Skip to content

Instantly share code, notes, and snippets.

@tomari

tomari/frnh70.txt

Created February 23, 2015 12:45
Show Gist options
  • Save tomari/cfd13cad9babb5d24d12 to your computer and use it in GitHub Desktop.
Save tomari/cfd13cad9babb5d24d12 to your computer and use it in GitHub Desktop.
Download ZIP
フロンティア神代/KOUZIRO TW7 EAA-89 FRNH70
Raw
frnh70.txt
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz
stepping : 13
microcode : 0xa4
cpu MHz : 800.000
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida dtherm tpr_shadow vnmi flexpriority
bogomips : 3990.14
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz
stepping : 13
microcode : 0xa4
cpu MHz : 800.000
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida dtherm tpr_shadow vnmi flexpriority
bogomips : 3990.14
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
-[0000:00]-+-00.0 Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00]
+-01.0-[01]----00.0 NVIDIA Corporation G86M [GeForce 8400M GS] [10de:0427]
+-1a.0 Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834]
+-1a.1 Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835]
+-1a.7 Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a]
+-1b.0 Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b]
+-1c.0-[02-03]----00.0 Broadcom Corporation BCM4321 802.11a/b/g/n [14e4:4328]
+-1c.1-[04-05]----00.0 Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363]
+-1c.2-[06-07]--
+-1c.5-[08-09]--
+-1d.0 Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830]
+-1d.1 Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831]
+-1d.2 Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832]
+-1d.7 Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836]
+-1e.0-[0b-0f]--+-09.0 Texas Instruments PCIxx12 Cardbus Controller [104c:8039]
| +-09.1 Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller [104c:803a]
| +-09.2 Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b]
| \-09.3 Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller [104c:803c]
+-1f.0 Intel Corporation 82801HM (ICH8M) LPC Interface Controller [8086:2815]
+-1f.1 Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850]
+-1f.2 Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] [8086:2829]
\-1f.3 Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e]
/proc/interrupts
CPU0 CPU1
0: 11598 12630 IO-APIC-edge timer
1: 6 4 IO-APIC-edge i8042
8: 1 0 IO-APIC-edge rtc0
9: 118 113 IO-APIC-fasteoi acpi
12: 79 84 IO-APIC-edge i8042
14: 251 242 IO-APIC-edge ata_piix
15: 0 0 IO-APIC-edge ata_piix
16: 4 2 IO-APIC-fasteoi uhci_hcd:usb3, nouveau
18: 0 0 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb7
19: 0 0 IO-APIC-fasteoi uhci_hcd:usb6
20: 0 1 IO-APIC-fasteoi yenta, tifm_7xx1, mmc0
21: 1 1 IO-APIC-fasteoi uhci_hcd:usb4, firewire_ohci
23: 10 16 IO-APIC-fasteoi ehci_hcd:usb2, uhci_hcd:usb5
45: 3030 0 PCI-MSI-edge enp4s0
46: 4741 4661 PCI-MSI-edge ahci
47: 127 129 PCI-MSI-edge snd_hda_intel
NMI: 19 31 Non-maskable interrupts
LOC: 26087 97563 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 19 31 Performance monitoring interrupts
IWI: 1294 1455 IRQ work interrupts
RTR: 0 0 APIC ICR read retries
RES: 7449 7527 Rescheduling interrupts
CAL: 514 546 Function call interrupts
TLB: 21 13 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 2 2 Machine check polls
ERR: 0
MIS: 0
/proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0062-0062 : EC data
0064-0064 : keyboard
0066-0066 : EC cmd
0070-0077 : rtc0
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:1f.1
0170-0177 : ata_piix
01f0-01f7 : 0000:00:1f.1
01f0-01f7 : ata_piix
0376-0376 : 0000:00:1f.1
0376-0376 : ata_piix
0380-0387 : pnp 00:05
03c0-03df : vga+
03f6-03f6 : 0000:00:1f.1
03f6-03f6 : ata_piix
0680-069f : pnp 00:05
06a0-06af : pnp 00:06
06b0-06ff : pnp 00:06
0800-080f : pnp 00:05
0cf8-0cff : PCI conf1
1000-1003 : ACPI PM1a_EVT_BLK
1004-1005 : ACPI PM1a_CNT_BLK
1008-100b : ACPI PM_TMR
1010-1015 : ACPI CPU throttle
1020-1020 : ACPI PM2_CNT_BLK
1028-102f : ACPI GPE0_BLK
1030-1033 : iTCO_wdt
1030-1033 : iTCO_wdt
1060-107f : iTCO_wdt
1060-107f : iTCO_wdt
1180-11bf : 0000:00:1f.0
1180-11bf : pnp 00:05
1640-164f : pnp 00:05
1800-181f : 0000:00:1a.0
1800-181f : uhci_hcd
1820-183f : 0000:00:1a.1
1820-183f : uhci_hcd
1840-185f : 0000:00:1d.0
1840-185f : uhci_hcd
1860-187f : 0000:00:1d.1
1860-187f : uhci_hcd
1880-189f : 0000:00:1d.2
1880-189f : uhci_hcd
18a0-18af : 0000:00:1f.1
18a0-18af : ata_piix
18c8-18cb : 0000:00:1f.2
18c8-18cb : ahci
18cc-18cf : 0000:00:1f.2
18cc-18cf : ahci
18d0-18d7 : 0000:00:1f.2
18d0-18d7 : ahci
18d8-18df : 0000:00:1f.2
18d8-18df : ahci
18e0-18ff : 0000:00:1f.2
18e0-18ff : ahci
1c00-1c1f : 0000:00:1f.3
2000-2fff : PCI Bus 0000:01
2000-207f : 0000:01:00.0
3000-3fff : PCI Bus 0000:04
3000-30ff : 0000:04:00.0
3000-30ff : sky2
4000-4fff : PCI Bus 0000:08
5000-5fff : PCI Bus 0000:02
6000-6fff : PCI Bus 0000:06
7000-7fff : PCI Bus 0000:0b
7000-70ff : PCI CardBus 0000:0c
7400-74ff : PCI CardBus 0000:0c
fe00-fe00 : pnp 00:05
/proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf0c00000 irq 47
# dmidecode 2.12
SMBIOS 2.4 present.
42 structures occupying 1491 bytes.
Table at 0x7FEDF000.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Phoenix Technologies LTD
Version: K3B51
Release Date: 08/15/2007
Address: 0xE6F60
Runtime Size: 102560 bytes
ROM Size: 1024 kB
Characteristics:
ISA is supported
PCI is supported
PC Card (PCMCIA) is supported
PNP is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
ACPI is supported
USB legacy is supported
AGP is supported
BIOS boot specification is supported
Targeted content distribution is supported
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: KOUZIRO
Product Name: Crestline+ICH8M
Version: Not Applicable
Serial Number: xxxxxxxxxxxxxxxx
UUID: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Intel Corporation
Product Name: SANTA ROSA CRB
Version: 03
Serial Number: xxxxxxxxxxxxxx
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer: No Enclosure
Type: Other
Lock: Not Present
Version: N/A
Serial Number: None
Asset Tag: No Asset Tag
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00001234
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: U2E1
Type: Central Processor
Family: Pentium
Manufacturer: Intel
ID: FD 06 00 00 FF FB EB BF
Signature: Type 0, Family 6, Model 15, Stepping 13
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: CPU Version
Voltage: 3.3 V
External Clock: 400 MHz
Max Speed: 2000 MHz
Current Speed: 2000 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 64 kB
Maximum Size: 64 kB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 2048 kB
Maximum Size: 4096 kB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0007, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J19
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator: COM 1
External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible
Handle 0x0008, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: Keyboard
External Connector Type: Circular DIN-8 male
Port Type: Keyboard Port
Handle 0x0009, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: PS/2 Mouse
External Connector Type: Circular DIN-8 male
Port Type: Mouse Port
Handle 0x000A, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Slot J8B3
Type: 32-bit PCI
Current Usage: Unknown
Length: Long
ID: 0
Characteristics:
5.0 V is provided
3.3 V is provided
Handle 0x000B, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Slot S9B1
Type: 32-bit PCI
Current Usage: Unknown
Length: Long
ID: 0
Characteristics:
5.0 V is provided
3.3 V is provided
Handle 0x000C, DMI type 9, 13 bytes
System Slot Information
Designation: PEG Slot J6B2
Type: 32-bit PCI Express
Current Usage: In Use
Length: Long
ID: 6
Characteristics:
5.0 V is provided
3.3 V is provided
Handle 0x000D, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Express Slot J6B1
Type: 32-bit PCI Express
Current Usage: In Use
Length: Long
ID: 7
Characteristics:
5.0 V is provided
3.3 V is provided
Handle 0x000E, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Express Slot J6D1
Type: 32-bit PCI Express
Current Usage: In Use
Length: Long
ID: 8
Characteristics:
5.0 V is provided
3.3 V is provided
Handle 0x000F, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Express Slot J8B4
Type: 32-bit PCI Express
Current Usage: Available
Length: Long
ID: 9
Characteristics:
5.0 V is provided
3.3 V is provided
Handle 0x0010, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Express Slot J8D1
Type: 32-bit PCI Express
Current Usage: Available
Length: Long
ID: 9
Characteristics:
5.0 V is provided
3.3 V is provided
Handle 0x0011, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Express Slot J7B1
Type: 32-bit PCI Express
Current Usage: Available
Length: Long
ID: 9
Characteristics:
5.0 V is provided
3.3 V is provided
Handle 0x0012, DMI type 10, 6 bytes
On Board Device Information
Type: Sound
Status: Disabled
Description: HD-Audio
Handle 0x0013, DMI type 11, 5 bytes
OEM Strings
String 1: This is the Intel Crestline
String 2: Chipset CRB Platform
Handle 0x0014, DMI type 12, 5 bytes
System Configuration Options
Option 1: Jumper settings can be described here.
Handle 0x0015, DMI type 15, 29 bytes
System Event Log
Area Length: 16 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: General-purpose non-volatile data functions
Access Address: 0x0000
Status: Invalid, Not Full
Change Token: 0x00000000
Header Format: Type 1
Supported Log Type Descriptors: 3
Descriptor 1: POST error
Data Format 1: POST results bitmap
Descriptor 2: Single-bit ECC memory error
Data Format 2: Multiple-event
Descriptor 3: Multi-bit ECC memory error
Data Format 3: Multiple-event
Handle 0x0016, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 4 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x0017, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0016
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: SODIMM
Set: 1
Locator: M1
Bank Locator: Bank 0
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Manufacturer: Mfg 0
Serial Number: 1234-B0
Asset Tag: Not Specified
Part Number: SODIMM000
Handle 0x0018, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0016
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: SODIMM
Set: 1
Locator: M2
Bank Locator: Bank 1
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Manufacturer: Mfg 1
Serial Number: 1234-B1
Asset Tag: Not Specified
Part Number: SODIMM001
Handle 0x0019, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Array Handle: 0x0016
Partition Width: 2
Handle 0x001A, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x0017
Memory Array Mapped Address Handle: 0x0019
Partition Row Position: Unknown
Interleave Position: Unknown
Interleaved Data Depth: Unknown
Handle 0x001B, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00040000000
Ending Address: 0x0007FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x0018
Memory Array Mapped Address Handle: 0x0019
Partition Row Position: Unknown
Interleave Position: Unknown
Interleaved Data Depth: Unknown
Handle 0x001C, DMI type 22, 26 bytes
Portable Battery
Location: Rear
Manufacturer: Intel Corporation
Name: Intel Corporation
Chemistry: Lithium Ion
Design Capacity: 1000 mWh
Design Voltage: 19 mV
SBDS Version: BATT_1234
Maximum Error: 100%
SBDS Serial Number: 0001
SBDS Manufacture Date: 1980-00-01
OEM-specific Information: 0x00000000
Handle 0x001D, DMI type 23, 13 bytes
System Reset
Status: Enabled
Watchdog Timer: Present
Boot Option: Do Not Reboot
Boot Option On Limit: Do Not Reboot
Reset Count: Unknown
Reset Limit: Unknown
Timer Interval: Unknown
Timeout: Unknown
Handle 0x001E, DMI type 24, 5 bytes
Hardware Security
Power-On Password Status: Disabled
Keyboard Password Status: Unknown
Administrator Password Status: Disabled
Front Panel Reset Status: Unknown
Handle 0x001F, DMI type 25, 9 bytes
System Power Controls
Next Scheduled Power-on: 12-31 23:59:59
Handle 0x0020, DMI type 26, 20 bytes
Voltage Probe
Description: Voltage Probe
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Handle 0x0021, DMI type 27, 12 bytes
Cooling Device
Temperature Probe Handle: 0x0022
Type: Fan
Status: OK
OEM-specific Information: 0x00000000
Handle 0x0022, DMI type 28, 20 bytes
Temperature Probe
Description: Temperature Probe
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Handle 0x0023, DMI type 29, 20 bytes
Electrical Current Probe
Description: Electrical Current Probe
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Handle 0x0024, DMI type 30, 6 bytes
Out-of-band Remote Access
Manufacturer Name: Intel
Inbound Connection: Enabled
Outbound Connection: Disabled
Handle 0x0025, DMI type 32, 20 bytes
System Boot Information
Status: <OUT OF SPEC>
Handle 0x0026, DMI type 129, 16 bytes
OEM-specific Type
Header and Data:
81 10 26 00 01 01 02 01 00 00 00 01 00 00 08 01
Strings:
Intel_ASF_001
Intel_ASF_001
Handle 0x0027, DMI type 136, 6 bytes
OEM-specific Type
Header and Data:
88 06 27 00 FF FF
Handle 0x0028, DMI type 150, 14 bytes
OEM-specific Type
Header and Data:
96 0E 28 00 01 01 00 00 00 00 00 00 00 00
Strings:
ABSOLUTE(PHOENIX) CLM
Handle 0x0029, DMI type 127, 4 bytes
End Of Table
[ 0.000000] CPU0 microcode updated early to revision 0xa4, date = 2010-10-02
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.0-123.20.1.el7.x86_64 ([email protected]) (gcc version 4.8.2 20140120 (Red Hat 4.8.2-16) (GCC) ) #1 SMP Thu Jan 29 18:05:33 UTC 2015
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.10.0-123.20.1.el7.x86_64 root=UUID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx ro vconsole.keymap=us crashkernel=auto vconsole.font=latarcyrheb-sun16 rhgb quiet LANG=en_US.UTF-8
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fecffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fed0000-0x000000007fedefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007fedf000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: KOUZIRO Crestline+ICH8M/SANTA ROSA CRB, BIOS K3B51 08/15/2007
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7fed0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2047MB, range: 1MB, type UC
[ 0.000000] total RAM covered: 2047M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 2 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2047MB, range: 1MB, type UC
[ 0.000000] found SMP MP-table at [mem 0x000f7e40-0x000f7e4f] mapped at [ffff8800000f7e40]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01e1f000, 0x01e1ffff] PGTABLE
[ 0.000000] BRK [0x01e20000, 0x01e20fff] PGTABLE
[ 0.000000] BRK [0x01e21000, 0x01e21fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
[ 0.000000] [mem 0x7fc00000-0x7fdfffff] page 2M
[ 0.000000] BRK [0x01e22000, 0x01e22fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7fbfffff]
[ 0.000000] [mem 0x7c000000-0x7fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x7fe00000-0x7fecffff]
[ 0.000000] [mem 0x7fe00000-0x7fecffff] page 4k
[ 0.000000] BRK [0x01e23000, 0x01e23fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x361f8000-0x370f3fff]
[ 0.000000] Reserving 161MB of memory at 704MB for crashkernel (System RAM: 2046MB)
[ 0.000000] ACPI: RSDP 00000000000f7d40 00024 (v02 HP )
[ 0.000000] ACPI: XSDT 000000007fed736c 0008C (v01 KOZIRO FRONTIER 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 000000007feddbd2 000F4 (v03 KOZIRO FRONTIER 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 000000007fed8731 0542D (v02 KOZIRO FRONTIER 06040000 INTL 20060707)
[ 0.000000] ACPI: FACS 000000007fedefc0 00040
[ 0.000000] ACPI: APIC 000000007feddcc6 00068 (v01 KOZIRO FRONTIER 06040000 LOHR 0000005A)
[ 0.000000] ACPI: HPET 000000007feddd2e 00038 (v01 KOZIRO FRONTIER 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 000000007feddd66 0003C (v01 KOZIRO FRONTIER 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TCPA 000000007feddda2 00032 (v01 KOZIRO FRONTIER 06040000 TL 00000000)
[ 0.000000] ACPI: TMOR 000000007fedddd4 00026 (v01 KOZIRO FRONTIER 06040000 PTL 00000003)
[ 0.000000] ACPI: APIC 000000007fedddfa 00068 (v01 KOZIRO FRONTIER 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 000000007fedde62 00028 (v01 KOZIRO FRONTIER 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 000000007fedde8a 00176 (v01 KOZIRO FRONTIER 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 000000007fed8454 002DD (v01 SataRe SataAhci 00001000 INTL 20060707)
[ 0.000000] ACPI: SSDT 000000007fed7984 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20060707)
[ 0.000000] ACPI: SSDT 000000007fed78de 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20060707)
[ 0.000000] ACPI: SSDT 000000007fed73f8 004E6 (v01 PmRef CpuPm 00003000 INTL 20060707)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify [email protected]
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007fecffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7fecffff]
[ 0.000000] NODE_DATA [mem 0x7fea9000-0x7fecffff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7fecffff]
[ 0.000000] On node 0 totalpages: 523886
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8124 pages used for memmap
[ 0.000000] DMA32 zone: 519888 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:5120 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s82560 r8192 d23936 u1048576
[ 0.000000] pcpu-alloc: s82560 r8192 d23936 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515677
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.0-123.20.1.el7.x86_64 root=UUID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx ro vconsole.keymap=us crashkernel=auto vconsole.font=latarcyrheb-sun16 rhgb quiet LANG=en_US.UTF-8
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 1867360k/2095936k available (6109k kernel code, 392k absent, 228184k reserved, 4069k data, 1580k init)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=2.
[ 0.000000] Experimental no-CBs for all CPUs
[ 0.000000] Experimental no-CBs CPUs: 0-1.
[ 0.000000] NR_IRQS:327936 nr_irqs:512 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1995.071 MHz processor
[ 0.001004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.14 BogoMIPS (lpj=1995071)
[ 0.001009] pid_max: default: 32768 minimum: 301
[ 0.001041] Security Framework initialized
[ 0.001054] SELinux: Initializing.
[ 0.001064] SELinux: Starting in permissive mode
[ 0.001328] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.002570] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.003108] Mount-cache hash table entries: 4096
[ 0.003446] Initializing cgroup subsys memory
[ 0.003466] Initializing cgroup subsys devices
[ 0.003469] Initializing cgroup subsys freezer
[ 0.003471] Initializing cgroup subsys net_cls
[ 0.003472] Initializing cgroup subsys blkio
[ 0.003475] Initializing cgroup subsys perf_event
[ 0.003477] Initializing cgroup subsys hugetlb
[ 0.003516] CPU: Physical Processor ID: 0
[ 0.003518] CPU: Processor Core ID: 0
[ 0.003520] mce: CPU supports 6 MCE banks
[ 0.003530] CPU0: Thermal monitoring enabled (TM2)
[ 0.003538] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
[ 0.003624] Freeing SMP alternatives: 24k freed
[ 0.005205] ACPI: Core revision 20130517
[ 0.008607] ACPI: All ACPI Tables successfully acquired
[ 0.009011] ftrace: allocating 23404 entries in 92 pages
[ 0.016566] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.026750] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz (fam: 06, model: 0f, stepping: 0d)
[ 0.027000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.027000] perf_event_intel: PEBS disabled due to CPU errata
[ 0.027000] ... version: 2
[ 0.027000] ... bit width: 40
[ 0.027000] ... generic registers: 2
[ 0.027000] ... value mask: 000000ffffffffff
[ 0.027000] ... max period: 000000007fffffff
[ 0.027000] ... fixed-purpose events: 3
[ 0.027000] ... event mask: 0000000700000003
[ 0.027924] smpboot: Booting Node 0, Processors #1 OK
[ 0.027831] CPU1 microcode updated early to revision 0xa4, date = 2010-10-02
[ 0.040047] Brought up 2 CPUs
[ 0.040052] smpboot: Total of 2 processors activated (7980.28 BogoMIPS)
[ 0.040147] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.041191] devtmpfs: initialized
[ 0.042809] EVM: security.selinux
[ 0.042812] EVM: security.ima
[ 0.042814] EVM: security.capability
[ 0.043038] PM: Registering ACPI NVS region [mem 0x7fed0000-0x7fedefff] (61440 bytes)
[ 0.044117] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.044173] NET: Registered protocol family 16
[ 0.044337] ACPI: bus type PCI registered
[ 0.044340] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.044399] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.044402] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.063109] PCI: Using configuration type 1 for base access
[ 0.064130] bio: create slab <bio-0> at 0
[ 0.064130] ACPI: Added _OSI(Module Device)
[ 0.064130] ACPI: Added _OSI(Processor Device)
[ 0.064130] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.064130] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.065787] ACPI: EC: Look up EC in DSDT
[ 0.067779] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.068645] ACPI: SSDT 000000007fed8112 0027A (v01 PmRef Cpu0Ist 00003000 INTL 20060707)
[ 0.068929] ACPI: Dynamic OEM Table Load:
[ 0.068932] ACPI: SSDT (null) 0027A (v01 PmRef Cpu0Ist 00003000 INTL 20060707)
[ 0.069098] ACPI: SSDT 000000007fed7be3 004AA (v01 PmRef Cpu0Cst 00003001 INTL 20060707)
[ 0.069363] ACPI: Dynamic OEM Table Load:
[ 0.069366] ACPI: SSDT (null) 004AA (v01 PmRef Cpu0Cst 00003001 INTL 20060707)
[ 0.069591] ACPI: SSDT 000000007fed838c 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20060707)
[ 0.069863] ACPI: Dynamic OEM Table Load:
[ 0.069866] ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20060707)
[ 0.069943] ACPI: SSDT 000000007fed808d 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20060707)
[ 0.070213] ACPI: Dynamic OEM Table Load:
[ 0.070216] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20060707)
[ 0.070481] ACPI: Interpreter enabled
[ 0.070487] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[ 0.070493] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[ 0.070509] ACPI: (supports S0 S3 S4 S5)
[ 0.070511] ACPI: Using IOAPIC for interrupt routing
[ 0.070544] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.071176] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.078330] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.078338] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.078360] ACPI Error: [CDW1] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[ 0.078366] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88007c76f6b8), AE_NOT_FOUND (20130517/psparse-536)
[ 0.078377] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.079027] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.079031] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.079034] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.079037] acpi PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[ 0.079039] acpi PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.079042] acpi PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.079044] acpi PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[ 0.079048] acpi PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
[ 0.079051] PCI: root bus 00: using default resources
[ 0.079175] PCI host bridge to bus 0000:00
[ 0.079179] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.079182] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.079184] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.079197] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[ 0.079314] pci 0000:00:01.0: [8086:2a01] type 01 class 0x060400
[ 0.079367] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.079488] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[ 0.079548] pci 0000:00:1a.0: reg 0x20: [io 0x1800-0x181f]
[ 0.079641] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.079685] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[ 0.079744] pci 0000:00:1a.1: reg 0x20: [io 0x1820-0x183f]
[ 0.079835] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.079891] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[ 0.079917] pci 0000:00:1a.7: reg 0x10: [mem 0xf0c04800-0xf0c04bff]
[ 0.080032] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.080087] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.080141] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[ 0.080165] pci 0000:00:1b.0: reg 0x10: [mem 0xf0c00000-0xf0c03fff 64bit]
[ 0.080285] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.080343] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.080389] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[ 0.080513] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.080615] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
[ 0.080737] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.080838] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
[ 0.080960] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.081068] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400
[ 0.081191] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.081288] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[ 0.081347] pci 0000:00:1d.0: reg 0x20: [io 0x1840-0x185f]
[ 0.081439] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.081479] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[ 0.081539] pci 0000:00:1d.1: reg 0x20: [io 0x1860-0x187f]
[ 0.081630] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.081673] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[ 0.081732] pci 0000:00:1d.2: reg 0x20: [io 0x1880-0x189f]
[ 0.081823] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.081877] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[ 0.081903] pci 0000:00:1d.7: reg 0x10: [mem 0xf0c04c00-0xf0c04fff]
[ 0.082018] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.082074] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.082118] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.082281] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[ 0.082400] pci 0000:00:1f.0: address space collision: [io 0x1000-0x107f] conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000]
[ 0.082407] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.082412] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1670 (mask 0003)
[ 0.082417] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 007f)
[ 0.082421] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0380 (mask 0007)
[ 0.082426] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
[ 0.082540] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
[ 0.082558] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 0.082571] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 0.082584] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
[ 0.082597] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.082610] pci 0000:00:1f.1: reg 0x20: [io 0x18a0-0x18af]
[ 0.082725] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
[ 0.082754] pci 0000:00:1f.2: reg 0x10: [io 0x18d8-0x18df]
[ 0.082767] pci 0000:00:1f.2: reg 0x14: [io 0x18cc-0x18cf]
[ 0.082780] pci 0000:00:1f.2: reg 0x18: [io 0x18d0-0x18d7]
[ 0.082793] pci 0000:00:1f.2: reg 0x1c: [io 0x18c8-0x18cb]
[ 0.082806] pci 0000:00:1f.2: reg 0x20: [io 0x18e0-0x18ff]
[ 0.082819] pci 0000:00:1f.2: reg 0x24: [mem 0xf0c04000-0xf0c047ff]
[ 0.082888] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.082978] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[ 0.082996] pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff]
[ 0.083044] pci 0000:00:1f.3: reg 0x20: [io 0x1c00-0x1c1f]
[ 0.083213] pci 0000:01:00.0: [10de:0427] type 00 class 0x030000
[ 0.083226] pci 0000:01:00.0: reg 0x10: [mem 0xce000000-0xceffffff]
[ 0.083239] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.083251] pci 0000:01:00.0: reg 0x1c: [mem 0xcc000000-0xcdffffff 64bit]
[ 0.083261] pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f]
[ 0.083270] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.085012] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.085016] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.085020] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff]
[ 0.085025] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.085132] pci 0000:02:00.0: [14e4:4328] type 00 class 0x028000
[ 0.085166] pci 0000:02:00.0: reg 0x10: [mem 0xf0500000-0xf0503fff 64bit]
[ 0.085192] pci 0000:02:00.0: reg 0x18: [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.085340] pci 0000:02:00.0: supports D1 D2
[ 0.085376] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.085415] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.085429] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.085438] pci 0000:00:1c.0: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.085446] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.085559] pci 0000:04:00.0: [11ab:4363] type 00 class 0x020000
[ 0.085592] pci 0000:04:00.0: reg 0x10: [mem 0xf0800000-0xf0803fff 64bit]
[ 0.085609] pci 0000:04:00.0: reg 0x18: [io 0x3000-0x30ff]
[ 0.085671] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.085775] pci 0000:04:00.0: supports D1 D2
[ 0.085778] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.085807] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.087021] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[ 0.087027] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.087033] pci 0000:00:1c.1: bridge window [mem 0xf0800000-0xf08fffff]
[ 0.087121] pci 0000:00:1c.2: PCI bridge to [bus 06-07]
[ 0.087248] acpiphp: Slot [1] registered
[ 0.087259] pci 0000:00:1c.5: PCI bridge to [bus 08-09]
[ 0.087265] pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff]
[ 0.087270] pci 0000:00:1c.5: bridge window [mem 0xf0600000-0xf07fffff]
[ 0.087278] pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf03fffff 64bit pref]
[ 0.087358] pci 0000:0b:09.0: [104c:8039] type 02 class 0x060700
[ 0.087386] pci 0000:0b:09.0: reg 0x10: [mem 0xf0900000-0xf0900fff]
[ 0.087431] pci 0000:0b:09.0: supports D1 D2
[ 0.087434] pci 0000:0b:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.087499] pci 0000:0b:09.1: [104c:803a] type 00 class 0x0c0010
[ 0.087527] pci 0000:0b:09.1: reg 0x10: [mem 0xf0902000-0xf09027ff]
[ 0.087543] pci 0000:0b:09.1: reg 0x14: [mem 0xf0904000-0xf0907fff]
[ 0.087652] pci 0000:0b:09.1: supports D1 D2
[ 0.087654] pci 0000:0b:09.1: PME# supported from D0 D1 D2 D3hot
[ 0.087716] pci 0000:0b:09.2: [104c:803b] type 00 class 0x018000
[ 0.087742] pci 0000:0b:09.2: reg 0x10: [mem 0xf0901000-0xf0901fff]
[ 0.087858] pci 0000:0b:09.2: supports D1 D2
[ 0.087860] pci 0000:0b:09.2: PME# supported from D0 D1 D2 D3hot
[ 0.087919] pci 0000:0b:09.3: [104c:803c] type 00 class 0x080501
[ 0.087946] pci 0000:0b:09.3: reg 0x10: [mem 0xf0902800-0xf09028ff]
[ 0.088065] pci 0000:0b:09.3: supports D1 D2
[ 0.088068] pci 0000:0b:09.3: PME# supported from D0 D1 D2 D3hot
[ 0.088163] pci 0000:00:1e.0: PCI bridge to [bus 0b-0c] (subtractive decode)
[ 0.088172] pci 0000:00:1e.0: bridge window [mem 0xf0900000-0xf09fffff]
[ 0.088181] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.088184] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.088244] pci_bus 0000:0c: busn_res: can not insert [bus 0c-ff] under [bus 0b-0c] (conflicts with (null) [bus 0b-0c])
[ 0.088250] pci_bus 0000:0c: busn_res: [bus 0c-ff] end is updated to 0f
[ 0.088254] pci_bus 0000:0c: busn_res: can not insert [bus 0c-0f] under [bus 0b-0c] (conflicts with (null) [bus 0b-0c])
[ 0.088259] pci_bus 0000:0c: [bus 0c-0f] partially hidden behind transparent bridge 0000:0b [bus 0b-0c]
[ 0.088555] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.088624] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.088691] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.088757] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.088824] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.088890] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.088956] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.089029] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.089577] ACPI: Enabled 4 GPEs in block 00 to 1F
[ 0.089588] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.089634] Found 1 acpi root devices
[ 0.089691] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.090021] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.090024] vgaarb: loaded
[ 0.090026] vgaarb: bridge control possible 0000:01:00.0
[ 0.090127] SCSI subsystem initialized
[ 0.090151] ACPI: bus type USB registered
[ 0.090171] usbcore: registered new interface driver usbfs
[ 0.090185] usbcore: registered new interface driver hub
[ 0.090191] usbcore: registered new device driver usb
[ 0.090191] PCI: Using ACPI for IRQ routing
[ 0.101570] PCI: pci_cache_line_size set to 64 bytes
[ 0.101669] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.101671] e820: reserve RAM buffer [mem 0x7fed0000-0x7fffffff]
[ 0.101779] NetLabel: Initializing
[ 0.101781] NetLabel: domain hash size = 128
[ 0.101782] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.101798] NetLabel: unlabeled traffic allowed by default
[ 0.101839] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.101845] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.101850] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.103019] Switching to clocksource hpet
[ 0.111178] pnp: PnP ACPI init
[ 0.111199] ACPI: bus type PNP registered
[ 0.111692] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.111696] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.111700] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.111703] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.111706] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.111709] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.111711] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.111714] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.111719] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.112439] pnp 00:01: [dma 4]
[ 0.112478] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.112512] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.112627] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.112631] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.112682] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.112755] system 00:05: [io 0x0380-0x0387] has been reserved
[ 0.112759] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.112762] system 00:05: [io 0x0800-0x080f] has been reserved
[ 0.112768] system 00:05: [io 0x1000-0x107f] could not be reserved
[ 0.112772] system 00:05: [io 0x1180-0x11bf] has been reserved
[ 0.112774] system 00:05: [io 0x1640-0x164f] has been reserved
[ 0.112777] system 00:05: [io 0xfe00] has been reserved
[ 0.112781] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.112848] system 00:06: [io 0x06a0-0x06af] has been reserved
[ 0.112851] system 00:06: [io 0x06b0-0x06ff] has been reserved
[ 0.112855] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.112895] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.112956] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.112996] pnp 00:09: Plug and Play ACPI device, IDs SYN100c SYN1000 SYN1002 PNP0f13 (active)
[ 0.113030] pnp: PnP ACPI: found 10 devices
[ 0.113031] ACPI: bus type PNP unregistered
[ 0.120101] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02-03] add_size 1000
[ 0.120116] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x001fffff pref] to [bus 04-05] add_size 200000
[ 0.120129] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 06-07] add_size 1000
[ 0.120132] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06-07] add_size 200000
[ 0.120135] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 06-07] add_size 200000
[ 0.120165] pci 0000:0b:09.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.120168] pci 0000:0b:09.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.120172] pci 0000:00:1e.0: bridge window [io 0x1000-0x0fff] to [bus 0b-0c] add_size 1000
[ 0.120175] pci 0000:0b:09.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.120179] pci 0000:00:1e.0: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 0b-0c] add_size 4000000
[ 0.120186] pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
[ 0.120190] pci 0000:00:1e.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.120193] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
[ 0.120196] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.120199] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.120202] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.120204] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.120207] pci 0000:00:1e.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.120213] pci 0000:00:1e.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[ 0.120216] pci 0000:00:1c.1: BAR 15: assigned [mem 0x84000000-0x842fffff pref]
[ 0.120220] pci 0000:00:1c.2: BAR 14: assigned [mem 0x84300000-0x844fffff]
[ 0.120223] pci 0000:00:1c.2: BAR 15: assigned [mem 0x84500000-0x846fffff 64bit pref]
[ 0.120227] pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.120230] pci 0000:00:1c.2: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.120234] pci 0000:00:1e.0: BAR 13: assigned [io 0x7000-0x7fff]
[ 0.120237] pci 0000:00:1f.3: BAR 0: assigned [mem 0x84700000-0x847000ff]
[ 0.120246] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
[ 0.120250] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.120253] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.120258] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff]
[ 0.120261] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.120267] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.120271] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 0.120278] pci 0000:00:1c.0: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.120283] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.120293] pci 0000:04:00.0: BAR 6: assigned [mem 0x84000000-0x8401ffff pref]
[ 0.120296] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[ 0.120299] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.120306] pci 0000:00:1c.1: bridge window [mem 0xf0800000-0xf08fffff]
[ 0.120312] pci 0000:00:1c.1: bridge window [mem 0x84000000-0x842fffff pref]
[ 0.120320] pci 0000:00:1c.2: PCI bridge to [bus 06-07]
[ 0.120324] pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff]
[ 0.120331] pci 0000:00:1c.2: bridge window [mem 0x84300000-0x844fffff]
[ 0.120336] pci 0000:00:1c.2: bridge window [mem 0x84500000-0x846fffff 64bit pref]
[ 0.120345] pci 0000:00:1c.5: PCI bridge to [bus 08-09]
[ 0.120349] pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff]
[ 0.120356] pci 0000:00:1c.5: bridge window [mem 0xf0600000-0xf07fffff]
[ 0.120361] pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf03fffff 64bit pref]
[ 0.120371] pci 0000:0b:09.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.120374] pci 0000:0b:09.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.120377] pci 0000:0b:09.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.120380] pci 0000:0b:09.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.120383] pci 0000:0b:09.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[ 0.120387] pci 0000:0b:09.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
[ 0.120390] pci 0000:0b:09.0: BAR 13: assigned [io 0x7000-0x70ff]
[ 0.120393] pci 0000:0b:09.0: BAR 14: assigned [io 0x7400-0x74ff]
[ 0.120396] pci 0000:0b:09.0: CardBus bridge to [bus 0c-0f]
[ 0.120398] pci 0000:0b:09.0: bridge window [io 0x7000-0x70ff]
[ 0.120404] pci 0000:0b:09.0: bridge window [io 0x7400-0x74ff]
[ 0.120410] pci 0000:0b:09.0: bridge window [mem 0x80000000-0x83ffffff pref]
[ 0.120416] pci 0000:0b:09.0: bridge window [mem 0x88000000-0x8bffffff]
[ 0.120422] pci 0000:00:1e.0: PCI bridge to [bus 0b-0c]
[ 0.120426] pci 0000:00:1e.0: bridge window [io 0x7000-0x7fff]
[ 0.120433] pci 0000:00:1e.0: bridge window [mem 0xf0900000-0xf09fffff]
[ 0.120438] pci 0000:00:1e.0: bridge window [mem 0x80000000-0x83ffffff pref]
[ 0.120448] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.120451] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.120453] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.120456] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xceffffff]
[ 0.120459] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.120462] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 0.120464] pci_bus 0000:02: resource 1 [mem 0xf0500000-0xf05fffff]
[ 0.120467] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.120470] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.120472] pci_bus 0000:04: resource 1 [mem 0xf0800000-0xf08fffff]
[ 0.120475] pci_bus 0000:04: resource 2 [mem 0x84000000-0x842fffff pref]
[ 0.120478] pci_bus 0000:06: resource 0 [io 0x6000-0x6fff]
[ 0.120480] pci_bus 0000:06: resource 1 [mem 0x84300000-0x844fffff]
[ 0.120483] pci_bus 0000:06: resource 2 [mem 0x84500000-0x846fffff 64bit pref]
[ 0.120485] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
[ 0.120488] pci_bus 0000:08: resource 1 [mem 0xf0600000-0xf07fffff]
[ 0.120491] pci_bus 0000:08: resource 2 [mem 0xf0000000-0xf03fffff 64bit pref]
[ 0.120493] pci_bus 0000:0b: resource 0 [io 0x7000-0x7fff]
[ 0.120496] pci_bus 0000:0b: resource 1 [mem 0xf0900000-0xf09fffff]
[ 0.120498] pci_bus 0000:0b: resource 2 [mem 0x80000000-0x83ffffff pref]
[ 0.120501] pci_bus 0000:0b: resource 4 [io 0x0000-0xffff]
[ 0.120503] pci_bus 0000:0b: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.120506] pci_bus 0000:0c: resource 0 [io 0x7000-0x70ff]
[ 0.120509] pci_bus 0000:0c: resource 1 [io 0x7400-0x74ff]
[ 0.120511] pci_bus 0000:0c: resource 2 [mem 0x80000000-0x83ffffff pref]
[ 0.120514] pci_bus 0000:0c: resource 3 [mem 0x88000000-0x8bffffff]
[ 0.120551] NET: Registered protocol family 2
[ 0.120729] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.120817] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.120928] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.120984] TCP: reno registered
[ 0.120994] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.121027] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.121098] NET: Registered protocol family 1
[ 0.122765] pci 0000:01:00.0: Boot video device
[ 0.122790] PCI: CLS 64 bytes, default 64
[ 0.122850] Unpacking initramfs...
[ 0.463804] Freeing initrd memory: 15344k freed
[ 0.471820] Simple Boot Flag at 0x36 set to 0x1
[ 0.472289] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa4
[ 0.472298] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa4
[ 0.472338] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.472624] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.472649] Initialise system trusted keyring
[ 0.472708] audit: initializing netlink socket (disabled)
[ 0.472725] type=2000 audit(1424693637.471:1): initialized
[ 0.502481] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.503953] zbud: loaded
[ 0.504149] VFS: Disk quotas dquot_6.5.2
[ 0.504191] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.504385] msgmni has been set to 3677
[ 0.504445] Key type big_key registered
[ 0.504447] SELinux: Registering netfilter hooks
[ 0.505216] alg: No test for stdrng (krng)
[ 0.505225] NET: Registered protocol family 38
[ 0.505229] Key type asymmetric registered
[ 0.505231] Asymmetric key parser 'x509' registered
[ 0.505278] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.505316] io scheduler noop registered
[ 0.505319] io scheduler deadline registered (default)
[ 0.505353] io scheduler cfq registered
[ 0.505631] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.505819] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.506052] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.506264] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[ 0.506479] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
[ 0.506598] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.506618] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.506696] intel_idle: does not run on family 6 model 15
[ 0.507295] ACPI: AC Adapter [ACAD] (on-line)
[ 0.507415] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.507770] ACPI: Lid Switch [LID]
[ 0.507818] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.507822] ACPI: Power Button [PWRB]
[ 0.507861] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.507864] ACPI: Sleep Button [SLPB]
[ 0.507915] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.507918] ACPI: Power Button [PWRF]
[ 0.507988] ACPI: Requesting acpi_cpufreq
[ 0.509640] Monitor-Mwait will be used to enter C-1 state
[ 0.509664] Monitor-Mwait will be used to enter C-2 state
[ 0.509682] Monitor-Mwait will be used to enter C-3 state
[ 0.509693] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.509709] ACPI: acpi_idle registered with cpuidle
[ 0.514603] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.514606] ACPI: Thermal Zone [THR1] (55 C)
[ 0.514640] GHES: HEST is not enabled!
[ 0.514725] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.515541] Non-volatile memory driver v1.3
[ 0.515577] Linux agpgart interface v0.103
[ 0.515783] crash memory driver: version 1.1
[ 0.515833] rdac: device handler registered
[ 0.515885] hp_sw: device handler registered
[ 0.515887] emc: device handler registered
[ 0.515889] alua: device handler registered
[ 0.515929] libphy: Fixed MDIO Bus: probed
[ 0.515978] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.515983] ehci-pci: EHCI PCI platform driver
[ 0.516188] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.516241] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.516266] ehci-pci 0000:00:1a.7: debug port 1
[ 0.520192] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.520214] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf0c04800
[ 0.526026] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.526081] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.526084] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.526087] usb usb1: Product: EHCI Host Controller
[ 0.526090] usb usb1: Manufacturer: Linux 3.10.0-123.20.1.el7.x86_64 ehci_hcd
[ 0.526092] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.526235] hub 1-0:1.0: USB hub found
[ 0.526246] hub 1-0:1.0: 4 ports detected
[ 0.526577] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.526628] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.526644] ehci-pci 0000:00:1d.7: debug port 1
[ 0.530568] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.530589] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf0c04c00
[ 0.534627] ACPI: Battery Slot [BAT0] (battery present)
[ 0.536021] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.536070] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.536073] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.536076] usb usb2: Product: EHCI Host Controller
[ 0.536078] usb usb2: Manufacturer: Linux 3.10.0-123.20.1.el7.x86_64 ehci_hcd
[ 0.536081] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.536192] hub 2-0:1.0: USB hub found
[ 0.536200] hub 2-0:1.0: 6 ports detected
[ 0.536432] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.536434] ohci-pci: OHCI PCI platform driver
[ 0.536447] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.536580] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.536643] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.536688] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 0.536744] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.536747] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.536750] usb usb3: Product: UHCI Host Controller
[ 0.536752] usb usb3: Manufacturer: Linux 3.10.0-123.20.1.el7.x86_64 uhci_hcd
[ 0.536755] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.536863] hub 3-0:1.0: USB hub found
[ 0.536871] hub 3-0:1.0: 2 ports detected
[ 0.537090] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.537143] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.537185] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 0.537239] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.537242] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.537245] usb usb4: Product: UHCI Host Controller
[ 0.537248] usb usb4: Manufacturer: Linux 3.10.0-123.20.1.el7.x86_64 uhci_hcd
[ 0.537250] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.537359] hub 4-0:1.0: USB hub found
[ 0.537367] hub 4-0:1.0: 2 ports detected
[ 0.537572] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.537623] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.537652] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[ 0.537707] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.537710] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.537713] usb usb5: Product: UHCI Host Controller
[ 0.537715] usb usb5: Manufacturer: Linux 3.10.0-123.20.1.el7.x86_64 uhci_hcd
[ 0.537718] usb usb5: SerialNumber: 0000:00:1d.0
[ 0.537816] hub 5-0:1.0: USB hub found
[ 0.537824] hub 5-0:1.0: 2 ports detected
[ 0.538034] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.538086] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.538129] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[ 0.538182] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.538185] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.538188] usb usb6: Product: UHCI Host Controller
[ 0.538190] usb usb6: Manufacturer: Linux 3.10.0-123.20.1.el7.x86_64 uhci_hcd
[ 0.538193] usb usb6: SerialNumber: 0000:00:1d.1
[ 0.538290] hub 6-0:1.0: USB hub found
[ 0.538298] hub 6-0:1.0: 2 ports detected
[ 0.538506] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.538560] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.538591] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[ 0.538645] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.538648] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.538651] usb usb7: Product: UHCI Host Controller
[ 0.538654] usb usb7: Manufacturer: Linux 3.10.0-123.20.1.el7.x86_64 uhci_hcd
[ 0.538656] usb usb7: SerialNumber: 0000:00:1d.2
[ 0.538759] hub 7-0:1.0: USB hub found
[ 0.538767] hub 7-0:1.0: 2 ports detected
[ 0.538922] usbcore: registered new interface driver usbserial
[ 0.538931] usbcore: registered new interface driver usbserial_generic
[ 0.538939] usbserial: USB Serial support registered for generic
[ 0.538981] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.558857] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.558865] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.558968] mousedev: PS/2 mouse device common for all mice
[ 0.560149] rtc_cmos 00:07: RTC can wake from S4
[ 0.560320] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.560355] rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.560408] cpuidle: using governor menu
[ 0.560722] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.560834] usbcore: registered new interface driver usbhid
[ 0.560836] usbhid: USB HID core driver
[ 0.560900] drop_monitor: Initializing network drop monitor service
[ 0.560988] TCP: cubic registered
[ 0.560991] Initializing XFRM netlink socket
[ 0.561115] NET: Registered protocol family 10
[ 0.561299] NET: Registered protocol family 17
[ 0.561570] Loading compiled-in X.509 certificates
[ 0.561601] Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
[ 0.561620] Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
[ 0.562464] Loaded X.509 cert 'CentOS Linux kernel signing key: 182ebb09cd40c94ca0c3ce4ee3f71df520b4da80'
[ 0.562479] registered taskstats version 1
[ 0.565039] Key type trusted registered
[ 0.567386] Key type encrypted registered
[ 0.569605] IMA: No TPM chip found, activating TPM-bypass!
[ 0.570193] rtc_cmos 00:07: setting system clock to 2015-02-23 12:13:58 UTC (1424693638)
[ 0.571530] Freeing unused kernel memory: 1580k freed
[ 0.574774] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.577223] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 0.577415] systemd[1]: Running in initial RAM disk.
[ 0.577487] systemd[1]: Set hostname to <frnh70.viaout.is.s.u-tokyo.ac.jp>.
[ 0.610156] systemd[1]: Expecting device dev-disk-by\x2duuid-e0be5f72\x2db4ea\x2d4a0b\x2d8dc6\x2de50d5785cd62.device...
[ 0.610174] systemd[1]: Starting -.slice.
[ 0.610369] systemd[1]: Created slice -.slice.
[ 0.610420] systemd[1]: Starting System Slice.
[ 0.610516] systemd[1]: Created slice System Slice.
[ 0.610558] systemd[1]: Starting Slices.
[ 0.610572] systemd[1]: Reached target Slices.
[ 0.610610] systemd[1]: Starting Timers.
[ 0.610624] systemd[1]: Reached target Timers.
[ 0.610665] systemd[1]: Starting Journal Socket.
[ 0.610738] systemd[1]: Listening on Journal Socket.
[ 0.610957] systemd[1]: Starting dracut cmdline hook...
[ 0.611625] systemd[1]: Started Load Kernel Modules.
[ 0.611656] systemd[1]: Starting Setup Virtual Console...
[ 0.612117] systemd[1]: Starting Journal Service...
[ 0.612653] systemd[1]: Started Journal Service.
[ 0.631760] systemd-journald[91]: Vacuuming done, freed 0 bytes
[ 0.786976] systemd-udevd[196]: starting version 208
[ 0.822245] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 0.822307] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input5
[ 0.838045] usb 2-4: new high-speed USB device number 2 using ehci-pci
[ 0.875547] sky2: driver version 1.30
[ 0.875690] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 2
[ 0.875758] sky2 0000:04:00.0: irq 45 for MSI/MSI-X
[ 0.878263] sky2 0000:04:00.0 eth0: addr xx:xx:xx:xx:xx:xx
[ 0.882760] [drm] Initialized drm 1.1.0 20060810
[ 0.889841] yenta_cardbus 0000:0b:09.0: CardBus bridge found [152d:0763]
[ 0.889866] yenta_cardbus 0000:0b:09.0: Enabling burst memory read transactions
[ 0.889873] yenta_cardbus 0000:0b:09.0: Using CSCINT to route CSC interrupts to PCI
[ 0.889875] yenta_cardbus 0000:0b:09.0: Routing CardBus interrupts to PCI
[ 0.889882] yenta_cardbus 0000:0b:09.0: TI: mfunc 0x01001922, devctl 0x66
[ 0.903105] ACPI: bus type ATA registered
[ 0.918059] libata version 3.00 loaded.
[ 0.923255] ahci 0000:00:1f.2: version 3.0
[ 0.923462] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[ 0.923534] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 0.923539] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part
[ 0.931025] scsi0 : ahci
[ 0.937726] scsi1 : ahci
[ 0.942554] wmi: Mapper loaded
[ 0.943085] scsi2 : ahci
[ 0.943186] ata1: SATA max UDMA/133 abar m2048@0xf0c04000 port 0xf0c04100 irq 46
[ 0.943190] ata2: SATA max UDMA/133 abar m2048@0xf0c04000 port 0xf0c04180 irq 46
[ 0.943193] ata3: SATA max UDMA/133 abar m2048@0xf0c04000 port 0xf0c04200 irq 46
[ 0.943249] ata_piix 0000:00:1f.1: version 2.13
[ 0.962641] usb 2-4: New USB device found, idVendor=064e, idProduct=a111
[ 0.962647] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 0.962651] usb 2-4: Product: USB 2.0 Camera
[ 0.962653] usb 2-4: Manufacturer: SuYin
[ 0.962656] usb 2-4: SerialNumber: CN1314-MI05-VS-R02.01.01
[ 0.966030] scsi3 : ata_piix
[ 0.984229] systemd-udevd[199]: renamed network interface eth0 to enp4s0
[ 0.986447] scsi4 : ata_piix
[ 0.986522] [drm] hdmi device not found 1 0 1
[ 0.986543] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[ 0.986547] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[ 0.986680] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x086700a2
[ 0.986684] nouveau [ DEVICE][0000:01:00.0] Chipset: G86 (NV86)
[ 0.986686] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 0.989096] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 0.992085] ata5: port disabled--ignoring
[ 1.054730] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 1.054733] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 1.054855] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 1.054859] nouveau [ VBIOS][0000:01:00.0] version 60.86.4e.00.19
[ 1.078435] nouveau [ PFB][0000:01:00.0] RAM type: DDR2
[ 1.078440] nouveau [ PFB][0000:01:00.0] RAM size: 256 MiB
[ 1.078442] nouveau [ PFB][0000:01:00.0] ZCOMP: 646 tags
[ 1.106249] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 1.106260] nouveau [ PTHERM][0000:01:00.0] fan management: disabled
[ 1.106263] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 1.106406] [TTM] Zone kernel: Available graphics memory: 942154 kiB
[ 1.106408] [TTM] Initializing pool allocator
[ 1.106413] [TTM] Initializing DMA pool allocator
[ 1.106425] nouveau [ DRM] VRAM: 256 MiB
[ 1.106427] nouveau [ DRM] GART: 1048576 MiB
[ 1.106432] nouveau [ DRM] TMDS table version 2.0
[ 1.106435] nouveau [ DRM] DCB version 4.0
[ 1.106438] nouveau [ DRM] DCB outp 00: 01000323 00000034
[ 1.106440] nouveau [ DRM] DCB outp 01: 02012300 00000028
[ 1.106443] nouveau [ DRM] DCB outp 02: 02012302 00000010
[ 1.106445] nouveau [ DRM] DCB outp 03: 010233f1 00c0c080
[ 1.106448] nouveau [ DRM] DCB conn 00: 0040
[ 1.106451] nouveau [ DRM] DCB conn 01: 0100
[ 1.106453] nouveau [ DRM] DCB conn 02: 1230
[ 1.106456] nouveau [ DRM] DCB conn 03: 0310
[ 1.106458] nouveau [ DRM] DCB conn 04: 0311
[ 1.106460] nouveau [ DRM] DCB conn 05: 0313
[ 1.124855] nouveau W[ DRM] failed to create encoder 0/1/0: -19
[ 1.124859] nouveau W[ DRM] TV-1 has no encoders, removing
[ 1.124942] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.124944] [drm] No driver support for vblank timestamp query.
[ 1.125019] nouveau [ DRM] 3 available performance level(s)
[ 1.125024] nouveau [ DRM] 0: core 169MHz shader 338MHz memory 100MHz voltage 1150mV fanspeed 100%
[ 1.125028] nouveau [ DRM] 1: core 275MHz shader 550MHz memory 200MHz voltage 1150mV fanspeed 100%
[ 1.125032] nouveau [ DRM] 2: core 400MHz shader 800MHz memory 400MHz voltage 1320mV fanspeed 100%
[ 1.125035] nouveau [ DRM] c: core 275MHz shader 550MHz memory 199MHz
[ 1.140417] ata4.00: ATAPI: Optiarc DVD RW AD-7590A, 1.01, max UDMA/33
[ 1.144447] nouveau [ DRM] MM: using CRYPT for buffer copies
[ 1.146297] ata4.00: configured for UDMA/33
[ 1.194175] nouveau [ DRM] allocated 1680x1050 fb: 0x60000, bo ffff880036826000
[ 1.194308] fbcon: nouveaufb (fb0) is primary device
[ 1.248042] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.252027] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.401032] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.401594] ata1.00: unexpected _GTF length (8)
[ 1.605830] psmouse serio1: synaptics: Touchpad model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0/0x0, board id: 3655, fw id: 32050
[ 1.673861] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 1.740353] ata1.00: ATA-7: TOSHIBA MK8037GSX, DL230M, max UDMA/100
[ 1.740355] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.741240] ata1.00: unexpected _GTF length (8)
[ 1.741435] ata1.00: configured for UDMA/100
[ 1.741572] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8037GS DL23 PQ: 0 ANSI: 5
[ 1.743416] scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7590A 1.01 PQ: 0 ANSI: 5
[ 1.766676] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.766678] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.766909] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.775776] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.775841] sd 0:0:0:0: [sda] Write Protect is off
[ 1.775844] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.775872] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.810077] sda: sda1 sda2
[ 1.810511] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.865802] yenta_cardbus 0000:0b:09.0: ISA IRQ mask 0x0cf8, PCI irq 20
[ 1.865806] yenta_cardbus 0000:0b:09.0: Socket status: 30000006
[ 1.865810] pci_bus 0000:0b: Raising subordinate bus# of parent bus (#0b) from #0c to #0f
[ 1.923064] firewire_ohci 0000:0b:09.1: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 2.249740] Console: switching to colour frame buffer device 210x65
[ 2.254247] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 2.254250] nouveau 0000:01:00.0: registered panic notifier
[ 2.254270] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
[ 2.345697] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[ 2.347915] XFS (sda2): Mounting Filesystem
[ 2.424175] firewire_core 0000:0b:09.1: created device fw0: GUID 001b24000079d679, S400
[ 2.609739] XFS (sda2): Ending clean mount
[ 2.929569] systemd-journald[91]: Received SIGTERM
[ 3.648396] SELinux: Disabled at runtime.
[ 3.648432] SELinux: Unregistering netfilter hooks
[ 3.669096] type=1404 audit(1424693641.597:2): selinux=0 auid=4294967295 ses=4294967295
[ 5.860403] systemd-readahead[336]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
[ 6.117564] systemd-journald[343]: Vacuuming done, freed 0 bytes
[ 7.613736] systemd-udevd[365]: starting version 208
[ 9.354483] device-mapper: uevent: version 1.0.3
[ 9.354567] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
[ 9.839309] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.007072] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102f conflicts with OpRegion 0x0000000000001000-0x000000000000107f (\PMIO) (20130517/utaddress-254)
[ 10.007081] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.007086] ACPI Warning: SystemIO range 0x00000000000011b0-0x00000000000011bf conflicts with OpRegion 0x0000000000001180-0x00000000000011bb (\GPIO) (20130517/utaddress-254)
[ 10.007091] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.007093] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011af conflicts with OpRegion 0x0000000000001180-0x00000000000011bb (\GPIO) (20130517/utaddress-254)
[ 10.007097] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.007099] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 10.359119] ACPI Warning: SystemIO range 0x0000000000001c00-0x0000000000001c1f conflicts with OpRegion 0x0000000000001c00-0x0000000000001c0f (\_SB_.PCI0.SBUS.SMBI) (20130517/utaddress-254)
[ 10.359128] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.738336] iTCO_vendor_support: vendor-support=0
[ 10.846401] sdhci: Secure Digital Host Controller Interface driver
[ 10.846405] sdhci: Copyright(c) Pierre Ossman
[ 10.846768] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 10.848544] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 10.848581] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 10.848692] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.995943] Linux video capture interface: v2.00
[ 11.084215] sdhci-pci 0000:0b:09.3: SDHCI controller found [104c:803c] (rev 0)
[ 11.084401] mmc0: SDHCI controller on PCI [0000:0b:09.3] using DMA
[ 11.096609] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 11.437395] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 11.437541] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 11.437609] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 11.695467] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (064e:a111)
[ 11.698070] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input11
[ 11.698195] usbcore: registered new interface driver uvcvideo
[ 11.698198] USB Video Class driver (1.1.1)
[ 12.465175] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 12.496658] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 12.513081] systemd-journald[343]: Received request to flush runtime journal from PID 1
[ 12.865649] type=1305 audit(1424693650.793:3): audit_pid=439 old=0 auid=4294967295 ses=4294967295 res=1
[ 14.444997] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 14.445427] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 17.666795] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 18.323071] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 18.709530] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 19.003864] Ebtables v2.0 registered
[ 19.197269] Bridge firewalling registered
[ 23.495590] sky2 0000:04:00.0 enp4s0: enabling interface
[ 23.495774] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 25.856241] sky2 0000:04:00.0 enp4s0: Link is up at 1000 Mbps, full duplex, flow control both
[ 25.856303] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment