. | |
| [ 0.130000] PEBS disabled due to CPU errata. | |
| [ 0.130000] ... version: 2 | |
| [ 0.130000] ... bit width: 40 | |
| [ 0.130000] ... generic registers: 2 | |
| [ 0.130000] ... value mask: 000000ffffffffff | |
| [ 0.130000] ... max period: 000000007fffffff | |
| [ 0.130000] ... fixed-purpose events: 3 | |
| [ 0.130000] ... event mask: 0000000700000003 | |
| [ 0.130000] Booting Node 0, Processors #1 | |
| [ 0.130000] smpboot cpu 1: start_ip = 9c000 | |
| [ 0.300081] #2 | |
| [ 0.300104] smpboot cpu 2: start_ip = 9c000 | |
| [ 0.470077] #3 Ok. | |
| [ 0.470130] smpboot cpu 3: start_ip = 9c000 | |
| [ 0.640012] Brought up 4 CPUs | |
| [ 0.640073] Total of 4 processors activated (19152.35 BogoMIPS). | |
| [ 0.643265] NET: Registered protocol family 16 | |
| [ 0.643265] ACPI: bus type pci registered | |
| [ 0.643265] dca service started, version 1.12.1 | |
| [ 0.643265] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) | |
| [ 0.643265] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 | |
| [ 0.677375] PCI: Using configuration type 1 for base access | |
| [ 0.680073] bio: create slab <bio-0> at 0 | |
| [ 0.680153] ACPI: Added _OSI(Module Device) | |
| [ 0.680153] ACPI: Added _OSI(Processor Device) | |
| [ 0.680153] ACPI: Added _OSI(3.0 _SCP Extensions) | |
| [ 0.680200] ACPI: Added _OSI(Processor Aggregator Device) | |
| [ 0.680946] ACPI: EC: Look up EC in DSDT | |
| [ 0.692436] ACPI: SSDT 00000000bf5e7680 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20041203) | |
| [ 0.692726] ACPI: Dynamic OEM Table Load: | |
| [ 0.692820] ACPI: SSDT (null) 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20041203) | |
| [ 0.693049] ACPI: SSDT 00000000bf5e7b40 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20041203) | |
| [ 0.693331] ACPI: Dynamic OEM Table Load: | |
| [ 0.693425] ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20041203) | |
| [ 0.693652] ACPI: SSDT 00000000bf5e7ca0 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20041203) | |
| [ 0.693938] ACPI: Dynamic OEM Table Load: | |
| [ 0.694033] ACPI: SSDT (null) 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20041203) | |
| [ 0.694258] ACPI: SSDT 00000000bf5e7e00 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20041203) | |
| [ 0.694540] ACPI: Dynamic OEM Table Load: | |
| [ 0.694636] ACPI: SSDT (null) 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20041203) | |
| [ 0.694861] ACPI: Interpreter enabled | |
| [ 0.694917] ACPI: (supports S0 S5) | |
| [ 0.695014] ACPI: Using IOAPIC for interrupt routing | |
| [ 0.700122] ACPI: No dock devices found. | |
| [ 0.700141] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug | |
| [ 0.700279] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) | |
| [ 0.700406] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] | |
| [ 0.700406] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] | |
| [ 0.700406] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] | |
| [ 0.700406] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] | |
| [ 0.700406] pci_root PNP0A08:00: host bridge window [mem 0xbf600000-0xfebfffff] | |
| [ 0.700500] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600 | |
| [ 0.700538] pci 0000:00:01.0: [8086:29c1] type 1 class 0x000604 | |
| [ 0.700565] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold | |
| [ 0.700568] pci 0000:00:01.0: PME# disabled | |
| [ 0.700581] pci 0000:00:02.0: [8086:29c2] type 0 class 0x000300 | |
| [ 0.700589] pci 0000:00:02.0: reg 10: [mem 0xfdf00000-0xfdf7ffff] | |
| [ 0.700594] pci 0000:00:02.0: reg 14: [io 0xff00-0xff07] | |
| [ 0.700599] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref] | |
| [ 0.700604] pci 0000:00:02.0: reg 1c: [mem 0xfdb00000-0xfdbfffff] | |
| [ 0.700655] pci 0000:00:19.0: [8086:10c0] type 0 class 0x000200 | |
| [ 0.700670] pci 0000:00:19.0: reg 10: [mem 0xfdfc0000-0xfdfdffff] | |
| [ 0.700678] pci 0000:00:19.0: reg 14: [mem 0xfdfff000-0xfdffffff] | |
| [ 0.700686] pci 0000:00:19.0: reg 18: [io 0xfe00-0xfe1f] | |
| [ 0.700728] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold | |
| [ 0.700732] pci 0000:00:19.0: PME# disabled | |
| [ 0.700748] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03 | |
| [ 0.700786] pci 0000:00:1a.0: reg 20: [io 0xfd00-0xfd1f] | |
| [ 0.700824] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03 | |
| [ 0.700861] pci 0000:00:1a.1: reg 20: [io 0xfc00-0xfc1f] | |
| [ 0.700900] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03 | |
| [ 0.700937] pci 0000:00:1a.2: reg 20: [io 0xfb00-0xfb1f] | |
| [ 0.700983] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03 | |
| [ 0.701002] pci 0000:00:1a.7: reg 10: [mem 0xfdffe000-0xfdffe3ff] | |
| [ 0.701066] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold | |
| [ 0.701070] pci 0000:00:1a.7: PME# disabled | |
| [ 0.701092] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403 | |
| [ 0.701105] pci 0000:00:1b.0: reg 10: [mem 0xfdff4000-0xfdff7fff 64bit] | |
| [ 0.701152] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold | |
| [ 0.701155] pci 0000:00:1b.0: PME# disabled | |
| [ 0.701175] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03 | |
| [ 0.701212] pci 0000:00:1d.0: reg 20: [io 0xfa00-0xfa1f] | |
| [ 0.701252] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03 | |
| [ 0.701289] pci 0000:00:1d.1: reg 20: [io 0xf900-0xf91f] | |
| [ 0.701327] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03 | |
| [ 0.701365] pci 0000:00:1d.2: reg 20: [io 0xf800-0xf81f] | |
| [ 0.701411] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03 | |
| [ 0.701430] pci 0000:00:1d.7: reg 10: [mem 0xfdffd000-0xfdffd3ff] | |
| [ 0.701494] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold | |
| [ 0.701498] pci 0000:00:1d.7: PME# disabled | |
| [ 0.701515] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 | |
| [ 0.701564] pci 0000:00:1f.0: [8086:2916] type 0 class 0x000601 | |
| [ 0.701637] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f) | |
| [ 0.701733] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 003f) | |
| [ 0.701859] pci 0000:00:1f.2: [8086:2920] type 0 class 0x000101 | |
| [ 0.701872] pci 0000:00:1f.2: reg 10: [io 0xf700-0xf707] | |
| [ 0.701879] pci 0000:00:1f.2: reg 14: [io 0xf600-0xf603] | |
| [ 0.701886] pci 0000:00:1f.2: reg 18: [io 0xf500-0xf507] | |
| [ 0.701893] pci 0000:00:1f.2: reg 1c: [io 0xf400-0xf403] | |
| [ 0.701900] pci 0000:00:1f.2: reg 20: [io 0xf300-0xf30f] | |
| [ 0.701907] pci 0000:00:1f.2: reg 24: [io 0xf200-0xf20f] | |
| [ 0.701939] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05 | |
| [ 0.701952] pci 0000:00:1f.3: reg 10: [mem 0xfdffc000-0xfdffc0ff 64bit] | |
| [ 0.701971] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f] | |
| [ 0.702000] pci 0000:00:1f.5: [8086:2926] type 0 class 0x000101 | |
| [ 0.702013] pci 0000:00:1f.5: reg 10: [io 0xf000-0xf007] | |
| [ 0.702020] pci 0000:00:1f.5: reg 14: [io 0xef00-0xef03] | |
| [ 0.702027] pci 0000:00:1f.5: reg 18: [io 0xee00-0xee07] | |
| [ 0.702034] pci 0000:00:1f.5: reg 1c: [io 0xed00-0xed03] | |
| [ 0.702041] pci 0000:00:1f.5: reg 20: [io 0xec00-0xec0f] | |
| [ 0.702048] pci 0000:00:1f.5: reg 24: [io 0xeb00-0xeb0f] | |
| [ 0.702098] pci 0000:00:01.0: PCI bridge to [bus 01-01] | |
| [ 0.702160] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] | |
| [ 0.702163] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdefffff] | |
| [ 0.702167] pci 0000:00:01.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref] | |
| [ 0.702220] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode) | |
| [ 0.702847] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] | |
| [ 0.702851] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff] | |
| [ 0.702856] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref] | |
| [ 0.702858] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) | |
| [ 0.702860] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) | |
| [ 0.702862] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) | |
| [ 0.702865] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) | |
| [ 0.702867] pci 0000:00:1e.0: bridge window [mem 0xbf600000-0xfebfffff] (subtractive decode) | |
| [ 0.702876] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] | |
| [ 0.702963] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] | |
| [ 0.703022] pci0000:00: Requesting ACPI _OSC control (0x1d) | |
| [ 0.703086] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d | |
| [ 0.703184] ACPI _OSC control for PCIe not granted, disabling ASPM | |
| [ 0.710596] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15) | |
| [ 0.710596] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. | |
| [ 0.710745] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15) | |
| [ 0.711059] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) | |
| [ 0.711373] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15) | |
| [ 0.711687] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12 14 15) | |
| [ 0.712001] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 7 9 10 11 12 14 15) | |
| [ 0.712316] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 *4 5 7 9 10 11 12 14 15) | |
| [ 0.712653] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none | |
| [ 0.712653] vgaarb: loaded | |
| [ 0.712653] vgaarb: bridge control possible 0000:00:02.0 | |
| [ 0.712653] SCSI subsystem initialized | |
| [ 0.712653] libata version 3.00 loaded. | |
| [ 0.712653] usbcore: registered new interface driver usbfs | |
| [ 0.712653] usbcore: registered new interface driver hub | |
| [ 0.712653] usbcore: registered new device driver usb | |
| [ 0.712653] Advanced Linux Sound Architecture Driver Version 1.0.24. | |
| [ 0.712653] PCI: Using ACPI for IRQ routing | |
| [ 0.721758] PCI: pci_cache_line_size set to 64 bytes | |
| [ 0.721813] reserve RAM buffer: 000000000009e800 - 000000000009ffff | |
| [ 0.721815] reserve RAM buffer: 00000000bf590000 - 00000000bfffffff | |
| [ 0.721863] NetLabel: Initializing | |
| [ 0.721863] NetLabel: domain hash size = 128 | |
| [ 0.721863] NetLabel: protocols = UNLABELED CIPSOv4 | |
| [ 0.721863] NetLabel: unlabeled traffic allowed by default | |
| [ 0.721863] HPET: 4 timers in total, 0 timers will be used for per-cpu timer | |
| [ 0.721863] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 | |
| [ 0.721863] hpet0: 4 comparators, 64-bit 14.318180 MHz counter | |
| [ 0.750076] Switching to clocksource hpet | |
| [ 0.758165] pnp: PnP ACPI init | |
| [ 0.758253] ACPI: bus type pnp registered | |
| [ 0.758403] pnp 00:00: [bus 00-ff] | |
| [ 0.758405] pnp 00:00: [io 0x0cf8-0x0cff] | |
| [ 0.758407] pnp 00:00: [io 0x0000-0x0cf7 window] | |
| [ 0.758409] pnp 00:00: [io 0x0d00-0xffff window] | |
| [ 0.758412] pnp 00:00: [mem 0x000a0000-0x000bffff window] | |
| [ 0.758414] pnp 00:00: [mem 0x000c0000-0x000dffff window] | |
| [ 0.758415] pnp 00:00: [mem 0xbf600000-0xfebfffff window] | |
| [ 0.758535] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) | |
| [ 0.758611] pnp 00:01: [io 0x0010-0x001f] | |
| [ 0.758613] pnp 00:01: [io 0x0022-0x003f] | |
| [ 0.758616] pnp 00:01: [io 0x0044-0x005f] | |
| [ 0.758618] pnp 00:01: [io 0x0060] | |
| [ 0.758620] pnp 00:01: [io 0x0064] | |
| [ 0.758622] pnp 00:01: [io 0x0062-0x0063] | |
| [ 0.758625] pnp 00:01: [io 0x0065-0x006f] | |
| [ 0.758627] pnp 00:01: [io 0x0074-0x007f] | |
| [ 0.758629] pnp 00:01: [io 0x0091-0x0093] | |
| [ 0.758632] pnp 00:01: [io 0x00a2-0x00bf] | |
| [ 0.758634] pnp 00:01: [io 0x00e0-0x00ef] | |
| [ 0.758636] pnp 00:01: [io 0x04d0-0x04d1] | |
| [ 0.758638] pnp 00:01: [io 0x0800-0x087f] | |
| [ 0.758641] pnp 00:01: [io 0x0290-0x0297] | |
| [ 0.758643] pnp 00:01: [io 0x0880-0x088f] | |
| [ 0.758772] system 00:01: [io 0x04d0-0x04d1] has been reserved | |
| [ 0.758841] system 00:01: [io 0x0800-0x087f] has been reserved | |
| [ 0.758922] system 00:01: [io 0x0290-0x0297] has been reserved | |
| [ 0.758985] system 00:01: [io 0x0880-0x088f] has been reserved | |
| [ 0.759048] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| [ 0.759059] pnp 00:02: [dma 4] | |
| [ 0.759060] pnp 00:02: [io 0x0000-0x000f] | |
| [ 0.759062] pnp 00:02: [io 0x0080-0x0090] | |
| [ 0.759063] pnp 00:02: [io 0x0094-0x009f] | |
| [ 0.759065] pnp 00:02: [io 0x00c0-0x00df] | |
| [ 0.759142] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) | |
| [ 0.759205] pnp 00:03: [irq 0 disabled] | |
| [ 0.759218] pnp 00:03: [irq 8] | |
| [ 0.759221] pnp 00:03: [mem 0xfed00000-0xfed003ff] | |
| [ 0.759302] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) | |
| [ 0.759334] pnp 00:04: [io 0x0070-0x0073] | |
| [ 0.759409] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) | |
| [ 0.759420] pnp 00:05: [io 0x0061] | |
| [ 0.759500] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) | |
| [ 0.759512] pnp 00:06: [io 0x00f0-0x00ff] | |
| [ 0.759525] pnp 00:06: [irq 13] | |
| [ 0.759603] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) | |
| [ 0.759768] pnp 00:07: [io 0x03f0-0x03f5] | |
| [ 0.759771] pnp 00:07: [io 0x03f7] | |
| [ 0.759777] pnp 00:07: [irq 6] | |
| [ 0.759780] pnp 00:07: [dma 2] | |
| [ 0.759876] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) | |
| [ 0.759941] pnp 00:08: [io 0x0400-0x04bf] | |
| [ 0.760056] system 00:08: [io 0x0400-0x04bf] has been reserved | |
| [ 0.760135] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| [ 0.760150] pnp 00:09: [mem 0xffb80000-0xffbfffff] | |
| [ 0.760246] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active) | |
| [ 0.760409] pnp 00:0a: [mem 0xe0000000-0xefffffff] | |
| [ 0.760515] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved | |
| [ 0.760585] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| [ 0.760658] pnp 00:0b: [mem 0x000f0000-0x000fffff] | |
| [ 0.760661] pnp 00:0b: [mem 0xbf600000-0xbf6fffff] | |
| [ 0.760664] pnp 00:0b: [mem 0xfed00000-0xfed000ff] | |
| [ 0.760667] pnp 00:0b: [mem 0xbf590000-0xbf5fffff] | |
| [ 0.760669] pnp 00:0b: [mem 0x00000000-0x0009ffff] | |
| [ 0.760672] pnp 00:0b: [mem 0x00100000-0xbf58ffff] | |
| [ 0.760674] pnp 00:0b: [mem 0xfec00000-0xfec00fff] | |
| [ 0.760676] pnp 00:0b: [mem 0xfed14000-0xfed1dfff] | |
| [ 0.760679] pnp 00:0b: [mem 0xfed20000-0xfed9ffff] | |
| [ 0.760681] pnp 00:0b: [mem 0xfee00000-0xfee00fff] | |
| [ 0.760683] pnp 00:0b: [mem 0xffb00000-0xffb7ffff] | |
| [ 0.760686] pnp 00:0b: [mem 0xfff00000-0xffffffff] | |
| [ 0.760688] pnp 00:0b: [mem 0x000e0000-0x000effff] | |
| [ 0.760809] system 00:0b: [mem 0x000f0000-0x000fffff] could not be reserved | |
| [ 0.760883] system 00:0b: [mem 0xbf600000-0xbf6fffff] has been reserved | |
| [ 0.760946] system 00:0b: [mem 0xfed00000-0xfed000ff] has been reserved | |
| [ 0.761009] system 00:0b: [mem 0xbf590000-0xbf5fffff] could not be reserved | |
| [ 0.761073] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved | |
| [ 0.761137] system 00:0b: [mem 0x00100000-0xbf58ffff] could not be reserved | |
| [ 0.761201] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved | |
| [ 0.761264] system 00:0b: [mem 0xfed14000-0xfed1dfff] has been reserved | |
| [ 0.761328] system 00:0b: [mem 0xfed20000-0xfed9ffff] has been reserved | |
| [ 0.761391] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved | |
| [ 0.761454] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved | |
| [ 0.761517] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved | |
| [ 0.761581] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved | |
| [ 0.761644] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) | |
| [ 0.761652] pnp: PnP ACPI: found 12 devices | |
| [ 0.761709] ACPI: ACPI bus type pnp unregistered | |
| [ 0.766421] PCI: max bus depth: 1 pci_try_num: 2 | |
| [ 0.766437] pci 0000:00:01.0: PCI bridge to [bus 01-01] | |
| [ 0.766498] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] | |
| [ 0.766561] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdefffff] | |
| [ 0.766625] pci 0000:00:01.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref] | |
| [ 0.766722] pci 0000:00:1e.0: PCI bridge to [bus 02-02] | |
| [ 0.766782] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] | |
| [ 0.766846] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff] | |
| [ 0.766910] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref] | |
| [ 0.767019] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 | |
| [ 0.767084] pci 0000:00:01.0: setting latency timer to 64 | |
| [ 0.767090] pci 0000:00:1e.0: setting latency timer to 64 | |
| [ 0.767093] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] | |
| [ 0.767095] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] | |
| [ 0.767097] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] | |
| [ 0.767099] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] | |
| [ 0.767101] pci_bus 0000:00: resource 8 [mem 0xbf600000-0xfebfffff] | |
| [ 0.767103] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] | |
| [ 0.767105] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff] | |
| [ 0.767107] pci_bus 0000:01: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref] | |
| [ 0.767110] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] | |
| [ 0.767112] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff] | |
| [ 0.767114] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref] | |
| [ 0.767116] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] | |
| [ 0.767118] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] | |
| [ 0.767120] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] | |
| [ 0.767121] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff] | |
| [ 0.767123] pci_bus 0000:02: resource 8 [mem 0xbf600000-0xfebfffff] | |
| [ 0.767155] NET: Registered protocol family 2 | |
| [ 0.767326] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) | |
| [ 0.768424] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) | |
| [ 0.775173] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) | |
| [ 0.776210] TCP: Hash tables configured (established 524288 bind 65536) | |
| [ 0.776275] TCP reno registered | |
| [ 0.776341] UDP hash table entries: 2048 (order: 4, 65536 bytes) | |
| [ 0.776467] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) | |
| [ 0.776703] NET: Registered protocol family 1 | |
| [ 0.776890] RPC: Registered named UNIX socket transport module. | |
| [ 0.776953] RPC: Registered udp transport module. | |
| [ 0.777013] RPC: Registered tcp transport module. | |
| [ 0.777072] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 0.777151] pci 0000:00:02.0: Boot video device | |
| [ 0.777159] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f10 | |
| [ 0.777161] pci 0000:00:1a.0: Performing full reset | |
| [ 0.777177] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0010 | |
| [ 0.777179] pci 0000:00:1a.1: Performing full reset | |
| [ 0.777193] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0010 | |
| [ 0.777195] pci 0000:00:1a.2: Performing full reset | |
| [ 0.777232] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x003b | |
| [ 0.777234] pci 0000:00:1d.0: Performing full reset | |
| [ 0.777249] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 | |
| [ 0.777250] pci 0000:00:1d.1: Performing full reset | |
| [ 0.777266] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 | |
| [ 0.777268] pci 0000:00:1d.2: Performing full reset | |
| [ 0.777299] PCI: CLS 64 bytes, default 64 | |
| [ 0.777679] kvm: already loaded the other module | |
| [ 0.779978] Intel AES-NI instructions are not detected. | |
| [ 0.780356] audit: initializing netlink socket (disabled) | |
| [ 0.780432] type=2000 audit(1354955275.780:1): initialized | |
| [ 0.808161] HugeTLB registered 2 MB page size, pre-allocated 0 pages | |
| [ 0.835152] VFS: Disk quotas dquot_6.5.2 | |
| [ 0.835322] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| [ 0.836769] fuse init (API version 7.17) | |
| [ 0.837060] msgmni has been set to 6001 | |
| [ 0.837648] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) | |
| [ 0.837753] io scheduler noop registered | |
| [ 0.837810] io scheduler deadline registered | |
| [ 0.837950] io scheduler cfq registered (default) | |
| [ 0.838144] pcieport 0000:00:01.0: setting latency timer to 64 | |
| [ 0.838181] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X | |
| [ 0.838598] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled | |
| [ 0.839560] Non-volatile memory driver v1.3 | |
| [ 0.839699] Linux agpgart interface v0.103 | |
| [ 0.839937] agpgart-intel 0000:00:00.0: Intel G33 Chipset | |
| [ 0.840123] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable | |
| [ 0.841102] agpgart-intel 0000:00:00.0: detected 8192K stolen memory | |
| [ 0.841388] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 | |
| [ 0.842116] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 | |
| [ 0.842229] ACPI: Power Button [PWRB] | |
| [ 0.842386] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 | |
| [ 0.842492] ACPI: Power Button [PWRF] | |
| [ 0.842706] ACPI: Fan [FAN] (on) | |
| [ 0.844400] thermal LNXTHERM:00: registered as thermal_zone0 | |
| [ 0.844467] ACPI: Thermal Zone [THRM] (40 C) | |
| [ 0.844589] ioatdma: Intel(R) QuickData Technology Driver 4.00 | |
| [ 0.844917] [drm] Initialized drm 1.1.0 20060810 | |
| [ 0.845009] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 | |
| [ 0.845080] i915 0000:00:02.0: setting latency timer to 64 | |
| [ 0.883689] i915 0000:00:02.0: irq 41 for MSI/MSI-X | |
| [ 0.883695] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). | |
| [ 0.883762] [drm] Driver supports precise vblank timestamp query. | |
| [ 0.883855] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem | |
| [ 0.898432] [drm] initialized overlay support | |
| [ 0.910027] No connectors reported connected with modes | |
| [ 0.910092] [drm] Cannot find any crtc or sizes - going 1024x768 | |
| [ 0.913346] fbcon: inteldrmfb (fb0) is primary device | |
| [ 0.917557] Console: switching to colour frame buffer device 128x48 | |
| [ 0.919293] fb0: inteldrmfb frame buffer device | |
| [ 0.919313] drm: registered panic notifier | |
| [ 0.919340] No ACPI video bus found | |
| [ 0.919448] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 | |
| [ 0.920002] ata_piix 0000:00:1f.2: version 2.13 | |
| [ 0.920031] ata_piix 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 | |
| [ 0.920088] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] | |
| [ 0.920180] ata_piix 0000:00:1f.2: setting latency timer to 64 | |
| [ 0.920799] scsi0 : ata_piix | |
| [ 0.921003] scsi1 : ata_piix | |
| [ 0.921462] ata1: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf300 irq 19 | |
| [ 0.921495] ata2: SATA max UDMA/133 cmd 0xf500 ctl 0xf400 bmdma 0xf308 irq 19 | |
| [ 0.921544] ata_piix 0000:00:1f.5: PCI INT A -> GSI 19 (level, low) -> IRQ 19 | |
| [ 0.921579] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] | |
| [ 0.921649] ata_piix 0000:00:1f.5: setting latency timer to 64 | |
| [ 0.922169] scsi2 : ata_piix | |
| [ 0.922355] scsi3 : ata_piix | |
| [ 0.922644] ata3: SATA max UDMA/133 cmd 0xf000 ctl 0xef00 bmdma 0xec00 irq 19 | |
| [ 0.922677] ata4: SATA max UDMA/133 cmd 0xee00 ctl 0xed00 bmdma 0xec08 irq 19 | |
| [ 0.922891] Atheros(R) L2 Ethernet Driver - version 2.2.3 | |
| [ 0.922930] Copyright (c) 2007 Atheros Corporation. | |
| [ 0.923975] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k | |
| [ 0.924915] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. | |
| [ 0.925799] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 | |
| [ 0.926657] e1000e 0000:00:19.0: setting latency timer to 64 | |
| [ 0.926738] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X | |
| [ 1.111972] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1d:09:89:57:0d | |
| [ 1.112910] e1000e 0000:00:19.0: eth0: Intel(R) PRO/10/100 Network Connection | |
| [ 1.113796] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 7, PBA No: FFFFFF-0FF | |
| [ 1.114731] Intel(R) Gigabit Ethernet Network Driver - version 3.2.10-k | |
| [ 1.115708] Copyright (c) 2007-2011 Intel Corporation. | |
| [ 1.116711] sky2: driver version 1.30 | |
| [ 1.117798] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| [ 1.118774] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 | |
| [ 1.118797] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 | |
| [ 1.119693] ehci_hcd 0000:00:1a.7: setting latency timer to 64 | |
| [ 1.119696] ehci_hcd 0000:00:1a.7: EHCI Host Controller | |
| [ 1.120597] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 | |
| [ 1.121478] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 | |
| [ 1.121482] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch | |
| [ 1.121501] ehci_hcd 0000:00:1a.7: debug port 1 | |
| [ 1.122362] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT | |
| [ 1.126237] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported | |
| [ 1.126239] ehci_hcd 0000:00:1a.7: supports USB remote wakeup | |
| [ 1.126253] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdffe000 | |
| [ 1.127115] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT | |
| [ 1.131004] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN | |
| [ 1.150037] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 | |
| [ 1.150962] usb usb1: default language 0x0409 | |
| [ 1.150967] usb usb1: udev 1, busnum 1, minor = 0 | |
| [ 1.150969] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| [ 1.151811] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 1.152659] usb usb1: Product: EHCI Host Controller | |
| [ 1.153508] usb usb1: Manufacturer: Linux 3.2.1-gentoo-r2 ehci_hcd | |
| [ 1.154352] usb usb1: SerialNumber: 0000:00:1a.7 | |
| [ 1.155289] usb usb1: usb_probe_device | |
| [ 1.155292] usb usb1: configuration #1 chosen from 1 choice | |
| [ 1.155301] usb usb1: adding 1-0:1.0 (config #1, interface 0) | |
| [ 1.155379] hub 1-0:1.0: usb_probe_interface | |
| [ 1.155382] hub 1-0:1.0: usb_probe_interface - got id | |
| [ 1.155385] hub 1-0:1.0: USB hub found | |
| [ 1.156293] hub 1-0:1.0: 6 ports detected | |
| [ 1.157118] hub 1-0:1.0: standalone hub | |
| [ 1.157119] hub 1-0:1.0: no power switching (usb 1.0) | |
| [ 1.157121] hub 1-0:1.0: individual port over-current protection | |
| [ 1.157123] hub 1-0:1.0: power on to power good time: 20ms | |
| [ 1.157127] hub 1-0:1.0: local power source is good | |
| [ 1.157129] hub 1-0:1.0: trying to enable port power on non-switchable hub | |
| [ 1.157180] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 | |
| [ 1.158026] ehci_hcd 0000:00:1d.7: setting latency timer to 64 | |
| [ 1.158029] ehci_hcd 0000:00:1d.7: EHCI Host Controller | |
| [ 1.158853] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 | |
| [ 1.159687] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 | |
| [ 1.159691] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch | |
| [ 1.159709] ehci_hcd 0000:00:1d.7: debug port 1 | |
| [ 1.160567] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT | |
| [ 1.164448] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported | |
| [ 1.164450] ehci_hcd 0000:00:1d.7: supports USB remote wakeup | |
| [ 1.164462] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffd000 | |
| [ 1.165278] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT | |
| [ 1.169137] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN | |
| [ 1.180024] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 | |
| [ 1.180907] usb usb2: default language 0x0409 | |
| [ 1.180912] usb usb2: udev 1, busnum 2, minor = 128 | |
| [ 1.180914] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 | |
| [ 1.181730] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 1.182542] usb usb2: Product: EHCI Host Controller | |
| [ 1.183364] usb usb2: Manufacturer: Linux 3.2.1-gentoo-r2 ehci_hcd | |
| [ 1.184182] usb usb2: SerialNumber: 0000:00:1d.7 | |
| [ 1.185116] usb usb2: usb_probe_device | |
| [ 1.185120] usb usb2: configuration #1 chosen from 1 choice | |
| [ 1.185130] usb usb2: adding 2-0:1.0 (config #1, interface 0) | |
| [ 1.185197] hub 2-0:1.0: usb_probe_interface | |
| [ 1.185200] hub 2-0:1.0: usb_probe_interface - got id | |
| [ 1.185202] hub 2-0:1.0: USB hub found | |
| [ 1.186099] hub 2-0:1.0: 6 ports detected | |
| [ 1.186909] hub 2-0:1.0: standalone hub | |
| [ 1.186911] hub 2-0:1.0: no power switching (usb 1.0) | |
| [ 1.186912] hub 2-0:1.0: individual port over-current protection | |
| [ 1.186914] hub 2-0:1.0: power on to power good time: 20ms | |
| [ 1.186917] hub 2-0:1.0: local power source is good | |
| [ 1.186919] hub 2-0:1.0: trying to enable port power on non-switchable hub | |
| [ 1.187021] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| [ 1.187947] ohci_hcd: block sizes: ed 80 td 96 | |
| [ 1.188013] uhci_hcd: USB Universal Host Controller Interface driver | |
| [ 1.188972] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 | |
| [ 1.189810] uhci_hcd 0000:00:1a.0: setting latency timer to 64 | |
| [ 1.189813] uhci_hcd 0000:00:1a.0: UHCI Host Controller | |
| [ 1.190682] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 | |
| [ 1.191522] uhci_hcd 0000:00:1a.0: detected 2 ports | |
| [ 1.192352] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 | |
| [ 1.192354] uhci_hcd 0000:00:1a.0: Performing full reset | |
| [ 1.192366] uhci_hcd 0000:00:1a.0: supports USB remote wakeup | |
| [ 1.192377] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fd00 | |
| [ 1.193231] usb usb3: default language 0x0409 | |
| [ 1.193235] usb usb3: udev 1, busnum 3, minor = 256 | |
| [ 1.193238] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 | |
| [ 1.194067] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 1.194907] usb usb3: Product: UHCI Host Controller | |
| [ 1.195723] usb usb3: Manufacturer: Linux 3.2.1-gentoo-r2 uhci_hcd | |
| [ 1.196547] usb usb3: SerialNumber: 0000:00:1a.0 | |
| [ 1.197468] usb usb3: usb_probe_device | |
| [ 1.197471] usb usb3: configuration #1 chosen from 1 choice | |
| [ 1.197480] usb usb3: adding 3-0:1.0 (config #1, interface 0) | |
| [ 1.197556] hub 3-0:1.0: usb_probe_interface | |
| [ 1.197559] hub 3-0:1.0: usb_probe_interface - got id | |
| [ 1.197562] hub 3-0:1.0: USB hub found | |
| [ 1.198450] hub 3-0:1.0: 2 ports detected | |
| [ 1.199252] hub 3-0:1.0: standalone hub | |
| [ 1.199253] hub 3-0:1.0: no power switching (usb 1.0) | |
| [ 1.199255] hub 3-0:1.0: individual port over-current protection | |
| [ 1.199257] hub 3-0:1.0: power on to power good time: 2ms | |
| [ 1.199260] hub 3-0:1.0: local power source is good | |
| [ 1.199262] hub 3-0:1.0: trying to enable port power on non-switchable hub | |
| [ 1.199308] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 | |
| [ 1.200167] uhci_hcd 0000:00:1a.1: setting latency timer to 64 | |
| [ 1.200170] uhci_hcd 0000:00:1a.1: UHCI Host Controller | |
| [ 1.200987] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 | |
| [ 1.201802] uhci_hcd 0000:00:1a.1: detected 2 ports | |
| [ 1.202603] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 | |
| [ 1.202605] uhci_hcd 0000:00:1a.1: Performing full reset | |
| [ 1.202618] uhci_hcd 0000:00:1a.1: supports USB remote wakeup | |
| [ 1.202629] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fc00 | |
| [ 1.203449] usb usb4: default language 0x0409 | |
| [ 1.203454] usb usb4: udev 1, busnum 4, minor = 384 | |
| [ 1.203456] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 | |
| [ 1.204257] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 1.205064] usb usb4: Product: UHCI Host Controller | |
| [ 1.205875] usb usb4: Manufacturer: Linux 3.2.1-gentoo-r2 uhci_hcd | |
| [ 1.206687] usb usb4: SerialNumber: 0000:00:1a.1 | |
| [ 1.207601] usb usb4: usb_probe_device | |
| [ 1.207604] usb usb4: configuration #1 chosen from 1 choice | |
| [ 1.207613] usb usb4: adding 4-0:1.0 (config #1, interface 0) | |
| [ 1.207686] hub 4-0:1.0: usb_probe_interface | |
| [ 1.207689] hub 4-0:1.0: usb_probe_interface - got id | |
| [ 1.207692] hub 4-0:1.0: USB hub found | |
| [ 1.208569] hub 4-0:1.0: 2 ports detected | |
| [ 1.209361] hub 4-0:1.0: standalone hub | |
| [ 1.209362] hub 4-0:1.0: no power switching (usb 1.0) | |
| [ 1.209364] hub 4-0:1.0: individual port over-current protection | |
| [ 1.209366] hub 4-0:1.0: power on to power good time: 2ms | |
| [ 1.209369] hub 4-0:1.0: local power source is good | |
| [ 1.209371] hub 4-0:1.0: trying to enable port power on non-switchable hub | |
| [ 1.209408] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 | |
| [ 1.210246] uhci_hcd 0000:00:1a.2: setting latency timer to 64 | |
| [ 1.210249] uhci_hcd 0000:00:1a.2: UHCI Host Controller | |
| [ 1.211059] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 | |
| [ 1.211884] uhci_hcd 0000:00:1a.2: detected 2 ports | |
| [ 1.212688] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 | |
| [ 1.212690] uhci_hcd 0000:00:1a.2: Performing full reset | |
| [ 1.212702] uhci_hcd 0000:00:1a.2: supports USB remote wakeup | |
| [ 1.212707] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fb00 | |
| [ 1.213530] usb usb5: default language 0x0409 | |
| [ 1.213535] usb usb5: udev 1, busnum 5, minor = 512 | |
| [ 1.213537] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 | |
| [ 1.214342] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 1.215148] usb usb5: Product: UHCI Host Controller | |
| [ 1.215956] usb usb5: Manufacturer: Linux 3.2.1-gentoo-r2 uhci_hcd | |
| [ 1.216775] usb usb5: SerialNumber: 0000:00:1a.2 | |
| [ 1.217692] usb usb5: usb_probe_device | |
| [ 1.217696] usb usb5: configuration #1 chosen from 1 choice | |
| [ 1.217706] usb usb5: adding 5-0:1.0 (config #1, interface 0) | |
| [ 1.217782] hub 5-0:1.0: usb_probe_interface | |
| [ 1.217785] hub 5-0:1.0: usb_probe_interface - got id | |
| [ 1.217787] hub 5-0:1.0: USB hub found | |
| [ 1.218676] hub 5-0:1.0: 2 ports detected | |
| [ 1.219473] hub 5-0:1.0: standalone hub | |
| [ 1.219474] hub 5-0:1.0: no power switching (usb 1.0) | |
| [ 1.219476] hub 5-0:1.0: individual port over-current protection | |
| [ 1.219477] hub 5-0:1.0: power on to power good time: 2ms | |
| [ 1.219481] hub 5-0:1.0: local power source is good | |
| [ 1.219482] hub 5-0:1.0: trying to enable port power on non-switchable hub | |
| [ 1.219521] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 | |
| [ 1.220359] uhci_hcd 0000:00:1d.0: setting latency timer to 64 | |
| [ 1.220361] uhci_hcd 0000:00:1d.0: UHCI Host Controller | |
| [ 1.221174] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 | |
| [ 1.221994] uhci_hcd 0000:00:1d.0: detected 2 ports | |
| [ 1.222811] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 | |
| [ 1.222813] uhci_hcd 0000:00:1d.0: Performing full reset | |
| [ 1.222825] uhci_hcd 0000:00:1d.0: supports USB remote wakeup | |
| [ 1.222829] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fa00 | |
| [ 1.223662] usb usb6: default language 0x0409 | |
| [ 1.223667] usb usb6: udev 1, busnum 6, minor = 640 | |
| [ 1.223669] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 | |
| [ 1.224482] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 1.225290] usb usb6: Product: UHCI Host Controller | |
| [ 1.226095] usb usb6: Manufacturer: Linux 3.2.1-gentoo-r2 uhci_hcd | |
| [ 1.226904] usb usb6: SerialNumber: 0000:00:1d.0 | |
| [ 1.227810] usb usb6: usb_probe_device | |
| [ 1.227813] usb usb6: configuration #1 chosen from 1 choice | |
| [ 1.227822] usb usb6: adding 6-0:1.0 (config #1, interface 0) | |
| [ 1.227892] hub 6-0:1.0: usb_probe_interface | |
| [ 1.227895] hub 6-0:1.0: usb_probe_interface - got id | |
| [ 1.227898] hub 6-0:1.0: USB hub found | |
| [ 1.228784] hub 6-0:1.0: 2 ports detected | |
| [ 1.229583] hub 6-0:1.0: standalone hub | |
| [ 1.229584] hub 6-0:1.0: no power switching (usb 1.0) | |
| [ 1.229586] hub 6-0:1.0: individual port over-current protection | |
| [ 1.229588] hub 6-0:1.0: power on to power good time: 2ms | |
| [ 1.229591] hub 6-0:1.0: local power source is good | |
| [ 1.229593] hub 6-0:1.0: trying to enable port power on non-switchable hub | |
| [ 1.229633] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 | |
| [ 1.230476] uhci_hcd 0000:00:1d.1: setting latency timer to 64 | |
| [ 1.230479] uhci_hcd 0000:00:1d.1: UHCI Host Controller | |
| [ 1.231298] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 | |
| [ 1.232117] uhci_hcd 0000:00:1d.1: detected 2 ports | |
| [ 1.232927] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 | |
| [ 1.232929] uhci_hcd 0000:00:1d.1: Performing full reset | |
| [ 1.232941] uhci_hcd 0000:00:1d.1: supports USB remote wakeup | |
| [ 1.232945] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f900 | |
| [ 1.233780] usb usb7: default language 0x0409 | |
| [ 1.233785] usb usb7: udev 1, busnum 7, minor = 768 | |
| [ 1.233787] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 | |
| [ 1.234612] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 1.235425] usb usb7: Product: UHCI Host Controller | |
| [ 1.236243] usb usb7: Manufacturer: Linux 3.2.1-gentoo-r2 uhci_hcd | |
| [ 1.237057] usb usb7: SerialNumber: 0000:00:1d.1 | |
| [ 1.237964] usb usb7: usb_probe_device | |
| [ 1.237967] usb usb7: configuration #1 chosen from 1 choice | |
| [ 1.237976] usb usb7: adding 7-0:1.0 (config #1, interface 0) | |
| [ 1.238049] hub 7-0:1.0: usb_probe_interface | |
| [ 1.238052] hub 7-0:1.0: usb_probe_interface - got id | |
| [ 1.238055] hub 7-0:1.0: USB hub found | |
| [ 1.238946] hub 7-0:1.0: 2 ports detected | |
| [ 1.239746] hub 7-0:1.0: standalone hub | |
| [ 1.239748] hub 7-0:1.0: no power switching (usb 1.0) | |
| [ 1.239749] hub 7-0:1.0: individual port over-current protection | |
| [ 1.239751] hub 7-0:1.0: power on to power good time: 2ms | |
| [ 1.239754] hub 7-0:1.0: local power source is good | |
| [ 1.239756] hub 7-0:1.0: trying to enable port power on non-switchable hub | |
| [ 1.239795] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 | |
| [ 1.240651] uhci_hcd 0000:00:1d.2: setting latency timer to 64 | |
| [ 1.240653] uhci_hcd 0000:00:1d.2: UHCI Host Controller | |
| [ 1.241470] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 | |
| [ 1.242288] uhci_hcd 0000:00:1d.2: detected 2 ports | |
| [ 1.243094] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 | |
| [ 1.243096] uhci_hcd 0000:00:1d.2: Performing full reset | |
| [ 1.243108] uhci_hcd 0000:00:1d.2: supports USB remote wakeup | |
| [ 1.243112] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f800 | |
| [ 1.243939] usb usb8: default language 0x0409 | |
| [ 1.243944] usb usb8: udev 1, busnum 8, minor = 896 | |
| [ 1.243946] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 | |
| [ 1.244777] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 1.245594] usb usb8: Product: UHCI Host Controller | |
| [ 1.246400] usb usb8: Manufacturer: Linux 3.2.1-gentoo-r2 uhci_hcd | |
| [ 1.247210] usb usb8: SerialNumber: 0000:00:1d.2 | |
| [ 1.248115] usb usb8: usb_probe_device | |
| [ 1.248119] usb usb8: configuration #1 chosen from 1 choice | |
| [ 1.248126] usb usb8: adding 8-0:1.0 (config #1, interface 0) | |
| [ 1.248199] hub 8-0:1.0: usb_probe_interface | |
| [ 1.248202] hub 8-0:1.0: usb_probe_interface - got id | |
| [ 1.248204] hub 8-0:1.0: USB hub found | |
| [ 1.249094] hub 8-0:1.0: 2 ports detected | |
| [ 1.249891] hub 8-0:1.0: standalone hub | |
| [ 1.249893] hub 8-0:1.0: no power switching (usb 1.0) | |
| [ 1.249894] hub 8-0:1.0: individual port over-current protection | |
| [ 1.249896] hub 8-0:1.0: power on to power good time: 2ms | |
| [ 1.249899] hub 8-0:1.0: local power source is good | |
| [ 1.249901] hub 8-0:1.0: trying to enable port power on non-switchable hub | |
| [ 1.249998] Initializing USB Mass Storage driver... | |
| [ 1.250972] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000 | |
| [ 1.250992] usbcore: registered new interface driver usb-storage | |
| [ 1.251814] USB Mass Storage support registered. | |
| [ 1.252717] usbcore: registered new interface driver libusual | |
| [ 1.253870] i8042: PNP: No PS/2 controller found. Probing ports directly. | |
| [ 1.280680] ata4: SATA link down (SStatus 0 SControl 300) | |
| [ 1.288736] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS? | |
| [ 1.289577] i8042: If AUX port is really absent please use the 'i8042.noaux' option | |
| [ 1.290572] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 | |
| [ 1.290579] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 | |
| [ 1.292240] ata3: SATA link down (SStatus 0 SControl 300) | |
| [ 1.300035] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 | |
| [ 1.310038] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 | |
| [ 1.320035] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 | |
| [ 1.330114] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 | |
| [ 1.340038] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 | |
| [ 1.540347] serio: i8042 KBD port at 0x60,0x64 irq 1 | |
| [ 1.541438] mousedev: PS/2 mouse device common for all mice | |
| [ 1.542724] input: PC Speaker as /devices/platform/pcspkr/input/input2 | |
| [ 1.543765] rtc_cmos 00:04: RTC can wake from S4 | |
| [ 1.544837] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 | |
| [ 1.545816] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs | |
| [ 1.546766] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 | |
| [ 1.547881] EDAC MC: Ver: 2.1.0 | |
| [ 1.549029] cpuidle: using governor ladder | |
| [ 1.550011] cpuidle: using governor menu | |
| [ 1.550888] EFI Variables Facility v0.08 2004-May-17 | |
| [ 1.552666] usbcore: registered new interface driver usbhid | |
| [ 1.553530] usbhid: USB HID core driver | |
| [ 1.554814] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 | |
| [ 1.555743] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X | |
| [ 1.555761] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 | |
| [ 1.620711] ata2.00: SATA link down (SStatus 0 SControl 300) | |
| [ 1.621624] ata2.01: SATA link down (SStatus 0 SControl 300) | |
| [ 1.640701] ata1.00: SATA link down (SStatus 0 SControl 300) | |
| [ 1.641571] ata1.01: SATA link down (SStatus 0 SControl 300) | |
| [ 1.645255] hda_codec: ALC888: BIOS auto-probing. | |
| [ 1.653391] ALSA device list: | |
| [ 1.654336] #0: HDA Intel at 0xfdff4000 irq 43 | |
| [ 1.655285] Netfilter messages via NETLINK v0.30. | |
| [ 1.656242] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) | |
| [ 1.657330] ctnetlink v0.93: registering with nfnetlink. | |
| [ 1.658320] ip_tables: (C) 2000-2006 Netfilter Core Team | |
| [ 1.659196] TCP cubic registered | |
| [ 1.660048] Initializing XFRM netlink socket | |
| [ 1.661198] NET: Registered protocol family 10 | |
| [ 1.662213] ip6_tables: (C) 2000-2006 Netfilter Core Team | |
| [ 1.663074] IPv6 over IPv4 tunneling driver | |
| [ 1.664142] NET: Registered protocol family 17 | |
| [ 1.665057] Registering the dns_resolver key type | |
| [ 1.666107] registered taskstats version 1 | |
| [ 1.677889] console [netcon0] enabled | |
| [ 1.678730] netconsole: network logging started | |
| [ 1.770026] Refined TSC clocksource calibration: 2393.999 MHz. | |
| [ 1.770939] Switching to clocksource tsc | |
| [ 1.783722] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X | |
| [ 1.840056] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X | |
| [ 1.840487] ADDRCONF(NETDEV_UP): eth0: link is not ready | |
| [ 2.290021] usb usb3: suspend_rh (auto-stop) | |
| [ 2.290041] usb usb4: suspend_rh (auto-stop) | |
| [ 2.290060] usb usb5: suspend_rh (auto-stop) | |
| [ 2.290079] usb usb6: suspend_rh (auto-stop) | |
| [ 2.290098] usb usb7: suspend_rh (auto-stop) | |
| [ 2.290117] usb usb8: suspend_rh (auto-stop) | |
| [ 8.490764] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx | |
| [ 8.491608] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO | |
| [ 8.500437] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
| [ 8.520028] Sending DHCP requests .., OK | |
| [ 10.740018] IP-Config: Got DHCP answer from XXX.XX.XX.XXX, my address is XXX.XX.XX.XX | |
| [ 10.741351] IP-Config: Complete: | |
| [ 10.742179] device=eth0, addr=XXX.XX.XX.XXX, mask=255.255.255.0, gw=XXX.XX.XX.X, | |
| [ 10.742220] host=vostro, domain=XXXXXX.XX.X.XXXXXXX.XX.XX, nis-domain=(none), | |
| [ 10.743070] bootserver=XXX.XX.XX.XXX, rootserver=XXX.XX.XX.XXX, rootpath= | |
| [ 10.749072] VFS: Mounted root (nfs filesystem) readonly on device 0:13. | |
| [ 10.750743] Freeing unused kernel memory: 620k freed | |
| [ 14.826076] udevd[1166]: starting version 171 | |
| [ 15.287611] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) | |
| [ 15.289324] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 | |
| [ 15.289419] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0460) | |
| [ 15.289466] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) | |
| [ 19.175521] microcode: CPU0 sig=0x6fb, pf=0x10, revision=0xb6 | |
| [ 19.207018] microcode: CPU1 sig=0x6fb, pf=0x10, revision=0xb6 | |
| [ 19.210580] microcode: CPU2 sig=0x6fb, pf=0x10, revision=0xb6 | |
| [ 19.215747] microcode: CPU3 sig=0x6fb, pf=0x10, revision=0xb6 | |
| [ 19.219131] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba | |
| [ 19.414487] microcode: CPU0 updated to revision 0xba, date = 2010-10-03 | |
| [ 19.420002] microcode: CPU1 updated to revision 0xba, date = 2010-10-03 | |
| [ 19.431767] microcode: CPU2 updated to revision 0xba, date = 2010-10-03 | |
| [ 19.440433] microcode: CPU3 updated to revision 0xba, date = 2010-10-03 | |
| [ 19.470038] eth0: no IPv6 routers present | |
| [ 19.472291] microcode: Microcode Update Driver: v2.00 removed. | |
| # dmidecode 2.10 | |
| SMBIOS 2.5 present. | |
| 50 structures occupying 1512 bytes. | |
| Table at 0x000F0000. | |
| Handle 0x0000, DMI type 0, 24 bytes | |
| BIOS Information | |
| Vendor: Dell Inc. | |
| Version: 1.0.15 | |
| Release Date: 06/23/2008 | |
| Address: 0xE0000 | |
| Runtime Size: 128 kB | |
| ROM Size: 2048 kB | |
| Characteristics: | |
| ISA is supported | |
| PCI is supported | |
| PNP is supported | |
| APM is supported | |
| BIOS is upgradeable | |
| BIOS shadowing is allowed | |
| Boot from CD is supported | |
| Selectable boot is supported | |
| BIOS ROM is socketed | |
| EDD is supported | |
| 5.25"/360 kB floppy services are supported (int 13h) | |
| 5.25"/1.2 MB floppy services are supported (int 13h) | |
| 3.5"/720 kB floppy services are supported (int 13h) | |
| 3.5"/2.88 MB floppy services are supported (int 13h) | |
| Print screen service is supported (int 5h) | |
| 8042 keyboard services are supported (int 9h) | |
| Serial services are supported (int 14h) | |
| Printer services are supported (int 17h) | |
| CGA/mono video services are supported (int 10h) | |
| ACPI is supported | |
| USB legacy is supported | |
| LS-120 boot is supported | |
| ATAPI Zip drive boot is supported | |
| BIOS boot specification is supported | |
| Function key-initiated network boot is supported | |
| Targeted content distribution is supported | |
| BIOS Revision: 1.0 | |
| Handle 0x0001, DMI type 1, 27 bytes | |
| System Information | |
| Manufacturer: Dell Inc. | |
| Product Name: Vostro 400 | |
| Version: | |
| Serial Number: 1TQ2DBX | |
| UUID: 44454C4C-5400-1051-8032-B1C04F444258 | |
| Wake-up Type: Power Switch | |
| SKU Number: | |
| Family: | |
| Handle 0x0002, DMI type 2, 10 bytes | |
| Base Board Information | |
| Manufacturer: Dell Inc. | |
| Product Name: 0GN723 | |
| Version: ... | |
| Serial Number: ..CN7360481702H9. | |
| Asset Tag: | |
| Features: | |
| Board is a hosting board | |
| Handle 0x0003, DMI type 3, 17 bytes | |
| Chassis Information | |
| Manufacturer: Dell Inc. | |
| Type: Desktop | |
| Lock: Not Present | |
| Version: OEM | |
| Serial Number: 1TQ2DBX | |
| Asset Tag: | |
| Boot-up State: Unknown | |
| Power Supply State: Unknown | |
| Thermal State: Unknown | |
| Security Status: Unknown | |
| OEM Information: 0x00000000 | |
| Handle 0x0004, DMI type 4, 40 bytes | |
| Processor Information | |
| Socket Designation: Socket 775 | |
| Type: Central Processor | |
| Family: Other | |
| Manufacturer: Intel | |
| ID: FB 06 00 00 FF FB EB BF | |
| Signature: Type 0, Family 6, Model 15, Stepping 11 | |
| Flags: | |
| FPU (Floating-point unit on-chip) | |
| VME (Virtual mode extension) | |
| DE (Debugging extension) | |
| PSE (Page size extension) | |
| TSC (Time stamp counter) | |
| MSR (Model specific registers) | |
| PAE (Physical address extension) | |
| MCE (Machine check exception) | |
| CX8 (CMPXCHG8 instruction supported) | |
| APIC (On-chip APIC hardware supported) | |
| SEP (Fast system call) | |
| MTRR (Memory type range registers) | |
| PGE (Page global enable) | |
| MCA (Machine check architecture) | |
| CMOV (Conditional move instruction supported) | |
| PAT (Page attribute table) | |
| PSE-36 (36-bit page size extension) | |
| CLFSH (CLFLUSH instruction supported) | |
| DS (Debug store) | |
| ACPI (ACPI supported) | |
| MMX (MMX technology supported) | |
| FXSR (Fast floating-point save and restore) | |
| SSE (Streaming SIMD extensions) | |
| SSE2 (Streaming SIMD extensions 2) | |
| SS (Self-snoop) | |
| HTT (Hyper-threading technology) | |
| TM (Thermal monitor supported) | |
| PBE (Pending break enabled) | |
| Version: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz | |
| Voltage: 0.0 V | |
| External Clock: 266 MHz | |
| Max Speed: 4000 MHz | |
| Current Speed: 2400 MHz | |
| Status: Populated, Enabled | |
| Upgrade: ZIF Socket | |
| L1 Cache Handle: 0x000A | |
| L2 Cache Handle: 0x000B | |
| L3 Cache Handle: Not Provided | |
| Serial Number: | |
| Asset Tag: | |
| Part Number: | |
| Core Count: 4 | |
| Core Enabled: 4 | |
| Thread Count: 4 | |
| Characteristics: | |
| 64-bit capable | |
| Handle 0x0005, DMI type 5, 24 bytes | |
| Memory Controller Information | |
| Error Detecting Method: 8-bit Parity | |
| Error Correcting Capabilities: | |
| None | |
| Supported Interleave: One-way Interleave | |
| Current Interleave: One-way Interleave | |
| Maximum Memory Module Size: 2048 MB | |
| Maximum Total Memory Size: 8192 MB | |
| Supported Speeds: | |
| Other | |
| Supported Memory Types: | |
| DIMM | |
| Memory Module Voltage: 5.0 V | |
| Associated Memory Slots: 4 | |
| 0x0006 | |
| 0x0007 | |
| 0x0008 | |
| 0x0009 | |
| Enabled Error Correcting Capabilities: | |
| None | |
| Handle 0x0006, DMI type 6, 12 bytes | |
| Memory Module Information | |
| Socket Designation: DIMM1 | |
| Bank Connections: 0 | |
| Current Speed: Unknown | |
| Type: DIMM | |
| Installed Size: 512 MB (Single-bank Connection) | |
| Enabled Size: 512 MB (Single-bank Connection) | |
| Error Status: OK | |
| Handle 0x0007, DMI type 6, 12 bytes | |
| Memory Module Information | |
| Socket Designation: DIMM2 | |
| Bank Connections: None | |
| Current Speed: Unknown | |
| Type: Unknown | |
| Installed Size: Not Installed | |
| Enabled Size: Not Installed | |
| Error Status: OK | |
| Handle 0x0008, DMI type 6, 12 bytes | |
| Memory Module Information | |
| Socket Designation: DIMM3 | |
| Bank Connections: 4 | |
| Current Speed: Unknown | |
| Type: DIMM | |
| Installed Size: 512 MB (Single-bank Connection) | |
| Enabled Size: 512 MB (Single-bank Connection) | |
| Error Status: OK | |
| Handle 0x0009, DMI type 6, 12 bytes | |
| Memory Module Information | |
| Socket Designation: DIMM4 | |
| Bank Connections: 6 7 | |
| Current Speed: Unknown | |
| Type: DIMM | |
| Installed Size: 2048 MB (Double-bank Connection) | |
| Enabled Size: 2048 MB (Double-bank Connection) | |
| Error Status: OK | |
| Handle 0x000A, DMI type 7, 19 bytes | |
| Cache Information | |
| Socket Designation: Internal Cache | |
| Configuration: Enabled, Not Socketed, Level 1 | |
| Operational Mode: Write Back | |
| Location: Internal | |
| Installed Size: 32 kB | |
| Maximum Size: 32 kB | |
| Supported SRAM Types: | |
| Synchronous | |
| Installed SRAM Type: Synchronous | |
| Speed: Unknown | |
| Error Correction Type: Unknown | |
| System Type: Unknown | |
| Associativity: Unknown | |
| Handle 0x000B, DMI type 7, 19 bytes | |
| Cache Information | |
| Socket Designation: External Cache | |
| Configuration: Enabled, Not Socketed, Level 2 | |
| Operational Mode: Write Back | |
| Location: External | |
| Installed Size: 8192 kB | |
| Maximum Size: 8192 kB | |
| Supported SRAM Types: | |
| Synchronous | |
| Installed SRAM Type: Synchronous | |
| Speed: Unknown | |
| Error Correction Type: Unknown | |
| System Type: Unknown | |
| Associativity: Unknown | |
| Handle 0x000C, DMI type 8, 9 bytes | |
| Port Connector Information | |
| Internal Reference Designator: SATA-0 | |
| Internal Connector Type: SAS/SATA Plug Receptacle | |
| External Reference Designator: SATA-0 | |
| External Connector Type: SAS/SATA Plug Receptacle | |
| Port Type: SATA | |
| Handle 0x000D, DMI type 8, 9 bytes | |
| Port Connector Information | |
| Internal Reference Designator: SATA-1 | |
| Internal Connector Type: SAS/SATA Plug Receptacle | |
| External Reference Designator: SATA-1 | |
| External Connector Type: SAS/SATA Plug Receptacle | |
| Port Type: SATA | |
| Handle 0x000E, DMI type 8, 9 bytes | |
| Port Connector Information | |
| Internal Reference Designator: SATA-4 | |
| Internal Connector Type: SAS/SATA Plug Receptacle | |
| External Reference Designator: SATA-4 | |
| External Connector Type: SAS/SATA Plug Receptacle | |
| Port Type: SATA | |
| Handle 0x000F, DMI type 8, 9 bytes | |
| Port Connector Information | |
| Internal Reference Designator: SATA-5 | |
| Internal Connector Type: SAS/SATA Plug Receptacle | |
| External Reference Designator: SATA-5 | |
| External Connector Type: SAS/SATA Plug Receptacle | |
| Port Type: SATA | |
| Handle 0x0010, DMI type 8, 9 bytes | |
| Port Connector Information | |
| Internal Reference Designator: FDD | |
| Internal Connector Type: On Board Floppy | |
| External Reference Designator: Not Specified | |
| External Connector Type: None | |
| Port Type: 8251 FIFO Compatible | |
| Handle 0x0011, DMI type 8, 9 bytes | |
| Port Connector Information | |
| Internal Reference Designator: Not Specified | |
| Internal Connector Type: None | |
| External Reference Designator: USB1 | |
| External Connector Type: Other | |
| Port Type: USB | |
| Handle 0x0012, DMI type 8, 9 bytes | |
| Port Connector Information | |
| Internal Reference Designator: Not Specified | |
| Internal Connector Type: None | |
| External Reference Designator: USB2 | |
| External Connector Type: Other | |
| Port Type: USB | |
| Handle 0x0013, DMI type 8, 9 bytes | |
| Port Connector Information | |
| Internal Reference Designator: Not Specified | |
| Internal Connector Type: None | |
| External Reference Designator: USB3 | |
| External Connector Type: Other | |
| Port Type: USB | |
| Handle 0x0014, DMI type 8, 9 bytes | |
| Port Connector Information | |
| Internal Reference Designator: Not Specified | |
| Internal Connector Type: None | |
| External Reference Designator: USB4 | |
| External Connector Type: Other | |
| Port Type: USB | |
| Handle 0x0015, DMI type 8, 9 bytes | |
| Port Connector Information | |
| Internal Reference Designator: Not Specified | |
| Internal Connector Type: None | |
| External Reference Designator: USB5 | |
| External Connector Type: Other | |
| Port Type: USB | |
| Handle 0x0016, DMI type 8, 9 bytes | |
| Port Connector Information | |
| Internal Reference Designator: Not Specified | |
| Internal Connector Type: None | |
| External Reference Designator: USB6 | |
| External Connector Type: Other | |
| Port Type: USB | |
| Handle 0x0017, DMI type 8, 9 bytes | |
| Port Connector Information | |
| Internal Reference Designator: Not Specified | |
| Internal Connector Type: None | |
| External Reference Designator: USB7 | |
| External Connector Type: Other | |
| Port Type: USB | |
| Handle 0x0018, DMI type 8, 9 bytes | |
| Port Connector Information | |
| Internal Reference Designator: Not Specified | |
| Internal Connector Type: None | |
| External Reference Designator: USB8 | |
| External Connector Type: Other | |
| Port Type: USB | |
| Handle 0x0019, DMI type 8, 9 bytes | |
| Port Connector Information | |
| Internal Reference Designator: Not Specified | |
| Internal Connector Type: None | |
| External Reference Designator: USB9 | |
| External Connector Type: Other | |
| Port Type: USB | |
| Handle 0x001A, DMI type 8, 9 bytes | |
| Port Connector Information | |
| Internal Reference Designator: Not Specified | |
| Internal Connector Type: None | |
| External Reference Designator: USB10 | |
| External Connector Type: Other | |
| Port Type: USB | |
| Handle 0x001B, DMI type 8, 9 bytes | |
| Port Connector Information | |
| Internal Reference Designator: Not Specified | |
| Internal Connector Type: None | |
| External Reference Designator: VIDEO | |
| External Connector Type: DB-15 female | |
| Port Type: Video Port | |
| Handle 0x001C, DMI type 8, 9 bytes | |
| Port Connector Information | |
| Internal Reference Designator: Not Specified | |
| Internal Connector Type: None | |
| External Reference Designator: AUDIO | |
| External Connector Type: None | |
| Port Type: Audio Port | |
| Handle 0x001D, DMI type 8, 9 bytes | |
| Port Connector Information | |
| Internal Reference Designator: Not Specified | |
| Internal Connector Type: None | |
| External Reference Designator: ETHERNET | |
| External Connector Type: RJ-45 | |
| Port Type: Network Port | |
| Handle 0x001E, DMI type 9, 13 bytes | |
| System Slot Information | |
| Designation: PCI1 | |
| Type: 32-bit PCI | |
| Current Usage: Available | |
| Length: Long | |
| ID: 1 | |
| Characteristics: | |
| 5.0 V is provided | |
| PME signal is supported | |
| Handle 0x001F, DMI type 9, 13 bytes | |
| System Slot Information | |
| Designation: PCI2 | |
| Type: 32-bit PCI | |
| Current Usage: Available | |
| Length: Long | |
| ID: 2 | |
| Characteristics: | |
| 5.0 V is provided | |
| PME signal is supported | |
| Handle 0x0020, DMI type 9, 13 bytes | |
| System Slot Information | |
| Designation: PCI3 | |
| Type: x16 PCI Express | |
| Current Usage: Available | |
| Length: Long | |
| ID: 3 | |
| Characteristics: | |
| 5.0 V is provided | |
| PME signal is supported | |
| Handle 0x0021, DMI type 9, 13 bytes | |
| System Slot Information | |
| Designation: PCI4 | |
| Type: x1 PCI Express | |
| Current Usage: Available | |
| Length: Long | |
| ID: 6 | |
| Characteristics: | |
| 5.0 V is provided | |
| PME signal is supported | |
| Handle 0x0022, DMI type 11, 5 bytes | |
| OEM Strings | |
| String 1: www.dell.com | |
| Handle 0x0023, DMI type 13, 22 bytes | |
| BIOS Language Information | |
| Installable Languages: 3 | |
| n|US|iso8859-1 | |
| n|US|iso8859-1 | |
| r|CA|iso8859-1 | |
| Currently Installed Language: n|US|iso8859-1 | |
| Handle 0x0024, DMI type 16, 15 bytes | |
| Physical Memory Array | |
| Location: System Board Or Motherboard | |
| Use: System Memory | |
| Error Correction Type: None | |
| Maximum Capacity: 4 GB | |
| Error Information Handle: Not Provided | |
| Number Of Devices: 4 | |
| Handle 0x0025, DMI type 17, 27 bytes | |
| Memory Device | |
| Array Handle: 0x0024 | |
| Error Information Handle: Not Provided | |
| Total Width: 64 bits | |
| Data Width: 64 bits | |
| Size: 512 MB | |
| Form Factor: DIMM | |
| Set: None | |
| Locator: DIMM1 | |
| Bank Locator: | |
| Type: DDR2 | |
| Type Detail: Synchronous | |
| Speed: 667 MHz | |
| Manufacturer: 2C00000000000000 | |
| Serial Number: DE0C01F9 | |
| Asset Tag: 080738 | |
| Part Number: 4HTF6464AY-667E1 | |
| Handle 0x0026, DMI type 17, 27 bytes | |
| Memory Device | |
| Array Handle: 0x0024 | |
| Error Information Handle: Not Provided | |
| Total Width: Unknown | |
| Data Width: Unknown | |
| Size: No Module Installed | |
| Form Factor: DIMM | |
| Set: None | |
| Locator: DIMM2 | |
| Bank Locator: | |
| Type: Unknown | |
| Type Detail: Unknown | |
| Speed: Unknown | |
| Manufacturer: 7F7F7F8300000000 | |
| Serial Number: 00000000 | |
| Asset Tag: 010000 | |
| Part Number: | |
| Handle 0x0027, DMI type 17, 27 bytes | |
| Memory Device | |
| Array Handle: 0x0024 | |
| Error Information Handle: Not Provided | |
| Total Width: 64 bits | |
| Data Width: 64 bits | |
| Size: 512 MB | |
| Form Factor: DIMM | |
| Set: None | |
| Locator: DIMM3 | |
| Bank Locator: | |
| Type: DDR2 | |
| Type Detail: Synchronous | |
| Speed: 667 MHz | |
| Manufacturer: CE00000000000000 | |
| Serial Number: F304A400 | |
| Asset Tag: 020707 | |
| Part Number: M3 78T6553EZS-CE6 | |
| Handle 0x0028, DMI type 17, 27 bytes | |
| Memory Device | |
| Array Handle: 0x0024 | |
| Error Information Handle: Not Provided | |
| Total Width: 64 bits | |
| Data Width: 64 bits | |
| Size: 2048 MB | |
| Form Factor: DIMM | |
| Set: None | |
| Locator: DIMM4 | |
| Bank Locator: | |
| Type: DDR2 | |
| Type Detail: Synchronous | |
| Speed: 667 MHz | |
| Manufacturer: 7F7F7F8300000000 | |
| Serial Number: 00000000 | |
| Asset Tag: 010000 | |
| Part Number: | |
| Handle 0x0029, DMI type 19, 15 bytes | |
| Memory Array Mapped Address | |
| Starting Address: 0x00000000000 | |
| Ending Address: 0x000BFFFFFFF | |
| Range Size: 3 GB | |
| Physical Array Handle: 0x0024 | |
| Partition Width: 0 | |
| Handle 0x002A, DMI type 20, 19 bytes | |
| Memory Device Mapped Address | |
| Starting Address: 0x00000000000 | |
| Ending Address: 0x0001FFFFFFF | |
| Range Size: 512 MB | |
| Physical Device Handle: 0x0025 | |
| Memory Array Mapped Address Handle: 0x0029 | |
| Partition Row Position: 1 | |
| Handle 0x002B, DMI type 20, 19 bytes | |
| Memory Device Mapped Address | |
| Starting Address: 0x00000000000 | |
| Ending Address: 0x000000003FF | |
| Range Size: 1 kB | |
| Physical Device Handle: 0x0026 | |
| Memory Array Mapped Address Handle: 0x0029 | |
| Partition Row Position: 1 | |
| Handle 0x002C, DMI type 20, 19 bytes | |
| Memory Device Mapped Address | |
| Starting Address: 0x00020000000 | |
| Ending Address: 0x0003FFFFFFF | |
| Range Size: 512 MB | |
| Physical Device Handle: 0x0027 | |
| Memory Array Mapped Address Handle: 0x0029 | |
| Partition Row Position: 1 | |
| Handle 0x002D, DMI type 20, 19 bytes | |
| Memory Device Mapped Address | |
| Starting Address: 0x00040000000 | |
| Ending Address: 0x000BFFFFFFF | |
| Range Size: 2 GB | |
| Physical Device Handle: 0x0028 | |
| Memory Array Mapped Address Handle: 0x0029 | |
| Partition Row Position: 1 | |
| Handle 0x002E, DMI type 32, 11 bytes | |
| System Boot Information | |
| Status: No errors detected | |
| Handle 0x002F, DMI type 160, 11 bytes | |
| OEM-specific Type | |
| Header and Data: | |
| A0 0B 2F 00 46 44 4D 49 55 AA AA | |
| Handle 0x0030, DMI type 208, 26 bytes | |
| OEM-specific Type | |
| Header and Data: | |
| D0 1A 30 00 02 01 FE 00 3D 02 00 00 00 00 00 00 | |
| 00 00 00 00 00 00 00 00 00 00 | |
| Handle 0x0031, DMI type 127, 4 bytes | |
| End Of Table | |
| 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02) | |
| Subsystem: Dell Device 023d | |
| Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- | |
| Latency: 0 | |
| Capabilities: [e0] Vendor Specific Information: Len=0b <?> | |
| Kernel driver in use: agpgart-intel | |
| 00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02) (prog-if 00 [Normal decode]) | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ | |
| Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0, Cache Line Size: 64 bytes | |
| Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 | |
| I/O behind bridge: 0000c000-0000cfff | |
| Memory behind bridge: fde00000-fdefffff | |
| Prefetchable memory behind bridge: 00000000fda00000-00000000fdafffff | |
| Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- | |
| BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- | |
| PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- | |
| Capabilities: [88] Subsystem: Dell Device 023d | |
| Capabilities: [80] Power Management version 3 | |
| Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) | |
| Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- | |
| Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- | |
| Address: fee0f00c Data: 4141 | |
| Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00 | |
| DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us | |
| ExtTag- RBE+ FLReset- | |
| DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- | |
| RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- | |
| MaxPayload 128 bytes, MaxReadReq 128 bytes | |
| DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- | |
| LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <1us, L1 <4us | |
| ClockPM- Surprise- LLActRep- BwNot- | |
| LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk- | |
| ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- | |
| LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- | |
| SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- | |
| Slot #0, PowerLimit 0.000W; Interlock- NoCompl+ | |
| SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- | |
| Control: AttnInd Off, PwrInd On, Power- Interlock- | |
| SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- | |
| Changed: MRL- PresDet- LinkState- | |
| RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- | |
| RootCap: CRSVisible- | |
| RootSta: PME ReqID 0000, PMEStatus- PMEPending- | |
| Capabilities: [100 v1] Virtual Channel | |
| Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 | |
| Arb: Fixed- WRR32- WRR64- WRR128- | |
| Ctrl: ArbSelect=Fixed | |
| Status: InProgress- | |
| VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- | |
| Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- | |
| Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 | |
| Status: NegoPending- InProgress- | |
| Capabilities: [140 v1] Root Complex Link | |
| Desc: PortNumber=02 ComponentID=01 EltType=Config | |
| Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+ | |
| Addr: 00000000fed19000 | |
| Kernel driver in use: pcieport | |
| 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller]) | |
| Subsystem: Dell Device 023d | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ | |
| Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0 | |
| Interrupt: pin A routed to IRQ 41 | |
| Region 0: Memory at fdf00000 (32-bit, non-prefetchable) [size=512K] | |
| Region 1: I/O ports at ff00 [size=8] | |
| Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] | |
| Region 3: Memory at fdb00000 (32-bit, non-prefetchable) [size=1M] | |
| Expansion ROM at <unassigned> [disabled] | |
| Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- | |
| Address: fee0f00c Data: 4149 | |
| Capabilities: [d0] Power Management version 2 | |
| Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) | |
| Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- | |
| Kernel driver in use: i915 | |
| 00:19.0 Ethernet controller: Intel Corporation 82562V-2 10/100 Network Connection (rev 02) | |
| Subsystem: Dell Device 023d | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ | |
| Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0 | |
| Interrupt: pin A routed to IRQ 42 | |
| Region 0: Memory at fdfc0000 (32-bit, non-prefetchable) [size=128K] | |
| Region 1: Memory at fdfff000 (32-bit, non-prefetchable) [size=4K] | |
| Region 2: I/O ports at fe00 [size=32] | |
| Capabilities: [c8] Power Management version 2 | |
| Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) | |
| Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- | |
| Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ | |
| Address: 00000000fee0f00c Data: 4199 | |
| Capabilities: [e0] Vendor Specific Information: Len=06 <?> | |
| Kernel driver in use: e1000e | |
| 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI]) | |
| Subsystem: Dell Device 023d | |
| Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0 | |
| Interrupt: pin A routed to IRQ 16 | |
| Region 4: I/O ports at fd00 [size=32] | |
| Capabilities: [50] Vendor Specific Information: Len=06 <?> | |
| Kernel driver in use: uhci_hcd | |
| 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) (prog-if 00 [UHCI]) | |
| Subsystem: Dell Device 023d | |
| Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0 | |
| Interrupt: pin B routed to IRQ 21 | |
| Region 4: I/O ports at fc00 [size=32] | |
| Capabilities: [50] Vendor Specific Information: Len=06 <?> | |
| Kernel driver in use: uhci_hcd | |
| 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) (prog-if 00 [UHCI]) | |
| Subsystem: Dell Device 023d | |
| Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0 | |
| Interrupt: pin D routed to IRQ 19 | |
| Region 4: I/O ports at fb00 [size=32] | |
| Capabilities: [50] Vendor Specific Information: Len=06 <?> | |
| Kernel driver in use: uhci_hcd | |
| 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) (prog-if 20 [EHCI]) | |
| Subsystem: Dell Device 023d | |
| Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0 | |
| Interrupt: pin C routed to IRQ 18 | |
| Region 0: Memory at fdffe000 (32-bit, non-prefetchable) [size=1K] | |
| Capabilities: [50] Power Management version 2 | |
| Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) | |
| Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- | |
| Capabilities: [58] Debug port: BAR=1 offset=00a0 | |
| Capabilities: [98] Vendor Specific Information: Len=06 <?> | |
| Kernel driver in use: ehci_hcd | |
| 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) | |
| Subsystem: Dell Device 023d | |
| Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ | |
| Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0, Cache Line Size: 64 bytes | |
| Interrupt: pin A routed to IRQ 43 | |
| Region 0: Memory at fdff4000 (64-bit, non-prefetchable) [size=16K] | |
| Capabilities: [50] Power Management version 2 | |
| Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) | |
| Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- | |
| Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ | |
| Address: 00000000fee0f00c Data: 4189 | |
| Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 | |
| DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us | |
| ExtTag- RBE- FLReset+ | |
| DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- | |
| RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ | |
| MaxPayload 128 bytes, MaxReadReq 128 bytes | |
| DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- | |
| LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us | |
| ClockPM- Surprise- LLActRep- BwNot- | |
| LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- | |
| ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- | |
| LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- | |
| Capabilities: [100 v1] Virtual Channel | |
| Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 | |
| Arb: Fixed- WRR32- WRR64- WRR128- | |
| Ctrl: ArbSelect=Fixed | |
| Status: InProgress- | |
| VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- | |
| Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- | |
| Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 | |
| Status: NegoPending- InProgress- | |
| VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- | |
| Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- | |
| Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80 | |
| Status: NegoPending- InProgress- | |
| Capabilities: [130 v1] Root Complex Link | |
| Desc: PortNumber=0f ComponentID=02 EltType=Config | |
| Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ | |
| Addr: 00000000fed1c000 | |
| Kernel driver in use: snd_hda_intel | |
| 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI]) | |
| Subsystem: Dell Device 023d | |
| Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0 | |
| Interrupt: pin A routed to IRQ 23 | |
| Region 4: I/O ports at fa00 [size=32] | |
| Capabilities: [50] Vendor Specific Information: Len=06 <?> | |
| Kernel driver in use: uhci_hcd | |
| 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI]) | |
| Subsystem: Dell Device 023d | |
| Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0 | |
| Interrupt: pin B routed to IRQ 19 | |
| Region 4: I/O ports at f900 [size=32] | |
| Capabilities: [50] Vendor Specific Information: Len=06 <?> | |
| Kernel driver in use: uhci_hcd | |
| 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI]) | |
| Subsystem: Dell Device 023d | |
| Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0 | |
| Interrupt: pin C routed to IRQ 18 | |
| Region 4: I/O ports at f800 [size=32] | |
| Capabilities: [50] Vendor Specific Information: Len=06 <?> | |
| Kernel driver in use: uhci_hcd | |
| 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20 [EHCI]) | |
| Subsystem: Dell Device 023d | |
| Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0 | |
| Interrupt: pin A routed to IRQ 23 | |
| Region 0: Memory at fdffd000 (32-bit, non-prefetchable) [size=1K] | |
| Capabilities: [50] Power Management version 2 | |
| Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) | |
| Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- | |
| Capabilities: [58] Debug port: BAR=1 offset=00a0 | |
| Capabilities: [98] Vendor Specific Information: Len=06 <?> | |
| Kernel driver in use: ehci_hcd | |
| 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) (prog-if 01 [Subtractive decode]) | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0 | |
| Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 | |
| I/O behind bridge: 0000d000-0000dfff | |
| Memory behind bridge: fdd00000-fddfffff | |
| Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff | |
| Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- | |
| BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- | |
| PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- | |
| Capabilities: [50] Subsystem: Dell Device 023d | |
| 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) | |
| Subsystem: Dell Device 023d | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- | |
| Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0 | |
| Capabilities: [e0] Vendor Specific Information: Len=0c <?> | |
| Kernel modules: iTCO_wdt | |
| 00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA Controller [IDE mode] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) | |
| Subsystem: Dell Device 023d | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0 | |
| Interrupt: pin A routed to IRQ 19 | |
| Region 0: I/O ports at f700 [size=8] | |
| Region 1: I/O ports at f600 [size=4] | |
| Region 2: I/O ports at f500 [size=8] | |
| Region 3: I/O ports at f400 [size=4] | |
| Region 4: I/O ports at f300 [size=16] | |
| Region 5: I/O ports at f200 [size=16] | |
| Capabilities: [70] Power Management version 3 | |
| Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) | |
| Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- | |
| Capabilities: [b0] Vendor Specific Information: Len=06 <?> | |
| Kernel driver in use: ata_piix | |
| 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) | |
| Subsystem: Dell Device 023d | |
| Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Interrupt: pin B routed to IRQ 18 | |
| Region 0: Memory at fdffc000 (64-bit, non-prefetchable) [size=256] | |
| Region 4: I/O ports at 0500 [size=32] | |
| Kernel driver in use: i801_smbus | |
| 00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] (rev 02) (prog-if 85 [Master SecO PriO]) | |
| Subsystem: Dell Device 023d | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0 | |
| Interrupt: pin A routed to IRQ 19 | |
| Region 0: I/O ports at f000 [size=8] | |
| Region 1: I/O ports at ef00 [size=4] | |
| Region 2: I/O ports at ee00 [size=8] | |
| Region 3: I/O ports at ed00 [size=4] | |
| Region 4: I/O ports at ec00 [size=16] | |
| Region 5: I/O ports at eb00 [size=16] | |
| Capabilities: [70] Power Management version 3 | |
| Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) | |
| Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- | |
| Capabilities: [b0] Vendor Specific Information: Len=06 <?> | |
| Kernel driver in use: ata_piix |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment