Created
April 22, 2011 06:43
-
-
Save trapd00r/936178 to your computer and use it in GitHub Desktop.
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
usb 1-3.4.7: USB disconnect, address 37 | |
usb 1-3.4.3: new high speed USB device using ehci_hcd and address 38 | |
scsi20 : usb-storage 1-3.4.3:1.0 | |
scsi 20:0:0:0: Direct-Access Seagate Desktop 0130 PQ: 0 ANSI: 4 | |
sd 20:0:0:0: Attached scsi generic sg14 type 0 | |
sd 20:0:0:0: [sdn] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) | |
sd 20:0:0:0: [sdn] Write Protect is off | |
sd 20:0:0:0: [sdn] Mode Sense: 2f 08 00 00 | |
sd 20:0:0:0: [sdn] Assuming drive cache: write through | |
sd 20:0:0:0: [sdn] Assuming drive cache: write through | |
sdn: sdn1 | |
sd 20:0:0:0: [sdn] Assuming drive cache: write through | |
sd 20:0:0:0: [sdn] Attached SCSI disk | |
EXT4-fs sdn1 mounted filesystem with writeback data mode. Opts: data=writeback | |
Clocksource tsc unstable (delta = 62501408 ns) | |
usb 1-3.3: reset high speed USB device using ehci_hcd and address 14 | |
usb 4-2: USB disconnect, address 2 | |
usb 4-1: new low speed USB device using ohci_hcd and address 3 | |
input: HP HP Wireless Keyboard Kit as /devices/pci0000:00/0000:00:13.2/usb4/4-1/4-1:1.0/input/input12 | |
generic-usb 0003:03F0:140C.000B: input,hidraw8: USB HID v1.11 Keyboard [HP HP Wireless Keyboard Kit] on usb-0000:00:13.2-1/input0 | |
input: HP HP Wireless Keyboard Kit as /devices/pci0000:00/0000:00:13.2/usb4/4-1/4-1:1.1/input/input13 | |
generic-usb 0003:03F0:140C.000C: input,hiddev0,hidraw9: USB HID v1.11 Mouse [HP HP Wireless Keyboard Kit] on usb-0000:00:13.2-1/input1 | |
usb 4-1: USB disconnect, address 3 | |
usb 4-1: new low speed USB device using ohci_hcd and address 4 | |
input: HP HP Wireless Keyboard Kit as /devices/pci0000:00/0000:00:13.2/usb4/4-1/4-1:1.0/input/input14 | |
generic-usb 0003:03F0:140C.000D: input,hidraw8: USB HID v1.11 Keyboard [HP HP Wireless Keyboard Kit] on usb-0000:00:13.2-1/input0 | |
input: HP HP Wireless Keyboard Kit as /devices/pci0000:00/0000:00:13.2/usb4/4-1/4-1:1.1/input/input15 | |
generic-usb 0003:03F0:140C.000E: input,hiddev0,hidraw9: USB HID v1.11 Mouse [HP HP Wireless Keyboard Kit] on usb-0000:00:13.2-1/input1 | |
usb 1-6: new high speed USB device using ehci_hcd and address 41 | |
hub 1-0:1.0: unable to enumerate USB device on port 6 | |
usb 1-6: new high speed USB device using ehci_hcd and address 42 | |
scsi21 : usb-storage 1-6:1.0 | |
scsi 21:0:0:0: Direct-Access SanDisk Sansa Clip+ 4GB v01. PQ: 0 ANSI: 0 | |
sd 21:0:0:0: Attached scsi generic sg15 type 0 | |
scsi 21:0:0:1: Direct-Access SanDisk Sansa Clip+ 4GB v01. PQ: 0 ANSI: 0 | |
sd 21:0:0:0: [sdo] 7683072 512-byte logical blocks: (3.93 GB/3.66 GiB) | |
sd 21:0:0:1: Attached scsi generic sg16 type 0 | |
sd 21:0:0:0: [sdo] Write Protect is off | |
sd 21:0:0:0: [sdo] Mode Sense: 04 00 00 00 | |
sd 21:0:0:0: [sdo] Assuming drive cache: write through | |
sd 21:0:0:1: [sdp] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB) | |
sd 21:0:0:1: [sdp] Write Protect is off | |
sd 21:0:0:1: [sdp] Mode Sense: 04 00 00 00 | |
sd 21:0:0:1: [sdp] Assuming drive cache: write through | |
sd 21:0:0:0: [sdo] Assuming drive cache: write through | |
sdo: | |
sd 21:0:0:1: [sdp] Assuming drive cache: write through | |
sdp: sdp1 | |
sd 21:0:0:0: [sdo] Assuming drive cache: write through | |
sd 21:0:0:0: [sdo] Attached SCSI removable disk | |
sd 21:0:0:1: [sdp] Assuming drive cache: write through | |
sd 21:0:0:1: [sdp] Attached SCSI removable disk | |
usb 1-6: USB disconnect, address 42 | |
hub 4-0:1.0: unable to enumerate USB device on port 2 | |
usb 1-6: new high speed USB device using ehci_hcd and address 44 | |
hub 1-0:1.0: unable to enumerate USB device on port 6 | |
usb 1-6: new high speed USB device using ehci_hcd and address 45 | |
scsi22 : usb-storage 1-6:1.0 | |
scsi 22:0:0:0: Direct-Access SanDisk Sansa Clip+ 4GB v01. PQ: 0 ANSI: 0 | |
sd 22:0:0:0: Attached scsi generic sg15 type 0 | |
scsi 22:0:0:1: Direct-Access SanDisk Sansa Clip+ 4GB v01. PQ: 0 ANSI: 0 | |
sd 22:0:0:1: Attached scsi generic sg16 type 0 | |
sd 22:0:0:0: [sdo] 7683072 512-byte logical blocks: (3.93 GB/3.66 GiB) | |
sd 22:0:0:0: [sdo] Write Protect is off | |
sd 22:0:0:0: [sdo] Mode Sense: 04 00 00 00 | |
sd 22:0:0:0: [sdo] Assuming drive cache: write through | |
sd 22:0:0:1: [sdp] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB) | |
sd 22:0:0:1: [sdp] Write Protect is off | |
sd 22:0:0:1: [sdp] Mode Sense: 04 00 00 00 | |
sd 22:0:0:1: [sdp] Assuming drive cache: write through | |
sd 22:0:0:0: [sdo] Assuming drive cache: write through | |
sdo: | |
sd 22:0:0:1: [sdp] Assuming drive cache: write through | |
sdp: sdp1 | |
sd 22:0:0:0: [sdo] Assuming drive cache: write through | |
sd 22:0:0:0: [sdo] Attached SCSI removable disk | |
sd 22:0:0:1: [sdp] Assuming drive cache: write through | |
sd 22:0:0:1: [sdp] Attached SCSI removable disk | |
sd 20:0:0:0: [sdn] Unhandled error code | |
sd 20:0:0:0: [sdn] Result: hostbyte=0x00 driverbyte=0x00 | |
sd 20:0:0:0: [sdn] CDB: cdb[0]=0x28: 28 00 19 80 01 3f 00 00 28 00 | |
end_request: I/O error, dev sdn, sector 427819327 | |
osscore: launch_output while not prepared. Engine=0 | |
usb 1-6: USB disconnect, address 45 | |
usb 1-6: new high speed USB device using ehci_hcd and address 47 | |
hub 1-0:1.0: unable to enumerate USB device on port 6 | |
usb 1-6: new high speed USB device using ehci_hcd and address 48 | |
scsi23 : usb-storage 1-6:1.0 | |
scsi 23:0:0:0: Direct-Access SanDisk Sansa Clip+ 4GB v01. PQ: 0 ANSI: 0 | |
sd 23:0:0:0: Attached scsi generic sg15 type 0 | |
scsi 23:0:0:1: Direct-Access SanDisk Sansa Clip+ 4GB v01. PQ: 0 ANSI: 0 | |
sd 23:0:0:0: [sdo] 7683072 512-byte logical blocks: (3.93 GB/3.66 GiB) | |
sd 23:0:0:1: Attached scsi generic sg16 type 0 | |
sd 23:0:0:0: [sdo] Write Protect is off | |
sd 23:0:0:0: [sdo] Mode Sense: 04 00 00 00 | |
sd 23:0:0:0: [sdo] Assuming drive cache: write through | |
sd 23:0:0:1: [sdp] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB) | |
sd 23:0:0:1: [sdp] Write Protect is off | |
sd 23:0:0:1: [sdp] Mode Sense: 04 00 00 00 | |
sd 23:0:0:1: [sdp] Assuming drive cache: write through | |
sd 23:0:0:0: [sdo] Assuming drive cache: write through | |
sdo: | |
sd 23:0:0:1: [sdp] Assuming drive cache: write through | |
sdp: sdp1 | |
sd 23:0:0:0: [sdo] Assuming drive cache: write through | |
sd 23:0:0:0: [sdo] Attached SCSI removable disk | |
sd 23:0:0:1: [sdp] Assuming drive cache: write through | |
sd 23:0:0:1: [sdp] Attached SCSI removable disk | |
usb 1-6: USB disconnect, address 48 | |
usb 1-4.6: reset high speed USB device using ehci_hcd and address 22 | |
usb 1-2.4: new high speed USB device using ehci_hcd and address 49 | |
scsi24 : usb-storage 1-2.4:1.0 | |
scsi 24:0:0:0: Direct-Access Nokia N900 031 PQ: 0 ANSI: 2 | |
sd 24:0:0:0: Attached scsi generic sg15 type 0 | |
scsi 24:0:0:1: Direct-Access Nokia N900 031 PQ: 0 ANSI: 2 | |
sd 24:0:0:1: Attached scsi generic sg16 type 0 | |
sd 24:0:0:0: [sdo] Attached SCSI removable disk | |
sd 24:0:0:1: [sdp] Attached SCSI removable disk | |
usb 1-6: new high speed USB device using ehci_hcd and address 50 | |
hub 1-0:1.0: unable to enumerate USB device on port 6 | |
usb 1-6: new high speed USB device using ehci_hcd and address 51 | |
scsi25 : usb-storage 1-6:1.0 | |
scsi 25:0:0:0: Direct-Access SanDisk Sansa Clip+ 4GB v01. PQ: 0 ANSI: 0 | |
sd 25:0:0:0: Attached scsi generic sg17 type 0 | |
scsi 25:0:0:1: Direct-Access SanDisk Sansa Clip+ 4GB v01. PQ: 0 ANSI: 0 | |
sd 25:0:0:1: Attached scsi generic sg18 type 0 | |
sd 25:0:0:0: [sdq] 7683072 512-byte logical blocks: (3.93 GB/3.66 GiB) | |
sd 25:0:0:0: [sdq] Write Protect is off | |
sd 25:0:0:0: [sdq] Mode Sense: 04 00 00 00 | |
sd 25:0:0:0: [sdq] Assuming drive cache: write through | |
sd 25:0:0:1: [sdr] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB) | |
sd 25:0:0:1: [sdr] Write Protect is off | |
sd 25:0:0:1: [sdr] Mode Sense: 04 00 00 00 | |
sd 25:0:0:1: [sdr] Assuming drive cache: write through | |
sd 25:0:0:0: [sdq] Assuming drive cache: write through | |
sdq: | |
sd 25:0:0:1: [sdr] Assuming drive cache: write through | |
sdr: sdr1 | |
sd 25:0:0:0: [sdq] Assuming drive cache: write through | |
sd 25:0:0:0: [sdq] Attached SCSI removable disk | |
sd 25:0:0:1: [sdr] Assuming drive cache: write through | |
sd 25:0:0:1: [sdr] Attached SCSI removable disk | |
usb 1-3.3: reset high speed USB device using ehci_hcd and address 14 | |
usb 1-2.4: USB disconnect, address 49 | |
usb 1-6: USB disconnect, address 51 | |
hub 4-0:1.0: unable to enumerate USB device on port 2 | |
usb 1-6: new high speed USB device using ehci_hcd and address 53 | |
hub 1-0:1.0: unable to enumerate USB device on port 6 | |
usb 1-6: new high speed USB device using ehci_hcd and address 54 | |
scsi26 : usb-storage 1-6:1.0 | |
scsi 26:0:0:0: Direct-Access SanDisk Sansa Clip+ 4GB v01. PQ: 0 ANSI: 0 | |
sd 26:0:0:0: Attached scsi generic sg15 type 0 | |
scsi 26:0:0:1: Direct-Access SanDisk Sansa Clip+ 4GB v01. PQ: 0 ANSI: 0 | |
sd 26:0:0:1: Attached scsi generic sg16 type 0 | |
sd 26:0:0:0: [sdo] 7683072 512-byte logical blocks: (3.93 GB/3.66 GiB) | |
sd 26:0:0:0: [sdo] Write Protect is off | |
sd 26:0:0:0: [sdo] Mode Sense: 04 00 00 00 | |
sd 26:0:0:0: [sdo] Assuming drive cache: write through | |
sd 26:0:0:1: [sdp] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB) | |
sd 26:0:0:1: [sdp] Write Protect is off | |
sd 26:0:0:1: [sdp] Mode Sense: 04 00 00 00 | |
sd 26:0:0:1: [sdp] Assuming drive cache: write through | |
sd 26:0:0:0: [sdo] Assuming drive cache: write through | |
sdo: | |
sd 26:0:0:1: [sdp] Assuming drive cache: write through | |
sdp: sdp1 | |
sd 26:0:0:0: [sdo] Assuming drive cache: write through | |
sd 26:0:0:0: [sdo] Attached SCSI removable disk | |
sd 26:0:0:1: [sdp] Assuming drive cache: write through | |
sd 26:0:0:1: [sdp] Attached SCSI removable disk | |
fuse init (API version 7.15) | |
usb 1-2.4: new high speed USB device using ehci_hcd and address 55 | |
scsi27 : usb-storage 1-2.4:1.0 | |
usb 1-2.4: USB disconnect, address 55 | |
usb 1-2.4: new high speed USB device using ehci_hcd and address 56 | |
scsi28 : usb-storage 1-2.4:1.0 | |
scsi 28:0:0:0: Direct-Access Nokia N900 031 PQ: 0 ANSI: 2 | |
sd 28:0:0:0: Attached scsi generic sg17 type 0 | |
scsi 28:0:0:1: Direct-Access Nokia N900 031 PQ: 0 ANSI: 2 | |
sd 28:0:0:1: Attached scsi generic sg18 type 0 | |
sd 28:0:0:0: [sdq] Attached SCSI removable disk | |
sd 28:0:0:1: [sdr] Attached SCSI removable disk | |
osscore: launch_output while not prepared. Engine=0 | |
osscore: Output interrupt when no buffer is allocated | |
osscore: Output interrupt when no buffer is allocated | |
osscore: Output interrupt when no buffer is allocated | |
osscore: launch_output while not prepared. Engine=0 | |
usb 1-2.4: USB disconnect, address 56 | |
usb 1-2.4: new high speed USB device using ehci_hcd and address 57 | |
scsi29 : usb-storage 1-2.4:1.0 | |
scsi 29:0:0:0: Direct-Access Nokia N900 031 PQ: 0 ANSI: 2 | |
sd 29:0:0:0: Attached scsi generic sg17 type 0 | |
scsi 29:0:0:1: Direct-Access Nokia N900 031 PQ: 0 ANSI: 2 | |
sd 29:0:0:1: Attached scsi generic sg18 type 0 | |
sd 29:0:0:0: [sdq] Attached SCSI removable disk | |
sd 29:0:0:1: [sdr] Attached SCSI removable disk | |
usb 1-2.4: USB disconnect, address 57 | |
usb 1-2.4: new high speed USB device using ehci_hcd and address 58 | |
scsi30 : usb-storage 1-2.4:1.0 | |
scsi 30:0:0:0: Direct-Access Nokia N900 031 PQ: 0 ANSI: 2 | |
sd 30:0:0:0: Attached scsi generic sg17 type 0 | |
scsi 30:0:0:1: Direct-Access Nokia N900 031 PQ: 0 ANSI: 2 | |
sd 30:0:0:1: Attached scsi generic sg18 type 0 | |
sd 30:0:0:0: [sdq] Attached SCSI removable disk | |
sd 30:0:0:1: [sdr] Attached SCSI removable disk | |
usb 1-2.4: USB disconnect, address 58 | |
usb 1-2.4: new high speed USB device using ehci_hcd and address 59 | |
scsi31 : usb-storage 1-2.4:1.0 | |
scsi 31:0:0:0: Direct-Access Nokia N900 031 PQ: 0 ANSI: 2 | |
sd 31:0:0:0: Attached scsi generic sg17 type 0 | |
scsi 31:0:0:1: Direct-Access Nokia N900 031 PQ: 0 ANSI: 2 | |
sd 31:0:0:1: Attached scsi generic sg18 type 0 | |
sd 31:0:0:0: [sdq] Attached SCSI removable disk | |
sd 31:0:0:1: [sdr] Attached SCSI removable disk |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment