Created
March 26, 2014 09:08
-
-
Save tomari/9779322 to your computer and use it in GitHub Desktop.
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| processor : 0 | |
| vendor_id : GenuineIntel | |
| cpu family : 6 | |
| model : 42 | |
| model name : Intel(R) Core(TM) i7-2700K CPU @ 3.50GHz | |
| stepping : 7 | |
| cpu MHz : 1600.000 | |
| cache size : 8192 KB | |
| physical id : 0 | |
| siblings : 8 | |
| core id : 0 | |
| cpu cores : 4 | |
| apicid : 0 | |
| initial apicid : 0 | |
| fpu : yes | |
| fpu_exception : yes | |
| cpuid level : 13 | |
| wp : yes | |
| flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dts tpr_shadow vnmi flexpriority ept vpid | |
| bogomips : 6984.20 | |
| clflush size : 64 | |
| cache_alignment : 64 | |
| address sizes : 36 bits physical, 48 bits virtual | |
| power management: | |
| processor : 1 | |
| vendor_id : GenuineIntel | |
| cpu family : 6 | |
| model : 42 | |
| model name : Intel(R) Core(TM) i7-2700K CPU @ 3.50GHz | |
| stepping : 7 | |
| cpu MHz : 1600.000 | |
| cache size : 8192 KB | |
| physical id : 0 | |
| siblings : 8 | |
| core id : 1 | |
| cpu cores : 4 | |
| apicid : 2 | |
| initial apicid : 2 | |
| fpu : yes | |
| fpu_exception : yes | |
| cpuid level : 13 | |
| wp : yes | |
| flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dts tpr_shadow vnmi flexpriority ept vpid | |
| bogomips : 6984.20 | |
| clflush size : 64 | |
| cache_alignment : 64 | |
| address sizes : 36 bits physical, 48 bits virtual | |
| power management: | |
| processor : 2 | |
| vendor_id : GenuineIntel | |
| cpu family : 6 | |
| model : 42 | |
| model name : Intel(R) Core(TM) i7-2700K CPU @ 3.50GHz | |
| stepping : 7 | |
| cpu MHz : 1600.000 | |
| cache size : 8192 KB | |
| physical id : 0 | |
| siblings : 8 | |
| core id : 2 | |
| cpu cores : 4 | |
| apicid : 4 | |
| initial apicid : 4 | |
| fpu : yes | |
| fpu_exception : yes | |
| cpuid level : 13 | |
| wp : yes | |
| flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dts tpr_shadow vnmi flexpriority ept vpid | |
| bogomips : 6984.20 | |
| clflush size : 64 | |
| cache_alignment : 64 | |
| address sizes : 36 bits physical, 48 bits virtual | |
| power management: | |
| processor : 3 | |
| vendor_id : GenuineIntel | |
| cpu family : 6 | |
| model : 42 | |
| model name : Intel(R) Core(TM) i7-2700K CPU @ 3.50GHz | |
| stepping : 7 | |
| cpu MHz : 1600.000 | |
| cache size : 8192 KB | |
| physical id : 0 | |
| siblings : 8 | |
| core id : 3 | |
| cpu cores : 4 | |
| apicid : 6 | |
| initial apicid : 6 | |
| fpu : yes | |
| fpu_exception : yes | |
| cpuid level : 13 | |
| wp : yes | |
| flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dts tpr_shadow vnmi flexpriority ept vpid | |
| bogomips : 6984.20 | |
| clflush size : 64 | |
| cache_alignment : 64 | |
| address sizes : 36 bits physical, 48 bits virtual | |
| power management: | |
| processor : 4 | |
| vendor_id : GenuineIntel | |
| cpu family : 6 | |
| model : 42 | |
| model name : Intel(R) Core(TM) i7-2700K CPU @ 3.50GHz | |
| stepping : 7 | |
| cpu MHz : 1600.000 | |
| cache size : 8192 KB | |
| physical id : 0 | |
| siblings : 8 | |
| core id : 0 | |
| cpu cores : 4 | |
| apicid : 1 | |
| initial apicid : 1 | |
| fpu : yes | |
| fpu_exception : yes | |
| cpuid level : 13 | |
| wp : yes | |
| flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dts tpr_shadow vnmi flexpriority ept vpid | |
| bogomips : 6984.20 | |
| clflush size : 64 | |
| cache_alignment : 64 | |
| address sizes : 36 bits physical, 48 bits virtual | |
| power management: | |
| processor : 5 | |
| vendor_id : GenuineIntel | |
| cpu family : 6 | |
| model : 42 | |
| model name : Intel(R) Core(TM) i7-2700K CPU @ 3.50GHz | |
| stepping : 7 | |
| cpu MHz : 1600.000 | |
| cache size : 8192 KB | |
| physical id : 0 | |
| siblings : 8 | |
| core id : 1 | |
| cpu cores : 4 | |
| apicid : 3 | |
| initial apicid : 3 | |
| fpu : yes | |
| fpu_exception : yes | |
| cpuid level : 13 | |
| wp : yes | |
| flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dts tpr_shadow vnmi flexpriority ept vpid | |
| bogomips : 6984.20 | |
| clflush size : 64 | |
| cache_alignment : 64 | |
| address sizes : 36 bits physical, 48 bits virtual | |
| power management: | |
| processor : 6 | |
| vendor_id : GenuineIntel | |
| cpu family : 6 | |
| model : 42 | |
| model name : Intel(R) Core(TM) i7-2700K CPU @ 3.50GHz | |
| stepping : 7 | |
| cpu MHz : 1600.000 | |
| cache size : 8192 KB | |
| physical id : 0 | |
| siblings : 8 | |
| core id : 2 | |
| cpu cores : 4 | |
| apicid : 5 | |
| initial apicid : 5 | |
| fpu : yes | |
| fpu_exception : yes | |
| cpuid level : 13 | |
| wp : yes | |
| flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dts tpr_shadow vnmi flexpriority ept vpid | |
| bogomips : 6984.20 | |
| clflush size : 64 | |
| cache_alignment : 64 | |
| address sizes : 36 bits physical, 48 bits virtual | |
| power management: | |
| processor : 7 | |
| vendor_id : GenuineIntel | |
| cpu family : 6 | |
| model : 42 | |
| model name : Intel(R) Core(TM) i7-2700K CPU @ 3.50GHz | |
| stepping : 7 | |
| cpu MHz : 1600.000 | |
| cache size : 8192 KB | |
| physical id : 0 | |
| siblings : 8 | |
| core id : 3 | |
| cpu cores : 4 | |
| apicid : 7 | |
| initial apicid : 7 | |
| fpu : yes | |
| fpu_exception : yes | |
| cpuid level : 13 | |
| wp : yes | |
| flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dts tpr_shadow vnmi flexpriority ept vpid | |
| bogomips : 6984.20 | |
| clflush size : 64 | |
| cache_alignment : 64 | |
| address sizes : 36 bits physical, 48 bits virtual | |
| power management: | |
| -[0000:00]-+-00.0 Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0100] | |
| +-01.0-[01]--+-00.0 Advanced Micro Devices, Inc. [AMD/ATI] Juniper XT [Radeon HD 6770] [1002:68ba] | |
| | \-00.1 Advanced Micro Devices, Inc. [AMD/ATI] Juniper HDMI Audio [Radeon HD 5700 Series] [1002:aa58] | |
| +-16.0 Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] | |
| +-1a.0 Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] | |
| +-1b.0 Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] | |
| +-1c.0-[02]-- | |
| +-1c.4-[03-04]----00.0-[04]-- | |
| +-1c.5-[05]----00.0 Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] | |
| +-1c.6-[06]----00.0 Etron Technology, Inc. EJ168 USB 3.0 Host Controller [1b6f:7023] | |
| +-1d.0 Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] | |
| +-1f.0 Intel Corporation Z68 Express Chipset Family LPC Controller [8086:1c44] | |
| +-1f.2 Intel Corporation 82801 SATA Controller [RAID mode] [8086:2822] | |
| \-1f.3 Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] | |
| # dmidecode 2.12 | |
| # SMBIOS entry point at 0x000f0480 | |
| SMBIOS 2.7 present. | |
| 28 structures occupying 1653 bytes. | |
| Table at 0x000EF370. | |
| Handle 0x0000, DMI type 0, 24 bytes | |
| BIOS Information | |
| Vendor: American Megatrends Inc. | |
| Version: P2.10 | |
| Release Date: 05/07/2012 | |
| Address: 0xF0000 | |
| Runtime Size: 64 kB | |
| ROM Size: 8192 kB | |
| Characteristics: | |
| PCI is supported | |
| BIOS is upgradeable | |
| BIOS shadowing is allowed | |
| Boot from CD is supported | |
| Selectable boot is supported | |
| BIOS ROM is socketed | |
| EDD is supported | |
| 5.25"/1.2 MB floppy services are supported (int 13h) | |
| 3.5"/720 kB floppy services are supported (int 13h) | |
| 3.5"/2.88 MB floppy services are supported (int 13h) | |
| Print screen service is supported (int 5h) | |
| 8042 keyboard services are supported (int 9h) | |
| Serial services are supported (int 14h) | |
| Printer services are supported (int 17h) | |
| ACPI is supported | |
| USB legacy is supported | |
| BIOS boot specification is supported | |
| Targeted content distribution is supported | |
| UEFI is supported | |
| BIOS Revision: 4.6 | |
| Handle 0x0001, DMI type 1, 27 bytes | |
| System Information | |
| Manufacturer: To Be Filled By O.E.M. | |
| Product Name: To Be Filled By O.E.M. | |
| Version: To Be Filled By O.E.M. | |
| Serial Number: To Be Filled By O.E.M. | |
| UUID: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx | |
| Wake-up Type: Power Switch | |
| SKU Number: To Be Filled By O.E.M. | |
| Family: To Be Filled By O.E.M. | |
| Handle 0x0002, DMI type 2, 15 bytes | |
| Base Board Information | |
| Manufacturer: ASRock | |
| Product Name: Z68 Pro3 | |
| Version: | |
| Serial Number: | |
| Asset Tag: | |
| Features: | |
| Board is a hosting board | |
| Board is replaceable | |
| Location In Chassis: | |
| Chassis Handle: 0x0003 | |
| Type: Motherboard | |
| Contained Object Handles: 0 | |
| Handle 0x0003, DMI type 3, 22 bytes | |
| Chassis Information | |
| Manufacturer: To Be Filled By O.E.M. | |
| Type: Desktop | |
| Lock: Not Present | |
| Version: To Be Filled By O.E.M. | |
| Serial Number: To Be Filled By O.E.M. | |
| Asset Tag: To Be Filled By O.E.M. | |
| Boot-up State: Safe | |
| Power Supply State: Safe | |
| Thermal State: Safe | |
| Security Status: None | |
| OEM Information: 0x00000000 | |
| Height: Unspecified | |
| Number Of Power Cords: 1 | |
| Contained Elements: 0 | |
| SKU Number: To be filled by O.E.M. | |
| Handle 0x0004, DMI type 9, 17 bytes | |
| System Slot Information | |
| Designation: PCI1 | |
| Type: 32-bit PCI | |
| Current Usage: Available | |
| Length: Short | |
| ID: 1 | |
| Characteristics: | |
| 3.3 V is provided | |
| Opening is shared | |
| PME signal is supported | |
| Bus Address: ffff:04:00.0 | |
| Handle 0x0005, DMI type 9, 17 bytes | |
| System Slot Information | |
| Designation: PCI2 | |
| Type: 32-bit PCI | |
| Current Usage: Available | |
| Length: Short | |
| ID: 2 | |
| Characteristics: | |
| 3.3 V is provided | |
| Opening is shared | |
| PME signal is supported | |
| Bus Address: ffff:04:01.0 | |
| Handle 0x0006, DMI type 9, 17 bytes | |
| System Slot Information | |
| Designation: PCIE1 | |
| Type: x16 PCI Express | |
| Current Usage: In Use | |
| Length: Long | |
| ID: 17 | |
| Characteristics: | |
| 3.3 V is provided | |
| Opening is shared | |
| PME signal is supported | |
| Bus Address: ffff:01:00.0 | |
| Handle 0x0007, DMI type 9, 17 bytes | |
| System Slot Information | |
| Designation: PCIE2 | |
| Type: x1 PCI Express | |
| Current Usage: Available | |
| Length: Short | |
| ID: 18 | |
| Characteristics: | |
| 3.3 V is provided | |
| Opening is shared | |
| PME signal is supported | |
| Bus Address: ffff:02:00.0 | |
| Handle 0x0008, DMI type 9, 17 bytes | |
| System Slot Information | |
| Designation: PCIE3 | |
| Type: x1 PCI Express | |
| Current Usage: Available | |
| Length: Short | |
| ID: 19 | |
| Characteristics: | |
| 3.3 V is provided | |
| Opening is shared | |
| PME signal is supported | |
| Handle 0x0009, DMI type 9, 17 bytes | |
| System Slot Information | |
| Designation: PCIE4 | |
| Type: x1 PCI Express | |
| Current Usage: Available | |
| Length: Short | |
| ID: 20 | |
| Characteristics: | |
| 3.3 V is provided | |
| Opening is shared | |
| PME signal is supported | |
| Handle 0x000A, DMI type 11, 5 bytes | |
| OEM Strings | |
| String 1: To Be Filled By O.E.M. | |
| Handle 0x000B, DMI type 32, 20 bytes | |
| System Boot Information | |
| Status: No errors detected | |
| Handle 0x000C, DMI type 7, 19 bytes | |
| Cache Information | |
| Socket Designation: CPU Internal L2 | |
| Configuration: Enabled, Not Socketed, Level 2 | |
| Operational Mode: Write Through | |
| Location: Internal | |
| Installed Size: 1024 kB | |
| Maximum Size: 1024 kB | |
| Supported SRAM Types: | |
| Unknown | |
| Installed SRAM Type: Unknown | |
| Speed: Unknown | |
| Error Correction Type: Multi-bit ECC | |
| System Type: Instruction | |
| Associativity: 16-way Set-associative | |
| Handle 0x000D, DMI type 7, 19 bytes | |
| Cache Information | |
| Socket Designation: CPU Internal L1 | |
| Configuration: Enabled, Not Socketed, Level 1 | |
| Operational Mode: Write Through | |
| Location: Internal | |
| Installed Size: 128 kB | |
| Maximum Size: 128 kB | |
| Supported SRAM Types: | |
| Unknown | |
| Installed SRAM Type: Unknown | |
| Speed: Unknown | |
| Error Correction Type: Parity | |
| System Type: Other | |
| Associativity: 16-way Set-associative | |
| Handle 0x000E, DMI type 7, 19 bytes | |
| Cache Information | |
| Socket Designation: CPU Internal L3 | |
| Configuration: Enabled, Not Socketed, Level 3 | |
| Operational Mode: Write Back | |
| Location: Internal | |
| Installed Size: 8192 kB | |
| Maximum Size: 8192 kB | |
| Supported SRAM Types: | |
| Unknown | |
| Installed SRAM Type: Unknown | |
| Speed: Unknown | |
| Error Correction Type: Multi-bit ECC | |
| System Type: Instruction | |
| Associativity: <OUT OF SPEC> | |
| Handle 0x000F, DMI type 16, 23 bytes | |
| Physical Memory Array | |
| Location: System Board Or Motherboard | |
| Use: System Memory | |
| Error Correction Type: None | |
| Maximum Capacity: 32 GB | |
| Error Information Handle: Not Provided | |
| Number Of Devices: 4 | |
| Handle 0x0010, DMI type 4, 42 bytes | |
| Processor Information | |
| Socket Designation: CPUSocket | |
| Type: Central Processor | |
| Family: Core i7 | |
| Manufacturer: Intel(R) Corporation | |
| ID: A7 06 02 00 FF FB EB BF | |
| Signature: Type 0, Family 6, Model 42, Stepping 7 | |
| Flags: | |
| FPU (Floating-point unit on-chip) | |
| VME (Virtual mode extension) | |
| DE (Debugging extension) | |
| PSE (Page size extension) | |
| TSC (Time stamp counter) | |
| MSR (Model specific registers) | |
| PAE (Physical address extension) | |
| MCE (Machine check exception) | |
| CX8 (CMPXCHG8 instruction supported) | |
| APIC (On-chip APIC hardware supported) | |
| SEP (Fast system call) | |
| MTRR (Memory type range registers) | |
| PGE (Page global enable) | |
| MCA (Machine check architecture) | |
| CMOV (Conditional move instruction supported) | |
| PAT (Page attribute table) | |
| PSE-36 (36-bit page size extension) | |
| CLFSH (CLFLUSH instruction supported) | |
| DS (Debug store) | |
| ACPI (ACPI supported) | |
| MMX (MMX technology supported) | |
| FXSR (FXSAVE and FXSTOR instructions supported) | |
| SSE (Streaming SIMD extensions) | |
| SSE2 (Streaming SIMD extensions 2) | |
| SS (Self-snoop) | |
| HTT (Multi-threading) | |
| TM (Thermal monitor supported) | |
| PBE (Pending break enabled) | |
| Version: Intel(R) Core(TM) i7-2700K CPU @ 3.50GHz | |
| Voltage: 1.2 V | |
| External Clock: 100 MHz | |
| Max Speed: 3800 MHz | |
| Current Speed: 3500 MHz | |
| Status: Populated, Enabled | |
| Upgrade: Socket BGA1155 | |
| L1 Cache Handle: 0x000D | |
| L2 Cache Handle: 0x000C | |
| L3 Cache Handle: 0x000E | |
| Serial Number: Not Specified | |
| Asset Tag: Fill By OEM | |
| Part Number: Fill By OEM | |
| Core Count: 4 | |
| Core Enabled: 4 | |
| Thread Count: 8 | |
| Characteristics: | |
| 64-bit capable | |
| Handle 0x0011, DMI type 17, 34 bytes | |
| Memory Device | |
| Array Handle: 0x000F | |
| Error Information Handle: Not Provided | |
| Total Width: 64 bits | |
| Data Width: 64 bits | |
| Size: 4096 MB | |
| Form Factor: DIMM | |
| Set: None | |
| Locator: ChannelA-DIMM0 | |
| Bank Locator: BANK 0 | |
| Type: DDR3 | |
| Type Detail: Synchronous | |
| Speed: 1333 MHz | |
| Manufacturer: Hynix/Hyundai | |
| Serial Number: xxxxxxxx | |
| Asset Tag: xxxxxxxxxx | |
| Part Number: HMT351U6CFR8C-H9 | |
| Rank: 2 | |
| Configured Clock Speed: 1333 MHz | |
| Handle 0x0012, DMI type 20, 35 bytes | |
| Memory Device Mapped Address | |
| Starting Address: 0x00000000000 | |
| Ending Address: 0x000FFFFFFFF | |
| Range Size: 4 GB | |
| Physical Device Handle: 0x0011 | |
| Memory Array Mapped Address Handle: 0x0019 | |
| Partition Row Position: 1 | |
| Interleave Position: 1 | |
| Interleaved Data Depth: 2 | |
| Handle 0x0013, DMI type 17, 34 bytes | |
| Memory Device | |
| Array Handle: 0x000F | |
| Error Information Handle: Not Provided | |
| Total Width: 64 bits | |
| Data Width: 64 bits | |
| Size: 4096 MB | |
| Form Factor: DIMM | |
| Set: None | |
| Locator: ChannelA-DIMM1 | |
| Bank Locator: BANK 1 | |
| Type: DDR3 | |
| Type Detail: Synchronous | |
| Speed: 1333 MHz | |
| Manufacturer: Hynix/Hyundai | |
| Serial Number: xxxxxxxx | |
| Asset Tag: xxxxxxxxxx | |
| Part Number: HMT351U6CFR8C-H9 | |
| Rank: 2 | |
| Configured Clock Speed: 1333 MHz | |
| Handle 0x0014, DMI type 20, 35 bytes | |
| Memory Device Mapped Address | |
| Starting Address: 0x00200000000 | |
| Ending Address: 0x002FFFFFFFF | |
| Range Size: 4 GB | |
| Physical Device Handle: 0x0013 | |
| Memory Array Mapped Address Handle: 0x0019 | |
| Partition Row Position: 1 | |
| Interleave Position: 1 | |
| Interleaved Data Depth: 2 | |
| Handle 0x0015, DMI type 17, 34 bytes | |
| Memory Device | |
| Array Handle: 0x000F | |
| Error Information Handle: Not Provided | |
| Total Width: 64 bits | |
| Data Width: 64 bits | |
| Size: 4096 MB | |
| Form Factor: DIMM | |
| Set: None | |
| Locator: ChannelB-DIMM0 | |
| Bank Locator: BANK 2 | |
| Type: DDR3 | |
| Type Detail: Synchronous | |
| Speed: 1333 MHz | |
| Manufacturer: Hynix/Hyundai | |
| Serial Number: xxxxxxxx | |
| Asset Tag: 9876543210 | |
| Part Number: HMT351U6CFR8C-H9 | |
| Rank: 2 | |
| Configured Clock Speed: 1333 MHz | |
| Handle 0x0016, DMI type 20, 35 bytes | |
| Memory Device Mapped Address | |
| Starting Address: 0x00100000000 | |
| Ending Address: 0x001FFFFFFFF | |
| Range Size: 4 GB | |
| Physical Device Handle: 0x0015 | |
| Memory Array Mapped Address Handle: 0x0019 | |
| Partition Row Position: 1 | |
| Interleave Position: 2 | |
| Interleaved Data Depth: 2 | |
| Handle 0x0017, DMI type 17, 34 bytes | |
| Memory Device | |
| Array Handle: 0x000F | |
| Error Information Handle: Not Provided | |
| Total Width: 64 bits | |
| Data Width: 64 bits | |
| Size: 4096 MB | |
| Form Factor: DIMM | |
| Set: None | |
| Locator: ChannelB-DIMM1 | |
| Bank Locator: BANK 3 | |
| Type: DDR3 | |
| Type Detail: Synchronous | |
| Speed: 1333 MHz | |
| Manufacturer: Hynix/Hyundai | |
| Serial Number: xxxxxxxx | |
| Asset Tag: 9876543210 | |
| Part Number: HMT351U6CFR8C-H9 | |
| Rank: 2 | |
| Configured Clock Speed: 1333 MHz | |
| Handle 0x0018, DMI type 20, 35 bytes | |
| Memory Device Mapped Address | |
| Starting Address: 0x00300000000 | |
| Ending Address: 0x003FFFFFFFF | |
| Range Size: 4 GB | |
| Physical Device Handle: 0x0017 | |
| Memory Array Mapped Address Handle: 0x0019 | |
| Partition Row Position: 1 | |
| Interleave Position: 2 | |
| Interleaved Data Depth: 2 | |
| Handle 0x0019, DMI type 19, 31 bytes | |
| Memory Array Mapped Address | |
| Starting Address: 0x00000000000 | |
| Ending Address: 0x003FFFFFFFF | |
| Range Size: 16 GB | |
| Physical Array Handle: 0x000F | |
| Partition Width: 4 | |
| Handle 0x001C, DMI type 131, 64 bytes | |
| OEM-specific Type | |
| Header and Data: | |
| 83 40 1C 00 31 00 00 00 00 00 00 00 00 00 00 00 | |
| F8 00 44 1C FF FF FF FF 01 00 00 00 00 00 08 00 | |
| 82 05 02 00 00 00 00 00 C8 00 FF FF 00 00 00 00 | |
| 00 00 00 00 36 00 00 00 76 50 72 6F 00 00 00 00 | |
| Handle 0x001D, DMI type 127, 4 bytes | |
| End Of Table | |
| Initializing cgroup subsys cpuset | |
| Initializing cgroup subsys cpu | |
| Linux version 2.6.32-431.11.2.el6.x86_64 ([email protected]) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-4) (GCC) ) #1 SMP Tue Mar 25 19:59:55 UTC 2014 | |
| Command line: ro root=/dev/mapper/vg_madball-lv_root rd_NO_LUKS KEYBOARDTYPE=pc KEYTABLE=us LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_madball/lv_swap rd_LVM_LV=vg_madball/lv_root rd_NO_DM rhgb quiet | |
| KERNEL supported cpus: | |
| Intel GenuineIntel | |
| AMD AuthenticAMD | |
| Centaur CentaurHauls | |
| BIOS-provided physical RAM map: | |
| BIOS-e820: 0000000000000000 - 000000000009f000 (usable) | |
| BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) | |
| BIOS-e820: 0000000000100000 - 00000000de3c8000 (usable) | |
| BIOS-e820: 00000000de3c8000 - 00000000de940000 (reserved) | |
| BIOS-e820: 00000000de940000 - 00000000debc0000 (ACPI NVS) | |
| BIOS-e820: 00000000debc0000 - 00000000debc5000 (ACPI data) | |
| BIOS-e820: 00000000debc5000 - 00000000dec08000 (ACPI NVS) | |
| BIOS-e820: 00000000dec08000 - 00000000df4c4000 (usable) | |
| BIOS-e820: 00000000df4c4000 - 00000000df7f2000 (reserved) | |
| BIOS-e820: 00000000df7f2000 - 00000000df800000 (usable) | |
| BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) | |
| BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) | |
| BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved) | |
| BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) | |
| BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) | |
| BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) | |
| BIOS-e820: 0000000100000000 - 000000041f000000 (usable) | |
| EFI v2.31 by American Megatrends | |
| ACPI=0xdeba7000 ACPI 2.0=0xdeba7000 SMBIOS=0xf0480 MPS=0xfc940 | |
| EFI: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB) | |
| EFI: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x0000000000046000) (0MB) | |
| EFI: mem02: type=2, attr=0xf, range=[0x0000000000046000-0x0000000000048000) (0MB) | |
| EFI: mem03: type=4, attr=0xf, range=[0x0000000000048000-0x0000000000059000) (0MB) | |
| EFI: mem04: type=7, attr=0xf, range=[0x0000000000059000-0x000000000005f000) (0MB) | |
| EFI: mem05: type=4, attr=0xf, range=[0x000000000005f000-0x0000000000060000) (0MB) | |
| EFI: mem06: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB) | |
| EFI: mem07: type=6, attr=0x800000000000000f, range=[0x000000000009f000-0x00000000000a0000) (0MB) | |
| EFI: mem08: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB) | |
| EFI: mem09: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB) | |
| EFI: mem10: type=7, attr=0xf, range=[0x0000000001100000-0x0000000007bfb000) (106MB) | |
| EFI: mem11: type=2, attr=0xf, range=[0x0000000007bfb000-0x0000000008000000) (4MB) | |
| EFI: mem12: type=4, attr=0xf, range=[0x0000000008000000-0x0000000008f8d000) (15MB) | |
| EFI: mem13: type=3, attr=0xf, range=[0x0000000008f8d000-0x0000000008f98000) (0MB) | |
| EFI: mem14: type=4, attr=0xf, range=[0x0000000008f98000-0x0000000008fa3000) (0MB) | |
| EFI: mem15: type=3, attr=0xf, range=[0x0000000008fa3000-0x0000000008fa9000) (0MB) | |
| EFI: mem16: type=4, attr=0xf, range=[0x0000000008fa9000-0x0000000009406000) (4MB) | |
| EFI: mem17: type=3, attr=0xf, range=[0x0000000009406000-0x0000000009407000) (0MB) | |
| EFI: mem18: type=4, attr=0xf, range=[0x0000000009407000-0x000000000940f000) (0MB) | |
| EFI: mem19: type=3, attr=0xf, range=[0x000000000940f000-0x0000000009410000) (0MB) | |
| EFI: mem20: type=4, attr=0xf, range=[0x0000000009410000-0x0000000009417000) (0MB) | |
| EFI: mem21: type=3, attr=0xf, range=[0x0000000009417000-0x0000000009418000) (0MB) | |
| EFI: mem22: type=4, attr=0xf, range=[0x0000000009418000-0x000000000941d000) (0MB) | |
| EFI: mem23: type=3, attr=0xf, range=[0x000000000941d000-0x000000000941f000) (0MB) | |
| EFI: mem24: type=4, attr=0xf, range=[0x000000000941f000-0x0000000009422000) (0MB) | |
| EFI: mem25: type=3, attr=0xf, range=[0x0000000009422000-0x0000000009424000) (0MB) | |
| EFI: mem26: type=4, attr=0xf, range=[0x0000000009424000-0x0000000009427000) (0MB) | |
| EFI: mem27: type=3, attr=0xf, range=[0x0000000009427000-0x0000000009428000) (0MB) | |
| EFI: mem28: type=4, attr=0xf, range=[0x0000000009428000-0x0000000009429000) (0MB) | |
| EFI: mem29: type=3, attr=0xf, range=[0x0000000009429000-0x000000000942a000) (0MB) | |
| EFI: mem30: type=4, attr=0xf, range=[0x000000000942a000-0x000000000942d000) (0MB) | |
| EFI: mem31: type=3, attr=0xf, range=[0x000000000942d000-0x0000000009430000) (0MB) | |
| EFI: mem32: type=4, attr=0xf, range=[0x0000000009430000-0x0000000009439000) (0MB) | |
| EFI: mem33: type=3, attr=0xf, range=[0x0000000009439000-0x000000000943a000) (0MB) | |
| EFI: mem34: type=4, attr=0xf, range=[0x000000000943a000-0x000000000943c000) (0MB) | |
| EFI: mem35: type=3, attr=0xf, range=[0x000000000943c000-0x000000000943f000) (0MB) | |
| EFI: mem36: type=4, attr=0xf, range=[0x000000000943f000-0x0000000009441000) (0MB) | |
| EFI: mem37: type=3, attr=0xf, range=[0x0000000009441000-0x0000000009445000) (0MB) | |
| EFI: mem38: type=4, attr=0xf, range=[0x0000000009445000-0x000000000944c000) (0MB) | |
| EFI: mem39: type=3, attr=0xf, range=[0x000000000944c000-0x0000000009451000) (0MB) | |
| EFI: mem40: type=4, attr=0xf, range=[0x0000000009451000-0x0000000009456000) (0MB) | |
| EFI: mem41: type=3, attr=0xf, range=[0x0000000009456000-0x0000000009458000) (0MB) | |
| EFI: mem42: type=4, attr=0xf, range=[0x0000000009458000-0x000000000945b000) (0MB) | |
| EFI: mem43: type=3, attr=0xf, range=[0x000000000945b000-0x000000000945d000) (0MB) | |
| EFI: mem44: type=4, attr=0xf, range=[0x000000000945d000-0x0000000009471000) (0MB) | |
| EFI: mem45: type=3, attr=0xf, range=[0x0000000009471000-0x0000000009472000) (0MB) | |
| EFI: mem46: type=4, attr=0xf, range=[0x0000000009472000-0x0000000009495000) (0MB) | |
| EFI: mem47: type=3, attr=0xf, range=[0x0000000009495000-0x0000000009496000) (0MB) | |
| EFI: mem48: type=4, attr=0xf, range=[0x0000000009496000-0x000000000949c000) (0MB) | |
| EFI: mem49: type=3, attr=0xf, range=[0x000000000949c000-0x000000000949f000) (0MB) | |
| EFI: mem50: type=4, attr=0xf, range=[0x000000000949f000-0x00000000094a2000) (0MB) | |
| EFI: mem51: type=3, attr=0xf, range=[0x00000000094a2000-0x00000000094ac000) (0MB) | |
| EFI: mem52: type=4, attr=0xf, range=[0x00000000094ac000-0x00000000094c5000) (0MB) | |
| EFI: mem53: type=3, attr=0xf, range=[0x00000000094c5000-0x00000000094c8000) (0MB) | |
| EFI: mem54: type=4, attr=0xf, range=[0x00000000094c8000-0x00000000094cd000) (0MB) | |
| EFI: mem55: type=3, attr=0xf, range=[0x00000000094cd000-0x00000000094cf000) (0MB) | |
| EFI: mem56: type=4, attr=0xf, range=[0x00000000094cf000-0x00000000094d6000) (0MB) | |
| EFI: mem57: type=3, attr=0xf, range=[0x00000000094d6000-0x00000000094da000) (0MB) | |
| EFI: mem58: type=4, attr=0xf, range=[0x00000000094da000-0x00000000094dc000) (0MB) | |
| EFI: mem59: type=3, attr=0xf, range=[0x00000000094dc000-0x00000000094e1000) (0MB) | |
| EFI: mem60: type=4, attr=0xf, range=[0x00000000094e1000-0x00000000094e8000) (0MB) | |
| EFI: mem61: type=3, attr=0xf, range=[0x00000000094e8000-0x00000000094e9000) (0MB) | |
| EFI: mem62: type=4, attr=0xf, range=[0x00000000094e9000-0x00000000094ec000) (0MB) | |
| EFI: mem63: type=3, attr=0xf, range=[0x00000000094ec000-0x00000000094f0000) (0MB) | |
| EFI: mem64: type=4, attr=0xf, range=[0x00000000094f0000-0x00000000094f5000) (0MB) | |
| EFI: mem65: type=3, attr=0xf, range=[0x00000000094f5000-0x00000000094f9000) (0MB) | |
| EFI: mem66: type=4, attr=0xf, range=[0x00000000094f9000-0x00000000094fd000) (0MB) | |
| EFI: mem67: type=3, attr=0xf, range=[0x00000000094fd000-0x00000000094ff000) (0MB) | |
| EFI: mem68: type=4, attr=0xf, range=[0x00000000094ff000-0x0000000009507000) (0MB) | |
| EFI: mem69: type=3, attr=0xf, range=[0x0000000009507000-0x0000000009508000) (0MB) | |
| EFI: mem70: type=4, attr=0xf, range=[0x0000000009508000-0x0000000009509000) (0MB) | |
| EFI: mem71: type=3, attr=0xf, range=[0x0000000009509000-0x000000000950b000) (0MB) | |
| EFI: mem72: type=4, attr=0xf, range=[0x000000000950b000-0x000000000950e000) (0MB) | |
| EFI: mem73: type=3, attr=0xf, range=[0x000000000950e000-0x0000000009510000) (0MB) | |
| EFI: mem74: type=4, attr=0xf, range=[0x0000000009510000-0x0000000009512000) (0MB) | |
| EFI: mem75: type=3, attr=0xf, range=[0x0000000009512000-0x0000000009514000) (0MB) | |
| EFI: mem76: type=4, attr=0xf, range=[0x0000000009514000-0x0000000009517000) (0MB) | |
| EFI: mem77: type=3, attr=0xf, range=[0x0000000009517000-0x0000000009519000) (0MB) | |
| EFI: mem78: type=4, attr=0xf, range=[0x0000000009519000-0x000000000951b000) (0MB) | |
| EFI: mem79: type=3, attr=0xf, range=[0x000000000951b000-0x000000000951d000) (0MB) | |
| EFI: mem80: type=4, attr=0xf, range=[0x000000000951d000-0x0000000009520000) (0MB) | |
| EFI: mem81: type=3, attr=0xf, range=[0x0000000009520000-0x0000000009521000) (0MB) | |
| EFI: mem82: type=4, attr=0xf, range=[0x0000000009521000-0x0000000009528000) (0MB) | |
| EFI: mem83: type=3, attr=0xf, range=[0x0000000009528000-0x000000000952a000) (0MB) | |
| EFI: mem84: type=4, attr=0xf, range=[0x000000000952a000-0x0000000009534000) (0MB) | |
| EFI: mem85: type=3, attr=0xf, range=[0x0000000009534000-0x0000000009535000) (0MB) | |
| EFI: mem86: type=4, attr=0xf, range=[0x0000000009535000-0x0000000009541000) (0MB) | |
| EFI: mem87: type=3, attr=0xf, range=[0x0000000009541000-0x0000000009549000) (0MB) | |
| EFI: mem88: type=4, attr=0xf, range=[0x0000000009549000-0x0000000009551000) (0MB) | |
| EFI: mem89: type=3, attr=0xf, range=[0x0000000009551000-0x0000000009554000) (0MB) | |
| EFI: mem90: type=4, attr=0xf, range=[0x0000000009554000-0x000000000955a000) (0MB) | |
| EFI: mem91: type=3, attr=0xf, range=[0x000000000955a000-0x000000000955d000) (0MB) | |
| EFI: mem92: type=4, attr=0xf, range=[0x000000000955d000-0x0000000009561000) (0MB) | |
| EFI: mem93: type=3, attr=0xf, range=[0x0000000009561000-0x0000000009562000) (0MB) | |
| EFI: mem94: type=4, attr=0xf, range=[0x0000000009562000-0x0000000009563000) (0MB) | |
| EFI: mem95: type=3, attr=0xf, range=[0x0000000009563000-0x0000000009568000) (0MB) | |
| EFI: mem96: type=4, attr=0xf, range=[0x0000000009568000-0x000000000957b000) (0MB) | |
| EFI: mem97: type=3, attr=0xf, range=[0x000000000957b000-0x000000000957e000) (0MB) | |
| EFI: mem98: type=4, attr=0xf, range=[0x000000000957e000-0x000000000957f000) (0MB) | |
| EFI: mem99: type=3, attr=0xf, range=[0x000000000957f000-0x0000000009585000) (0MB) | |
| EFI: mem100: type=4, attr=0xf, range=[0x0000000009585000-0x0000000009589000) (0MB) | |
| EFI: mem101: type=3, attr=0xf, range=[0x0000000009589000-0x000000000958d000) (0MB) | |
| EFI: mem102: type=4, attr=0xf, range=[0x000000000958d000-0x000000000959b000) (0MB) | |
| EFI: mem103: type=3, attr=0xf, range=[0x000000000959b000-0x00000000095a6000) (0MB) | |
| EFI: mem104: type=4, attr=0xf, range=[0x00000000095a6000-0x00000000095b3000) (0MB) | |
| EFI: mem105: type=3, attr=0xf, range=[0x00000000095b3000-0x00000000095b4000) (0MB) | |
| EFI: mem106: type=4, attr=0xf, range=[0x00000000095b4000-0x00000000095b7000) (0MB) | |
| EFI: mem107: type=3, attr=0xf, range=[0x00000000095b7000-0x00000000095bd000) (0MB) | |
| EFI: mem108: type=4, attr=0xf, range=[0x00000000095bd000-0x00000000095c3000) (0MB) | |
| EFI: mem109: type=3, attr=0xf, range=[0x00000000095c3000-0x00000000095c5000) (0MB) | |
| EFI: mem110: type=4, attr=0xf, range=[0x00000000095c5000-0x00000000095c9000) (0MB) | |
| EFI: mem111: type=3, attr=0xf, range=[0x00000000095c9000-0x00000000095cc000) (0MB) | |
| EFI: mem112: type=4, attr=0xf, range=[0x00000000095cc000-0x00000000095d4000) (0MB) | |
| EFI: mem113: type=3, attr=0xf, range=[0x00000000095d4000-0x00000000095d7000) (0MB) | |
| EFI: mem114: type=4, attr=0xf, range=[0x00000000095d7000-0x00000000095df000) (0MB) | |
| EFI: mem115: type=3, attr=0xf, range=[0x00000000095df000-0x00000000095e2000) (0MB) | |
| EFI: mem116: type=4, attr=0xf, range=[0x00000000095e2000-0x00000000095e6000) (0MB) | |
| EFI: mem117: type=3, attr=0xf, range=[0x00000000095e6000-0x00000000095ea000) (0MB) | |
| EFI: mem118: type=4, attr=0xf, range=[0x00000000095ea000-0x00000000095f0000) (0MB) | |
| EFI: mem119: type=3, attr=0xf, range=[0x00000000095f0000-0x00000000095f3000) (0MB) | |
| EFI: mem120: type=4, attr=0xf, range=[0x00000000095f3000-0x00000000095fd000) (0MB) | |
| EFI: mem121: type=3, attr=0xf, range=[0x00000000095fd000-0x0000000009617000) (0MB) | |
| EFI: mem122: type=4, attr=0xf, range=[0x0000000009617000-0x0000000009619000) (0MB) | |
| EFI: mem123: type=3, attr=0xf, range=[0x0000000009619000-0x000000000961f000) (0MB) | |
| EFI: mem124: type=4, attr=0xf, range=[0x000000000961f000-0x0000000009627000) (0MB) | |
| EFI: mem125: type=3, attr=0xf, range=[0x0000000009627000-0x0000000009629000) (0MB) | |
| EFI: mem126: type=4, attr=0xf, range=[0x0000000009629000-0x000000000962c000) (0MB) | |
| EFI: mem127: type=3, attr=0xf, range=[0x000000000962c000-0x000000000962f000) (0MB) | |
| EFI: mem128: type=4, attr=0xf, range=[0x000000000962f000-0x0000000009639000) (0MB) | |
| EFI: mem129: type=3, attr=0xf, range=[0x0000000009639000-0x000000000963f000) (0MB) | |
| EFI: mem130: type=4, attr=0xf, range=[0x000000000963f000-0x0000000009643000) (0MB) | |
| EFI: mem131: type=3, attr=0xf, range=[0x0000000009643000-0x0000000009645000) (0MB) | |
| EFI: mem132: type=4, attr=0xf, range=[0x0000000009645000-0x0000000009647000) (0MB) | |
| EFI: mem133: type=3, attr=0xf, range=[0x0000000009647000-0x0000000009648000) (0MB) | |
| EFI: mem134: type=4, attr=0xf, range=[0x0000000009648000-0x000000000964a000) (0MB) | |
| EFI: mem135: type=3, attr=0xf, range=[0x000000000964a000-0x000000000964c000) (0MB) | |
| EFI: mem136: type=4, attr=0xf, range=[0x000000000964c000-0x0000000009650000) (0MB) | |
| EFI: mem137: type=3, attr=0xf, range=[0x0000000009650000-0x0000000009655000) (0MB) | |
| EFI: mem138: type=4, attr=0xf, range=[0x0000000009655000-0x000000000965a000) (0MB) | |
| EFI: mem139: type=3, attr=0xf, range=[0x000000000965a000-0x000000000965d000) (0MB) | |
| EFI: mem140: type=4, attr=0xf, range=[0x000000000965d000-0x0000000009669000) (0MB) | |
| EFI: mem141: type=3, attr=0xf, range=[0x0000000009669000-0x00000000096d2000) (0MB) | |
| EFI: mem142: type=4, attr=0xf, range=[0x00000000096d2000-0x00000000096e9000) (0MB) | |
| EFI: mem143: type=3, attr=0xf, range=[0x00000000096e9000-0x00000000096ef000) (0MB) | |
| EFI: mem144: type=4, attr=0xf, range=[0x00000000096ef000-0x00000000096f0000) (0MB) | |
| EFI: mem145: type=3, attr=0xf, range=[0x00000000096f0000-0x00000000096f4000) (0MB) | |
| EFI: mem146: type=4, attr=0xf, range=[0x00000000096f4000-0x00000000096f7000) (0MB) | |
| EFI: mem147: type=3, attr=0xf, range=[0x00000000096f7000-0x00000000096fb000) (0MB) | |
| EFI: mem148: type=4, attr=0xf, range=[0x00000000096fb000-0x0000000009700000) (0MB) | |
| EFI: mem149: type=3, attr=0xf, range=[0x0000000009700000-0x0000000009702000) (0MB) | |
| EFI: mem150: type=4, attr=0xf, range=[0x0000000009702000-0x0000000009705000) (0MB) | |
| EFI: mem151: type=3, attr=0xf, range=[0x0000000009705000-0x0000000009707000) (0MB) | |
| EFI: mem152: type=4, attr=0xf, range=[0x0000000009707000-0x000000000970a000) (0MB) | |
| EFI: mem153: type=3, attr=0xf, range=[0x000000000970a000-0x000000000970d000) (0MB) | |
| EFI: mem154: type=4, attr=0xf, range=[0x000000000970d000-0x000000000970e000) (0MB) | |
| EFI: mem155: type=3, attr=0xf, range=[0x000000000970e000-0x0000000009713000) (0MB) | |
| EFI: mem156: type=4, attr=0xf, range=[0x0000000009713000-0x000000000971f000) (0MB) | |
| EFI: mem157: type=3, attr=0xf, range=[0x000000000971f000-0x000000000972e000) (0MB) | |
| EFI: mem158: type=4, attr=0xf, range=[0x000000000972e000-0x000000000973b000) (0MB) | |
| EFI: mem159: type=3, attr=0xf, range=[0x000000000973b000-0x000000000973d000) (0MB) | |
| EFI: mem160: type=4, attr=0xf, range=[0x000000000973d000-0x0000000009741000) (0MB) | |
| EFI: mem161: type=3, attr=0xf, range=[0x0000000009741000-0x0000000009743000) (0MB) | |
| EFI: mem162: type=4, attr=0xf, range=[0x0000000009743000-0x0000000009745000) (0MB) | |
| EFI: mem163: type=3, attr=0xf, range=[0x0000000009745000-0x0000000009747000) (0MB) | |
| EFI: mem164: type=4, attr=0xf, range=[0x0000000009747000-0x000000000974c000) (0MB) | |
| EFI: mem165: type=3, attr=0xf, range=[0x000000000974c000-0x000000000974e000) (0MB) | |
| EFI: mem166: type=4, attr=0xf, range=[0x000000000974e000-0x0000000009751000) (0MB) | |
| EFI: mem167: type=3, attr=0xf, range=[0x0000000009751000-0x0000000009752000) (0MB) | |
| EFI: mem168: type=4, attr=0xf, range=[0x0000000009752000-0x0000000009753000) (0MB) | |
| EFI: mem169: type=3, attr=0xf, range=[0x0000000009753000-0x0000000009755000) (0MB) | |
| EFI: mem170: type=4, attr=0xf, range=[0x0000000009755000-0x0000000009757000) (0MB) | |
| EFI: mem171: type=3, attr=0xf, range=[0x0000000009757000-0x0000000009759000) (0MB) | |
| EFI: mem172: type=4, attr=0xf, range=[0x0000000009759000-0x000000000975f000) (0MB) | |
| EFI: mem173: type=3, attr=0xf, range=[0x000000000975f000-0x0000000009763000) (0MB) | |
| EFI: mem174: type=4, attr=0xf, range=[0x0000000009763000-0x000000000978c000) (0MB) | |
| EFI: mem175: type=3, attr=0xf, range=[0x000000000978c000-0x000000000978f000) (0MB) | |
| EFI: mem176: type=4, attr=0xf, range=[0x000000000978f000-0x0000000009796000) (0MB) | |
| EFI: mem177: type=3, attr=0xf, range=[0x0000000009796000-0x0000000009797000) (0MB) | |
| EFI: mem178: type=4, attr=0xf, range=[0x0000000009797000-0x000000000979c000) (0MB) | |
| EFI: mem179: type=3, attr=0xf, range=[0x000000000979c000-0x000000000979d000) (0MB) | |
| EFI: mem180: type=4, attr=0xf, range=[0x000000000979d000-0x000000000979f000) (0MB) | |
| EFI: mem181: type=3, attr=0xf, range=[0x000000000979f000-0x00000000097a4000) (0MB) | |
| EFI: mem182: type=4, attr=0xf, range=[0x00000000097a4000-0x00000000097ab000) (0MB) | |
| EFI: mem183: type=3, attr=0xf, range=[0x00000000097ab000-0x00000000097ae000) (0MB) | |
| EFI: mem184: type=4, attr=0xf, range=[0x00000000097ae000-0x00000000097b6000) (0MB) | |
| EFI: mem185: type=3, attr=0xf, range=[0x00000000097b6000-0x00000000097bc000) (0MB) | |
| EFI: mem186: type=4, attr=0xf, range=[0x00000000097bc000-0x00000000097ca000) (0MB) | |
| EFI: mem187: type=3, attr=0xf, range=[0x00000000097ca000-0x00000000097de000) (0MB) | |
| EFI: mem188: type=4, attr=0xf, range=[0x00000000097de000-0x00000000097fa000) (0MB) | |
| EFI: mem189: type=3, attr=0xf, range=[0x00000000097fa000-0x00000000097fc000) (0MB) | |
| EFI: mem190: type=4, attr=0xf, range=[0x00000000097fc000-0x00000000097fe000) (0MB) | |
| EFI: mem191: type=3, attr=0xf, range=[0x00000000097fe000-0x000000000980b000) (0MB) | |
| EFI: mem192: type=4, attr=0xf, range=[0x000000000980b000-0x0000000009917000) (1MB) | |
| EFI: mem193: type=3, attr=0xf, range=[0x0000000009917000-0x0000000009919000) (0MB) | |
| EFI: mem194: type=4, attr=0xf, range=[0x0000000009919000-0x0000000009927000) (0MB) | |
| EFI: mem195: type=3, attr=0xf, range=[0x0000000009927000-0x0000000009929000) (0MB) | |
| EFI: mem196: type=4, attr=0xf, range=[0x0000000009929000-0x00000000099d6000) (0MB) | |
| EFI: mem197: type=3, attr=0xf, range=[0x00000000099d6000-0x00000000099e4000) (0MB) | |
| EFI: mem198: type=4, attr=0xf, range=[0x00000000099e4000-0x00000000099f7000) (0MB) | |
| EFI: mem199: type=2, attr=0xf, range=[0x00000000099f7000-0x00000000099f8000) (0MB) | |
| EFI: mem200: type=4, attr=0xf, range=[0x00000000099f8000-0x00000000099f9000) (0MB) | |
| EFI: mem201: type=2, attr=0xf, range=[0x00000000099f9000-0x0000000009a2b000) (0MB) | |
| EFI: mem202: type=4, attr=0xf, range=[0x0000000009a2b000-0x0000000009a80000) (0MB) | |
| EFI: mem203: type=2, attr=0xf, range=[0x0000000009a80000-0x0000000009abe000) (0MB) | |
| EFI: mem204: type=1, attr=0xf, range=[0x0000000009abe000-0x0000000009afe000) (0MB) | |
| EFI: mem205: type=2, attr=0xf, range=[0x0000000009afe000-0x0000000009b20000) (0MB) | |
| EFI: mem206: type=4, attr=0xf, range=[0x0000000009b20000-0x0000000009c6c000) (1MB) | |
| EFI: mem207: type=2, attr=0xf, range=[0x0000000009c6c000-0x0000000009c86000) (0MB) | |
| EFI: mem208: type=4, attr=0xf, range=[0x0000000009c86000-0x0000000009c8d000) (0MB) | |
| EFI: mem209: type=2, attr=0xf, range=[0x0000000009c8d000-0x0000000009c91000) (0MB) | |
| EFI: mem210: type=4, attr=0xf, range=[0x0000000009c91000-0x0000000009c9a000) (0MB) | |
| EFI: mem211: type=2, attr=0xf, range=[0x0000000009c9a000-0x0000000009ca0000) (0MB) | |
| EFI: mem212: type=4, attr=0xf, range=[0x0000000009ca0000-0x0000000009e1e000) (1MB) | |
| EFI: mem213: type=2, attr=0xf, range=[0x0000000009e1e000-0x0000000009fc2000) (1MB) | |
| EFI: mem214: type=7, attr=0xf, range=[0x0000000009fc2000-0x0000000009fec000) (0MB) | |
| EFI: mem215: type=4, attr=0xf, range=[0x0000000009fec000-0x000000000a22d000) (2MB) | |
| EFI: mem216: type=2, attr=0xf, range=[0x000000000a22d000-0x000000000a6e1000) (4MB) | |
| EFI: mem217: type=7, attr=0xf, range=[0x000000000a6e1000-0x000000000a7c9000) (0MB) | |
| EFI: mem218: type=4, attr=0xf, range=[0x000000000a7c9000-0x000000000ad6d000) (5MB) | |
| EFI: mem219: type=2, attr=0xf, range=[0x000000000ad6d000-0x000000000b15a000) (3MB) | |
| EFI: mem220: type=7, attr=0xf, range=[0x000000000b15a000-0x000000007efac000) (1854MB) | |
| EFI: mem221: type=2, attr=0xf, range=[0x000000007efac000-0x000000007ffff000) (16MB) | |
| EFI: mem222: type=7, attr=0xf, range=[0x000000007ffff000-0x00000000de3c8000) (1507MB) | |
| EFI: mem223: type=5, attr=0x800000000000000f, range=[0x00000000de3c8000-0x00000000de416000) (0MB) | |
| EFI: mem224: type=6, attr=0x800000000000000f, range=[0x00000000de416000-0x00000000de422000) (0MB) | |
| EFI: mem225: type=6, attr=0x800000000000000f, range=[0x00000000de422000-0x00000000de426000) (0MB) | |
| EFI: mem226: type=6, attr=0x800000000000000f, range=[0x00000000de426000-0x00000000de427000) (0MB) | |
| EFI: mem227: type=6, attr=0x800000000000000f, range=[0x00000000de427000-0x00000000de428000) (0MB) | |
| EFI: mem228: type=6, attr=0x800000000000000f, range=[0x00000000de428000-0x00000000de429000) (0MB) | |
| EFI: mem229: type=6, attr=0x800000000000000f, range=[0x00000000de429000-0x00000000de440000) (0MB) | |
| EFI: mem230: type=0, attr=0xf, range=[0x00000000de440000-0x00000000de899000) (4MB) | |
| EFI: mem231: type=0, attr=0xf, range=[0x00000000de899000-0x00000000de8d5000) (0MB) | |
| EFI: mem232: type=0, attr=0xf, range=[0x00000000de8d5000-0x00000000de8e4000) (0MB) | |
| EFI: mem233: type=0, attr=0xf, range=[0x00000000de8e4000-0x00000000de8e6000) (0MB) | |
| EFI: mem234: type=0, attr=0xf, range=[0x00000000de8e6000-0x00000000de8ed000) (0MB) | |
| EFI: mem235: type=0, attr=0xf, range=[0x00000000de8ed000-0x00000000de940000) (0MB) | |
| EFI: mem236: type=10, attr=0xf, range=[0x00000000de940000-0x00000000deb1f000) (1MB) | |
| EFI: mem237: type=10, attr=0xf, range=[0x00000000deb1f000-0x00000000debc0000) (0MB) | |
| EFI: mem238: type=9, attr=0xf, range=[0x00000000debc0000-0x00000000debc4000) (0MB) | |
| EFI: mem239: type=9, attr=0xf, range=[0x00000000debc4000-0x00000000debc5000) (0MB) | |
| EFI: mem240: type=10, attr=0xf, range=[0x00000000debc5000-0x00000000dec08000) (0MB) | |
| EFI: mem241: type=4, attr=0xf, range=[0x00000000dec08000-0x00000000ded54000) (1MB) | |
| EFI: mem242: type=3, attr=0xf, range=[0x00000000ded54000-0x00000000df4b5000) (7MB) | |
| EFI: mem243: type=4, attr=0xf, range=[0x00000000df4b5000-0x00000000df4b8000) (0MB) | |
| EFI: mem244: type=3, attr=0xf, range=[0x00000000df4b8000-0x00000000df4ba000) (0MB) | |
| EFI: mem245: type=4, attr=0xf, range=[0x00000000df4ba000-0x00000000df4bb000) (0MB) | |
| EFI: mem246: type=3, attr=0xf, range=[0x00000000df4bb000-0x00000000df4bd000) (0MB) | |
| EFI: mem247: type=4, attr=0xf, range=[0x00000000df4bd000-0x00000000df4c4000) (0MB) | |
| EFI: mem248: type=6, attr=0x800000000000000f, range=[0x00000000df4c4000-0x00000000df7f2000) (3MB) | |
| EFI: mem249: type=4, attr=0xf, range=[0x00000000df7f2000-0x00000000df800000) (0MB) | |
| EFI: mem250: type=7, attr=0xf, range=[0x0000000100000000-0x000000041f000000) (12784MB) | |
| EFI: mem251: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB) | |
| EFI: mem252: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB) | |
| EFI: mem253: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB) | |
| EFI: mem254: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB) | |
| EFI: mem255: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB) | |
| EFI: mem256: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB) | |
| DMI 2.7 present. | |
| SMBIOS version 2.7 @ 0xF0480 | |
| DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z68 Pro3, BIOS P2.10 05/07/2012 | |
| AMI BIOS detected: BIOS may corrupt low RAM, working around it. | |
| e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) | |
| e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) | |
| e820 remove range: 00000000000a0000 - 0000000000100000 (usable) | |
| last_pfn = 0x41f000 max_arch_pfn = 0x400000000 | |
| MTRR default type: uncachable | |
| MTRR fixed ranges enabled: | |
| 00000-9FFFF write-back | |
| A0000-BFFFF uncachable | |
| C0000-DBFFF write-protect | |
| DC000-DFFFF uncachable | |
| E0000-FFFFF write-protect | |
| MTRR variable ranges enabled: | |
| 0 base 000000000 mask C00000000 write-back | |
| 1 base 400000000 mask FF0000000 write-back | |
| 2 base 410000000 mask FF8000000 write-back | |
| 3 base 418000000 mask FFC000000 write-back | |
| 4 base 41C000000 mask FFE000000 write-back | |
| 5 base 41E000000 mask FFF000000 write-back | |
| 6 base 0E0000000 mask FE0000000 uncachable | |
| 7 disabled | |
| 8 disabled | |
| 9 disabled | |
| x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 | |
| original variable MTRRs | |
| reg 0, base: 0GB, range: 16GB, type WB | |
| reg 1, base: 16GB, range: 256MB, type WB | |
| reg 2, base: 16640MB, range: 128MB, type WB | |
| reg 3, base: 16768MB, range: 64MB, type WB | |
| reg 4, base: 16832MB, range: 32MB, type WB | |
| reg 5, base: 16864MB, range: 16MB, type WB | |
| reg 6, base: 3584MB, range: 512MB, type UC | |
| total RAM covered: 16368M | |
| Found optimal setting for mtrr clean up | |
| gran_size: 64K chunk_size: 32M num_reg: 7 lose cover RAM: 0G | |
| New variable MTRRs | |
| reg 0, base: 0GB, range: 2GB, type WB | |
| reg 1, base: 2GB, range: 1GB, type WB | |
| reg 2, base: 3GB, range: 512MB, type WB | |
| reg 3, base: 4GB, range: 4GB, type WB | |
| reg 4, base: 8GB, range: 8GB, type WB | |
| reg 5, base: 16GB, range: 512MB, type WB | |
| reg 6, base: 16880MB, range: 16MB, type UC | |
| e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved) | |
| last_pfn = 0xdf800 max_arch_pfn = 0x400000000 | |
| initial memory mapped : 0 - 20000000 | |
| init_memory_mapping: 0000000000000000-00000000df800000 | |
| 0000000000 - 00df800000 page 2M | |
| kernel direct mapping tables up to df800000 @ 10000-15000 | |
| Use unified mapping for non-reserved e820 regions. | |
| init_memory_mapping: 0000000100000000-000000041f000000 | |
| 0100000000 - 041f000000 page 2M | |
| kernel direct mapping tables up to 41f000000 @ 13000-21000 | |
| RAMDISK: 7efac000 - 7fffefe0 | |
| ACPI: RSDP 00000000deba7000 00024 (v02 ALASKA) | |
| ACPI: XSDT 00000000deba7080 0007C (v01 ALASKA A M I 01072009 AMI 00010013) | |
| ACPI: FACP 00000000debb0978 000F4 (v04 ALASKA A M I 01072009 AMI 00010013) | |
| ACPI: DSDT 00000000deba7190 097E8 (v02 ALASKA A M I 00000014 INTL 20051117) | |
| ACPI: FACS 00000000debbef80 00040 | |
| ACPI: APIC 00000000debb0a70 00092 (v03 ALASKA A M I 01072009 AMI 00010013) | |
| ACPI: ASF! 00000000debb0b08 000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) | |
| ACPI: MCFG 00000000debb0bb0 0003C (v01 ALASKA A M I 01072009 MSFT 00000097) | |
| ACPI: SSDT 00000000debb0bf0 004A6 (v01 Intel_ AoacTabl 00001000 INTL 20091112) | |
| ACPI: AAFT 00000000debb1098 000C2 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) | |
| ACPI: HPET 00000000debb1160 00038 (v01 ALASKA A M I 01072009 AMI. 00000005) | |
| ACPI: SSDT 00000000debb1198 0036D (v01 SataRe SataTabl 00001000 INTL 20091112) | |
| ACPI: SSDT 00000000debb1508 009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117) | |
| ACPI: SSDT 00000000debb1eb8 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117) | |
| ACPI: BGRT 00000000debb2950 0003C (v00 ALASKA A M I 01072009 AMI 00010013) | |
| ACPI: Local APIC address 0xfee00000 | |
| Setting APIC routing to flat. | |
| No NUMA configuration found | |
| Faking a node at 0000000000000000-000000041f000000 | |
| Bootmem setup node 0 0000000000000000-000000041f000000 | |
| NODE_DATA [0000000000020000 - 0000000000053fff] | |
| bootmap [0000000000100000 - 0000000000183dff] pages 84 | |
| (9 early reservations) ==> bootmem [0000000000 - 041f000000] | |
| #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] | |
| #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] | |
| #2 [0001000000 - 0002020aa4] TEXT DATA BSS ==> [0001000000 - 0002020aa4] | |
| #3 [007efac000 - 007fffefe0] RAMDISK ==> [007efac000 - 007fffefe0] | |
| #4 [0000091400 - 0000100000] BIOS reserved ==> [0000091400 - 0000100000] | |
| #5 [0007ffb000 - 0007ffe030] EFI memmap ==> [0007ffb000 - 0007ffe030] | |
| #6 [0002021000 - 0002021178] BRK ==> [0002021000 - 0002021178] | |
| #7 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] | |
| #8 [0000013000 - 0000020000] PGTABLE ==> [0000013000 - 0000020000] | |
| found SMP MP-table at [ffff8800000fcd00] fcd00 | |
| Reserving 130MB of memory at 176MB for crashkernel (System RAM: 16880MB) | |
| [ffffea0000000000-ffffea000e7fffff] PMD -> [ffff880028600000-ffff8800367fffff] on node 0 | |
| Zone PFN ranges: | |
| DMA 0x00000010 -> 0x00001000 | |
| DMA32 0x00001000 -> 0x00100000 | |
| Normal 0x00100000 -> 0x0041f000 | |
| Movable zone start PFN for each node | |
| early_node_map[5] active PFN ranges | |
| 0: 0x00000010 -> 0x0000009f | |
| 0: 0x00000100 -> 0x000de3c8 | |
| 0: 0x000dec08 -> 0x000df4c4 | |
| 0: 0x000df7f2 -> 0x000df800 | |
| 0: 0x00100000 -> 0x0041f000 | |
| On node 0 totalpages: 4185121 | |
| DMA zone: 56 pages used for memmap | |
| DMA zone: 130 pages reserved | |
| DMA zone: 3797 pages, LIFO batch:0 | |
| DMA32 zone: 14280 pages used for memmap | |
| DMA32 zone: 894154 pages, LIFO batch:31 | |
| Normal zone: 44744 pages used for memmap | |
| Normal zone: 3227960 pages, LIFO batch:31 | |
| ACPI: PM-Timer IO Port: 0x408 | |
| ACPI: Local APIC address 0xfee00000 | |
| Setting APIC routing to flat. | |
| ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) | |
| ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) | |
| ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) | |
| ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) | |
| ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) | |
| ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) | |
| ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) | |
| ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) | |
| ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) | |
| ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) | |
| IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 | |
| ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) | |
| ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) | |
| ACPI: IRQ0 used by override. | |
| ACPI: IRQ2 used by override. | |
| ACPI: IRQ9 used by override. | |
| Using ACPI (MADT) for SMP configuration information | |
| ACPI: HPET id: 0x8086a701 base: 0xfed00000 | |
| SMP: Allowing 8 CPUs, 0 hotplug CPUs | |
| nr_irqs_gsi: 24 | |
| PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 | |
| PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 | |
| PM: Registered nosave memory: 00000000de3c8000 - 00000000de940000 | |
| PM: Registered nosave memory: 00000000de940000 - 00000000debc0000 | |
| PM: Registered nosave memory: 00000000debc0000 - 00000000debc5000 | |
| PM: Registered nosave memory: 00000000debc5000 - 00000000dec08000 | |
| PM: Registered nosave memory: 00000000df4c4000 - 00000000df7f2000 | |
| PM: Registered nosave memory: 00000000df800000 - 00000000f8000000 | |
| PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 | |
| PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 | |
| PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 | |
| PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000 | |
| PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000 | |
| PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000 | |
| PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 | |
| PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 | |
| PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 | |
| PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000 | |
| PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 | |
| Allocating PCI resources starting at df800000 (gap: df800000:18800000) | |
| Booting paravirtualized kernel on bare hardware | |
| NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 | |
| PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94872 r8192 d23912 u262144 | |
| pcpu-alloc: s94872 r8192 d23912 u262144 alloc=1*2097152 | |
| pcpu-alloc: [0] 0 1 2 3 4 5 6 7 | |
| Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4125911 | |
| Policy zone: Normal | |
| Kernel command line: ro root=/dev/mapper/vg_madball-lv_root rd_NO_LUKS KEYBOARDTYPE=pc KEYTABLE=us LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=130M@0M rd_LVM_LV=vg_madball/lv_swap rd_LVM_LV=vg_madball/lv_root rd_NO_DM rhgb quiet | |
| PID hash table entries: 4096 (order: 3, 32768 bytes) | |
| xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 | |
| Checking aperture... | |
| No AGP bridge found | |
| PCI-DMA: Using software bounce buffering for IO (SWIOTLB) | |
| Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 | |
| software IO TLB at phys 0x20000000 - 0x24000000 | |
| Memory: 16228088k/17285120k available (5326k kernel code, 544636k absent, 512396k reserved, 7012k data, 1280k init) | |
| Hierarchical RCU implementation. | |
| NR_IRQS:33024 nr_irqs:472 | |
| Extended CMOS year: 2000 | |
| Console: colour dummy device 80x25 | |
| console [tty0] enabled | |
| allocated 67108864 bytes of page_cgroup | |
| please try 'cgroup_disable=memory' option if you don't want memory cgroups | |
| hpet clockevent registered | |
| Fast TSC calibration using PIT | |
| Detected 3492.100 MHz processor. | |
| Calibrating delay loop (skipped), value calculated using timer frequency.. 6984.20 BogoMIPS (lpj=3492100) | |
| pid_max: default: 32768 minimum: 301 | |
| Security Framework initialized | |
| SELinux: Initializing. | |
| SELinux: Starting in permissive mode | |
| Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) | |
| Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) | |
| Mount-cache hash table entries: 256 | |
| Initializing cgroup subsys ns | |
| Initializing cgroup subsys cpuacct | |
| Initializing cgroup subsys memory | |
| Initializing cgroup subsys devices | |
| Initializing cgroup subsys freezer | |
| Initializing cgroup subsys net_cls | |
| Initializing cgroup subsys blkio | |
| Initializing cgroup subsys perf_event | |
| Initializing cgroup subsys net_prio | |
| CPU: Physical Processor ID: 0 | |
| CPU: Processor Core ID: 0 | |
| mce: CPU supports 9 MCE banks | |
| CPU0: Thermal monitoring enabled (TM1) | |
| using mwait in idle threads. | |
| ACPI: Core revision 20090903 | |
| ftrace: converting mcount calls to 0f 1f 44 00 00 | |
| ftrace: allocating 21777 entries in 86 pages | |
| APIC routing finalized to flat. | |
| ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 | |
| CPU0: Intel(R) Core(TM) i7-2700K CPU @ 3.50GHz stepping 07 | |
| Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver. | |
| PEBS disabled due to CPU errata. | |
| ... version: 3 | |
| ... bit width: 48 | |
| ... generic registers: 4 | |
| ... value mask: 0000ffffffffffff | |
| ... max period: 000000007fffffff | |
| ... fixed-purpose events: 3 | |
| ... event mask: 000000070000000f | |
| NMI watchdog enabled, takes one hw-pmu counter. | |
| Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok. | |
| Brought up 8 CPUs | |
| Total of 8 processors activated (55873.60 BogoMIPS). | |
| sizeof(vma)=200 bytes | |
| sizeof(page)=56 bytes | |
| sizeof(inode)=592 bytes | |
| sizeof(dentry)=192 bytes | |
| sizeof(ext3inode)=800 bytes | |
| sizeof(buffer_head)=104 bytes | |
| sizeof(skbuff)=232 bytes | |
| sizeof(task_struct)=2648 bytes | |
| devtmpfs: initialized | |
| PM: Registering ACPI NVS region at de940000 (2621440 bytes) | |
| PM: Registering ACPI NVS region at debc5000 (274432 bytes) | |
| regulator: core version 0.5 | |
| NET: Registered protocol family 16 | |
| ACPI FADT declares the system doesn't support PCIe ASPM, so disable it | |
| ACPI: bus type pci registered | |
| PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 | |
| PCI: MCFG area at f8000000 reserved in E820 | |
| PCI: Using MMCONFIG at f8000000 - fbffffff | |
| PCI: Using configuration type 1 for base access | |
| bio: create slab <bio-0> at 0 | |
| ACPI: EC: Look up EC in DSDT | |
| ACPI: Executed 1 blocks of module-level executable AML code | |
| ACPI: Interpreter enabled | |
| ACPI: (supports S0 S1 S3 S4 S5) | |
| ACPI: Using IOAPIC for interrupt routing | |
| ACPI: No dock devices found. | |
| PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug | |
| ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) | |
| pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] | |
| pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] | |
| pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] | |
| pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] | |
| pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff] | |
| PCI host bridge to bus 0000:00 | |
| pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] | |
| pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] | |
| pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] | |
| pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] | |
| pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff] | |
| pci 0000:00:01.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:01.0: PME# disabled | |
| pci 0000:00:16.0: reg 10: [mem 0xf7f0b000-0xf7f0b00f 64bit] | |
| pci 0000:00:16.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:16.0: PME# disabled | |
| pci 0000:00:1a.0: reg 10: [mem 0xf7f08000-0xf7f083ff] | |
| pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:1a.0: PME# disabled | |
| pci 0000:00:1b.0: reg 10: [mem 0xf7f00000-0xf7f03fff 64bit] | |
| pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:1b.0: PME# disabled | |
| pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:1c.0: PME# disabled | |
| pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:1c.4: PME# disabled | |
| pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:1c.5: PME# disabled | |
| pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:1c.6: PME# disabled | |
| pci 0000:00:1d.0: reg 10: [mem 0xf7f07000-0xf7f073ff] | |
| pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:1d.0: PME# disabled | |
| pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077] | |
| pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063] | |
| pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057] | |
| pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043] | |
| pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f] | |
| pci 0000:00:1f.2: reg 24: [mem 0xf7f06000-0xf7f067ff] | |
| pci 0000:00:1f.2: PME# supported from D3hot | |
| pci 0000:00:1f.2: PME# disabled | |
| pci 0000:00:1f.3: reg 10: [mem 0xf7f05000-0xf7f050ff 64bit] | |
| pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f] | |
| pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref] | |
| pci 0000:01:00.0: reg 18: [mem 0xf7e20000-0xf7e3ffff 64bit] | |
| pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff] | |
| pci 0000:01:00.0: reg 30: [mem 0xf7e00000-0xf7e1ffff pref] | |
| pci 0000:01:00.0: supports D1 D2 | |
| pci 0000:01:00.1: reg 10: [mem 0xf7e40000-0xf7e43fff 64bit] | |
| pci 0000:01:00.1: supports D1 D2 | |
| pci 0000:00:01.0: PCI bridge to [bus 01-01] | |
| pci 0000:00:01.0: bridge window [io 0xe000-0xefff] | |
| pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff] | |
| pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] | |
| pci 0000:00:1c.0: PCI bridge to [bus 02-02] | |
| pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) | |
| pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) | |
| pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) | |
| pci 0000:00:1c.4: PCI bridge to [bus 03-04] (subtractive decode) | |
| pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled) | |
| pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff] (disabled) | |
| pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) | |
| pci 0000:00:1c.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) | |
| pci 0000:00:1c.4: bridge window [io 0x0d00-0xffff] (subtractive decode) | |
| pci 0000:00:1c.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) | |
| pci 0000:00:1c.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) | |
| pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode) | |
| pci 0000:03:00.0: PCI bridge to [bus 04-04] (subtractive decode) | |
| pci 0000:03:00.0: bridge window [io 0xfff000-0x0000] (disabled) | |
| pci 0000:03:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) | |
| pci 0000:03:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) | |
| pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode) | |
| pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode) | |
| pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode) | |
| pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode) | |
| pci 0000:03:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) | |
| pci 0000:03:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode) | |
| pci 0000:03:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) | |
| pci 0000:03:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) | |
| pci 0000:03:00.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode) | |
| pci 0000:05:00.0: reg 10: [io 0xd000-0xd0ff] | |
| pci 0000:05:00.0: reg 18: [mem 0xf0004000-0xf0004fff 64bit pref] | |
| pci 0000:05:00.0: reg 20: [mem 0xf0000000-0xf0003fff 64bit pref] | |
| pci 0000:05:00.0: supports D1 D2 | |
| pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold | |
| pci 0000:05:00.0: PME# disabled | |
| pci 0000:00:1c.5: PCI bridge to [bus 05-05] | |
| pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff] | |
| pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff] (disabled) | |
| pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] | |
| pci 0000:06:00.0: reg 10: [mem 0xf7d00000-0xf7d07fff 64bit] | |
| pci 0000:06:00.0: supports D1 D2 | |
| pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold | |
| pci 0000:06:00.0: PME# disabled | |
| pci 0000:00:1c.6: PCI bridge to [bus 06-06] | |
| pci 0000:00:1c.6: bridge window [io 0xf000-0x0000] (disabled) | |
| pci 0000:00:1c.6: bridge window [mem 0xf7d00000-0xf7dfffff] | |
| pci 0000:00:1c.6: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) | |
| ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] | |
| ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] | |
| ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] | |
| ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05.PE2P._PRT] | |
| ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] | |
| ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07._PRT] | |
| ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT] | |
| pci0000:00: Requesting ACPI _OSC control (0x1d) | |
| pci0000:00: ACPI _OSC control (0x1c) granted | |
| ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. | |
| ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. | |
| ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15) | |
| vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none | |
| vgaarb: loaded | |
| vgaarb: bridge control possible 0000:01:00.0 | |
| SCSI subsystem initialized | |
| libata version 3.00 loaded. | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| PCI: Using ACPI for IRQ routing | |
| PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64 | |
| PCI: pci_cache_line_size set to 64 bytes | |
| NetLabel: Initializing | |
| NetLabel: domain hash size = 128 | |
| NetLabel: protocols = UNLABELED CIPSOv4 | |
| NetLabel: unlabeled traffic allowed by default | |
| alloc irq_desc for 24 on node 0 | |
| alloc kstat_irqs on node 0 | |
| alloc irq_desc for 25 on node 0 | |
| alloc kstat_irqs on node 0 | |
| alloc irq_desc for 26 on node 0 | |
| alloc kstat_irqs on node 0 | |
| alloc irq_desc for 27 on node 0 | |
| alloc kstat_irqs on node 0 | |
| alloc irq_desc for 28 on node 0 | |
| alloc kstat_irqs on node 0 | |
| HPET: 8 timers in total, 5 timers will be used for per-cpu timer | |
| hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0 | |
| hpet0: 8 comparators, 64-bit 14.318180 MHz counter | |
| hpet: hpet2 irq 24 for MSI | |
| hpet: hpet3 irq 25 for MSI | |
| hpet: hpet4 irq 26 for MSI | |
| hpet: hpet5 irq 27 for MSI | |
| hpet: hpet6 irq 28 for MSI | |
| Switching to clocksource hpet | |
| pnp: PnP ACPI init | |
| ACPI: bus type pnp registered | |
| pnp 00:00: [io 0x0cf8-0x0cff] | |
| pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) | |
| pnp 00:01: [mem 0xfed40000-0xfed44fff] | |
| pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) | |
| pnp 00:02: [io 0x0000-0x001f] | |
| pnp 00:02: [io 0x0081-0x0091] | |
| pnp 00:02: [io 0x0093-0x009f] | |
| pnp 00:02: [io 0x00c0-0x00df] | |
| pnp 00:02: [dma 4] | |
| pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) | |
| pnp 00:03: [mem 0xff000000-0xffffffff] | |
| pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active) | |
| pnp 00:04: [mem 0xfed00000-0xfed003ff] | |
| pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) | |
| pnp 00:05: [io 0x002e-0x002f] | |
| pnp 00:05: [io 0x004e-0x004f] | |
| pnp 00:05: [io 0x0061] | |
| pnp 00:05: [io 0x0063] | |
| pnp 00:05: [io 0x0065] | |
| pnp 00:05: [io 0x0067] | |
| pnp 00:05: [io 0x0070] | |
| pnp 00:05: [io 0x0080] | |
| pnp 00:05: [io 0x0092] | |
| pnp 00:05: [io 0x00b2-0x00b3] | |
| pnp 00:05: [io 0x0680-0x069f] | |
| pnp 00:05: [io 0x0200-0x020f] | |
| pnp 00:05: [io 0xffff] | |
| pnp 00:05: [io 0xffff] | |
| pnp 00:05: [io 0x0400-0x0453] | |
| pnp 00:05: [io 0x0458-0x047f] | |
| pnp 00:05: [io 0x0500-0x057f] | |
| pnp 00:05: [io 0x164e-0x164f] | |
| pnp 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| pnp 00:06: [io 0x0070-0x0077] | |
| pnp 00:06: [irq 8] | |
| pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) | |
| pnp 00:07: [io 0x0454-0x0457] | |
| pnp 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) | |
| pnp 00:08: [io 0x0000-0xffffffffffffffff disabled] | |
| pnp 00:08: [io 0x0290-0x029f] | |
| pnp 00:08: [io 0x0000-0xffffffffffffffff disabled] | |
| pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| pnp 00:09: [io 0x0010-0x001f] | |
| pnp 00:09: [io 0x0022-0x003f] | |
| pnp 00:09: [io 0x0044-0x005f] | |
| pnp 00:09: [io 0x0062-0x0063] | |
| pnp 00:09: [io 0x0065-0x006f] | |
| pnp 00:09: [io 0x0072-0x007f] | |
| pnp 00:09: [io 0x0080] | |
| pnp 00:09: [io 0x0084-0x0086] | |
| pnp 00:09: [io 0x0088] | |
| pnp 00:09: [io 0x008c-0x008e] | |
| pnp 00:09: [io 0x0090-0x009f] | |
| pnp 00:09: [io 0x00a2-0x00bf] | |
| pnp 00:09: [io 0x00e0-0x00ef] | |
| pnp 00:09: [io 0x04d0-0x04d1] | |
| pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| pnp 00:0a: [io 0x00f0-0x00ff] | |
| pnp 00:0a: [irq 13] | |
| pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active) | |
| pnp 00:0b: [io 0x0060] | |
| pnp 00:0b: [io 0x0064] | |
| pnp 00:0b: [irq 1] | |
| pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) | |
| pnp 00:0c: [io 0x03f8-0x03ff] | |
| pnp 00:0c: [irq 4] | |
| pnp 00:0c: [dma 0 disabled] | |
| pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active) | |
| pnp 00:0d: [mem 0xfed1c000-0xfed1ffff] | |
| pnp 00:0d: [mem 0xfed10000-0xfed17fff] | |
| pnp 00:0d: [mem 0xfed18000-0xfed18fff] | |
| pnp 00:0d: [mem 0xfed19000-0xfed19fff] | |
| pnp 00:0d: [mem 0xf8000000-0xfbffffff] | |
| pnp 00:0d: [mem 0xfed20000-0xfed3ffff] | |
| pnp 00:0d: [mem 0xfed90000-0xfed93fff] | |
| pnp 00:0d: [mem 0xfed45000-0xfed8ffff] | |
| pnp 00:0d: [mem 0xff000000-0xffffffff] | |
| pnp 00:0d: [mem 0xfee00000-0xfeefffff] | |
| pnp 00:0d: [mem 0xf0100000-0xf0100fff] | |
| pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| pnp: PnP ACPI: found 14 devices | |
| ACPI: ACPI bus type pnp unregistered | |
| system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved | |
| system 00:05: [io 0x0680-0x069f] has been reserved | |
| system 00:05: [io 0x0200-0x020f] has been reserved | |
| system 00:05: [io 0xffff] has been reserved | |
| system 00:05: [io 0xffff] has been reserved | |
| system 00:05: [io 0x0400-0x0453] has been reserved | |
| system 00:05: [io 0x0458-0x047f] has been reserved | |
| system 00:05: [io 0x0500-0x057f] has been reserved | |
| system 00:05: [io 0x164e-0x164f] has been reserved | |
| system 00:07: [io 0x0454-0x0457] has been reserved | |
| system 00:08: [io 0x0290-0x029f] has been reserved | |
| system 00:09: [io 0x04d0-0x04d1] has been reserved | |
| system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved | |
| system 00:0d: [mem 0xfed10000-0xfed17fff] has been reserved | |
| system 00:0d: [mem 0xfed18000-0xfed18fff] has been reserved | |
| system 00:0d: [mem 0xfed19000-0xfed19fff] has been reserved | |
| system 00:0d: [mem 0xf8000000-0xfbffffff] has been reserved | |
| system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved | |
| system 00:0d: [mem 0xfed90000-0xfed93fff] has been reserved | |
| system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved | |
| system 00:0d: [mem 0xff000000-0xffffffff] has been reserved | |
| system 00:0d: [mem 0xfee00000-0xfeefffff] could not be reserved | |
| system 00:0d: [mem 0xf0100000-0xf0100fff] has been reserved | |
| PCI: max bus depth: 2 pci_try_num: 3 | |
| pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0200000-0xf03fffff] | |
| pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref] | |
| pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] | |
| pci 0000:00:01.0: PCI bridge to [bus 01-01] | |
| pci 0000:00:01.0: PCI bridge to [bus 01-01] | |
| pci 0000:00:01.0: bridge window [io 0xe000-0xefff] | |
| pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff] | |
| pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] | |
| pci 0000:00:1c.0: PCI bridge to [bus 02-02] | |
| pci 0000:00:1c.0: PCI bridge to [bus 02-02] | |
| pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] | |
| pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff] | |
| pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf05fffff 64bit pref] | |
| pci 0000:03:00.0: PCI bridge to [bus 04-04] | |
| pci 0000:03:00.0: PCI bridge to [bus 04-04] | |
| pci 0000:03:00.0: bridge window [io disabled] | |
| pci 0000:03:00.0: bridge window [mem disabled] | |
| pci 0000:03:00.0: bridge window [mem pref disabled] | |
| pci 0000:00:1c.4: PCI bridge to [bus 03-04] | |
| pci 0000:00:1c.4: PCI bridge to [bus 03-04] | |
| pci 0000:00:1c.4: bridge window [io disabled] | |
| pci 0000:00:1c.4: bridge window [mem disabled] | |
| pci 0000:00:1c.4: bridge window [mem pref disabled] | |
| pci 0000:00:1c.5: PCI bridge to [bus 05-05] | |
| pci 0000:00:1c.5: PCI bridge to [bus 05-05] | |
| pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff] | |
| pci 0000:00:1c.5: bridge window [mem disabled] | |
| pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] | |
| pci 0000:00:1c.6: PCI bridge to [bus 06-06] | |
| pci 0000:00:1c.6: PCI bridge to [bus 06-06] | |
| pci 0000:00:1c.6: bridge window [io disabled] | |
| pci 0000:00:1c.6: bridge window [mem 0xf7d00000-0xf7dfffff] | |
| pci 0000:00:1c.6: bridge window [mem pref disabled] | |
| alloc irq_desc for 16 on node -1 | |
| alloc kstat_irqs on node -1 | |
| pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 | |
| pci 0000:00:01.0: setting latency timer to 64 | |
| pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 | |
| pci 0000:00:1c.0: setting latency timer to 64 | |
| pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 | |
| pci 0000:00:1c.4: setting latency timer to 64 | |
| pci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 | |
| pci 0000:03:00.0: setting latency timer to 64 | |
| alloc irq_desc for 17 on node -1 | |
| alloc kstat_irqs on node -1 | |
| pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 | |
| pci 0000:00:1c.5: setting latency timer to 64 | |
| alloc irq_desc for 18 on node -1 | |
| alloc kstat_irqs on node -1 | |
| pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 | |
| pci 0000:00:1c.6: setting latency timer to 64 | |
| pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] | |
| pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] | |
| pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] | |
| pci_bus 0000:00: resource 7 [mem 0x000dc000-0x000dffff] | |
| pci_bus 0000:00: resource 8 [mem 0xe0000000-0xfeafffff] | |
| pci_bus 0000:01: resource 0 [io 0xe000-0xefff] | |
| pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff] | |
| pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] | |
| pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] | |
| pci_bus 0000:02: resource 1 [mem 0xf0200000-0xf03fffff] | |
| pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref] | |
| pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] | |
| pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] | |
| pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] | |
| pci_bus 0000:03: resource 7 [mem 0x000dc000-0x000dffff] | |
| pci_bus 0000:03: resource 8 [mem 0xe0000000-0xfeafffff] | |
| pci_bus 0000:04: resource 8 [io 0x0000-0x0cf7] | |
| pci_bus 0000:04: resource 9 [io 0x0d00-0xffff] | |
| pci_bus 0000:04: resource 10 [mem 0x000a0000-0x000bffff] | |
| pci_bus 0000:04: resource 11 [mem 0x000dc000-0x000dffff] | |
| pci_bus 0000:04: resource 12 [mem 0xe0000000-0xfeafffff] | |
| pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] | |
| pci_bus 0000:05: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] | |
| pci_bus 0000:06: resource 1 [mem 0xf7d00000-0xf7dfffff] | |
| NET: Registered protocol family 2 | |
| IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) | |
| TCP established hash table entries: 524288 (order: 11, 8388608 bytes) | |
| TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) | |
| TCP: Hash tables configured (established 524288 bind 65536) | |
| TCP reno registered | |
| NET: Registered protocol family 1 | |
| pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 | |
| pci 0000:00:1a.0: PCI INT A disabled | |
| alloc irq_desc for 23 on node -1 | |
| alloc kstat_irqs on node -1 | |
| pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 | |
| pci 0000:00:1d.0: PCI INT A disabled | |
| pci 0000:01:00.0: Boot video device | |
| pci 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 | |
| pci 0000:06:00.0: PCI INT A disabled | |
| Trying to unpack rootfs image as initramfs... | |
| Freeing initrd memory: 16715k freed | |
| audit: initializing netlink socket (disabled) | |
| type=2000 audit(1395814507.334:1): initialized | |
| HugeTLB registered 2 MB page size, pre-allocated 0 pages | |
| VFS: Disk quotas dquot_6.5.2 | |
| Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| msgmni has been set to 31819 | |
| SELinux: Registering netfilter hooks | |
| alg: No test for stdrng (krng) | |
| ksign: Installing public key data | |
| Loading keyring | |
| - Added public key 3BC36F007EF7D4EA | |
| - User ID: CentOS (Kernel Module GPG key) | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) | |
| io scheduler noop registered | |
| io scheduler anticipatory registered | |
| io scheduler deadline registered | |
| io scheduler cfq registered (default) | |
| pcieport 0000:00:01.0: setting latency timer to 64 | |
| alloc irq_desc for 29 on node -1 | |
| alloc kstat_irqs on node -1 | |
| pcieport 0000:00:01.0: irq 29 for MSI/MSI-X | |
| pcieport 0000:00:1c.0: setting latency timer to 64 | |
| alloc irq_desc for 30 on node -1 | |
| alloc kstat_irqs on node -1 | |
| pcieport 0000:00:1c.0: irq 30 for MSI/MSI-X | |
| pcieport 0000:00:1c.5: setting latency timer to 64 | |
| alloc irq_desc for 31 on node -1 | |
| alloc kstat_irqs on node -1 | |
| pcieport 0000:00:1c.5: irq 31 for MSI/MSI-X | |
| pcieport 0000:00:1c.6: setting latency timer to 64 | |
| alloc irq_desc for 32 on node -1 | |
| alloc kstat_irqs on node -1 | |
| pcieport 0000:00:1c.6: irq 32 for MSI/MSI-X | |
| pci_hotplug: PCI Hot Plug PCI Core version: 0.5 | |
| pciehp: PCI Express Hot Plug Controller Driver version: 0.4 | |
| acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 | |
| efifb: probing for efifb | |
| efifb: framebuffer at 0xe0000000, mapped to 0xffffc9000b700000, using 11552k, total 16384k | |
| efifb: mode is 1400x1050x32, linelength=5632, pages=1 | |
| efifb: scrolling: redraw | |
| efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 | |
| Console: switching to colour frame buffer device 175x65 | |
| fb0: EFI VGA frame buffer device | |
| intel_idle: MWAIT substates: 0x1120 | |
| intel_idle: v0.4 model 0x2A | |
| intel_idle: lapic_timer_reliable_states 0xffffffff | |
| ipmi message handler version 39.2 | |
| IPMI System Interface driver. | |
| ipmi_si: Adding default-specified kcs state machine | |
| ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 | |
| ipmi_si: Interface detection failed | |
| ipmi_si: Adding default-specified smic state machine | |
| ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 | |
| ipmi_si: Interface detection failed | |
| ipmi_si: Adding default-specified bt state machine | |
| ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 | |
| ipmi_si: Interface detection failed | |
| ipmi_si: Unable to find any System Interface(s) | |
| input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 | |
| ACPI: Power Button [PWRB] | |
| input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 | |
| ACPI: Power Button [PWRF] | |
| ACPI: acpi_idle yielding to intel_idleACPI: SSDT 00000000de8ed018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) | |
| ACPI: SSDT 00000000de8eea98 00303 (v01 PmRef ApIst 00003000 INTL 20051117) | |
| ACPI: SSDT 00000000de8efc18 00119 (v01 PmRef ApCst 00003000 INTL 20051117) | |
| ACPI Exception: AE_NOT_FOUND, No or invalid critical threshold (20090903/thermal-386) | |
| GHES: HEST is not enabled! | |
| Non-volatile memory driver v1.3 | |
| Linux agpgart interface v0.103 | |
| crash memory driver: version 1.1 | |
| Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
| serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A | |
| 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A | |
| brd: module loaded | |
| loop: module loaded | |
| input: Macintosh mouse button emulation as /devices/virtual/input/input2 | |
| Fixed MDIO Bus: probed | |
| ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 | |
| ehci_hcd 0000:00:1a.0: setting latency timer to 64 | |
| ehci_hcd 0000:00:1a.0: EHCI Host Controller | |
| ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 | |
| ehci_hcd 0000:00:1a.0: debug port 2 | |
| ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported | |
| ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7f08000 | |
| ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 | |
| usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb1: Product: EHCI Host Controller | |
| usb usb1: Manufacturer: Linux 2.6.32-431.11.2.el6.x86_64 ehci_hcd | |
| usb usb1: SerialNumber: 0000:00:1a.0 | |
| usb usb1: configuration #1 chosen from 1 choice | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 2 ports detected | |
| ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 | |
| ehci_hcd 0000:00:1d.0: setting latency timer to 64 | |
| ehci_hcd 0000:00:1d.0: EHCI Host Controller | |
| ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 | |
| ehci_hcd 0000:00:1d.0: debug port 2 | |
| ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported | |
| ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7f07000 | |
| ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 | |
| usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb2: Product: EHCI Host Controller | |
| usb usb2: Manufacturer: Linux 2.6.32-431.11.2.el6.x86_64 ehci_hcd | |
| usb usb2: SerialNumber: 0000:00:1d.0 | |
| usb usb2: configuration #1 chosen from 1 choice | |
| hub 2-0:1.0: USB hub found | |
| hub 2-0:1.0: 2 ports detected | |
| ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| uhci_hcd: USB Universal Host Controller Interface driver | |
| PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 | |
| PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp | |
| serio: i8042 KBD port at 0x60,0x64 irq 1 | |
| mice: PS/2 mouse device common for all mice | |
| rtc_cmos 00:06: RTC can wake from S4 | |
| rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 | |
| rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs | |
| cpuidle: using governor ladder | |
| cpuidle: using governor menu | |
| EFI Variables Facility v0.08 2004-May-17 | |
| input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 | |
| usbcore: registered new interface driver hiddev | |
| usbcore: registered new interface driver usbhid | |
| usbhid: v2.6:USB HID core driver | |
| GRE over IPv4 demultiplexor driver | |
| TCP cubic registered | |
| Initializing XFRM netlink socket | |
| NET: Registered protocol family 17 | |
| registered taskstats version 1 | |
| rtc_cmos 00:06: setting system clock to 2014-03-26 06:15:08 UTC (1395814508) | |
| Initalizing network drop monitor service | |
| Freeing unused kernel memory: 1280k freed | |
| Write protecting the kernel read-only data: 10240k | |
| Freeing unused kernel memory: 800k freed | |
| Freeing unused kernel memory: 1584k freed | |
| dracut: dracut-004-336.el6_5.2 | |
| dracut: rd_NO_LUKS: removing cryptoluks activation | |
| device-mapper: uevent: version 1.0.3 | |
| device-mapper: ioctl: 4.24.6-ioctl (2013-01-15) initialised: [email protected] | |
| udev: starting version 147 | |
| [drm] Initialized drm 1.1.0 20060810 | |
| [drm] radeon kernel modesetting enabled. | |
| checking generic (e0000000 b48000) vs hw (e0000000 10000000) | |
| fb: conflicting fb hw usage radeondrmfb vs EFI VGA - removing generic driver | |
| Console: switching to colour dummy device 80x25 | |
| radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 | |
| [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68BA 0x1787:0x200A). | |
| [drm] register mmio base: 0xF7E20000 | |
| [drm] register mmio size: 131072 | |
| ATOM BIOS: JUNIPER | |
| radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) | |
| radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF | |
| [drm] Detected VRAM RAM=1024M, BAR=256M | |
| [drm] RAM width 128bits DDR | |
| [TTM] Zone kernel: Available graphics memory: 8147704 kiB | |
| [TTM] Zone dma32: Available graphics memory: 2097152 kiB | |
| [TTM] Initializing pool allocator | |
| [TTM] Initializing DMA pool allocator | |
| [drm] radeon: 1024M of VRAM memory ready | |
| [drm] radeon: 512M of GTT memory ready. | |
| [drm] GART: num cpu pages 131072, num gpu pages 131072 | |
| [drm] Loading JUNIPER Microcode | |
| platform radeon_cp.0: firmware: requesting radeon/JUNIPER_pfp.bin | |
| platform radeon_cp.0: firmware: requesting radeon/JUNIPER_me.bin | |
| platform radeon_cp.0: firmware: requesting radeon/JUNIPER_rlc.bin | |
| [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). | |
| radeon 0000:01:00.0: WB enabled | |
| radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880413454c00 | |
| radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880413454c0c | |
| [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). | |
| [drm] Driver supports precise vblank timestamp query. | |
| alloc irq_desc for 33 on node -1 | |
| alloc kstat_irqs on node -1 | |
| radeon 0000:01:00.0: irq 33 for MSI/MSI-X | |
| radeon 0000:01:00.0: radeon: using MSI. | |
| [drm] radeon: irq initialized. | |
| radeon 0000:01:00.0: setting latency timer to 64 | |
| [drm] ring test on 0 succeeded in 0 usecs | |
| [drm] ring test on 3 succeeded in 1 usecs | |
| [drm] ib test on ring 0 succeeded in 0 usecs | |
| [drm] ib test on ring 3 succeeded in 0 usecs | |
| [drm] Radeon Display Connectors | |
| [drm] Connector 0: | |
| [drm] DP-1 | |
| [drm] HPD4 | |
| [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c | |
| [drm] Encoders: | |
| [drm] DFP1: INTERNAL_UNIPHY2 | |
| [drm] Connector 1: | |
| [drm] HDMI-A-1 | |
| [drm] HPD5 | |
| [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c | |
| [drm] Encoders: | |
| [drm] DFP2: INTERNAL_UNIPHY2 | |
| [drm] Connector 2: | |
| [drm] DVI-I-1 | |
| [drm] HPD1 | |
| [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c | |
| [drm] Encoders: | |
| [drm] DFP3: INTERNAL_UNIPHY1 | |
| [drm] CRT2: INTERNAL_KLDSCP_DAC2 | |
| [drm] Connector 3: | |
| [drm] DVI-I-2 | |
| [drm] HPD6 | |
| [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c | |
| [drm] Encoders: | |
| [drm] DFP4: INTERNAL_UNIPHY | |
| [drm] CRT1: INTERNAL_KLDSCP_DAC1 | |
| [drm] Internal thermal controller with fan control | |
| [drm] radeon: power management initialized | |
| [drm] fb mappable at 0xE0142000 | |
| [drm] vram apper at 0xE0000000 | |
| [drm] size 5242880 | |
| [drm] fb depth is 24 | |
| [drm] pitch is 5120 | |
| fbcon: radeondrmfb (fb0) is primary device | |
| usb 1-1: new high speed USB device number 2 using ehci_hcd | |
| usb 1-1: New USB device found, idVendor=8087, idProduct=0024 | |
| usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | |
| usb 1-1: configuration #1 chosen from 1 choice | |
| hub 1-1:1.0: USB hub found | |
| hub 1-1:1.0: 6 ports detected | |
| Console: switching to colour frame buffer device 160x64 | |
| radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device | |
| radeon 0000:01:00.0: registered panic notifier | |
| Slow work thread pool: Starting up | |
| Slow work thread pool: Ready | |
| [drm] Initialized radeon 2.30.0 20080528 for 0000:01:00.0 on minor 0 | |
| dracut: Starting plymouth daemon | |
| usb 2-1: new high speed USB device number 2 using ehci_hcd | |
| dracut: rd_NO_DM: removing DM RAID activation | |
| dracut: rd_NO_MD: removing MD RAID activation | |
| Refined TSC clocksource calibration: 3492.067 MHz. | |
| Switching to clocksource tsc | |
| xhci_hcd 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 | |
| xhci_hcd 0000:06:00.0: setting latency timer to 64 | |
| xhci_hcd 0000:06:00.0: xHCI Host Controller | |
| xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 3 | |
| alloc irq_desc for 34 on node -1 | |
| alloc kstat_irqs on node -1 | |
| xhci_hcd 0000:06:00.0: irq 34 for MSI/MSI-X | |
| usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb3: Product: xHCI Host Controller | |
| usb usb3: Manufacturer: Linux 2.6.32-431.11.2.el6.x86_64 xhci_hcd | |
| usb usb3: SerialNumber: 0000:06:00.0 | |
| usb usb3: configuration #1 chosen from 1 choice | |
| xHCI xhci_add_endpoint called for root hub | |
| xHCI xhci_check_bandwidth called for root hub | |
| hub 3-0:1.0: USB hub found | |
| hub 3-0:1.0: 2 ports detected | |
| xhci_hcd 0000:06:00.0: xHCI Host Controller | |
| xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 4 | |
| usb usb4: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor | |
| usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 | |
| usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb4: Product: xHCI Host Controller | |
| usb usb4: Manufacturer: Linux 2.6.32-431.11.2.el6.x86_64 xhci_hcd | |
| usb usb4: SerialNumber: 0000:06:00.0 | |
| usb usb4: configuration #1 chosen from 1 choice | |
| xHCI xhci_add_endpoint called for root hub | |
| xHCI xhci_check_bandwidth called for root hub | |
| hub 4-0:1.0: USB hub found | |
| hub 4-0:1.0: 2 ports detected | |
| ahci 0000:00:1f.2: version 3.0 | |
| alloc irq_desc for 19 on node -1 | |
| alloc kstat_irqs on node -1 | |
| ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 | |
| alloc irq_desc for 35 on node -1 | |
| alloc kstat_irqs on node -1 | |
| ahci 0000:00:1f.2: irq 35 for MSI/MSI-X | |
| usb 2-1: New USB device found, idVendor=8087, idProduct=0024 | |
| usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | |
| usb 2-1: configuration #1 chosen from 1 choice | |
| hub 2-1:1.0: USB hub found | |
| hub 2-1:1.0: 8 ports detected | |
| ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl RAID mode | |
| ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst | |
| ahci 0000:00:1f.2: setting latency timer to 64 | |
| scsi0 : ahci | |
| scsi1 : ahci | |
| scsi2 : ahci | |
| scsi3 : ahci | |
| scsi4 : ahci | |
| scsi5 : ahci | |
| ata1: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06100 irq 35 | |
| ata2: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06180 irq 35 | |
| ata3: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06200 irq 35 | |
| ata4: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06280 irq 35 | |
| ata5: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06300 irq 35 | |
| ata6: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06380 irq 35 | |
| hub 2-1:1.0: over-current change on port 7 | |
| hub 2-1:1.0: over-current change on port 8 | |
| ata3: SATA link down (SStatus 0 SControl 300) | |
| ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) | |
| ata4: SATA link down (SStatus 0 SControl 300) | |
| ata6: SATA link down (SStatus 0 SControl 300) | |
| ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) | |
| ata2: SATA link down (SStatus 0 SControl 300) | |
| ata1.00: ACPI _SDD failed (AE 0x5) | |
| ata5.00: ACPI _SDD failed (AE 0x5) | |
| ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) | |
| ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) | |
| ata1.00: ACPI _SDD failed (AE 0x5) | |
| ata1.00: ACPI: failed the second time, disabled | |
| ata5.00: ACPI _SDD failed (AE 0x5) | |
| ata5.00: ACPI: failed the second time, disabled | |
| ata5.00: ATAPI: HL-DT-ST DVDRAM GH24NS70, GN00, max UDMA/100, ATAPI AN | |
| ata5.00: configured for UDMA/100 | |
| ata1.00: ATA-7: ST3750640AS, 3.ADG, max UDMA/133 | |
| ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32) | |
| ata1.00: configured for UDMA/133 | |
| scsi 0:0:0:0: Direct-Access ATA ST3750640AS 3.AD PQ: 0 ANSI: 5 | |
| scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NS70 GN00 PQ: 0 ANSI: 5 | |
| sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) | |
| sd 0:0:0:0: [sda] Write Protect is off | |
| sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 | |
| sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
| sda: sda1 sda2 sda3 | |
| sd 0:0:0:0: [sda] Attached SCSI disk | |
| sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray | |
| Uniform CD-ROM driver Revision: 3.20 | |
| sr 4:0:0:0: Attached scsi CD-ROM sr0 | |
| dracut: Scanning devices sda3 for LVM logical volumes vg_madball/lv_swap vg_madball/lv_root | |
| dracut: inactive '/dev/vg_madball/lv_root' [50.00 GiB] inherit | |
| dracut: inactive '/dev/vg_madball/lv_home' [640.11 GiB] inherit | |
| dracut: inactive '/dev/vg_madball/lv_swap' [7.84 GiB] inherit | |
| EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: | |
| dracut: Mounted root filesystem /dev/mapper/vg_madball-lv_root | |
| SELinux: Disabled at runtime. | |
| SELinux: Unregistering netfilter hooks | |
| type=1404 audit(1395814515.860:2): selinux=0 auid=4294967295 ses=4294967295 | |
| dracut: | |
| dracut: Switching root | |
| udev: starting version 147 | |
| snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) | |
| alloc irq_desc for 22 on node -1 | |
| alloc kstat_irqs on node -1 | |
| snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 | |
| alloc irq_desc for 36 on node -1 | |
| alloc kstat_irqs on node -1 | |
| snd_hda_intel 0000:00:1b.0: irq 36 for MSI/MSI-X | |
| snd_hda_intel 0000:00:1b.0: setting latency timer to 64 | |
| input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 | |
| input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 | |
| input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 | |
| input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 | |
| input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 | |
| input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 | |
| input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 | |
| snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002) | |
| snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 | |
| hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client | |
| alloc irq_desc for 37 on node -1 | |
| alloc kstat_irqs on node -1 | |
| snd_hda_intel 0000:01:00.1: irq 37 for MSI/MSI-X | |
| snd_hda_intel 0000:01:00.1: setting latency timer to 64 | |
| input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11 | |
| r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded | |
| r8169 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 | |
| r8169 0000:05:00.0: setting latency timer to 64 | |
| alloc irq_desc for 38 on node -1 | |
| alloc kstat_irqs on node -1 | |
| r8169 0000:05:00.0: irq 38 for MSI/MSI-X | |
| r8169 0000:05:00.0: eth0: RTL8168evl/8111evl at 0xffffc900040a2000, bc:5f:f4:xx:xx:xx, XID 0c900800 IRQ 38 | |
| r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] | |
| ACPI: resource (null) [io 0x0428-0x042f] conflicts with ACPI region PMIO [io 0x400-0x47f] | |
| ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver | |
| ACPI: resource (null) [io 0x0500-0x057f] conflicts with ACPI region GPR2 [io 0x500-0x57f] | |
| ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver | |
| lpc_ich: Resource conflict(s) found affecting gpio_ich | |
| sd 0:0:0:0: Attached scsi generic sg0 type 0 | |
| sr 4:0:0:0: Attached scsi generic sg1 type 5 | |
| i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 | |
| ACPI: resource 0000:00:1f.3 [io 0xf000-0xf01f] conflicts with ACPI region SMBI [io 0xf000-0xf00f] | |
| ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver | |
| microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x25 | |
| platform microcode: firmware: requesting intel-ucode/06-2a-07 | |
| microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x25 | |
| platform microcode: firmware: requesting intel-ucode/06-2a-07 | |
| microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x25 | |
| platform microcode: firmware: requesting intel-ucode/06-2a-07 | |
| microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x25 | |
| platform microcode: firmware: requesting intel-ucode/06-2a-07 | |
| microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x25 | |
| platform microcode: firmware: requesting intel-ucode/06-2a-07 | |
| microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x25 | |
| platform microcode: firmware: requesting intel-ucode/06-2a-07 | |
| microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x25 | |
| platform microcode: firmware: requesting intel-ucode/06-2a-07 | |
| microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x25 | |
| platform microcode: firmware: requesting intel-ucode/06-2a-07 | |
| Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba | |
| iTCO_vendor_support: vendor-support=0 | |
| iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh | |
| iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) | |
| iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) | |
| microcode: CPU0 updated to revision 0x29, date = 2013-06-12 | |
| microcode: CPU1 updated to revision 0x29, date = 2013-06-12 | |
| microcode: CPU2 updated to revision 0x29, date = 2013-06-12 | |
| microcode: CPU3 updated to revision 0x29, date = 2013-06-12 | |
| microcode: CPU4 updated to revision 0x29, date = 2013-06-12 | |
| microcode: CPU5 updated to revision 0x29, date = 2013-06-12 | |
| microcode: CPU6 updated to revision 0x29, date = 2013-06-12 | |
| microcode: CPU7 updated to revision 0x29, date = 2013-06-12 | |
| EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: | |
| EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: | |
| Adding 8216568k swap on /dev/mapper/vg_madball-lv_swap. Priority:-1 extents:1 across:8216568k | |
| NET: Registered protocol family 10 | |
| lo: Disabled Privacy Extensions | |
| ip6_tables: (C) 2000-2006 Netfilter Core Team | |
| nf_conntrack version 0.5.0 (16384 buckets, 65536 max) | |
| ip_tables: (C) 2000-2006 Netfilter Core Team | |
| r8169 0000:05:00.0: firmware: requesting rtl_nic/rtl8168e-3.fw | |
| r8169 0000:05:00.0: eth0: link down | |
| ADDRCONF(NETDEV_UP): eth0: link is not ready | |
| r8169 0000:05:00.0: eth0: link up | |
| ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
| eth0: no IPv6 routers present | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment