Skip to content

Instantly share code, notes, and snippets.

@tonistiigi

tonistiigi/make-vagrant-smartos

Last active December 19, 2015 05:49
Show Gist options
  • Save tonistiigi/5907299 to your computer and use it in GitHub Desktop.
Save tonistiigi/5907299 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
make-vagrant-smartos
export BOXNAME=smartos01
export ISO=https://download.joyent.com/pub/iso/latest.iso
# Download iso
wget $ISO
# Create VM
VBoxManage createvm --name $BOXNAME --ostype OpenSolaris_64 --register
VBoxManage modifyvm $BOXNAME --memory 1024 --hwvirtex on --hwvirtexexcl off --nestedpaging on --largepages on --vtxvpid on --accelerate3d off --boot1 dvd --boot2 disk --acpi on
# Attach storage
VBoxManage createhd --filename boot.vmdk --size 1024 --format vmdk
VBoxManage createhd --filename zones.vmdk --size 40960 --format vmdk
VBoxManage storagectl $BOXNAME --name "SATA" --add sata
VBoxManage storageattach $BOXNAME --storagectl "SATA" --type dvddrive --port 0 --medium $(basename $ISO)
VBoxManage storageattach $BOXNAME --storagectl "SATA" --type hdd --port 1 --medium boot.vmdk
VBoxManage storageattach $BOXNAME --storagectl "SATA" --type hdd --port 2 --medium zones.vmdk
VBoxManage modifyvm $BOXNAME --natpf1 "ssh,tcp,,2222,,22"
# Boot from Virtualbox
# Set up password/default network. Select the second available HDD(first one will be used for booting).
# get tools-virtualbox from http://dlc-int.openindiana.org/aszeszo/vagrant/scripts/
# tools-virtualbox
curl http://dlc-int.openindiana.org/aszeszo/vagrant/scripts/opt-tools-virtualbox-20130407.tar.bz2 | tar -xjv
scp -r -P 2222 tools-virtualbox [email protected]:/opt/
#-> ssh [email protected] -p 2222
# /opt/tools-virtualbox/setup.sh
#<-
# Now would be a good time to make a clone of `zones.vmdk` so all manual steps can be skipped when making boxes. `zones.vmdk` only contains the configuration and `tools-virtualbox` so same disk can be used for newer versions of SmartOS.
scp -r -P 2222 prepare.sh [email protected]:
# get prepare-smartos-box.sh
-> ssh [email protected] -p 2222
./prepare.sh
# imgadm avail for other boxes
<-
VBoxManage storageattach $BOXNAME --storagectl "SATA" --port 0 --medium none
VBoxManage controlvm $BOXNAME poweroff
# Export vagrant box
mkdir out
VBoxManage export $BOXNAME -o out/box.ovf
# Not sure if this MAC is need or not.
# I used the one I got from `VBoxManage showvminfo smartos00 | grep "NIC 1"`
cat <<EOF >out/Vagrantfile
Vagrant.configure("2") do |config|
config.vm.guest = :solaris
config.vm.base_mac = "0800277B6DA7"
end
include_vagrantfile = File.expand_path("../include/_Vagrantfile", __FILE__)
load include_vagrantfile if File.exist?(include_vagrantfile)
EOF
cat <<EOF >out/metadata.json
{
"provider": "virtualbox"
}
EOF
cd out
tar -cvf $BOXNAME.tar *
gzip $BOXNAME.tar
mv $BOXNAME.tar.gz $BOXNAME.box
# Now you can import smartos00.box to vagrant
Raw
prepare.sh
export ZONE_IMAGE=9eac5c0c-a941-11e2-a7dc-57a6b041988f
export ZONE_HOSTNAME=vagrant-$(imgadm show $ZONE_IMAGE | json name version | tr -d \.|tr -d \\n)
export ZONE_BRAND=joyent
export CDROM=$(disklist -r|head -1)
export BOOTDISK=$(disklist -n|awk '{ print $1; exit }')
echo Mounting cdrom...
mkdir /mnt-cdrom
mount -F hsfs /dev/dsk/${CDROM}p0 /mnt-cdrom
echo Setting up the boot disk...
cat <<EOF | fdisk -F /dev/stdin /dev/rdsk/${BOOTDISK}p0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
EOF
NUMSECT=$(iostat -En $BOOTDISK | awk '/^Size:/ { sub("<",""); \
print $3/512 - 2048 }')
fdisk -A 12:128:0:0:0:0:0:0:2048:$NUMSECT /dev/rdsk/${BOOTDISK}p0
echo y|mkfs -F pcfs -o fat=32 /dev/rdsk/${BOOTDISK}p0:c
echo Mounting boot disk...
mkdir /mnt-boot
mount -F pcfs /dev/dsk/${BOOTDISK}p1 /mnt-boot
echo Copying SmartOS platform boot files to the boot disk...
rsync -a /mnt-cdrom/ /mnt-boot/
echo "Installing GRUB..."
grub --batch <<EOF >/dev/null 2>&1
device (hd0) /dev/dsk/${BOOTDISK}p0
root (hd0,0)
install /boot/grub/stage1 (hd0) (hd0,0)/boot/grub/stage2 p (hd0,0)/boot/grub/menu.lst
quit
EOF
echo "Fixing GRUB kernel & module menu.lst entries..."
sed -i '' -e 's%kernel /platform/%kernel (hd0,0)/platform/%' \
-e 's%module /platform/%module (hd0,0)/platform/%' \
/mnt-boot/boot/grub/menu.lst
echo "Setting GRUB timeout to 0s..."
sed -i '' 's/timeout=.*/timeout=0/' /mnt-boot/boot/grub/menu.lst
umount /mnt-cdrom
umount /mnt-boot
rmdir /mnt-cdrom
rmdir /mnt-boot
echo "Importing dataset..."
imgadm import $ZONE_IMAGE
cat <<EOF >/zones/zone.json
{
"zonename": "zone",
"hostname": "$ZONE_HOSTNAME",
"alias": "$ZONE_HOSTNAME",
"brand": "$ZONE_BRAND",
"image_uuid": "$ZONE_IMAGE",
"ram": 32768,
"quota": 1024,
"zonename": "zone",
"dns_domain": "localdomain",
"resolvers": [
"8.8.8.8",
"8.8.4.4"
],
"nics": [
{
"nic_tag": "admin",
"ip": "dhcp",
"primary": 1
}
]
}
EOF
vmadm create -f /zones/zone.json
zfs set quota=none zones/zone
zonecfg -z zone "set autoboot=false; remove rctl name=zone.cpu-shares; remove rctl name=zone.zfs-io-priority; remove rctl name=zone.max-lwps; remove rctl name=zone.max-physical-memory; remove rctl name=zone.max-locked-memory; remove rctl name=zone.max-swap"
echo Removing zone image...
zfs promote zones/zone
imgadm delete $ZONE_IMAGE
#zfs destroy zones/zone@zone
echo Creating /opt/custom/bin/autostart.sh...
mkdir -p /opt/custom/bin
cat <<EOAUTOSTARTSH >/opt/custom/bin/autostart.sh
#!/bin/bash
[[ -f /opt/tools-vmware/setup.sh ]] && /opt/tools-vmware/setup.sh
# VBOX_HARDDISK
svcadm enable -s svc:/network/physical:default
if svcs svc:/network/physical:default | grep ^maintenance >/dev/null; then
MAC=\$(dladm show-phys -m -p -o address|head -1)
cat <<EOF >/usbkey/config
coal=true
admin_nic=\$MAC
admin_ip=127.0.0.2
admin_netmask=255.255.255.255
EOF
sysinfo -u
svcadm disable -s svc:/network/physical:default
svcadm enable -s svc:/network/physical:default
fi
svcadm disable svc:/network/ntp:default
# this is to make smtp:sendmail SMF service start quicker
HOSTNAME=\$(hostname)
cat <<EOF >/etc/inet/hosts
::1 localhost
127.0.0.1 localhost loghost \${HOSTNAME} \${HOSTNAME}.localdomain
EOF
# power off GZ after zone is halted
for i in joyent joyent-minimal; do
cp /usr/lib/brand/\$i/statechange /tmp/statechange-\$i
sed -i '' 's%^exit 0%[[ "\$subcommand" == "post" \&\& \$cmd == 4 ]] \&\& svcadm enable -t poweroff%' /tmp/statechange-\$i
echo '[[ "\$subcommand" == "pre" && \$cmd == 0 ]] && svcadm disable poweroff' >> /tmp/statechange-\$i
echo exit 0 >>/tmp/statechange-\$i
mount -F lofs /tmp/statechange-\$i /usr/lib/brand/\$i/statechange
done
NIC=\$(dladm show-phys -po link)
MAC=\$(dladm show-phys -m -p -o address|head -1)
FAKEMAC=\$(dd if=/dev/urandom bs=1 count=3 2>/dev/null | od -tx1 | head -1 | cut -d' ' -f2- | awk '{ print "00:0c:29:"\$1":"\$2":"\$3 }')
ZONE=\$(zoneadm list -ic|grep -v ^global\$|head -1)
/usr/sbin/ifconfig \$NIC down
/usr/sbin/ifconfig \$NIC ether \$FAKEMAC
/usr/sbin/zonecfg -z \$ZONE "set autoboot=false; select net physical=net0; set mac-addr=\$MAC; end"
# remove VirtualBox/VMware specific zone config used for shared folders
FSALLOWED_NOVBOXFS=\$(zonecfg -z zone info fs-allowed|awk '{ print \$2 }'|sed 's/vboxfs//;s/,\$//')
if [[ -z \$FSALLOWED_NOVBOXFS ]]; then
zonecfg -z \$ZONE "clear fs-allowed"
else
zonecfg -z \$ZONE "set fs-allowed=\$FSALLOWED_NOVBOXFS"
fi
zonecfg -z \$ZONE "remove fs dir=/mnt/hgfs"
if prtconf -v|grep VMware >/dev/null; then
if [[ -f /opt/tools-vmware/setup.sh ]]; then
zonecfg -z \$ZONE "add fs; set dir=/mnt/hgfs; set special=/hgfs; set type=lofs; end"
/opt/tools-vmware/setup.sh
fi
fi
if prtconf -v|grep VBOX >/dev/null; then
if [[ -f /opt/tools-virtualbox/setup.sh ]]; then
if [[ -z \$FSALLOWED_NOVBOXFS ]]; then
zonecfg -z \$ZONE "set fs-allowed=vboxfs"
else
zonecfg -z \$ZONE "set fs-allowed=\${FSALLOWED_NOVBOXFS},vboxfs"
fi
/opt/tools-virtualbox/setup.sh
fi
fi
while ! svcs svc:/system/zones:default | grep ^online\ >/dev/null; do
sleep 1
done
/usr/sbin/zoneadm -z \$ZONE boot
EOAUTOSTARTSH
chmod +x /opt/custom/bin/autostart.sh
echo Creating /opt/custom/bin/poweroff.sh...
cat <<EOF >/opt/custom/bin/poweroff.sh
#!/bin/sh
sleep 2 && /usr/sbin/poweroff
EOF
chmod +x /opt/custom/bin/poweroff.sh
echo Creating /opt/custom/smf/autostart.xml...
mkdir -p /opt/custom/smf
cat <<EOSMF >/opt/custom/smf/autostart.xml
<?xml version="1.0"?>
<!DOCTYPE service_bundle SYSTEM "/usr/share/lib/xml/dtd/service_bundle.dtd.1">
<service_bundle type='manifest' name='autostart'>
<service
name='autostart'
type='service'
version='1'>
<create_default_instance enabled='true' />
<single_instance />
<dependency
name='fs-joyent'
grouping='require_all'
restart_on='none'
type='service'>
<service_fmri value='svc:/system/filesystem/smartdc' />
</dependency>
<exec_method
type='method'
name='start'
exec='/opt/custom/bin/autostart.sh'
timeout_seconds='0'>
</exec_method>
<exec_method
type='method'
name='stop'
exec=':true'
timeout_seconds='0'>
</exec_method>
<property_group name='startd' type='framework'>
<propval name='duration' type='astring' value='transient' />
</property_group>
<stability value='Unstable' />
</service>
</service_bundle>
EOSMF
echo Creating /opt/custom/smf/poweroff.xml...
mkdir -p /opt/custom/smf
cat <<EOSMF >/opt/custom/smf/poweroff.xml
<?xml version="1.0"?>
<!DOCTYPE service_bundle SYSTEM "/usr/share/lib/xml/dtd/service_bundle.dtd.1">
<service_bundle type='manifest' name='poweroff'>
<service
name='poweroff'
type='service'
version='1'>
<create_default_instance enabled='false' />
<single_instance/>
<exec_method
type='method'
name='start'
exec='/opt/custom/bin/poweroff.sh'
timeout_seconds='0'>
</exec_method>
<exec_method
type='method'
name='stop'
exec=':kill'
timeout_seconds='0'>
</exec_method>
<stability value='Unstable' />
</service>
</service_bundle>
EOSMF
echo Resetting /usbkey/config...
cat <<EOF >/usbkey/config
coal=true
admin_nic=ff:ff:ff:ff:ff:ff
admin_ip=127.0.0.2
admin_netmask=255.255.255.255
EOF
echo "Setting root's password to 'vagrant'..."
sed -i '' 's%^root:.*%root:$2a$04$q6gsOZZg2SsxTmTmgjR7CuylIGwVIp1F2/8zKeClDlbogWTLQA6C2:6445::::::%' /usbkey/shadow
chown root:sys /usbkey/shadow
echo "Cleaning up GZ..."
rm -f /var/ssh/ssh_host*
rm -f /var/adm/messages.*
rm -f /var/log/syslog.*
cp /dev/null /var/adm/messages
cp /dev/null /var/log/syslog
cp /dev/null /var/adm/wtmpx
cp /dev/null /var/adm/utmpx
echo "Configuring Zone..."
cat <<EOF >/zones/zone/root/root/configure.sh
#!/bin/bash
sed -i'' 's%^root:.*%root:\$2a\$04\$q6gsOZZg2SsxTmTmgjR7CuylIGwVIp1F2/8zKeClDlbogWTLQA6C2:6445::::::%' /etc/shadow
groupadd -g 1000 vagrant
useradd -g 1000 -u 1000 -m -d /home/vagrant -s /bin/bash vagrant
sed -i'' 's%^vagrant:.*%vagrant:\$2a\$04\$q6gsOZZg2SsxTmTmgjR7CuylIGwVIp1F2/8zKeClDlbogWTLQA6C2:6445::::::%' /etc/shadow
chown root:sys /etc/shadow
mkdir -p ~vagrant/.ssh
cat <<EOKEY >~vagrant/.ssh/authorized_keys
ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEA6NF8iallvQVp22WDkTkyrtvp9eWW6A8YVr+kz4TjGYe7gHzIw+niNltGEFHzD8+v1I2YJ6oXevct1YeS0o9HZyN1Q9qgCgzUFtdOKLv6IedplqoPkcmF0aYet2PkEDo3MlTBckFXPITAMzF8dJSIFo9D8HfdOV0IAdx4O7PtixWKn5y2hMNG0zQPyUecp4pzC6kivAIhyfHilFR61RGL+GPXQ2MWZWFYbAGjyiYJnAmCP3NOTd0jMZEnDkbUvxhMmBYSdETk1rRgm+R4LOzFUGaHqHDLKLX+FIPKcF96hrucXzcWyLbIbEgE98OHlnVYCzRdK8jlqm8tehUc9c9WhQ== vagrant insecure public key
EOKEY
chown -R 1000:1000 ~vagrant/.ssh
chmod 700 ~vagrant/.ssh
chmod 600 ~vagrant/.ssh/authorized_keys
usermod -P "Primary Administrator" vagrant
for sudoers in /etc/sudoers /opt/local/etc/sudoers /ec/etc/sudoers; do
if [[ -f \$sudoers ]]; then
if ! grep ^vagrant \$sudoers >/dev/null; then
echo "vagrant ALL=(ALL) NOPASSWD: ALL" >>\$sudoers
fi
fi
done
rm -f /var/ssh/ssh_host* /ec/etc/ssh/ssh_host*
rm -f /var/ssh/ssh_host*
rm -f /var/adm/messages.*
rm -f /var/log/syslog.*
cp /dev/null /var/adm/messages
cp /dev/null /var/log/syslog
cp /dev/null /var/adm/wtmpx
cp /dev/null /var/adm/utmpx
rm -f /root/.bash_history /home/vagrant/.bash_history
unset HISTFILE
history -c
EOF
zlogin zone /bin/bash /root/configure.sh
rm /zones/zone/root/root/configure.sh
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment