Skip to content

Instantly share code, notes, and snippets.

@tooluser

tooluser/hubitat-pe653.groovy

Created October 11, 2018 22:17
Show Gist options
  • Save tooluser/6e513dba13bb675584f1eacce5625710 to your computer and use it in GitHub Desktop.
Save tooluser/6e513dba13bb675584f1eacce5625710 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
hubitat-pe653.groovy
/**
* Intermatic PE653 Pool Control System
*
* Original Copyright 2014 bigpunk6
* Updated 2016 - 2018 KeithR26
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
* in compliance with the License. You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
* on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
* for the specific language governing permissions and limitations under the License.
*
* This DTH is now a "Composite Device Type Handler" which supports multiple "Child" devices that appear in
* the "Things" list and can be used by SmartApps to control the 5 switches, Pool/Spa mode and 4 VSP speeds.
* This requires a second DTH be installed: erocm123 / Switch Child Device
*
* Don't use SamrtThings Multi-channel (deprecated) or Cooper Lee's code (vTile_ms, ms_w_vts). These are incompatible
* with the Composite DTH architecture.
*
* To convert to Hubitat:
* 1. Replace All: "physicalgraph." with "hubitat."
* 2. around line 1330, Comment out ST lines, comment in HE lines
*
* Version History
* Ver Date Author Changes
* 1.00 06/15/2016 bigpunk6 Latest version from the original author
* 2.00 07/14/2016 KeithR26 Updates to make this work with Intermatic firmware v3.4
* Added Pool/Spa mode and initial VSP support
* 2.01 08/10/2016 KeithR26 Major UI redesign
* Added 4 switches to set VSP speeds and off
* Added 4 "Multi-channel" endpoints for ST VSP control
* Added configurable Z-Wave delay
* Added PE653 configuration diagnostics in Debug level = High
* Added Version Info in IDE and logs
* Allow changing icon
* 2.02 04/26/2017 KeithR26 Fix Thermostat set for v3.4 firmware (force scale = 0)
* Prototype Pool Light Color Control
* Implement simple "Macros"
* 2.03 05/01/2017 KeithR26 Refresh water temp when UI temp is tapped
* 2.04 05/07/2017 KeithR26 Allow negative temperature offsets. Limit offets to +/- 5 (max supported by PE653)
* 2.05 05/13/2017 KeithR26 Debug version for Android. Never committed to master
* 2.06 05/13/2017 KeithR26 Update to fix Temperature display on Android
* 3.00 07/05/2018 KeithR26 Change to "Composite" DTH since ST deprecated the Multi-channel SmartApp
* Improves VSP integration. No more schedules.
* Reorganized UI. Display Air temp, Heater on/off and Clock.
* Minor adjustments for Hubitat compatibility.
* Remove defaults to fix Android config issues.
* 3.01 07/06/2018 KeithR26 Added second Air Temperature. Now displays both Freeze and Solar temps.
* 3.02 07/07/2018 KeithR26 Avoid sending events and warnings if no VSP
* 3.03 07/15/2018 KeithR26 More minor adjustments to improve Hubitat compatibility
* 3.04 07/15/2018 KeithR26 Added setSchedule, resetSchedule, getSchedules, and setVSPSpeeds commands
* Added Schedule events
* 07/22/2018 KeithR26 Due to different Intermatic firmware sub-versions of v3.4, alternate Setpoint "scale" if SetPointSet is ignored ("learn")
* Fix negative air and solar temperature display
* 08/09/2018 KeithR26 Fixes to getSchedules.
* Fix QuickGetWaterTemp
* Fix update of "Set Mode" labels on the UI
* 3.05 08/19/2018 KeithR26 Finish off Schedule functions
* POssible fix to set Clock
* Fix Light Color slider
* 3.06 08/30/2018 KeithR26 Make temperature events visible
* Suppress redundant events
*/
def getVERSION () {"Ver 3.06"} // Keep track of handler version
metadata {
definition (name: "Intermatic Pool Control System", author: "KeithR26", namespace: "KeithR26") {
capability "Actuator"
capability "Switch"
capability "Polling"
capability "Configuration"
capability "Refresh"
capability "Temperature Measurement"
capability "Sensor"
capability "Zw Multichannel"
capability "Thermostat"
// capability "Update"
attribute "operationMode", "string"
attribute "firemanTimeout", "string"
attribute "temperature", "string"
attribute "temperatureOffsets", "string"
attribute "poolspaConfig", "string"
attribute "poolSetpoint", "string"
attribute "spaSetpoint", "string"
attribute "poolSpaMode", "string"
attribute "lightColor", "string"
attribute "lightCircuits", "string"
attribute "ccVersions", "string"
attribute "VersionInfo", "string"
attribute "ManufacturerInfo", "string"
attribute "debugLevel", "string"
attribute "switch1", "string"
attribute "switch2", "string"
attribute "switch3", "string"
attribute "switch4", "string"
attribute "switch5", "string"
attribute "swVSP1", "string"
attribute "swVSP2", "string"
attribute "swVSP3", "string"
attribute "swVSP4", "string"
attribute "schedules", "JSON_OBJECT"
attribute "lastScheduleChg", "string"
attribute "VSPSpeeds", "string"
command "poll"
command "quickSetPool", ["number"]
command "quickSetSpa", ["number"]
command "quickGetWaterTemp"
command "quickGetTestCmds"
command "setPoolMode"
command "setSpaMode"
command "togglePoolSpaMode"
command "childOn"
command "childOff"
command "on1"
command "off1"
command "on2"
command "off2"
command "on3"
command "off3"
command "on4"
command "off4"
command "on5"
command "off5"
command "setVSPSpeed", ["number"]
command "setVSPSpeed0"
command "setVSPSpeed1"
command "setVSPSpeed2"
command "setVSPSpeed3"
command "setVSPSpeed4"
command "setMode1"
command "setMode2"
command "setMode3"
command "setMode4"
command "setLightColor", ["number"]
command "setColor"
command "setClock"
command "getSchedules", ["number"]
command "setSchedule", ["number","number","number","number","number","number"]
command "resetSchedule", ["number","number"]
command "setVSPSpeeds"
command "insertLogTrace"
// command "updated"
fingerprint deviceId: "0x1001", inClusters: "0x91,0x73,0x72,0x86,0x81,0x60,0x70,0x85,0x25,0x27,0x43,0x31", outClusters: "0x82"
}
preferences {
input "operationMode1", "enum", title: "Boster/Cleaner Pump",
options:[[1:"No"],
[2:"Uses Circuit-1"],
[3:"Variable Speed pump Speed-1"],
[4:"Variable Speed pump Speed-2"],
[5:"Variable Speed pump Speed-3"],
[6:"Variable Speed pump Speed-4"]]
input "operationMode2", "enum", title: "Pump Type",
options:[[0:"1 Speed Pump without Booster/Cleaner"],
[1:"1 Speed Pump with Booster/Cleaner"],
[2:"2 Speed Pump without Booster/Cleaner"],
[3:"2 Speed Pump with Booster/Cleaner"],
[4:"Variable Speed Pump without Booster/Cleaner"],
[5:"Variable Speed Pump with Booster/Cleaner"],
[6:"Reserved 6"],
[7:"Reserved 7"]]
input "poolSpa1", "enum", title: "Pool or Spa",
options:[[0:"Pool"],
[1:"Spa"],
[2:"Both"]]
input "fireman", "enum", title: "Fireman Timeout",
options:[["255":"No heater installed"],
["0":"No cool down period"],
["1":"1 minute"],
["2":"2 minute"],
["3":"3 minute"],
["4":"4 minute"],
["5":"5 minute"],
["6":"6 minute"],
["7":"7 minute"],
["8":"8 minute"],
["9":"9 minute"],
["10":"10 minute"],
["11":"11 minute"],
["12":"12 minute"],
["13":"13 minute"],
["14":"14 minute"],
["15":"15 minute"]]
input "tempOffsetwater", "number", title: "Water temperature offset", range: "-5..5", defaultValue: 0, required: true
input "tempOffsetair", "number",
title: "Air temperature offset - Sets the Offset of the air temperature for the add-on Thermometer in degrees Fahrenheit -5F to +5F", range: "-5..5", defaultValue: 0, required: true
input "debugLevel", "enum", title: "Debug Level", multiple: "true",
options:[[0:"Off"],
[1:"Low"],
[2:"High"]], defaultvalue: 0
input "ZWdelay", "number",
title: "Delay between Z-Wave commands sent (milliseconds). Suggest 1000.", defaultValue: 1000, required: true
//Mode 1
input "M1Label", "text", title: "M1: Display Name:", defaultValue: ""
input "M1Sw1", "enum", title: "M1: Circuit 1 action:", defaultValue: 0,
options:[[0:"No Change"],
[1:"On"],
[2:"Off"]]
input "M1Sw2", "enum", title: "M1: Circuit 2 action:", defaultValue: 0,
options:[[0:"No Change"],
[1:"On"],
[2:"Off"]]
input "M1Sw3", "enum", title: "M1: Circuit 3 action:", defaultValue: 0,
options:[[0:"No Change"],
[1:"On"],
[2:"Off"]]
input "M1Sw4", "enum", title: "M1: Circuit 4 action:", defaultValue: 0,
options:[[0:"No Change"],
[1:"On"],
[2:"Off"]]
input "M1Sw5", "enum", title: "M1: Circuit 5 action:", defaultValue: 0,
options:[[0:"No Change"],
[1:"On"],
[2:"Off"]]
input "M1Mode", "enum", title: "M1: Mode to change to:", defaultValue: 0,
options:[[0:"No change"],
[1:"Pool"],
[2:"Pool & Set Temperature"],
[3:"Spa"],
[4:"Spa & Set Temperature"]]
input "M1Temp", "number", title: "M1: Set Temperature to:", range: "40..104", defaultValue: 40
input "M1VSP", "enum", title: "M1: Set VSP Speed to:", defaultValue: 0,
options:[[5:"No change"],
[1:"Speed 1"],
[2:"Speed 2"],
[3:"Speed 3"],
[4:"Speed 4"],
[0:"Turn off"]]
//Mode 2
input "M2Label", "text", title: "M2: Display Name:", defaultValue: ""
input "M2Sw1", "enum", title: "M2: Circuit 1 action:", defaultValue: 0,
options:[[0:"No Change"],
[1:"On"],
[ 2:"Off"]]
input "M2Sw2", "enum", title: "M2: Circuit 2 action:", defaultValue: 0,
options:[[0:"No Change"],
[1:"On"],
[2:"Off"]]
input "M2Sw3", "enum", title: "M2: Circuit 3 action:", defaultValue: 0,
options:[[0:"No Change"],
[1:"On"],
[2:"Off"]]
input "M2Sw4", "enum", title: "M2: Circuit 4 action:", defaultValue: 0,
options:[[0:"No Change"],
[1:"On"],
[2:"Off"]]
input "M2Sw5", "enum", title: "M2: Circuit 5 action:", defaultValue: 0,
options:[[0:"No Change"],
[1:"On"],
[2:"Off"]]
input "M2Mode", "enum", title: "M2: Mode to change to:", defaultValue: 0,
options:[[0:"No change"],
[1:"Pool"],
[2:"Pool & Set Temperature"],
[3:"Spa"],
[4:"Spa & Set Temperature"]]
input "M2Temp", "number", title: "M2: Set Temperature to:", range: "40..104", defaultValue: 40
input "M2VSP", "enum", title: "M2: Set VSP Speed to:", defaultValue: 0,
options:[[5:"No change"],
[1:"Speed 1"],
[2:"Speed 2"],
[3:"Speed 3"],
[4:"Speed 4"],
[0:"Turn off"]]
//Mode 3
input "M3Label", "text", title: "M3: Display Name:", defaultValue: ""
input "M3Sw1", "enum", title: "M3: Circuit 1 action:", defaultValue: 0,
options:[[0:"No Change"],
[1:"On"],
[2:"Off"]]
input "M3Sw2", "enum", title: "M3: Circuit 2 action:", defaultValue: 0,
options:[[0:"No Change"],
[1:"On"],
[2:"Off"]]
input "M3Sw3", "enum", title: "M3: Circuit 3 action:", defaultValue: 0,
options:[[0:"No Change"],
[1:"On"],
[2:"Off"]]
input "M3Sw4", "enum", title: "M3: Circuit 4 action:", defaultValue: 0,
options:[[0:"No Change"],
[1:"On"],
[2:"Off"]]
input "M3Sw5", "enum", title: "M3: Circuit 5 action:", defaultValue: 0,
options:[[0:"No Change"],
[1:"On"],
[2:"Off"]]
input "M3Mode", "enum", title: "M3: Mode to change to:", defaultValue: 0,
options:[[0:"No change"],
[1:"Pool"],
[2:"Pool & Set Temperature"],
[3:"Spa"],
[4:"Spa & Set Temperature"]]
input "M3Temp", "number", title: "M3: Set Temperature to:", range: "40..104", defaultValue: 40
input "M3VSP", "enum", title: "M3: Set VSP Speed to:", defaultValue: 0,
options:[[5:"No change"],
[1:"Speed 1"],
[2:"Speed 2"],
[3:"Speed 3"],
[4:"Speed 4"],
[0:"Turn off"]]
//Mode 4
input "M4Label", "text", title: "M4: Display Name:", defaultValue: ""
input "M4Sw1", "enum", title: "M4: Circuit 1 action:", defaultValue: 0,
options:[[0:"No Change"],
[1:"On"],
[2:"Off"]]
input "M4Sw2", "enum", title: "M4: Circuit 2 action:", defaultValue: 0,
options:[[0:"No Change"],
[1:"On"],
[2:"Off"]]
input "M4Sw3", "enum", title: "M4: Circuit 3 action:", defaultValue: 0,
options:[[0:"No Change"],
[1:"On"],
[2:"Off"]]
input "M4Sw4", "enum", title: "M4: Circuit 4 action:", defaultValue: 0,
options:[[0:"No Change"],
[1:"On"],
[2:"Off"]]
input "M4Sw5", "enum", title: "M4: Circuit 5 action:", defaultValue: 0,
options:[[0:"No Change"],
[1:"On"],
[2:"Off"]]
input "M4Mode", "enum", title: "M4: Mode to change to:", defaultValue: 0,
options:[[0:"No change"],
[1:"Pool"],
[2:"Pool & Set Temperature"],
[3:"Spa"],
[4:"Spa & Set Temperature"]]
input "M4Temp", "number", title: "M4: Set Temperature to:", range: "40..104", defaultValue: 40
input "M4VSP", "enum", title: "M4: Set VSP Speed to:", defaultValue: 0,
options:[[5:"No change"],
[1:"Speed 1"],
[2:"Speed 2"],
[3:"Speed 3"],
[4:"Speed 4"],
[0:"Turn off"]]
input "C1ColorEnabled", "enum", title: "Circuit 1 Color Light Enable:", defaultValue: 0,
options:[[0:"off"],
[1:"On"]]
input "C2ColorEnabled", "enum", title: "Circuit 2 Color Light Enable:", defaultValue: 0,
options:[[0:"off"],
[1:"On"]]
input "C3ColorEnabled", "enum", title: "Circuit 3 Color Light Enable:", defaultValue: 0,
options:[[0:"off"],
[1:"On"]]
input "C4ColorEnabled", "enum", title: "Circuit 4 Color Light Enable:", defaultValue: 0,
options:[[0:"off"],
[1:"On"]]
input "C5ColorEnabled", "enum", title: "Circuit 5 Color Light Enable:", defaultValue: 0,
options:[[0:"off"],
[1:"On"]]
}
// tile definitions
tiles(scale: 2) {
valueTile("mainTile", "device.temperature", width: 2, height: 2, inactiveLabel: true ) {
state "temperature", label:'${currentValue}°', action: "quickGetWaterTemp",icon: "st.Health & Wellness.health2",
backgroundColors:[
[value: 32, color: "#153591"],
[value: 54, color: "#1e9cbb"],
[value: 64, color: "#90d2a7"],
[value: 74, color: "#44b621"],
[value: 90, color: "#f1d801"],
[value: 98, color: "#d04e00"],
[value: 110, color: "#bc2323"]
]
}
valueTile("temperatureTile", "device.temperature", width: 2, height: 2, inactiveLabel: true ) {
state "temperature", label:'${currentValue}°', action: "quickGetWaterTemp",
backgroundColors:[
[value: 32, color: "#153591"],
[value: 54, color: "#1e9cbb"],
[value: 64, color: "#90d2a7"],
[value: 74, color: "#44b621"],
[value: 90, color: "#f1d801"],
[value: 98, color: "#d04e00"],
[value: 110, color: "#bc2323"]
]
}
valueTile("airTempFTile", "device.airTempFreeze", width: 1, height: 1, inactiveLabel: true ) {
state "airTemp", label:'${currentValue}°',
backgroundColors:[
[value: 0, color: "#ffffff"],
[value: 32, color: "#153591"],
[value: 54, color: "#1e9cbb"],
[value: 64, color: "#90d2a7"],
[value: 74, color: "#44b621"],
[value: 90, color: "#f1d801"],
[value: 98, color: "#d04e00"],
[value: 110, color: "#bc2323"]
]
}
valueTile("airTempSTile", "device.airTempSolar", width: 1, height: 1, inactiveLabel: true ) {
state "airTemp", label:'${currentValue}°',
backgroundColors:[
[value: 0, color: "#ffffff"],
[value: 32, color: "#153591"],
[value: 54, color: "#1e9cbb"],
[value: 64, color: "#90d2a7"],
[value: 74, color: "#44b621"],
[value: 90, color: "#f1d801"],
[value: 98, color: "#d04e00"],
[value: 110, color: "#bc2323"]
]
}
valueTile("airTempLabel", "device.airTempLabel", width: 1, height: 1, inactiveLabel: false, decoration: "flat") {
state "airTemp", label:' AIR: Frz/Sol', action:"quickGetTestCmds", backgroundColor:"#ffffff"
}
controlTile("poolSliderControl", "device.poolSetpoint", "slider", width: 2, height: 1, inactiveLabel: false, range:"(39..104)") {
state "PoolSetpoint", action:"quickSetPool", backgroundColor:"#d04e00"
}
valueTile("poolSetpoint", "device.poolSetpoint", width: 1, height: 1, inactiveLabel: false, decoration: "flat") {
state "pool", label:' POOL:', backgroundColor:"#ffffff"
}
controlTile("spaSliderControl", "device.spaSetpoint", "slider", width: 2, height: 1, inactiveLabel: false, range:"(39..104)") {
state "SpaSetpoint", action:"quickSetSpa", backgroundColor: "#1e9cbb"
}
valueTile("spaSetpoint", "device.spaSetpoint", width: 1, height: 1, inactiveLabel: false, decoration: "flat") {
state "spa", label:' SPA:', backgroundColor:"#ffffff"
}
controlTile("lightColorSliderControl", "device.lightColor", "slider", width: 2, height: 1, inactiveLabel: false, range:"(1..14)") {
state "color", action:"setLightColor", backgroundColor:"#d04e00"
}
valueTile("lightColor", "device.lightColorBtn", width: 1, height: 1, inactiveLabel: true, decoration: "flat") {
state "color", action:"setColor", label:'COLOR:', backgroundColor:"#ffffff"
}
standardTile("poolSpaMode", "device.poolSpaMode", width: 2, height: 2, decoration: "flat") {
state "on", label: "", action: "setPoolMode", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/spa.png", backgroundColor: "#79b821", nextState: "turningOff"
state "off", label: "", action: "setSpaMode", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/Pool.png", backgroundColor: "#ffffff", nextState: "turningOn"
state "turningOn", label: 'changing', action: "setPoolMode", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/spa.png", backgroundColor: "#79b821", nextState: "turningOff"
state "turningOff", label: 'changing', action: "setSpaMode", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/Pool.png", backgroundColor: "#ffffff", nextState: "turningOn"
state "disabled", label:'', icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/all-white.png", backgroundColor: "#ffffff"
}
standardTile("switch1", "device.switch1", width: 1, height: 1, decoration: "flat") {
state "on", label: "on", action: "off1", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/sw1-on.png", backgroundColor: "#79b821", nextState: "turningOff"
state "off", label: "off", action: "on1", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/sw1-off.png", backgroundColor: "#ffffff", nextState: "turningOn"
state "turningOn", label:'Turning on', action: "off1", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/sw1-on.png", backgroundColor: "#79b821", nextState: "turningOff"
state "turningOff", label:'Turning off', action: "on1", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/sw1-off.png", backgroundColor: "#ffffff", nextState: "turningOn"
}
standardTile("switch2", "device.switch2", width: 1, height: 1, decoration: "flat") {
state "on", label: "on", action: "off2", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/sw2-on.png", backgroundColor: "#79b821", nextState: "turningOff"
state "off", label: "off", action: "on2", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/sw2-off.png", backgroundColor: "#ffffff", nextState: "turningOn"
state "turningOn", label:'Turning on', action: "off2", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/sw2-on.png", backgroundColor: "#79b821", nextState: "turningOff"
state "turningOff", label:'Turning off', action: "on2", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/sw2-off.png", backgroundColor: "#ffffff", nextState: "turningOn"
}
standardTile("switch3", "device.switch3", width: 1, height: 1, decoration: "flat") {
state "on", label: "on", action: "off3", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/sw3-on.png", backgroundColor: "#79b821", nextState: "turningOff"
state "off", label: "off", action: "on3", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/sw3-off.png", backgroundColor: "#ffffff", nextState: "turningOn"
state "turningOn", label:'Turning on', action: "off3", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/sw3-on.png", backgroundColor: "#79b821", nextState: "turningOff"
state "turningOff", label:'Turning off', action: "on3", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/sw3-off.png", backgroundColor: "#ffffff", nextState: "turningOn"
}
standardTile("switch4", "device.switch4", width: 1, height: 1, decoration: "flat") {
state "on", label: "on", action: "off4", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/sw4-on.png", backgroundColor: "#79b821", nextState: "turningOff"
state "off", label: "off", action: "on4", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/sw4-off.png", backgroundColor: "#ffffff", nextState: "turningOn"
state "turningOn", label:'Turning on', action: "off4", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/sw4-on.png", backgroundColor: "#79b821", nextState: "turningOff"
state "turningOff", label:'Turning off', action: "on4", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/sw4-off.png", backgroundColor: "#ffffff", nextState: "turningOn"
}
standardTile("switch5", "device.switch5", width: 1, height: 1, decoration: "flat") {
state "on", label: "on", action: "off5", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/sw5-on.png", backgroundColor: "#79b821", nextState: "turningOff"
state "off", label: "off", action: "on5", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/sw5-off.png", backgroundColor: "#ffffff", nextState: "turningOn"
state "turningOn", label:'Turning on', action: "off5", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/sw5-on.png", backgroundColor: "#79b821", nextState: "turningOff"
state "turningOff", label:'Turning off', action: "on5", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/sw5-off.png", backgroundColor: "#ffffff", nextState: "turningOn"
}
standardTile("swVSP1", "device.swVSP1", width: 1, height: 1, decoration: "flat") {
state "off", label: "off", action: "setVSPSpeed1", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/vsp1-off.png", backgroundColor: "#ffffff", nextState: "turningOn"
state "on", label: "on", action: "setVSPSpeed0", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/vsp1-on.png", backgroundColor: "#79b821", nextState: "turningOff"
state "turningOn", label:'Turning on', action: "setVSPSpeed0", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/vsp1-on.png", backgroundColor: "#79b821", nextState: "turningOff"
state "turningOff", label:'Turning off', action: "setVSPSpeed1", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/vsp1-off.png", backgroundColor: "#ffffff", nextState: "turningOn"
state "disabled", label:'', icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/all-white.png",backgroundColor: "#ffffff"
}
standardTile("swVSP2", "device.swVSP2", width: 1, height: 1, decoration: "flat") {
state "off", label: "off", action: "setVSPSpeed2", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/vsp2-off.png", backgroundColor: "#ffffff", nextState: "turningOn"
state "on", label: "on", action: "setVSPSpeed0", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/vsp2-on.png", backgroundColor: "#79b821", nextState: "turningOff"
state "turningOn", label:'Turning on', action: "setVSPSpeed0", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/vsp2-on.png", backgroundColor: "#79b821", nextState: "turningOff"
state "turningOff", label:'Turning off', action: "setVSPSpeed2", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/vsp2-off.png", backgroundColor: "#ffffff", nextState: "turningOn"
state "disabled", label:'', icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/all-white.png",backgroundColor: "#ffffff"
}
standardTile("swVSP3", "device.swVSP3", width: 1, height: 1, decoration: "flat") {
state "off", label: "off", action: "setVSPSpeed3", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/vsp3-off.png", backgroundColor: "#ffffff", nextState: "turningOn"
state "on", label: "on", action: "setVSPSpeed0", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/vsp3-on.png", backgroundColor: "#79b821", nextState: "turningOff"
state "turningOn", label:'Turning on', action: "setVSPSpeed0", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/vsp3-on.png", backgroundColor: "#79b821", nextState: "turningOff"
state "turningOff", label:'Turning off', action: "setVSPSpeed3", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/vsp3-off.png", backgroundColor: "#ffffff", nextState: "turningOn"
state "disabled", label:'', icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/all-white.png",backgroundColor: "#ffffff"
}
standardTile("swVSP4", "device.swVSP4", width: 1, height: 1, decoration: "flat") {
state "off", label: "off", action: "setVSPSpeed4", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/vsp4-off.png", backgroundColor: "#ffffff", nextState: "turningOn"
state "on", label: "on", action: "setVSPSpeed0", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/vsp4-on.png", backgroundColor: "#79b821", nextState: "turningOff"
state "turningOn", label:'Turning on', action: "setVSPSpeed0", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/vsp4-on.png", backgroundColor: "#79b821", nextState: "turningOff"
state "turningOff", label:'Turning off', action: "setVSPSpeed4", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/vsp4-off.png", backgroundColor: "#ffffff", nextState: "turningOn"
state "disabled", label:'', icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/all-white.png",backgroundColor: "#ffffff"
}
standardTile("swM1", "device.swM1", width: 1, height: 1, decoration: "flat") {
state "disabled", label:'', action: "setMode1", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/M1-off.png",backgroundColor: "#ffffff", nextState: "disabled"
}
standardTile("swM2", "device.swM2", width: 1, height: 1, decoration: "flat") {
state "disabled", label:'', action: "setMode2", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/M2-off.png",backgroundColor: "#ffffff", nextState: "disabled"
}
standardTile("swM3", "device.swM3", width: 1, height: 1, decoration: "flat") {
state "disabled", label:'', action: "setMode3", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/M3-off.png",backgroundColor: "#ffffff", nextState: "disabled"
}
standardTile("swM4", "device.swM4", width: 1, height: 1, decoration: "flat") {
state "disabled", label:'', action: "setMode4", icon: "https://raw.githubusercontent.com/KeithR26/Intermatic-PE653/master/M4-off.png", backgroundColor:"#ffffff", nextState: "disabled"
}
valueTile("M1Name", "device.M1Name", width: 2, height: 1, inactiveLabel: false, decoration: "flat") {
state "M1Name", label:'${currentValue}', backgroundColor:"#ffffff", action: "setMode1"
}
valueTile("M2Name", "device.M2Name", width: 2, height: 1, inactiveLabel: false, decoration: "flat") {
state "M2Name", label:'${currentValue}', backgroundColor:"#ffffff", action: "setMode2"
}
valueTile("M3Name", "device.M3Name", width: 2, height: 1, inactiveLabel: false, decoration: "flat") {
state "M3Name", label:'${currentValue}', backgroundColor:"#ffffff", action: "setMode3"
}
valueTile("M4Name", "device.M4Name", width: 2, height: 1, inactiveLabel: false, decoration: "flat") {
state "M4Name", label:'${currentValue}', backgroundColor:"#ffffff", action: "setMode4"
}
standardTile("blank1", "device.blank", width: 2, height: 1, decoration: "flat") {
state "on", icon: "st.Health & Wellness.health2", backgroundColor: "#ffffff"
}
standardTile("refresh", "device.switch", width: 1, height: 1, inactiveLabel: false, decoration: "flat") {
state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
}
standardTile("insertLogTrace", "something", width: 6, height: 1, inactiveLabel: false, decoration: "flat") {
state "default", label:"Insert Trace in Log", action: "insertLogTrace"
}
valueTile("clock", "device.clock", width: 2, height: 1, inactiveLabel: false, decoration: "flat") {
state "clockName", label:'${currentValue}', backgroundColor:"#ffffff", action: "setClock"
}
valueTile("heaterLabel", "device.heaterLabel", width: 1, height: 1, inactiveLabel: false, decoration: "flat") {
state "airTemp", label:' HEAT:', backgroundColor:"#ffffff"
}
standardTile("heaterTile", "device.heater", width: 2, height: 1, canChangeIcon: true) {
state "off", label: "heater off", icon: "st.Health & Wellness.health2", backgroundColor: "#ffffff"
state "on", label: "*HEATING*", icon: "st.Health & Wellness.health2", backgroundColor: "#bc2323"
}
// standardTile("configure", "device.configure", width: 1, height: 1, inactiveLabel: false, decoration: "flat") {
// state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
// }
standardTile("blank3", "device.blank3", width: 1, height: 1, decoration: "flat") {
state "on", label: "", icon: "st.Health & Wellness.health2", backgroundColor: "#ffffff"
}
main "mainTile"
details([
"blank3",
"switch1","switch2","switch3","switch4","switch5",
"poolSpaMode",
"temperatureTile",
"swVSP1","swVSP2","swVSP3","swVSP4",
"poolSetpoint", "poolSliderControl",
"swM1", "M1Name",
"spaSetpoint", "spaSliderControl",
"swM2", "M2Name",
"lightColor","lightColorSliderControl",
"swM3", "M3Name",
"heaterLabel", "heaterTile",
"swM4", "M4Name",
"airTempLabel", "airTempFTile", "airTempSTile",
"refresh",
"clock",
// "blank1",
// "configure",
])
}
}
// Constants for PE653 configuration parameter locations
def getDELAY () {ZWdelay} // How long to delay between commands to device (configured)
def getMIN_DELAY () {"800"} // Minimum delay between commands to device (configured)
def getSWITCH_SCHED_PARAM (int sw, int sch) { (4 + (sw-1)*3 + (sch-1)) } // Configuration schedule for switch 1-5
def getVSP_RPM_SCHED_PARAM (int sp) { (32 + (sp-1))} // Configuration schedule for VSP RPM Speeds 1-4
def getVSP_RPMMAX_SCHED_PARAM () { (49) } // VSP RPM Max speed Schedule 0x31
def getPOOL_SPA_SCHED_PARAM (int sch) { 19 + (sch-1) } // Pool/Spa mode Schedule 1-3 - 0x13
def getPOOL_SPA_CONFIG () { 22 } // Pool/Spa mode Mode - 0x16
def getVSP_SCHED_PARAM (int sp, int sch) { (36 + (sp-1)*3 + (sch-1)) } // VSP Speed 1-4 Schedule 1-3 - 0x24
def getPOOL_SPA_CHAN () { 39 } // Pool/Spa channel - 0x27
def getPOOL_SPA_EP () { 6 } // Pool/Spa endpoint - 6
def getVSP_SPEED (int sched) { ((sched - 35) / 3) } // Convert from sched to speed
def getVSP_CHAN_NO (int spd) { (16 + (spd - 1)) } // VSP Speed 1 Channel - 0x10 - 0x13
def getVSP_EP (int spd) { (6 + spd) } // VSP Endpoint 7 - 10
def getVSP_SPEED_FROM_CHAN (int chan) { ((chan - 16) + 1) } // Convert from channel to speed - 0x10
def getVSP_ENABLED () { (operationMode2 >= "4") ? 1 : 0 } // True if a Variable Speed Pump Configured
def getPOOL_SPA_COMBO () { (poolSpa1 == "2") ? 1 : 0 } // True if both Pool and Spa
def getSWITCH_NAME (int instance) {
def swNames = ["switch1","switch2","switch3","switch4","switch5","poolSpaMode","swVSP1","swVSP2","swVSP3","swVSP4"]
return swNames[instance - 1]
}
def getSCHED_PARAM (int ep, int sch) {
if (ep >= 1 && ep <= 5) {return getSWITCH_SCHED_PARAM(ep, sch)}
if (ep == 6) {return getPOOL_SPA_SCHED_PARAM(sch)}
if (ep >= 7 && ep <= 10) {return getVSP_SCHED_PARAM(ep-6, sch)}
return 0
}
def getEP_FROM_SCHED_PARM (int paramNum) {
if (paramNum >= getSCHED_PARAM (1, 1) && paramNum <= getSCHED_PARAM (5, 3)) {return ((paramNum - getSCHED_PARAM(1,1)).intdiv(3) + 1)}
if (paramNum >= getSCHED_PARAM (6, 1) && paramNum <= getSCHED_PARAM (6, 3)) {return 6}
if (paramNum >= getSCHED_PARAM (7, 1) && paramNum <= getSCHED_PARAM (10, 3)) {return ((paramNum - getSCHED_PARAM(7,1)).intdiv(3) + 1 + 6)}
return 0
}
// Return the list supported command classes by PE653. The following are the versions for firmware v3.4
// ccVersions: {"20":1,"25":1,"27":1,"31":1,"43":1,"60":2,"70":1,"72":1,"73":1,"81":1,"85":1,"86":1,"91":1}
def getSupportedCmdClasses () {[
0x20, // Basic
0x25, // Switch Binary
0x27, // Switch All
0x31, // Sensor Multilevel
0x43, // Thermostat setpoint
0x60, // Multi Instance
0x70, // Configuration
0x72, // Manufacturer Specific
0x73, // Powerlevel
0x81, // Clock
0x85, // Association
0x86, // Version
0x91 // Manufacturer Proprietary
]
}
// Main entry point for messages from the device
def parse(String description) {
log("TRACE", 2, "<<< Incoming: [$description]")
def result = null
def command = null
def cmd = null
def payloadStr = ""
byte[] payload = []
if (description.startsWith("Err")) {
log("WARN", "Error in Parse")
result = createEvent(descriptionText:description, isStateChange:true)
} else {
try {
def command1 = description.split('command:')[1]
command = command1.split(',')[0]
payloadStr = description.split('payload:')[1]
} catch (e) {
log("ERROR", "..... Exception in Parse() ${cmd} - description:${description} exception ${e}")
}
// log("DEBUG", "command: ${command} payloadStr: ${payloadStr}")
if (command.contains("9100")) {
payload = payloadStr.replace(" ","").decodeHex()
log("DEBUG", 0, ">>>>> unParsed cmd - description:$description ")
result = zwaveEventManufacturerProprietary(payload, payloadStr)
} else {
try {
// cmd = zwave.parse(description, [0x20: 1, 0x25:1, 0x27:1, 0x31:1, 0x43:1, 0x60:3, 0x70:2, 0x72:1, 0x81:1, 0x85:2, 0x86: 1, 0x73:1, 0x91:1])
cmd = zwave.parse(description, [0x20: 1, 0x25:1, 0x27:1, 0x31:1, 0x43:1, 0x60:1, 0x70:2, 0x72:1, 0x81:1, 0x85:2, 0x86: 1, 0x73:1, 0x91:1])
} catch (e) {
log("WARN", "..... Exception in zwave.parse() ${cmd} - description:${description} exceptioon ${e}")
}
if (cmd) {
log("DEBUG", 2, "----- ${cmd} - description:$description ")
result = zwaveEvent(cmd)
} else {
log("WARN", "----- Parse() parsed to NULL: description:$description")
return null
}
}
}
delayResponseLog(result)
}
private List setPoolSetpointInternal(Double degrees) {
// Z-Wave standard values for thermostatSetpointSet
// precision: 0=no decimal digits, 1=1 decimal digit, 2=2 decimal digits
// scale: 0=Celsius, 1=Farhenheit
// size: 1=8 bit, 2=16 bit, 4=32 bit
// setpointType: 1=Heating (pool), 7=Furnace (spa)
def cmds = []
def deviceScale = state.scale != null ? state.scale : 1
def deviceScaleString = deviceScale == 2 ? "C" : "F"
def locationScale = getTemperatureScale()
def p = (state.precision == null) ? 1 : state.precision
log("debug", "setPoolSetpointInternal degrees=${degrees} incoming state.scale=${state.scale} deviceScale=${deviceScale}")
def convertedDegrees
// if (locationScale == "C" && deviceScaleString == "F") {
// convertedDegrees = celsiusToFahrenheit(degrees)
// } else if (locationScale == "F" && deviceScaleString == "C") {
// convertedDegrees = fahrenheitToCelsius(degrees)
// } else {
convertedDegrees = degrees
// }
p = 0
state.poolSetpointTemp = degrees
// log("DEBUG", "state = ${state}")
// state.each {key, val ->
// log("DEBUG", "state key: $key, value: $val")
// }
// deviceScale = 0 // Cannot send scale = 1 to v3.4 PE653 or it will ignore the request
// deviceScale = deviceScale ? 0 : 1 // Invert deviceScale to be able to test v34.14 firmware
cmds << zwave.thermostatSetpointV1.thermostatSetpointSet(setpointType: 1, scale: deviceScale, precision: p, size: 1, scaledValue: convertedDegrees)
cmds << zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 1)
cmds
}
private List setSpaSetpointInternal(Double degrees) {
def cmds = []
def deviceScale = state.scale != null ? state.scale : 1
def deviceScaleString = deviceScale == 2 ? "C" : "F"
def locationScale = getTemperatureScale()
def p = (state.precision == null) ? 1 : state.precision
log("debug", "setSpaSetpointInternal degrees=${degrees} incoming state.scale=${state.scale} deviceScale=${deviceScale}")
def convertedDegrees
// if (locationScale == "C" && deviceScaleString == "F") {
// convertedDegrees = celsiusToFahrenheit(degrees)
// } else if (locationScale == "F" && deviceScaleString == "C") {
// convertedDegrees = fahrenheitToCelsius(degrees)
// } else {
convertedDegrees = degrees
// }
p = 0
state.spaSetpointTemp = degrees
// deviceScale = 0 // Cannot send scale = 1 to PE653 ver 3.4 or it will ignore the request
// deviceScale = deviceScale ? 0 : 1 // Invert deviceScale to be able to test v34.14 firmware
cmds << zwave.thermostatSetpointV1.thermostatSetpointSet(setpointType: 7, scale: deviceScale, precision: p, size: 1, scaledValue: convertedDegrees)
cmds << zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 7)
cmds
}
// Ask the controller for the water temperature
private List getWaterTemp() {
log("debug", "getWaterTemp()")
[zwave.sensorMultilevelV1.sensorMultilevelGet()]
}
//Reports
def zwaveEvent(hubitat.zwave.commands.versionv1.VersionReport cmd) {
state.VersionInfo = "Versions: Firmware v${cmd.applicationVersion}.${cmd.applicationSubVersion} DTH: ${VERSION} zWaveLibraryType: ${cmd.zWaveLibraryType} zWaveProtocol: v${cmd.zWaveProtocolVersion}.${cmd.zWaveProtocolSubVersion}"
createEvent(name: "VersionInfo", value: state.VersionInfo, displayed: true, descriptionText: state.VersionInfo)
}
def zwaveEvent(hubitat.zwave.commands.versionv1.VersionCommandClassReport cmd) {
if (cmd.commandClassVersion) {
def cls = String.format("%02X", cmd.requestedCommandClass)
state.ccVersions[cls] = cmd.commandClassVersion
createEvent(name: "ccVersions", value: util.toJson(state.ccVersions), displayed: false, descriptionText:"")
} else {
[]
}
}
def zwaveEvent(hubitat.zwave.commands.clockv1.ClockReport cmd) {
def time1 = ""
time1 = "${String.format("%02d",cmd.hour)}:${String.format("%02d",cmd.minute)}"
log("DEBUG", "ClockReport: from PE653=${time1}")
createEvent(name: "clock", value: "${time1}", displayed: false, descriptionText: "PE653 Clock: ${time1}")
}
def zwaveEvent(hubitat.zwave.commands.thermostatsetpointv1.ThermostatSetpointSupportedReport cmd) {
log("DEBUG", "thermostatSetpointSupportedReport !!!")
def cmds = []
cmds
}
def zwaveEventManufacturerProprietary(byte [] payload, payloadStr) {
log("DEBUG", "ManufacturerProprietary event, [1]:${String.format("%02X",payload[1])} [4]:${String.format("%02X",payload[4])} payload: ${payloadStr}")
def rslt = []
byte [] oldResp = [1,2,3,4]
def respType = 0
def diffCnt = 0
def oldP = ""
def newP = ""
def oldD = ""
def newD = ""
def head = ""
if (payload[1] == 0x40 && payload[4] == -124) {
respType = 84
oldResp = state.manProp1
if (oldResp == null) {oldResp = payload}
state.manProp1 = payload
rslt = process84Event(payload)
} else if (payload[1] == 0x40 && payload[4] == -121) {
respType = 87
oldResp = state.manProp2
if (oldResp == null) {oldResp = payload}
state.manProp2 = payload
rslt = process87Event(payload)
} else if (payload[1] == 0x41) {
respType = 41
oldResp = state.manProp3
if (oldResp == null) {oldResp = payload}
state.manProp3 = payload
// rslt = process41Event(payload)
} else {
log("WARN", "Unexpected ManufacturersProprietary event received !!")
}
// log("DEBUG", "respType:${respType} oldResp: ${oldResp}")
if (oldResp == null) {oldResp = (byte[])[0,1,2,3,4] as byte [];log.debug "==null forced to array"}
for (def i=0;i<payload.length;i++) {
oldP += " ${String.format("%02X",oldResp[i])}"
newP += " ${String.format("%02X",payload[i])}"
oldD += " ${String.format("%03d",oldResp[i])}"
newD += " ${String.format("%03d",payload[i])}"
if (oldResp[i] != payload[i] && (
(respType == 84 && (i != CLOCK_MINUTE_84 && i != CLOCK_HOUR_84)) ||
(respType == 87 && (i != CLOCK_MINUTE_87 && i != CLOCK_HOUR_87)) ||
(respType == 41 && (i != 99))
)) {
diffCnt++
head += " ${String.format("%02d",i)} "
} else {
head += "--- "
}
}
if (diffCnt) {
log("debug", 2, "respType:${respType} differences:${diffCnt}\n__ __ ${head}\nnew-: ${newP}\nold-- : ${oldP}")
}
rslt
}
def getCLOCK_MINUTE_84 () { 16 } // Clock Minute
def getCLOCK_HOUR_84 () { 15 } // Clock Hour
def getWATER_TEMP_84 () { 12 } // Water Temperature
def getAIR_TEMP_FREEZE_84 () { 13 } // Air Temperature for Freeze sensing
def getAIR_TEMP_SOLAR_84 () { 14 } // Air Temperature for Solar control
def getSWITCHES_84 () { 8 } // Bit mask of 5 switches. SW1 = 01X, SW5 = 10X
def getPOOL_SPA_MODE_84 () { 11 } // Pool/Spa mode. 01x Pool mode, 00x Spa mode
def getVSP_SPEED_84 () { 20 } // VSP Speed bit mask. 01x = VSP1, 08x = VSP4
// Received a ManufacturerProprietary message. Pull the important details and update the UI controls
def process84Event(byte [] payload) {
// log("DEBUG", "process84Event payload: ${payload}")
def rslt = []
def map = [:]
def str = ""
def val = 0
def ch = 0
Integer temp
def swMap = ['1':1, '2':2, '3':4, '4':8, '5':16]
for (sw in swMap) {
if (payload[SWITCHES_84] & sw.value) {
val = 0xFF
} else {
val = 0
}
rslt.addAll(createMultipleEvents(sw.key.toInteger(), val, (val == 0) ? "off": "on"))
}
// Set VSP indicators if enabled
if (VSP_ENABLED) {
for (vsp in ['1':1, '2':2, '3':4, '4':8]) {
if (payload[VSP_SPEED_84] & vsp.value) {
val = 0xFF
} else {
val = 0
}
ch = getVSP_EP(vsp.key.toInteger())
rslt.addAll(createMultipleEvents(ch, val, (val == 0) ? "off": "on"))
}
}
// Set Pool/Spa mode indicator
if (POOL_SPA_COMBO) {
val = ((payload[POOL_SPA_MODE_84] & 0x01) == 0) ? 0xFF : 0
rslt.addAll(createMultipleEvents(POOL_SPA_EP, val, (val == 0) ? "off": "on"))
}
// Update Water Temperature
temp = payload[WATER_TEMP_84] >= 0 ? payload[WATER_TEMP_84] : payload[WATER_TEMP_84] + 255
rslt << createEvent(name: "temperature", value: temp, unit: "F", displayed: true, isStateChange: true)
// Update Freeze Air Temperature
// payload[AIR_TEMP_FREEZE_84] = -127 // test for negative
temp = payload[AIR_TEMP_FREEZE_84] >= 0 ? payload[AIR_TEMP_FREEZE_84] : payload[AIR_TEMP_FREEZE_84] + 255
rslt << createEvent(name: "airTempFreeze", value: temp, unit: "F", displayed: true, isStateChange: true)
// Update Solar Air Temperature
// payload[AIR_TEMP_SOLAR_84] = -125 // Test for negative
temp = payload[AIR_TEMP_SOLAR_84] >= 0 ? payload[AIR_TEMP_SOLAR_84] : payload[AIR_TEMP_SOLAR_84] + 255
rslt << createEvent(name: "airTempSolar", value: temp, unit: "F", displayed: true, isStateChange: true)
// Update Clock
def time1 = "${String.format("%02d",payload[CLOCK_HOUR_84])}:${String.format("%02d",payload[CLOCK_MINUTE_84])}"
rslt << createEvent(name: "clock", value: "${time1}", displayed: false, descriptionText: "PE653 Clock: ${time1}")
rslt
}
def getHEATER_87 () { 15 } // Heater. 04x = on, 00x = off
def getCLOCK_MINUTE_87 () { 25 } // Clock Minute
def getCLOCK_HOUR_87 () { 24 } // Clock Hour
// Received a ManufacturerProprietary message. Pull the important details and update the UI controls
def process87Event(byte [] payload) {
// log("DEBUG", "process87Event payload: ${payload}")
def rslt = []
def val = ((payload[HEATER_87] & 0x04) == 0) ? "off" : "on"
rslt << createEvent(name: "heater", value: "$val", isStateChange: true, displayed: true, descriptionText: "Heater is ${val}")
rslt
}
// ManufacturerSpecificReport(manufacturerId: 5, manufacturerName: Intermatic, productId: 1619, productTypeId: 20549)
def zwaveEvent(hubitat.zwave.commands.manufacturerspecificv1.ManufacturerSpecificReport cmd) {
state.ManufacturerInfo = "ManufacturerInfo: manufacturerId: $cmd.manufacturerId, manufacturerName: $cmd.manufacturerName, productId: $cmd.productId, productTypeId: $cmd.productTypeId"
log("DEBUG", "ManufacturerSpecificReport: ${state.ManufacturerInfo}")
createEvent(name: "ManufacturerInfo", value: state.ManufacturerInfo, displayed: true, descriptionText: state.ManufacturerInfo)
}
def zwaveEvent(hubitat.zwave.commands.configurationv2.ConfigurationReport cmd) {
def map = [:]
def cmds = []
def myValue = ""
def externalValue = ""
def paramNum = cmd.parameterNumber
int ep = getEP_FROM_SCHED_PARM(paramNum)
int sch = paramNum - getSCHED_PARAM(ep,1) +1
// log("DEBUG", "paramNum=$paramNum getSCHED_PARAM($ep,1)=${getSCHED_PARAM(ep,1)} sch=${sch}")
map.value = cmd.configurationValue[0]
map.name = ""
map.displayed = true
switch (paramNum) {
case 1:
map.name = "operationMode"
cmds << createEvent(map)
break;
case 2:
map.name = "firemanTimeout"
cmds << createEvent(map)
break;
case 3:
map.name = "temperatureOffsets"
cmds << createEvent(map)
break;
case POOL_SPA_CONFIG:
map.name = "spamode1"
// log("DEBUG", "..... ConfigurationReport - got parameter=${paramNum}")
// cmds << createEvent(map)
break;
default:
// log("WARN", "..... ConfigurationReport - UNKNOWN parameter=${paramNum}")
break;
}
// If this configuration report corresponds to one of the schedules, record the current setting and create events
if (ep) {
def lst
def schLst
if (cmd.size == 4 && cmd.configurationValue[0] == 0xFF && cmd.configurationValue[1] == 0xFF && cmd.configurationValue[2] == 0xFF && cmd.configurationValue[3] == 0xFF) {
// log("DEBUG", "schedule $ep,$sch is null")
lst = null
} else {
lst = [ep, sch]
for (def i=0;i<=2;i+=2) {
int tim = cmd.configurationValue[i+1] * 256 + cmd.configurationValue[i]
lst << tim.intdiv(60)
lst << tim % 60
}
}
if (state.schedules == null) {state.schedules = []}
schLst = state.schedules[ep]
if (schLst == null) {schLst =[ep];state.schedules[ep]=schLst }
schLst[sch] = lst
log("DEBUG", "ConfigurationReport for Schedule: ep:${ep} sch=${sch} lst=${lst} schLst=${schLst}")
// log("DEBUG", "schLst=$schLst state.schedules=${state.schedules}")
// log("DEBUG", "state = ${state}")
cmds << createEvent(name: "schedules", value: util.toJson(state.schedules), isStateChange: true, displayed: true, descriptionText: "Schedule fpr ep=${ep} sch=${sch} updated to: ${lst}")
cmds << createEvent(name: "lastScheduleChg", value: ep, isStateChange: true, displayed: true, descriptionText: "Schedule ${ep},${sch} changed")
}
cmds
}
def zwaveEvent(hubitat.zwave.commands.sensormultilevelv1.SensorMultilevelReport cmd) {
def map = [:]
map.value = cmd.scaledSensorValue.toString()
map.unit = cmd.scale == 1 ? "F" : "C"
map.displayed = true
map.isStateChange = true
map.descriptionText = "Water Temp is ${map.value}°${map.unit}"
map.name = "temperature"
createEvent(map)
}
def zwaveEvent(hubitat.zwave.commands.thermostatsetpointv1.ThermostatSetpointReport cmd) {
def map = [:]
def setpoint
double requestedSetpoint = 0
map.value = cmd.scaledValue.toString()
// map.unit = cmd.scale == 1 ? "F" : "C"
map.unit = "F"
map.displayed = true
switch (cmd.setpointType) {
case 1:
map.name = "poolSetpoint"
setpoint = state.poolSetpointTemp
break;
case 7:
map.name = "spaSetpoint"
setpoint = state.spaSetpointTemp
break;
default:
return [:]
}
log("DEBUG", "ThermostatSetpointReport: incoming state.scale=${state.scale} requested state.${map.name}Temp=${setpoint} reported Setpoint=${cmd.scaledValue}")
if (setpoint != null) {requestedSetpoint = setpoint}
// So we can respond with same format
state.size = cmd.size
state.precision = cmd.precision
// state.scale = cmd.scale
// PE653 ver3.4 has two varients: v34 that requires Celsius scale (0) and a newer (correct) V34.14 that requires Fahrenheit scale (1).
// Unfortunately the version report does not distinguish between the two versions.
// Regardless of scale, PE653 always expects the actual temperature value to be in Fahrenheit.
// If a setpoint Set request is ignored, then flip to the opposite scale in an attempt to adapt to the one this firmware expects.
if (cmd.scaledValue != requestedSetpoint) {
def oldScale = state.scale
state.scale = state.scale == 1 ? 0 : 1
log("WARN", "ThermostatSetpointReport: Requested Setpoint was ignored. Switching from old scale=${oldScale} to new state.scale=${state.scale}")
}
log("DEBUG", "ThermostatSetpointReport: outgoing state.scale=${state.scale}")
createEvent(map)
}
def zwaveEvent(hubitat.zwave.commands.basicv1.BasicReport cmd) {
if (cmd.value == 0) {
createEvent(name: "switch", value: "off")
} else if (cmd.value == 255) {
createEvent(name: "switch", value: "on")
}
}
def zwaveEvent(hubitat.zwave.commands.basicv1.BasicSet cmd) {
def result = []
if (cmd.value == 0) {
result = createEvent(name: "switch", value: "off")
} else if (cmd.value == 255) {
result = createEvent(name: "switch", value: "on")
}
result
}
def zwaveEvent(hubitat.zwave.commands.basicv1.BasicGet cmd) {
def cmds = []
int val = device.currentValue("switch1").equals("on") ? 0xFF : 0
cmds << zwave.basicV1.basicReport(value: val)
delayBetweenLog(cmds)
}
/*
def zwaveEvent(hubitat.zwave.commands.multichannelv3.MultiInstanceReport cmd) {
log("DEBUG", "MultiInstanceReport cmd=${cmd}")
}
def zwaveEvent(hubitat.zwave.commands.multichannelv3.MultiChannelEndPointReport cmd) {
log("DEBUG", "MultiChannelEndPointReport cmd=${cmd}")
}
*/
def zwaveEvent(hubitat.zwave.commands.associationv2.AssociationReport cmd) {
[]
}
def zwaveEvent(hubitat.zwave.commands.associationv2.AssociationGroupingsReport cmd) {
// state.groups = cmd.supportedGroupings
[]
}
// Multi-channel event from the device. Version 1 of Command Class
def zwaveEvent(hubitat.zwave.commands.multiinstancev1.MultiInstanceCmdEncap cmd) {
log("DEBUG", "multiinstancev1.MultiInstanceCmdEncap cmd=${cmd}")
zwaveEventMultiCmdEncap(cmd)
}
/*
// Multi-channel event from the device. Version 3 of Command Class
def zwaveEvent(hubitat.zwave.commands.multichannelv3.MultiInstanceCmdEncap cmd) {
log("WARN", "multichannelv3.MultiInstanceCmdEncap cmd=${cmd}")
zwaveEventMultiCmdEncap(cmd)
}
*/
// Multi-channel event from the device, common method.
def zwaveEventMultiCmdEncap(cmd) {
log("DEBUG", "zwaveEventCmdEncap cmd=${cmd}")
def rslt = []
def String myStr = (cmd.parameter[0] == 0) ? "off": "on"
def sw = 0
def encapsulatedCommand = cmd.encapsulatedCommand([0x32: 3, 0x25: 1, 0x20: 1])
if (encapsulatedCommand) {
switch(cmd.instance) {
case 1:
case 2:
case 3:
case 4:
case 5:
sw = cmd.instance
break;
case POOL_SPA_CHAN:
sw = POOL_SPA_EP
break;
case getVSP_CHAN_NO(1):
case getVSP_CHAN_NO(2):
case getVSP_CHAN_NO(3):
case getVSP_CHAN_NO(4):
sw = (cmd.instance - getVSP_CHAN_NO(1)) + 7
break;
default:
log("WARN", "..... MultiInstanceCmdEncap - UNKNOWN INSTANCE=${cmd.instance}")
return []
}
rslt.addAll(createMultipleEvents(sw, cmd.parameter[0], myStr))
} else {
log("WARN", "MultiInstanceCmdEncap: Could not de-encapsulate!!!")
}
rslt
}
// Used to update our own switches state as well as the child devices
// Two Events: One event is immediately sent to the child device and another is returned to our own UI control
private List createMultipleEvents (Integer endpoint, Integer externalParm, String myParm) {
def rslt = []
def swName = getSWITCH_NAME(endpoint)
log("DEBUG", 2, "..... createMultipleEvents( endpoint:$endpoint, name:$swName, externalParm:$externalParm, myParm:$myParm)")
def children = getChildDevices()
def dni = "${device.deviceNetworkId}-ep${endpoint}"
def devObj = getChildDevices()?.find { it.deviceNetworkId == dni }
// log("DEBUG", "CME: devObj = ${devObj}")
if (devObj) {
if (devObj.currentValue("switch") == "$myParm") {
log("DEBUG", 2, "<<<<< Child Event unnecessary. name:$dni:$swName evt: \"${myParm}\" ==> dev (${devObj.currentValue("switch")})")
} else {
log("DEBUG", 2, "<<<<< Child Event NECESSARY: name:$dni:$swName evt: \"${myParm}\" ==> dev (${devObj.currentValue("switch")})")
devObj.sendEvent(name: "switch", value: "$myParm", isStateChange: true, displayed: true, descriptionText: "$myParm event sent from parent device")
rslt << "Note:Event: \"${myParm}\" to child: ${dni}:${devObj}"
}
} else {
log("WARN", "CME: CAN'T FIND CHILD DEVICE: ${dni}:$swName")
}
def sw = getSWITCH_NAME(endpoint)
rslt << createEvent(name: "$sw", value: "$myParm", isStateChange: true, displayed: true, descriptionText: "($sw set to $myParm)")
rslt
}
def zwaveEvent(hubitat.zwave.Command cmd) {
log("WARN", "Captured unexpected zwave command $cmd")
createEvent(descriptionText: "Unexpected command $device.displayName: $cmd", isStateChange: true)
}
//Commands
// Called occasionally although not consistently
def List poll() {
log("DEBUG", "+++++ poll()")
delayBetweenLog(addRefreshCmds([]))
}
private initUILabels() {
def val = "off"
sendEvent(name: "M1Name", value: (M1Label ? "${M1Label}" : ""), isStateChange: true, displayed: false, descriptionText: "init M1 Label to ${M1Label}")
sendEvent(name: "M2Name", value: (M2Label ? "${M2Label}" : ""), isStateChange: true, displayed: false, descriptionText: "init M2 Label to ${M2Label}")
sendEvent(name: "M3Name", value: (M3Label ? "${M3Label}" : ""), isStateChange: true, displayed: false, descriptionText: "init M3 Label to ${M3Label}")
sendEvent(name: "M4Name", value: (M4Label ? "${M4Label}" : ""), isStateChange: true, displayed: false, descriptionText: "init M4 Label to ${M4Label}")
val = VSP_ENABLED ? "off" : "disabled"
sendEvent(name: "swVSP1", value: val, displayed: false, descriptionText:"")
sendEvent(name: "swVSP2", value: val, displayed: false, descriptionText:"")
sendEvent(name: "swVSP3", value: val, displayed: false, descriptionText:"")
sendEvent(name: "swVSP4", value: val, displayed: false, descriptionText:"")
val = POOL_SPA_COMBO ? "off" : "disabled"
sendEvent(name: "poolSpaMode", value: val, displayed: false, descriptionText:"")
}
// Called only by an explicit push of the "Refresh" button
def List refresh() {
log("DEBUG", "+++++ refresh() DTH:${VERSION} state.Versioninfo=${state.VersionInfo}")
def cmds = []
// cmds << zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 1)
// cmds << zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 7)
cmds << zwave.versionV1.versionGet()
cmds << zwave.manufacturerSpecificV1.manufacturerSpecificGet()
// cmds << zwave.associationV2.associationGroupingsGet()
// cmds << zwave.multiInstanceV1.multiInstanceGet(commandClass:37)
cmds << zwave.configurationV2.configurationGet(parameterNumber: 1)
cmds << zwave.configurationV2.configurationGet(parameterNumber: 2)
cmds << zwave.configurationV2.configurationGet(parameterNumber: 3)
cmds << zwave.configurationV2.configurationGet(parameterNumber: POOL_SPA_CONFIG)
if (debugLevel > "5") {
getSupportedCmdClasses().each {cc ->
cmds << zwave.versionV1.versionCommandClassGet(requestedCommandClass: cc)
}
}
delayBetweenLog(addRefreshCmds(cmds))
}
def List updated() {
log("DEBUG", "+++++ updated() DTH:${VERSION} state.Versioninfo=${state.VersionInfo} state.ManufacturerInfo=${state.ManufacturerInfo}")
def devStr = ""
initUILabels()
double degrees = 0
createChildDevices()
// Clean up old junk state variables
state.remove("groups")
state.remove("cnfData")
state.remove("cnfData2")
state.remove("cnfAttemptsLeft")
state.remove("cnfGetGoal")
state.remove("cnfParallelGets")
state.remove("cnfSendParmOne")
state.remove("endpoints")
state.remove("enabledEndpoints")
state.remove("endpointInfo")
state.remove("nextParm")
state.remove("manufacturer")
state.remove("pumpSpeed")
state.remove("oldLabel")
state.remove("children")
// Initialize persistent state variables
state.lightCircuitsList = getLightCircuits()
state.spaSetpointTemp = degrees
state.poolSetpointTemp = degrees
if (state.scale == null) {state.scale = 1}
if (state.precision == null) {state.precision = 1}
// state.each {key, val ->
// log("DEBUG", "state key: $key, value: $val")
// }
state.schedules = []
def cmds = internalConfigure()
// cmds.addAll(setSchedule(9,1,12,0,12,02) )
// cmds.addAll(getSchedules(7) )
cmds = delayBetweenLog(addRefreshCmds(cmds))
// log("TRACE", "cmds=$cmds")
cmds.each {key ->
devStr = devStr.concat("\n<<<<< updated: cmd=$key")
// sendHubCommand(key)
}
sendHubCommand(cmds,0)
// log("DEBUG", devStr)
return []
}
def List configure() {
log("DEBUG", "+++++ configure() DTH:${VERSION} state.Versioninfo=${state.VersionInfo}")
initUILabels()
delayBetweenLog(addRefreshCmds(internalConfigure()))
}
private List internalConfigure() {
def opMode2 = operationMode2.toInteger() & 0x03
def int tempWater = tempOffsetwater.toInteger()
def int tempAir = tempOffsetair.toInteger()
def cmds = []
if (tempWater < 0) tempWater = 256 + tempWater
if (tempAir < 0) tempAir = 256 + tempAir
cmds << zwave.configurationV2.configurationSet(parameterNumber: 1, size: 2, configurationValue: [operationMode1.toInteger(), opMode2.toInteger()])
cmds << zwave.configurationV2.configurationSet(parameterNumber: 3, size: 4, configurationValue: [tempWater, tempAir, 0, 0])
cmds << zwave.configurationV2.configurationSet(parameterNumber: 2, size: 1, configurationValue: [fireman.toInteger()])
cmds << zwave.configurationV2.configurationSet(parameterNumber: POOL_SPA_CONFIG, size: 1, configurationValue: [poolSpa1.toInteger()])
cmds << zwave.configurationV2.configurationGet(parameterNumber: 1)
cmds << zwave.configurationV2.configurationGet(parameterNumber: 2)
cmds << zwave.configurationV2.configurationGet(parameterNumber: 3)
cmds << zwave.configurationV2.configurationGet(parameterNumber: POOL_SPA_CONFIG)
// cmds << zwave.associationV2.associationGroupingsGet()
// cmds << zwave.associationV2.associationSet(groupingIdentifier:1, nodeId:zwaveHubNodeId)
// cmds << zwave.associationV2.associationGet(groupingIdentifier:1)
cmds
}
private void createChildDevices() {
def oldChildren = getChildDevices()
log("DEBUG", "Existing children: ${oldChildren}")
for (childNo in 1..5) {
addOrReuseChildDevice(childNo, "${device.displayName} - Switch ${childNo}", oldChildren)
}
if ( POOL_SPA_COMBO ) {
def childNo = 6
addOrReuseChildDevice(childNo, "${device.displayName} - Spa Mode", oldChildren)
}
if ( VSP_ENABLED ) {
for (childNo in 7..10) {
addOrReuseChildDevice(childNo, "${device.displayName} - Speed ${childNo-6}", oldChildren)
}
}
removeChildDevices(oldChildren)
}
private Object addOrReuseChildDevice(childNo, name, List oldChildren){
def Object devObj = null
def dni = "${device.deviceNetworkId}-ep${childNo}"
// log("TRACE", "addOrReuseChildDevice dni=${dni} oldChildren.size=${oldChildren.size} oldChildren: ${oldChildren}")
devObj = oldChildren.find {it.deviceNetworkId == dni}
if ( devObj ) {
// log("TRACE", "found existing device=${devObj.name} dni=${devObj.deviceNetworkId}")
oldChildren.remove(devObj)
// log("TRACE", "after remove dni=${dni} oldChildren.size=${oldChildren.size}")
} else {
try {
log("DEBUG", "addChildDevice(namespace=\"erocm123\",DTH Name=\"Switch Child Device\", dni=\"${dni}\", hubId=null,"+
"properties=[completedSetup: true, label: \"${name}\","+
"isComponent: false, componentName: \"ep${childNo}\", componentLabel: \"Switch ${childNo}\"]")
// SmartThings
// addChildDevice("erocm123", "Switch Child Device", dni, null,
// [completedSetup: true, label: name,
// isComponent: false, componentName: "ep${childNo}", componentLabel: "Switch ${childNo}"])
//Hubitat
addChildDevice("erocm123", "Switch Child Device", dni,
[isComponent: false, name: "ep${childNo}", label: "Switch ${childNo}"])
} catch (e) {
log("DEBUG", "addChildDevice failed: ${e}")
}
}
}
private removeChildDevices(List oldChildren){
log("DEBUG", "RemoveChildDevices(before) count=${oldChildren.size} children: ${oldChildren}")
try {
oldChildren.each {child ->
log("DEBUG", "remove child name=${child.name} displayName=${child.displayName} label=${child.label} dni=${child.deviceNetworkId} id=${child.id}")
deleteChildDevice(child.deviceNetworkId)
}
} catch (e) {
log("WARN", "Error deleting ${child}, either it didn't exist or probably locked into a SmartApps: ${e}")
}
}
// Request a report back from with the Clock time from the PE653
private List getClock() {
log("DEBUG", "+++++ getClock")
def cmds =[zwave.clockV1.clockGet()]
cmds
}
// Set the PE653 clock from the mobile client clock
def List setClock() {
def cmds = []
log("DEBUG", "+++++ setClock()")
def nowCal = Calendar.getInstance(location.timeZone)
def time2 = "${String.format("%02d",nowCal.get(Calendar.HOUR_OF_DAY))}:${String.format("%02d",nowCal.get(Calendar.MINUTE))}"
// log("DEBUG", "Time:${time2}")
cmds << zwave.clockV1.clockSet(hour: "${nowCal.get(Calendar.HOUR_OF_DAY)}".toInteger(), minute: "${nowCal.get(Calendar.MINUTE)}".toInteger())
// cmds << createEvent(name: "clock", value: "${time2}", displayed: false, descriptionText: "PE653 Clock: ${time2}")
delayBetweenLog(addRefreshCmds(cmds))
}
// Query the four VSP scheduled to determine which speed is enabled. Not currently used
private List getVSPSpeed() {
def cmds = []
log("DEBUG", "+++++ getVSPSpeed()")
if ( VSP_ENABLED ) {
for (int sp=1;sp<=4;sp++) {
cmds.addAll(getChanState(getVSP_CHAN_NO(sp)))
}
}
cmds
}
// Select a VSP speed and request a report to confirm. Not Currently used
private List setVSPSpeedAndGet(Integer speed) {
log("DEBUG", "+++++ setVSPSpeedAndGet() speed=${speed}")
def cmds = []
cmds.addAll(setVSPSpeedInternal(speed))
cmds.addAll(getVSPSpeed())
cmds
}
// Select a VSP speed by forcing the appropriate schedule to always on. speed is from 1-4
// A speed of zero will disable all 4 speeds (off).
// Called based on commands from the Multi-channel SmartApp
private List setVSPSpeedInternal(Integer speed) {
log("DEBUG", "+++++ setVSPSpeedInternal() speed=${speed}")
def cmds = []
if (speed) {
cmds.addAll(setChanState(getVSP_CHAN_NO(speed),0xFF))
} else {
// for (int sp=1;sp<=4;sp++) {
// cmds.addAll(setChanState(getVSP_CHAN_NO(sp), 0))
// }
// Turning off any speed turns off VSP, whether it is the current speed or not
cmds.addAll(setChanState(getVSP_CHAN_NO(1), 0))
}
cmds
}
// Send a configuration request
private List getConfiguration(Integer parmNo) {
log("DEBUG", "+++++ getConfiguration() parmNo=${parmNo}")
def cmds = []
cmds << zwave.configurationV2.configurationGet(parameterNumber: parmNo)
cmds
}
// Send a configuration command with a variable number of bytes
private List setConfiguration(Integer parmNo, Integer siz, Integer byte0, Integer byte1, Integer byte2, Integer byte3) {
log("DEBUG", "+++++ setConfiguration() parmNo=${parmNo} size=${siz} byte0=${byte0} byte1=${byte1} byte2=${byte2} byte3=${byte3}")
def cmds = []
def ints = [byte0,byte1,byte2,byte3]
def parmList = []
ints.eachWithIndex{ rpm, inx ->
if (inx < siz) {
parmList << rpm
}
}
// log("DEBUG", " siz=$siz parmList=$parmList")
cmds << zwave.configurationV2.configurationSet(configurationValue: parmList, size: siz, parameterNumber: parmNo)
cmds
}
// Set one schedule based on the schedule number and its start and end time
List setSchedule(Integer endpoint, Integer schedNo, Integer startHour, Integer startMinute, Integer endHour, Integer endMinute) {
def cmds = []
def cnfNo = getSCHED_PARAM(endpoint, schedNo)
log("DEBUG", "+++++ setSchedule() endpoint=${endpoint} schedNo=${schedNo} cnfNo=${cnfNo} start time=${startHour}:${startMinute} end time=${endHour}:${endMinute}")
if (cnfNo) {
int startTim = startHour * 60 + startMinute
int endTim = endHour * 60 + endMinute
cmds.addAll(setConfiguration(cnfNo, 4, (startTim % 256), startTim.intdiv(256), (endTim % 256), endTim.intdiv(256)))
}
delayBetweenLog(cmds)
}
// Reset one schedule based on the schedule number
List resetSchedule(Integer endpoint, Integer schedNo) {
def cmds = []
def cnfNo = getSCHED_PARAM(endpoint, schedNo)
log("DEBUG", "+++++ resetSchedule() endpoint=${endpoint} schedNo=${schedNo} cnfNo=${cnfNo}")
if (cnfNo) {
cmds.addAll(setConfiguration(getSCHED_PARAM(endpoint, schedNo), 4, 0xFF, 0xFF, 0xFF, 0xFF))
}
delayBetweenLog(cmds)
}
// Request all schedules for an endpoint
List getSchedules(Integer endpoint) {
def cmds = []
def cnfNo = getSCHED_PARAM(endpoint, 1)
log("DEBUG", "+++++ getSchedules() endpoint=${endpoint} cnfNo=${cnfNo}")
if (cnfNo) {
cmds.addAll(getConfiguration(getSCHED_PARAM(endpoint,1)))
cmds.addAll(getConfiguration(getSCHED_PARAM(endpoint,2)))
cmds.addAll(getConfiguration(getSCHED_PARAM(endpoint,3)))
}
delayBetweenLog(cmds)
}
// Set all four VSP RPM Speeds and the maximum RPM speed
List setVSPSpeeds(Integer rpm1, Integer rpm2, Integer rpm3, Integer rpm4, Integer rpmMax) {
log("DEBUG", "+++++ setVSPSpeeds() rpm1=${rpm1} rpm2=${rpm2} rpm3=${rpm3} rpm4=${rpm4} rpmMax=${rpmMax}")
def cmds = []
[rpm1,rpm2,rpm3,rpm4,rpmMax].eachWithIndex{ spd, inx ->
// log("DEBUG", "loop spd=$spd inx=$inx")
if (inx < 4) {
cmds.addAll(setConfiguration(getVSP_RPM_SCHED_PARAM(inx+1), 2, spd.intdiv(256), (spd % 256), 0, 0))
} else {
cmds.addAll(setConfiguration(getVSP_RPMMAX_SCHED_PARAM(), 2, spd.intdiv(256), (spd % 256), 0, 0))
}
}
delayBetweenLog(cmds)
}
// Not currently used
def List getPoolSpaMode() {
def cmds = []
if ( POOL_SPA_COMBO ) {
cmds = getChanState(POOL_SPA_CHAN)
}
cmds
}
private List setPoolSpaMode(Integer val) {
def cmds = []
def myValue = ""
cmds.addAll(setChanState(POOL_SPA_CHAN, val))
if (val == 0xFF) {
myValue = "on"
} else {
myValue = "off"
}
cmds
}
private List setSpaModeInternal() {
log("DEBUG", "+++++ setSpaModeInternal")
def cmds = []
cmds.addAll(setPoolSpaMode(0xFF))
cmds
}
private List setPoolModeInternal() {
log("DEBUG", "+++++ setPoolMode")
def cmds = []
cmds.addAll(setPoolSpaMode(0))
cmds
}
private def List togglePoolSpaModeInternal() {
log("DEBUG", "+++++ togglePoolSpaMode: poolSpaMode:${device.currentValue("poolSpaMode")}")
def cmds = []
if (device.currentValue("poolSpaMode").equals("on")) {
cmds.addAll(setPoolSpaMode(0))
} else {
cmds.addAll(setPoolSpaMode(0xFF))
}
cmds
}
// General purpose function to set a schedule to "Always off" or "Always on"
private List setSched(int paramNum, Integer val) {
log("DEBUG", "+++++ setSched(paramNum:${paramNum}, val:$val)")
def cmds = []
if (val == 0) {
cmds << zwave.configurationV2.configurationSet(configurationValue: [0xFF, 0xFF, 0xFF, 0xFF], size: 4, parameterNumber: paramNum)
} else {
cmds << zwave.configurationV2.configurationSet(configurationValue: [0x01, 0x00, 0x9F, 0x05], size: 4, parameterNumber: paramNum)
}
cmds
}
private List setLightColorInternal(int col) {
log("DEBUG", "+++++ setColor ${col}")
def cmds = []
sendEvent(name: "lightColor", value: "${col}", isStateChange: true, displayed: true, descriptionText: "Color set to ${col}")
getColorChgCmds()
}
private List getColorChgCmds() {
def cmds = []
int blinkCnt = device.currentValue("lightColor").toInteger()
if (blinkCnt > 14) blinkCnt = 14;
if (state.lightCircuitsList) {
cmds.addAll(blink(state.lightCircuitsList, blinkCnt))
}
cmds
}
// Return a list of the Light Circuits selected to have color set
def List getLightCircuits() {
def lightCircuits = []
if (C1ColorEnabled == "1") {lightCircuits << 1}
if (C2ColorEnabled == "1") {lightCircuits << 2}
if (C3ColorEnabled == "1") {lightCircuits << 3}
if (C4ColorEnabled == "1") {lightCircuits << 4}
if (C5ColorEnabled == "1") {lightCircuits << 5}
// log("TRACE", "lightCircuits=${lightCircuits} C3ColorEnabled=${C3ColorEnabled}")
lightCircuits
}
// Alternately turn a switch off then on a fixed number of times. Used to control the color of Pentair pool lights.
private def blink(List switches, int cnt) {
log("TRACE", "+++++ blink switches=${switches} cnt=${cnt}")
def cmds = []
def dly = MIN_DELAY
for (int i=1; i<=cnt; i++) {
switches.each { sw ->
if (cmds) {
cmds << "delay ${dly}"
}
cmds.addAll(setChanState(sw, 0))
dly = MIN_DELAY
}
dly = "${DELAY}"
switches.each { sw ->
cmds << "delay ${dly}"
cmds.addAll(setChanState(sw, 0xFF))
dly = MIN_DELAY
}
dly = "${DELAY}"
}
switches.each { sw ->
cmds << "delay ${dly}"
cmds.addAll(getChanState(sw))
}
//log("TRACE", "blink() cmds=${cmds}")
cmds
}
// Called by a button press for one of the "Mode" selections (eg: M1, M2, M3, M4)
def setMode(int mode) {
def cmds = []
List MxSw
String MxMode, MxTemp, MxVSP
// log("TRACE", "M1Sw1=${M1Sw1} M1Sw2=${M1Sw2} M1Sw3=${M1Sw3} M1Sw4=${M1Sw4} M1Sw5=${M1Sw5} M1Mode=${M1Mode} M1Temp=${M1Temp} M1VSP=${M1VSP}")
switch(mode) {
case 1:
MxSw = [M1Sw1, M1Sw2, M1Sw3, M1Sw4, M1Sw5]; MxMode = M1Mode; MxTemp = M1Temp; MxVSP = M1VSP; break
case 2:
MxSw = [M2Sw1, M2Sw2, M2Sw3, M2Sw4, M2Sw5]; MxMode = M2Mode; MxTemp = M2Temp; MxVSP = M2VSP; break
case 3:
MxSw = [M3Sw1, M3Sw2, M3Sw3, M3Sw4, M3Sw5]; MxMode = M3Mode; MxTemp = M3Temp; MxVSP = M3VSP; break
case 4:
MxSw = [M4Sw1, M4Sw2, M4Sw3, M4Sw4, M4Sw5]; MxMode = M4Mode; MxTemp = M4Temp; MxVSP = M4VSP; break
}
log("DEBUG", "+++++ setMode ${mode} MxSw=${MxSw} MxMode=${MxMode} MxTemp=${MxTemp} MxVSP=${MxVSP}")
if (MxMode == "1") {
cmds.addAll(setPoolModeInternal())
} else if (MxMode == "2") {
cmds.addAll(setPoolModeInternal())
cmds.addAll(setPoolSetpointInternal(MxTemp.toDouble()))
} else if (MxMode == "3") {
cmds.addAll(setSpaModeInternal())
} else if (MxMode == "4") {
cmds.addAll(setSpaModeInternal())
cmds.addAll(setSpaSetpointInternal(MxTemp.toDouble()))
}
MxSw.eachWithIndex {action, idx ->
// log("DEBUG", " action=${action} idx=${idx}")
if (action == "1") {
cmds.addAll(setChanState(idx.toInteger()+1,1))
} else if (action == "2") {
cmds.addAll(setChanState(idx.toInteger()+1,0))
}
}
if (VSP_ENABLED && MxVSP != "5") {
cmds.addAll(setVSPSpeedInternal(MxVSP.toInteger()))
}
// cmds.addAll(getRefreshCmds())
//log("TRACE", "setMode: cmds(before)=${cmds}")
cmds
}
// Called from anywhere that needs the UI controls updated following a Set
private List getRefreshCmds() {
log("DEBUG", "+++++ getRefreshCmds")
def cmds =[
new "910005400102870301",
new "910005400101830101",
// new hubitat.device.HubAction("91000541010100"),
]
cmds
}
private List getTestCmds() {
log("DEBUG", "+++++ getTestCmds")
def cmds =[
// new hubitat.device.HubAction("91000541010100"),
// zwave.manufacturerProprietaryV1.manufacturerProprietary(payload: "05400101830101")
]
// cmds.addAll(setChanState(getVSP_CHAN_NO(2), 0))
// cmds.addAll(getChanState(getVSP_CHAN_NO(1)))
// cmds.addAll(setVSPSpeeds(1500,2100,2800,3400,3425) )
// cmds.addAll(setVSPSpeeds(1400,2000,2750,3450,3450) )
// cmds.addAll(setSchedule(1,1,0,0,23,59) )
// cmds.addAll(resetSchedule(1,3) )
// cmds.addAll(setSchedule(2,1,07,00,19,00) )
// cmds.addAll(setSchedule(7,1,07,00,18,00) )
// cmds.addAll(resetSchedule(8,3) )
cmds.addAll(getSchedules(1) )
// state.each {key, val ->
// log("DEBUG", "state key: $key, value: $val")
// }
cmds
}
def on() {
log("DEBUG", "+++++ on()")
delayBetweenLog([
zwave.basicV1.basicSet(value: 0xFF),
zwave.basicV1.basicGet()
])
}
def off() {
log("DEBUG", "+++++ off()")
delayBetweenLog([
zwave.basicV1.basicSet(value: 0x00),
zwave.basicV1.basicGet()
])
}
//Request Switch State
private List getChanState(ch) {
log("DEBUG", "+++++ getChanState($ch)")
def cmds =[
zwave.multiInstanceV1.multiInstanceCmdEncap(instance:ch).encapsulate(zwave.switchBinaryV1.switchBinaryGet())
]
}
// Set switch instance on/off
private List setChanState(ch, on) {
log("DEBUG", 2, "+++++ setChanState($ch, $on)")
def cmds =[
zwave.multiInstanceV1.multiInstanceCmdEncap(instance: ch).encapsulate(zwave.switchBinaryV1.switchBinarySet(switchValue: (on ? 0xFF : 0))),
]
}
// Set switch state and request report back
private List setChanStateAndGet(ch, on) {
log("DEBUG", "+++++ setChanStateAndGet($ch, $on)")
def cmds = []
cmds = setChanState(ch, on)
cmds.addAll(getChanState(ch))
cmds
}
def List childOn(dni) {
log("DEBUG", "childOn called in parent: dni=${dni} channelNumber(dni)=${channelNumber(dni)}")
delayBetweenLog(addRefreshCmds(cmdFromChild(channelNumber(dni), 0xFF)))
}
def List childOff(dni) {
log("DEBUG", "childOff called in parent: dni=${dni} channelNumber(dni)=${channelNumber(dni)}")
delayBetweenLog(addRefreshCmds(cmdFromChild(channelNumber(dni), 0)))
}
def List childRefresh(dni) {
log("DEBUG", "refresh called in parent: dni=${dni} channelNumber(dni)=${channelNumber(dni)}")
delayBetweenLog(addRefreshCmds([]))
}
private channelNumber(String dni) {
log("DEBUG", "channelNumber: dni:$dni [-1] ${dni.split("-ep")[-1]} [0] ${dni.split("-ep")[0]} [1] ${dni.split("-ep")[1]}")
dni.split("-ep")[1] as Integer
}
// On or Off from a child device. Take action depending on which type of child device
private List cmdFromChild(int childNo, int val) {
def rslt = []
log("DEBUG", "+++++ cmdFromChild: childNo:$childNo val:$val")
switch (childNo) {
case 1:
case 2:
case 3:
case 4:
case 5:
rslt.addAll(setChanState(childNo, val))
break
case POOL_SPA_EP:
if (val) {
rslt.addAll(setSpaModeInternal())
} else {
rslt.addAll(setPoolModeInternal())
}
break
case getVSP_EP(1):
case getVSP_EP(2):
case getVSP_EP(3):
case getVSP_EP(4):
// Convert switch endpoint to a VSP speed
if (val) {
rslt.addAll(setVSPSpeedInternal( childNo - 6 ))
} else {
rslt.addAll(setVSPSpeedInternal( 0 ))
}
break
}
rslt
}
def List addRefreshCmds(List cmds) {
cmds.addAll(getRefreshCmds())
cmds
}
private List insertLogTrace() {
cal = Calendar.getInstance(location.timeZone)
def time = "${String.format("%02d", cal.get(Calendar.HOUR_OF_DAY))}" + ":" +
"${String.format("%02d", cal.get(Calendar.MINUTE))}" + ":" +
"${String.format("%02d", cal.get(Calendar.SECOND))}"
log.info("----------------------- ${time} -----------------------")
null
}
// Called by switch presses on the circuit buttons.
def List on1() { delayBetweenLog(addRefreshCmds(setChanState(1, 0xFF))) }
def List on2() { delayBetweenLog(addRefreshCmds(setChanState(2, 0xFF))) }
def List on3() { delayBetweenLog(addRefreshCmds(setChanState(3, 0xFF))) }
def List on4() { delayBetweenLog(addRefreshCmds(setChanState(4, 0xFF))) }
def List on5() { delayBetweenLog(addRefreshCmds(setChanState(5, 0xFF))) }
def List off1() { delayBetweenLog(addRefreshCmds(setChanState(1, 0))) }
def List off2() { delayBetweenLog(addRefreshCmds(setChanState(2, 0))) }
def List off3() { delayBetweenLog(addRefreshCmds(setChanState(3, 0))) }
def List off4() { delayBetweenLog(addRefreshCmds(setChanState(4, 0))) }
def List off5() { delayBetweenLog(addRefreshCmds(setChanState(5, 0))) }
// May be called by CoRE
def List setVSPSpeed(sp) {delayBetweenLog(addRefreshCmds(setVSPSpeedInternal(sp))) }
// Called by switch presses on the VSP buttons.
def List setVSPSpeed0() {delayBetweenLog(addRefreshCmds(setVSPSpeedInternal(0))) }
def List setVSPSpeed1() {delayBetweenLog(addRefreshCmds(setVSPSpeedInternal(1))) }
def List setVSPSpeed2() {delayBetweenLog(addRefreshCmds(setVSPSpeedInternal(2))) }
def List setVSPSpeed3() {delayBetweenLog(addRefreshCmds(setVSPSpeedInternal(3))) }
def List setVSPSpeed4() {delayBetweenLog(addRefreshCmds(setVSPSpeedInternal(4))) }
def List setMode1() {delayBetweenLog(addRefreshCmds(setMode(1))) }
def List setMode2() {delayBetweenLog(addRefreshCmds(setMode(2))) }
def List setMode3() {delayBetweenLog(addRefreshCmds(setMode(3))) }
def List setMode4() {delayBetweenLog(addRefreshCmds(setMode(4))) }
def List setSpaMode() {delayBetweenLog(addRefreshCmds(setSpaModeInternal())) }
def List setPoolMode() {delayBetweenLog(addRefreshCmds(setPoolModeInternal())) }
def List togglePoolSpaMode() {delayBetweenLog(addRefreshCmds(togglePoolSpaModeInternal())) }
def List quickSetSpa(degrees) {delayBetweenLog(addRefreshCmds(setSpaSetpointInternal("${degrees}".toDouble())))}
def List quickSetPool(degrees) {delayBetweenLog(addRefreshCmds(setPoolSetpointInternal("${degrees}".toDouble())))}
def List quickGetWaterTemp() {delayBetweenLog(addRefreshCmds(getWaterTemp())) }
def List quickGetTestCmds() {delayBetweenLog(addRefreshCmds(getTestCmds())) }
def List setLightColor(int col){delayBetweenLog(addRefreshCmds(setLightColorInternal(col))) }
def List setColor() {addRefreshCmds(delayBetweenLog(cmds)) }
// Called from Parse for responses from the device
def delayResponseLog(parm, dly=DELAY, responseFlg=true) {
delayBetweenLog(parm, dly, responseFlg)
}
// Called from all commands
def delayBetweenLog(parm, dly=DELAY, responseFlg=false) {
log("DEBUG", "+++++ delayBetweenLog parm[${parm.size}] dly=$dly responseFlg=${responseFlg}")
def lst = parm
def cmds =[]
def evts =[]
def devStr = ""
def evtStr = ""
def fmt = ""
if (!(parm in List)) {
lst = [parm]
}
lst.eachWithIndex {l, index ->
if (l instanceof List) {
log("WARN", " - UNEXPECTED instanceOf List: l -> ${l}")
} else if (l in List) {
log("WARN", " - UNEXPECTED in LIST: l -> ${l}")
} else {
log("TRACE", " - l -> ${l}")
}
if (l instanceof hubitat.device.HubAction) {
log("TRACE", " - ${index}: instanceof hubitat.device.HubAction")
if (cmds) {
def c = cmds.last() //check if there is already a delay prior to this
if (!(c instanceof String || c instanceof GString) || c.take(6) != "delay ") {
cmds << "delay $dly"
devStr = devStr.concat(", delay $dly")
}
}
cmds << l
devStr = devStr.concat("\n\t\t\t<<<<< HubAction: $l")
} else if (l instanceof String || l instanceof GString) {
log("TRACE", " - ${index}: String: $l")
if (l.take(5) == "Note:") {
evtStr = evtStr.concat("\n<<<<< ${l.drop(5)}")
} else {
cmds << l
devStr = devStr.concat(", ${l}")
}
} else if (l instanceof List) {
log("TRACE", " - ${index}: LIST: $l, adding commands")
cmds << l
} else if (l instanceof Map) {
log("TRACE", " - ${index}: Map: $l")
// example: createEvent(name: "$sw", value: "$myParm", isStateChange: true, displayed: true, descriptionText: "($sw set to $myParm)")
if ("${device.currentValue(l.name)}".equals("${l.value}")) {
log("DEBUG", 2, "<<<<< Event unnecessary. name:${l.name} evt: \"${l.value}\" ==> dev:(${device.currentValue(l.name)})")
} else {
log("DEBUG", "<<<<< Event NECESSARY. name:${l.name} evt: \"${l.value}\" ==> dev:(${device.currentValue(l.name)})")
evts << l
evtStr = evtStr.concat("\n<<<<< Event: $l")
}
} else {
log("TRACE", " - ${index}: else: HubAction: $l, format()=$fmt")
if (responseFlg) {
fmt = response(l)
} else {
fmt = l.format()
}
if (cmds) {
def c = cmds.last() //check if there is already a delay prior to this
if (!(c instanceof String || c instanceof GString) || c.take(6) != "delay ") {
cmds << "delay $dly"
devStr = devStr.concat(", delay $dly")
}
}
devStr = devStr.concat("\n\t\t\t Dev cmd: $l --> $fmt")
cmds << fmt
}
}
evts.addAll(cmds)
if (evts) {
log("DEBUG", "<<<<< rspFlg=${responseFlg} dly:$dly/${DELAY}${evtStr}${devStr}")
def eventsList = ""
evts.eachWithIndex { event, index ->
eventsList = eventsList.concat("\t\t\t\t${index}: ${event}\n")
}
log("DEBUG", 2, " - Events as sent: \n${eventsList}")
evts
} else {
log("DEBUG", 2, "<<<<< rspFlg=${responseFlg} dly:$dly/${DELAY} No Commands or Events")
null
}
}
private log(String type, Integer level = 1, String message) {
if (level == 0) { return }
if ( ! (debugLevel.any { element -> (element as int) >= (level as int)})) { return }
if ( ! ["ERROR", "WARN", "INFO", "DEBUG", "TRACE"].contains(type.toUpperCase())) { return }
def logType = type.toLowerCase()
log."$logType"(message)
}
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment