Synchronous multi-room sound casting of Bluetooth, Airplay, Line-In and Spotitfy

SSRPARI_Snapserver_Snapclient_RPi3.md

Synchronous multi-room sound casting of Bluetooth, Airplay, Line-In and Spotitfy

ALL CREDITS TO @badaix AND @BaReinhard

This will setup a raspberry-pi-3 as a snapcast-server and snapcast-client.
Possible music sources for the snapserver-component: Bluetooth, Airplay, Spotify, Line-In (more to come eg. RTP)
Music sinks (snapclients): usb soundcard connected to my stereo, another Pi

To Do:

• Energy saving by disabling onboard bluetooth, wifi and soundcard

SYSTEM ENVIRONMENT

• 2017-07-05-raspbian-jessie-lite.img
• rpi3, logilink-usb-bt-dongle, usb-soundcard

TIMEZONE, MEMORYSPLIT, EXPAND FILESYSTEM

sudo raspi-config

PREPARE, INSTALL AND CONFIGURE BLUTOOTH AND AIRPLAY FUNCTIONALITY (SSRPARI)

sudo apt update
sudo apt upgrade
sudo apt install git 
git clone https://github.com/BaReinhard/Super-Simple-Raspberry-Pi-Audio-Receiver-Install.git
cd Super-Simple-Raspberry-Pi-Audio-Receiver-Install/
sudo ./install.sh
#   Do you want to install SnapCast? (y/n): n
#   Do you want AirPlay Enabled? (y/n) : y
#   Do you want Bluetooth A2DP Enabled? (y/n) : y
#   Do you want to setup as an Access Point? (Necessary for AirPlay, in location without a Wireless Network) (y/n) : n
#   Do you want Kodi installed? (y/n) : n
#   Do you want to use infrared remotes? (y/n) : n
#   Do you want to use a Sound Card? (y/n) : y
#   Do you want to setup device as a UPnP Renderer? (y/n) : n
#   Do you want all the Devices to use the same name? (y/n) : y
#   Device name: MultiPi
#   Do you want to use an AirPlay password? (y/n) : n
#   (...)
#   9. USB Sound Card
#   (...)
#   Which Sound Card are you using? (0/1/2/3/4/5/6/7/8/9/10/11) :  9

DOWNLOAD, INSTALL SNAPCAST-SERVER AND CORRECT ITS DEPENDENCIES

wget https://github.com/badaix/snapcast/releases/download/v0.15.0/snapserver_0.15.0_armhf.deb
sudo dpkg -i snapserver_0.15.0_armhf.deb
sudo apt-get -f install

DOWNLOAD, INSTALL AND CONFIGURE SNAPCLIENT

wget https://github.com/badaix/snapcast/releases/download/v0.15.0/snapclient_0.15.0_armhf.deb
sudo dpkg -i snapclient_0.15.0_armhf.deb
#   LIST SOUNDCARDS
snapclient --list
#   CONFIGURE SNAPCLIENT
sudo nano /etc/default/snapclient
#   EDIT SNAPCLIENT_OPTS=""
#   -h <HOST> -s <SOUNDCARD> -d <DAEMONIZE>
#   SNAPCLIENT_OPTS="-h localhost -s 25 -d"
sudo systemctl restart snapclient.service

Add Bluetooth

# CREATE SNAPCAST-STREAM = NEW PULSEAUDIO-SINK
sudo nano /etc/default/snapserver	
#   EDIT
#   #SNAPSERVER_OPTS=""
#   SNAPSERVER_OPTS="-d -b 250 --sampleformat 48000:16:2 -s pipe:///tmp/snap_blue?name=Bluetooth&sampleformat=44100:16:2&mode=read"

#   CREATE SYSTEMWIDE PULSEAUDIO-PIPE-SINK
sudo nano /etc/pulse/system.pa
#   APPEND
#   load-module module-pipe-sink file=/tmp/snap_blue sink_name=bluetooth

# ASSIGN SINK TO [Bluetooth-Sources](https://github.com/BaReinhard/Super-Simple-Raspberry-Pi-Audio-Receiver-Install/issues/6#issuecomment-284573272)
sudo nano /usr/local/bin/bluez-udev
# EDIT
# #audio_sink=0
# audio_sink=1
sudo reboot

BUILD, CONFIGURE LIBRESPOT

sudo apt-get install build-essential portaudio19-dev git
curl https://sh.rustup.rs -sSf | sh
sudo reboot
git clone https://github.com/librespot-org/librespot.git
cd librespot/
cargo build --release
$PATH
sudo cp target/release/librespot /usr/bin
#   CREATE SNAPCAST-STREAM
sudo nano /etc/default/snapserver 
#   APPEND
#   SNAPSERVER_OPTS="  ... -s spotify:///librespot?name=Spotify&username=username&password=yourpassword&devicename=SpotiPI&bitrate=320  ...  "
sudo systemctl restart snapserver.service

BUILD, EDIT AND ENABLE CPIPED FOR LINE-IN AUDIO

git clone https://github.com/b-fitzpatrick/cpiped.git
cd cpiped/
make
sudo cp cpiped /usr/local/bin/
#   FIND CAPTURE DEVICE/LINE-IN 
arecord -L
nano scripts/init.d/cpiped
#   EDIT DAEMON-VARIABLES
#   DAEMON=/usr/local/bin/cpiped   # LOCATION OF THE BINARY
#   DAEMON_ARGS="-D -d sysdefault:CARD=Set /tmp/snap_jack"  # LOCATION OF THE PIPE
sudo cp cpiped /etc/init.d/
sudo chmod +x /etc/init.d/cpiped
sudo systemctl enable cpiped
sudo systemctl start cpiped
#   CREATE SNAPCAST-STREAM
sudo nano /etc/default/snapserver 
#   EDIT
#   #SNAPSERVER_OPTS=""
#   SNAPSERVER_OPTS="-d -b 250 --sampleformat 44100:16:2 -s pipe:///tmp/snap_jack?name=Jack&sampleformat=44100:16:2 -s pipe:///tmp/snap_blue?name=Bluetooth&mode=read&sampleformat=44100:16:2 -s spotify:///librespot?name=Spotify&username=username&password=yourpassword&devicename=SpotiPI&bitrate=320"

CONFIGURE AIRPLAY

#   CREATE SNAPCAST-STREAM
sudo nano /etc/default/snapserver 
#   APPEND
#   SNAPSERVER_OPTS="  ...  -s airplay:///shairport-sync?name=Airplay&devicename=MultiPi&port=5000  ...  "
sudo systemctl disable shaiport-sync 
sudo nano /etc/shairport-sync.conf
#   EDIT
#   //output_backend = "alsa"; 
#   output_backend = "stdout"; 

switched to snapcast_v15

I followed your tutorial, but I can not run cpiped and a blueototh audio source (via pulseaudio) at the same time. Can we have multiple simultaneous entries with snapcast?

Hello! Great write-up!

Can i ask for some assistance with cpiped?

All is working with this cli command (for about a day, then i need to restart):
/usr/local/bin/cpiped -D -d pulse /tmp/snapfifo

The init.d script doesnt work. Heres the error msg:
cpiped: pcm.c:1245: snd_pcm_drain: Assertion 'pcm' failed.

Another thing i tried is:

~$ /usr/local/bin/cpiped -D -d sysdefault:CARD=PCH /tmp/snapfifo
~$ ALSA lib pcm_dsnoop.c:618:(snd_pcm_dsnoop_open) unable to open slave

Before I buy an airplay speaker, I'm trying to figure out if it's possible to stream from snapserver (librespot), to both multiple snapclients and airplay clients, at the same time.

Does anyone know?

Before I buy an airplay speaker, I'm trying to figure out if it's possible to stream from snapserver (librespot), to both multiple snapclients and airplay clients, at the same time.

Does anyone know?

maybe try
https://music-assistant.io/