IBM ThinkPad R40 (2681-DMJ)

thinkpad-r40.txt

/proc/cpuinfo:
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 15
model		: 2
model name	: Mobile Intel(R) Pentium(R) 4 - M CPU 1.90GHz
stepping	: 7
microcode	: 0x39
cpu MHz		: 1200.000
cache size	: 512 KB
physical id	: 0
siblings	: 1
core id		: 0
cpu cores	: 1
apicid		: 0
initial apicid	: 0
fdiv_bug	: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe pebs bts cid xtpr
bogomips	: 2391.98
clflush size	: 64
cache_alignment	: 128
address sizes	: 36 bits physical, 32 bits virtual
power management:


-[0000:00]-+-00.0  Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge [8086:1a30]
           +-01.0-[01]----00.0  Advanced Micro Devices, Inc. [AMD/ATI] RV200/M7 [Mobility Radeon 7500] [1002:4c57]
           +-1d.0  Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2]
           +-1d.1  Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4]
           +-1d.2  Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7]
           +-1d.7  Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd]
           +-1e.0-[02-05]--+-00.0  Texas Instruments PCI1510 PC card Cardbus Controller [104c:ac56]
           |               +-07.0  Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) [104c:8026]
           |               \-08.0  Intel Corporation 82801DB PRO/100 VE (MOB) Ethernet Controller [8086:103d]
           +-1f.0  Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc]
           +-1f.1  Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca]
           +-1f.3  Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3]
           +-1f.5  Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5]
           \-1f.6  Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6]
/proc/ioports:
0000-0cf7 : PCI Bus 0000:00
  0000-001f : dma1
  0020-0021 : pic1
  0040-0043 : timer0
  0050-0053 : timer1
  0060-0060 : keyboard
  0061-0061 : PNP0800:00
  0062-0062 : PNP0C09:00
    0062-0062 : EC data
  0064-0064 : keyboard
  0066-0066 : PNP0C09:00
    0066-0066 : EC cmd
  0070-0071 : rtc0
  0080-008f : dma page reg
  00a0-00a1 : pic2
  00c0-00df : dma2
  00f0-00ff : fpu
    00f0-00f0 : PNP0C04:00
  0170-0177 : 0000:00:1f.1
    0170-0177 : ata_piix
  01f0-01f7 : 0000:00:1f.1
    01f0-01f7 : ata_piix
  02f8-02ff : nsc-ircc
  0376-0376 : 0000:00:1f.1
    0376-0376 : ata_piix
  03bc-03be : parport0
  03c0-03df : vga+
  03f2-03f2 : floppy
  03f4-03f5 : floppy
  03f6-03f6 : 0000:00:1f.1
    03f6-03f6 : ata_piix
  03f7-03f7 : floppy
  03f8-03ff : serial
0cf8-0cff : PCI conf1
0d00-ffff : PCI Bus 0000:00
  1000-1003 : ACPI PM1a_EVT_BLK
  1004-1005 : ACPI PM1a_CNT_BLK
  1008-100b : ACPI PM_TMR
  1010-1015 : ACPI CPU throttle
  1020-1020 : ACPI PM2_CNT_BLK
  1028-102f : ACPI GPE0_BLK
  1030-1033 : iTCO_wdt
    1030-1033 : iTCO_wdt
  1060-107f : iTCO_wdt
    1060-107f : iTCO_wdt
  1180-11bf : 0000:00:1f.0
    1180-11bf : pnp 00:01
  1600-167f : pnp 00:01
  1800-181f : 0000:00:1d.0
    1800-181f : uhci_hcd
  1820-183f : 0000:00:1d.1
    1820-183f : uhci_hcd
  1840-185f : 0000:00:1d.2
    1840-185f : uhci_hcd
  1860-186f : 0000:00:1f.1
    1860-186f : ata_piix
  1880-189f : 0000:00:1f.3
    1880-189f : i801_smbus
  18c0-18ff : 0000:00:1f.5
    18c0-18ff : Intel 82801DB-ICH4
  1c00-1cff : 0000:00:1f.5
    1c00-1cff : Intel 82801DB-ICH4
  2000-207f : 0000:00:1f.6
    2000-207f : Intel 82801DB-ICH4 Modem
  2400-24ff : 0000:00:1f.6
    2400-24ff : Intel 82801DB-ICH4 Modem
  3000-3fff : PCI Bus 0000:01
    3000-30ff : 0000:01:00.0
  4000-8fff : PCI Bus 0000:02
    4000-40ff : PCI CardBus 0000:03
    4400-44ff : PCI CardBus 0000:03
    8000-803f : 0000:02:08.0
      8000-803f : e100

/proc/iomem:
00000000-00000fff : reserved
00001000-0009efff : System RAM
0009f000-0009ffff : reserved
000a0000-000bffff : PCI Bus 0000:00
  000a0000-000bffff : Video RAM area
000c0000-000cffff : Video ROM
000d0000-000d3fff : PCI Bus 0000:00
000d4000-000d7fff : PCI Bus 0000:00
000d8000-000dbfff : PCI Bus 0000:00
000dc000-000dffff : PCI Bus 0000:00
000e0000-000fffff : reserved
  000e0000-000effff : Extension ROM
  000f0000-000fffff : System ROM
00100000-3ff5ffff : System RAM
  01000000-0148044b : Kernel code
  0148044c-0166fb3f : Kernel data
  0171a000-0178cfff : Kernel bss
3ff60000-3ff77fff : ACPI Tables
3ff78000-3ff79fff : ACPI Non-volatile Storage
3ff7a000-3ff7ffff : RAM buffer
3ff80000-3fffffff : reserved
40000000-febfffff : PCI Bus 0000:00
  40000000-400003ff : 0000:00:1f.1
  50000000-50000fff : 0000:02:00.0
    50000000-50000fff : yenta_socket
  d0000000-d00003ff : 0000:00:1d.7
    d0000000-d00003ff : ehci_hcd
  d0000800-d00008ff : 0000:00:1f.5
    d0000800-d00008ff : Intel 82801DB-ICH4
  d0000c00-d0000dff : 0000:00:1f.5
    d0000c00-d0000dff : Intel 82801DB-ICH4
  d0100000-d01fffff : PCI Bus 0000:01
    d0100000-d010ffff : 0000:01:00.0
    d0120000-d013ffff : 0000:01:00.0
  d0200000-dfffffff : PCI Bus 0000:02
    d0200000-d0203fff : 0000:02:07.0
    d0204000-d0204fff : 0000:02:08.0
      d0204000-d0204fff : e100
    d0205000-d02057ff : 0000:02:07.0
      d0205000-d02057ff : firewire_ohci
    d4000000-d7ffffff : PCI CardBus 0000:03
  e0000000-e3ffffff : 0000:00:00.0
  e8000000-efffffff : PCI Bus 0000:01
    e8000000-efffffff : 0000:01:00.0
  f0000000-f7ffffff : PCI Bus 0000:02
    f0000000-f3ffffff : PCI CardBus 0000:03
ff800000-ffffffff : reserved

/proc/asound/cards:
 0 [I82801DBICH4   ]: ICH4 - Intel 82801DB-ICH4
                      Intel 82801DB-ICH4 with AD1981B at irq 11
 1 [Modem          ]: ICH-MODEM - Intel 82801DB-ICH4 Modem
                      Intel 82801DB-ICH4 Modem at irq 11
29 [ThinkPadEC     ]: ThinkPad EC - ThinkPad Console Audio Control
                      ThinkPad Console Audio Control at EC reg 0x30, fw unknown

# dmidecode 2.12
SMBIOS version fixup (2.31 -> 2.3).
SMBIOS 2.3 present.
53 structures occupying 1815 bytes.
Table at 0x000E0010.

Handle 0x0000, DMI type 0, 20 bytes
BIOS Information
	Vendor: IBM
	Version: 1OET61WW (1.27 )
	Release Date: 06/29/2006
	Address: 0xE0000
	Runtime Size: 128 kB
	ROM Size: 1024 kB
	Characteristics:
		PCI is supported
		PC Card (PCMCIA) is supported
		PNP is supported
		APM is supported
		BIOS is upgradeable
		BIOS shadowing is allowed
		ESCD support is available
		Boot from CD is supported
		Selectable boot is supported
		Boot from PC Card (PCMCIA) is supported
		EDD is supported
		3.5"/720 kB floppy services are supported (int 13h)
		Print screen service is supported (int 5h)
		8042 keyboard services are supported (int 9h)
		Serial services are supported (int 14h)
		Printer services are supported (int 17h)
		CGA/mono video services are supported (int 10h)
		ACPI is supported
		AGP is supported
		LS-120 boot is supported
		BIOS boot specification is supported

Handle 0x0001, DMI type 1, 25 bytes
System Information
	Manufacturer: IBM
	Product Name: 2681DMJ
	Version: Not Available
	Serial Number: xxxxxxx
	UUID: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
	Wake-up Type: Power Switch

Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
	Manufacturer: IBM
	Product Name: 2681DMJ
	Version: Not Available
	Serial Number: xxxxxxxxxxx

Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
	Manufacturer: IBM
	Type: Notebook
	Lock: Not Present
	Version: Not Available
	Serial Number: xxx xxxxxxxxx
	Asset Tag: No Asset Information
	Boot-up State: Unknown
	Power Supply State: Unknown
	Thermal State: Unknown
	Security Status: Unknown
	OEM Information: 0x00000000

Handle 0x0004, DMI type 126, 17 bytes
Inactive

Handle 0x0005, DMI type 126, 17 bytes
Inactive

Handle 0x0006, DMI type 4, 35 bytes
Processor Information
	Socket Designation: None
	Type: Central Processor
	Family: Pentium 4
	Manufacturer: GenuineIntel
	ID: 27 0F 00 00 FF F9 EB BF
	Signature: Type 0, Family 15, Model 2, Stepping 7
	Flags:
		FPU (Floating-point unit on-chip)
		VME (Virtual mode extension)
		DE (Debugging extension)
		PSE (Page size extension)
		TSC (Time stamp counter)
		MSR (Model specific registers)
		PAE (Physical address extension)
		MCE (Machine check exception)
		CX8 (CMPXCHG8 instruction supported)
		SEP (Fast system call)
		MTRR (Memory type range registers)
		PGE (Page global enable)
		MCA (Machine check architecture)
		CMOV (Conditional move instruction supported)
		PAT (Page attribute table)
		PSE-36 (36-bit page size extension)
		CLFSH (CLFLUSH instruction supported)
		DS (Debug store)
		ACPI (ACPI supported)
		MMX (MMX technology supported)
		FXSR (FXSAVE and FXSTOR instructions supported)
		SSE (Streaming SIMD extensions)
		SSE2 (Streaming SIMD extensions 2)
		SS (Self-snoop)
		HTT (Multi-threading)
		TM (Thermal monitor supported)
		PBE (Pending break enabled)
	Version: Pentium(R) 4
	Voltage: 1.3 V
	External Clock: 400 MHz
	Max Speed: 1900 MHz
	Current Speed: 1900 MHz
	Status: Populated, Enabled
	Upgrade: None
	L1 Cache Handle: 0x000A
	L2 Cache Handle: 0x000B
	L3 Cache Handle: Not Provided
	Serial Number: xxx xxxxxxxxx
	Asset Tag: Not Specified
	Part Number: Not Specified

Handle 0x0007, DMI type 5, 20 bytes
Memory Controller Information
	Error Detecting Method: None
	Error Correcting Capabilities:
		None
	Supported Interleave: One-way Interleave
	Current Interleave: One-way Interleave
	Maximum Memory Module Size: 512 MB
	Maximum Total Memory Size: 1024 MB
	Supported Speeds:
		Other
	Supported Memory Types:
		DIMM
		SDRAM
	Memory Module Voltage: 3.3 V
	Associated Memory Slots: 2
		0x0008
		0x0009
	Enabled Error Correcting Capabilities:
		None

Handle 0x0008, DMI type 6, 12 bytes
Memory Module Information
	Socket Designation: DIMM Slot 1
	Bank Connections: 0 1
	Current Speed: Unknown
	Type: DIMM SDRAM
	Installed Size: 512 MB (Double-bank Connection)
	Enabled Size: 512 MB (Double-bank Connection)
	Error Status: OK

Handle 0x0009, DMI type 6, 12 bytes
Memory Module Information
	Socket Designation: DIMM Slot 2
	Bank Connections: 2 3
	Current Speed: Unknown
	Type: DIMM SDRAM
	Installed Size: 512 MB (Double-bank Connection)
	Enabled Size: 512 MB (Double-bank Connection)
	Error Status: OK

Handle 0x000A, DMI type 7, 19 bytes
Cache Information
	Socket Designation: Internal L1 Cache
	Configuration: Enabled, Socketed, Level 1
	Operational Mode: Write Back
	Location: Internal
	Installed Size: 8 kB
	Maximum Size: 8 kB
	Supported SRAM Types:
		Synchronous
	Installed SRAM Type: Synchronous
	Speed: Unknown
	Error Correction Type: Single-bit ECC
	System Type: Data
	Associativity: 4-way Set-associative

Handle 0x000B, DMI type 7, 19 bytes
Cache Information
	Socket Designation: Internal L2 Cache
	Configuration: Enabled, Socketed, Level 2
	Operational Mode: Write Back
	Location: Internal
	Installed Size: 512 kB
	Maximum Size: 512 kB
	Supported SRAM Types:
		Burst
	Installed SRAM Type: Burst
	Speed: Unknown
	Error Correction Type: Multi-bit ECC
	System Type: Unified
	Associativity: 8-way Set-associative

Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Available
	Internal Connector Type: None
	External Reference Designator: Serial
	External Connector Type: DB-9 male
	Port Type: Serial Port 16550A Compatible

Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Available
	Internal Connector Type: None
	External Reference Designator: Infrared
	External Connector Type: Infrared
	Port Type: Other

Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Available
	Internal Connector Type: None
	External Reference Designator: Parallel
	External Connector Type: DB-25 female
	Port Type: Parallel Port ECP/EPP

Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Available
	Internal Connector Type: None
	External Reference Designator: External Monitor
	External Connector Type: DB-15 female
	Port Type: Video Port

Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Available
	Internal Connector Type: None
	External Reference Designator: PS/2 Mouse
	External Connector Type: PS/2
	Port Type: Mouse Port

Handle 0x0011, DMI type 126, 9 bytes
Inactive

Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Available
	Internal Connector Type: None
	External Reference Designator: Line-In Jack
	External Connector Type: Mini Jack (headphones)
	Port Type: Audio Port

Handle 0x0013, DMI type 126, 9 bytes
Inactive

Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Available
	Internal Connector Type: None
	External Reference Designator: Microphone Jack
	External Connector Type: Mini Jack (headphones)
	Port Type: Audio Port

Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Available
	Internal Connector Type: None
	External Reference Designator: Headphone Jack
	External Connector Type: Mini Jack (headphones)
	Port Type: Audio Port

Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Available
	Internal Connector Type: None
	External Reference Designator: S-Video-Out
	External Connector Type: Other
	Port Type: Video Port

Handle 0x0017, DMI type 126, 9 bytes
Inactive

Handle 0x0018, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Available
	Internal Connector Type: None
	External Reference Designator: Modem
	External Connector Type: RJ-11
	Port Type: Modem Port

Handle 0x0019, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Available
	Internal Connector Type: None
	External Reference Designator: Ethernet
	External Connector Type: RJ-45
	Port Type: Network Port

Handle 0x001A, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Available
	Internal Connector Type: None
	External Reference Designator: USB 1
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x001B, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Available
	Internal Connector Type: None
	External Reference Designator: USB 2
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x001C, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Available
	Internal Connector Type: None
	External Reference Designator: UltraPort(TM)
	External Connector Type: Other
	Port Type: USB

Handle 0x001D, DMI type 9, 13 bytes
System Slot Information
	Designation: CardBus Slot 1
	Type: 32-bit PC Card (PCMCIA)
	Current Usage: Available
	Length: Other
	ID: Adapter 0, Socket 0
	Characteristics:
		5.0 V is provided
		3.3 V is provided
		PC Card-16 is supported
		Cardbus is supported
		Zoom Video is supported
		Modem ring resume is supported
		PME signal is supported
		Hot-plug devices are supported

Handle 0x001E, DMI type 9, 13 bytes
System Slot Information
	Designation: CardBus Slot 2
	Type: 32-bit PC Card (PCMCIA)
	Current Usage: Available
	Length: Other
	ID: Adapter 1, Socket 0
	Characteristics:
		5.0 V is provided
		3.3 V is provided
		PC Card-16 is supported
		Cardbus is supported
		Zoom Video is supported
		Modem ring resume is supported
		PME signal is supported
		Hot-plug devices are supported

Handle 0x001F, DMI type 126, 13 bytes
Inactive

Handle 0x0020, DMI type 126, 13 bytes
Inactive

Handle 0x0021, DMI type 9, 13 bytes
System Slot Information
	Designation: Mini-PCI Slot 1
	Type: 32-bit PCI
	Current Usage: Available
	Length: Other
	ID: 1
	Characteristics:
		5.0 V is provided
		3.3 V is provided
		PME signal is supported
		SMBus signal is supported

Handle 0x0022, DMI type 126, 13 bytes
Inactive

Handle 0x0023, DMI type 10, 6 bytes
On Board Device Information
	Type: Other
	Status: Disabled
	Description: IBM Embedded Security hardware

Handle 0x0024, DMI type 13, 22 bytes
BIOS Language Information
	Language Description Format: Abbreviated
	Installable Languages: 1
		enUS
	Currently Installed Language: enUS

Handle 0x0025, DMI type 15, 25 bytes
System Event Log
	Area Length: 32 bytes
	Header Start Offset: 0x0000
	Header Length: 16 bytes
	Data Start Offset: 0x0010
	Access Method: General-purpose non-volatile data functions
	Access Address: 0x0000
	Status: Invalid, Not Full
	Change Token: 0x00000000
	Header Format: Type 1
	Supported Log Type Descriptors: 1
	Descriptor 1: POST error
	Data Format 1: POST results bitmap

Handle 0x0026, DMI type 16, 15 bytes
Physical Memory Array
	Location: System Board Or Motherboard
	Use: System Memory
	Error Correction Type: None
	Maximum Capacity: 512 MB
	Error Information Handle: Not Provided
	Number Of Devices: 2

Handle 0x0027, DMI type 17, 27 bytes
Memory Device
	Array Handle: 0x0026
	Error Information Handle: No Error
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 512 MB
	Form Factor: SODIMM
	Set: None
	Locator: DIMM 1
	Bank Locator: Bank 0/1
	Type: SDRAM
	Type Detail: Synchronous
	Speed: Unknown
	Manufacturer: Not Specified
	Serial Number: xxx xxxxxxxxx
	Asset Tag: Not Specified
	Part Number: Not Specified

Handle 0x0028, DMI type 17, 27 bytes
Memory Device
	Array Handle: 0x0026
	Error Information Handle: No Error
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 512 MB
	Form Factor: SODIMM
	Set: None
	Locator: DIMM 2
	Bank Locator: Bank 2/3
	Type: SDRAM
	Type Detail: Synchronous
	Speed: Unknown
	Manufacturer: Not Specified
	Serial Number: xxx xxxxxxxxx
	Asset Tag: Not Specified
	Part Number: Not Specified

Handle 0x0029, DMI type 18, 23 bytes
32-bit Memory Error Information
	Type: OK
	Granularity: Unknown
	Operation: Unknown
	Vendor Syndrome: Unknown
	Memory Array Address: Unknown
	Device Address: Unknown
	Resolution: Unknown

Handle 0x002A, DMI type 19, 15 bytes
Memory Array Mapped Address
	Starting Address: 0x00000000000
	Ending Address: 0x0003FFFFFFF
	Range Size: 1 GB
	Physical Array Handle: 0x0026
	Partition Width: 2

Handle 0x002B, DMI type 20, 19 bytes
Memory Device Mapped Address
	Starting Address: 0x00000000000
	Ending Address: 0x0001FFFFFFF
	Range Size: 512 MB
	Physical Device Handle: 0x0027
	Memory Array Mapped Address Handle: 0x002A
	Partition Row Position: 1

Handle 0x002C, DMI type 20, 19 bytes
Memory Device Mapped Address
	Starting Address: 0x00020000000
	Ending Address: 0x0003FFFFFFF
	Range Size: 512 MB
	Physical Device Handle: 0x0028
	Memory Array Mapped Address Handle: 0x002A
	Partition Row Position: 1

Handle 0x002D, DMI type 21, 7 bytes
Built-in Pointing Device
	Type: Track Point
	Interface: PS/2
	Buttons: 3

Handle 0x002E, DMI type 21, 7 bytes
Built-in Pointing Device
	Type: Touch Pad
	Interface: PS/2
	Buttons: 0

Handle 0x002F, DMI type 24, 5 bytes
Hardware Security
	Power-On Password Status: Disabled
	Keyboard Password Status: Disabled
	Administrator Password Status: Disabled
	Front Panel Reset Status: Unknown

Handle 0x0030, DMI type 32, 11 bytes
System Boot Information
	Status: No errors detected

Handle 0x0031, DMI type 131, 102 bytes
OEM-specific Type
	Header and Data:
		83 66 31 00 01 00 00 00 00 01 72 03 40 00 AE 80
		00 02 00 00 00 00 00 2A 00 40 2A 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 16 00 80 16 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00
	Strings:
		IBMCFGDATA

Handle 0x0032, DMI type 132, 7 bytes
OEM-specific Type
	Header and Data:
		84 07 32 00 01 D8 36

Handle 0x0033, DMI type 126, 5 bytes
Inactive

Handle 0x0034, DMI type 127, 4 bytes
End Of Table

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-686-pae ([email protected]) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt20-1+deb8u3 (2016-01-17)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ff5ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003ff60000-0x000000003ff77fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003ff78000-0x000000003ff79fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003ff80000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: IBM 2681DMJ/2681DMJ, BIOS 1OET61WW (1.27 ) 06/29/2006
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3ff60 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 03FF80000 mask FFFF80000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37200000-0x373fffff]
[    0.000000]  [mem 0x37200000-0x373fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x34000000-0x371fffff]
[    0.000000]  [mem 0x34000000-0x371fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x33ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37400000-0x375fdfff]
[    0.000000]  [mem 0x37400000-0x375fdfff] page 4k
[    0.000000] BRK [0x0179c000, 0x0179cfff] PGTABLE
[    0.000000] BRK [0x0179d000, 0x0179efff] PGTABLE
[    0.000000] BRK [0x0179f000, 0x0179ffff] PGTABLE
[    0.000000] BRK [0x017a0000, 0x017a0fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x363f0000-0x371effff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6D40 000024 (v02 IBM   )
[    0.000000] ACPI: XSDT 0x000000003FF6E9B2 00004C (v01 IBM    TP-1O    00001270  LTP 00000000)
[    0.000000] ACPI: FACP 0x000000003FF6EA00 0000F4 (v03 IBM    TP-1O    00001270 IBM  00000001)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20140424/tbfadt-623)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 0/32 (20140424/tbfadt-623)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20140424/tbfadt-654)
[    0.000000] ACPI: DSDT 0x000000003FF6EBE7 0091F0 (v01 IBM    TP-1O    00001270 MSFT 0100000E)
[    0.000000] ACPI: FACS 0x000000003FF79000 000040
[    0.000000] ACPI: FACS 0x000000003FF79000 000040
[    0.000000] ACPI: SSDT 0x000000003FF6EBB4 000033 (v01 IBM    TP-1O    00001270 MSFT 0100000E)
[    0.000000] ACPI: ECDT 0x000000003FF77DD7 000052 (v01 IBM    TP-1O    00001270 IBM  00000001)
[    0.000000] ACPI: TCPA 0x000000003FF77E29 000032 (v01 IBM    TP-1O    00001270 PTL  00000001)
[    0.000000] ACPI: BOOT 0x000000003FF77FD8 000028 (v01 IBM    TP-1O    00001270  LTP 00000001)
[    0.000000] 137MB HIGHMEM available.
[    0.000000] 885MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 375fe000
[    0.000000]   low ram: 0 - 375fe000
[    0.000000] BRK [0x017a1000, 0x017a1fff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x375fdfff]
[    0.000000]   HighMem  [mem 0x375fe000-0x3ff5ffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x3ff5ffff]
[    0.000000] On node 0 totalpages: 261886
[    0.000000] free_area_init_node: node 0, pgdat c165d180, node_mem_map f5bf0020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1740 pages used for memmap
[    0.000000]   Normal zone: 222718 pages, LIFO batch:31
[    0.000000]   HighMem zone: 275 pages used for memmap
[    0.000000]   HighMem zone: 35170 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[    0.000000] APIC: disable apic facility
[    0.000000] APIC: switched to apic NOOP
[    0.000000] nr_irqs_gsi: 16
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] e820: [mem 0x40000000-0xff7fffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f75e9000 s34752 r0 d22592 u57344
[    0.000000] pcpu-alloc: s34752 r0 d22592 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260114
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-686-pae root=UUID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000375fe:0003ff60)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 1016260K/1047544K available (4608K kernel code, 522K rwdata, 1452K rodata, 656K init, 460K bss, 31284K reserved, 140680K highmem)
[    0.000000] virtual kernel memory layout:
    fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
    pkmap   : 0xff600000 - 0xff800000   (2048 kB)
    vmalloc : 0xf7dfe000 - 0xff5fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf75fe000   ( 885 MB)
      .init : 0xc1671000 - 0xc1715000   ( 656 kB)
      .data : 0xc148044c - 0xc166fb40   (1981 kB)
      .text : 0xc1000000 - 0xc148044c   (4609 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=f5406000 soft=f5408000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1893.653 MHz processor
[    0.008027] Calibrating delay loop (skipped), value calculated using timer frequency.. 3787.30 BogoMIPS (lpj=7574612)
[    0.008037] pid_max: default: 32768 minimum: 301
[    0.008064] ACPI: Core revision 20140424
[    0.024782] ACPI: All ACPI Tables successfully acquired
[    0.024794] ACPI: setting ELCR to 0200 (from 0800)
[    0.024843] Security Framework initialized
[    0.024868] AppArmor: AppArmor disabled by boot time parameter
[    0.024871] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.024911] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.024917] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.025449] Initializing cgroup subsys memory
[    0.025464] Initializing cgroup subsys devices
[    0.025484] Initializing cgroup subsys freezer
[    0.025492] Initializing cgroup subsys net_cls
[    0.025507] Initializing cgroup subsys blkio
[    0.025518] Initializing cgroup subsys perf_event
[    0.025524] Initializing cgroup subsys net_prio
[    0.025574] CPU0: Hyper-Threading is disabled
[    0.025586] mce: CPU supports 4 MCE banks
[    0.025618] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[    0.043282] Freeing SMP alternatives memory: 20K (c1715000 - c171a000)
[    0.048015] ftrace: allocating 20810 entries in 41 pages
[    0.064234] smpboot: weird, boot CPU (#0) not listed by the BIOS
[    0.064244] smpboot: SMP motherboard not detected
[    0.064247] smpboot: Local APIC not detected. Using dummy APIC emulation.
[    0.064250] smpboot: SMP disabled
[    0.064304] Performance Events: Netburst events, 
[    0.064322] no APIC, boot with the "lapic" boot parameter to force-enable it.
[    0.064326] no hardware sampling interrupt available.
[    0.064332] Netburst P4/Xeon PMU driver.
[    0.064338] ... version:                0
[    0.064340] ... bit width:              40
[    0.064343] ... generic registers:      18
[    0.064345] ... value mask:             000000ffffffffff
[    0.064348] ... max period:             0000007fffffffff
[    0.064350] ... fixed-purpose events:   0
[    0.064353] ... event mask:             000000000003ffff
[    0.068064] x86: Booted up 1 node, 1 CPUs
[    0.068073] smpboot: Total of 1 processors activated (3787.30 BogoMIPS)
[    0.068207] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.068407] devtmpfs: initialized
[    0.068925] PM: Registering ACPI NVS region [mem 0x3ff78000-0x3ff79fff] (8192 bytes)
[    0.071225] pinctrl core: initialized pinctrl subsystem
[    0.071410] NET: Registered protocol family 16
[    0.071687] cpuidle: using governor ladder
[    0.071695] cpuidle: using governor menu
[    0.071818] ACPI: bus type PCI registered
[    0.071824] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.072158] PCI: PCI BIOS revision 2.10 entry at 0xfd936, last bus=5
[    0.072163] PCI: Using configuration type 1 for base access
[    0.074528] ACPI: Added _OSI(Module Device)
[    0.074535] ACPI: Added _OSI(Processor Device)
[    0.074539] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.074542] ACPI: Added _OSI(Processor Aggregator Device)
[    0.076573] ACPI : EC: EC description table is found, configuring boot EC
[    0.085077] ACPI: Interpreter enabled
[    0.085095] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[    0.085105] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.085135] ACPI: (supports S0 S3 S4 S5)
[    0.085139] ACPI: Using PIC for interrupt routing
[    0.085190] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.124072] ACPI: Power Resource [PUBS] (on)
[    0.124236] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[    0.126189] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
[    0.129592] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.132066] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[    0.132296] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[    0.132525] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[    0.132754] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[    0.132930] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.133107] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.133338] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[    0.133577] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.133589] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.133603] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.133668] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.133932] PCI host bridge to bus 0000:00
[    0.133939] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.133944] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.133951] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.133958] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.133965] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.133971] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.133978] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.133984] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.133991] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff]
[    0.134018] pci 0000:00:00.0: [8086:1a30] type 00 class 0x060000
[    0.134035] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xe3ffffff pref]
[    0.134216] pci 0000:00:01.0: [8086:1a31] type 01 class 0x060400
[    0.134425] pci 0000:00:1d.0: [8086:24c2] type 00 class 0x0c0300
[    0.134488] pci 0000:00:1d.0: reg 0x20: [io  0x1800-0x181f]
[    0.134604] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.134707] pci 0000:00:1d.1: [8086:24c4] type 00 class 0x0c0300
[    0.134770] pci 0000:00:1d.1: reg 0x20: [io  0x1820-0x183f]
[    0.134880] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.134989] pci 0000:00:1d.2: [8086:24c7] type 00 class 0x0c0300
[    0.135051] pci 0000:00:1d.2: reg 0x20: [io  0x1840-0x185f]
[    0.135160] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.135283] pci 0000:00:1d.7: [8086:24cd] type 00 class 0x0c0320
[    0.135314] pci 0000:00:1d.7: reg 0x10: [mem 0xd0000000-0xd00003ff]
[    0.135435] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.135588] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060400
[    0.135684] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.135786] pci 0000:00:1f.0: [8086:24cc] type 00 class 0x060100
[    0.135879] pci 0000:00:1f.0: can't claim BAR 13 [io  0x1000-0x107f]: address conflict with ACPI CPU throttle [io  0x1010-0x1015]
[    0.135888] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH4 GPIO
[    0.136037] pci 0000:00:1f.1: [8086:24ca] type 00 class 0x01018a
[    0.136059] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
[    0.136074] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
[    0.136089] pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]
[    0.136103] pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]
[    0.136118] pci 0000:00:1f.1: reg 0x20: [io  0x1860-0x186f]
[    0.136133] pci 0000:00:1f.1: reg 0x24: [mem 0x00000000-0x000003ff]
[    0.136152] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.136156] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.136160] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.136164] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.136301] pci 0000:00:1f.3: [8086:24c3] type 00 class 0x0c0500
[    0.136363] pci 0000:00:1f.3: reg 0x20: [io  0x1880-0x189f]
[    0.136518] pci 0000:00:1f.5: [8086:24c5] type 00 class 0x040100
[    0.136542] pci 0000:00:1f.5: reg 0x10: [io  0x1c00-0x1cff]
[    0.136555] pci 0000:00:1f.5: reg 0x14: [io  0x18c0-0x18ff]
[    0.136569] pci 0000:00:1f.5: reg 0x18: [mem 0xd0000c00-0xd0000dff]
[    0.136583] pci 0000:00:1f.5: reg 0x1c: [mem 0xd0000800-0xd00008ff]
[    0.136646] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[    0.136785] pci 0000:00:1f.6: [8086:24c6] type 00 class 0x070300
[    0.136809] pci 0000:00:1f.6: reg 0x10: [io  0x2400-0x24ff]
[    0.136822] pci 0000:00:1f.6: reg 0x14: [io  0x2000-0x207f]
[    0.136902] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.136971] pci 0000:00:1f.6: System wakeup disabled by ACPI
[    0.137168] pci 0000:01:00.0: [1002:4c57] type 00 class 0x030000
[    0.137193] pci 0000:01:00.0: reg 0x10: [mem 0xe8000000-0xefffffff pref]
[    0.137205] pci 0000:01:00.0: reg 0x14: [io  0x3000-0x30ff]
[    0.137218] pci 0000:01:00.0: reg 0x18: [mem 0xd0100000-0xd010ffff]
[    0.137253] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.137296] pci 0000:01:00.0: supports D1 D2
[    0.137446] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.137454] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.137460] pci 0000:00:01.0:   bridge window [mem 0xd0100000-0xd01fffff]
[    0.137467] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xefffffff pref]
[    0.137590] pci 0000:02:00.0: [104c:ac56] type 02 class 0x060700
[    0.137617] pci 0000:02:00.0: reg 0x10: [mem 0x50000000-0x50000fff]
[    0.137657] pci 0000:02:00.0: supports D1 D2
[    0.137662] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.137812] pci 0000:02:07.0: [104c:8026] type 00 class 0x0c0010
[    0.137839] pci 0000:02:07.0: reg 0x10: [mem 0xd0205000-0xd02057ff]
[    0.137854] pci 0000:02:07.0: reg 0x14: [mem 0xd0200000-0xd0203fff]
[    0.137943] pci 0000:02:07.0: supports D1 D2
[    0.137947] pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot
[    0.138070] pci 0000:02:08.0: [8086:103d] type 00 class 0x020000
[    0.138095] pci 0000:02:08.0: reg 0x10: [mem 0xd0204000-0xd0204fff]
[    0.138110] pci 0000:02:08.0: reg 0x14: [io  0x8000-0x803f]
[    0.138194] pci 0000:02:08.0: supports D1 D2
[    0.138198] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.138348] pci 0000:00:1e.0: PCI bridge to [bus 02-05] (subtractive decode)
[    0.138357] pci 0000:00:1e.0:   bridge window [io  0x4000-0x8fff]
[    0.138365] pci 0000:00:1e.0:   bridge window [mem 0xd0200000-0xdfffffff]
[    0.138372] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xf7ffffff pref]
[    0.138377] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.138384] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.138391] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.138395] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.138402] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.138408] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.138415] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.138421] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
[    0.138514] pci_bus 0000:03: busn_res: can not insert [bus 03-ff] under [bus 02-05] (conflicts with (null) [bus 02-05])
[    0.138525] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 04
[    0.138547] pci_bus 0000:00: on NUMA node 0
[    0.140688] ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.140986] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.140992] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.140996] vgaarb: loaded
[    0.140999] vgaarb: bridge control possible 0000:01:00.0
[    0.141145] PCI: Using ACPI for IRQ routing
[    0.141243] PCI: pci_cache_line_size set to 64 bytes
[    0.141321] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.141326] e820: reserve RAM buffer [mem 0x3ff60000-0x3fffffff]
[    0.141729] Switched to clocksource pit
[    0.155216] pnp: PnP ACPI init
[    0.155252] ACPI: bus type PNP registered
[    0.156330] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.156338] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[    0.156344] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[    0.156349] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
[    0.156354] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
[    0.156360] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[    0.156366] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[    0.156371] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[    0.156376] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[    0.156382] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.156387] system 00:00: [mem 0x00100000-0x3fffffff] could not be reserved
[    0.156393] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.156401] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.156556] system 00:01: [io  0x1000-0x107f] could not be reserved
[    0.156562] system 00:01: [io  0x1180-0x11bf] has been reserved
[    0.156567] system 00:01: [io  0x1600-0x167f] has been reserved
[    0.156573] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.156664] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.156737] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.156809] pnp 00:04: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
[    0.156872] pnp 00:05: [dma 2]
[    0.156951] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.157135] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (disabled)
[    0.157447] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.157659] pnp 00:08: Plug and Play ACPI device, IDs IBM0071 PNP0511 (disabled)
[    0.158679] pnp: PnP ACPI: found 9 devices
[    0.158684] ACPI: bus type PNP unregistered
[    0.158696] PnPBIOS: Disabled by ACPI PNP
[    0.197629] Switched to clocksource acpi_pm
[    0.197689] pci 0000:00:1f.0: BAR 13: [io  0x1000-0x107f] has bogus alignment
[    0.197714] pci 0000:00:1f.1: BAR 5: assigned [mem 0x40000000-0x400003ff]
[    0.197729] pci 0000:01:00.0: BAR 6: assigned [mem 0xd0120000-0xd013ffff pref]
[    0.197736] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.197742] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.197749] pci 0000:00:01.0:   bridge window [mem 0xd0100000-0xd01fffff]
[    0.197756] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xefffffff pref]
[    0.197770] pci 0000:02:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.197776] pci 0000:02:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[    0.197781] pci 0000:02:00.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.197786] pci 0000:02:00.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.197792] pci 0000:02:00.0: BAR 15: assigned [mem 0xf0000000-0xf3ffffff pref]
[    0.197799] pci 0000:02:00.0: BAR 16: assigned [mem 0xd4000000-0xd7ffffff]
[    0.197804] pci 0000:02:00.0: BAR 13: assigned [io  0x4000-0x40ff]
[    0.197809] pci 0000:02:00.0: BAR 14: assigned [io  0x4400-0x44ff]
[    0.197815] pci 0000:02:00.0: CardBus bridge to [bus 03-04]
[    0.197820] pci 0000:02:00.0:   bridge window [io  0x4000-0x40ff]
[    0.197827] pci 0000:02:00.0:   bridge window [io  0x4400-0x44ff]
[    0.197835] pci 0000:02:00.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
[    0.197842] pci 0000:02:00.0:   bridge window [mem 0xd4000000-0xd7ffffff]
[    0.197850] pci 0000:00:1e.0: PCI bridge to [bus 02-05]
[    0.197856] pci 0000:00:1e.0:   bridge window [io  0x4000-0x8fff]
[    0.197865] pci 0000:00:1e.0:   bridge window [mem 0xd0200000-0xdfffffff]
[    0.197873] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xf7ffffff pref]
[    0.197885] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.197890] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.197895] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.197900] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.197905] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.197909] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.197914] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    0.197919] pci_bus 0000:00: resource 11 [mem 0x40000000-0xfebfffff]
[    0.197925] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.197929] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd01fffff]
[    0.197934] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xefffffff pref]
[    0.197940] pci_bus 0000:02: resource 0 [io  0x4000-0x8fff]
[    0.197944] pci_bus 0000:02: resource 1 [mem 0xd0200000-0xdfffffff]
[    0.197949] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf7ffffff pref]
[    0.197954] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7]
[    0.197959] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff]
[    0.197963] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[    0.197968] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.197973] pci_bus 0000:02: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.197977] pci_bus 0000:02: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.197982] pci_bus 0000:02: resource 10 [mem 0x000dc000-0x000dffff]
[    0.197987] pci_bus 0000:02: resource 11 [mem 0x40000000-0xfebfffff]
[    0.197992] pci_bus 0000:03: resource 0 [io  0x4000-0x40ff]
[    0.197997] pci_bus 0000:03: resource 1 [io  0x4400-0x44ff]
[    0.198002] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf3ffffff pref]
[    0.198006] pci_bus 0000:03: resource 3 [mem 0xd4000000-0xd7ffffff]
[    0.198070] NET: Registered protocol family 2
[    0.198582] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.198626] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.198696] TCP: Hash tables configured (established 8192 bind 8192)
[    0.198802] TCP: reno registered
[    0.198809] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.198826] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.198937] NET: Registered protocol family 1
[    0.199374] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[    0.199380] PCI: setting IRQ 11 as level-triggered
[    0.199727] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    0.200129] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    0.200469] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[    0.200579] pci 0000:01:00.0: Video device with shadowed ROM
[    0.200605] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[    0.200614] PCI: CLS 32 bytes, default 64
[    0.200762] Unpacking initramfs...
[    0.831690] Freeing initrd memory: 14336K (f63f0000 - f71f0000)
[    0.831883] Simple Boot Flag at 0x35 set to 0x1
[    0.832151] microcode: CPU0 sig=0xf27, pf=0x8, revision=0x39
[    0.832305] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[    0.832873] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.832946] audit: initializing netlink subsys (disabled)
[    0.832998] audit: type=2000 audit(1455335813.829:1): initialized
[    0.833619] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.833654] zbud: loaded
[    0.833798] VFS: Disk quotas dquot_6.5.2
[    0.833827] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.833960] msgmni has been set to 1738
[    0.834602] alg: No test for stdrng (krng)
[    0.834651] bounce: pool size: 64 pages
[    0.834682] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.834771] io scheduler noop registered
[    0.834778] io scheduler deadline registered
[    0.834843] io scheduler cfq registered (default)
[    0.835104] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.835151] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.835269] GHES: HEST is not enabled!
[    0.835323] isapnp: Scanning for PnP cards...
[    1.188675] isapnp: No Plug & Play device found
[    1.188853] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.189015] serial 00:06: [io  0x03f8-0x03ff]
[    1.189071] serial 00:06: [irq 4]
[    1.190742] serial 00:06: activated
[    1.190824] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 921600) is a NS16550A
[    1.191834] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[    1.192119] Linux agpgart interface v0.103
[    1.192344] agpgart-intel 0000:00:00.0: Intel i845 Chipset
[    1.196390] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[    1.196739] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    1.198202] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.198219] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.198522] mousedev: PS/2 mouse device common for all mice
[    1.198634] rtc_cmos 00:02: RTC can wake from S4
[    1.198952] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.198980] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
[    1.199037] ledtrig-cpu: registered to indicate activity on CPUs
[    1.199270] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.200305] TCP: cubic registered
[    1.200335] NET: Registered protocol family 10
[    1.200798] mip6: Mobile IPv6
[    1.200806] NET: Registered protocol family 17
[    1.200818] mpls_gso: MPLS GSO support
[    1.201155] Using IPI No-Shortcut mode
[    1.201404] registered taskstats version 1
[    1.202031] rtc_cmos 00:02: setting system clock to 2016-02-13 03:56:54 UTC (1455335814)
[    1.202181] PM: Hibernation image not present or could not be loaded.
[    1.203325] Freeing unused kernel memory: 656K (c1671000 - c1715000)
[    1.203404] Write protecting the kernel text: 4612k
[    1.203469] Write protecting the kernel read-only data: 1456k
[    1.232414] systemd-udevd[54]: starting version 215
[    1.233217] random: systemd-udevd urandom read with 7 bits of entropy available
[    1.286053] ACPI: bus type USB registered
[    1.286129] usbcore: registered new interface driver usbfs
[    1.286159] usbcore: registered new interface driver hub
[    1.295657] usbcore: registered new device driver usb
[    1.297132] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.297984] uhci_hcd: USB Universal Host Controller Interface driver
[    1.298153] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.298170] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    1.298186] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.298219] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
[    1.298857] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    1.298865] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.298871] usb usb1: Product: UHCI Host Controller
[    1.298875] usb usb1: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[    1.298879] usb usb1: SerialNumber: 0000:00:1d.0
[    1.299265] hub 1-0:1.0: USB hub found
[    1.299282] hub 1-0:1.0: 2 ports detected
[    1.301316] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.301337] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    1.301352] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.301384] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
[    1.302709] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.302718] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.302722] usb usb2: Product: UHCI Host Controller
[    1.302726] usb usb2: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[    1.302730] usb usb2: SerialNumber: 0000:00:1d.1
[    1.303062] hub 2-0:1.0: USB hub found
[    1.303536] hub 2-0:1.0: 2 ports detected
[    1.305403] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.305424] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    1.305443] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.305475] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
[    1.307507] Floppy drive(s): fd0 is 1.44M
[    1.307760] ehci-pci: EHCI PCI platform driver
[    1.308675] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.308683] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.308689] usb usb3: Product: UHCI Host Controller
[    1.308694] usb usb3: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[    1.308697] usb usb3: SerialNumber: 0000:00:1d.2
[    1.309324] hub 3-0:1.0: USB hub found
[    1.310507] hub 3-0:1.0: 2 ports detected
[    1.313174] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.313200] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
[    1.313229] ehci-pci 0000:00:1d.7: debug port 1
[    1.317165] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    1.323494] FDC 0 is a National Semiconductor PC87306
[    1.325875] ehci-pci 0000:00:1d.7: irq 11, io mem 0xd0000000
[    1.336249] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.336385] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    1.336391] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.336397] usb usb4: Product: EHCI Host Controller
[    1.336401] usb usb4: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[    1.336405] usb usb4: SerialNumber: 0000:00:1d.7
[    1.336789] hub 4-0:1.0: USB hub found
[    1.336807] hub 4-0:1.0: 6 ports detected
[    1.339378] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    1.339387] e100: Copyright(c) 1999-2006 Intel Corporation
[    1.339843] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[    1.364273] hub 1-0:1.0: USB hub found
[    1.364297] hub 1-0:1.0: 2 ports detected
[    1.364901] e100 0000:02:08.0 eth0: addr 0xd0204000, irq 11, MAC addr xx:xx:xx:xx:xx:xx
[    1.375904] SCSI subsystem initialized
[    1.376251] thermal LNXTHERM:00: registered as thermal_zone0
[    1.376257] ACPI: Thermal Zone [THM0] (37 C)
[    1.388260] hub 2-0:1.0: USB hub found
[    1.388285] hub 2-0:1.0: 2 ports detected
[    1.402605] libata version 3.00 loaded.
[    1.412245] hub 3-0:1.0: USB hub found
[    1.412271] hub 3-0:1.0: 2 ports detected
[    1.412828] ata_piix 0000:00:1f.1: version 2.13
[    1.412853] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[    1.422492] scsi0 : ata_piix
[    1.429801] scsi1 : ata_piix
[    1.429978] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
[    1.429983] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
[    1.432124] firewire_ohci 0000:02:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    1.592453] ata1.00: ATA-5: TOSHIBA MK4021GAS, GA224C, max UDMA/100
[    1.592463] ata1.00: 78140160 sectors, multi 16: LBA 
[    1.596321] ata2.00: ATAPI: CD-224E, 2.9A, max UDMA/33
[    1.600312] ata1.00: configured for UDMA/100
[    1.600530] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK4021GA 4C   PQ: 0 ANSI: 5
[    1.612217] ata2.00: configured for UDMA/33
[    1.614674] scsi 1:0:0:0: CD-ROM            TEAC     CD-224E          2.9A PQ: 0 ANSI: 5
[    1.627864] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    1.627982] sd 0:0:0:0: [sda] Write Protect is off
[    1.627988] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.628132] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.633696] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[    1.633706] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.634039] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.637436] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.637611] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.717219]  sda: sda1 sda2
[    1.718219] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.828105] tsc: Refined TSC clocksource calibration: 1893.854 MHz
[    1.932255] firewire_core 0000:02:07.0: created device fw0: GUID 00061b002004719e, S400
[    2.119108] PM: Starting manual resume from disk
[    2.119122] PM: Hibernation image partition 8:2 present
[    2.119125] PM: Looking for hibernation image.
[    2.119544] PM: Image not found (code -22)
[    2.119549] PM: Hibernation image not present or could not be loaded.
[    2.185000] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    2.322184] XFS (sda1): Mounting V4 Filesystem
[    2.717993] XFS (sda1): Ending clean mount
[    2.828999] Switched to clocksource tsc
[    3.846395] random: nonblocking pool is initialized
[    7.033076] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    8.163619] systemd-udevd[162]: starting version 215
[    9.901904] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    9.902191] ACPI: Lid Switch [LID]
[    9.902335] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[    9.902345] ACPI: Sleep Button [SLPB]
[    9.902489] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    9.902496] ACPI: Power Button [PWRF]
[    9.948621] ACPI: Battery Slot [BAT0] (battery present)
[    9.949732] ACPI: AC Adapter [AC] (on-line)
[   10.010864] NET: Registered protocol family 23
[   10.122850] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[   10.123170] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:02/LNXVIDEO:00/input/input5
[   10.320490] tsc: Marking TSC unstable due to TSC halts in idle
[   10.320510] ACPI: acpi_idle registered with cpuidle
[   10.323466] Switched to clocksource acpi_pm
[   10.403446] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.426775] parport_pc 00:07: reported by Plug and Play ACPI
[   10.426830] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[   10.657067] intel_rng: FWH not detected
[   10.855734] nsc-ircc 00:08: [io  0x02f8-0x02ff]
[   10.855802] nsc-ircc 00:08: [irq 3]
[   10.855810] nsc-ircc 00:08: [dma 1]
[   10.859808] nsc-ircc 00:08: activated
[   10.860123] nsc-ircc, chip->init
[   10.860136] nsc-ircc, Found chip at base=0x02e
[   10.860163] nsc-ircc, driver loaded (Dag Brattli)
[   10.861333] IrDA: Registered device irda0
[   10.861341] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
[   11.047028] yenta_cardbus 0000:02:00.0: CardBus bridge found [1014:0528]
[   11.047057] yenta_cardbus 0000:02:00.0: Using INTVAL to route CSC interrupts to PCI
[   11.047063] yenta_cardbus 0000:02:00.0: Routing CardBus interrupts to PCI
[   11.047071] yenta_cardbus 0000:02:00.0: TI: mfunc 0x01d11002, devctl 0x64
[   11.276500] yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x0438, PCI irq 11
[   11.276511] yenta_cardbus 0000:02:00.0: Socket status: 30000007
[   11.276524] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge window: [io  0x4000-0x8fff]
[   11.276530] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x8fff:
[   11.277465]  excluding 0x4000-0x40ff 0x4400-0x44ff 0x8000-0x803f
[   11.297323] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge window: [mem 0xd0200000-0xdfffffff]
[   11.297332] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0200000-0xdfffffff:
[   11.297339]  excluding 0xd0200000-0xd09fffff 0xd3a00000-0xd81fffff 0xdfa00000-0xe01fffff
[   11.297380] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge window: [mem 0xf0000000-0xf7ffffff pref]
[   11.297386] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0000000-0xf7ffffff:
[   11.297401]  excluding 0xf0000000-0xf7ffffff
[   12.095930] Non-volatile memory driver v1.3
[   12.823710] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[   12.823722] thinkpad_acpi: http://ibm-acpi.sf.net/
[   12.823727] thinkpad_acpi: ThinkPad BIOS 1OET61WW (1.27 ), EC unknown
[   12.830651] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[   12.843349] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[   12.848513] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[   12.941121] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   12.994843] ppdev: user-space parallel port driver
[   13.150049] [drm] Initialized drm 1.1.0 20060810
[   13.605822] [drm] radeon kernel modesetting enabled.
[   13.607270] [drm] initializing kernel modesetting (RV200 0x1002:0x4C57 0x1014:0x0527).
[   13.607310] [drm] register mmio base: 0xD0100000
[   13.607315] [drm] register mmio size: 65536
[   13.607584] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[   13.607611] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[   13.607670] radeon 0000:01:00.0: putting AGP V2 device into 4x mode
[   13.607704] radeon 0000:01:00.0: GTT: 64M 0xE0000000 - 0xE3FFFFFF
[   13.607721] radeon 0000:01:00.0: VRAM: 128M 0x00000000E8000000 - 0x00000000EFFFFFFF (32M used)
[   13.607747] [drm] Detected VRAM RAM=128M, BAR=128M
[   13.607754] [drm] RAM width 64bits DDR
[   13.607934] [TTM] Zone  kernel: Available graphics memory: 445296 kiB
[   13.607940] [TTM] Zone highmem: Available graphics memory: 515636 kiB
[   13.607945] [TTM] Initializing pool allocator
[   13.607964] [TTM] Initializing DMA pool allocator
[   13.612113] [drm] radeon: 32M of VRAM memory ready
[   13.612125] [drm] radeon: 64M of GTT memory ready.
[   13.612190] [drm] radeon: power management initialized
[   13.614684] radeon 0000:01:00.0: WB disabled
[   13.614705] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000e0000000 and cpu addr 0xf7e60000
[   13.614715] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   13.614720] [drm] Driver supports precise vblank timestamp query.
[   13.614752] [drm] radeon: irq initialized.
[   13.614788] [drm] Loading R100 Microcode
[   13.628105] snd_intel8x0 0000:00:1f.5: intel8x0_measure_ac97_clock: measured 55115 usecs (2655 samples)
[   13.628119] snd_intel8x0 0000:00:1f.5: clocking to 48000
[   13.727128] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[   13.727997]  excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x377
[   13.729308] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[   13.729635]  excluding 0x3f0-0x3ff 0x4d0-0x4d7
[   13.729972] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[   13.730476]  clean.
[   13.730522] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[   13.731079]  clean.
[   13.731138] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[   13.731160]  excluding 0xc0000-0xcffff 0xe0000-0xfffff
[   13.731242] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[   13.731291]  clean.
[   13.731337] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[   13.731383]  clean.
[   13.731429] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[   13.732068]  clean.
[   14.141404] iTCO_vendor_support: vendor-support=0
[   14.203408] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   14.203513] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
[   14.204534] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   14.373224] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/R100_cp.bin
[   14.373772] [drm] radeon: ring at 0x00000000E0001000
[   14.373808] [drm] ring test succeeded in 1 usecs
[   14.374165] [drm] ib test succeeded in 0 usecs
[   14.375801] [drm] Panel ID String: 1024x768                
[   14.375810] [drm] Panel Size 1024x768
[   14.375955] [drm] No TV DAC info found in BIOS
[   14.396113] [drm] radeon legacy LVDS backlight initialized
[   14.396121] [drm] Radeon Display Connectors
[   14.396126] [drm] Connector 0:
[   14.396130] [drm]   VGA-1
[   14.396137] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[   14.396140] [drm]   Encoders:
[   14.396145] [drm]     CRT1: INTERNAL_DAC1
[   14.396149] [drm] Connector 1:
[   14.396153] [drm]   LVDS-1
[   14.396156] [drm]   Encoders:
[   14.396160] [drm]     LCD1: INTERNAL_LVDS
[   14.396164] [drm] Connector 2:
[   14.396168] [drm]   SVIDEO-1
[   14.396171] [drm]   Encoders:
[   14.396175] [drm]     TV1: INTERNAL_DAC2
[   14.434030] [drm] fb mappable at 0xE8040000
[   14.434040] [drm] vram apper at 0xE8000000
[   14.434044] [drm] size 786432
[   14.434048] [drm] fb depth is 8
[   14.434052] [drm]    pitch is 1024
[   14.434480] fbcon: radeondrmfb (fb0) is primary device
[   14.474864] Console: switching to colour frame buffer device 128x48
[   14.485348] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   14.485352] radeon 0000:01:00.0: registered panic notifier
[   14.487758] [drm] Initialized radeon 2.39.0 20080528 for 0000:01:00.0 on minor 0
[   14.619262] Adding 984060k swap on /dev/sda2.  Priority:-1 extents:1 across:984060k FS
[   14.760639] psmouse serio1: synaptics: Touchpad model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0/0x0, board id: 0, fw id: 4797594
[   14.760664] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[   14.802775] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[   15.036913] systemd-journald[158]: Received request to flush runtime journal from PID 1
[   16.257469] ip_tables: (C) 2000-2006 Netfilter Core Team
[   16.801792] nf_conntrack version 0.5.0 (16113 buckets, 64452 max)
[   17.380420] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   17.673087] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.676233] e100 0000:02:08.0 eth0: NIC Link is Up 100 Mbps Full Duplex
[   17.677148] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   17.955888] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[   19.325444] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[   19.537559] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9